Hi,
I created one fact and four dimensions in SSAS2005. I am accessing these in SSRS 2005.
But my problem is to develop one report with this fact i have to keep a criteria like this in SSRS 2005. how to compare a column in one dimession with another column in another dimension
For Ex:
CONVERT(VARCHAR,dt1.date,102)>= CONVERT(VARCHAR,dt2.Date,102)
Where should i keep this condition in SSRS 2005.
Can you help me
Thanks
Dinesh
I have an SSRS Report that I created. I'd like to set up a job that will run every hour, and what the job will do is send an SSRS report to a select group of recipients when a certain criteria is met. How do I go about doing this? My SSRS knowledge is very limited.
Additional Info:I created the report with a one time schedule to a certain email address. I do see the report schedule in the reportserver DB. Because I already have the schedule and the subscription id, I think all I have to do is call that subscription, but that's where I'm lost.
I am creating a report where there are 3 tables in one report which have visibility set as an expression so that when a certain criteria is selected in the "Report" parameter, a different table is shown below. This works as expected.
When table 3 is shown, I want a new parameter to be visible to the user called "Ward" where the user will select the ward they are interested in and the table will display data below just for the ward selected. However, I don't want the ward parameter visible when either of the other 2 options are selected. Is this possible and how to do this?
Hi,
I have a question about passing user information into a report. Right now I have a travel report that accepts trip ID as a parameter. I have multiple users who will access this report through active directory and I think using tripID is too constricting for them. Ideally, I want them to pick their name from a list and pick the travel date(s) that they want to print out.
How can I make the report read in their username from Active Directory and pass this along to the report so that it'll automatically apply a filter the report. Then from a pull-down list, pick the travel date(s) that they're interested. Is this even possible?
Thanks,
Curtis111
Hi,
I would like to get some advises on how creating some kind of reports with Report builder
Lets say i have these two tables with these columns
Table Product
ProductName
Table ProductInstance
Product ID
CreationDate
CompletedDate
I would like to be able to create with report builder a report that looks this
Start Date : 2008/10/01 - End Date : 2008/10/30
Total Total Total
In Out OutStanding
ProductName1 10 0 3
ProductName2 5 5 2
ProductName3 8 8 5
ProductName4 12 5 6
Total In : total number of product created between StartDate and EndDate
Total Out : Total number of product completed between Start Date and End Date
Total OutStanding : Total number of product that have not yet been completed.
Any suggestion and advise on how to achieve this ?
I would like to print the selection criteria on a separate page or report. I explored various forums and help facilities without luck. Any suggestions please?
I have a report with a date type parameter. Depending on the value return by this date type parameter the dataset will return either the credit, deposit or process date. How do I go about coding it so that it will dynamically select the right column in my query for my dataset?
Sincerely appreciate all the help I can get.
Thanks in advance.
For example, consider the following queries:
DECLARE @SomeParam INT
SET @SomeParam = 44
SELECT *
FROM TableA A
JOIN TableB B ON A.PrimaryKeyID = B.ForeignKeyID
WHERE B.SomeParamColumn = @SomeParam
SELECT *
FROM TableA A
JOIN TableB B ON A.PrimaryKeyID = B.ForeignKeyID AND B.SomeParamColumn = @SomeParam
Both of these queries return the same result set, but the first query filters the results in the WHERE clause whereas the the second query filters the results in the JOIN criteria. Once upon a time a DBA told me that I should always use the syntax of the first query (WHERE clause). Is there any truth to this, and if so, why?
Thanks.
I have done the following and a domain user would not access report created a login to the SQL server to the user (this SQL Server is where data source DB is)went to site setting in Report Manager and made this use a system userright clicked on report folder and made this user in the browser roleeven checked that in the report in question, the user is already in the browser role Still the user would not access the report! "User .......... does not have required permission" is the error message I am getting.
View 6 Replies View RelatedI have written a report visual studio. The report has 10 multi-value parameters that pull data from their individual data sets within the reports. When running the report from within Visual Studio it renders fine. There are no errors reported, only a warning related to a pathname I have use to retrieve image data and display on the report.Deployment of the report is error free.When I view the report I briefly get the "Loading" splash window, but then nothing. None of the headers or static text is displayed. The results window is blank.
The report defaults all the parameter values. In trying to debug the issue I have found by reducing the number of parameter values the report will render. Once I have all the values added, the report does nothing.Below is the query being used for the report. The where clause in the query shows the parameters being used and the syntax.We are running on Windows Server 2008 R2 and SQL Server 2008 R2.
Ralph
SELECT RTRIM(a.ITEMNMBR) AS Style, RTRIM(a.ITEMDESC) AS Description, a.ITMSHNAM AS UPC, c.LOCNCODE AS Store, d.LISTPRCE AS ListPrice, a.CURRCOST AS Cost,
a.USCATVLS_1 AS [Main Category], a.USCATVLS_2 AS Market, a.USCATVLS_3 AS [Alternate Retail], a.USCATVLS_4 AS Country, b.ITEMXTRAS_1_Type AS Type,
b.ITEMXTRAS_2_Finish AS Finish, b.ITEMXTRAS_3_SubCategory AS SubCategory, b.ITEMXTRAS_4_Department AS Department,
[code]...
I have a ssrs report having 2 tables in with 4 columns in each. When I go to export option in preview I can see all data coming in one excel sheet, But I am trying to get 2 tables in 2 different pages in Excel when I export.First page of excel comes with first table data with 4 columns and second page of excel comes with second table data with 4 columns .
View 2 Replies View RelatedHere is a situation in my company:
We have an Office SharePoint 2007 site, we developed a couple of web parts and added them to our site. We used SQL Server Reporting services 2005 as our reporting solution. The reports are hosted on the report center and when we need a report, we open it by sending a URL requesting the report, passing the report parameters in the URL query string. So the report is filtered based on the parameters passed from the web parts.
But since best practices say that you should host reports directly under SharePoint, by configuring the reporting services to run in the SharePoint integrated mode. We followed the steps and installed SharePointRS and we finally succeeded to publish the reports to a SharePoint folder, but we had a limitation: we are unable to pass the report parameters internally to the report hosted in SharePoint. If we passed them in the query string as the report center case, SharePoint neglects them totally.
So the question is: how can I pass parameters internally between a SharePoint web part and a SQL server 2005 reporting services report hosted in SharePoint?
I'm wondering how to print a SSRS report without bringing up a report viewer. Is there way to print(PDF format) the SSRS report in the web application( .net ) directly from the "print" button without bringing up a report viewer?
View 2 Replies View RelatedHi,
I'm encounter lately some weird behaviour of SSRS in BIDS as well as after deploying on Reporting Server.
I'm running basic classical SQL SSRS Reports with Oracle DB connection. My reports have header and footer pagination and well defined report layer configuration. All the reports are simple based on one table and some basic parameters passed to query.
In query builder from BIDS from data tab, the query is running fine without any other execution delays. Also the query is runnign fine in PL/Dev environment.
When I switch in "Preview" mode the report hangs in execution and just showing "Report is being generated" without any resuts. After a while is generating an execution error (after 20 min).
The behaviour is the same after deployment on Report Server .
I now...here it comes...the problem is intermitent...some times the report is working...but most of the times it hangs on execution.
I checked the report from top to bottom and nothing's wrong from design perspective.
On other reports I don't have this problem and I don't understand where to start to investigate.
Any suggestions...I'm stuck here.
Thanks
I am trying to develop a report from cube,and it has one drill through report.when i click on sales amount field on main report,then it open the drill through report with details.Here i passed the **(category,subcat,product)parameters(Cascaded)** to drill through report in action part of main report.In my main report i have two columns .
columns are **Level** and **Salesamount**.
Values are like
**[-]category** **100**
**[-]subcat** **50**
**product** **30**
when i click on 100, parameters are passed & it open the detail report correctly, but when i click on 50,the values for subcat parameter is not getting values in detail report and same as the product also.
Here i used the expressions in parameter values
**pCategory**----iif(inscope(category),!fields.category.value,split(join(Parameters!category.value,","),","))
**psubcat**----iif(inscope(subcat),!fields.subcat.value,split(join(Parameters!subcat.value,","),","))
**pproduct**----iif(inscope(product),!fields.product.value,split(join(Parameters!product.value,","),","))
How do I get data on my linked report based on my grouped subtotal and grand total from the main report. The subtotal and grand total are calculated columns.
I have a 3 columns in my matrix in the SSRS summary report. Actn_COAST, ActnCITY and NumbOfAccts.
The following is code for my summary report. The results are shown below.
SELECT Distinct ActnCITY, Count(ACCT) as NumbOfAccts,
CASE WHEN ActnCITY in ('NY', 'OH', IN, 'NJ', 'SC', 'NC') THEN 'EAST COAST'
WHEN ActnCITY IN ('CA'. 'NV', 'UT', 'WA', 'OR') THEN 'WEST COAST'
ELSE 'OTHER'
END AS Actn_COAST
FROM tbl1
where ACTNDATE between @STARTDT and @EndDT
Code for my detail report contains the following SQL
SELECT * FROM tbl1 where ACTNDATE between @STARTDT and @EndDT AND @ActnCITY = ActnCITY
I have linked my report based on the NumbOfAccts column. I am able to get data if I click any of the NumbOfAccts values related to the state I want. However when I am not sure how to make the subtotal and grand total work. I want when I click on the subtotal of either coast, I should be able to see records of that coast e.g., if I select 37 I should be able to see all the records in East Coast. If I click on the Grand Total, I only want data related to those 2 coasts.
Is there a way to subscribe SSRS report using dynamic parameters for email and trigger the report from autosys job so that report should generate the exact time the job is triggered.Let me describe, my SSRS report should be triggered on success of one autosys job. i need to send email parameter and time of report schedule from this autosys job.
View 3 Replies View Related
While exporting a SSRS 2005 report in CSV format ,can we include the report headers and footers also to be exported .
Thanks .
Hi,
I'm having problems navigating from one report to another one if the second report has a multi-valued report parameter. When I navigate to the second report, I don't pass any parameters, but I get an error "parameter is missing a value" for the multi-valued report parameter. I have it setup as allow "multi-value" and "blank value". Any idea what the issue might be?
Thanks.
How to display the logo in middle of report header , The logo is embedded in the Image folder . The column of the report are static. we are using SSRS 2008
View 6 Replies View Relatedhai iam new to ssrs, please help me.
i have student billbale information assume what ever data it. i need to to dispaly total amount for the student at
Bottom Of Report By Daily, Weekly, Monthly, SYTD . take any example, i want to know formula.
thanks to advanced
Jacks v
I have a report which works fine with visual studio but when i uploaded the same into report server and tries to access it through IE or chrome or anything its dam slow.
how to get rid of this issue?
I need to create a SSRS report using the Warehouse tfs_warehouse DB Report need to be drill down on WorkItemType Parents and child values. So, If we click on Product Back Log Item will get all the tasks inside it and so on....
------->Product BackLog items
----------> Bugs Or Tasks
-----------> Tasks
I have done research and found out how to do it in OLAP cube ..but still can't figure out the TSQL query to be used.Found one of the query on forum:
SELECT * FROM DimWorkItem DWI
INNER JOIN FactWorkItemLinkHistory FWILH ON DWI.System_Id = FWILH.TargetWorkItemID
WHERE FWILH.WorkItemLinkTypeSK IN (SELECT DWILT.WorkItemLinkTypeSK FROM DimWorkItemLinkType DWILT WHERE DWILT.LinkName = N'Child')
AND DWI.System_WorkItemType = N'Task'
AND DWI.System_Rev = (SELECT MAX(DWI1.System_Rev) FROM DimWorkItem DWI1 WHERE DWI1.System_Id = DWI.System_Id)
AND FWILH.SourceWorkItemID IN (SELECT DWI2.System_Id FROM DimWorkItem DWI2 WHERE DWI2.System_WorkItemType = N'Bug');
Hi,
It appears to work fine on my end however on my clients end, whenever they try to print a report that displays perfectly within the report viewer to their printer by selecting the printer button in the report it never ends up printing.., however if they go into printer setup and change the page range to print from all pages to just maybe one page and then select the print button it seems to print fine..
The printer seems to receive the information as the light flashes but no page kick out when all pages is selected to print..
Any help would be greatly appreciated..
Does anyone know if the visibility of anything (group, column etc) in a sub-report can be toggled by an item in the master report?
Thanks
Richard
Hello,
I'm using Reporting Services to render a text (stored in sql as varchar(max)). The text is all plain text, with some lines having trailing spaces.
Source text file i've imported to SQL via SSIS:
CLIENT: 10055
STATEMENT 2007
DATE:1002993
THIS IS THE OTHER STATEMENT
COLUMN1 COLUMN2 COLUMN 3
TRY THIS
*Note the trailing spaces on the line before 'STATEMENT 2007'.
I've designed a report using the Report Project in VS2005 to retrieve this text via a stored procedure. When I test the report using the 'Preview' tab in the IDE, it looks good
CLIENT: 10055
STATEMENT 2007
DATE:1002993
THIS IS THE OTHER STATEMENT
COLUMN1 COLUMN2 COLUMN 3
TRY THIS
But when I deploy the report and run it using URL Access:
CLIENT: 10055
STATEMENT 2007
DATE:1002993
THIS IS THE OTHER STATEMENT
COLUMN1 COLUMN2 COLUMN 3
TRY THIS
On all lines with trailing spaces, they (the trailing spaces) have been removed. This is affecting my formatting of some reports and statements. We really want to use the report viewer as it has built in paging, print and export capabilities.
Why does it look okay in VS2005 but different in Report Viewer via URL Access and Report Manager?
Note: When I export as PDF, it looks okay.
The stored procedure I use to return the data is a CLR Hosted assembly as below:
Code Snippet
Partial Public Class StoredProcedures
<Microsoft.SqlServer.Server.SqlProcedure()> _
Public Shared Sub GetPagedDocument(ByVal inText As SqlString)
Dim dr As SqlDataReader
Dim row As New SqlDataRecord(New SqlMetaData("RowText", SqlDbType.Text))
Dim cmd As New SqlCommand("select cast(doc as varchar(max)) as 'DOCTEXT' from testdoc WHERE id='" + inText + "'")
Dim cn As New SqlConnection("context connection=true")
cn.Open()
cmd.Connection = cn
SqlContext.Pipe.SendResultsStart(row) 'initialise the resultset to be returned
dr = cmd.ExecuteReader
'If no records in result set, return.
If Not dr.HasRows Then
row.SetString(0, "There is no document to display or you do not have permission to view the document.")
SqlContext.Pipe.SendResultsRow(row)
SqlContext.Pipe.SendResultsEnd()
' SqlContext.Pipe.Send("There is no document to display.")
Return
End If
'Read rows in the result set
dr.Read()
'Get the entire text
Dim docText As String = dr.Item("DOCTEXT")
'debug
row.SetString(0, docText)
SqlContext.Pipe.SendResultsRow(row)
SqlContext.Pipe.SendResultsEnd()
Return
'end debug
End Sub
End Class
Any help will be appreciated.
i just clicked on Advanced mode in Column Group, and then in Row Group Side i set Fixed Data=true for first top static. I'm using local report not server report and i'm displaying that local report in Reportviewer. Now also its not working....
View 6 Replies View RelatedI have a report parameter textbox in my SSRS report which has the parameter properties as "allow null value" and "allow blank value" checked.
How I can ensure that when the value is entered in textbox, it should accept any character ie. The SQL code I should write so that all the characters inputted via the report parameter are accepted.
Do I need the report server running in order view a SSRS report in a report viewer control? I've created my report in .net and it works great when I'm viewing it in visual studio, but can I run it my web app without the report server.
View 1 Replies View RelatedHello Friends,
I am using an action report(SSRS Report) in a Proclarity report in which the user generate action report on some particular filters. The problem is : In this report (SSRS report) I am using two row groups and three data fields and intially i am displaying the report in collapsed manner. The report is working fine in BIDS and as well as on the report server. But when i am generating the report through prolarity , the report is getting generate but when i tried to expand the collapsed field its throwing an error
"An internal error occured on the report server. See the error log for more details. Specified argument was out of the range of valid values"
Can anyone help me out to solve this issue.
Thanks & Regard's
I have RS 2005 SP1. I have a report model developed and deployed.
I have a scenario and I am not sure if it is possible to create a report for this scenario using the report builder. Let's say I have a customers entity and address entity that is related to the customer's entity as a 1-many relationship. I have the effective date on the address that specifies the date from which the address is effective. A customer will have multiple records in address with the latest effective date as the latest address of the customer.
Suppose, I need to create a report using the report builder to get the list of latest address for customers, how can I do it? I know it can be done using the report designer using a query that uses the group by clause. But can it be done using report builder?
Thanks in advance.
Hello All,
I am working on an SSRS (SQL server 2005 BI Studio) report that has some tables joined by inner joins. Some of the fields in the report are grouped where as some of them are detailed. For eg. customer name, vendor name, sales order are all grouped and fields like qty, sales price , cost price are detailed. The calculations are all fine.
Now, the problem is that when I get the report to display the qty, sales price and the rest of the detailed fields, they are all repeated thrice which is not the case.In the sales order they are just one line item but my report repeats it three times i.e. three line items. So, if I sum those fileds they are added up thrice. I would really appreciate if some one could let me know what could be the probable area of problem. Could there be any problem with the inner joins?
Thanks,
Rashi
hi All
I think this should be easy but I have been going around in circles
the following is my code:
SELECT Ticket.TicketNumber, Ticket.CreatedDate, SystemUser.Alias, SystemUser.FullName, Ticket.AssignedAnalyst, Ticket.CreatedBy, Ticket.LastModifiedBy,
Location.LocationName
FROM Ticket RIGHT OUTER JOIN
SystemUser LEFT OUTER JOIN
Location ON SystemUser.LocationID = Location.LocationID ON Ticket.AssignedAnalyst = SystemUser.Alias OR Ticket.CreatedBy = SystemUser.Alias OR
Ticket.LastModifiedBy = SystemUser.Alias
WHERE (Ticket.CreatedDate >= CONVERT(datetime, @FromDate))
GROUP BY Ticket.TicketNumber, Ticket.CreatedDate, SystemUser.Alias, SystemUser.FullName, Ticket.AssignedAnalyst, Ticket.CreatedBy,
Ticket.LastModifiedBy, Location.LocationName
ORDER BY SystemUser.Alias
I have another table which I want to link in but whenever I do it totally recks my stats.
tbl.Activity
tbl.Activity.CreatedBy [Analyst]
tbl.Activity.TotalActivityTime
tblActivity.TicketID FK tbl.TicketID
My thinking of why I need a subreport
the earlier fields eg CreatedBy, AssignedAnalyst, LastModifiedBy will only every come up once per user per ticket each
Activity could come up multiple times on the same ticket.
Is this the correct approach? and if so how do I link it to the main report.
Please ask me if I haven't explained properly and you think you can help.
cheers