Saving Data Into A Table & Multiple Processors
Mar 10, 2000
Hello,
Yesterday I was looking to the processor usage in the Task Manager of Windows NT when a script of mine was running. The script was an InfoPump Script; which is a tool from the DecisionBase suite from CA (was previously owned by Platinum). This script contains SQL statements that select data from several tables and stores the result into another table. The SQL code used for this looks fine to me.
The query was running on a Compaq Proliant 5500 with 4 500 Mhz Xeon processors, 1 GB RAM, NT Server 4, SP 5, RAID 5. The SQL Server is configured to use all resources and SQL has normal priority on NT.
When the select part was running al four processors were used for about 75% and when the store happens only 1 processor is used for 100%.
Why is the store not spread over all four processors? It only uses one processor and it seems to be a bottleneck.
Stef
View 2 Replies
ADVERTISEMENT
Jun 19, 2003
We are looking at upgrading our SQL Server machine to multiple processors.
Will this act alone result in a performance improvment?
View 3 Replies
View Related
May 30, 2007
I'm spec up a new server At the minimum I'll specify a quad core cpu. What would be the best way to utilize the cores? Assign a core to specific processes (tempdb?) or let sql server figure out the best way to used the processors it finds?
View 1 Replies
View Related
Oct 9, 2007
Hello all,
We've had a problem for a few months now that has completely stumped us. We are running a heavily cursored massive data manipulation process on a 32 bit SQL Server instance running on a virtual machine, running ontop of VMWare, with the following specs
Processors: 2x2674MHz processors
Memory: 4GB
RAID 10 disk config
When we run our process on this machine, in total it runs in 30 hours.
When this process is run on another 32 bit server with the following specs
Processors: 8x3658MHx processors
Memory: 8 GB
SAN w/ RAID 5 disk config
It runs 25% slower
But here is the real kicker. When this process is run on a 64 bit server with the following specs
Processors: 8x3658MHz processors
Memory: 8 GB
SAN w/ RAID 5 disk config
It runs 75% slower.
This process consists solely of stored procedures written in TSQL. The weird thing is that on our smaller server, the CPUs' % utilization are evenly balanced (at 20-30%) when this large data manipulation process is running. However on the bigger servers, SQL Server latches onto a single processor and doesn't load balance across other processors. Such that what we're seeing is that only one processor out of the eight will be utilized and it will be throttled at 90% while the other 7 are at zero.
The default configuration settings in all three places.
Has anyone ever seen any behavior like this, where only one processor gets used by SQL Server during processing? Granted our processes are single threaded b/c they are using cursors but, it seems that the single thread shouldn't be restricted to one processor.
Any thoughts?
View 3 Replies
View Related
Jun 14, 2007
Hi
I’m making a very primitive shopping cart. I’ve created a table containing a list of products and using an SQLdataSource with a GridView I’ve got the products displayed – simple.
What I now need is to add a button with an Insert command, but the SQL needs to add a row of data to a different table – tblShoppingBasket. I’ve tried adding in the insert command and changing the SQL but it doesn’t add a new record, although is also doesn’t through and error.
The second part of the problem is need to pass the productID from the row they selected (pressed the button that triggered the insert command) and add this to the shoppingBasket table via the insert SQL.
I’d really be grateful for any help (code below).
ThanksRichard
<asp:SqlDataSource ID="SqlDataSource_GenralProducts" runat="server" ConnectionString="<%$ ConnectionStrings:AquilaConnectionString %>"
SelectCommand="SELECT * FROM [tblProducts] WHERE ([productAgeGroup] = @productAgeGroup)"
InsertCommand="INSERT INTO [tblShoppingBasket] ([userID], [productID]) VALUES (@userID, @productID)">
<SelectParameters>
<asp:Parameter DefaultValue="3" Name="productAgeGroup" Type="Int32" />
</SelectParameters>
<InsertParameters>
<asp:Parameter Name="userID" Type="Object" DefaultValue="123"/>
<asp:Parameter Name="productID" Type="Int32" />
</InsertParameters>
</asp:SqlDataSource>
<asp:GridView ID="GridView3" runat="server" AutoGenerateColumns="False" DataKeyNames="productsID"
DataSourceID="SqlDataSource_GenralProducts">
<Columns>
<asp:ImageField DataImageUrlField="productThumbNail" DataImageUrlFormatString="../images/shop/thumbNails/{0}">
</asp:ImageField>
<asp:BoundField DataField="productLabel" HeaderText="Product:" SortExpression="productLabel" />
<asp:BoundField DataField="productDescription" HeaderText="Description:" SortExpression="productDescription" />
<asp:BoundField DataField="productCost" HeaderText="Cost:" SortExpression="productCost" />
<asp:ButtonField ButtonType="Button" CommandName="insert" Text="Add to Shopping Basket" />
</Columns>
</asp:GridView>
View 1 Replies
View Related
Apr 15, 2014
I am facing a problem in writing the stored procedure for multiple search criteria.
I am trying to write the query in the Procedure as follows
Select * from Car
where Price=@Price1 or Price=@price2 or Price=@price=3
and
where Manufacture=@Manufacture1 or Manufacture=@Manufacture2 or Manufacture=@Manufacture3
and
where Model=@Model1 or Model=@Model2 or Model=@Model3
and
where City=@City1 or City=@City2 or City=@City3
I am Not sure of the query but am trying to get the list of cars that are to be filtered based on the user input.
View 4 Replies
View Related
Nov 24, 2006
Hi, all here,
Thank you very much for your kind attention.
I am wondering if it is possible to use SSIS to sample data set to training set and test set directly to my data mining models without saving them somewhere as occupying too much space? Really need guidance for that.
Thank you very much in advance for any help.
With best regards,
Yours sincerely,
View 5 Replies
View Related
Sep 15, 2005
Greetings,I have what seems a simple problem....I want to save the output from the following queries in 1 file in'SQL Query Analyser', but I can only save each 'grid' separately.I have about 30 queries in total. 'Messages' tells me the number ofrows affected but I need the data.So can I save all the grids together at the same time in 1 file ?ThanksMikePRINT 'HEAT 3510'SELECT f.persfirstname AS First_Name,f.perslastname AS Last_Name,a.rsrchqnumber AS Personal_nr,b.asgtassignmentid AS Contract_nr,ISNULL(c.tishcode,'') AS TS_Id,ISNULL(d.tpitpayrollcode,'6900') AS Pay_Code,d.tpitdaydate AS Payroll_Date,c.tishactualenddate AS TS_end_dateFROM resources aINNER join assignments b ON b.asgtrsrcguid = a.rsrcguidINNER join timesheets c ON c.tishasgtguid = b.asgtguidINNER join users e ON e.userguid = a.rsrcuserguidINNER join persons f ON e.userpersguid = f.persguidLEFT OUTER join timesheetpayrollitems d ON d.tpittishguid =c.tishguidWHERE a.rsrchqnumber = 80000147and b.asgtassignmentid = 0000001234and c.tishactualenddate > '20050614'and (d.tpitdaydate > '20050614'or d.tpitdaydate IS null)order by d.tpitdaydateSELECT f.persfirstname AS First_Name,f.perslastname AS Last_Name,a.rsrchqnumber AS Personal_nr,b.asgtassignmentid AS Contract_nr,ISNULL(c.tishcode,'') AS TS_Id,c.tishactualenddate AS TS_end_date,g.thisdaydate AS TSH_dateFROM resources aINNER join assignments b ON b.asgtrsrcguid = a.rsrcguidINNER join timesheets c ON c.tishasgtguid = b.asgtguidINNER join users e ON e.userguid = a.rsrcuserguidINNER join persons f ON e.userpersguid = f.persguidINNER join timesheethistory g ON g.thistishguid = c.tishguidWHERE a.rsrchqnumber = 80000147and b.asgtassignmentid = 0000001234and c.tishactualenddate > '20050619'order by g.thisdaydatePRINT 'HEAT 3213'
View 3 Replies
View Related
Oct 31, 2007
Hi everyone, I'm very new to SQL and SQL Reporting Services.
However I've been given a task.
How do I save multiple reporting services reports onto a predetermined location on a users local pc? Are there tools/applications that can be used to push files onto the users local pc?
The application uses .NET but they've created reports using SQL Reporting Services. The user will select which report they want (out of 2). My task is to figure out how can we save those reports that they have selected onto their pc?
Thanks in advance
View 1 Replies
View Related
Aug 4, 2015
I have a table called ADSCHL which contains the school_code as Primary key and other two table as
RGDEGR(common field as SCHOOl_code) and RGENRl( Original_school_code) which are refrencing the ADSCHL. if a school_code will be updated both the table RGDEGR (school_code) and RGERNL ( original_schoolcode) has to be updated as well. I have been provided a new data that i have imported to SQL server using SSIS with table name as TESTCEP which has a column name school_code. I have been assigned a task to update the old school_code vale ( ADSCHL) with new school_code ( TESTCEP) and make sure the changes happen across all 3 tables.
I tried using Merge Update function not sure if this is going to work.
Update dbo.ADSCHL
SET dbo.ADSCHL.SCHOOL_CODE = FD.SCHOOL_Code
FROM dbo.ADSCHL AD
INNER JOIN TESTCEP FD
ON AD.SCHOOL_NAME = FD.School_Name
View 10 Replies
View Related
Oct 28, 2015
We are running 2014 enterprise. Our users love to see related report sections saved in separate tabs of the same spreadsheet. Is there a way to control how ssrs will save a report to excel when it comes  to tabs? Â
Are subreports a/the way (and only way) to do this?Â
By sections I mean they might have a grid, then another grid, then a graph then another graph and so on.Â
What property controls the tab name? What if they want to combine 2 or more sections into one tab?
View 7 Replies
View Related
Jun 11, 2007
I would like to find out how to capture record count for a table in oracle using SSIS and then writing that value in a SQL Server table.
I understand that I can use a variable to accomplish this task. Well first issue I run into is that what import statement do I need to use in the design script section of Script Task. I see that in many examples following statement is used for SQL Server databases:
Imports System.Data.SqlClient
Which Import statement I need to use to for Oracle database. I am using a OLE DB Connection.
any idea?
thanks
View 16 Replies
View Related
Feb 12, 2008
Hello,
I am wondering what conversion rules apply, when a string, which contains a number, is saved to a SQL Server 2005 into a column of type decimal.
This is the code I€™m using (C++):
CString cValue = "0.75"
_variant_t vtFieldValue;
vtFieldValue = _variant_t(cValue)
pRecordSet->Fields->Item["MyColumn"]->Value = vtFieldValue;
"pRecordSet" is an ADO recordset. The database column "MyColumn" is of type "decimal(19,10)".
The most important question for me is, if the regional settings of the database server or the regional settings of the client PC are considered during the conversion from the string to the decimal value. For example in standard French regional settings the "." would not be recognized as decimal separator.
I am also wondering if the language of the database instance, in which this data is saved, is considered during this conversion or any other settings of this database instance.
So my general question is: Does anybody know exactly what rules apply during the above mentioned conversion?
Thank you for your help.
Regards,
Volker
View 2 Replies
View Related
Jun 18, 2007
I need to get the total reps by total and active status for the last 30 days.
There are two tables: Orders, and Customers. Orders just has the order date while customers has type and status columns.
Total: Customers.Status = any, customers.type = 'distributor'
Active: Customers.Status = 'Active' customers.type = 'distributor'
how would i do a sum on these two for the same report when both of the sums use different values?
View 4 Replies
View Related
May 26, 2008
Hi,
I have one one XLS File i need to import data in 2 diffrent SQL SERVER 2005. For e.g One Master Table X and Child Table Y. X Table columns mastertabid, col1,col2,col3, etc etc..master table columns are fix.
and Child table columns childtabid,mastertabid,childcol1,childcol2,childcol3,childcol4, etc. etc.. Child table columns are not fix it may be 5,10,15 or 20...
Now, at the time of importing XLS file i need to insert data in both table. most importing thing is i need to add data in child table with reference of mastertabid..i have to add this column value.
I can do it with business logic, i can do it but it makes my page slow...and i dont want to do that...
how can i do that, plz. guide me....
Thanks
Chirag
View 5 Replies
View Related
Dec 13, 2007
Hi Guys,
I am trying to automate a basic task using SQL Server 2005 Express.
Currently I have a query script that I run and then save the results as a CSV file. I need to do this on a daily basis and so I am looking to find out how best to go about this. There are a multitude of third party tools that claim to be able to do this - can anyone recommend this or enlighten me of the best way to set up this automation.
All ideas gratefully received!
View 1 Replies
View Related
Jul 26, 2007
i am using asp.net vb, i have 2 table show as below if i want to delete the forumid 1 row,then how would i delete the topic table who belong to the forumid 1.
how would 1 do it if i am using gridview
Forum table
Forumid | Forumname
1 | hi
2 | me
Topic table
Topicid | Forumid | Topicname
1 | 1 | yo
2 | 1 | everyone
3 | 1 | google
View 1 Replies
View Related
Sep 25, 2013
Our database stores vehicle data in one table, but 3 different types of data are stored in the one table. The table contains all the columns for all 3 types so when you query the table you get at least 3 rows back with null values for all the columns that don't apply to that record. The data is imported to the table when it's updates so there's a possibility that they're updated at different times so they have a different BATCH like:
BATCH TYPE ID RATING INSURANCE SAFETY
300 SAFE 123 NULL NULL A
300 INS 123 NULL YES NULL
250 RATE 123 A NULL NULL
What I'd like returned is:
ID, RATING, INSURANCE, SAFETY
123 A YES A
I'm trying to do a case statement to pull the data down, but I keep ending up with multiple rows because of all the nulls. I tried doing a SUM of the case statement with an ISNULL(SAFETY,0) but I can't SUM char values. I can probably do this with 3 temp tables to load the data that I want for each TYPE into them and then select and join them together, but is there a better way to do this?
View 2 Replies
View Related
Apr 28, 2014
Let us suppose I've 3 tables in which 2 columns data are same in all 3 tables & rest fields are distinct
Table 1 :
ID1 ID2 Gender Code towncode
1 12 1 234 1234
2 13 2 543 5463
89 187 1 125 N21Q
Table 2 :
ID1 ID2 Relation Name DOB
1 12 13 XYZ 21/01/1967
1 12 1 QAS 01/10/1987
1 12 2 NHS 09/12/2001
2 13 1 NHG 10/01/1987
2 13 2 GHS 16/12/1999
89 187 2 KJA 31/03/2000
89 187 1 KLA 09/11/1986
89 187 5 KOP 19/12/2001
Table 3 :
ID1 ID2 Period Date
1 12 1 01/01/2011
2 13 1 01/01/2011
89 187 2 01/01/2011
I want result as :
ID1 ID2 Gender Code towncode Relation Name DOB Period Date
1 12 1 234 1234 13 XYZ 21/01/1967 1 01/01/2011
1 12 1 234 1234 1 QAS 01/10/1987 1 01/01/2011
1 12 1 234 1234 2 NHS 09/12/2001 1 01/01/2011
2 13 2 543 5463 1 NHG 10/01/1987 1 01/01/2011
2 13 2 543 5463 2 GHS 16/12/1999 1 01/01/2011
89 187 1 125 N21Q 2 KJA 31/03/2000 2 01/01/2011
89 187 1 125 N21Q 1 KLA 09/11/1986 2 01/01/2011
89 187 1 125 N21Q 5 KOP 19/12/2001 2 01/01/2011
May be some duplicate entry of same record is available in Table 1.
View 3 Replies
View Related
Mar 18, 2008
Hello All,
I do have one large table, say "emp" having 80 columns. now as the requirement changes, i have to partition the "emp" table to 8 tables.
I want all of my existing data ["emp" table data] to be there in my new tables . i don't want to delete the existing data from "emp" table.
Cal any one please help me out to resolve this issue.
Thanks
Prashant Hirani
View 5 Replies
View Related
Sep 20, 2007
Hi,
I have 3 tables with the follwing schema
Table <Category>
{
UniqueID,
LastDate DateTime
}
Assume the follwing tables with data following the above schema
Table Cat1
{
1, D1
2, D2
3, D3
}
Table Cat2
{
2, D4
3,D5
4, D6
}
Table Cat3
{
1, D7
3,D8
5,D9
}
I have a Master and the schema is as follows
Table master
{
UniqueId,
Cat1 DateTime, -- This is same as the Table name
Cat2 DateTime, -- This is same as the Table name
Cat3 DateTime -- This is same as the Table name
}
After inserting the data from all these 3 tables, I want the my master table to look like this
Table Master
{
UniqueId cat1 cat2 Cat3
------------ --------- ------- -----------
1 D1 NULL D7
2 D2 D4 NULL
3 D3 D5 D8
4 NULL D6 NULL
5 NULL NULL D9
}
Please remember the column names will be same as that of table names
can any one pelase let me know the query t o acheive this
Thanks for your quick response
~Mohan Babu
View 1 Replies
View Related
Jun 26, 2006
Hi, Experts,
I have a data table from a old system.
There are 10 data fields stored in one row at this table.
How can I seperate those fields into another table to be 10 rows?
Any component in Data Flow can I use?(I have tried several component...)
by the way,
the original table is a large table, contain 3,000,000 rows.
Thanks for your all assistance.
View 13 Replies
View Related
May 2, 2000
Hi all,
I am using sql server 7 i am having 4 processors in development server.
How i have to allocate those servers, means all 4 do i need to allocate to sql only or 3 processors.
same like 8 processors in production, how many processors to sql..
pls tell me the way..and how..
thank u all
esh
View 4 Replies
View Related
Nov 18, 1999
Specs: Dell 6350 Poweredge, 4 Xeon 500, 4GB Ram
SQL 7 Sp1.
At some point, my 4 processors began a cycle of Peaks and Valleys.
AFter stopping ALL processes using the SQL server the processors were still doing this Max, then none, Max, then none.
I think the oddest part of this is that all 4 processoers were Exactly the same Peaks/Valleys from my Workstation (perfmon).
Anone had their processors do this? HELP PLEASE.. .
View 2 Replies
View Related
Jun 24, 2003
While installing SQL2k I selected a 4 processor liscense aggreement. The server only has two. Does anybody know of a technial reason I should change it back? Can it be done without reinstalling?
Sidney Ives
Database Administrator
Sentara Healthcare
View 2 Replies
View Related
Sep 24, 2015
I am have a situation to insert data from multiple sources to a single table.
i.e., multiple and concurrent insert on same table
Will it lead to dead lock at any point? is there any possibility?
How insert will work ? What is the architecture ? Any references to read?
View 1 Replies
View Related
Apr 29, 2008
I know that this is legal sql: "SELECT 1 AS Blah"
I want to do something like this except for I need to select multiple rows each with a different value for Blah. The query needs to be legal to be passed to the SqlCommand.ExecuteReader Method. Is this possible?
View 3 Replies
View Related
Apr 2, 2006
Hi,
I have the following scenario: N identical Databases (corresponding to different Fiscal Years, with names <Company Name>.<YEAR>). We want to consolidate the N DBs to a New Datawarehouse.
In SSIS we have designed a Dataflow that reads through a OLE DB Source (Connected to one of the N Databases) and maps to a OLE DB Destination (Connected to the NEW DB).
The question is, how we loop in SSIS through the N identical Connections, so to repeatedly execute the designed Dataflow, each time with a different Connection?
Thanks in Advance,
--Dimitris Doukas
View 3 Replies
View Related
May 4, 2007
Hi,There are 3 tablesTable,TableDetails,TableDaily.With structureTABLE:TableID UserID Money---------- ---------- ----------(int) (int) (money)TABLEDETAILS:TableDetailsID TableID ItemID PaidForItem DayID---------- ---------- ---------- ---------- ----------(int) (int) (int) (money) (int)TABLEDAILY:TableDailyID TableID PaidForItem Money Total Change---------- ---------- ---------- ---------- ---------- ----------(int) (int) (money) (money) (PaidForItem + Money) (money)"Table" holds id for user and his money amount, which changes during time. "TableDetails" holds data about items user bought, amount paid for them and dayid which relates to one particular day."TableDaily" holds history. I do not know how to update this table.I created job whish runs stored procedure. This procedure sums "PaidForItem" using group by TableID and WHERE DAYID = '11'.Problem is with Change column. This column sould hold difference between today's Total and previous one etc.Current procedure looks like this:INSERT INTO TableDaily (TableID, PaidForItem, Money, DayID)SELECT TableDetails.TableID, SUM(PaidForItem) AS PaidForItem, Table.Money, (SELECT DayID FROM Days WHERE (Aktive = 1)) AS DayIDFROM TableDetails INNER JOIN Table ON TableDetails.TableID = Table.TableID GROUP BY TableDetails.TableID, Table.Money
View 3 Replies
View Related
Aug 8, 2007
Im using MS visual web developer. I have created a website and used the database they set up by using admin tools. One page requires the take the users comment and to save it into the database. I've tried a formview and connected it to the database which worked. the problem is i cannot save whatever the user types into the textbox. {insert query didnt work with this set up }INSERT INTO aspnet_Membership(Comment) VALUES ('CommentTextBox.Text') Error: cannot set userId or to null. and if i make it allow nulls its going to move on to the next column. I would appreciate some help please. Thank you in advance.
View 4 Replies
View Related
Nov 6, 2007
Hi,
Here is a structure of my table
create table events( event_id integer primary key identity(1,1), event_name varchar(200), event_date datetime,)
Note: The event_id is a automacally and we don't need to insert record in this field.
for example
i have inserted 10 records in a table
then i deleted all records manually from sql server
but when again I save the record the event_id field shows started from 11 even the table was empty,
although it should be start from 1?
View 6 Replies
View Related
Jan 12, 2008
Hello all ...
I am facing a problem in the evaluation form that I am working on ...
I have 3 textboxes which are
Trainee ID, Trainee Name and Trainee Department
I want the Trainee ID to be saved in the Evauaiton form , The trainee id is a foregin key in the Evaluation table in my SQL table, it is coming from the trainee table where the Trainee ID is primary key and it is incremneting ...
I want the same Trainee Id to be sent to both Trainee and evaluation table , but at the same time , i want whenever a user open the evaualtion form an id will be shown and it will be inccremented ...
Hope that is clear ...
How I can solve this problem?
View 3 Replies
View Related
Feb 15, 2006
Hi there,
I have a web page (Visual Studio 2005, Asp.net 2.0) that has a series of textboxes and dropdownlists on it. I want people to be able to enter their information and click submit. When they click the submit button I want their information to save to a Sql Server 2005 database. I am having a lot of trouble finding any information on this topic. If someone could give me some sample code I would really appreciate it.
Thanks
View 2 Replies
View Related
