SUM Of One Column To Multiple Columns Based On Another Column Value
Oct 14, 2015
LeaveEntitlementID PeriodID LeaveType EmployeeID NumberOfDays
1 1 Annual 1 10
2 1 Annual 1 10
3 1 Sick 2 10
4 2 Sick 2 10
5 2 Sick 2 10
I have the above table (LeaveEntitlement) which has the above columns.
What I want to sum the column NumberOfDays based on EmployeeID, LeaveType and PeriodID columns as of LeaveTypeNumberOfDays.
For example sum(NumberOfDays) where PeriodID=1 and EmployeeID=1 and LeaveType=Annual
The result should be shown in new column name AnnualLeave (20)
sum(NumberOfDays) where PeriodID=1 and EmployeeID=1 and LeaveType=Sick
The result should be shown in new column name SickLeave (10)
Same all leave Types
The table should be shown as the below after executing the query
LeaveEntitlementID PeriodID EmployeeID AnnualLeave SickLeave
1 1 1 20 0
2 1 2 0 10
3 2 2 0 20
is it possible in sql server
View 8 Replies
ADVERTISEMENT
Jul 31, 2015
I have a table #vert where I have value column. This data needs to be updated into two channel columns in #hori table based on channel number in #vert table.
CREATE TABLE #Vert (FILTER VARCHAR(3), CHANNEL TINYINT, VALUE TINYINT)
INSERT #Vert Values('ABC', 1, 22),('ABC', 2, 32),('BBC', 1, 12),('BBC', 2, 23),('CAB', 1, 33),('CAB', 2, 44) -- COMBINATION OF FILTER AND CHANNEL IS UNIQUE
CREATE TABLE #Hori (FILTER VARCHAR(3), CHANNEL1 TINYINT, CHANNEL2 TINYINT)
INSERT #Hori Values ('ABC', NULL, NULL),('BBC', NULL, NULL),('CAB', NULL, NULL) -- FILTER IS UNIQUE IN #HORI TABLE
One way to achieve this is to write two update statements. After update, the output you see is my desired output
UPDATE H
SET CHANNEL1= VALUE
FROM #Hori H JOIN #Vert V ON V.FILTER=H.FILTER
WHERE V.CHANNEL=1 -- updates only channel1
UPDATE H
SET CHANNEL2= VALUE
FROM #Hori H JOIN #Vert V ON V.FILTER=H.FILTER
WHERE V.CHANNEL=2 -- updates only channel2
SELECT * FROM #Hori -- this is desired output
my channels number grows in #vert table like 1,2,3,4...and so Channel3, Channel4....so on in #hori table. So I cannot keep writing too many update statements. One other way is to pivot #vert table and do single update into #hori table.
View 5 Replies
View Related
Jul 28, 2015
I have a excel file which has a column called "Code" and their values are A,B,C,D,E,F,G,H. I want to create a new column called "status" based on the values of "Code".
Code:
A
B
C
D
E
F
G
H
If A,C,E,G then "status" = "Active" else if B,D,F,H then "Status" = "Inactive". I like to do it using "Derived Column".
View 4 Replies
View Related
Sep 10, 2014
I’m trying to figure out a way to sum columns for similar IDs, based on the contents of a single field. For example, if I’m calculating attendance percentages for students, and codes P and T count as Present, and codes A and E count as Absent, I would want to total Present and Absent codes separately, in their own columns. I would then like to use those totals to calculate percentage, but I can do that. It’s the SUM based on column value (by ID) that is giving issue.
If I have the following view:
IDLNFNCDTotal
123456MearsBenP12
123456MearsBenA2
123456MearsBenT6
234567NortonSusanP15
234567NortonSusanA2
234567NortonSusanT2
234567NortonSusanE1
I would like something like this:
IDLNFNPresentAbsentPercentage
123456MearsBen18290.0
234567NortonSusan17385.0
I’ve been playing around with nested queries, but nothing’s working. This is a glimpse of the mess that I’ve created trying to sort this out. Many errors.
I just noticed that I used a simpler example than the SQL I included, so I modified it a bit. There are additional fields that I'll need to include, but I want to get the logic working correctly. From there, I can handle the rest. So here's a more appropriate code example showing the direction I'm trying to go with this.
SELECT ID, [Last Name], [First Name], CD, Present, Absent, CAST(LEFT(Present / (Absent + Present) * 100, 5) AS varchar) + '%' AS Percentage
FROM (SELECT ID, CD, TotalAHD, CAST
((SELECT SUM(TotalAHD) AS Expr1
FROM SumAHDforAttndPercentages AS p
[Code] ...
View 2 Replies
View Related
Mar 3, 2008
Please can anyone help me for the following?
I want to merge multiple rows (eg. 3rows) into a single row with multip columns.
for eg:
data
Date Shift Reading
01-MAR-08 1 879.880
01-MAR-08 2 854.858
01-MAR-08 3 833.836
02-MAR-08 1 809.810
02-MAR-08 2 785.784
02-MAR-08 3 761.760
i want output for the above as:
Date Shift1 Shift2 Shift3
01-MAR-08 879.880 854.858 833.836
02-MAR-08 809.810 785.784 761.760
Please help me.
View 8 Replies
View Related
Oct 31, 2014
‘Trying to SELECT INTO a new table all columns of a table based on a DISTINCT value of one column so for example:
SELECT *
INTO new_table
FROM old_name
WHERE old_table.column IS DISTINCT’
View 4 Replies
View Related
Aug 22, 2007
Hi,
I have multiple columns in a Single Table and i want to search values in different columns. My table structure is
col1 (identity PK)
col2 (varchar(max))
col3 (varchar(max))
I have created a single FULLTEXT on col2 & col3.
suppose i want to search col2='engine' and col3='toyota' i write query as
SELECT
TBL.col2,TBL.col3
FROM
TBL
INNER JOIN
CONTAINSTABLE(TBL,col2,'engine') TBL1
ON
TBL.col1=TBL1.[key]
INNER JOIN
CONTAINSTABLE(TBL,col3,'toyota') TBL2
ON
TBL.col1=TBL2.[key]
Every thing works well if database is small. But now i have 20 million records in my database. Taking an exmaple there are 5million record with col2='engine' and only 1 record with col3='toyota', it take substantial time to find 1 record.
I was thinking this i can address this issue if i merge both columns in a Single column, but i cannot figure out what format i save it in single column that i can use query to extract correct information.
for e.g.;
i was thinking to concatinate both fields like
col4= ABengineBA + ABBToyotaBBA
and in search i use
SELECT
TBL.col4
FROM
TBL
INNER JOIN
CONTAINSTABLE(TBL,col4,' "ABengineBA" AND "ABBToyotaBBA"') TBL1
ON
TBL.col1=TBL1.[key]
Result = 1 row
But it don't work in following scenario
col4= ABengineBA + ABBCorola ToyotaBBA
SELECT
TBL.col4
FROM
TBL
INNER JOIN
CONTAINSTABLE(TBL,col4,' "ABengineBA" AND "ABB*ToyotaBBA"') TBL1
ON
TBL.col1=TBL1.[key]
Result=0 Row
Any idea how i can write second query to get result?
View 1 Replies
View Related
Jun 4, 2014
I am trying to pivot data based on columns value in year column... but results are not showing up correctly. I want to see all columns after pivot.I want to Pivot based on year shown in the data but it can be dynamic as year can go for last 3 years
I am also using an inner join as i have two amount columns in my code and i want to show both amount columns for all displayed year.I am able to pivot but I need in output all the columns like this Id,MainDate, Year1,Year2,Year3(if any), AMT1 for YR1, AMT2 for Yr1, , AMT1 for YR2, AMT2 for Yr2, AMT1 for YR3, AMT2 for Yr3,
Here is some data:
-- CREATE TABLE [dbo].[TEMP](
--[FileType] [varchar](19) NOT NULL,
--[dType] [char](2) NOT NULL,
--[dVersion] [char](2) NOT NULL,
--[Id] [char](25) NOT NULL,
--[MainDate] [char](40) NULL,
[code]....
View 5 Replies
View Related
Sep 3, 2014
I have data:
Ticket User Priority
A ME 1
B ME 1
C ME 2
C ME 3
D ME 2
E YOU 2
F YOU 1
G ME 3
H YOU 2
H YOU 3
I ME 1
Essentially if Ticket and User are the same I just want the min priority returned.
SO:
Ticket User Priority
A ME 1
B ME 1
C ME 2
D ME 2
E YOU 2
F YOU 1
G ME 3
H YOU 2
I ME 1
I've tried partition and rank but can't get it to return the right output.
View 5 Replies
View Related
Nov 25, 2015
I have 3 different companies that share the same ticket_types(CRMS System). I need to display the Ticket Types and the 3 company's Ticket Count:
Ticket Type | Company A Count | Company B Count | Company C Count
I can get the information individually for each company, but if a company doesn't have a ticket in one of the ticket_types, then it isn't displayed in a row. So, I tried to write the following, which isn't pulling back any data.
DECLARE @startdate date = '20150306'
DECLARE @enddate date = '20151031'
DECLARE @AcctGrp varchar(20) = '111'
;WITH TType
AS
(
SELECT ctp.description as TicketType
[Code] .....
If I run each SELECT individually from above (excluding the last SELECT), it works and I get the following:
TicketType
AR Request Credit
Availability/Rush
Cancel Order
Credit Card Payment
Expedite Order
Freight Quote
[Code] ...
How to get the query results? Am I even close to getting it right?
View 3 Replies
View Related
Sep 6, 2011
I have a table with two columns refid and name and it has the following values
1 tom
1 jim
2 bob
1 bob
I need a resultset that would have the following values
1 tom, jim, bob
2 bob
I have tried couple of things one being:
DECLARE @namelist VARCHAR(1000)
SELECT @namelist = COALESCE(@namelist +', ' ,'') + name FROM sales where refid = 1
SELECT @namelist
But I am looking for a resultset with a unique refid and all the names comma separated for that refid.
View 2 Replies
View Related
Sep 5, 2014
I need to split a row into multiple rows based on multiple column values.
time_id = 111
employee_id = 222
time_in = 10:00
time_out = 16:00
break1_in = 12:00
break1_out = 13:00
break2_in = 14:00
break2_out = 15:00
I would like to break this into multiple time_in/time_out based on if they have breaks. Breaks are not required and will come across blank if non are taken.
row 1
time_in 10:00
time_out 12:00
row 2
time_in 13:00
time_out 14:00
row 3
time_in 15:00
time_out 16:00
View 2 Replies
View Related
Sep 2, 2015
Below is the SQL Query i am currently having
SELECT IG_FinancialTransactionSummary.ClaimNum,IG_FinancialTransactionSummary.TransactionCode,
IG_FinancialTransactionSummary.TransactionDate,IG_FinancialTransactionSummary.Username,
FinancialTransactionSummaryTest.ClaimNum,FinancialTransactionSummaryTest.TransactionAmount,
FinancialTransactionSummaryTest.UserName--,FinancialTransactionSummaryTest.TransactionDate
[Code] ....
And here is the result dataset
ClaimNumTransactionDateUsername ClaimNum TransactionAmountUserName
2000074 20150209jerry.witt 2000074 -10000DATAFIX INSERTED ON 20150626 AT 162152493 LOCAL
2000074 20150626DATAFIX INSERTED ON 20150626 AT 162152493 LOCAL 2000074 -10000DATAFIX INSERTED ON 20150626 AT 162152493 LOCAL
[Code] .....
So,if we look at the result set, we notice 2 conditions where the IG_FinancialTransactionSummary.Username is like 'Data' and if we see the transaction date then sometimes that is the max transaction date or sometimes there are transactions that happened after but that doesn't have like '%data%' in username . So, i need to add a new column to my sql query which should basically verify if the username is like '%data%' and if that is the max(transaction date) or even if there are any transactions after that doesn't have like '%data%' then YES else No.
View 13 Replies
View Related
Feb 26, 2015
I am using CROSS APPLY instead of UNPIVOT to unpivot > one column. I am wondering if I can dynamically replace column names based on different tables? The example code that I have working is based on the "Allergy" table. I have thirty more specialty tables to go. I'll show the working code first, then an example of another table's columns to show differences:
select [uplift specialty], [member po],[practice unit name], [final nomination status]
,[final uplift status], [final rank], [final uplift percentage]
,practiceID=row_number() over (partition by [practice unit name] order by Metricname)
,metricname,Metricvalue, metricpercentilerank
[code]....
Rheumatology Table:The columns that vary start with "GDR" and [GDR Percentile Rank] so I'm just showing those:
GDR (nvarchar(255), null)
GDR Percentile Rank (nvarchar(255), null)
GDR PGS (nvarchar(255), null)
GDR Rank Number (nvarchar(255), null)
PMPM (nvarchar(255), null)
[Code] ....
These are imported from an Excel Workbook so that's why all the columns with spaces for now.
View 9 Replies
View Related
Aug 7, 2007
Hello all. I hope someone can offer me some help. I'm trying to construct a SQL statement that will be run on a Dataset that I have. The trick is that there are many conditions that can apply. I'll describe my situation:
I have about 1700 records in a datatable titled "AISC_Shapes_Table" with 49 columns. What I would like to do is allow the user of my VB application to 'create' a custom query (i.e. advanced search). For now, I'll just discuss two columns; The Section Label titled "AISC_MANUAL_LABEL" and the Weight column "W". The data appears in the following manner:
(AISC_Shapes_Table)
AISC_MANUAL_LABEL W
W44x300 300
W42x200 200
(and so on)
WT22x150 150
WT21x100 100
(and so on)
MT12.5x12.4 12.4
MT12x10 10
(etc.)
I have a listbox which users can select MULTIPLE "Manual Labels" or shapes. They then select a property (W for weight, in this case) and a limitation (greater than a value, less than a value, or between two values). From all this, I create a custom Query string or filter to apply to my BindingSource.Filter method. However I have to use the % wildcard to deal with exceptions. If the user only wants W shapes, I use "...LIKE 'W%'" and "...NOT LIKE 'WT%" to be sure to select ONLY W shapes and no WT's. The problems arises, however, when the user wants multiple shapes in general. If I want to select all the "AISC_MANUAL_LABEL" values with W <= 40, I can't do it. An example of a statement I tried to use to select WT% Labels and MT% labels with weight (W)<=100 is:
Code SnippetSELECT AISC_MANUAL_LABEL, W
FROM AISC_Shape_Table
WHERE (W <= 100) AND ((AISC_MANUAL_LABEL LIKE 'MT%') AND (AISC_MANUAL_LABEL LIKE 'WT%'))
It returns a NULL value to me, which i know is NOT because no such values exist. So, I further investigated and tried to use a subquery seeing if IN, ANY, or ALL would work, but to no avail. Can anyone offer up any suggestions? I know that if I can get an example of ONE of them to work, then I'll easily be able to apply it to all of my cases. Otherwise, am I just going about this the hard way or is it even possible? Please, ANY suggestions will help. Thank you in advance.
Regards,
Steve G.
View 4 Replies
View Related
May 15, 2015
I have a query running and returning 3 columns, user name, e-mail and device name
SELECT DISTINCT v_R_User.Full_User_Name0 AS 'User full Name', v_R_User.Mail0 AS 'E-Mail', _RES_COLL_DEV00144.Name
FROM v_R_System INNER JOIN
v_R_User ON v_R_System.User_Name0 = v_R_User.User_Name0 INNER JOIN
_RES_COLL_DEV00144 ON v_R_User.User_Name0 = _RES_COLL_DEV00144.UserName INNER JOIN
v_GS_COMPUTER_SYSTEM ON v_R_System.ResourceID = v_GS_COMPUTER_SYSTEM.ResourceID
Where v_R_User.Mail0 <> ''
ORDER BY 'User Full Name'
From here I would like to generate an e-mail to each user (like mail merge) to each user in the table an include their machine name. I can do it with PS, but rather have it run directly from SQL. Is it possible?
View 9 Replies
View Related
Jan 28, 2008
Hi all,
I have a requirement like this ,
I have Address Column.It is containing data like Mr. K KK Tank Guntur Jal Bhavan, Univercity Road, Rajkot 9843563469
I have to split this into 3 more columns like(Address1,name,phoneno)--
Means i have 4 columns including Address Column.(Address,Address1,name,phoneno)
Example:
Address:Rajkot
Address1:Univercity Road
Name:Mr. K KK Tank Guntur Jal Bhavan
PhoneNO:9843563469
How can i acheive this one with out data lose in Address Column.
Thanks in advance.
View 2 Replies
View Related
Feb 5, 2008
My first ASP.NET/SQL project. I'm creating an Asset Management DB. I wish to view the Asset number, the full name of the user it's assigned to and the Make and Model of each record in the DB. However assets are split into different categories e.g. monitors, PCs, Preinters etc. and they are all in different tables. The SQL below displays the asset number, Name of person assigned and the model of the asset.
SELECT Hardware.AssetNo, [User].FullName, MonitorModel.Model, PCModel.Model AS Expr1, PrinterModel.Model AS Expr2
FROM Hardware INNER JOIN
[User] ON Hardware.UserID = [User].UserID INNER JOIN
Model ON Hardware.ModelID = Model.ModelID LEFT OUTER JOIN
MonitorModel ON Model.MonitorModelID = MonitorModel.MonitorModelID LEFT OUTER JOIN
PCModel ON Model.PCModelID = PCModel.PCModelID LEFT OUTER JOIN
PrinterModel ON Model.PrinterModelID = PrinterModel.PrinterModelID
This outputs:-
Asset number FullName Model Expr1 Expr2
00000 User Name Model NULL NULL
00001 User Name NULL Model NULL
00002 User Name NULL NULL Model
However what i hope to acheive is output Model, Expr1, Expr2 into one column like so:-
Asset number FullName Model
00000 User Name Model
Can i do this in the SQL or do i have to do it in my ASP.NET (VB) Page?
Using VSWD 2005 Ex Edition and SQL Server 2005 Ex Edition
Thank you for your replies
View 4 Replies
View Related
Jun 10, 2014
I have to split a column using comma a delimiter into multiple columns. I am able to do it if i know how many column will be present in the final output. But in daily run, the columns may vary randomly.
how to split columns without hardcoding how many columns it ll come.
This is the code am using
Code:
WITH Split_Names (Fil_id,Name, xmlname)
AS
(
SELECT Fil_ID,
[Code].....
View 8 Replies
View Related
Apr 28, 2014
I have 1 column (memberassignment_1) that has the string in it - Port=A; Code=B; Sfx=C; Name=D; Night=E; Sig_Grp=F
I want to split this into 6 columns - Port, Code, sfx, Name, Night, Sig_Grp
EXAMPLE
PORT CODE SFX NAME NIGHT SIG_GRP
A B C D E F
View 11 Replies
View Related
Feb 24, 2008
How do I create a select query which returns multiple columns from one actual DB column?
DB structure
ID (int), photo (nvarchar(50)), name (nvarchar(50))
Sample data
1, 'photo1.jpg', 'john smith'
2, 'photo2.jpg', 'jane doe'
3, 'photo3.jpg', 'bob brown'
4, 'photo4.jpg', 'mary brown'
5, 'photo5.jpg', 'sue smith'
6, 'photo6.jpg', 'bob rogers'
...
Required output
pic_col_1, name_col_1, pic_col_2, name_col_2, pic_col_3, name_col_3
photo1.jpg, john smith, photo2.jpg, jane doe, photo3.jpg, bob brown
photo4.jpg, mary brown, photo5.jpg, sue smith, photo6.jpg, bob rogers
Normally, I would just query the data and have the client data loop over the dataset to create the required output, however in this application it is not an option...
Thanks,
Steve
View 3 Replies
View Related
Mar 4, 2008
I have a table which has single column like this.
REP5426 02-28-08 0592 00100028 CAFE 00205415 23.77 A O INPUT
REP5426 02-28-08 0592 00100028 CAFE 00580910 475.58 A O INPUT
REP5426 02-28-08 0592 00100028 CAFE 00800840 -13.32 A O INPUT
REP5426 02-28-08 0592 00100028 CAFE 00205416 23.77 A O INPUT
I want to put this in a new table in individual columns
Col1 col2 col3 col4 col5 col6 col7 col8 col9
REP5426 02-28-08 0592 00100028 CAFE 00205415 23.77 A O INPUT
REP5426 02-28-08 0592 00100028 CAFE 00580910 475.58 A O INPUT
REP5426 02-28-08 0592 00100028 CAFE 00800840 -13.32 A O INPUT
REP5426 02-28-08 0592 00100028 CAFE 00205416 23.77 A O INPUT
How to do this.
Thanks.
View 2 Replies
View Related
Jun 4, 2015
I have a requirements to make a single column using a date from multiple columns. below my DDL and sample.
Create table #Mainsample
(ItemNum nvarchar(35), ItemDate datetime, OPType int)
Insert into #Mainsample(ItemNum,ItemDate, OPType) values ('M9000000000020510095','2015-05-01 18:38:48.840',5)
Insert into #Mainsample(ItemNum,ItemDate, OPType) values ('M9000000000020510094','2015-05-02 20:38:40.850',5)
Insert into #Mainsample(ItemNum,ItemDate, OPType) values ('M9000000000020510092','2015-05-02 21:40:42.830',5)
Insert into #Mainsample(ItemNum,ItemDate, OPType) values ('353852061764483','2015-05-02 09:25:10.800',5)
[code]....
View 10 Replies
View Related
Mar 9, 2008
I have FirstName,LastName columns in the database.I need to return FirstName,LastName as Name to client(as a single column).
View 3 Replies
View Related
Jan 30, 2015
Deciding whether or not to use a CTE or this simple faster approach utilizing system tables, hijacking them.
SELECT s.ORDER_NUMBER, s.PRODUCT_ID, 1 AS QTY, s.VALUE/s.QTY AS VALUE
FROM @SPLITROW s
INNER JOIN master.dbo.spt_values t ON t.type='P'
AND t.number BETWEEN 1 AND s.QTY
Just wanted to know if its okay to use system tables in a production environment and if there are any pit falls of using them ?
View 1 Replies
View Related
Jun 2, 2015
I have a table that is used to build rules. The rules point to other columns in other tables and usually contain only one value (i.e. ABC). But one of the options is to add a comma-separated list of SSNs (i.e. 123123123,012012012,112231122). I am trying to build a single query that allows me to leverage that list to get multiple rows from another table.
This obviously works:
SELECT * FROM vw_Person_Profile P (NOLOCK)
WHERE P.PrsnPIISSN_Chr IN ('123123123','012012012','112231122')
But this does not:
SELECT * FROM vw_Person_Profile P (NOLOCK)
WHERE P.PrsnPIISSN_Chr IN (
SELECT '''' + REPLACE(CONVERT(VARCHAR(4000),txtFieldValue), ',', ''',''') + ''''
FROM MassProcessing_Rules PR
WHERE PR.intRuleID = 10
)
View 5 Replies
View Related
Jun 13, 2008
I'm working on a sales commission report that will show commissions for up to 5 sales reps for each invoice. The invoice detail table contains separate columns for the commission rates payable to each rep, but for some reason the sale srep IDs are combined into one column. The salesrep column may contain null, a single sales rep id, or up to five slaes rep IDs separated by the '~' character.
So I'd like to parse the rep IDs from a single column (salesreplist) in my invoice detail table (below) to multiple columns (RepID1, RepID2, RepID3, RepID4,RepID5) in a temp table so I can more easily calculate the commission amounts for each invoice and sales rep.
Here is my table:
CREATE TABLE invcdtl(
invoicenum int,
salesreplist [text] NULL,
reprate1 int NULL,
reprate2 int NULL,
reprate3 int NULL,
reprate4 int NULL,
reprate5 int NULL,
)
Here is some sample data:
1 A 0 0 0 0 0
2 0 0 0 0 0
3 I~~~~ 15 0 0 0 0
4 A~B 5 5 0 0 0
5 I~F~T~K~G 5 5 2 2 2
6 A~B
As you can see, some records have trailing delimiters but some don't. This may be a result of the application's behavior when multiple reps are entered then removed from an invoice. One thing for sure is that when there are multiple reps, the IDs are always separated by '~'
Can anyone suggest a solution?
View 3 Replies
View Related
Aug 31, 2007
When quering a table with given criteria, For ex:
select notes, jobid, caller from contact where status in (6) and jobid = 173
I am getting this:
This job will be posted to Monster for 2 weeks. 173 906
Waiting for full budget approval 173 906
TUrns out we're uppin 173 906
What should I do so that these three columns for the same jobid from the same caller appears in only one column, either separated by a comma or semicolon?
Please HELP!!!!!
View 4 Replies
View Related
Oct 8, 2007
Suppose that I have a table with following values
Table1
Col1 Col2 Col3
-----------------------------------------------------------
P3456 C935876 T675
P5555 C678909 T8888
And the outcome that I want is:
CombinedValues(ColumnName)
----------------------------------------------
P3456 - C935876 - T675
P5555 - C678909 - T8888
where CombinedValues column contains values of coulmn 1,2 & 3 seperated by '-'
So is there any way to achieve this?
View 1 Replies
View Related
Oct 18, 2007
Hi!
I am designing a dimension table which will include a short name column based on the (full) name column. For example say Product dimension where I will have ProductName and ProductShortName. ProductShortName will be the first 6 characters of ProductName. I could populate ProductShortName using:
Substring in the select when I select from the original system, e.g. SUBSTR(PRODUCT_NAME, 1, 6) AS ProductShortName
Create a derived column in the SSIS flow which does the same thing
Create the ProductShortName column as a computed column which uses substring on ProductName
Create a trigger that populates ProductShortName based on ProductName when a row is inserted or updated
Create a named calculation in the table in the Analysis Services project's data source view
Create a named query in the Analysis Services project's data source view
I usually use 1, and 5 or 6 would only be used if I only will create reports against the cubes. 3 seems easiest to maintain, so I am thinking about using that one, but maybe it is slow for the data flow as I imagine it must be something like using 4, or when is the column "created" at runtime, i.e. when the table is queried?
Which approach(es) do or would you use? Pros and cons?
Thanks!
View 3 Replies
View Related
Aug 14, 2012
I have a table with a string value, where all values are seperated by a space/blank. I now want to use SQL to split all the values and insert them into a different table, which then later will result in deleting the old table, as soon as I got all values out from it.
Old Table:
Code:
ID, StringValue
New Table:
Code:
ID, Value1, Value2
Do note: Value1 is INT, Value2 is of nvarchar, hence Value2 can contain spaces... I just need to split on the FIRST space, then convert index[0] to int, and store index[1] as it is.
I can split on all spaces and just Select them all and add them like so: SELECT t.val1 + ' ' + t.val2... If I cant find the first space that is... I mean, first 2-10 characters in the string can be integer, but does not have to be.Shall probably do it in code instead of SQL?Now I want to run a query that selects the StringValue from OldTable, splits the string by ' ' (a blank) and then inserts them into New Table.
Code:
SELECT CASE CHARINDEX(' ', OldTable.stringvalue, 1)
WHEN 0 THEN OldTable.stringvalue
ELSE SUBSTRING(OldTable.stringvalue, 1, CHARINDEX(' ', OldTable.stringvalue, 1) - 1)
END
AS FirstWord
FROM OldTable
Found an example using strange things like CHARINDEX..But issue still remains, because the first word is of integer, or it does not have to be...If it isn't, there is not "first value", and the whole string shall be passed into "value2".How to detect if the very first character is of integer type?
Code:
@declare firstDigit int
IF ISNUMERIC(SUBSTRING(@postal,2,1) AS int) = 1
set @firstDigit = CAST(SUBSTRING(@postal,2,1) AS int)
ELSE
set @firstDigit = -1
[code]....
View 2 Replies
View Related
Mar 3, 2015
I have a description field in a table which also stores unit of measure in the same column but with some space between them, I need to split these into two different columns.
For Eg:
Description
APPEARANCE UNIT
BDV KV
DENSITY KG/L
View 9 Replies
View Related
Jun 17, 2015
I have a SQL query like this
select CurrencyCode,TransactionCode,TransactionAmount,COUNT(TransactionCode) as [No. Of Trans] from TransactionDetails where CAST(CurrentTime as date)=CAST(GETDATE()as date) group by TransactionCode, CurrencyCode,TransactionAmount order by CurrencyCode
As per this query I got the result like this
CurrencyCode TransactionCode TransactionAmount No.OfTrans
AED BNT 1 1
AED BNT 12 1
AED SCN 1 1
AED SNT 1 3
[Code] ....
But I wish to grt result as
CurrencyCode TransactionCode TransactionAmount No.OfTrans
AED BNT 13 2
AED SCN 1 1
AED SNT 11 7
AFN BPC 8 6
[Code] ....
I also tried this
select CurrencyCode,TransactionCode,TransactionAmount,COUNT(TransactionCode) as [No. Of Trans]
from TransactionDetails where CAST(CurrentTime as date)=CAST(GETDATE()as date)
group by TransactionCode order by CurrencyCode
But of course this codes gives an error, but how can I get my desired result??
View 5 Replies
View Related
