SSRS 2005 Report Prints Blank Pages
Nov 12, 2007
I am very new to Reporting Services. When I set the report to landscape, either by setting width and height at 11 X 8.5 when in layout, or by setting landscape in page setup when I am in preview, a blank page prints in between each report page. I've checked the forum, and tried setting margins to 0, but have not had any success. I saw this response:
the body width plus margins should be less than the defined page width. but I'm not sure what settings are being referred to
Has anyone been able to solve this problem?
Thanks very much.
Sue
View 3 Replies
ADVERTISEMENT
Mar 20, 2008
Hi,
I've created a simple .rdl report and seems to show the preview under my visual studio. But, when I add the .rdl file into the server and export them to be a .PDF, The pdf is created with two blank pages for every single page with data.
Please comment me to fix this.
Thanks.
View 5 Replies
View Related
Nov 13, 2007
I created a report with multiy pages and in between every page of data is a blank page. If the Report is Sixteen pages long i get eight blank pages. The Body size of the report is 8.5in, 25.475in. The Report porperities or 8.5 x 11in. Each page has a table with a page break at start set to true. But I still get blank pages in between the report.
View 4 Replies
View Related
Mar 4, 2008
Hi,
I have a master report that contains 4 sub reports. The first two subreports contains matrix controls that can (and will) spill over to a second page. With 5 columns of data the matrix subreports fit nicely onto one page, 6 or more columns and they will spill into a second page. The second two subreports will always fit onto one single page. All four subreports are inside a list control which will repeat for each structure. e.g. Each subreport will be rendered once per structure.
The master report renders perfectly (with no blank pages) whenever the two subreports with the matrix controls fit on one page each. However, whenever the matrix control subreports spill into a second page it causes the master report to insert a blank page after subreport 3 and 4, bare in mind subreport 3 and 4 both fit perfectly on a single page. I've check all margins and page widths etc.
The blank page problem only occurs whenever the matrix needs to span two pages.
Anybody encountered this problem or have any ideas how to fix it? I'm beginning to think it is a bug with reporting services.
Regards,
Adrian.
View 3 Replies
View Related
Mar 26, 2008
Hello,
I printed Browser Report,but it is getting Blank pages in middle,
that is header part only visible for 2 pages and then data getting printed,
any ideas??
View 2 Replies
View Related
Aug 1, 2005
I wrote a report today containing one grouping. Everything appears all right in the report preview, except that every other page is "blank", i.e., shows only the page header and page footer; all grouping and detail information is missing.
The data on the page following the blank page seems to pick up where the previous non-blank page left off, so all information seems to be present within the report.The report width and height properties are typical portrait-style -- 8.5 x 11 inches. The columns do not "run off the edge" of the report page boundary. I haven't selected any page break for the grouping, as the grouping detail is typically only a few rows long, and would otherwise result in a very large number of pages.
View 21 Replies
View Related
Oct 11, 2007
Hi there.
We have a report that has been working fine for almost a year and just recently we found a bug that when we print, the 1st 3 pages each have a single line from the table header and then the details of the table print.
The report table does have 2 subreports in detail rows. We have diligently checked to make sure that the sizes fit in both the main report and the subreports and we know that the report version did not change.
After a little digging we discovered that we recently patched RS to be version 9.2.3042. When we run the report on another RS server that is running 9.00.1406.00, it works fine. Do you know if this could be the cause? If so, is there another patch that addresses the issue?
Any help would be appreciated.
Thanks, Mike
View 3 Replies
View Related
Sep 14, 2007
Hi All
I have a report that looks and works fine in the native 'screen layout' but when I select the Print Layout option, a blank page is inserted after each page. These blank pages contain the header and footer, but not the body section of the report. Has anyone else seen this sort of thing? Is there something in my report layout causing this, or is it a bug in the Print Layout rendering?
Thanks much
View 3 Replies
View Related
Apr 16, 2008
Hi every one,
I am facing problem in printing the reports from browser and also when i export it to pdf,the problem i am facing is blank pages are coming when report column getting the large amount of text around 2500 characters into column value.
can any one help me in this issue?. if the report is getting acceptable amout of data it is printing in proper way i.e no balnk pages at all.i maintained all properties like margins+body size < page size.
View 4 Replies
View Related
Sep 21, 2015
I have a ssrs report having 2 tables in with 4 columns in each. When I go to export option in preview I can see all data coming in one excel sheet, But I am trying to get 2 tables in 2 different pages in Excel when I export.First page of excel comes with first table data with 4 columns and second page of excel comes with second table data with 4 columns .
View 2 Replies
View Related
Oct 19, 2007
I created a report that uses a parameter to return a record per page basically, but it doesn't return all records that match the parameter. Thoughts?
Specifically, I have a table that tracks various sites my engineers are responsible for; each have about twelve. The problem is that every time I select an engineer I only see six pages (records). When I select two or three, then I see 12 or 18 pages, but still just six records per engineer.
Any help is greatly appreciated! Neil
View 1 Replies
View Related
Sep 25, 2007
Hi,
I am using SSRS to generate a 4 page statement... So i have a plan whose no. of Participants is 3271 rows... so While we try to export them to a PDF we will have around 13084 pages... but we cannot export so many pages at one time (it craps out). so right now we are breaking it up by start part and stop part and creating a pdf..
Is there a way that SSRS can handle so many pages at one go without any problems... if so how ??
Regards
Karen
View 18 Replies
View Related
Sep 1, 2011
We have recently upgraded to SP1 of SSRS 2008. As a result, when we export a blank report to CSV, we now get a line of commas below the headings. Or found a way to not include the commas?
New SSRS Output
Portfolio_Reference,Portfolio_Name,R,TR,TD,TC,D,
Old SSRS Output
Portfolio_Reference,Portfolio_Name,R,TR,TD,TC,D,
View 4 Replies
View Related
Sep 22, 2015
I have a set of SSRS reports published on the server. It can be accessed through a web application or through SharePoint. Most of the reports work fine through both - web app and SharePoint. However, one of the report, which returns large amount of data has some problem:
1. It generates fine from web app
2. It generates fine from SharePoint; only if one or two values selected from Filter dropdown
3. However, if all items (about 20 items) selected from Filter dropdown... and click on View Report, it processes for a while and then shows nothing. The page remains blank.
Did some research and felt the problem is with Distributed Cache Service.
Tried restarting it; tried changing SPDistributedCacheClientSetting settings - requestTimeout, channelOpenTimeout... but didn't work.
I checked Event Viewer logs, SharePoint logs and SSRS logs but couldn't find any relevant error messages.
View 5 Replies
View Related
Apr 19, 2007
Hello all,
I have developed a report that when displayed in page layout view is giving me blank pages with only heaer & footer information even though none of my groups have page breaks designated. This also occurs when exported to PDF.
Can anyone provide some information on why this is occurring and how to remedy it ?
Thanks.
View 1 Replies
View Related
Apr 1, 2008
when I open report on report service it consist two pages, it's correct
but if I export report to pdf file I get two additional blank pages
it looks like - first correct page with data - blank page with header - second correct page with data -blank page with header
why I get two blank pages with data ?
View 7 Replies
View Related
Feb 5, 2008
Hai,
I'm currently working in SSRS 2000. While exporting a report to PDF format, some blank pages are being added in the PDF file. Can you suggest me how to take them off. It is an urgent requirement and any feedbacks are appreciated.
Thanks in advance.
Krishna Chaitanya
View 8 Replies
View Related
Jul 24, 2007
Hi,
I am very new to SSRS. I developed a report which has two subreports in it. Blank page is generated at the end of each Page. Can any one help me how to avoid this.
View 1 Replies
View Related
Jul 18, 2007
I ahve a report, that has 24 fields in the layout. When I tried to print the reprot, it prints BLANK pages, in between and at the start. I have confirmed that the width BODY of the report, < width of the report properties. It still prints blank pages.Pl advise.
View 1 Replies
View Related
Jun 1, 2007
I am using a matrix control in a report containing 2 subreports. The matrix control is present in one of the subreports. When I export the full report into the PDF,if the matrix are rendered in a single page, the report is fine and there are no blank pages. But when the number of columns exceeds the first page and moves into the second page then there are 3 blank pages in the report for every page with content. The number of blank pages after each page with content is equal to the number of times the matrix would scroll into a new page.
This problem occurs only when I try to generate the whole report in PDF. No blank pages appear when I render subreports into PDFs individually.
Please help!!
View 1 Replies
View Related
Oct 22, 2007
HI All,
When I view my reports in PDF format, I can not view the whole report on a single page. Thats fine with me. But the problem is report is appear on every other page. not on continuous pages. How can I avoid blank pages?
Thanks
View 7 Replies
View Related
Jul 23, 2007
Hello,
I have a fairly large report with multiple matrix tables. They grow to a fixed width horizontally and may grow to various heights vertically. I have the interactive height set to zero so that it displays on the web page on one screen. When I go to print this report, I am getting a blank page between each page with data. Here are my dimensions:
Report:
height: 15 in
width: 8.5 in
interactive height: 0 in
interactive width: 8.5 in
left margin: .5 in
right margin: .5 in
top margin: .5 in
bottom margin: .5 in
Body:
height: 13.3875 in
width: 6.9 in
Would this problem be due to the fact that my matrix tables span an area greater than a normal page height in design mode even before they grow dynamically? Any suggestions would be appreciated.
Thanks.
View 1 Replies
View Related
May 16, 2008
Hi All,
In my SSRS report. I have a report which has only one page. In preview it is showing as only 1 page but when I am printing the report. I am getting two printouts with the second page as a blank.. Please help me in printing the page that contains report. Intially I used a Page header, at that it used to print the blank page with a header only. Now as I removed the header it is printing the page without header i.e Blank Page.. So please help me in prinitng a single page that has the report. It is urgent,..
Thanks
dotnetdev1
View 5 Replies
View Related
May 23, 2015
I have the SQL code for one of the select list columns as shown below in the SSRS Data set query level.
Example : Select IsNUll(max(ET.[# Utilizations by Utilization Method]),0) as [Employee Period Total]
SQL Result Set Output :
0
0
0
The above code when run in SQL displays correctly with zeroes if NULL values are available from the Source tables.Now at the SSRS Report level design I have grouped with more than one values.Even at the expression I have given =Fields!Employee_YTD_Total.Value but report output displays blank In order to evaluate 0 from the SQL result set I even tried equating the values to 0 like = Iif(Fields!Employee_YTD_Total.Value = 0 ,0,Fields!Employee_YTD_Total.Value) but still the report outputs is blank.
Issue/Query : Why it displays blank and I should have this as 0 in the report output to eliminate blank as this would be not appropriate to the end users to validate. What has to be changed either at the SSRS level or at the SQL level.
View 3 Replies
View Related
Nov 18, 2007
Here is a situation in my company:
We have an Office SharePoint 2007 site, we developed a couple of web parts and added them to our site. We used SQL Server Reporting services 2005 as our reporting solution. The reports are hosted on the report center and when we need a report, we open it by sending a URL requesting the report, passing the report parameters in the URL query string. So the report is filtered based on the parameters passed from the web parts.
But since best practices say that you should host reports directly under SharePoint, by configuring the reporting services to run in the SharePoint integrated mode. We followed the steps and installed SharePointRS and we finally succeeded to publish the reports to a SharePoint folder, but we had a limitation: we are unable to pass the report parameters internally to the report hosted in SharePoint. If we passed them in the query string as the report center case, SharePoint neglects them totally.
So the question is: how can I pass parameters internally between a SharePoint web part and a SQL server 2005 reporting services report hosted in SharePoint?
View 1 Replies
View Related
Nov 7, 2007
While exporting a SSRS 2005 report in CSV format ,can we include the report headers and footers also to be exported .
Thanks .
View 1 Replies
View Related
Jun 4, 2007
I have RS 2005 SP1. I have a report model developed and deployed.
I have a scenario and I am not sure if it is possible to create a report for this scenario using the report builder. Let's say I have a customers entity and address entity that is related to the customer's entity as a 1-many relationship. I have the effective date on the address that specifies the date from which the address is effective. A customer will have multiple records in address with the latest effective date as the latest address of the customer.
Suppose, I need to create a report using the report builder to get the list of latest address for customers, how can I do it? I know it can be done using the report designer using a query that uses the group by clause. But can it be done using report builder?
Thanks in advance.
View 4 Replies
View Related
Apr 17, 2007
Dear All,
I am basically new as far as SQl server 2005 concern.
I want to try out reporting services provided by sql server 2005.
That is make report using sql server 2005 and call that report from web or window application.
Please guide me in doing so or give me some useful link.
Thanks
View 1 Replies
View Related
Jun 26, 2015
Say I have a report with 3 pages, each page has a different dataset and takes some processing time.
is it possible to give the user the option to just run the first page say if thats all they need?
Reduce the processing time of the report to only that that is necessary?
View 2 Replies
View Related
Mar 27, 2007
I want to make the ReportServer and Reports pages secured i.e not allow anyone to access these pages via browser.
I login to a machine as user ABC. This user does not have permission on reports.
if this user accesses ReportServer or Reports, expected is that access should be denied unless I enter
an account that has been given permissions.
for e.x. following pages should be secured.
http://<reportserver>/Reports
http://<reportserver>/Reports/Pages/Report.aspx?ItemPath=%2f<Report_Project>%2f<Report_Name>
http://<reportserver>/ReportServer
http://<reportserver>/ReportServer?%2f<Report_Project>&rs:Command=ListChildren
Actual result is that I am able to access these pages. When I click on the report I get the error (this is expected)
but then user ABC should be shown error on first page itself.
In short, for all the accounts that do not already have permissions on reports, the server should challenge me to enter an account and password.
Is there some setting in the configuration file?
Any help would be appreciated
Thanks in advance!
View 7 Replies
View Related
Jan 18, 2008
We have been, successfully, using SSRS 2005 with SQL databases. Now are trying to do create SSRS 2005 reports using an Oracle database. What components do I need to install on our SSRS 2005 server to successfully render a report, in a web browser, using an Oracle 9i database. Any help would be appreciated.
View 15 Replies
View Related
Nov 19, 2007
We are currently designing a report which we hope is possible. Each month the clients employees upload receipts as PDF's to the network and then fills out their form as needed.
We are planning to upload the PDF's to a Microsoft Office 2007 sharepoint site which we would like to then pull out and use as being part of the report.
So page one will be a list of expenses pulled from a database table and the remaining pages will then be the PDF's showing as part of the report. I have seen the Jump to URL option but that presents a hyperlink option only. I need to see the actual pdf in the report.
Has anyone done anything similar where they have extract a PDF to show in a SSRS 2005 report
Many thanks
View 1 Replies
View Related
Feb 8, 2006
I don't know how best to explain this but will try.
In my SSRS 2005 report, i have one group in my table. In that group, I have a field that for each company record in my dataset, this field value is repeated for each record. This is a transactions table so you'd expect several records in the dataset for each company..that's not the problem.
example data from dataset:
TransID CompanyID FeeGoal
1 1000 100
2 1000 100
3 1000 100
4 2000 400
5 2000 400
My SSRS 2005 Report has:
Group1 fields:
CompanyID FeeGoal
=Fields!CustomerNumber.Value =Fields!FeeGoal.Value
The output when previewed looks like this:
Company FeeGoal
1000 100
2000 400
Footer 209409730.83 (totals up all feegoals! not just unique instances!)
I have a footer, and this is where the problem comes in. I am not able to sum 100 + 400 because if I do a SUM(=Fields!FeeGoal.Value) It doesn't just sume up 100 + 400 but rather (100 + 100 + 100) + (400 + 400)
I can't find a way to sum up basically the top values for FeeGoal which is really what the Group Field is doing since I get 100 and 400 in my group field for feeGoal. I should end up with a total of 500 for my footer total for Fee Goal but not sure how to get this to work in this unique situation.
FYI: FeeGoal is an input from an ASP.NET form to allow managers to update that one column in my report so that other calculations can rely on it in my group fields. Once the user finishes, I run a stored proc to insert that fee goal in every customer transaction record / feegoal field
I guess is there a way to do some sort of Distinct SUM in an expression? I also tried:
=SUM((Max(Fields!FeeGoal_AZ.Value)) / Fields!FeeSchedule.Value) * 100)
but you can't have an aggregate function like this, I get this error:
[rsAggregateofAggregate] The Value expression for the textbox 'GrossGoal_gt' contains an aggregate function (or RunningValue or RowNumber functions) in the argument to another aggregate function (or RunningValue). Aggregate functions cannot be nested inside other aggregate functions.
Build complete -- 1 errors, 0 warnings
View 27 Replies
View Related
