SSRS 2005 - Linked Report Email Doesn't Have Https
May 19, 2008
I've got a report server that I recently inherited. I'll be the first to admit that I'm not an expert on SSRS, but I've figured out a lot in the past few weeks.
One issue I'm having (apparently it's always been there, but nobody ever bothered to fix it in the past) has to do with the report subscriptions and linked reports. We have an SSL cert inside IIS. I have SSRS configured to "require SSL connections" in the Report Server Virtual Directory tab.
So the user gets an email with a link to a report. But the link has an "http://" as opposed to "https://." When you click on the link, it throws your standard "page must be viewed on a secure channel." When I manually append an S to the url, it works great.
There has to be a way to automagically add the S to the url, but I can't seem to figure out how. Anyone ever run into this before? Google has not been good to me this morning either.
View 1 Replies
ADVERTISEMENT
Nov 23, 2007
Hi,
I have a need to display on screen AND email a pdf report to email addresses specified at run time, executing the report with a parameter specified by the user. I have looked into data driven subscriptions, but it seems this is based on scheduling. Unfortunately for the majority of the project I will only have access to SQL 2005 Standard Edition (Production system is Enterprise), so I cannot investigate thoroughly.
So, is this possible using data driven subscriptions? Scenario is:
1. User enters parameter used for query, as well as email addresses.
2. Report is generated and displayed on screen.
3. Report is emailed to addresses specified by user.
Any tips on how to get this working?
Thanks
Mark Smith
View 3 Replies
View Related
Feb 8, 2015
Is there a way to subscribe SSRS report using dynamic parameters for email and trigger the report from autosys job so that report should generate the exact time the job is triggered.Let me describe, my SSRS report should be triggered on success of one autosys job. i need to send email parameter and time of report schedule from this autosys job.
View 3 Replies
View Related
Oct 6, 2015
How do I get data on my linked report based on my grouped subtotal and grand total from the main report. The subtotal and grand total are calculated columns.
I have a 3 columns in my matrix in the SSRS summary report. Actn_COAST, ActnCITY and NumbOfAccts.
The following is code for my summary report. The results are shown below.
SELECT Distinct ActnCITY, Count(ACCT) as NumbOfAccts,
CASE WHEN ActnCITY in ('NY', 'OH', IN, 'NJ', 'SC', 'NC') THEN 'EAST COAST'
WHEN ActnCITY IN ('CA'. 'NV', 'UT', 'WA', 'OR') THEN 'WEST COAST'
ELSE 'OTHER'
END AS Actn_COAST
FROM tbl1
where ACTNDATE between @STARTDT and @EndDT
Code for my detail report contains the following SQL
SELECT * FROM tbl1 where ACTNDATE between @STARTDT and @EndDT AND @ActnCITY = ActnCITY
I have linked my report based on the NumbOfAccts column. I am able to get data if I click any of the NumbOfAccts values related to the state I want. However when I am not sure how to make the subtotal and grand total work. I want when I click on the subtotal of either coast, I should be able to see records of that coast e.g., if I select 37 I should be able to see all the records in East Coast. If I click on the Grand Total, I only want data related to those 2 coasts.
View 2 Replies
View Related
May 4, 2007
Under IIS SMTP I can set bounced email redirect etc. how to do that with dbmail, the idea is I can get the list of bounced emails somewhere so I can create a report.
Any idea?
thanks
View 2 Replies
View Related
Aug 26, 2015
I want to create data driven subscription via Email for SSRS report.
To do so i can add my self either in To or CC.
I don't want multiple mails in my inbox as sent mails have excel as attachment, but I want notification for all the mails sent.
View 2 Replies
View Related
May 1, 2007
We currently have a few reports running on a external website. The users have to log in to the website using their Domain Username and Password. Our network admin wants to move from simply http, to a secure https protocol.
My question is: Are there any conciderations for making this move? ...Will it break my reports?
View 1 Replies
View Related
May 12, 2010
I have a parameter that chooses its available items from a query (with a label and a value column). I set the default for the parameter to the a particular value.
It works in Preview from design mode, but when I deploy it and run the report, it does not set the default.
View 5 Replies
View Related
Mar 24, 2006
Hi All -
Having a problem with email subscriptions in SSRS 2005 running on Win2003 server. The email subscription is attempting to email an excell attachment of the report. The report uses a shared data source with stored credentials. Configured email in Reporting Services config manager to use SMTP server OurServer.OurDomain.com Even wrote a test vb.net program to send email using that SMTP server and was successful - yet Reporting Services subscription fails with following error:
Failure sending mail: The report server has encountered a configuration error. See the report server log files for more information.
Combed the Reporting Services error logs but found nothing pertaing to email - SMTP - Subscriptions or anything close - I'm stuck but we really need this as I am emailing 3 reports daily by the manual process of running the reports - exporting to excell - and emailing - UHG!!
Any help appreciated - Thanks
View 8 Replies
View Related
Feb 13, 2006
Hi,
We have a new SSRS 2005 instance running with a number of reports. We have setup a subscription on one of these to run at 8am every Monday. However this is not working. No email is being sent and it does not appear the subscription is being run, nothing is ever written in the Last Run column.
I have looked in the logs and the only thing I can see is the following warning
w3wp!extensionfactory!5!13/02/2006-14:42:03:: w WARN: The extension Report Server Email does not have a LocalizedNameAttribute.
w3wp!extensionfactory!5!13/02/2006-14:42:03:: w WARN: The extension Report Server FileShare does not have a LocalizedNameAttribute.
We had this working succesfully with SSRS 2000. The new instance was a clean install.
Cheers
Dave
View 1 Replies
View Related
Nov 8, 2007
I have SSRS 2005 installed. User wants to change email address on subscription to send to external customer or others in our organization.
If I modify right "Manage individual subscriptions" to enabled for his security profile, the email address box is greyed-out.
I tried changing value <SendEmailToUserAlias>xxxx</ SendEmailToUserAlias> to FALSE in rsreportserver.config, with SSRS restart, but address box is greyed-out.
If I modify right "Manage all subscriptions" enabled for his security profile, the address box is not greyed-out, but can now see-edit everyone's subscriptions for that report.
How can I turn on address box is not greyed-out, but not open view of ALL subscriptions to my users?
View 5 Replies
View Related
May 19, 2015
How to enable http for SSRS service in my current sharepoint 2013 environment with https.
this is needed as we have a limitation in SSAS: We cannot specify HTTPS in the Analysis Services Report Action.
View 3 Replies
View Related
Jun 25, 2015
I am facing an Issue with my SSRS-Reports. I have a stacked column chart in my report and the columns are linked to another report, a sub-report with 6 parameters. Right now after clicking the columns, the sub-report get opened in the same IE-Tab, with relevant parameters and it works out correctly. Challenge is, to open the new report in a new tab / window.
My Current situation: A Chart report, with Action “go to report” on series properties with 6 parametersChallenge: open linked sub-report in a new tab.Info 1: new path of sub-report looks like this:
http://<my_report_server>?ItemPath=<subreportName>&ExecId=qwercc45xgfvll45e4ebgjna&PingId=314x1cy4etmnky45abszeb99
Already tried with no success: I know, action “go to URL” using Expression:
="javascript:void(window.open('http://……','_blank'))"
Info 2: the parameters are like these: CompanyName; Date_From; Date_To; Title; Division; ProfitCenter.
I don’t know If I should try to create this ExecId and PingId; If there is any way to pass the through the parameters or there is another way.
View 3 Replies
View Related
Jul 3, 2015
I have created a word cloud in SSRS 2008 using Jason Thomas's method but I would like to be able to add an action to click on a word to go to a another report using either the word or an ID integer. how to add an action to go to another report?
View 5 Replies
View Related
Aug 8, 2006
I have subscription by email problem on the following configuration:
Windows XP prof.
SQL Server 2005 Enterprise
Configured Database Mail with remote SMTP server to send email successfully
Configured SSRS to use remote SMTP server
Edited the Rsreportserver.config file as following (by the instructions from MSDN)
<Configuration>
<RSEmailDPConfiguration>
<SMTPServer>smtp.broadband.rogers.com</SMTPServer>
<SMTPServerPort>25</SMTPServerPort>
<SMTPAccountName></SMTPAccountName>
<SMTPConnectionTimeout></SMTPConnectionTimeout>
<SMTPServerPickupDirectory></SMTPServerPickupDirectory>
<SMTPUseSSL></SMTPUseSSL>
<SendUsing>2</SendUsing>
<SMTPAuthenticate>0</SMTPAuthenticate>
<From>My email Address</From>
<EmbeddedRenderFormats>
<RenderingExtension>MHTML</RenderingExtension>
</EmbeddedRenderFormats>
<PrivilegedUserRenderFormats></PrivilegedUserRenderFormats>
<ExcludedRenderFormats>
<RenderingExtension>HTMLOWC</RenderingExtension>
<RenderingExtension>NULL</RenderingExtension>
<RenderingExtension>RGDI</RenderingExtension>
</ExcludedRenderFormats>
<SendEmailToUserAlias>True</SendEmailToUserAlias>
<DefaultHostName></DefaultHostName>
<PermittedHosts></PermittedHosts>
</RSEmailDPConfiguration>
</Configuration>
I scheduled my subscription and tested it. I didn't receive any mail from the setting email address, but got an error message in ReportServerService log file as following.
Error sending mail, CDO error -2147220978, will not resend
Error sending email. System.Runtime.InteropServices.COMException (0x8004020E): The server rejected the sender address. The server response was: 530 authentication required - for help go to http://help.yahoo.com/help/us/mail/pop/pop-11.html
I did a little search, but couldn't find any solution for it. Is anybody successfully to get the Reporting Services subscription by email function working through MS SQL Server Management Studio or if you have a solution for this issue, would you mind to share the experience with me. I will be very appreciated.
View 5 Replies
View Related
Apr 22, 2015
I'll go to a dataset, open up the query designer, add a new parameter, then refresh the fields, but the parameter won't be added as a report parameter. If I go to the dataset properties under the list of parameters, the value in the dropdown will be blank. However, sometimes this will automatically add.
Is this a bug in Visual Studio? How do I get around this?
View 3 Replies
View Related
Jul 28, 2015
get the data from report to create data driven SSRS Subscriptions,
write query :
Running Report:
View 5 Replies
View Related
Aug 10, 2006
Hi,
I have setup reportserver with default settings (non https) and afterwards in IIS added a certificate and https support.
Know I am able to work really well and secure over the internet, but some links in report manager pointing to http://server.domain.com/reports instead of https:
For example if i call a report and then in the top there are (view, properties,...)
- View is HTTPS
- Properties is HTTPS
- History is HTTP
- Subscription is HTTP
I have read some articles - mentions I should configure https, but
- in Report Configuration you could not setup HTTPS
- in rsreportserver.config i have entered the https link version but did not change anything
- in RSWebApplication.config the Reportserverurltag is blank - so i did not change anything
Thanks for any help
HANNES
View 6 Replies
View Related
Nov 18, 2007
Here is a situation in my company:
We have an Office SharePoint 2007 site, we developed a couple of web parts and added them to our site. We used SQL Server Reporting services 2005 as our reporting solution. The reports are hosted on the report center and when we need a report, we open it by sending a URL requesting the report, passing the report parameters in the URL query string. So the report is filtered based on the parameters passed from the web parts.
But since best practices say that you should host reports directly under SharePoint, by configuring the reporting services to run in the SharePoint integrated mode. We followed the steps and installed SharePointRS and we finally succeeded to publish the reports to a SharePoint folder, but we had a limitation: we are unable to pass the report parameters internally to the report hosted in SharePoint. If we passed them in the query string as the report center case, SharePoint neglects them totally.
So the question is: how can I pass parameters internally between a SharePoint web part and a SQL server 2005 reporting services report hosted in SharePoint?
View 1 Replies
View Related
Nov 7, 2007
While exporting a SSRS 2005 report in CSV format ,can we include the report headers and footers also to be exported .
Thanks .
View 1 Replies
View Related
Jun 4, 2007
I have RS 2005 SP1. I have a report model developed and deployed.
I have a scenario and I am not sure if it is possible to create a report for this scenario using the report builder. Let's say I have a customers entity and address entity that is related to the customer's entity as a 1-many relationship. I have the effective date on the address that specifies the date from which the address is effective. A customer will have multiple records in address with the latest effective date as the latest address of the customer.
Suppose, I need to create a report using the report builder to get the list of latest address for customers, how can I do it? I know it can be done using the report designer using a query that uses the group by clause. But can it be done using report builder?
Thanks in advance.
View 4 Replies
View Related
Jul 6, 2015
I have a report that gets sends out through a subscription and sometimes the report has multiple pages and all those pages appear within one email.Is it possible to set the subscription in such a way that an email is sent per page when the subscription executes.
View 2 Replies
View Related
Sep 18, 2006
Hi there
I have two machines one 64bit machine with SQl 2005 on it and another 32 bit machine which I use as my web server both running win2003. I have followed the knowledgebase article from Microsoft (http://www.microsoft.com/technet/prodtechnol/sql/2005/httpasws.mspx) and also researched postings on this site but can't seem to access the cubes remotely. I have changed to msmdpump.ini file to have the <ServerName>mycomputername</ServerName> which points to the SQL box.
I can connect to the cubes from the 32 bit machine using somethign like crystal reports and connecting directly to the server name but can't connect to https://localhost/olap/msmdpump.dll I get an error about could not connect to the computer name or the computer is not runing analysis services.
Any ideas?
Cheers,
Derek
View 3 Replies
View Related
Apr 17, 2007
Dear All,
I am basically new as far as SQl server 2005 concern.
I want to try out reporting services provided by sql server 2005.
That is make report using sql server 2005 and call that report from web or window application.
Please guide me in doing so or give me some useful link.
Thanks
View 1 Replies
View Related
Nov 22, 2006
Hi!
I'm new using MSSql 2005 Express. How can i access my DB using http/https for reporting and DB changes/administration?
Regards,
JP
View 1 Replies
View Related
May 23, 2008
Hello, I've been trying the suggestions in the link below, and without success.
http://blogs.msdn.com/bwelcker/archive/2005/09/28/474898.aspx
This is supposed to allow us to build a linked report with these properties already set. This post works for a linked report that is already deployed. I want to set the properties on the report as I'm deploying the linked report. The instructions listed don't seem to work, it gives type errors and other related things when I try this approach, has anyone else had any luck doing this?
It says:
Error : rsElementTypeMismatch (The value provided for the PageHeight
field is not valid for its type. It cannot be converted from a string value to
the type that is required.)
What do I do to get around this? I tried changing it to a number, but no luck. I'm trying to do this in rs.exe:
Dim props(7) As [Property]
props(0) = New [Property]
props(0).Name = "Description"
props(1) = New [Property]
props(1).Name = "Hidden"
props(2) = New [Property]
props(2).Name = "PageHeight"
props(3) = New [Property]
props(3).Name = "PageWidth"
props(4) = New [Property]
props(4).Name = "BottomMargin"
props(5) = New [Property]
props(5).Name = "TopMargin"
props(6) = New [Property]
props(6).Name = "LeftMargin"
props(7) = New [Property]
props(7).Name = "RightMargin"
props = RS.GetProperties(basereportpath, props)
RS.CreateLinkedReport(name, parent, basereportpath, props)
View 1 Replies
View Related
Jan 18, 2008
We have been, successfully, using SSRS 2005 with SQL databases. Now are trying to do create SSRS 2005 reports using an Oracle database. What components do I need to install on our SSRS 2005 server to successfully render a report, in a web browser, using an Oracle 9i database. Any help would be appreciated.
View 15 Replies
View Related
Nov 19, 2007
We are currently designing a report which we hope is possible. Each month the clients employees upload receipts as PDF's to the network and then fills out their form as needed.
We are planning to upload the PDF's to a Microsoft Office 2007 sharepoint site which we would like to then pull out and use as being part of the report.
So page one will be a list of expenses pulled from a database table and the remaining pages will then be the PDF's showing as part of the report. I have seen the Jump to URL option but that presents a hyperlink option only. I need to see the actual pdf in the report.
Has anyone done anything similar where they have extract a PDF to show in a SSRS 2005 report
Many thanks
View 1 Replies
View Related
Feb 8, 2006
I don't know how best to explain this but will try.
In my SSRS 2005 report, i have one group in my table. In that group, I have a field that for each company record in my dataset, this field value is repeated for each record. This is a transactions table so you'd expect several records in the dataset for each company..that's not the problem.
example data from dataset:
TransID CompanyID FeeGoal
1 1000 100
2 1000 100
3 1000 100
4 2000 400
5 2000 400
My SSRS 2005 Report has:
Group1 fields:
CompanyID FeeGoal
=Fields!CustomerNumber.Value =Fields!FeeGoal.Value
The output when previewed looks like this:
Company FeeGoal
1000 100
2000 400
Footer 209409730.83 (totals up all feegoals! not just unique instances!)
I have a footer, and this is where the problem comes in. I am not able to sum 100 + 400 because if I do a SUM(=Fields!FeeGoal.Value) It doesn't just sume up 100 + 400 but rather (100 + 100 + 100) + (400 + 400)
I can't find a way to sum up basically the top values for FeeGoal which is really what the Group Field is doing since I get 100 and 400 in my group field for feeGoal. I should end up with a total of 500 for my footer total for Fee Goal but not sure how to get this to work in this unique situation.
FYI: FeeGoal is an input from an ASP.NET form to allow managers to update that one column in my report so that other calculations can rely on it in my group fields. Once the user finishes, I run a stored proc to insert that fee goal in every customer transaction record / feegoal field
I guess is there a way to do some sort of Distinct SUM in an expression? I also tried:
=SUM((Max(Fields!FeeGoal_AZ.Value)) / Fields!FeeSchedule.Value) * 100)
but you can't have an aggregate function like this, I get this error:
[rsAggregateofAggregate] The Value expression for the textbox 'GrossGoal_gt' contains an aggregate function (or RunningValue or RowNumber functions) in the argument to another aggregate function (or RunningValue). Aggregate functions cannot be nested inside other aggregate functions.
Build complete -- 1 errors, 0 warnings
View 27 Replies
View Related
Dec 21, 2006
Where can a person go to report SSRS 2005 bugs? I didn't see any area for error reporting.
These are the few bugs I've recorded, but I've seen so much more :(
On 2005sp1, and mainly using ssas 2005 for source data:
When you have an existing report parameter that was created by the graphical query designer area for dataset1, and then you go to make another dataset and add the same hierarchy and choose for it to be a parameter, it will overwrite what parameter settings you just had (ie, not multivalue and a special default value I desired).
When adding subsequent series or category fields to a chart, the default series/category grouping name remains the same and causes a error when attempting to run the report. IE: chart2_CategoryGroup1, chart2_CategoryGroup1, chart2_CategoryGroup1 - all names are the same for all of the 3 groupings that I've added.
View 3 Replies
View Related
Feb 25, 2013
When I run a report for a purchase order, the report duplicates records for product codes.For example the purchase order is: P000976, the report display the product code twice when it should only appear once. 45-5540 appears twice.
P000976 09-17-2012 15,040.00 15,040.00 0.00
45-5540 "Lordotic Cervical Spacer 10mm
Lordotic Cervical Spacer 10mm" 20 20 0
45-5540 "Lordotic Cervical Spacer 10mm
Lordotic Cervical Spacer 10mm" 20 20 0
When I put the report's SQL in SQL server and run the sql by seeing where the code cause the additional product code it is this line within the SQL:
join all_product_codes_VW p on q.distpartno = p.distpartno
select q.specialrequirement
, q.distpartno
, q.toproduce
, q.prodbegindate
, q.distributor
[code]....
View 1 Replies
View Related
Jan 9, 2008
Hello,
I have a report that is made out of many subreports.
It takes a long time to produce this report.
Is there a away of knowing and displaying to the user which sub report is produced now?
Is there a way of making status info sent to the UI? Somthing like OnStartPage/OnStartReport (now send status to UI somehow)?
TIA
I S
View 5 Replies
View Related
Apr 1, 2008
I know this is the code to add a single valued report parameter to a report via asp.net
Dim paramList As New Generic.List(Of ReportParameter)
paramList.Add(New ReportParameter("MyParameter", "MyValue", False))
Me.ReportViewer1.ServerReport.SetParameters(paramList)
But how do I go about adding a multi valued parameter?
View 8 Replies
View Related
