SSRS And ASP.Net And Windows Integrated Authentication Failure In Internet Explorer
Jun 1, 2006
I have a very confusing problem that I'm going to attempt to relay concisely:
I have a LAN on which I'm running an Intranet web site built in ASP.Net 2.0 and using SSRS / Sql Server 2005 on the same server.
The name of the box is "warehouse" or "warehouse.mydomain.us." When I ping "warehouse," I get a response from 137.86.166.8, as I should. Likewise, I get a response from 137.86.166.8 when I ping "warehouse.mydomain.us." If I do a "ping -a" on 137.86.166.8, it correctly resolves to "warehouse.mydomain.us." Based on the facts presented in this paragraph, I believe that my DNS is working as expected.
Using IE (6.0.2900.2180.xpsp_sp2_gdr.050301-1519) with "low" security settings, I navigate to http://warehouse.mydomain.us/lex/ (Lex is the name of the app) and it authenticates me to the index page (which calls the SSRS web service to get and display a list of available reports), except that I get the login prompt three times. If I hit F5 (refresh), I get three more login prompts and then I get a 401.1 error. From this point, no matter what I do, I can not see the index page again without closing and restarting IE.
I know that IE only passes credentials to certain sites, so I add my domain (http://warehouse.mydomain.us/) to the Local Intranet list ( Tools->Internet Options->Security->Local Intranet->Advanced) and then I can refresh and see my index page once, but I still get 3 login attempts and then the same thing happens -- I refresh and go through 3 logins and then get a 401.1.
If I now change my address bar to read http://137.86.166.8/lex, I get a single login and it works like a champ. This makes me think that there's a DNS problem, so I open up Mozilla Firefox and wouldn't you know it -- Firefox works like a champ all around -- one single sign-in, it keep credentials between Lex and SSRS, and it appears to use the DNS correctly. However, I can't use Firefox because I can't get any of the SSRS reports to look like they're supposed to in Mozilla-based browsers.
Argh.
I have set my IE securtiy settings to "Low." I have added the primary domain to the Local Intranet list and also to the Trusted Sites list (but you can't do both at the same time). I have even added the internal IP to my "hosts" file.
Does anyone know anything that might be a help to me in getting this figured out?
Other notes of interest:
My machine is an XP machine, but is not on the domain, but I do have a valid domain login that I use and it works in Firefox without problem.
View 6 Replies
ADVERTISEMENT
May 15, 2006
Hi all,
I've got two applications which both have a database on my MS SQL 2000 server. The problem is, one application must use Windows Integrated Authentication (which it is currently using and cannot be changed) whilst the other application which I'm trying to configure must use a SQL password.
Since the server has already been configured to use Windows Integrated Authentication for the existing database and application, how do I configure the other database to use the SQL password?
Thanks.
View 1 Replies
View Related
May 12, 2006
Hi all,
My work is using a shared application
which accesses a MSSQL 2000 database. To access the application, the
folder on the Windows 2003 Server is shared and users can access the
folder through a shared drive.
For the application to access the
database, it uses an ODBC connection to the MSSQL server which
originally used the SA password.
We have recently switched to using
Windows Integrated Authentication because we believe it offers a
higher level of security. However the only way in which we have been
able to enable this is to add the windows users to the SQL server.
The problem with this is that the
application sets permissions for individual users on what records
they can see within the database. We have found that by adding the
windows users to the SQL Server, they can bypass the permissions the
set by the application by simply using any application that can use
an ODBC connection, such as Enterprise Manager, and see all the
database.
One way around this would be to set up
domains of users with access privileges to the tables which reflect
the permissions set by the application, and configuring a view of the
data so they may only see the records that they have permissions to.
However to do this would require a high administrative cost to ensure
that changes made in the application are reflected in the privileges
of the SQL server.
Instead, is there a way the SQL server
can authenticate that the ODBC connection is coming from the correct
application using Windows Integrated Authentication?
This would allow the applcation to
determine security, and stop users from connecting to the SQL server
using other applications.
Alternatively, can the SQL server,
using Windows Integrated Authentication, also ask the application to
supply a username and password?
Any help with this matter would be
greatly appreciated.
Thanks!
View 4 Replies
View Related
Feb 24, 2007
If my SQL Server authentication is windows integrated authentication, whenever my application makes a connection to SQL server does it contact the windows active directory domain controller to authenticate the windows user account? How does windows integrated authentication work in the background?
View 9 Replies
View Related
Jul 23, 2005
Hi,I have a peculiar problem (or maybe not). I have SQL clients installedon XP boxes. These XP boxes are a member of let us say "XYZ" domain.SQL Server is installed on one of the boxes having Windows 2000 Serverin the same network. The installation has been done on local domainaccount. Since SQl Server has been installed with Windowsauthentication, what happens if the XYZ domain fails. Will it bepossible for all clients to access the database present on SQL Serverin the Win 2K box. I think I have made myself clear upto some extent.Please throw light on how to accomplish the connectivity between SQLclients and server in case of domain failure.Regards,Vinodi
View 2 Replies
View Related
Aug 12, 2015
I have an acctest server (XX-ATS-ASSHP102) running SSRS, SQL DB Engine & SSAS. I'm trying to configure NATIVE SQL Reporting Services to use a data source with Windows Integrated mode towards a SSAS cube on the same server. When I use the servername (or 127.0.0.1) it works perfectly. But when I use the DNS name bidb.acctest.internal it fails with the error "The connection either timed out or was lost.". The profiler on SSAS says "anonymous login" so the Kerberos login is broken at some point.The weird thing is that this works perfectly in production environment, but I've missed something in the ACCTEST environment.The SPN for the serviceaccount running SSAS has correctect SPN:s:
MSOLAPSvc.3/bidb.acctest.internal
MSOLAPSvc.3/bidb.acctest.internal:MSSQLSERVER
MSOLAPSvc.3/XX-ATS-ASSHP102
MSOLAPSvc.3/XX-ATS-ASSHP102.XX.XXXXXXXXXXX.net
MSOLAPSvc.3/XX-ATS-ASSHP102.XX.XXXXXXXXXXX.net:MSSQLSERVER
MSOLAPSvc.3/XX-ATS-ASSHP102:MSSQLSERVER
The SSRS account has delegation with "any service". No account has the "sensitive" flag.DNS names are A-records, except the hostname for the SSRS site which is a c-name, but it's identical in production.The "impersonate client after login" and "replace token" permissions are correct in the policy.The rsreportserver.config says:
<Authentication>
<AuthenticationTypes>
<RSWindowsNTLM/>
</AuthenticationTypes>
<RSWindowsExtendedProtectionLevel>Off</RSWindowsExtendedProtectionLevel>
<RSWindowsExtendedProtectionScenario>Proxy</RSWindowsExtendedProtectionScenario>
<EnableAuthPersistence>true</EnableAuthPersistence>
</Authentication>
both in production and in acctest env..
View 2 Replies
View Related
May 9, 2007
Has anyone else experienced SQL Express resetting to Windows Authentication only instead of mixed mode for logins after a power failure. I only noticed it happen today as we had 2 power outages in the office and it happened both times. If anyone has seen this happen or knows of a fix please let me know.
View 1 Replies
View Related
Aug 12, 2015
We have see login failures for windows accounts. Below is the error message.
Description: In our env most logins are windows accounts. Initially we thought it is an UAC issue and we tried to launch the SSMS using "Run as Administrator". However, we are seeing login failures.
Enviroment:
Microsoft SQL Server 2014 - 12.0.2402.0 (X64)
RTM Enterprise Edition (HyperVisor)
Error Message in Error Log :
2015-08-10 22:36:45.290 Logon Error: 18456, Severity: 14, State: 11.
2015-08-10 22:36:45.290 Logon Login failed for user 'domainloginname'. Reason: Token-based server access validation failed with an infrastructure error. Check for previous errors. [CLIENT: 10.xxx.xxx.xxx]
[code]....
We tried dropping this account and re-creating the windows account with same permissions but still result is same. It throws same error message. Login failure message !!!
View 9 Replies
View Related
Jan 3, 2008
Hi,
When i access my reports thru my application, reports are working fine, But when anonymous access is unchecked in the Reportserver and windows authentication is checked, reports are not working, Can anyone sugggest, how to work with the reports using windows authentication or integrated authentication.
Thanking You
View 1 Replies
View Related
Nov 29, 2007
Using Forms Authentication With Windows Apps--
I've used the code from UILogon.aspx (Forms Authentication Security Extension) to extend a proxy server in a windows application to manage the cookie when connecting to a Reporting Services web service.
When the proxy class is instantiated I get this error on the AuthCookie property:
'server.AuthCookie' threw an exception of type 'System.NullReferenceException'
The code executes properly in UILogon.aspx and AuthCookie is set to a null reference.
Please adviseif you can assist debugging this:
The code:
------------------------------------------------------
//using directives
-------------------------------------------------------
using System;
using System.Collections;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.IO;
using System.Text;
using System.Text.RegularExpressions;
using System.Web.Services.Protocols;
using System.Windows.Forms;
//using rs2005 = Microsoft.SqlServer.ReportingServices.ReportService2005;
using rs2005 = Microsoft.Samples.ReportingServices.RSExplorer.ws_reportservice2005;
using System.Runtime.InteropServices;
using Microsoft.SqlServer;
using Microsoft.SqlServer.MessageBox;
using System.Globalization;
using System.Net;
using System.Web;
-----------------------------------------------
// proxy class
--------------------------------------------
public class ReportServerProxy : rs2005.ReportingService2005
{
protected override WebRequest GetWebRequest(Uri uri)
{
HttpWebRequest request;
request = (HttpWebRequest)HttpWebRequest.Create(uri);
// Create a cookie jar to hold the request cookie
CookieContainer cookieJar = new CookieContainer();
request.CookieContainer = cookieJar;
Cookie authCookie = AuthCookie;
// if the client already has an auth cookie
// place it in the request's cookie container
if (authCookie != null)
request.CookieContainer.Add(authCookie);
request.Timeout = -1;
request.Headers.Add("Accept-Language",
HttpContext.Current.Request.Headers["Accept-Language"]);
return request;
}
[System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Usage", "CA2201oNotRaiseReservedExceptionTypes")]
protected override WebResponse GetWebResponse(WebRequest request)
{
WebResponse response = base.GetWebResponse(request);
string cookieName = response.Headers["RSAuthenticationHeader"];
// If the response contains an auth header, store the cookie
if (cookieName != null)
{
Utilities.CustomAuthCookieName = cookieName;
HttpWebResponse webResponse = (HttpWebResponse)response;
Cookie authCookie = webResponse.Cookies[cookieName];
// If the auth cookie is null, throw an exception
if (authCookie == null)
{
throw new Exception(
"Authorization ticket not received by LogonUser");
}
// otherwise save it for this request
AuthCookie = authCookie;
// and send it to the client
Utilities.RelayCookieToClient(authCookie);
}
return response;
}
private Cookie AuthCookie
{
get
{
if (m_Authcookie == null)
m_Authcookie =
Utilities.TranslateCookie(
HttpContext.Current.Request.Cookies[Utilities.CustomAuthCookieName]);
return m_Authcookie;
}
set
{
m_Authcookie = value;
}
}
private Cookie m_Authcookie = null;
}
View 1 Replies
View Related
Dec 17, 2007
Help! On my desktop some security warning came up and my friend clicked "ok" when it said "block". Apparently it was warning her that internet explorer was trying to contact the internet. So...now internet explorer cannot display anything and it is the only browser I have on my computer. I am so frustrated I can't figure out what on earth I can change to fix this. Please...someone help me figure out why I can't contact the internet? My internet connection is fine, and the troubleshooting feature in explorer keeps telling me so.
Thanks!
View 1 Replies
View Related
Jun 11, 2007
Greetings All,
I installed SQL 2000 with SP4 on a 2003 Server. I added a NT Group to the Server and created 2 users exactly the same in the SQL Server Enterprise Manager.
My issuse is with the other user I created. When I go to a database in the Server Enterprise Manager and right click on tables, and select New Table with my user, the New Table window pops up with no problem. When the other user follows the exact same steps, Internet Explorer opens up and says page not found.
Is this an SQL Issue or maybe an IIS issue?
Thanks in advance.
View 9 Replies
View Related
Sep 4, 2007
Hey,
I'm trying to enter reports using Internet Explorer 7, but it shows me an empty Document map.
When I'm trying to enter the same reports from other computer using Internet Explorer 6, the Document map is filled.
I compared the security options on both machines, and also added the URL of the server to the Trusted sites, but the problem still exists.
The server environment is:
WINDOWS 2003 R2 (SP2)
MSSQL 2000 (SP4) + REPORTING SERVICES
I'm trying to access the report using Windows XP (SP2)
Anyone ever handled this issue?
Any ideas how to solve it?
Thanks in advanced,
Ravid
View 7 Replies
View Related
Aug 3, 2006
Dear Sir / Madam,
Sub: Performance Issue on Internet Explorer
6.0
System
Properties:
O/S: Windows XP 5.1
SP2
Browser: I.E 6.0 SP 2
My Name is Rajesh. I
have got an Issue on I.E 6.0. I need your assistance. I have Two Multiple
Selected Drop-Down List (DDL) on an HTML Page. One DDL contains around 3000
Rows(values). If I am transffering All values from one DDL to another DLL
through For-Loop by using Javascript it takes around 1 Minute in I.E 6.0 whereas same
Logic works not more than 1 Second in
Mozilla/FireFox.
Could you please guide me to solve the
above mentioned issue in I.E. Here below i have attached the functionality part
also...
strSelSource, strSelTarget are two Drop-Down List
for(var
i=0;i<document.getElementById(strSelSource).options.length;i++)
{
intTempLen =
document.getElementById(strSelTarget).options.length
document.getElementById(strSelTarget).options[intTempLen] = new
Option(document.getElementById(strSelSource).options.text,document.getElementById(strSelSource).options.value)
document.getElementById(strSelSource).options = null;
i--;
}
Above Loop takes around 1 Minute in I.E 6.0 but not more than 1 Second
in Mozilla/FireFox.
I am eagerly waiting for your
response.
Regards
View 3 Replies
View Related
Jan 23, 2007
Hi,
I have an query.
Does Internet Explorer generate logs files. If so where does the files get generated.
Thanks in advance.
View 1 Replies
View Related
Oct 10, 2000
When I try to view a database information in the Enterprise Manager by just clicking on the database. I get an internet explorer script error:
" An error has occurred in the script on this page.
Line: 350
Char: 1
Error: 'CON_MENUPAGE' is undefined
Code: 0
URL: file://C:MSSQL7HTMLdatabase.htm ".
I try to replace the database.htm and when it didn't work, tried to install sql7.0 again but it also didn't work.
Any advise.
View 1 Replies
View Related
Mar 28, 2008
I have a report in which I have a link like:
Code Snippet
="javascript:void(window.open('<myURL>', '_blank'))"
Now I have two problems:
This link doesn't work in IE7, it does simply nothing... (In IE6 a new window is opened, it works as expected)
I've deployed the report on another reporting server and this time in IE6 a new window is opened but the URL is equals to "javascript:void....." so IE displays an error message ("unable to display page...."). Is there something to configure on the server?Thanks in advance
View 2 Replies
View Related
Aug 21, 2007
How can I hide the Internet Explorer Menu and Tool Bar in SQL Reporting.
View 7 Replies
View Related
Jan 5, 2008
I am running a report which takes a long time to render. It has 500K rows in it that need to be summed and grouped. After 5 minutes IE prompts for a password. I set the report time out to 15 min just to see if it would make a difference. I even set the IIS timeout to an to 15 min as well.
I know that its bad to run a report this big, but I'm just curious why it prompts for a password. In case a user runs the report. Report uses dates so its possible they could go way back and not realize its 500K rows. I am assuming it is an IE issue with the browser and found a registry edit, but I don't really want to edit registries on my users' computers.
View 1 Replies
View Related
Aug 25, 2006
Hi,I'm using SQL Server 2005. My Connection String looks like that at the moment: <add name="LocalSqlServer" connectionString="Data Source=xx;Initial Catalog=xx;Persist Security Info=True;User ID=xx;Password=xx" providerName="System.Data.SqlClient"/> Now I'd like to change this kind of authentication to Integrated Windows AuthenticationI added the WorkerProcess IIS_WPG to the permitted Users but it didn't help.Changed the Connection String to this:connectionString="Server=xx;Database=xx;Trusted_Connection=True;"All I'm getting is that my NetworkService is not permitted to access DB when I try to connect to the DB in ASP.NET.How can I properly configure that? Thanks!
View 4 Replies
View Related
Mar 4, 2008
Can I open a Internet Explorer web page by Stored Procedure?
View 14 Replies
View Related
Aug 20, 2007
Hi,
I am writing project in asp .net with sql server 2005. But I need support him by some applications like deamon in linux systems.(but it will be in windows) So i write it in java. I download jdbc driver and install it. I wrote simple project:
package MainW;
//import javax.mail.*;
//import javax.mail.internet.*;
//import com.sun.mail.smtp.*;
//import javax.swing.*;
//import java.awt.*;
//import java.awt.event.*;
//import java.io.*;
import java.sql.*;
//import java.text.DateFormat;
//import java.text.SimpleDateFormat;
//import java.util.*;
//import java.util.Date;
class Main
{
public static void main(String[] args)
{
String connectionUrl = "jdbc:" + "sqlserver://localhost;databaseName=ASPNETDB.MDF;IntegratedSecurity=True";
Connection con = null;
Statement stmt = null;
ResultSet rs = null;
try
{
Class.forName("com.microsoft.sqlserver.jdbc.SQLServerDriver");
con = DriverManager.getConnection(connectionUrl);
String SQL = "SELECT * FROM aspnet_Users";
stmt = con.createStatement();
rs = stmt.executeQuery(SQL);
// Iterate through the data in the result set and display it.
while (rs.next())
{
System.out.println(rs.getString(4) + " " + rs.getString(6));
}
}
catch (Exception e)
{
e.printStackTrace();
}
finally
{
if (rs != null) try { rs.close(); } catch(Exception e) {}
if (stmt != null) try { stmt.close(); } catch(Exception e) {}
if (con != null) try { con.close(); } catch(Exception e) {}
}
}
}
But i have error:
2007-08-20 15:20:59 com.microsoft.sqlserver.jdbc.AuthenticationJNI SNISecGenClientContext
WARNING: Initialize context failed
2007-08-20 15:20:59 com.microsoft.sqlserver.jdbc.SQLServerConnection SSPIData
WARNING: ConnectionID:1 TransactionID:0x0000000000000000 Authentication failed code-2146893052
com.microsoft.sqlserver.jdbc.SQLServerException: This driver is not configured for integrated authentication.
at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDriverError(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.SSPIData(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.sendLogon(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.logon(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.access$000(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection$LogonCommand.doExecute(Unknown Source)
at com.microsoft.sqlserver.jdbc.TDSCommand.execute(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.executeCommand(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.connectHelper(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.loginWithoutFailover(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.connect(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerDriver.connect(Unknown Source)
at java.sql.DriverManager.getConnection(Unknown Source)
at java.sql.DriverManager.getConnection(Unknown Source)
at MainW.Main.main(Main.java:29)
I am googling about this error second day but i cannot find solve.
Please help.
View 1 Replies
View Related
Jan 3, 2007
From what I have understood, Reporting Services could be configured to use Basic Authentication. In this way, a user can access a RS-server across the internet and he/she will be prompted for a valid username/password when trying to access.
However, from what I can understand this username and password will be sent uncrypted over the Internet (from the client machine to the RS-server), right?
My problem is, I need to give access to users acress the internet to a RS-server. The users uses all kind of operating systems (Windows, Linux, MacOS tec). And the communication needs to be encrypted.
How would you recommend me to implement security for this solution? I guess some kind of "Forms authentication" will have to be used? But how to make sure the data traffic is encrypted? And where do you recommend me to store the username and passwords? In an Active Directory on the server side, or in a separate database on the server side?
regards Andreas
View 7 Replies
View Related
May 11, 2007
How to give authentication for Send Mail Task component?
View 4 Replies
View Related
Oct 26, 2007
Hi,
My OS is Windows Vista and I'm running SQL Server 2005 with SP2 and I have installed JDBC driver sqljdbc1.2 on my laptop.
I tried to connect it to the database Employee on Database Enginee Server
Here is the code:
import java.sql.*;
import com.microsoft.sqlserver.jdbc.*;
public class MSsqlConnect{
public static void main(String[] args) {
System.out.println("Microsoft SQL Server 2005 Connect Example.");
Connection conn = null;
String url ="jdbcqlserver://localhost:1433;integratedSecurity=true";
String dbName = "Employee";
String driver = "com.microsoft.sqlserver.jdbc.SQLServerDriver";
String userName = "Gurumurthy";
String password = "pa55word";
try {
Class.forName(driver).newInstance();
conn = DriverManager.getConnection(url);
System.out.println("Connected to the database");
conn.close();
System.out.println("Disconnected from database");
} catch (Exception e) {
e.printStackTrace();
}
}
}
When i run the program i got the msg:
C:UsersGurumurthyDesktop>java MSsqlConnect
Microsoft SQL Server 2005 Connect Example.
26 Oct, 2007 10:05:09 AM com.microsoft.sqlserver.jdbc.AuthenticationJNI <clinit>
WARNING: Failed to load the sqljdbc_auth.dll
com.microsoft.sqlserver.jdbc.SQLServerException: This driver is not configured for integra
ted authentication.
at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDriverError(Unknown Sou
rce)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.sendLogon(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.logon(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.access$000(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection$LogonCommand.doExecute(Unknown
Source)
at com.microsoft.sqlserver.jdbc.TDSCommand.execute(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.executeCommand(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.connectHelper(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.loginWithoutFailover(Unknown S
ource)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.connect(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerDriver.connect(Unknown Source)
at java.sql.DriverManager.getConnection(Unknown Source)
at java.sql.DriverManager.getConnection(Unknown Source)
at MSsqlConnect.main(MSsqlConnect.java:16)
Could anyone pls help me out to fix it.
thanks & regards,
Gurumurthy
View 1 Replies
View Related
Mar 26, 2007
Hi,
My sqljdbc.jar is located in the following directory
C:Program FilesMicrosoft SQL Server 2005 JDBC Driversqljdbc_1.1enu
And I copied x86 directory from C:Program FilesMicrosoft SQL Server 2005 JDBC Driversqljdbc_1.1enuauth
And used following steps to establish database connection
Class.forName("com.microsoft.sqlserver.jdbc.SQLServerDriver");
String connectionUrl = "jdbc:sqlserver://localhost:1433;IntegratedSecurity=true;";
Connection con = DriverManager.getConnection(connectionUrl);
and getting the following error
Mar 26, 2007 12:51:50 PM com.microsoft.sqlserver.jdbc.AuthenticationJNI <clinit>
WARNING: Failed to load the sqljdbc_auth.dll
com.microsoft.sqlserver.jdbc.SQLServerException: This driver is not configured for integrated authentication.
at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDriverError(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.sendLogon(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.logon(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.connectHelper(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.loginWithoutFailover(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.connect(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerDriver.connect(Unknown Source)
at java.sql.DriverManager.getConnection(DriverManager.java:512)
at java.sql.DriverManager.getConnection(DriverManager.java:193)
at testproject.JdbcDriverTest.main(JdbcDriverTest.java:60)
Please help me out in fixing this issue.
Thanks
Purnima
View 10 Replies
View Related
Apr 18, 2007
Hi there,I have installed MS SQL Server 2005 on my machine with windows authentication. But now I want to switch the authentication mode to SQL Authentication. I am unable to switch, I can’t find the proper way to do so here in 2005.Could any one help me in doing this?Thank you,-Ahsan
View 1 Replies
View Related
Mar 6, 2007
We're trying to determine the best way to implement an authentication mechanism for our reporting services solution. Basically, we are exposing a web application to the internet, and allowing a forms authenticated user to access our report server somewhere within our intranet to view reports. I've browsed msdn and found that there are two approaches:
1. create a custom authentication extension for reporting services
2. create a restricted domain user that is allowed to access the report server
Going with approach 2 and assuming I'm using a ReportViewer control, in order to authenticate with the report server (using the one domain user created specifically for report server access), are we supposed to just provide an instance of an object implementing IReportServerCredential containing the domain user information to the Credentials property of the ReportViewer.ServerReport before accessing the report? Is this the correct way to implement approach 2? Also, if implementing approach 2 is so simple compared to approach 1, why would anyone choose to implement custom authentication extension if they don't need fine-grain access control on the report server level?
Thanks for any help and suggestions!
View 11 Replies
View Related
Mar 25, 2004
Hello,
(Using win2k, sqlserver2k, framework 1.1)
I have an fairly data-heavy application that uses Windows authentication (Trusted connection/aspnet account) to connect to Sql Server. The site uses IIS basic authentication.
On the dev server everything works fine but when I move to the live server things get strange and it starts to crawl along. (Pages load OK but then it just crawls as it loads the datagrids etc. Sometimes it brings back incomplete/incorrect data )
BUT When I use Sql Authentication to connect to Sql Server and there is no problem at all!
Ok, there is something obviously wrong with the live server (which is identical setup to dev)but I dont know where to start.
Any ideas??
View 2 Replies
View Related
Mar 26, 2008
Hallo there,
I just upgraded from Windows XP Pro to Windows Vista Bussiness and tried to reinstall SQL Server 2005 Developers Edition. After the installation i downloaded (using microsoft windows update) and installed all the service packs for sql and vista available.
My problem is when i open sql server management studio and try to connect to my default instance using windows authentication and database engine, an 18456 error occurs.
I enabled all the protocols and all the ports
I disabled windows firewall and antivirus (eset nod32)
I installed all service packs available
I have also installed Visual Studio 2005 without installing sqlexpress
But nothing happens!
Please i am very desperate, any information will be gratefully accepted.
This is my installation Information
Code Snippet
Microsoft SQL Server Management Studio 9.00.3042.00
Microsoft Analysis Services Client Tools 2005.090.3042.00
Microsoft Data Access Components (MDAC) 6.0.6001.18000 (longhorn_rtm.080118-1840)
Microsoft MSXML 3.0 5.0 6.0
Microsoft Internet Explorer 7.0.6001.18000
Microsoft .NET Framework 2.0.50727.1434
Operating System 6.0.6001
Thank you in advance,
Patonios
View 3 Replies
View Related
Dec 19, 2007
does anybody know why MS doesnt consider Basic Authentication a viable solution for Inter/Xtra net access to RS? I'm re reading the documentation at http://msdn2.microsoft.com/en-us/library/bb283249.aspx but so far am not getting what the Security Extension options accomplish that can't be accomplished with much less effort using some form of Basic Authentication.
View 25 Replies
View Related
Feb 6, 2008
Well, I have SQL Server 2005 SP2 Reporting Services installed and configured in sharepoint integrated mode, so I am deploying reports in sharepoint libraries. Also I configured sharepoint to use forms authentication with builtin AspNetSqlMembership provider, but after this action I couldnot open reports through sharepoint library, instead of this, error was displayed mentioned below. I searched and found hotfix Cumulative Update 3 build 3186 for this issue, request it from microsoft support and applied it, but nothing has changed!
Error I have been experiencing is following:
An unexpected error occurred while connecting to the report server.
Verify that the report server is available and configured for
SharePoint integrated mode. --> The request failed with the error
message:
--
<html><head><title>Object moved</title></head><body>
<h2>Object moved to <a href="/_layouts/login.aspx?ReturnUrl=
%2f_vti_bin
%2fReportServer%2fReportService2006.asmx">here</a>.</h2>
</body></html>
I continued to dig and find out that this hotfix should update Microsoft.ReportingServices.SharePoint.UI.WebParts.dll from version 9.0.3042.0 to new version 9.0.3180.0, but when I checked file version after applying hotfix, it remained the same as was before i.e. 9.0.3042.0. Apparently this cumulative update does not fix this issue.
anyone has any idea how to solve it? Thanks in advance.
sorry for my poor english :-)
View 2 Replies
View Related
Apr 7, 1999
Hi All,
Can we implement a table level (object) security on the groups of the windows NT domain using the integrated windows NT security so that one group has
the permission over one table to update ,select ,delete the information and other group has permission has for some other table.
Thanks
Ajay
View 3 Replies
View Related
