SSRS Report Viewer Execution ' ' Cannot Be Found (rsExecutionNotFound) Reserved.ReportViewerWebControl.axd

Nov 19, 2007

Re: SSRS report viewer Execution ' ' cannot be found
(rsExecutionNotFound) Reserved.ReportViewerWebControl.axd



Every now and then, my users get this error while in the Reportviewer.


Usually, they have to close the window where the report was rendered
and pull it open again. Attempting to open the report again does not
work.


What is this?


I run the report viewer like this:


<rsweb:ReportViewer BackColor="Transparent" ZoomMode="Percent"
width="100%" ProcessingMode="Remote" ID="ReportViewer1"
runat="server">
<ServerReport ReportPath="/myfolder/myreport"
ReportServerUrl="http://myserverr/reportserver" />
</rsweb:ReportViewer>


In my web config:


<compilation debug="true" strict="false" explicit="true">
<assemblies>
<add assembly="System.Data.OracleClient, Version=2.0.0.0,
Culture=neutral, PublicKeyToken=B77A5C561934E089"/>
<add assembly="Microsoft.ReportViewer.Common, Version=8.0.0.0,
Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A"/>
<add assembly="Microsoft.ReportViewer.WebForms, Version=8.0.0.0,
Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A"/>
</assemblies>
<buildProviders>
<add extension=".rdlc" type="Microsoft.Reporting.RdlBuildProvider,
Microsoft.ReportViewer.Common, Version=8.0.0.0, Culture=neutral,
PublicKeyToken=b03f5f7f11d50a3a"/>
</buildProviders>
</compilation>


<httpHandlers>
<add path="Reserved.ReportViewerWebControl.axd" verb="*"
type="Microsoft.Reporting.WebForms.HttpHandler,
Microsoft.ReportViewer.WebForms, Version=8.0.0.0, Culture=neutral,
PublicKeyToken=b03f5f7f11d50a3a" validate="false"/>
</httpHandlers>


Thanks for any help or information.

View 1 Replies


ADVERTISEMENT

Execution '' Cannot Be Found (rsExecutionNotFound)

Jan 24, 2008



We are intermittently seeing this error when viewing a report through the report viewer control.
Our setup is three load-balanced web servers all pointing to a single server that runs Reporting Services (front-end and DB). Do any special steps need to be taken to make RS compatible with a web farm? RS itself is not scaled out, just the calling web servers. Those web servers are set up to share session in a separate SQL Server.
Previous threads on this error seem to involve session timeout, but that doesn't appear to be the case here since we sometimes see the error on the very first request of the report. Refreshing the page will sometimes show the report and sometimes not.
Any suggestions?

View 2 Replies View Related

Execution 'nxpyd155vbm4lk55djklt555' Cannot Be Found (rsExecutionNotFound)

Nov 2, 2007

Configuration:
Reporting Services 2005 running on IIS/6.0 on Server A.
ReportServer and ReportServerTempDB is running on SQL2005 on Server B.

I have a simple SSRS report that runs on Server A and will connect to SQL 2005 on Server B to retrieve data for the report. My report has only one parameter and I use the value of this parameter as a connection string to the database.

Here is an example of the parameter:
data source=Server B; initial catalog=TestDB; uid=sa; password=abc123


From the report manager, this report is configured to use custom data source.This report is also configured to use Credentials supplied by the user running the report.

Problem:
When I run the report through the Report Manager, as expected, I was prompted to enter a login name and password for report data source. I entered values in both fields and click on the View Report button. Now I am prompted to enter the connection string for the report parameter. I entered a value for parameter and click on the View Report button and I got the following error message:

Execution 'k5jkbu550bjzfy55j1uw1055' cannot be found (rsExecutionNotFound)



When I go back to the Data Sources property screen in report manager and change the credential from
Credentials supplied by the user running the report TO Credentials stored securely in the report server and hardcode the username and password there, the report will run fine.

Can you tell me what the error message means? Any suggestion to get this resolved would be greatly appreciated.

View 2 Replies View Related

SSRS Report Rendering Different In VS2005 And In Report Viewer Via URL Access

Apr 17, 2008

Hello,
I'm using Reporting Services to render a text (stored in sql as varchar(max)). The text is all plain text, with some lines having trailing spaces.

Source text file i've imported to SQL via SSIS:
CLIENT: 10055
STATEMENT 2007
DATE:1002993
THIS IS THE OTHER STATEMENT
COLUMN1 COLUMN2 COLUMN 3
TRY THIS


*Note the trailing spaces on the line before 'STATEMENT 2007'.

I've designed a report using the Report Project in VS2005 to retrieve this text via a stored procedure. When I test the report using the 'Preview' tab in the IDE, it looks good
CLIENT: 10055
STATEMENT 2007
DATE:1002993
THIS IS THE OTHER STATEMENT
COLUMN1 COLUMN2 COLUMN 3
TRY THIS



But when I deploy the report and run it using URL Access:

CLIENT: 10055
STATEMENT 2007
DATE:1002993

THIS IS THE OTHER STATEMENT

COLUMN1 COLUMN2 COLUMN 3
TRY THIS

On all lines with trailing spaces, they (the trailing spaces) have been removed. This is affecting my formatting of some reports and statements. We really want to use the report viewer as it has built in paging, print and export capabilities.

Why does it look okay in VS2005 but different in Report Viewer via URL Access and Report Manager?

Note: When I export as PDF, it looks okay.

The stored procedure I use to return the data is a CLR Hosted assembly as below:



Code Snippet
Partial Public Class StoredProcedures
<Microsoft.SqlServer.Server.SqlProcedure()> _

Public Shared Sub GetPagedDocument(ByVal inText As SqlString)
Dim dr As SqlDataReader
Dim row As New SqlDataRecord(New SqlMetaData("RowText", SqlDbType.Text))
Dim cmd As New SqlCommand("select cast(doc as varchar(max)) as 'DOCTEXT' from testdoc WHERE id='" + inText + "'")
Dim cn As New SqlConnection("context connection=true")
cn.Open()
cmd.Connection = cn
SqlContext.Pipe.SendResultsStart(row) 'initialise the resultset to be returned
dr = cmd.ExecuteReader
'If no records in result set, return.
If Not dr.HasRows Then

row.SetString(0, "There is no document to display or you do not have permission to view the document.")
SqlContext.Pipe.SendResultsRow(row)
SqlContext.Pipe.SendResultsEnd()
' SqlContext.Pipe.Send("There is no document to display.")
Return
End If
'Read rows in the result set
dr.Read()

'Get the entire text
Dim docText As String = dr.Item("DOCTEXT")
'debug
row.SetString(0, docText)
SqlContext.Pipe.SendResultsRow(row)
SqlContext.Pipe.SendResultsEnd()
Return
'end debug

End Sub
End Class




Any help will be appreciated.

View 3 Replies View Related

Reporting Services :: Fixing Ssrs Report Table Column Heading While Scrolling Is Not Working In Report-viewer?

Dec 14, 2012

i just clicked on Advanced mode in Column Group, and then in Row Group Side i set Fixed Data=true for first  top static. I'm using local report not server report and i'm displaying that local report in Reportviewer. Now also its not working....

View 6 Replies View Related

Report Manager Execution Cannot Be Found

Feb 6, 2008

Hello.
Every time we try to view reports using Report Manager this error (
Execution 'kj1mek55bmhvft55cihmeb55' cannot be found) is occured. However, we can view reports using ReportViewer control from VS2005 and subscriptions works properly (without this error).


We are using integrated security to login to Report Manager.
Configuration: SQL Server 2005, SSRS 2005 SP1, Windows 2003, IIS 6.0
How can we fix it?
Please let me know if you need any additional information.
Thanks.

View 4 Replies View Related

Running A SSRS Report In A Report Viewer Control In .net

Jun 29, 2007

Do I need the report server running in order view a SSRS report in a report viewer control? I've created my report in .net and it works great when I'm viewing it in visual studio, but can I run it my web app without the report server.

View 1 Replies View Related

Integrate SSRS With Report Viewer

Oct 25, 2007



Hi All,



I'm going to use report viewer to view the SSRS reports that I create. I have created bunch of reports. But I can publish only one report on report viewer. How can I publish more than one reports there just like on report manager. Can I view those reports just clicking links of each reports? How can I make links?
When I use reportview in visual studio it allows me to create only one report and when I dploy it straightaway it brings up the report in web form, but not the link like we see on report manager.
Is there anyway I can create links for each reports?

Or in other words, I want to integrate report server and report viewer. But I dont have a very good idea about report viewer.
So please can anyone explain the basic steps?

Thanks

View 1 Replies View Related

Integrating SSRS With Report Viewer

Oct 25, 2007



Hi All,



I'm going to use report viewer to view the SSRS reports that I create. I have created bunch of reports. But I can publish only one report on report viewer. How can I publish more than one reports there just like on report manager. Can I view those reports just clicking links of each reports? How can I make links?
When I use reportview in visual studio it allows me to create only one report and when I dploy it straightaway it brings up the report in web form, but not the link like we see on report manager.
Is there anyway I can create links for each reports?

Or in other words, I want to integrate report server and report viewer. But I dont have a very good idea about report viewer.
So please can anyone explain the basic steps?

Thanks

View 11 Replies View Related

DB Engine :: Error - Report Execution Has Expired Or Cannot Be Found

Sep 22, 2010

I am running a huge SSRS 2008 report and it gets rendered sometimes and sometimes it gives me an error,"The report execution has expired or cannot be found. (rsExecutionNotFound)”.

When I see SQL Server log after this issue comes I see following message there; "A significant part of sql server memory has been paged out. This may result in performance degradation. Duration: 300 seconds. Working set(KB): 97672, memory utilization 42%" .what is the issue and how to fix it.

View 21 Replies View Related

SSRS And ASP.NET Multiple Reports Within One Report Viewer

Feb 6, 2008



Ok,

I am writing an app that will allow a user to select various information for displaying in a report. The sql is dynamically generated when the user clicks on "Get Report". Currently, I am using a gridview with a datasource and I pass the query to the datasource and it displays in the grid view. However, our company has expressed a need to migrate reporting to SSRS.

Is there any way that I can use dynamic sql with a template report and feed the dynamic sql to it so that all I would have to do is write a single rdl or rdlc and pass it the sql?

Alternatively, is there a way to have One ReportViewer show multiple parameterized reports. Ie. User selects the report from a dropdown and then selects the parameter options from other dropdowns and when they click "get report" it loads the chosen report with the parameters?

Thanks in advance.

View 4 Replies View Related

Help Needed: Export From Report Viewer &&amp; RDLC From SSRS Server

May 12, 2008



Hi,
I'm have two issues I need to work out.

1) - I need to get the RDL (the RDL format merged with the data, like a rendered report in RDL format) - to pass back to the client Report Viewer. Is there a way to do that? I do not see that as an optional output types.

2) - I need to export to a specific file/path from the client side Reportviewer.. Is this possible? Is there a lower level API for this?

Thank you,

View 4 Replies View Related

SSRS Report Generator Hangs On Execution In BIDS And Report Manager

Apr 29, 2008

Hi,

I'm encounter lately some weird behaviour of SSRS in BIDS as well as after deploying on Reporting Server.
I'm running basic classical SQL SSRS Reports with Oracle DB connection. My reports have header and footer pagination and well defined report layer configuration. All the reports are simple based on one table and some basic parameters passed to query.

In query builder from BIDS from data tab, the query is running fine without any other execution delays. Also the query is runnign fine in PL/Dev environment.
When I switch in "Preview" mode the report hangs in execution and just showing "Report is being generated" without any resuts. After a while is generating an execution error (after 20 min).

The behaviour is the same after deployment on Report Server .
I now...here it comes...the problem is intermitent...some times the report is working...but most of the times it hangs on execution.
I checked the report from top to bottom and nothing's wrong from design perspective.

On other reports I don't have this problem and I don't understand where to start to investigate.

Any suggestions...I'm stuck here.

Thanks

View 1 Replies View Related

Reporting Services :: Running SSRS 2014 Report Viewer In Standard Mode

Jun 4, 2015

Is there any way to get SSRS 2014 report viewer to run in standards mode? We currently host SSRS report viewer in a standards mode IFrame.  Seems to work fine for all browsers but IE8. In IE8, the report detail is missing.

I'm guessing that SSRS Viewer on IE 8 requires Quirks mode.

I noticed this article which states that SSRS 2014 Viewer only works in quirks mode.

Rendering issues with SQL Server Reporting Services reports in Internet Explorer

How do you get the SSRS viewer to run on IE8 in standards mode?

View 3 Replies View Related

Reporting Services :: RDLs Present In SSRS Folder Path But Not Visible In Report Viewer URL?

Jun 9, 2015

I have an issue as to where only some reports are visible within Report Viewer url. But if I navigate to the path of the rdl's there are many more present that should be visible through Report Viewer. The client was recently upgraded, and I seem to have all out of box roles and permission levels yet can only see some of those reports, as if some were manually copied to this folder location at a later point and perhaps some user job needs to be run to reflect import those additional rdl's?

View 2 Replies View Related

Stopping Cancelling Report Execution Reporting Services Ssrs 2005 Using The Web Service Api

Mar 23, 2008

Hello,
How can I stop a report I started by using:
ReportExecutionService rs = new ReportExecutionService()
.
.
.
rs.Render(...)


I need to stop the report when a user clicks a button in my aspx page.

TIA
gad

View 1 Replies View Related

SQL 2005 Reporting Services Displaying Following Log When Exporting Report To A .pdf File. (rsExecutionNotFound)

Dec 29, 2007

I tried to export a reort using SQL 2005 Reporting Services. However Iam getting the following log on the screen :
[logs After upgrading the SQL 2005 with SP2 ]




Execution 'ssem4cntbzve525531im5aup' cannot be found (rsExecutionNotFound)
Description: An unhandled exception occurred during the execution of the
current web request. Please review the stack trace for more information about
the error and where it originated in the code.

Exception Details: Microsoft.Reporting.WebForms.ReportServerException:
Execution 'ssem4cntbzve525531im5aup' cannot be found (rsExecutionNotFound)

Source Error:

An unhandled exception was generated during the execution of the current web
request. Information regarding the origin and location of the exception can
be identified using the exception stack trace below.

Stack Trace:

[ReportServerException: Execution 'ssem4cntbzve525531im5aup' cannot be found (rsExecutionNotFound)]
Microsoft.Reporting.WebForms.ServerReport.GetExecutionInfo() +286
Microsoft.Reporting.WebForms.ServerReport.SetExecutionId(String executionId, Boolean fullReportLoad) +109
Microsoft.Reporting.WebForms.ServerReport.LoadFromUrlQuery(NameValueCollection requestParameters, Boolean fullReportLoad) +90
Microsoft.Reporting.WebForms.ReportDataOperation..ctor() +326
Microsoft.Reporting.WebForms.HttpHandler.GetHandler() +194
Microsoft.Reporting.WebForms.HttpHandler.ProcessRequest(HttpContext context) +44
System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +303
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +64

Can any one help me on this issue ?


Regards,
Nik

View 5 Replies View Related

SSRS 2005 - Email Report On Execution To Dynamic List With Dynamic Parameters = No Schedule

Nov 23, 2007

Hi,
I have a need to display on screen AND email a pdf report to email addresses specified at run time, executing the report with a parameter specified by the user. I have looked into data driven subscriptions, but it seems this is based on scheduling. Unfortunately for the majority of the project I will only have access to SQL 2005 Standard Edition (Production system is Enterprise), so I cannot investigate thoroughly.

So, is this possible using data driven subscriptions? Scenario is:

1. User enters parameter used for query, as well as email addresses.
2. Report is generated and displayed on screen.
3. Report is emailed to addresses specified by user.

Any tips on how to get this working?

Thanks

Mark Smith

View 3 Replies View Related

Execution '' Cannot Be Found

Jun 21, 2007

I am running a .Net web application that accesses many SQL reports using the Report Viewer.



If a report takes quite a while to load or if I leave the web application idle for quite some time, I get an error similar to the following:





Execution ' ' cannot be found



It seems like the connection to SQL times out and it tries to execute an empty SQL query. Is there any way to prevent this from happening?

View 5 Replies View Related

Execution '' Not Found

Sep 7, 2007

I have this annoying error and I cannot find a solution yet. Please help!
I'm generating some reports from a SQL Server 2005 database. I know these reports work fine because I've seen them working, but, sometimes, appearently random, it doesn't create the report, instead, it gives me this error:

Execution '' not found

With nothing inside the ''. Another case is when I try to refresh the report: I generate the report, I see it, and I press F5 to refresh, I get the same error again.

Could anybody help me please? I'm desperate.

View 13 Replies View Related

Execution 'wccc0s552po43i45n10vgmrq' Cannot Be Found

Oct 25, 2006

have developed a couple of simple parameterised reports in SQL Server 2005 Enterprise Reporting Services for my current project. I am now trying to use Visual Studio 2005 and the ReportView control to hook into these remote reports from an application. I have run into an error and am unable to resolve it:


Execution 'wccc0s552po43i45n10vgmrq' cannot be found

I have trawled the Internet and a chapter in "Microsoft SQL Server 2005 Reporting Services" with no joy. Has anyone seen this before. I'm sure it will be something simple that I have overlooked.?

View 13 Replies View Related

Execution 'g00qpkmgjffz0xb1ydmvmx55' Cannot Be Found

Oct 23, 2007

I am getting the following error some times when I am running my report.
Execution 'g00qpkmgjffz0xb1ydmvmx55' cannot be found
Please give me an idea to resolve this issue.

Thanks

View 1 Replies View Related

The Dreaded Execution Cannot Be Found

Jan 23, 2008



Folks i have been dumped into the frying pan. Put in hours and hours of work and research over it already but still can't seem to figure out what the heck is going on. Can an expert listen to my troubles and perhaps share some hints. Thank you so much for reading.

Enviroments
Windows 2003 SP2 x64
SQL 2005 SP2, Reporting service
IIS6 no SSL/Cert with .NET SP1

Both ReportServer and ReportManager was working prior to an unfortunenate event, installing Exchange 2008.

Immediately after the installation of Exchange 2008 we experienced 2 problems
1. SSL certs was now required, which we resolved by unchecking the SSL required option in IIS6
2. After SSL, execution not found occured in ReportManager

Immediately after we discovered the Execution error, we went over logs after logs to see whats going on. Nothing worked
We have, uninstalled Exchange, Uninstalled Reporting service, Reinstalled reporting service, updated report viewer to sp1, increased the timeout limit to 5 minutes, checked and rechecked our login/password on sql asp w3k reporting and till now still no go.



<-- Error messeage -->
This error msg in reporting service i believe is the reason why we are getting Execution not found.
w3wp!session!1!01/23/2008-11:14:02:: i INFO: LoadSnapshot: Item with session: g4bqhtq0pvzpxh55leja4445, reportPath: /Report Bank/Deposit by Account, userName: NT AUTHORITYNETWORK SERVICE not found in the database

and

w3wp!library!1!01/23/2008-11:14:02:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ExecutionNotFoundException: Execution 'g4bqhtq0pvzpxh55leja4445' cannot be found, ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.ExecutionNotFoundException: Execution 'g4bqhtq0pvzpxh55leja4445' cannot be found
<-- Error messeage -->


After reading tons of info, In our case our reports are simple reports, i can generate the report without problem from ReportServer in less than 10 seconds, just without the bells and whisles. But the second i hop on Report manager it will fight me till death with Execution. I think in our case, Its throwning a Username not found in database which might be preventing the creation of session key or the error is causing the render not to happen. If render dosen't happen then no key can be assigned to it?

We have tried to use impersonate via the web.config and also changing Windows account logins etc but none of them work. One thing that is consistent is that the userName: NT AUTHORITYNETWORK SERVICE not found has NEVER changed even if we impersonate or manually hardcode the username.

Can anyone please help us out here!! Thank you.

View 8 Replies View Related

Change Page Title From Report Viewer/Manager To The Actual Report Name?

Jan 26, 2007

Can a person change the page title from "Report Viewer/Manager" to the actual report name?

View 3 Replies View Related

Report Viewer Jump To Issues With Relative Intra-report URLs

Dec 26, 2007

Hello,

Very strange phenomenon with the "Jump to report:" Hyerlink Actions when I deployed my reports to the production servers:

The Actions no longer funcioned properly when attempting to go to one report to another. Sometimes, the same report would come up and sometimes a different report. It appeared that whatever mechanism Report Server uses to construct the proper URL when using "Jump to report:" is unreliable(or the URL is not being honored by the web-server).

All this is happening under the Report Viewer control. I have had to do a painful fix of manually constructing the entire absolute URL and including the reportviewer control in the url.

Any way to get back relative Jump to report: URL's?

Thanks JS

View 1 Replies View Related

Reporting Services :: Generating Excel Report Using Report Viewer At Run Time

Apr 28, 2015

We are generating excel report using report viewer at run time but if excel report having more then 65000 record generating error Microsoft. Reporting Services.OnDemandReportRendering.ReportRenderingException: Excel Rendering Extension: Number of rows exceed.

View 2 Replies View Related

SharePoint Reporting Services Integration 'Execution ... Cannot Be Found'

Aug 6, 2007

I have setup the Sharepoint 2007 Reporting Services add-in and am running into an issue. I was able to get a report to show up in a report viewer webpart once, but after that, I receive a message similiar to the following (for all reports);

'Execution 'ex2ubmetmr13vdffxciursfg' cannot be found '


Any help would be appreicated. I'm including my log file for the error as well as it should be helpful.

<Header>
<Product>Microsoft SQL Server Reporting Services Version 9.00.3042.00</Product>
<Locale>en-US</Locale>
<TimeZone>Mountain Daylight Time</TimeZone>
<Path>c:Program FilesMicrosoft SQL ServerMSSQL.2Reporting ServicesLogFilesReportServer__08_06_2007_12_33_12.log</Path>
<SystemName>DEV-AD-V2</SystemName>
<OSName>Microsoft Windows NT 5.2.3790 Service Pack 1</OSName>
<OSVersion>5.2.3790.65536</OSVersion>
</Header>
w3wp!webserver!6!8/6/2007-12:33:14:: i INFO: Reporting Web Server started
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing ConnectionType to '1' as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing IsSchedulingService to 'True' as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing IsNotificationService to 'True' as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing IsEventService to 'True' as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing PollingInterval to '10' second(s) as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing WindowsServiceUseFileShareStorage to 'False' as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing MemoryLimit to '60' percent as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing RecycleTime to '720' minute(s) as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing MaximumMemoryLimit to '80' percent as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing MaxAppDomainUnloadTime to '30' minute(s) as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing MaxQueueThreads to '0' thread(s) as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing IsWebServiceEnabled to 'True' as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing MaxScheduleWait to '5' second(s) as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing DatabaseQueryTimeout to '120' second(s) as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing ProcessRecycleOptions to '0' as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing RunningRequestsScavengerCycle to '60' second(s) as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing RunningRequestsDbCycle to '60' second(s) as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing RunningRequestsAge to '30' second(s) as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing CleanupCycleMinutes to '10' minute(s) as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing DailyCleanupMinuteOfDay to default value of '120' minutes since midnight because it was not specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing WatsonFlags to '1064' as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing WatsonDumpOnExceptions to 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException' as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to 'System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException' as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing SecureConnectionLevel to '0' as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing WebServiceUseFileShareStorage to 'False' as specified in Configuration file.
w3wp!resourceutilities!6!8/6/2007-12:33:15:: i INFO: Reporting Services starting SKU: Enterprise
w3wp!resourceutilities!6!8/6/2007-12:33:15:: i INFO: Evaluation copy: 0 days left
w3wp!runningjobs!6!8/6/2007-12:33:17:: i INFO: Database Cleanup (Web Service) timer enabled: Next Event: 600 seconds. Cycle: 600 seconds
w3wp!runningjobs!6!8/6/2007-12:33:17:: i INFO: Running Requests Scavenger timer enabled: Next Event: 60 seconds. Cycle: 60 seconds
w3wp!runningjobs!6!8/6/2007-12:33:17:: i INFO: Running Requests DB timer enabled: Next Event: 60 seconds. Cycle: 60 seconds
w3wp!runningjobs!6!8/6/2007-12:33:17:: i INFO: Memory stats update timer enabled: Next Event: 60 seconds. Cycle: 60 seconds
w3wp!library!6!08/06/2007-12:33:18:: Call to GetItemTypeAction(/).
w3wp!library!6!08/06/2007-12:33:18:: i INFO: Catalog SQL Server Edition = Enterprise
w3wp!library!6!08/06/2007-12:33:20:: Call to ListParentsAction(/).
w3wp!library!6!08/06/2007-12:33:20:: Call to ListChildrenAction(/, False).
w3wp!library!6!08/06/2007-12:33:22:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user 'DEV1Administrator' are insufficient for performing this operation., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user 'DEV1Administrator' are insufficient for performing this operation.
w3wp!security!6!08/06/2007-12:33:22:: i INFO: Exception while running with elevated privileges
w3wp!security!6!08/06/2007-12:33:22:: i INFO: The permissions granted to user 'DEV1Administrator' are insufficient for performing this operation.
w3wp!library!6!08/06/2007-12:33:28:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user 'DEV1Administrator' are insufficient for performing this operation., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user 'DEV1Administrator' are insufficient for performing this operation.
w3wp!security!6!08/06/2007-12:33:28:: i INFO: Exception while running with elevated privileges
w3wp!security!6!08/06/2007-12:33:28:: i INFO: The permissions granted to user 'DEV1Administrator' are insufficient for performing this operation.
w3wp!library!6!08/06/2007-12:33:28:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user 'DEV1Administrator' are insufficient for performing this operation., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user 'DEV1Administrator' are insufficient for performing this operation.
w3wp!security!6!08/06/2007-12:33:28:: i INFO: Exception while running with elevated privileges
w3wp!security!6!08/06/2007-12:33:28:: i INFO: The permissions granted to user 'DEV1Administrator' are insufficient for performing this operation.
w3wp!library!6!08/06/2007-12:33:29:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user 'DEV1Administrator' are insufficient for performing this operation., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user 'DEV1Administrator' are insufficient for performing this operation.
w3wp!security!6!08/06/2007-12:33:29:: i INFO: Exception while running with elevated privileges
w3wp!security!6!08/06/2007-12:33:29:: i INFO: The permissions granted to user 'DEV1Administrator' are insufficient for performing this operation.
w3wp!webserver!6!08/06/2007-12:33:29:: i INFO: Processed folder '/'
w3wp!library!9!08/06/2007-12:37:33:: Call to ListParentsAction(http://DEV-ad-v2/mySites).
w3wp!library!9!08/06/2007-12:37:33:: Call to ListParentsAction(http://DEV-ad-v2/mySites).
w3wp!library!9!08/06/2007-12:37:33:: Call to ListChildrenAction(http://DEV-ad-v2/mySites, False).
w3wp!webserver!9!08/06/2007-12:37:34:: i INFO: Processed folder 'http://DEV-ad-v2/mySites'
w3wp!library!9!08/06/2007-12:39:28:: Call to GetSystemPropertiesAction().
w3wp!library!9!08/06/2007-12:40:18:: Call to GetPermissionsAction(http://DEV-ad-v2).
w3wp!library!9!08/06/2007-12:40:18:: Call to GetSystemPropertiesAction().
w3wp!library!9!08/06/2007-12:40:18:: Call to GetPermissionsAction(http://DEV-ad-v2/Test Reports/Report1.rdl).
w3wp!library!9!08/06/2007-12:40:26:: i INFO: Call to RenderFirst( 'http://DEV-ad-v2/Test Reports/Report1.rdl' )
w3wp!library!9!08/06/2007-12:40:29:: Using folder c:Program FilesMicrosoft SQL ServerMSSQL.2Reporting ServicesRSTempFiles for temporary files.
w3wp!webserver!9!08/06/2007-12:40:30:: i INFO: Processed report. Report='http://DEV-ad-v2/Test Reports/Report1.rdl', Stream=''
w3wp!library!9!8/6/2007-12:43:17:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams
w3wp!library!9!8/6/2007-12:53:17:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams
w3wp!library!9!08/06/2007-12:59:05:: Call to GetItemTypeAction(http://DEV-ad-v2/Shared Documents/Reports/Report Project3).
w3wp!library!9!08/06/2007-12:59:05:: Call to GetItemTypeAction(http://DEV-ad-v2/Shared Documents/Reports).
w3wp!library!9!08/06/2007-12:59:05:: Call to GetItemTypeAction(http://DEV-ad-v2/Shared Documents).
w3wp!library!6!08/06/2007-12:59:06:: Call to CreateFolderAction(Reports, http://DEV-ad-v2/Shared Documents).
w3wp!library!6!08/06/2007-12:59:08:: Call to CreateFolderAction(Report%20Project3, http://DEV-ad-v2/Shared Documents/Reports).
w3wp!library!6!08/06/2007-12:59:09:: Call to GetItemTypeAction(http://DEV-ad-v2/Shared Documents/Data Sources).
w3wp!library!6!08/06/2007-12:59:09:: Call to GetItemTypeAction(http://DEV-ad-v2/Shared Documents).
w3wp!library!6!08/06/2007-12:59:09:: Call to CreateFolderAction(Data%20Sources, http://DEV-ad-v2/Shared Documents).
w3wp!library!6!08/06/2007-12:59:10:: Call to GetItemTypeAction(http://DEV-ad-v2/Shared Documents/Data Sources/EDR.rsds).
w3wp!library!6!08/06/2007-12:59:10:: Call to CreateDataSourceAction(EDR.rsds, http://DEV-ad-v2/Shared Documents/Data Sources, True).
w3wp!library!6!08/06/2007-12:59:15:: Call to GetItemTypeAction(http://DEV-ad-v2/Shared Documents/Reports/Report Project3/Report1.rdl).
w3wp!library!6!08/06/2007-12:59:15:: Call to CreateReportAction(Report1.rdl, http://DEV-ad-v2/Shared Documents/Reports/Report Project3, True).
w3wp!library!6!08/06/2007-12:59:18:: Call to SetItemDataSourcesAction(http://DEV-ad-v2/Shared Documents/Reports/Report Project3/Report1.rdl).
w3wp!library!6!08/06/2007-13:02:46:: Call to GetPermissionsAction(http://DEV-ad-v2/Shared Documents/Reports/Report Project3/Report1.rdl).
w3wp!library!6!08/06/2007-13:02:46:: Call to ListParentsAction(http://DEV-ad-v2/Shared Documents/Reports/Report Project3/Report1.rdl).
w3wp!library!6!08/06/2007-13:02:49:: Call to GetPermissionsAction(http://DEV-ad-v2).
w3wp!library!6!08/06/2007-13:02:50:: Call to GetSystemPropertiesAction().
w3wp!library!6!08/06/2007-13:02:50:: Call to GetPermissionsAction(http://DEV-ad-v2/Shared Documents/Reports/Report Project3/Report1.rdl).
w3wp!session!6!08/06/2007-13:02:56:: i INFO: LoadSnapshot: Item with session: kabqahahtxbdrgqfqza3zf45, reportPath: http://DEV-ad-v2/Shared Documents/Reports/Report Project3/Report1.rdl, userName: SHAREPOINTsystem not found in the database
w3wp!library!6!08/06/2007-13:02:56:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ExecutionNotFoundException: Execution 'kabqahahtxbdrgqfqza3zf45' cannot be found, ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.ExecutionNotFoundException: Execution 'kabqahahtxbdrgqfqza3zf45' cannot be found
w3wp!webserver!6!08/06/2007-13:02:56:: e ERROR: Reporting Services error Microsoft.ReportingServices.Diagnostics.Utilities.ExecutionNotFoundException: Execution 'kabqahahtxbdrgqfqza3zf45' cannot be found
at Microsoft.ReportingServices.WebServer.HttpClientRequest.InitForRequest(CatalogItemContext context, UserContext userCtx)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderReport(HttpResponseStreamFactory streamFactory)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.DoStreamedOperation(StreamedOperation operation)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderItem(ItemType itemType)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderPageContent()
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderPage()
w3wp!library!6!08/06/2007-13:03:06:: Call to GetPermissionsAction(http://DEV-ad-v2).
w3wp!library!6!08/06/2007-13:03:06:: Call to GetSystemPropertiesAction().
w3wp!library!6!08/06/2007-13:03:07:: Call to GetPermissionsAction(http://DEV-ad-v2/Test Reports/Report1.rdl).
w3wp!session!6!08/06/2007-13:03:10:: i INFO: LoadSnapshot: Item with session: dpeedqvwmpr3z155qsu54m55, reportPath: http://DEV-ad-v2/Test Reports/Report1.rdl, userName: SHAREPOINTsystem not found in the database
w3wp!library!6!08/06/2007-13:03:10:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ExecutionNotFoundException: Execution 'dpeedqvwmpr3z155qsu54m55' cannot be found, ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.ExecutionNotFoundException: Execution 'dpeedqvwmpr3z155qsu54m55' cannot be found
w3wp!webserver!6!08/06/2007-13:03:10:: e ERROR: Reporting Services error Microsoft.ReportingServices.Diagnostics.Utilities.ExecutionNotFoundException: Execution 'dpeedqvwmpr3z155qsu54m55' cannot be found
at Microsoft.ReportingServices.WebServer.HttpClientRequest.InitForRequest(CatalogItemContext context, UserContext userCtx)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderReport(HttpResponseStreamFactory streamFactory)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.DoStreamedOperation(StreamedOperation operation)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderItem(ItemType itemType)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderPageContent()
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderPage()
w3wp!library!6!08/06/2007-13:03:17:: Call to GetPermissionsAction(http://DEV-ad-v2).
w3wp!library!6!08/06/2007-13:03:17:: Call to GetSystemPropertiesAction().
w3wp!library!6!08/06/2007-13:03:17:: Call to GetPermissionsAction(http://DEV-ad-v2/Test Reports/Report1.rdl).
w3wp!library!6!8/6/2007-13:03:17:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams
w3wp!session!6!08/06/2007-13:03:21:: i INFO: LoadSnapshot: Item with session: gn34sn55qxkdwi55k2fm4y55, reportPath: http://DEV-ad-v2/Test Reports/Report1.rdl, userName: SHAREPOINTsystem not found in the database
w3wp!library!6!08/06/2007-13:03:21:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ExecutionNotFoundException: Execution 'gn34sn55qxkdwi55k2fm4y55' cannot be found, ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.ExecutionNotFoundException: Execution 'gn34sn55qxkdwi55k2fm4y55' cannot be found
w3wp!webserver!6!08/06/2007-13:03:21:: e ERROR: Reporting Services error Microsoft.ReportingServices.Diagnostics.Utilities.ExecutionNotFoundException: Execution 'gn34sn55qxkdwi55k2fm4y55' cannot be found
at Microsoft.ReportingServices.WebServer.HttpClientRequest.InitForRequest(CatalogItemContext context, UserContext userCtx)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderReport(HttpResponseStreamFactory streamFactory)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.DoStreamedOperation(StreamedOperation operation)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderItem(ItemType itemType)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderPageContent()
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderPage()
w3wp!library!6!08/06/2007-13:03:53:: Call to ListParentsAction(http://DEV-ad-v2/mySites).
w3wp!library!6!08/06/2007-13:03:53:: Call to ListParentsAction(http://DEV-ad-v2/mySites).
w3wp!library!6!08/06/2007-13:03:54:: Call to ListChildrenAction(http://DEV-ad-v2/mySites, False).
w3wp!webserver!6!08/06/2007-13:03:55:: i INFO: Processed folder 'http://DEV-ad-v2/mySites'
w3wp!library!6!08/06/2007-13:04:12:: Call to GetPermissionsAction(http://DEV-ad-v2).
w3wp!library!6!08/06/2007-13:04:12:: Call to GetSystemPropertiesAction().
w3wp!library!6!08/06/2007-13:04:12:: Call to GetPermissionsAction(http://DEV-ad-v2/Test Reports/Report1.rdl).
w3wp!session!6!08/06/2007-13:04:23:: i INFO: LoadSnapshot: Item with session: s5oz5evzesse5cugbxxu1wy3, reportPath: http://DEV-ad-v2/Test Reports/Report1.rdl, userName: SHAREPOINTsystem not found in the database
w3wp!library!6!08/06/2007-13:04:23:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ExecutionNotFoundException: Execution 's5oz5evzesse5cugbxxu1wy3' cannot be found, ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.ExecutionNotFoundException: Execution 's5oz5evzesse5cugbxxu1wy3' cannot be found
w3wp!webserver!6!08/06/2007-13:04:23:: e ERROR: Reporting Services error Microsoft.ReportingServices.Diagnostics.Utilities.ExecutionNotFoundException: Execution 's5oz5evzesse5cugbxxu1wy3' cannot be found
at Microsoft.ReportingServices.WebServer.HttpClientRequest.InitForRequest(CatalogItemContext context, UserContext userCtx)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderReport(HttpResponseStreamFactory streamFactory)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.DoStreamedOperation(StreamedOperation operation)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderItem(ItemType itemType)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderPageContent()
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderPage()
w3wp!library!6!08/06/2007-13:09:54:: Call to GetPermissionsAction(http://DEV-ad-v2).
w3wp!library!6!08/06/2007-13:09:54:: Call to GetSystemPropertiesAction().
w3wp!library!6!08/06/2007-13:09:54:: Call to GetPermissionsAction(http://DEV-ad-v2/Test Reports/Report1.rdl).
w3wp!session!6!08/06/2007-13:09:57:: i INFO: LoadSnapshot: Item with session: ex2ubmetmr13vdffxciursfg, reportPath: http://DEV-ad-v2/Test Reports/Report1.rdl, userName: SHAREPOINTsystem not found in the database
w3wp!library!6!08/06/2007-13:09:57:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ExecutionNotFoundException: Execution 'ex2ubmetmr13vdffxciursfg' cannot be found, ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.ExecutionNotFoundException: Execution 'ex2ubmetmr13vdffxciursfg' cannot be found
w3wp!webserver!6!08/06/2007-13:09:57:: e ERROR: Reporting Services error Microsoft.ReportingServices.Diagnostics.Utilities.ExecutionNotFoundException: Execution 'ex2ubmetmr13vdffxciursfg' cannot be found
at Microsoft.ReportingServices.WebServer.HttpClientRequest.InitForRequest(CatalogItemContext context, UserContext userCtx)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderReport(HttpResponseStreamFactory streamFactory)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.DoStreamedOperation(StreamedOperation operation)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderItem(ItemType itemType)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderPageContent()
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderPage()
w3wp!library!6!8/6/2007-13:13:17:: i INFO: Cleaned 0 batch records, 0 policies, 2 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams


Thank you,

John

View 2 Replies View Related

Problem With Report Viewer , No Data Is Displayed And Report Comes Out As Empty

Dec 6, 2007

Hi ,

I have a problem using Report Viewer With SQL Reporting Services 2005.


I had a really weird issue with a ReportViewer. It would show the little green Loading progress bar image but it wouldnt show any data, just a white background where the output should be. I knew the data was there because exporting to Excel or PDF showed the data just fine.

The problem is report toolbar is display but NO DATA is displayed and the report comes out as EMPTY .


Thanks in advance..

Can you please help me out in resolving this problem.

View 18 Replies View Related

Passing Parameter To The Sql Server Report Using Report Viewer Control

Dec 29, 2006

Hi,

I want to give filtering criteria in my SSRS report.

I have drop down list control having list of Email's of clients.

So, how can i pass the value of the particular Email id in my SSRS report using Report Viewer control?

How can i pass user input as parameter in my report using visula studio 2005?



Thanx,

Ruja

View 1 Replies View Related

How To Pass Parameters From Report Viewer To Report Server

Mar 28, 2008

Hi,

I am having hard time in sending parameters to the report server through reportviewer control from my application. Could anybody help me on this issue?. Is there any way to send the parameters and also what kind of configuration do i need on my report project so that it can accept parameters from my application.


Thanks,

View 9 Replies View Related

Report Explorer And Report Viewer Webparts Not Working With New WSS 3.0

Jan 22, 2007

I just installed a fresh lab machine with WSS 3.0 and SQL 2005 SP1. I registered the RS web parts.

In the home page I added the Reports Explorer and the Report viewer web parts. I set up the Reports Explorer and the list of reports are showed.

When I connect the Report Viewer Web part to get report from the Report Explorer web part I get the maintenance WSS page. I have to delete the Report Viewer web part to have the page working again.

If I use only the Reports Viewer with a report (not connected to Reports Explorer) is working just fine.

Any ideas what could be the problem? Any hints on how to investigate this is also much appreciated.

Thanks,

Joe

View 1 Replies View Related

Proxy Rs 2005 - How To Use The ReportViewerWebControl.axd?

Mar 2, 2006

We have a reverse proxy for rs 2000 -> a client requests a report, it (the proxy) then goes out to the rs box, gets the report, encrypts any return urls and feeds the modified html to the requesting client. I understand this isn't necessary anymore with rs 2005 due to the architecture. Question is, when I use the ReportExecutionService.Render method it is still returning the parameters for the report, and not the ReportSession, ControlID, Controller, etc. parameters which hides the actual return values on the href links of the report.

Documentation is plentiful for rs 2005, but examples are not. Can someone please explain to me if using the new features in rs 2005 to hide the parameter values from the users is possible via web request? Making the parameter values completely and entirely (even via sniffer) is absolutely a must (which is why we are currently encrypting return URL's).

My code:

ReportExecutionService rs = new ReportExecutionService();
rs.Credentials = System.Net.CredentialCache.DefaultCredentials;
ParameterValue[] pvValues = null;
DataSourceCredentials[] credCredentials = null;
ReportParameter[] rptparamRequiredParams = null;
ParameterValue[] pvReportParameters = null;
ExecutionHeader execHeader = null;
ExecutionInfo execInfo = null;
rptparamRequiredParams = null;
string sHistoryID = null;

{fill parameters block}

rs.SetExecutionParameters (pvReportParameters, "en-us");

try
{
string extension;
string encoding;
string mimeType;
Warning[] warnings = null;
string[] streamIDs = null;
byte[] result = rs.Render (sFormat, sDeviceSettings, out extension, out mimeType, out encoding, out warnings, out streamIDs);
string d = System.Text.Encoding.ASCII.GetString(result, 0, result.Length);
HttpContext.Current.Response.Write (d);
}
catch
{
// do stuff
}

My code is returning:
http://henneseyjm1/ReportServer$sql2005?%2fJH.RSReporting%2fBAG&amp;cy_start_date=1%2f1%2f2006&amp;cy_end_date=3%2f1%2f2006&amp;region=RG20&amp;entity_num=nothing&amp;proc_ctr=nothing&amp;office_num=nothing&amp;render_format=htm&amp;view_name=standard&amp;group_id=0&amp;server_name=http%3a%2f%2flocalhost%2fJHnet%2f&amp;user_is_office=False&amp;rs%3aParameterLanguage=&amp;rc%3aParameters=Collapsed&amp;rc%3aToolbar=False

Where I would like it to return:
http://localhost/Reports$sql2005/Reserved.ReportViewerWebControl.axd?ReportSession=iyvsxg45vhzwd2acii3jj4q4&ControlID=de367546-919a-4f67-be4d-cd2747166dca&Culture=1033&UICulture=9&ReportStack=1&OpType=ReportArea&Controller=ClientControllerctl161&PageNumber=1&ZoomMode=Percent&ZoomPct=100&ReloadDocMap=true&EnableFindNext=False&LinkTarget=_top

View 1 Replies View Related

Execution Procedure Stored During Execution Of The Report .

Aug 3, 2007



Hello :

How to execute a procedure stored during execution of the report, that is before the poster the data.

Thnak you.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved