Does anyone know where to declare the target directory for scripted output from Enterprise Manager?
Every time I get EM to script Tables I want the output not to go to c:mssql7inn . . but somewhere else. Trouble is I can't find where to set this variable. It won't work in a shortcut - I've tried that, and I can't find an ini file either.
Seems like a simple problem to fix if you just know where to look !
hello all,
Does anyone know know which files Enterprise Manager uses to save the settings (i.e. registered computers and groups)?
I would like to reinstall enterprise manager, but I do not want to reconfigure all of the server registrations.
Thanks,
Matt
On one of our machines, all of the SQL Server 2000components except for the main Server component (SQL Servercore) itself were installed (Management tools, etc) a while agoand everything was running fine. Now I go and add/install theServer component and then Service Pack 3a.It seems that Service Manager won't start up (I get an hourglass cursor)and now I find that Enterprise Manager won't run as well. No errormessages appeared and I don't think I saw anything unusual inthe log file.However, I can use Enterprise Manager on a differentmachine and connect to the database (so the databaseitself seems to be running).Any suggestions as to what the problem might be and how tofix it? I like to see if I can repair this without havingto do a reinstall.Thanks.PF
View 2 Replies View RelatedIF someone can assist me. Everytime I load up enterprise manager the service manager turns off. And the enterprise manager can't connect to the local database. But everytime i turn it back on and try to connect again it shuts it off and around and around we go. Help would be appreciated. Thanks.
View 2 Replies View RelatedDo anyone knows the syntax for saving the results from a query to a text file
in query analyzer?
Thanks!
Vic
Hi,
I've a large number of stored procedures that output result sets, as part of a test script it would be useful for me to be able to save the results from these stored procedures into temporary tables, without having to pre-create these tables, i.e. use the equivalent of a select * into statement.
Is this possible ?
Sean
Greetings,I have what seems a simple problem....I want to save the output from the following queries in 1 file in'SQL Query Analyser', but I can only save each 'grid' separately.I have about 30 queries in total. 'Messages' tells me the number ofrows affected but I need the data.So can I save all the grids together at the same time in 1 file ?ThanksMikePRINT 'HEAT 3510'SELECT f.persfirstname AS First_Name,f.perslastname AS Last_Name,a.rsrchqnumber AS Personal_nr,b.asgtassignmentid AS Contract_nr,ISNULL(c.tishcode,'') AS TS_Id,ISNULL(d.tpitpayrollcode,'6900') AS Pay_Code,d.tpitdaydate AS Payroll_Date,c.tishactualenddate AS TS_end_dateFROM resources aINNER join assignments b ON b.asgtrsrcguid = a.rsrcguidINNER join timesheets c ON c.tishasgtguid = b.asgtguidINNER join users e ON e.userguid = a.rsrcuserguidINNER join persons f ON e.userpersguid = f.persguidLEFT OUTER join timesheetpayrollitems d ON d.tpittishguid =c.tishguidWHERE a.rsrchqnumber = 80000147and b.asgtassignmentid = 0000001234and c.tishactualenddate > '20050614'and (d.tpitdaydate > '20050614'or d.tpitdaydate IS null)order by d.tpitdaydateSELECT f.persfirstname AS First_Name,f.perslastname AS Last_Name,a.rsrchqnumber AS Personal_nr,b.asgtassignmentid AS Contract_nr,ISNULL(c.tishcode,'') AS TS_Id,c.tishactualenddate AS TS_end_date,g.thisdaydate AS TSH_dateFROM resources aINNER join assignments b ON b.asgtrsrcguid = a.rsrcguidINNER join timesheets c ON c.tishasgtguid = b.asgtguidINNER join users e ON e.userguid = a.rsrcuserguidINNER join persons f ON e.userpersguid = f.persguidINNER join timesheethistory g ON g.thistishguid = c.tishguidWHERE a.rsrchqnumber = 80000147and b.asgtassignmentid = 0000001234and c.tishactualenddate > '20050619'order by g.thisdaydatePRINT 'HEAT 3213'
View 3 Replies View RelatedI am learning SSIS, and am trying to save the XML output from a SQL task executing a stored procedure. I need to either save it to a .xml file, then FTP the .xml file to an external server, or do the reverse (FTP, then save file.) I can't get past the SQL task so that it works with the File System Task, or the FTP task.
Here is the stored procedure
Create Procedure [dbo].[HRGCSpace]
(@HRGSpace nvarchar(max) = ''Output)
as
Begin
Set NOCOUNT On
set @HRGSpace = (select
CustomerNumber 'CustomerNumber/@id',StartDate 'StartDate/@id', EndDate 'EndDate/@id',Action 'Action/@id',
WorkZoneNumber 'WorkZoneNumber/@id',BuildingName 'BuildingName/@id',BuildingFloorPlan 'BuildingFloorPlan/@id',
FloorName 'FloorName/@id',FloorFloorPlan 'FloorFloorPlan/@id',SpaceName 'SpaceName/@id',VacantUnit 'VacantUnit/@id',
SpaceFloorPlan 'SpaceFloorPlan/@id',Address1 'Street/@id',Address2 'Street2/@id',City 'City/@id',
StateProv 'StateProv/@id',ZIPPost 'ZipPosCode/@id',MoveOutDate 'MoveOutDate/@id'
from HRGCvCorrigoUnits
order by BuildingName, SpaceName
For XML Path ('Space'), Root('HRGSpaces'))
End
--------------------------------------
Here is the execute from the SQL Task
DECLARE @HRGSpace nvarchar(max) EXEC HRGCSpace @HRGSpace Output
If I define the SSIS variable User::HRGSpaces as string, Direction = Output, Parameter Name = 0, Parameter Size = 0
, then use in the SQLTask
General ResultSet = None, Bypass Prepare = True, Connection Type = OLE DB, IsQuery Stored Procedure = False,
Parameter Mapping for User::HRGSpaces,Direction = Output, Parameter Name = 0, Parameter Size = 0
the Progress is
"Progress: Executing query "DECLARE @HRGSpace nvarchar(max) EXEC HRGCSpace @HR". - 100 percent complete
Task Execute SQL Task - select the XML Output failed
Error: The wrapper was unable to set the value of the variable specified in the ExecutionValueVariable property.
If I change it so that ResultSet = XML, the Progress is
" [Execute SQL Task] Error: There is an invalid number of result bindings returned for the ResultSetType: "ResultSetType_XML".
If I add ResultName = 0, and VariableName= HRGSpaces, I'm back to
"Progress: Executing query "DECLARE @HRGSpace nvarchar(max) EXEC HRGCSpace @HR". - 100 percent complete
Task Execute SQL Task - select the XML Output failed
Error: The wrapper was unable to set the value of the variable specified in the ExecutionValueVariable property."
Leaving the ResultSet = XML, and changing the SSIS variable as Object, the Progress is
" [Execute SQL Task] Error: There is an invalid number of result bindings returned for the ResultSetType: "ResultSetType_XML".
Changing the ResultSet back to None, but leaving the variable as Object, the SQL task will successfully execute, but the File System Task with IsSourcePathVariable = True and SourceVariable = User::HRGSpaces when executed errors out with
"[File System Task] Error: Variable "HRGSpaces" is not a string. Error: There were errors during task validation. Validation is completed. Warning: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (3) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
So, how to I resolve the Object vs String definition. Any help in getting beyond this is appreciated!
I am using Windows Synchronization Manager to sync up a web based Merge Replication. Is there anyway to get Windows Synchronization Manager to save the passwords for the distributor, publisher, and the basic auth for the web server? I know the easy way would be to use windows auth by that is not an option in my scenario.
It is a pain to have to type them in everytime I want to sync my databases...
We are running 2014 enterprise. Our users love to see related report sections saved in separate tabs of the same spreadsheet. Is there a way to control how ssrs will save a report to excel when it comes to tabs?
Are subreports a/the way (and only way) to do this?
By sections I mean they might have a grid, then another grid, then a graph then another graph and so on.
What property controls the tab name? What if they want to combine 2 or more sections into one tab?
User A creates the SSIS Package and provides the password for the connection manager for a task (for OLE DB source) with SQL authentication.
When User B tries to run the SSIS package, the error is thrown as : The package may be damaged.
On typing the password again inside the connection manager, the execution occurs successfully. Is there any workaround to save the password permamanently for the connection manager rather than each user entering it in order to run the package ?
Hello everyone
I'm very new to SSIS and seemed to have stumbled into an expected problem. I'm working on a package that was converted from a DTS package and I have a problem with the Flat File Connection manager. I want to change the file name in my connection, but I do not seem to be able to save the change. After clicking "OK" to save the name change I can then save the package, close BIDS, open everything up again and for some reason the "old" filename is still present in the connection. Note that the "new" file has exactly the same layout as the "old" file, just a different name. And I can oreview the data without any difficulty.
Any ideas on this one...?
Thanks, John
I am asked to create 100 procedures to a database. Any best way to create them in a database one by one by calling the files and saving the execution output files in a folder?
View 9 Replies View RelatedHi
has anyone used this tool to upload sql databases to a web host
i'm struggling
cheers!!!
Adrian
I installed SQL Server MSDE 2000 but I can't find how to start it. Does this package include an Enterprise Manager or not? I thought that maybe it was a standard XP Pro feature. I had no problem finding it in W2000 Pro.
View 1 Replies View RelatedWhen I open databases, there is nothing there - not even Master, Model, Temp, Pubs, etc.
When I open the query analyzer, however, they all appear in the drop down.
What is up with that? and how can I remedy?
OP sys:Win98
SQL Server 7
Has anyone encountered this error: When you are in Enterprise manager and you select a database then the tables tab and then you select a table and go to open table- select all rows, I get an error--An unexpected error happened during this operation-Query Designer encountered a query error! Please let me know if you have seen this. Also, when I access this from one networked computer I get the same error, then when I access it from another I do not!! The servers are interacting with Pivotal. The one that works does not!!
View 3 Replies View RelatedHi all,
I have SQL 7.0 desktop addition installed on my local win NT workstation. I am able to connect to my local server using Quary Analyser but when i am trying to connect using EM, i am not able to connect. I am receiveing the following error message.
__________________________________________________ ___________________________
A conncetion could not be established to "servername" - Specified SQL Server not found. ConnectionOpen(CreateFile()).
Please verify SQL server is running and check your SQL Server registration properties(by right clicking "servername" node) and try again.
__________________________________________________ ___________________________
I have tried as said in the error message and also tried connecting with "sa" but its not working. I can see that the server is running and i am able to connect through QA.
any help is highly appriciated.
We can no longer open tables in EM. The error message is;
An unexpected error happened during this operation
[Query] - Query Designer encountered a Query error:
Unspecified error
The tables are fine - can access them other ways.It looks as if the fault is in the script used by EM. Anyway to clear this ??
I am fairly new sql dba in a company and I am sure Enterprise Manager is installed on PC's and it shouldn't. Is there a way of finding out other then visiting each workstation. Thanks in advance..
View 1 Replies View RelatedI am considering upsizing my Access 2000 DB to a SQL 7 server. I was told that having SQL 7 Enterprise Manager is highly prefferd but not essential as I can maintain the upsized DB with Access 2000. The only way that I have been able to find JUST enterprise manager seems to be with purchasing the whole SQL 7 program for $1300! Microsoft cannot be that cruel, that you have to buy the whole program just for Enterprise Manager!
My questions are:
Can I download just MS SQL 7 Enterprise Manager anywhere for a reasonable fee or free?
and
if not, can I continue to use Access 2000 to maintain the SQL 7 upsized DB?
I have access to a SQL 7 server via my ISP Hosting account. I know Enterprise manager comes with the server software, but how can I get a copy of JUST Enterprise Manager?
JD
Is non-SA account able to view the SQL Enterprise Manager?
Thanks in advance!
Plum
Is it possible to administer both 6.5 and 7.0 databases from the same SQL Enterprise Manager? I have read that you cannot do this because the 7.0 "plug-in" to the MMC wont work with 6.5 databases.
View 2 Replies View RelatedWe had database corruption and cannot access the Enterprise Manager. DBCC returned errors 9000 to 9999 which I can't get any suggestions on how to handle from BOL. Any ideas!!!!! Thanks.
View 4 Replies View RelatedHi,
I would like to know if we can present users to access details database information about the databases on a server through Enterprise Manager.
If you create a SQL login and do NOT give it access to any database, if someone logons on your server with enterprise manager, even though he does not have access to any database, he will still see the list of all database on your servers plus tons of sensitive information like database owner.
Is is possible to limit enterprise manager to only view information about database that the user has access to?
Thanks
Mark
How can I force users of Ent Manager 6.5 to enter a name/password when connecting to a server that has been registered? I dont want to use the sa name and password so that anyone could use my workstation to access our servers.
View 2 Replies View RelatedDoes anyone know how to turn off or disable the auto discovery for Enterprise Manager. Apparently our Network group is complaining that Enterprise Manager is generating noise on the network, it is not signifcant in volume but they complain it impacts there ability to detect hacking attempts on our network because it causes some false positives. I generally keep Enterprise Manager running because I will always have some manual job running from it and we have so many servers it takes awhile for them to all load when I first fire it up.
Thomas
Hello guys,
Just wondering if i can use CPU, Memory usage, I/O or wait events for SQL trace. I am having difficulty in finding theses events on SQL trace.
Also is it possible to show the SQL trace file output in graphical format.
Thanks
Hi,
I have SQL server 2000 client machine on my XP desktop which worked fine
until yesterday.
Yesterday, I tried to set up client access (a tool from IBM to access AS400) unsuccesfully. Since ever, Each time I try to open a table in enterprise manager, I get the following error message
"The query cannot be executed because some files are either missing or not
registered. Run setup again to make sure the required files are registered".
While when I issue a query in analyzer it works fine.
I did that several times without success. Even, I removed the whole SQL 2000
setup, rebooted my machine, ran set up again for client tools which gave the
same result. Also, I re-setup MDAC2.6 SP2 but no way.
Which files are corrupted ?and I don't understand after doing all that,
setup goes smoothly without indicating any errors, but still when you open a
table in enterprise manager, it gives the same error.
Thanks in advance
Hi,
Using MS SQL Server 7. When I go into a table in design view and order by date created, it only orders on the day and not the date (Enterprise Manager) e.g.
29/08/1981, 11/12/2004, 31/12/2003
should be
11/12/2004
31/12/2003
29/08/1981
but it's this instead
31/12/2003
29/08/1981
11/12/2004
Please help.... is this a bug
Hi,
My Question is regarding the Query Analyzer.
When we click on the Query Analyzer Shortcut, it will prompt for a user id and password.but when we expand the databases node from EM and clicks on Tools->Query Analyzer Menu, after selecting a database node, the QA does not prompt for the user id and password. Can any one explain this behaviour of QA..
I am using Mixed mode authentication for my db server.
Hi All,
When I view the database properties using Enterprise Manager, some of the databases on the server are reporting that there is zero space available while others have space available. Does anybody know why?