hi
i have a SSRS report where matrix is embedded into table.
when i view the deployed report in IE, it works fine
But when i view the report in FIREFOX browser.. the report for toss..
the alignment of the report is completely screwed up :-(
My client badly requires Firefox support for all their reports
Any suggestion and help would be appreciated
Thanks
Hi ,
Report when displayed in firefox browser the alignment is disturbed alot.
But when same report is viewed in IE browser its working fine.
Thanx in advance.
Thanks & Regards,
KK
When I try to run a simple table report using Safari or Firefox the experience is less than stellar.
Using Safari the report never returns, basically the pag body is blank.
Using Firefox the table layout is very compressed.
Anything changes in the works to allow the reporting server to be used by non IE browser.
We run in a multi-platform environment and need the multiple browser support.
Thanks.
--sean
SQL Server 2005 Reporting Services
I was using Windows 7 and had SSRS 2014 installed.Having set up the inbound rule on Windows Firewall (port 80), to allow SSRS through, I was able to browse to the Report Manager URL, by opening up Internet Explorer as 'Administrator'..
However, now that I have upgraded to Windows 10, I am unable to open the URL.In fact there is now way for me to open Edge as administrator and open my Report Manager URL.
I am facing an issue when report with graph deployed to BI, I can see the misalignment issue in the browser however, when report is run in the Report Builder/SQL Server Data tool or export into PDF then there is no issue.
How to fix the misalignment issue of the graph in the browser. See the both graph below -
Graph Misalignment Issues Screengrab in Browser
Graph without misalignment issue in PDF or Report development tool
I am using the Internet Explorer browser.
I would like to know how to show all the records returned (upto 1000) in one single page on a web browser. I am able to get the required report in IE but in case of Firefox it hangs.
Did some test and found that Firefox is able to render a report of upto max 300 records in a single page without getting hanged but report is coming very slow. While you scroll the scroll bar it€™s moving with Jerks. with 200 records in a single page is not getting hanged but report is faster than 300 records display. But by 500 records Firefox hangs. I understand it might be depending on the hardware also but am not sure.
Can anybody give me a good solution to display upto 1000 records in a single page or if its a limitation, where can i get the documentation of it.
Thanks and regards
Niaz Khan
Dear Friends,
I am facing the following issue in SSRS:
Problem:
When SSRS report is viewed in Reportviewer control in FIREFOX browser, then Print,Zoom and Search tool bar icons are not displayed.
The same problem is also seen, when SSRS report is viewed using URL in Firefox browser.
Description:
When SSRS report is viewed using reportviewer control in IE browser, then All tool bar icons are displayed.
Following are the Toolbar icons displayed:
1. Search.
2. Next Prev Button
3. Print
4. Zoom
5. Export
But, when the same SSRS report is viewed using Reportviewer control in Firefox browser, then following toolbar icons are not displayed:
1. Print
2. Zoom
3. Search
I would appreciate any pointers to resolve this issue.
Thanks,
S Suresh
It seems the features are disabled when using any of the above because of compatibility issues with scripting/ActiveX not being properly supported by the FireFox and Chrome.
I believe the control determines the browser you are using is not IE and will not render the controls to prevent unexpected behavior because if the lack of ActiveX support. This can be seen when you compare the HTML of a page using IE8 and that of either IE11, FF, Chrome you'll see that the HTML for a zoom drop down control will show up in the IE8 browser and not in the others.
As for IE11 it presents itself as a Mozilla browser. eg: "User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; Trident/7.0; rv:11.0) like Gecko" so when the control see's this it wont generate any of the controls believing the browser can't support it, even though IE11 should certainly be capable of doing so. I wanted to know if this is correct and if this is a bug?
Browser Support for ReportViewer "The ReportViewer Web server control is used to embed report functionality in an ASP.NET Web application. The type of browser used to view the application determines the kind of functionality that you can provide in a report. Use the table provided in this topic to find out which of the supported browsers are subject to report functionality restrictions."
The page mentions that the following wont be supported by other browsers The following features are not supported in third-party browsers:
Document mapSearching within the reportZoomFixed table headersThe progress indicator for report processing (a green spinning wheel) is not available for server reports, or for locally processed reports that are configured for asynchronous processing.
<rsweb:ReportViewer ID="ReportViewer1" runat="server" Visible="true" Height="100%" ShowZoomControl="True" ShowPrintButton="True"
Width="100%"Â ProcessingMode="Remote"Â ShowCredentialPrompts="False"Â ShowParameterPrompts="False"
DocumentMapCollapsed="False"Â ShowBackButton="True"Â ShowRefreshButton="False"Â InteractivityPostBackMode="AlwaysSynchronous"
ShowExportControls="False"Â BackColor="#c4dcfb"Â AsyncRendering="false"Â WaitMessageFont-Names="Verdana"Â WaitMessageFont-Size="14pt"SplitterBackColor="#C4DCFB"Â ShowDocumentMapButton="True"Â DocumentMapWidth="20%">
</rsweb:ReportViewer>
When I deploy a report, and then browse to it with FireFox, I only see 2 inces of the report. I can scroll through the entire report, but only see the 2 inch window's worth at any time.
Its like the html element the report gets put into has a hard coded height, and doesnt auto size to show the eintire report.
It works fine with IE, but we are a FireFox shop.
Anyone know how to fix this?
How can I get my report to render correctly in Firefox?
View 4 Replies View RelatedHi,
How to import analysis browser in SSRS. I need features similar to SSAS Cube browser and SSAS dimention browser.
Regards
Spandan
I have a chart with series that needs conditional colour for three conditions. One condition must be transparent. I have tried the various IFF or SWITCH expressions below and some work fine in SSDT but when I deploy them to the browser the formatting is lost. This simple IFF expression works. The series is transparent as required both in SSDT (Visual Studio BIDS) and IE11 and Firefox browsers but I need two other conditions.Â
=IIF(Fields!ExhibitionID.Value = -1, "#00ffffff", "Red")
Both of the expressions below work in SSDT (Visual Studio BIDS) as expected but when deployed to the browser none of this formatting is rendered and all series are in blues even the ‘transparent’ series. No red at all.
=IIF(Fields!ExhibitionID.Value = -1,"#00ffffff", IIF(Fields!ExhDepartment.Value = 27,"Orange","Red"))
=Switch(Fields!ExhibitionID.Value
= -1,"#00ffffff",Fields!ExhDepartment.Value = 27,"Orange",(Fields!ExhDepartment.Value <> 27) AND (Fields!ExhibitionID.Value <> -1),"Red")
I have tried deleting various files RDL and DATA. I have tried uploading the file from report manager in IE and I have tried editing the file in report manager.
Hi -
I got through the installation hoops for SQLEXPRESS Reporting Services in Vista and set up the default configurations in Report Services Configuration. I can explore the default directory for "Reports" in IIS7, but I can't browse in IE. I get the "The report server is not responding. verify that the report server..." message in the browser. This is after I migrated the app per the initial http 500 error using the preferred method - %systemroot%system32inetservAPPCMD.exe migrate config "Default Web Site/Reports".
I'm running Vista Ultimate, VS2005, SQLEXPRESS SP2. I've tried running IE as admin and also I've disabled UAC from gpedit.msc - ...Windows SettingsSecurity SettingsLocal PolicySecurity Options and unchecking UAC.
Thanks,
Mike
Hi,
I have created a sample report called Report1 in SSRS 2005. This currently is running locally on my workstation.
I can even browse to it using the http address i.e. http://localhost/Reports
The question is: How can someone else access this report on my machine. They can not browse to my machine by typing http://12.32.2.344/Reports
Do I need to do any configuration in my local IIS?
Thanks
Hi,
I have deployed my report to the report server and send a link to the users to view the report on the browser. But when the report is viewed, it shows up as "restore down" instead of "full screen". For example, the report shows up in the browser with all the information below.
SQL Server Reporting Services
Home > school > hwal> test >
Proficient By Ethnic within School and Grade Rdg and Math
How do I set up the report to make it show up as full screen report without all the details above?
I have a very simple test report created in Visual Studio 2005 as an rdlc file in my dll. The rdlc file is in the dll because it is built off of the business objects. I need to be able to stream this file (i.e. not use a report viewer) to the browser.
I found code that I included below, but get an error:
The report definition for report 'Monkey.Report1' has not been specified
Yes my test namespace in my dll is named "Monkey" )
Anyway, any idea on how to solve this?
Code Snippet
using Microsoft.Reporting.WebForms;
protected void Page_Load(object sender, EventArgs e)
{
LocalReport localReport = new LocalReport();
localReport.ReportEmbeddedResource = "Monkey.Report1.rdlc";
ReportDataSource reportDataSource = new ReportDataSource("FamilyCollection", Monkey.Family.RetrieveAll());
localReport.DataSources.Add(reportDataSource);
string reportType = "PDF";
string mimeType;
string encoding;
string fileNameExtension;
string deviceInfo =
"<DeviceInfo>" +
" <OutputFormat>PDF</OutputFormat>" +
" <PageWidth>8.5in</PageWidth>" +
" <PageHeight>11in</PageHeight>" +
" <MarginTop>0.5in</MarginTop>" +
" <MarginLeft>1in</MarginLeft>" +
" <MarginRight>1in</MarginRight>" +
" <MarginBottom>0.5in</MarginBottom>" +
"</DeviceInfo>";
Warning[] warnings;
string[] streams;
byte[] renderedBytes;
//Render the report
renderedBytes = localReport.Render(reportType, deviceInfo, out mimeType, out encoding, out fileNameExtension, out streams, out warnings);
//Clear the response stream and write the bytes to the outputstream
Response.Clear();
Response.ContentType = mimeType;
Response.AddHeader("content-disposition", "attachment; filename=foo." + fileNameExtension);
Response.BinaryWrite(renderedBytes);
Response.End();
}
hye everyone,
i have Problem for the prompts will display at the top of the report in the browser :
1)go to the report manager on computer and set the
set the Prompt User check boxes to checked.
--> auto check
2)select the report viewer control, if you are using it, and set the Parameters property to false.
--> the eror mesage will be display
" The ' field " parameter is missing value. "
what should i do...any idea
thanks in advance
thank you very much
Hello,
I printed Browser Report,but it is getting Blank pages in middle,
that is header part only visible for 2 pages and then data getting printed,
any ideas??
I am planning to use SQL Reporting services in a new remote hosting centre and must provide ad-hoc reporting to a small number of users plus the access to running of previously prepared reports to a wider user base. User access must be thin client, browser based.
The client workstations are locked down to a particular security configuration and there is no possibility of installing .Net Framework on them. Normally, only browser-based applications can be used at the desktop client.
Apart from using Reporting Services (Citrix), what options do I have to provide users with the Report Builder in this scenario please? Are there any COTS packages that would provide this functionality?
TonyB
I've made a report in which there are always one tablix under each textbox. I tried to produce a document map by giving document map labels for each textbox.
Everything works fine in Report Builder (3.0), but when run in the browser (IE, Firefox) the document map doesn't seem to work: when trying to navigate with document map by clicking the labels the report runs to the end of the report - not to the textbox where it should go...
I tried to solve problem using bookmarks instead of Document map, but there similar problem occurred. Bookmarks seem to work with Google Chrome, but I need a solution that would work better in most of the browsers.
So the problem seems to be that document map label navigates to bottom of the page. Added pagebreak after each tablix worked but since the tablixes are longer than screen there's still problem - document map should be set to navigate to the top of the page.
I have designed plenty of reports in VS 2005 and have been deployed on the reporting server. I have been designed one web page which shows UI through which user can access which ever reports he/she wants. I have kept some buttons on UI. When button is clicked appropriate report accessed and displayed on the browser.
Â
Problem is that, report width is about 40 - 50 % of the screen and report viewer shows the report on the left align of the screen. I just want to show the report at the center of the screen. Also, any property I can use to set the report size in the proportion of screen in Percentage(%).
I am having an issue with report printing. I have used a specific font (Garamond) for all the report elements when creating the report in Bus Int. Dev. Studio. While printing from the preview pane, the report prints with the Garamond font (as intended).
But the issue is that after deployment, printing the report (with browser print control) does not print it with the Garamond font (looks like it is using the Arial or a similar font). This changes the whole look and feel of the report. I have tried printing the report from the reportserver, report manager and through URL access. All the 3 methods are giving similar results that the print output is not using the on-screen font.
Anybody else face similar issues? Is there any workaround for this? TIA.
Hello,
I am trying to print a report in landscape mode from VS 2003 from designer preview or at run time. The users don't want to change a mode manually. I tried to make width 11 or 11.5 in and height 8.5in with zero margins and 0.5in (tried a lot of combinations) - doesn't work! still printing in portrait. Please help! Thank you
Hi,I've run into a curious problem with MS SQL Server 8.0. Using sp_help andSQL Query Analyzer's object browser to view the columns returned by a view,I find that sp_help is reporting stale information.In a recent schema change, for example, someone lengthened a varchar columnfrom 15 to 50 characters. If we use sp_help to find out about a view thatdepends upon this column, it still shows up as VARCHAR(15), whereas theobject browser correctly reports it as VARCHAR(50).Dropping and recreating the view fixes the problem, but we have quite a fewviews, and dropping and re-creating all of them any time a schema change ismade is something we want to avoid. I tried using DBCC CHECKDB in hopes thatit would 'refresh' SQL Server's information, but no luck.(if you're curious as to why I don't just use the object browser instead,read boring technical details below)Has anyone seen this before? Is there some other way (other thanre-creating every view) to tell SQL Server to "refresh" it's information?Thanks!-Scott----------------------Boring Technical Information:The reason this is an issue for us (i.e., I can't just use the objectbrowser instead) is that our object model classes are built using standardmetadata query methods in Java that seem to be returning the same staleinformation that sp_help is returning. These methods are a part of thestandard JDK, so we can't easily fiddle with them. Anyway, as a result, ourobject model (at least with respect to views) may not match our currentschema!
View 5 Replies View RelatedI know how to size my report to export successfully to A4 portrait PDF and I can position the report in the centre of the browser window BUT I can't do both! I would really like to be able to position it in the centre of my browser window AND be able to print to A4 portrait PDF. If I have the report in the centre (by adjusting the body to take up the whole screen and positioning the report in the centre), it is cut in half when exported to PDF. I can only get it to export to PDF correctly, if the report is aligned to the left of my screen in the browser. Is there a way to move the body to the centre or any other tricks?
View 5 Replies View Relatedafter installing SQL Server 2008 R2 and the Reporting Services, I've managed to access the Report Manager URL....Reports through the web browser on the machine itself. But if i am trying to connect to on my client browser it does not find the Report Server.Do I need to configure the server in any way? Do I need to configure the firewall?
View 2 Replies View RelatedHi
I had sql server 2005 standard edition and express edition and sql 2000 desktop edition all installed on my xp notebook.
Whe i tried to create a maintenance plan in sql 2005 standard edition i got an error saying that it couldn't load something (which looked like it might be dll) so I tried to reinstall sql 2005 standard edition over the top to replace the dlls. However the install wizard told me that it can't do anything as all components are already installed!
So i decided to remove SQL 2005 and start again.
In add remove programs i removed various components (like vss writer, and one or two others) then when i clicked on SQL 2005 to remove it I got a message saying that it had already been removed and would i like to remove it from the add remove programs list.. so i said yes.
It actuallly appears that it is installed (after a fashion) although i can't connect to it anymore in ssms. If i put the cd in to try to reinstall it still tells me that it's already installed....i'm stuck now!
So.. i need to do something drastic to remove sql 2005 (as i can't remove it from the add remove programs and the CD won't let me reinstall over the top)
Can anyone help me with any suggestions to physicall remove it
I am trying to verify and create new user based on Billing Statement information. The user may not be the ID of the statement but has a
relationship to that ID.
Here is the data I will be passing:
Statement PrepDate
Statement PatBal
BillTo Address
BillTo Name
Patient DateofBirth
Patient Name
relevant table info:
BILTOS
BillToID, Name (user match), Address1(user match)
STMTHIST
BillToID, PrepDate (user match), PatBal (user match)
PATIENTS
BillToID, Name (user match), BirthDate (user match), Email, PatientsID
PATWEB
PatientID, UserName (user input), PIN (user input), Question (user input), Answer (user input)
I also check to make sure the username doesn't already exist in the PATWEB table
here is what I have so far that is not working (table reference not unique - BILTOS)
INSERT INTO PATWEB (PatientID, UserName, PIN, Question, Answer, LastAccess)
SELECT PATIENTS.PatientID, 'bcolladay@pdsmed.com', 'osx5ief7*', 'What', 'green', CurDate()
FROM PATIENTS, BILLTOS
JOIN PATIENTS BILLTOS ON PATIENTS.BillToID = BILLTOS.BillToID
WHERE not exists (select * from PATWEB Where PATWEB.PatientID = PATIENTS.PatientID)
AND PATIENTS.BirthDate = '1971-05-03'
AND PATIENTS.Name LIKE 'lui%'
AND STMTHIST.BillToID = PATIENTS.BillToID
AND STMTHIST.PatBal = '215.00'
AND STMTHIST.PrepDate = '2008-03-05'
AND BILLTOS.Address1 = '987 Worley St'
AND BILLTOS.Name LIKE 'Lui@'
so I am checking to see if the billing statement and other info they supplied matches before I create the account in PATWEB.
I appreciate any help, thanks
Say for example I have the following 2 database tables, the first one contains the old employee data, and has the fields shown below:
oldEmployeeID
FirstName
LastName
DateOfBirth
HiringDate
TerminationDate
and another one containing the new employee data with similar fields but instead of oldEmployeeID, it is showing the newEmployeeID.
During the conversion process, something were messed up and instead of putting in the original hiring date of the workers into the new employee database, the conversion date was put in, which, depending on the mood of HR ladies, could be any date, and at the same time, of course, new employee join the company, and we assume their hiring dates were entered correctly. On top of that, there are some employee who were terminated before the conversion took place but we still need to keep a record of that.
And I created a third table, say, emplyeeAll with similar fields to the employee data tables.
So here is what I need to do: if the firstName, lastName and DateOfBirth in the old employee data table and the new employee data table matches, I would assume they are the same employee, hence I would put the information for the employee obtained from the new employee data table to the employeeAll table, with the Hiring Date changed to the Hiring Date of the old employee data table (and do not copy the record from the old employee table to prevent duplicates), otherwise, I would simply copy and paste the data in new and old employee table to my employeeAll table.
I know this is really confusing, but...well...hope you know what I am saying...
Is it possible to have a SQL statement for all these? If so, how should the statement looks like?
Thanks a lot!
Regards,
Anyi
"" Then MM_LoginAction = MM_LoginAction + "?" + Request.QueryString
MM_valUsername=CStr(Request.Form("userId"))
If MM_valUsername "" Then
MM_fldUserAuthorization=""
MM_redirectLoginSuccess="/private/private.asp"
MM_redirectLoginFailed="/private/privatelogin.asp"
MM_flag="ADODB.Recordset"
set MM_rsUser = Server.CreateObject(MM_flag)
MM_rsUser.ActiveConnection = MM_conConsumer_STRING
MM_rsUser.Source = "SELECT LastName, Password"
If MM_fldUserAuthorization "" Then MM_rsUser.Source = MM_rsUser.Source & "," & MM_fldUserAuthorization
MM_rsUser.Source = MM_rsUser.Source & " FROM dbo.PLStaff WHERE supervisor != 570 and LOWER( left(firstname,1)) + LOWER(lastname) ='" & Replace(MM_valUsername,"'","''") &"' AND Password='" & Replace(Request.Form("password"),"'","''") & "' and Emp_state = 1 "
MM_rsUser.CursorType = 0
MM_rsUser.CursorLocation = 2
MM_rsUser.LockType = 3
'response.Write(MM_rsUser.Source)
MM_rsUser.Open
If Not MM_rsUser.EOF Or Not MM_rsUser.BOF Then
' username and password match - this is a valid user
Session("MM_Username") = MM_valUsername
session.Timeout = 30
If (MM_fldUserAuthorization "") Then
Session("MM_UserAuthorization") = CStr(MM_rsUser.Fields.Item(MM_fldUserAuthorization).Value)
Session("manager") = 1
Else
Session("MM_UserAuthorization") = ""
End If
if CStr(Request.QueryString("accessdenied")) "" And false Then
MM_redirectLoginSuccess = Request.QueryString("accessdenied")
End If
MM_rsUser.Close
Response.Redirect(MM_redirectLoginSuccess)
End If
MM_rsUser.Close
Response.Redirect(MM_redirectLoginFailed)
End If
%>
Where do I find out the name of the table being accessed to authenticate the user?
Hi,
I've been asked to sort out a mess as follows:
two dbs on one server...
first db has a user called 'bob'.. that's the login on the server and also the login name on the db in question.
this db has several SP's owned by 'bob' which need to copied to the second db.
Here's where the problem starts.
Somehow, this second db has the standard users it needs, however the db User has a LoginName of 'bob'..
So basically if I try and create a user of 'bob' on the second server which will then allow me to copy these SP's across it says it already exists.. but if I just go ahead and try and copy the SP's it says the User does not exist.
Just to clarify what I mean..
I go into the 2nd db using EM.
go to users:
the visual that appears shows me several users in order with their
Name | Login Name | DB Access
the dbo user is set as:
dbo | bob | 2nd db
basically what I need (I think) is for that login Name to be removed from the dbo user and applied to specific user called bob...
how do I do that?
Fairly new to DBA work. In error log receiving message Error 1105 Can't allocate space for object 'Syslogs' in database 'msdb' because the logsegment is full.
I've looked in books and is this a serious problem, as I've tried to increase the size of the MSBD device but it will not allow me it says the Max size allowed is -1197MB...Is this right
Any help would be good...
I have done the following and a domain user would not access report created a login to the SQL server to the user (this SQL Server is where data source DB is)went to site setting in Report Manager and made this use a system userright clicked on report folder and made this user in the browser roleeven checked that in the report in question, the user is already in the browser role Still the user would not access the report! "User .......... does not have required permission" is the error message I am getting.Â
View 6 Replies View Related