Hi,
I have created a cube with three dimensions and one fact. There is no problem While dragging the fields in the Browser window of the cube but the same fields dragging into the SSRS report i am getting the following message:
"The expression contains a function that cannot operate on a set with more than 4,294,967,296 tuples".
Can you please help me out.
Thanks
Dinesh
I installed SQL Server 2005 a while back and just tried to use the ReportServer recently and ran into a problem.
I tried accessing using http://babby/ReportServer (my report server and db server are both on 'babby') and got an ASP.NET runtime error (which wasn't displayed to me). So next I accessed locally at the server (babby) and got this error:
The current identity (NT AUTHORITYNETWORK SERVICE) does not have write access to 'C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files'.
I have done some searching on the Internet and there doesn't seem to be much info at all about SSRS 2005. I did found some MSDN info that suggested that NT AUTHORITYNETWORK SERVICE is the correct account to use when running SSRS under Win Server 2003 which I am.
'babby' is a Windows Server 2003 machine running IIS 6.0.
Any ideas?
As soon as a report is re-deployed a refresh of the report in the viewer shows the following error message:
An error has occurred during report processing. (rsProcessingAborted)
The data source 'xxx' cannot be found. (rsDataSourceNotFound)
This error occurs irrespective of electing to re-deploy or not re-deploy the datasource, and the only solution seems to be to close the report viewer down and restart it.
Under RS2000 any changes that were made to a report, would automatically be shown to the user if the report was refreshed, without having to close the browser/application down and restart it.
How do I get around this error?
Hi all,
what is tuple / tuples.
plz discuss in detail.
thanx
Sajjad
Below is an error that I run into often. Can someone tell me what is causing this and how to resolve it?
Executing the query ...
The expression contains a function that cannot operate on a set with more than 4,294,967,296 tuples.
Execution complete
Here is the MDX that caused the error:
With
Member [Measures].[Total Count] as
'[Measures].[Crash Count]'
Member [Measures].[Total Fatal] as
'[Measures].[Fatal Crashes]'
Member [Measures].[Total Injury] as
'[Measures].[Injury Crashes]'
Member [Measures].[Total A Injury] as
'[Measures].[A Injury Crashes]'
Member [Measures].[Total B Injury] as
'[Measures].[B Injury Crashes]'
Member [Measures].[Total C Injury] as
'[Measures].[C Injury Crashes]'
Member [Measures].[Total 0 Property Damage] as
'[Measures].[0 Property Damage Crashes]'
SELECT
NON EMPTY { [Measures].[Total Count],
[Measures].[Total Fatal],
[Measures].[Total Injury],
[Measures].[Total A Injury],
[Measures].[Total B Injury],
[Measures].[Total C Injury],
[Measures].[Total 0 Property Damage],
[Measures].[Vehicle Count],
[Measures].[Person Count],
[Measures].[Fatalities],
[Measures].[0 Injuries],
[Measures].[A Injuries],
[Measures].[B Injuries],
[Measures].[C Injuries],
[Measures].[Injuries] }
ON COLUMNS,
NON EMPTY {[Crash].[Case Nbr].[Case Nbr] *
[Date].[Calendar Date].[Date] *
[Crash].[Weather].[Weather] *
[Crash].[Road Defects].[Road Defects] *
[Crash].[Collision Type].[Collision Type] *
[Crash].[Light].[Light] }
DIMENSION PROPERTIES MEMBER_CAPTION ON ROWS FROM
(select strtoset('{[Crash].[County].&[Morgan] }')
on columns From
(SELECT STRTOMEMBER('[Crash].[TS Crash Mile Station].[5.28]') :
STRTOMEMBER('[Crash].[TS Crash Mile Station].[5.77]')
on columns From
(select {descendants([Crash].[Case Nbr].Currentmember)}
on Columns from
[SDM_Reports] ))) where ([Reportability].[Is Reportable].&[
Hi All,
We are using the SSRS 2005 for developing reports. In that I have some problems/doubts.
My problems are:
I developed / designed the report using the SSRS 2005. And I uploaded the reports in to the report server. I can able to view the reports in the preview section as well thro the browser.
Problem 1:
Reports are having the huge amount of data (For: report is having > 800 Pages). So, when ever I am trying to export in to EXCEL that time I am getting MemoryOutOfException. If I having the less number of pages that time I getting the result. How I can export the report into excel with out MemoryOutOfException.
Problem 2:
Some Excel sheets are having more data for ex: 75000. In EXCEL it self we are having the limitation we can not create more than 65536 rows per sheet. So If I want to export these 75000 records into excel how I do it.
Problem 3:
For delivering the reports I am using file share subscription method in SSRS. For example my reports are having the huge amount of data. That time I getting the following status in report server €œFailure writing file Weekly Install Base Report @timestamp: An error occurred during rendering of the report.€?"
Software Platform:
1. SQL Server Reporting Services 2005
2. SQL Server 2000 Data base
3. Microsoft Office 2003
Thanks
Sundaraguru S
Hi,
I am trying to schedule a report from Report Manager Interface (SSRS 2005) as below:
Scenario 1:
Start Date: GetDate() [today] e.g: 03/07/2008 (mm/dd/yyyy)
End Date: 31-dec-2009
Schedule: Monthly (Current Month) €“ Days: [any day in the Current Month which is < getdate()] e.g: March €“ 4th
Scenario 2:
Start Date: GetDate() [today] e.g: 03/07/2008 (mm/dd/yyyy)
End Date: 31-dec-2009
Schedule: Monthly (Less than Current Month) €“ Days: [any day] e.g: Feb €“ 12th
Scenario 3:
Start Date: GetDate() [today] e.g: 03/07/2008 (mm/dd/yyyy)
End Date: 31-dec-2009
Schedule: Monthly (Grater than Current Month) €“ Days: [any day] e.g: May €“ 10th
In all the above scenarios we observed a strange behavior of SSRS.
Scenario 1: Report is scheduled on 4th April 2008 where as it should be 4th March 2009.
Scenario 2: Report is scheduled on 12th Feb 2009 as expected.
Scenario 3: Report is scheduled on 10th May 2009 as expected.
Now, we changed the end date (31st Dec 2008) of scenario 1 as below:
Scenario 1:
Start Date: GetDate() [today] e.g: 03/07/2008 (mm/dd/yyyy)
End Date: 31-dec-2008
Schedule: Monthly (Current Month) €“ Days: [any day in the Current Month which is < getdate()] e.g: March €“ 4th
The next execution date is again 4th April 2008, which is wrong.
After scheduling the above reports we executed the below query in the ReportServer DB (SQL Prompt)
SELECT S.ScheduleId AS ScheduleId
, S.LastRunTime AS LastRunTime
, JA.Next_Scheduled_Run_Date AS NextRunTime
, RecurrenceType = CASE S.RecurrenceType
WHEN 1 THEN 'Once'
WHEN 2 THEN 'Hourly'
WHEN 3 THEN 'Daily'
WHEN 4 THEN 'Weekly'
WHEN 5 THEN 'Monthly'
WHEN 6 THEN 'Monthly'
END
FROM ReportServer.dbo.Schedule S WITH (NOLOCK)
Inner Join (
select j.name,max(ja.next_scheduled_run_date) as next_scheduled_run_date
from MSDB.dbo.SysJobActivity as ja WITH (NOLOCK)
inner join MSDB.dbo.SysJobs j WITH (NOLOCK) on ja.Job_ID = j.Job_ID
where ja.next_scheduled_run_date is not null and ja.next_scheduled_run_date >= Getdate()
group by j.name
) as JA on convert(nvarchar(256),S.ScheduleId) = convert(nvarchar(256),JA.name)
Where JA.name = (select top 1 name from msdb.dbo.sysJobs order by Date_Created desc )
-- Where JA.name in (select top 10 name from msdb.dbo.sysJobs order by Date_Created desc )
We have tried the same scenarios using the SSRS APIs. But unfortunately we received the same results.
Did anyone face this type of issue in past?
Is this a SSRS BUG or are we missing any point?
Hi,
I am successfully installed SSRS 2005 in my PC winxp sp2.
BUt while trying to configure database (Previous 5 steps are green) i get the following error.
The feature: "Using other editions of SQL Server for report data sources and/or the report server database" is not supported in this edition of Reporting Services
my database version
Microsoft SQL Server 2005 - 9.00.1399.06 (Intel X86) Oct 14 2005 00:33:37 Copyright (c) 1988-2005 Microsoft Corporation Express Edition on Windows NT 5.1 (Build 2600: Service Pack 2)
my reporting services version
ReportingServicesService!resourceutilities!9!9/26/2007-08:57:28:: i INFO: Reporting Services starting SKU: Standard
thank you in advance for any pointers.
regards
sahridhayan
When trying to open the reports server \servername
eports we are getting an error page titled "Server Error in '/Reports' Application." The server has been restarted, and as this is a new deployment, there has been very little access for individuals to make changes.
Any ideas on how to resolve the problem?
Thanks in advace
Hi,I have a table with 20.000.000 of tuples.I have been monitoring the performance of the insertion and updates,but not convince me at all.The table have 30 columns, what and 12 of it, are calcultated column.The test that i do was this:1 Insertion with all the columns and calculing the calcultated columnsin the insertion sentence.1 insertion and all the columns calculated in @vars..1 insertion with the basic fields, and 10 updates.And the result was that the last test was the most performant.What is your opinion?
View 4 Replies View RelatedI am getting an error: "Damage to the file was so extensive that repairs were
not possible. Excel attemted to recover your formulas and values, but
some data may have been lost or corrupted." in some instances when
exporting toexcel.
The report is no different than any othere report. This report uses rectagles and text boxes to control layout with two tables but it's pretty straight forward. This only happens for this particular report when exported only to Excel. I am using SQL2005 SP1.
Any ideas, thoughts, or references are welcome.
I wanted to understand the basic difference between the following two MDX queries which give two different outputs -Â
1. Set of Tuples -
Query-
SELECT
[Measures].[Internet Order Count] ON 0
FROM
[ADVENTURE WORKS]
WHERE
[code]....
2. Tuples in a Set -
Query-
SELECT
[Measures].[Internet Order Count] ON 0
FROM
[ADVENTURE WORKS]
[code]...
From the output i am getting on the MDX, i understand that the analogy is not correct. But I am not able to understand the difference between the same.
We are using RS2005 for a year now and never had any problems especially with mail subscriptions.
Since we transferred from single RS machine to web farm everything works ok except mail subscriptions. Subscription sometimes (?!?!?!?!) refuse to export report to a document of any kind. I repeat that this is a random thing which is more often with PDF and less with Web Archive or Excel. We are using shared schedules and on demand execution of AddEvent stored procedure by night batches to send mail to users. Also, original error from RS log says something that this kind of operation is not supported for server working in native mode. We don't have SharePoint so we never used it in any other way then native mode and it worked.
Any idea will be appreciated!
Thanks in advance.
Update 26.06.2007
It seems that problem is not loading dll used to export report to a file but loading email subscription extension (dll that needs to be loaded for execution of email subscription.)
Original error from RS Log:
w3wp!library!1!06/22/2007-11:06:43:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedNativeModeException: The operation is not supported on a report server that runs in native mode., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedNativeModeException: The operation is not supported on a report server that runs in native mode.
w3wp!extensionfactory!1!06/22/2007-11:06:43:: e ERROR: Exception caught instantiating Report Server DocumentLibrary report server extension: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.TypeInitializationException: The type initializer for 'Microsoft.ReportingServices.SharePoint.SharePointDeliveryExtension.DocumentLibraryProvider' threw an exception. ---> Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedNativeModeException: The operation is not supported on a report server that runs in native mode.
--- End of inner exception stack trace ---
--- End of inner exception stack trace ---
at System.RuntimeTypeHandle.CreateInstance(RuntimeType type, Boolean publicOnly, Boolean noCheck, Boolean& canBeCached, RuntimeMethodHandle& ctor, Boolean& bNeedSecurityCheck)
at System.RuntimeType.CreateInstanceSlow(Boolean publicOnly, Boolean fillCache)
at System.RuntimeType.CreateInstanceImpl(Boolean publicOnly, Boolean skipVisibilityChecks, Boolean fillCache)
at System.Activator.CreateInstance(Type type, Boolean nonPublic)
at System.RuntimeType.CreateInstanceImpl(BindingFlags bindingAttr, Binder binder, Object[] args, CultureInfo culture, Object[] activationAttributes)
at System.Activator.CreateInstance(Type type, BindingFlags bindingAttr, Binder binder, Object[] args, CultureInfo culture, Object[] activationAttributes)
at Microsoft.ReportingServices.Diagnostics.ExtensionClassFactory.CreateExtensionObject(Extension extConfig).
Hello Friends,
I have created few reports in SSRS 2005 on Windows 2003 Standard. Previouly I was not able to view reports from my .ASPX page which contained a ReportViewer, after going throuhg some other threads I was able to create a snap-shot for my reports . But still I'm not able to view reports, each time I try to view the page I get a message box with a error as : "Unable to locate control SSRS 2005: oReportCell" the same error is displayed when i try to access my reports from "http://localhost/reports.....".
But the funny thing is I'm able to view the reports when I use the following URL: "http://localhost/reportserver/pages/reportviewer.aspx?/<report>". I have applied all the Hotfixes & installed the latest Service packs. Any suggestions ???????
Hi,
Does anyone know of a link or list that has all the parameters for the "rs:" section of the URL access parameter, except for the ones in the Microsoft books?
Thanks,
Is it possible to write SSRS 2008 reports to run on an existing SSRS 2005 server?
If yes, what do I need to do to be able to write SSRS 2008 reports on my developer PC that will run on the SQL 2005 Server (which also has SSRS 2005 installed on it)?
I installed Visual Studio 2008 beta on the development PC and it appears that it needs SSRS installed on it too. So I installed SQL 2008 SSRS (SQL Server Reporting Services) and SQL 2008 Workstation Components onto the developer PC. Next I run the SQL 2008 "Reporting Services Configuration" tool. When I click on the "Web Service URL" section it hangs indefinitely and I have to force it closed.
The developer PC is Windows Vista Business.
Any suggestions on making this work, or any other information that you can think of that would allow me to use Visual Studio 2008 and the SQL 2008 "Report Designer Preview" tool to develop SSRS reports that will run on the SQL 2005 SSRS server?
Thanks!
-ErikR
Hi,
We are in need of migrating SSRS subscriptions along with the reports. Could you please let me know the process ?
I really appreciate your help on this.
Thanks,
Sam
Dear All,
I am basically new as far as SQl server 2005 concern.
I want to try out reporting services provided by sql server 2005.
That is make report using sql server 2005 and call that report from web or window application.
Please guide me in doing so or give me some useful link.
Thanks
I have managed to get the Forms Authentication sample to work bu there is a hitch. I am running Report Server and Report Manager on the same(test) PC. I can logon to the Report Server without a problem but when I try logon from the UILogon.aspx page for Report Manager I receive the following error:
An error occurred while attempting to get the ReportServer Url. The RPC server is unavailable. (Exception from HRESULT: 0x800706BA)
An error occurred while attempting to get the ReportServer Url. The RPC server is unavailable. (Exception from HRESULT: 0x800706BA)An error occured while attempting to get the ReportServer Url. The RPC server is unavailable.(Exception from HRESULT: 0x800706BA).
I can register users which suggests that the page can connect to the database.
Any help???
Hi everybody.
I'm looking to upgrade to SQL Server 2005 (Standard Edition). I'm interested in using SSIS, SSRS and SSAS. I hear that BIDS runs inside of Visual Studio 2005, and comes with the SQL 2005 software. I currently have VS 2003. My question is: Do I need to purchase anything besides SQL Server 2005 Standard, or do I need to buy anything separately, like VS 2005? (if so, which version would you recommend?)
Thank you very much!
- Trevor
I have installed SSRS and is trying to run it from the client machines. I am getting this error below. NOTE: If you run the SSRS Report Manager on the server it runs fine.
Reporting Services Error
An error has occurred during report processing. (rsProcessingAborted) Get Online Help
Cannot create a connection to data source 'Clearview'. (rsErrorOpeningConnection) Get Online Help
Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection.
I have setup a local administrative user on their web server called €˜cv_report€™ and setup the virtual directories to run under this account anonymously. I have also confirmed that cv_report the SQL user exists and is part of the correct roles. How do you relate the Windows €˜cv_report€™ account and the SQL €˜cv_report€™ account €¦ just via the name?
I even tried changing the Data source for the TEST config which was setup to use Windows NT Authentication and I switched it to use the cv_report account. It still didn€™t work.
I have a table Report as follows
Product Category Id
Catergory
Product Subcategory ID
Sub Category
1
Bikes
1
Mountain BikesPlease expand this column width so as to incorporate this sentence
1
Bikes
2
Road BikesPlease expand this column width so as to incorporate this sentence
1
Bikes
3
Touring BikesPlease expand this column width so as to incorporate this sentence
This is how it is visible when i preview the Expense Report. When i export this report to excel; it does not display me the complete details of Sub Category field. I have to drag the column 2 see the complete details...can anyone help me to solve this problem..it urgent
Is it possible to connect SSRS running on SQL Server 2005 enterprise edition (our production system) to a database running on SQL Server 2005 Developer's edition (our test system)
thanks!
hi ,
i am trying generate a report using following query. but the parameter is nt properly passing. (OLEDB). i need to correct it. pls help me.
="WITH "+
"MEMBER [Measures].[Amount] AS 'IIF(ISEMPTY([Measures].[Amount Usd]),0,[Measures].[Amount Usd])'"+
"SET [FilteredBUList] AS 'descendants((STRTOSET ( '{" & Join(Parameters!BU.Value,",") & "}', CONSTRAINED),[Account€”BillingCodeDsc].[Billing Code Description],leaves) ' "+
"SET [CustomTimeSet] AS Descendants([Date€”Fiscal].[2006].[Quarter 1]:"+
"[Date€”Fiscal].[2007].[Quarter 4],[Date€”Fiscal].[month],Leaves)"+
"SELECT "+
"{[Measures].[Amount]} ON COLUMNS,"+
"{ [FilteredBUList] "+
"}on rows"+
" FROM Profitability"
That BU parameter is multi value parameter. query should accept multi values .
How do I fax out reports from SQL Server Reporting Services (SSRS) 2005? I tried RightFax 6.0 but it didn't work.
Hi
Can any one tell me how to enable paging in ssrs 2005 reports, i am using "table" control for the report and when we print the report it gives every thing good, but when we desplay it the web it does not show page by page.
please help me...
thank you.............
Hi all,
I'm having trouble removing SSRS from a Win 2003 x64 Server. I have searched the forums here and tried different suggestions but to no avail. The problem: I go to Add/Remove Programs and choose to change SQL Server, I select the 3-4 options required to remove Reporting Services and when I get to the screen that has the sub-heading 'The selected components are being configured' nothing happens. I just get a Next button but no other feedback whatsoever and SSRS still resides on the server.
It might be worth mentioning that during the change installation wizard I get a warning that 64 bit SSRS cannot be run when ASP.NET is running in 32 bit mode. This is in fact the reason I am uninstalling SSRS, but I do not know if this has any bearing on being able to remove SSRS.
Any ideas as to what I can do to remove this?
Regards,
Stephen.
Hi,
I am using ReportViewer control for showing reports on my aspx page. I am able to show the report. But for the report both vertical and horizontal scrollbars are coming. when I viewed the report in Report Server website it is coming with out them and i can use the browser scrollbars to see the full report.
I came know the I have to set 2 properties (SizeToReportContent to True & AsynchRendering to False) of the reportviewer control to remove the scroll bars. But even after that the scroll bars are coming. The scroll bars are not coming only if i set ShowToolBar to False. But if i do that I can not see the "page navigation" and "export" etc. options.
Can somebody suggest any way to remove the horizontal and vertical scroll bars with out removing the toor bar of the ReportViewer control.
Thanks,
Srik
Hi,
I want to use two databases for my reporting services 2005. I want to connect to one database and check whether the logged in user is a portal admin using portalid and userid.If yes, then I will allow the user to user use all the stores. Stores are displayed in the drop down list as the multiselect parameter. If no, then I will connect to another database and check the user rights. Based on the user rights I will select only the stores that are applicable the user. i don't know how to use two databases in the reporting services. Please give me an idea to do this.
Thanks,
Muniappan Kandasamy
Hi,
I'm developing a web app in .NET 2.0 using SSRS 2000 and 2005. Some of the reports need to be exported directly to PDF when clicked, but the problem is in the fact that the user must select the parameters from the report manager window.
Is there any way to allow the direct export to PDF when generate is clicked, or to limit the options the user has to export to in the report manager.
P.S. If it is possible, I DO NOT want to accomplish this using code.
Thanks,
Hi,
Can you please solve my below problem.
I have a data in the report with one column having hyperlink. And below am showing Pie chart with respect to Whole data in the same report. But I want to view for particular value which has to reflect in Chart.
Very Very very Urgent...
Any help would be appreciated.
Thanks
Dinesh
Has anyone figured out why it takes about 30-60 seconds to load a report or even get the login webpage in SSRS2005?? This seems to happen in 2 situations. One, the server has just started up and its the first request for a report or the SSRS webpage. Two, no one has requested a report or a SSRS webpage for a while (say 30min, maybe less). Its like part of SSRS has gone to sleep. Is there anyway to keep this from happening??
View 4 Replies View RelatedIs it possible to have a custom FavIcon configured for a specific installation of SSRS 2005?
Regards, Dave