I need to be able to verify that SSMS recognizes ONLY system generated session identifiers.
Where in the configuration of the DBMS can i see evidence of this setting, and / or change it if necessary?
I ran a SP that lists fragmented tables in our DB which listed almost all the tables and indexes in the DB. The list includes index names that start with "_WA_Sys_tablecolumn name_.....". Are these SQL Server generated indexes or are these statitics on the tables? What are they? If these are system generated indexes as I thought they were, how are they generated? Can these indexes be dropped or should one want to? IF so, how? Any effect on the DB performance if dropped?
Thanks for your advise.
Helen
Anybody had experience dropping the system generated index?
I tried to drop some auto-generated index which usually have name like _WA_Sys_[column name}_07F6335A. Then I follow the table.index name rule. It always show no such index exists in the database. But I can query these indexes in sysindexes and verify they are there. What went wrong?
Help appreciated very much.
wilson
Why are two log files generated when using a Text Log Provider with a Connection String property set to the following expression?
"c:\" + @[System::ExecutionInstanceGUID] + ".log"
I've set up package logging with a view to getting a unique, and linkable log. However, two files are always generated, no matter what the DelayValidation settings may be on the connection manager, file, and package tasks.
Hi.
Is there a way to supress a system generated error messages?
I have a stored procedure that I'm executing from Query Analyzer that updates a table and potentially generates a foreign key violation. I am trapping and handling the error, but the system generated message still displays. Is there a way to supress these messages (other than pre-checking for the condition prior to updating)?
Thanks,
Glen Smith
Where can I see system tables in SSMS?
------------------------
I think, therefore I am - Rene Descartes
Suddently System Databases Folder is not showing on Studio 9.0 for all the SQL servers instance. Do you know why ? Is there any option other than De-attach them?
I have been searching for a means to change the System Failure Error Check policy that comes as part of the Best Practice policies. I want to look back 24 hours. The WQL query shipped with the policy doesn't have a WHERE clause component that looks at TimeGenerated. That query looks like:
IsNull(ExecuteWql('Numeric', 'rootCIMV2', 'select EventCode from Win32_NTLogEvent where EventCode=6008 and Logfile="System"'), 0)
After searching for an example of how to do this and not finding any that are specific to PBM, I decided to fall back to a very basic approach - use wbemtest.exe to try out where clause additions and see how they work, then plug the result into the policy and see if it works. As a start, I tried the following query using wbemtest.exe:
select Event Code
from Win32_NTLogEvent
where EventCode = 6008
and Logfile = 'System'
and TimeGenerated > '20130101010000.000000–000'
This works great in wbemtest.exe. My next step was to plug this into the policy condition expression as follows: IsNull(ExecuteWql ('Numeric', 'rootCIMV2', 'select EventCode from Win32_NTLogEvent where EventCode=6008 and Logfile="System" and TimeGenerated > "20130101010000.000000–000"'), 0)
When I try to manually evaluate this policy in SSMS, I receive an "Invalid Query" error message.I assume that SWbemDateTime isn't available to use inside Policy Based Management policies. All the examples of how to handle the kind of dynamic date creation I have seen are for use in PowerShell, VBScript, or SSIS. I've played with using DateDiff, DateAdd, and GetDate inside the query string, with no success.
Why does the ExecuteWql above fail?Is it at all possible to dynamically generate a datetime (say, 24 hours ago) as part of the query string parameter of the ExecuteWql call?What might that look like?
We have a large number of SPs in our databases and decided it was time to get some source control. I have VSTS team explorer installed and working in visual studio, but I cannot get the plugin for SSMS to work - it just says none in the current source control plug-in dialogue box - nothing when I drop it down either.
Any ideas what I am doing wrong?
There have been some posts on the difficulties of handling csv with quoted identifers.
I heard there were some custom components that aid in dealing with these as input files.
IYO, what do you consider to be the best way to deal with csv with quoted identifiers as an input to an ETL operation?
Also, if you know of any bloggers making quality (hopefully free) custom components?
Thanks!!
Are Guids good or bad? I've spoken to people who hate them in databases, but the db's I'm using right now all use them, so there must be *some* people out there who like them. I'm interested to know what other people think.
thanks!
This query is the first time I am using the Unpivot syntax and I am coming across a problem. When I try to unpivot my data, I get the following statement:
"Msg 4104, Level 16, State 1, Line 2
The multi-part identifier "Table3.DocketId" could not be bound."
What is the cause of this issue?
Select
Table3.DocketId,
UP.AssignmentType,
Up.AssignedStaff
From
(
Select distinct
Table2.DocketId,
[Code] ....
I have a two tables each having a uniqueidentifier column person_id
I am trying to a select statement where I want a list of the person_id's in one table that are not in another table.
-- insert into wch_needed those who need checked
insert into #wch_needed (person_id, rendered_by )
select distinct e.person_id, e.rendered_by
from #wch_who o, encounter e
where o.person_id not in (select distinct person_id from #wch_have )
and o.person_id = e.person_id
the where conditional
where o.person_id not in (select distinct person_id from #wch_have )
does not work.
How can I do this?
I'm posting this in the ClickOnce forums as well...
My application doesn't include the .mdf and .ldf files, rather it creates the database the first time the application is run using a script that is included in the build. I want to create the database in the ClickOnce data directory. The problem I'm having is that SQL Server complains when I execute the CREATE DATABASE command as follows:
CREATE DATABASE [C:Documents and SettingsxxxxxLocal SettingsApps2.0DataPQCK6EXN.5KGAW630RPT.VGOifie..tion_014028c05b1d6ec6_0001.0002_0e86966f19503c89DataiFieldMobile.mdf] ON PRIMARY
( NAME = N'myDatabase', FILENAME = N'C:Documents and SettingsxxxxxxLocal SettingsApps2.0DataPQCK6EXN.5KGAW630RPT.VGOifie..tion_014028c05b1d6ec6_0001.0002_0e86966f19503c89DatamyDatabase.mdf' , SIZE = 3136KB , MAXSIZE = UNLIMITED, FILEGROWTH = 1024KB )
LOG ON
( NAME = N'myDatabase_log', FILENAME = N'C:Documents and SettingsxxxxLocal SettingsApps2.0DataPQCK6EXN.5KGAW630RPT.VGOifie..tion_014028c05b1d6ec6_0001.0002_0e86966f19503c89DatamyDatabase_log.ldf' , SIZE = 1024KB , MAXSIZE = 2048GB , FILEGROWTH = 10%)
END
Here's the error:
System.Data.SqlClient.SqlException "The identifier that starts with 'C:Documents and SettingsxxxxxxLocal SettingsApps2.0DataPQCK6EXN.5KGAW630RPT.VGOifie..tion_014028c05b1d6ec6_0001.00' is too long. Maximum length is 128."
Hello
I tried the Beta 1 of the service pack 1 to .net 3.5. If I try to add an entity (and try to save this), I get the Exception "No support for server-generated keys and server-generated values".
How can I add entities to my Sqlce- database?
I tried to give the id- column (primary key) in the database an identity, another time without identity, only primary key --> none of them worked. I always get the same error.
What do I have to change to make successfully a SaveChanges()?
Thanks for your help,
Gerald
The 2.0 version of ASPSTATE is slightly different than the 1.1 version in that one table has one additional column and another table uses a different data type and size for the key. The 2.0 version also has a couple additional stored procedures.
We'd like to manage just one session state database if possible so we're trying to figure out if Microsoft supports using the new schema for 1.1 session state access (it seems to work, but our testing has been very light).
Is there any official support line on this? If not, can anyone comment on whether or not you'd expect it to work and why?
Thanks.
I have created a windows library control that accesses a local sql database
I tried the following strings for connecting
Dim connectionString As String = "Data Source=localhostSQLEXPRESS;Initial Catalog=TimeSheet;Trusted_Connection = true"
Dim connectionString As String = "Data Source=localhostSQLEXPRESS;Initial Catalog=TimeSheet;Integrated Security=SSPI"
I am not running the webpage in a virtual directory but in
C:Inetpubwwwrootusercontrol
and I have a simple index.html that tries to read from an sql db but throws
the error
System.Security.SecurityException: Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
at System.Security.CodeAccessSecurityEngine.Check(Object demand, StackCrawlMark& stackMark, Boolean isPermSet)
at System.Security.PermissionSet.Demand()
at System.Data.Common.DbConnectionOptions.DemandPermission()
at System.Data.SqlClient.SqlConnection.PermissionDemand()
at System.Data.SqlClient.SqlConnectionFactory.PermissionDemand(DbConnection outerConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection,
etc etc
The action that failed was:
Demand
The type of the first permission that failed was:
System.Data.SqlClient.SqlClientPermission
The Zone of the assembly that failed was:
Trusted
I looked into the .net config utility but it says unrestricted and I tried adding it to the trusted internet zones in ie options security
I think that a windows form connecting to a sql database running in a webpage should be simple
to configure what am I missing?
Reporting services is configured to use a custom security extension in the following Environment.
Windows xp
IIS 5.0
when i go to http://servername/reports , the UIlogon.aspx page loads fine and i enter username and password. but i get logon failed.
when i go to http://servername/reportserver , the logon.aspx does not load and i get the following error message :
"Request for the permission of type 'System.Web.AspNetHostingPermission, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed."
any idea ? .
chi
Ok guys, I am trying to install Sql server 2005 on Vista but I am still stuck with this warning message in the System Configuration Check during Sql server 2K5 installation :
SQL Server Edition Operating System Compatibility (Warning)
Messages
* SQL Server Edition Operating System Compatibility
* Some components of this edition of SQL Server are not supported on this operating system. For details, see 'Hardware and Software Requirements for Installing SQL Server 2005' in Microsoft SQL Server Books Online.
Now, I know I need to install SP2 but how the hell I am going to install SP2 if Sql server 2005 doesn't install any of the components including Sql server Database services, Analysus services, Reporting integration services( only the workstation component is available for installation)?
Any work around for this issue?
P.S.: I didn't install VS.NET 2005 yet, can this solve the problem?
Thanks.
Hello!
Hopefully someone can help me.
I have scripts to refresh database as SQL daily jobs. (O.S is Win2K3 and SQL server 2000 and SP4) It was worked and I got the following message this morning from SQL error log.
Internal I/O request 0x5FDA3C50: Op: Read, pBuffer: 0x0D860000, Size: 65536, Position: 25534864896, RetryCount: 10, UMS: Internal: 0x483099C8, InternalHigh: 0x0, Offset: 0xF1FF1E00, OffsetHigh: 0x5, m_buf: 0x0D860000, m_len: 65536, m_actualBytes: 0, m_errcode: 1450, BackupFile: \XAPROD12MASTERXAPRODXAPROD_db_200701290000.BAK
BackupMedium::ReportIoError: read failure on backup device '\XAPROD12MASTERXAPRODXAPROD_db_200701290000.BAK'. Operating system error 1450(Insufficient system resources exist to complete the requested service.).
Hi All,I use Bulk insert to put data to myTable.When the SQL server is in local machin, it works well. But when I putthe data in a sql server situated not locally, then I get a errormessage like this:Could not bulk insert because file 'C:Data2003txtfilesabif_20031130.txt' could not be opened. Operating systemerror code 3(The system cannot find the path specified.).BULK INSERT myTableFROM 'C:Data2003 txtfilesabif_20031130.txt'with (-- codepage = ' + char(39) + 'ACP' + char(39) + ',fieldterminator = ';',rowterminator = '',keepnulls,maxerrors=0)Someone can explan me what the error shows upThanks in advance- Loi -
View 3 Replies View RelatedHello,
I am getting the following error from my SqlClr proc. I am using a third party API, which is making call to some webservice.
System.InvalidOperationException: There is an error in XML document (11, 2). ---> System.ArgumentException: Item has already been added. Key in dictionary: 'urn:iControl:Common.ULong64' Key being added: 'urn:iControl:Common.ULong64'
System.ArgumentException:
at System.Collections.Hashtable.Insert(Object key, Object nvalue, Boolean add)
at System.Collections.Hashtable.Add(Object key, Object value)
at System.Xml.Serialization.XmlSerializationReader.AddReadCallback(String name, String ns, Type type, XmlSerializationReadCallback read)
at Microsoft.Xml.Serialization.GeneratedAssembly.XmlSerializationReader1.InitCallbacks()
at System.Xml.Serialization.XmlSerializationReader.ReadReferencingElement(String name, String ns, Boolean elementCanBeType, String& fixupReference)
at System.Xml.Serialization.XmlSerializationReader.ReadReferencingElement(String name, String ns, String& fixupReference)
at Microsoft.Xml.Serialization.GeneratedAssembly.XmlSerializationReader1.Read5926_get_failover_stateResponse()
at Microsoft.Xml.Serialization.GeneratedAssembly.ArrayOfObjectSerializer8221.Deserialize(XmlSerializationReader reader)
at System.Xml.Serialization.XmlSerializer.Deserialize(XmlReader xmlReader, String encodingStyle, Xml
...
System.InvalidOperationException:
at System.Xml.Serialization.XmlSerializer.Deserialize(XmlReader xmlReader, String encodingStyle, XmlDeserializationEvents events)
at System.Xml.Serialization.XmlSerializer.Deserialize(XmlReader xmlReader, String encodingStyle)
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at iControl.SystemFailover.get_failover_state()
at F5CacheManager.GetActiveLBIPaddress()
Found a similar problem in a different thread, but couldn't find any solution. I was wondering if there is an open case for this issue?
https://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=398142&SiteID=1
Hi,I have a few things on my databases which seem to be neither true systemobjects or user objects - notably a table called 'dtproperties' (createdby Enterprise manager as I understand, relating to relationship graphingor something) and some stored procs begining with "dt_" (some kind ofsource control stuff, possible visual studio related). These show up whenI use"exec sp_help 'databaseName'"but not in Ent. Mgr. or in Query Analyzer's object browser, and also notin a third party tool I use called AdeptSQL. I am wondering how thosetools know to differentiate between these types of quasi-system objects,and my real user data. (This is for the purpose of a customized schemagenerator I am writing). I'd prefer to determine this info with systemstored procs (ie sp_help, sp_helptex, sp_...etc) but will dip into thesystem tables if needed.Thanks,Dave
View 1 Replies View RelatedHi all,
I need some solution..
When i execute a program it first deletes all datas from a
'X' table .Then fetches data from various other tables and
inserts into this 'X' table.I finally generate a report from
this 'X' table.
Now the problem is,
USER 1 : Executes the program - Datas in 'X' table got deleted and
filled up with new data.Report is getting processed.....
USER 2 : Executes the same program - Datas in the same 'X' table
getting deleted ..
So the report process of USER 1 got affected.
Solution 1 : Using IP address of local machine i solved the problem.But
i need a concrete solution for this ..something related to sessions..
CAN ANYONE HELP ??
Thanx and Regards
Prabhu
Does Session term exist in SQL Server?If yes, when it creates, how can monitor it. And where does itsinformation store?Thanks alot
View 1 Replies View RelatedWhere is the sql generated by aspnet_regsql.exe saved?
View 2 Replies View RelatedHow do you return the ID of an item to a Session in a ASP forum?
I have a MS-SQL Server 2005 database.
My table looks like this QuoteID, QuoteNumber, Date.
In SQL:
INSERT INTO table (QuoteNumber, Date) values ('123490WC1", '06/2/2008')DECLARE @ItemID INTSET @ItemID=IDENT_CURRENT('table')
What I would like to do is return @ItemID to the ASP forum; I assume Session would be the best.
After I get the @ItemID I have a Grid which I will to insert the Quote Items into.
Thanks,
marly
Hi, Can somebody tell me what's wrong with this statement or why the Session parameter is not working.
<asp:SqlDataSource ID="datalist_SQL" runat="server"
ConnectionString="<%$ ConnectionStrings:DatabaseConnectionString2 %>"
SelectCommand="SELECT * FROM tbl_subProduct, tbl_material, tbl_product, tbl_subCategory, tbl_topCategory, tbl_topLevelProduct WHERE [tbl_subProduct].[numProductID] = [tbl_product].[numProductID] AND [tbl_product].[numTopLevelProductID] = [tbl_topLevelProduct].[numTopLevelProductID] AND [tbl_topLevelProduct].[numSubCategoryID] = [tbl_subCategory].[numSubCategoryID] AND [tbl_subCategory].[numTopCategoryID] = [tbl_topCategory].[numTopCategoryID] AND [tbl_material].[numMaterialID] = [tbl_product].[numMaterialID] AND @fldArray ">
<SelectParameters>
<asp:SessionParameter Name="fldArray" SessionField="ids_array" Type="Int32" />
</SelectParameters>
</asp:SqlDataSource> Many Thanks
Hi...
I'm developing a web app with VS 2005 Beta and I do not know how to include a seasson variable value into my code.
This is my code:
Function GetData() As System.Data.SqlClient.SqlDataReader
Dim sqlconn As System.Data.SqlClient.SqlConnection
Dim SqlCommand1 As System.Data.SqlClient.SqlCommand
Dim sqlRdr As System.Data.SqlClient.SqlDataReader
sqlconn = New SqlConnection("SERVER=SRVR;UID=USR;Password=PWD;DATABASE=MyDatabase")
sqlconn.Open()
SqlCommand1 = New SqlCommand("MyStrProc", sqlconn)
SqlCommand1.CommandTimeout = 1800
sqlRdr = SqlCommand1.ExecuteReader(CommandBehavior.CloseConnection)
Return sqlRdr
End Function
MyStrProc is:
CREATE PROCEDURE MyStrProc
@MyVar int
AS
IF @MyVar IS NOT NULL
BEGIN
.................
......t12.acct_nbr IN (@MyVar)
.....
END
GO
The variable @MyVar get its value from user log info in login page, and create a session variable.
My Question:
How and where to call seasson variable @MyVar, because now I'm getting this error:
Procedure 'MyStrProc' expects parameter '@MyVar', which was not supplied.
Any help will be great.
Tks
I'm new on ASP.NET 2.0Can anyone tell me how to get data from SQL to Session properties?
In Classic ASP, it looks very simple as below.dim connset conn = server.createobject("adodb.recordset")rssql = "select myid, mypw from mydb where myid = '"& request("myid") &"' and mypw = '"& request("mypw") &"'"set rs = conn.execute(rssql)if rs.eof = true thensession("myid") = rs("myid")session("mypw") = rs("mypw")end if
How to do the same things on ASP.NET?Many thanks!
Hi,
How can I retrieve generated identity value after insert a row into table in case I can identify inserted row?
(the INSERT statement is dynamic constructed and queried from data access layer, not in stored procedure)
Thanks,
How to find user session id in mssql
View 1 Replies View RelatedHi:
I want to open a new session/connection inside the execution of a stored procedure. Is this possible ?
I ask this because I need a new sesssion with its own transaction.
Thanks,
Rui Ferreira