I'm trying to use SQL Server Everywhere with the Enterprise Library data access block. If I manually create a GenericDatabase using the SSev database provider it works fine, but I want to be able to use the DatabaseFactory.CreateDatabase method so it's all handled by the configuration in app.config.
When I do I get an exception. "Failed to find or load the registered .Net Framework Data Provider." within the ObjectBuilder code.
HI all,i want to log different activities of my application like (order approved, order rejected etc) to a sql database using Enterprise Library 2.0.can anyone help me by giving a link(step by step procedure for this).or explain how to create my own sample application to log some event to DB(by creating a new database and tables for this).Thanks in advance.regards,Jon.
We are expanding an application's database hardware to have a mirrored failover server. Normally in this case we just have the application add "Failover Partner=MirredServerName" in the connection string.
However, this application is using the Enterprise Library Data Access Block and we can't find any documentation describing how to setup the Failover Partner using this library. Any help would be appreciated.
I have downloaded Microsoft Enterprise Library 2005 from microsoft.com. I am trying implement Data Access Layer with visual studio 2003. I am able to access some functions of the DAL but I am not able to establish connection with SQL Server 2000.
Will anyone tell me the solution for the above issue.
I am trying to find a solution to my woes creating CLR activation stored procedure that references Enterprise library data access dlls. Does anyone know best practices to deploy .NET 2.0 assemblies as SQLCLR. I am using VS2005 SqlClrProject to deploy my .NET 2.0 assemblies to Sql Server and it fails with error such as "Assembly was not found in the sql catalog". If I manually try to load a referenced assembly within SqlServer by browsing to the target location, like for example, System.Management.dll it fails with similar error, trying to resolve its dependencies. Even if I manage to walk through the dependency tree and resolve it to the final dependent dll, I am only able to load it in "UNSAFE" mode. Any recommendations, suggestions and feedback are welcome.
This is my code... public partial class test : System.Web.UI.Page {protected void Page_Load(object sender, EventArgs e) {SqlDatabase database = (SqlDatabase)DatabaseFactory.CreateDatabase("ConnectionString");DbCommand command = database.GetSqlStringCommand("SELECT UserName FROM Users WHERE UserID = '6264'"); using (IDataReader reader = database.ExecuteReader(command)) {if (reader.Read()) {lblTest.Text = "test"; } } } }
This is my error: Server Error in '/' Application.
Timeout expired. The timeout period elapsed prior to obtaining a connection from the pool. This may have occurred because all pooled connections were in use and max pool size was reached. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.InvalidOperationException: Timeout expired. The timeout period elapsed prior to obtaining a connection from the pool. This may have occurred because all pooled connections were in use and max pool size was reached.Source Error:
Line 21: //DbCommand command = database.GetStoredProcCommand("CorrUsers_GetByUserId_s"); Line 22: DbCommand command = database.GetSqlStringCommand("SELECT UserName FROM Users WHERE UserID = '6264'"); Line 23: database.ExecuteReader(command); Line 24: using (IDataReader reader = database.ExecuteReader(command)) Line 25: {Source File: d:webwwwrootchacha078dev.cha.toplingo.com est.aspx.cs Line: 23 Stack Trace:
[InvalidOperationException: Timeout expired. The timeout period elapsed prior to obtaining a connection from the pool. This may have occurred because all pooled connections were in use and max pool size was reached.] System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +1261381 System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105 System.Data.SqlClient.SqlConnection.Open() +111 Microsoft.Practices.EnterpriseLibrary.Data.Database.GetNewOpenConnection() +195 Microsoft.Practices.EnterpriseLibrary.Data.Database.GetOpenConnection(Boolean disposeInnerConnection) +106 Microsoft.Practices.EnterpriseLibrary.Data.Database.ExecuteReader(DbCommand command) +62 test.Page_Load(Object sender, EventArgs e) in d:webwwwrootchacha078dev.cha.toplingo.com est.aspx.cs:23 System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +15 System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +33 System.Web.UI.Control.OnLoad(EventArgs e) +99 System.Web.UI.Control.LoadRecursive() +47 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1436
Any help with this matter would be very much appreciated. Thank you for your time. Sincerely, Jeffrey Pham
I have installed SSEv runtime and VS2005 SP1 but I can't make a connection to SQL Everywhere in Server Explorer. When I Add Connection I don't see Everwhere or Mobile in the list of Data Sources. Is there any way to make this work? Is there a different client for creating databases?
Can someone on the team tell me if a delete or update orphans a row in the SQL Server Everywhere database that must be compacted out to free the space? I understand that Compact runs automatically when the last connection is closed but does this create another copy of the database as it does with JET or is this an update-in-place. Is this an opportunity to corrupt the database if the process is interrupted by power-failure or a truck running over the device from right-to-left?
Hi! When I use dbrpcparam to add empty string as a parameter to a stored prosedure, as a result I have NULL, but I need to get an empty string. It seems to me the DB library for C does not allow to pass an empty string as a parameter of a stored procedure. It gets converted to NULL. ?? Do you know how I can avoid the problem? Thank you. Anny.
I am porting the proC programs from Oracle to C on windows. Does anybody know that If I am using DB library for C, does it support the dynamic binding of the table and conditions like Oracle`s embedded sql ( 4th method?)
ex: select unknown columns from unknown tables where unknown colum= unknown value
We are looking for an ETL library or callable application that wouldallow us to transfer and transform data between platforms but mainlyinto a SQL server database. We would be calling this tool fromjavascript programs. Is there something out there in the midrangeprice-wise? So far I am finding just high-end ETL tools that are alittle over kill for us.Thanks.
This is not an actual question but more of a topic that I cannot find any information on and that may be because there is nothing about it.Basicly is there any SQL Database Table Libraries out there?......For instance I am creating a tedious database table right now which includes the names of all the countires (around 200 ) its simply used for a registration process where a users country information gets saved in the database...Since the worlds country names do not get changed very much is there a sql database table out there thats pre-made so I dont have to sit here and enter in all 200 or so countries by hand?....this is what I mean by database table libraries, it can basicly include all common things a website may use like a province/state dropdown list (pre-made database table), the worlds countries (again pre-made database table) and so on....If someone can come to my rescue and help me find some information on this it would be great cause well It's probably going to take a bit to enter in every country name, then the same for all the provinces/states, then bind them somewhat so when a user clicks on canada the provinces/states for canada are only avalible in the next list.Thank You All.Adam
I have been receiving the following error when I look into the NT error log and I am not sure what it is referring to. First thing that happens is that I receive an error that my Open Objects may be too low and then the following error: DB-LIBRARY error - SQL Server connection timed out. The source listed is SQLCTR60.
Hi, I have the following problem: Anytime I`m starting the PC, the following message appears: "SQLDUMPER library failed to initialize.....TRY TO RE-INSTALL THE FILE" Could anyone help me deal with this? What should I do? thank you, Enno
Does anyone know if this SQL is part of MS Office or is it XP... I haven't figured that out. It says reinstall the program but doesn't say what program. I know I never intentionally installed an SQL program. At this time I get the same message as everyone seems to be getting - SQL Dumper Library failed... reinstall .... The problem for me started when I added Office 2007 and added the business contacts program. Any ideas are appreciated!
when i start up my computer it displays the message sqldumper library failed initialization. your installation is either corrupt or has been tampered with. uninstall then rerun setup. what do i do?
I have an application running on win 95/98 m/c which connects to SQl Server 6.5 Server on NT 4.0. From some of the client m/c i get an error message - 'DB-Library network Communications layer not loaded'. But from this client i am able to log on and use the enterprise manager. What could be the problem and how to resolve it ? Thanks.
I have encountered a problem doing an update on a Field defined as DECIMAL with dbcursor().
I have opened a cursor with dbcursoropen() with option LOCK_CC set. Then I have bound some char variables to CHAR Fields with STRINGBIND and some double Variables to the DECIMAL fields with FLT8BIND.
When I read the cursor, the data is correct in the bound variables. But when I do an update, all data for the numeric fields are gone and the database contains only NULL Values. The Strings are updated correctly.
I have tried to set the length, I am using the poutlen-variables with a value other than 0, but nothing helps.
I'm wondering if it's possible to see which library which a spid is using? For example, is the spid coming from a jdbc connection, or an odbc connection?
The In-row data RSVD page count for object "PermitSlots", index ID 0, partition ID 31139347693568, alloc unit ID 31139347693568 (type In-row data) is incorrect. Run DBCC UPDATEUSAGE
Hi, I received the following message after a DBCC run. This was fixed by a DBCC UpdateUsage. The question is, is there a reference where I can find details on errors as the above and their causes (other than Googling it or posting to a forum)?
Thanks
Drew --------------------- "It's Saturday night; I've got no date, a two litre bottle of Shasta, and my all-Rush mix tape... LET'S ROCK."
Hi guys,Sounds a bit strange, however, if we could put some calculation instored procedure it would be quite convenient, just... where can I finda REGEXP library for matching checking? thanks.yours,athos
This is addressed to the SSIS team. I have found COM objects registration bug. The SQLTaskConnections.dll library has a couple of COM objects registered with invalid TypeLib element. If you search for GUID:
EF6D5D2C-8F86-4DBE-90F9-0B289E9577C3
You will find it in a couple of COM objects, but there is no such TypeLib registered. The correct TypeLib GUID should be:
E8E2265A-7E92-486C-AC8F-5ECC9B22F7CA
which I retrieved from the .tlb inside the library.
I'm getting the error: Could not load file or assembly 'Microsoft.SqlServer.SQLTaskConnectionsWrap, Version=9.3.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. The system cannot find the file specified.
and I think it can be related. I have read somewhere that Microsoft has recently changed the way .NET Runtime-Callawable-Wrappers are dealing with COM objects and it is quite possible this update has broken libraries like this.
Can you please someone forward this to the appropriate person responsible.
I´m wondering if is it possible to use the SSIS Class Library without SQLServer installed in the machine or if is it necessary to install SLQ Server in order to use SSIS objects?
Hi gurus, I have an application developed with VC++ 6.0 and communicating with SQL Server 2000 through DB-Library e.g. dblogin stuff. With the release of SQL Server 2005, I don't find any DB-Library, every one is talking about Native Client to access SQL Server 2005. Native Client uses OLEDB or ODBC to access database. Could someone help me, is there any DB-Library support available for SQL Server 2005.
Is it just me and the strange web browser I use (IE 4.01 SP 1 on NT) or is it impossible to download any of the scripts in the script library on SWYNK?
There are some really useful sounding utilities on there, if I didn't get 'downloaded file not available' whenever I tried to access them.
Hi!! If I have declared a variable, such as char variable_name[x], and have assigned it a value, how do I go about passing this value to an SQL query such as: SELECT * FROM variable_name where my value replaces variable_name. Cheers, Marc
I am running sqlserver 6.5 and I trying to copy over one db into another, it goes thru the scripting and then it gives me the error message Error 10004 [DB-Library] unable to connect. How can I resolve this?
I was reading that Net-Library Encryption is an SSL utility. Does thatmean the traffic uses TCP port 443 or does it still use TCP 1433?Thanks.http://msdn.microsoft.com/library/d..._ar_cs_6fu6.asp
