SSRS Report Parameters
Aug 6, 2007
Hi,
I have created two parameters as StartDateTime and EndtDateTime and i am displaying in the Page Header section in the Report as
"Report Duration from " & Parameters!DimActivityStartDatetime.Value & " to " & Parameters!DimActivityEndDatetime.Value"
It is displaying at the runtime in the report like
Report Duration from [DimAct].[StartDateTime].&[2007-03-10TO7:30:00] to [DimAct].[EndDateTime].&[2007-03-10TO7:30:00].
But i need to display only the dates. is is displaying with the dimension name also.
Is there any solution to solve this, can anybody help me on this
Thanks
Dinesh
View 5 Replies
ADVERTISEMENT
Nov 18, 2007
Here is a situation in my company:
We have an Office SharePoint 2007 site, we developed a couple of web parts and added them to our site. We used SQL Server Reporting services 2005 as our reporting solution. The reports are hosted on the report center and when we need a report, we open it by sending a URL requesting the report, passing the report parameters in the URL query string. So the report is filtered based on the parameters passed from the web parts.
But since best practices say that you should host reports directly under SharePoint, by configuring the reporting services to run in the SharePoint integrated mode. We followed the steps and installed SharePointRS and we finally succeeded to publish the reports to a SharePoint folder, but we had a limitation: we are unable to pass the report parameters internally to the report hosted in SharePoint. If we passed them in the query string as the report center case, SharePoint neglects them totally.
So the question is: how can I pass parameters internally between a SharePoint web part and a SQL server 2005 reporting services report hosted in SharePoint?
View 1 Replies
View Related
Sep 16, 2015
I am trying to develop a report from cube,and it has one drill through report.when i click on sales amount field on main report,then it open the drill through report with details.Here i passed the **(category,subcat,product)parameters(Cascaded)** to drill through report in action part of main report.In my main report i have two columns .
columns are **Level** and **Salesamount**.
Values are like
**[-]category** **100**
**[-]subcat** **50**
**product** **30**
when i click on 100, parameters are passed & it open the detail report correctly, but when i click on 50,the values for subcat parameter is not getting values in detail report and same as the product also.
Here i used the expressions in parameter values
**pCategory**----iif(inscope(category),!fields.category.value,split(join(Parameters!category.value,","),","))
**psubcat**----iif(inscope(subcat),!fields.subcat.value,split(join(Parameters!subcat.value,","),","))
**pproduct**----iif(inscope(product),!fields.product.value,split(join(Parameters!product.value,","),","))
View 3 Replies
View Related
Feb 8, 2015
Is there a way to subscribe SSRS report using dynamic parameters for email and trigger the report from autosys job so that report should generate the exact time the job is triggered.Let me describe, my SSRS report should be triggered on success of one autosys job. i need to send email parameter and time of report schedule from this autosys job.
View 3 Replies
View Related
Aug 8, 2007
Hi,
I have kept two Report Parameters "StartDate" and "EndDate" and i have selected From Query and viewed the preview. I got the reults but when i am selecting the two dates it is not validating the condition.
I need the results between StartDate and EndDate. For this i have to set any where in the parameters or is there any other way
can you please help me in this
Thanks
Dinesh
View 15 Replies
View Related
Nov 15, 2006
Hello all,
I have a project where I need to automatically pass 2 sets of parameters to a SSRS report and generate PDF files. I have set the defaults for the parameters based on one set of parameters and created a subscription to automatically generate PDF copy. However, I am not sure how to generate the report automatically using the other set of parameters. Also, I don't want to create two report files to accomplish this.
Can you please help?
Thanks in advance,
Saurav
View 1 Replies
View Related
Aug 9, 2007
Hi,
From a aspx page I was able to Pass values (valid values) for the parameters to SSRS report 2005 which uses OLAP cube as datasource and got back the expectd result. but when I pass value other than a valid value i am getting ERROR message. do we always have to pass valid values only? any help is greatly appreciated.
Thanks,
Srik
View 7 Replies
View Related
Aug 24, 2007
I am having issues getting my report parameters to refresh when changing their values. I am running SP1 and am trying to mimic the functionality of the Select All for the multi-valued drop-down list. I have a boolean field that I pass to the query that populates the multi-valued list and set a field value to either what is displayed in the list or a -1 (a non-valid option). I then set the default value of the multi-valued list to the value of the new field I created in the query based on if they want to select all values or not.
This works great on the first choice, if I select no, nothing is checked in the list and if I select yes then everything is selected. However, if I select Yes and select No, everything remains checked. It acts like it does a refresh, but does not.
Has anyone else had a similar issue?
Thanks
View 3 Replies
View Related
Sep 1, 2010
I am trying to setup a process in which a user, who is using a vb.net 2008 application, will need to trigger the creation of two items. The first is SSRS report which will need to be exported to PDF format to a shared folder on the network.
This report accepts one parameter. The second thing that will need to be created at the same time is an excel file with data exported from SQL Server 2008 which is generated through an SSIS package. A couple things to note. The excel file and the pdf file need to have the same file name, other than the extension.
For example P00000001_20100831.pdf and P00000001_20100831.xlsx and will both be stored in the same network share. The filenames need to be created dynamically at run time and will be based on a parameter being passed to the report.
So far I have the portion that creates the excel file working fine. The way I create that is as follows. I have a stored procedure that creates a job which calls the SSIS package and passes the appropriate parameters to the SSIS package.
After the job is created I immediately run it and then delete the job. Ok, everything works fine with that.
Now I cant seem to figure out how to get the pdf created. If possible I would like to keep this portion together with the already created job or package. I am running SQL Server 2008 standard so the data driven subs are out. I have thought about create a time subscription and then just using a SQL task in the package to execute the subscription but couldnt figure out how to pass the parameter to the report and create the filename.
View 6 Replies
View Related
May 22, 2015
I have a third party app that passes parameters (main dataset query) from the app to SSRS. Unfortunately, when the parameters are passed from the app they will contain equal signs ("=") in front of each parameter. For example, the parameters that may be passed to the main dataset query should be:
"HYDRO, OKO, ONEPL, TECHNI"
However, the parameters that are passed from the app, get to SSRS as:
"=HYDRO, =OKO, =ONEPL, =TECHNI"
Again, this is for the main dataset query and there may be one parameter or there may be any number of them.
Basically, I need to strip the "=" signs from the parameters. whether there is one parameter or ten.
I believe that I will need a custom function to strip the equal signs?
View 5 Replies
View Related
Aug 27, 2015
I made one report in SSRS 2008 in which getting data from one SharePoint List.
three parameters in report :
Country
StartDate
EndDate
I am using query which I created with CAML.
query is running well and data is coming correctly if I run this on Query designer.and date format must be YYYY-MM-DD.but when I try to run through on run time then the date control is showing format dd/mm/yyyy.
I change the regional settings of windows and SharePoint site to English(United States). and when I select date control it is also putting date in format like "YYYY-MM-DD'. and in that format report is working well in Query designer view.But on run time still it is not working.
View 3 Replies
View Related
Mar 6, 2015
We have SSRS reports (pointing to SQL 2012) containing cascading parameters that we have deployed on SharePoint 2013 and once a user makes a selection to the parent parameter, child parameters are getting refreshed based on the selection in the parent parameter and then we see this:
Once we hit Apply, the Loading image comes up and approximately10 seconds later, The whole webpage gets refreshed and the parameter selections get reset to default parameters.
This is getting frustrating because there are about 10 parameters in the report and once a user makes selections and hit apply if the page gets reset, the user has to make all the selections again.
We are working with Microsoft support on this who suggested us to increase the timeout setting of DistributedCache service on all our SharePoint servers which did seem to work initially but I do see this issue happening occasionally.
View 4 Replies
View Related
Nov 23, 2007
Hi,
I have a need to display on screen AND email a pdf report to email addresses specified at run time, executing the report with a parameter specified by the user. I have looked into data driven subscriptions, but it seems this is based on scheduling. Unfortunately for the majority of the project I will only have access to SQL 2005 Standard Edition (Production system is Enterprise), so I cannot investigate thoroughly.
So, is this possible using data driven subscriptions? Scenario is:
1. User enters parameter used for query, as well as email addresses.
2. Report is generated and displayed on screen.
3. Report is emailed to addresses specified by user.
Any tips on how to get this working?
Thanks
Mark Smith
View 3 Replies
View Related
Apr 24, 2007
Hi,
Does anyone know of a link or list that has all the parameters for the "rs:" section of the URL access parameter, except for the ones in the Microsoft books?
Thanks,
View 1 Replies
View Related
Oct 29, 2013
I have a SSRS report with four parameters,and I want to be able to enter information for two of the parameters and run the report opposed to all four of them. However, when I select allow blanks and only select the parameters that I want to run the report by, the report come back blank..Essentially, I want to be able to the run report by different parameters without having to enter information for all parameters at the same time.
View 2 Replies
View Related
May 3, 2007
How do I jump to another report based on a value in my current report. The report that I am jumping from has no parameters, just values.
View 7 Replies
View Related
Apr 30, 2007
Hi,
I have created a report with the report server project template.
the report is created from stoked procedure having defaut input parameters.
With visual studio, i publish my report on reportserver. whenever i access to my report on this url :
http://localhost/ReportServer/Pages/ReportViewer.aspx?%2fReport+Project4%2fReport4&rs:Command=Render. the created report is with the default parameters.
I would like to know if i can transmet parameters for the stocked procedure to build the report with the request i want.
I tried to put parameter directly in the url in this way
http://localhost/ReportServer/Pages/ReportViewer.aspx?%2fReport+Project4%2fReport4&rs:Command=Render&@region='toto'
but without success.
my error message is that one
An attempt was made to set a report parameter '@region' that is not defined in this report. (rsUnknownReportParameter)
My stocked procedure is :
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
ALTER procedure [dbo].[akli] @region varchar ='m'
as
select * from dbo.Report2 where region=@region
The request used to buid the report ?
DECLARE @region varchar
EXECUTE dbo.akli @region
What is wrong in that ?
Thanks for your help.
Arioule
View 1 Replies
View Related
Aug 4, 2007
Hi,
I have created some parameters in SSRS designner and viewing the reports its coming fine. but if i delete one paramter and viewing the preview it is giving an error that to add the paramater.
I have removed the parameter in the Report menu --> Report Parameters. whether i have to remove anywhere else or any other way to solve this problem
Can you please help me in this
Thanks
Dinesh
View 1 Replies
View Related
Oct 9, 2015
I have done the following and a domain user would not access report created a login to the SQL server to the user (this SQL Server is where data source DB is)went to site setting in Report Manager and made this use a system userright clicked on report folder and made this user in the browser roleeven checked that in the report in question, the user is already in the browser role Still the user would not access the report! "User .......... does not have required permission" is the error message I am getting.
View 6 Replies
View Related
Jul 5, 2012
I have written a report visual studio. The report has 10 multi-value parameters that pull data from their individual data sets within the reports. When running the report from within Visual Studio it renders fine. There are no errors reported, only a warning related to a pathname I have use to retrieve image data and display on the report.Deployment of the report is error free.When I view the report I briefly get the "Loading" splash window, but then nothing. None of the headers or static text is displayed. The results window is blank.
The report defaults all the parameter values. In trying to debug the issue I have found by reducing the number of parameter values the report will render. Once I have all the values added, the report does nothing.Below is the query being used for the report. The where clause in the query shows the parameters being used and the syntax.We are running on Windows Server 2008 R2 and SQL Server 2008 R2.
Ralph
SELECT RTRIM(a.ITEMNMBR) AS Style, RTRIM(a.ITEMDESC) AS Description, a.ITMSHNAM AS UPC, c.LOCNCODE AS Store, d.LISTPRCE AS ListPrice, a.CURRCOST AS Cost,
a.USCATVLS_1 AS [Main Category], a.USCATVLS_2 AS Market, a.USCATVLS_3 AS [Alternate Retail], a.USCATVLS_4 AS Country, b.ITEMXTRAS_1_Type AS Type,
b.ITEMXTRAS_2_Finish AS Finish, b.ITEMXTRAS_3_SubCategory AS SubCategory, b.ITEMXTRAS_4_Department AS Department,
[code]...
View 7 Replies
View Related
Sep 21, 2015
I have a ssrs report having 2 tables in with 4 columns in each. When I go to export option in preview I can see all data coming in one excel sheet, But I am trying to get 2 tables in 2 different pages in Excel when I export.First page of excel comes with first table data with 4 columns and second page of excel comes with second table data with 4 columns .
View 2 Replies
View Related
Jun 29, 2015
I'm wondering how to print a SSRS report without bringing up a report viewer. Is there way to print(PDF format) the SSRS report in the web application( .net ) directly from the "print" button without bringing up a report viewer?
View 2 Replies
View Related
Apr 29, 2008
Hi,
I'm encounter lately some weird behaviour of SSRS in BIDS as well as after deploying on Reporting Server.
I'm running basic classical SQL SSRS Reports with Oracle DB connection. My reports have header and footer pagination and well defined report layer configuration. All the reports are simple based on one table and some basic parameters passed to query.
In query builder from BIDS from data tab, the query is running fine without any other execution delays. Also the query is runnign fine in PL/Dev environment.
When I switch in "Preview" mode the report hangs in execution and just showing "Report is being generated" without any resuts. After a while is generating an execution error (after 20 min).
The behaviour is the same after deployment on Report Server .
I now...here it comes...the problem is intermitent...some times the report is working...but most of the times it hangs on execution.
I checked the report from top to bottom and nothing's wrong from design perspective.
On other reports I don't have this problem and I don't understand where to start to investigate.
Any suggestions...I'm stuck here.
Thanks
View 1 Replies
View Related
Mar 28, 2008
Hi,
I am having hard time in sending parameters to the report server through reportviewer control from my application. Could anybody help me on this issue?. Is there any way to send the parameters and also what kind of configuration do i need on my report project so that it can accept parameters from my application.
Thanks,
View 9 Replies
View Related
Nov 28, 2007
Good morning, all
I have a really cool Budget report which has two matrices on it. One is used/visible if the user selects four levels of grouping, and one is used if the user selects only three levels of grouping. The four choices for grouping are four fields, Par, FERC, Point, and Resource.
Since grouping is optional, I need a way to pass the parameter for a field that is not grouped on from the main report to the drillthrough report. For example if the user chooses to group on all fields but Point, I need to pass the report parameter that was used by the main report for Point to the drillthrough report as a report parameter.
So, I tried testing the three grouping levels values and if none were equal to "Point" then pass in the parameter by putting the following expression in the Parameter Value box for the Point parameter on the Navigation tab of the datacell of the main report that is the drillthrough link:
=iif(
Parameters!GroupLevel1.Value <> "Point"
and
Parameters!GroupLevel2.Value<>"Point"
and
Parameters!GroupLevel3.Value<>"Point"
,
Join(Parameters!PNTPoint.Value,",")
,
Fields!Point.UniqueName
)
But this is not working; the drillthrough report shows a blank dropdown for the Point parameter and I have to manually set it. Does anyone see an error in the syntax of the iif statement?
Any references, links, resources or good clean jokes would be greatly appreciated.
Thanks,
Kathryn
View 1 Replies
View Related
Oct 22, 2007
Dear All,
Is it possible to poplulate some control like Dropdownlist (for example, with Product names Or Product Ids) from database table in SSRS project type and then filter report by choosing various choice pre-populated in dropdownlist control.
Project Type is : SQL Server Reportings 2005.
Desired Action: Report will run in browser, User will choose specific product and Run the report(filter) to show that product relate results.
any help,
Thanks,
View 4 Replies
View Related
Oct 6, 2015
How do I get data on my linked report based on my grouped subtotal and grand total from the main report. The subtotal and grand total are calculated columns.
I have a 3 columns in my matrix in the SSRS summary report. Actn_COAST, ActnCITY and NumbOfAccts.
The following is code for my summary report. The results are shown below.
SELECT Distinct ActnCITY, Count(ACCT) as NumbOfAccts,
CASE WHEN ActnCITY in ('NY', 'OH', IN, 'NJ', 'SC', 'NC') THEN 'EAST COAST'
WHEN ActnCITY IN ('CA'. 'NV', 'UT', 'WA', 'OR') THEN 'WEST COAST'
ELSE 'OTHER'
END AS Actn_COAST
FROM tbl1
where ACTNDATE between @STARTDT and @EndDT
Code for my detail report contains the following SQL
SELECT * FROM tbl1 where ACTNDATE between @STARTDT and @EndDT AND @ActnCITY = ActnCITY
I have linked my report based on the NumbOfAccts column. I am able to get data if I click any of the NumbOfAccts values related to the state I want. However when I am not sure how to make the subtotal and grand total work. I want when I click on the subtotal of either coast, I should be able to see records of that coast e.g., if I select 37 I should be able to see all the records in East Coast. If I click on the Grand Total, I only want data related to those 2 coasts.
View 2 Replies
View Related
Nov 7, 2007
While exporting a SSRS 2005 report in CSV format ,can we include the report headers and footers also to be exported .
Thanks .
View 1 Replies
View Related
Sep 5, 2007
Hi,
I'm having problems navigating from one report to another one if the second report has a multi-valued report parameter. When I navigate to the second report, I don't pass any parameters, but I get an error "parameter is missing a value" for the multi-valued report parameter. I have it setup as allow "multi-value" and "blank value". Any idea what the issue might be?
Thanks.
View 3 Replies
View Related
Jun 22, 2015
How to display the logo in middle of report header , The logo is embedded in the Image folder . The column of the report are static. we are using SSRS 2008
View 6 Replies
View Related
Dec 14, 2007
hai iam new to ssrs, please help me.
i have student billbale information assume what ever data it. i need to to dispaly total amount for the student at
Bottom Of Report By Daily, Weekly, Monthly, SYTD . take any example, i want to know formula.
thanks to advanced
Jacks v
View 1 Replies
View Related
Mar 12, 2007
In multivalue parameters by default an option "All" was appearing. You can select both "All" and any of the individual parameters. However the latest report I created suddenly appeared with "(Select All)" as well as "All". (Select All) actually selects (or deselects) all items.
Does anyone know where (Select All) came from, is this a new thing in SP2? How do you control it.
Also, is there a functionality where you can select "All", but if you then select another paramater it automatically deselects "All"?
Richard
View 6 Replies
View Related
Oct 21, 2015
I have a report which works fine with visual studio but when i uploaded the same into report server and tries to access it through IE or chrome or anything its dam slow.
how to get rid of this issue?
View 4 Replies
View Related
