Hi,
i am developing report in SSRS 2005. how to add the database field at the runtime when report is running.i e. when i click on the preview tab, how can i add column there in the report?
can anybody guide me?
thanks & regards,
Vishruti.
Hi, I am looking for some guidance on the way to go for achieving the task described below.
View 2 Replies View Related
hi,
I have a trouble in filtering with SQL reporting services 2005 (SSRS). Please help me in clearing this issue.
I have a textbox and an dropdownbox with all the column names of a table in it. I will be entering some text in the textbox and will select a column name in the dropdownbox. I should get a result by checking the value of the textbox in the selected colum from the dropdownbox.
I give the query in where condition as: "(@dropdownvalue LIKE @Textboxname) ", which is not working.
Thanks in advance,
John.
In SSRS 2005, how to get the address bar URL. Is there any built-in function?
View 7 Replies View RelatedHi frineds,
i created the 1 report with pie chart ,but i am unable to display the values in the pie chart region inside the each colors
i am displaying the marks of a studnet ,but here
just like for each region we need the value HOW TO SET please help me in the properties or else (WHERE ?)
-------------------------
10 (red color)
-------------------------
30 (green color)
--------------------------------
I have written a custom rendering extension for my reporting services. In one of my function inside custom rendering assembly, I want to access the underlying dataset and manipulate with it. I gain some knowledge on dataextension but not able to use it successfully. Can someone please help me get to underlying dataset?
Thanks.
Hi,
I'm using SSRS 2005 which connects to SQL Server 2005. I need to pass Multi valus for single parameter...
E.g. Command type : Text
SELECT * FROM COUNTRY where CountryId IN ( @CountryID)
If i tried to preview using single parameter, it shows the record without any problem. However when i tried to put multi values, it gives error message?? I read somewhere which says, need to set to multivalue. But, i could not find the place to set the multi value option...
How to solve it?? Your suggestion/recommendations greatly appreciated.
Thanks
rama
Hi All,
I installed SQL Server 2005 SP2 recently. After that when I try to
deploy a solution in SSRS 2005, I get a dialog box with title:
"Reporting Services Login". It has my server listed as the first row:
"http://localhost/reportserver" and then it has two text boxes asking
for Username and Password.
I checked my IIS settings and only Integrated Security is checked for
the Reports Server folder (and for the entire website). I tried to
change that to Allow Anonymous Access = Checked, but still the same
problem.
Any ideas?
Thanks! GB
We're migrating from SSRS 2005 to SSRS 2008. We use itextsharp (a pdf processing library) to merge different PDF outputs into one large PDF file. This was working brilliantly in SSRS 2005, but in SSRS 2008, itextsharp *can* open and parse the PDF, but itext sees the "content" section of the PDF pages as blank. So, the resulting composite PDF ends up being a series of blank pages. Acrobat 9 and a couple other PDF tools (tested linux Evince and win GIMP) seem to be able to open the SSRS 2008-generated PDF fine, but the java-version of itext, and the .net version of itext (itextsharp) see nothing but blanks.So, I realize this points to a problem with itext, but I'm curious if merging PDFS outputed from SSRS 2008, and what PDF tools/libraries they are using.
View 7 Replies View RelatedHello,
How can I stop a report I started by using:
ReportExecutionService rs = new ReportExecutionService()
.
.
.
rs.Render(...)
I need to stop the report when a user clicks a button in my aspx page.
TIA
gad
I'm trying to add a custom report format to ssrs 2005 as per this [URL] I've added the code snippets in the example to three different ssrs 2005 server RSReportServer.config files but it does not work i.e do not show up in the export drop down when rendering report.
I've tried starting and stopping reporting services and it still does not works.
I've also modified the existing csv extension  with different options to see if it works but to no avail.However it works with SSRS2008 R2 . In fact it works right after I saved the config file, no restart needed.For SSRS2005 the file is in C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesReportServer. I checked the registry setting  just to make sure I'm looking at the correct installation 'HKEY_LOCAL_MACHINE', 'SOFTWAREMicrosoftMicrosoft SQL Server90ToolsClientSetup', 'SQLPath' The three ssrs2005 instances are in three different physical servers and the problem is with all of them so it is not an isolated incident. I've dbowner rights to all three servers. The server versions are 9.0.4060, 9.0.4035 and 9.0.4053
I have got this matrix and I am trying to calculate the average amount of working days in a month. At the moment, I have divided the total number of jobs by 21 for every month which is a hard coded value. However, I am not sure how to retrieve this value dynamically. Is there any formula that can find out the working days?
View 7 Replies View RelatedCurrently we are using Custom Delivery Extension for SSRS 2008R2 We are planning to move it SSRS2012
My Question is: Whether we can use the same Code used for SSRS2008R2 to SSRS2012?
if not what code changes we should do?
I have a list of customers in my Customers table. What I am looking to do is to create QR codes for each customer in Reporting Services. I need to include the customer name, address, postcode, telephone number and contact name.
View 5 Replies View RelatedI need the Trend line for the following data in Line chart they are the following data. The following are the graph are my output and i need the trend line for these Key_gap value.
This is the link [URL] ....
I need the same trend line for the Bar-Chart in SSRS 2005.
Is there any way to get the report toolbar using SOAP Api  in SSRS reporting.
View 6 Replies View RelatedWe've got a requirement to build the real time report. user can browse report at any point of time and need to see the latest data(stock market) in the report.
I've few options down...
1. Directly point to OLTP database as source and write stored procedure to show result set.
2. Replicate the database and write the SP's to reports. To avoid pointing directly to OLTP db.
3. To build the datawarehouse with dim & facts to show it in reports. I prefer this as a standard method, but this would have some latency depending on trasaction load which will differ from the requirement.
Hi,
Does anyone know of a link or list that has all the parameters for the "rs:" section of the URL access parameter, except for the ones in the Microsoft books?
Thanks,
Is it possible to write SSRS 2008 reports to run on an existing SSRS 2005 server?
If yes, what do I need to do to be able to write SSRS 2008 reports on my developer PC that will run on the SQL 2005 Server (which also has SSRS 2005 installed on it)?
I installed Visual Studio 2008 beta on the development PC and it appears that it needs SSRS installed on it too. So I installed SQL 2008 SSRS (SQL Server Reporting Services) and SQL 2008 Workstation Components onto the developer PC. Next I run the SQL 2008 "Reporting Services Configuration" tool. When I click on the "Web Service URL" section it hangs indefinitely and I have to force it closed.
The developer PC is Windows Vista Business.
Any suggestions on making this work, or any other information that you can think of that would allow me to use Visual Studio 2008 and the SQL 2008 "Report Designer Preview" tool to develop SSRS reports that will run on the SQL 2005 SSRS server?
Thanks!
-ErikR
Hi,
We are in need of migrating SSRS subscriptions along with the reports. Could you please let me know the process ?
I really appreciate your help on this.
Thanks,
Sam
We have SCCM 2012Â primary site and Remote SQL 2012 server. Due to hardening and password reset we are facing reporting issue.
while we Open the SRS report in SQL server and try to edit the Report (Report Builder) we are getting following error due to which we are unable to configure Reporting Service point in the SCCM 2012 server. We created the New Reporting server database still we are getting the below error.
Hey everyone...I'm completely new to SQL Server and I'm trying to learn the Reporting Services tool. I just installed SQL Server 2005 and selected to install all the options, atleast I'm 99.99% sure I did.
When I go to launch Report Services Configuration, I get "No report servers were found on the specified machine. Details: Invalid namespace". Do I need IIS for this to work?
Also, I do not think the AdventureWorks database was installed, I cannot seem to find it anywhere. I have tried to go back through and reinstall it, but it says that it is already installed.
Also, is there a certain order that you are supposed to install things? i.e. SQL Server before Visual Studios?
Thanks in advance.
*Edit* BTW, I'm using Windows XP, SQL Server Enterprise Edition, and VS.NET 2005.
In SAP BI we have capacity for Exception Reporting under BEx Query Designer.
ie
· Determining threshold values or intervals that are given a priority (bad, critical, good). The priority given to an exception corresponds to pre-assigned colors that become more €˜intense€™ the greater the deviation. Up to 9 different shades of the traffic light colors red, yellow, and green are used. These traffic light colors are also used in the alert monitor to display the results of exception reporting.
Do we in SSRS have the aforesaid capacity?
I have seen IIF function but it act as a flag not actually color that particular cell or am i missing something.
ie
Code Snippet
Color Code
=iif(RowNumber(nothing) Mod 2, "Silver","White")
Is it possible to have my pop up SSRS box size according to the size of the returned value? Issue is, i have a text box that returns a note field and depending on the number of notes, it can and will vary in size. I am currently using this code
="javascript:void window.open(" &"'"& Globals!ReportServerUrl &"/Pages/ReportViewer.aspx?"
&Globals!ReportFolder &"/Patient%20Eligibility&rc:Parameters=False&rc:Toolbar=False
&VPATIENTPROFILEID="& Fields!PatientProfileID.Value
&"
','DetailsWindow','left=300,top=180,width=920,height=455,status=no,menubar=no,scrollbars=yes,location=no'"Â &
")"
I have a requirement to convert reports from Crystal Reports to SQLServer Reports. Is there any tool to do this? or Do I need to redesignevery report in SQL Server Reports?Madhivanan
View 2 Replies View RelatedI am using VS 2010 and the SSRS that came with it. I am sure its SSRS 2008. Anyway, I added a report file to the project, added an ObjectDataSource and connected this to SQLServer 2008, and display the dataset on the report. The report is using ScriptManager, ReportViewer1, and Report1.rdlc file. I preview the dataset and I have multiple row returned. The problem is I only have one row displayed on the report. Maybe I did a quick and dirty report? What setting of properties did I missed?
View 8 Replies View RelatedI have to convert 'While Do' loop logic in Crystal to SSRS. How to use loops in SSRS.
View 12 Replies View RelatedWe are trying to use reporting services to execute a url when the SSRS report is executed. For example when I execute a SSRS report I would like the report to automatically access [URL] (as an example). The reason we are doing this is we want to access another reporting application but record the number and times of access via the reporting services execution tables/views. Is this achievable by putting some code in the Report properties. Can you open - execute url and then close report via some code.
View 3 Replies View RelatedI have a Manager dashbord  report.In this report 1st page contains some tables and 2nd,3rd page contains line charts with tables.Actually what we need is in 1st page tables are pretty simple,we need to add kpi's and shown these tables in kpi. kpi in ssrs and how to add kpi in ssrs reports?
View 2 Replies View RelatedI have tried different techniques to design the report but no luck,
1) design staff 5 days schedule as a calendar between two dates andÂ
2)each staff can have more than one schedule on the same day.
3)Only one staff per page.
4) week will start based on date  ex: for staff 2 calendar will start based on date.
Wednesday  Friday    Tuesday   Wednesday   ThursdayÂ
01/01/14 Â Â 3/01/14 Â Â 7/01/14 Â Â 8/01/14 Â Â Â Â Â 9/01/14
Sample data:
expected format:
Staff1 (page 1)
Monday    Wednesday   Friday   Monday
13/10/14 Â 15/10/14 Â 17/10/14 Â 20/10/14
Staff 2 (page 2)
Wednesday  Friday    Tuesday   Wednesday   ThursdayÂ
01/01/14 Â Â 3/01/14 Â Â 7/01/14 Â Â 8/01/14 Â Â Â Â Â 9/01/14
(page 3)
Saturday    Wednesday  Thursday   Friday     Wednesday
11/01/14 Â Â 15/01/14 Â Â 16/01/14 Â Â 17/01/14 Â Â Â 22/01/14
and so on....
I was trying to have multivalue options in a ssrs report, and I used this query Â
SELECT {[Measures].[Sales Amount],[Measures].[Tax Amount]} on columns,non empty([Product].[Color].[Color],[Product].[Product Name].[Product Name]) on rows
from
( selectÂ
(STRTOSET(@color))
 on columns
 from [Analysis Services Tutorial])
But the report only showed the default value as an option(in this format [Product].[Color].&[Multi] whic is not presentable),and what I also noticed in the parameter option is that, the available values option is set to none , also when I try to use get from query , it does not give me the vales for the parameters,and when I right click the designer pane it does not have the show hidden dataset option.I have created the parameter with multivalue option. what can I do to get the multivalue option to work.
My system environment: win2008 R2 SP1 64bit + SQL 2005 SP4 32bit
I amended the configuration file of rsreportserver.config with the below:
<Extension Name="CSV" Type="Microsoft.ReportingServices.Rendering.CsvRenderer.CsvReport,Microsoft.ReportingServices.CsvRendering" >
  <Configuration>
  <DeviceInfo>
   <Encoding>UTF-8</Encoding>
  </DeviceInfo>
  </Configuration>
  </Extension>
If I run the report and then click export by selecting the csv format, it looks ok with the encoding of UTF-8.
However, the same report , when I created a subscription and saved it in the hard driver. Its encoding became USC-2 Little Endian.
When the SSRS report exported to CSV file, all the column headers are added in the first row. The issue here is, I have hidden( thru Visibility property) some of the columns in the report but those columns are also displayed in the header row(first row)CSV file and the blank values for their corresponding data.for example, I have displayed only below 3 columns out of 6 columns in the report.col1, col2, col3but the CSV generated as below:
format..col1,col2,col3,col4,col5,col6a1,a2,a3,,,b1,b2,b3,,,c1,c2,c3,,,
I don't want the highlighted items.The TableColumn Visibility property has been setup as below..
=IIF(Fields!col4.IsMissing, TRUE, FALSE)
When the report is exported to other formats(like Excel,XML..)Â this works fine.. i.e., no hidden columns are displayed.