Hello everyone I have a stored procedure that I am trying to save datetime data to at the moment I can create a string that will output
25/05/2007 18:30
Does anyone know the best way to get this into the correct format for my SP parameter
cmdPublish.Parameters.Add(new SqlParameter("@datPublishDate", System.Data.SqlDbType.DateTime));
cmdPublish.Parameters["@datPublishDate"].Value = ????
Thanks
Hi,
I've a large number of stored procedures that output result sets, as part of a test script it would be useful for me to be able to save the results from these stored procedures into temporary tables, without having to pre-create these tables, i.e. use the equivalent of a select * into statement.
Is this possible ?
Sean
I have had the same problem. In the past I had the sql commands in the code. Last project was with SQL2000 and I decided to add store procedures part as a learning tool and part to better control the code. With the current project I am using SQL2005 and have a ummm fun time with the learning curve.
Below is my stored procedure.
USE [AdventureWorks]
GO
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER Procedure [dbo].[WDR_CountryAdd]
(
@CountryName nvarchar(50),
@CountryID int OUTPUT
)
AS
INSERT INTO Country
(
CountryName
)
VALUES
(
@CountryName
)
SELECT
@CountryID = @@Identity
When I hit the execute button, I get the following error.
Msg 208, Level 16, State 6, Procedure WDR_CountryAdd, Line 24
Invalid object name 'WDR_CountryAdd'.
I I know that it does not exist as that is what I am trying to do, create it. I have checked to make sure that I am on the currect database. So how do I associate this procedure with the data base? Do I need to write a SQL query to create the procedure? Maybe that is the answer and then just modify it.
I have in the past created stored procedures using SQL Server 2000. It was easy to do. Now I am using SQL Server 2005 and the whole process is different and confusing to me. I performed the following steps to create a stored procedure:
1.) In SQL Server management studio, I wen to the folder named "Stored Procedures"2.) I right clicked on this folder and selected "New Stored Procedure..."3.) A generic sql server stored procedure is created for me.4.) I modify the stored procedure and now want to save it?
Now where do I go from here? How should I properly save this new stored procedure and where should I save it?I noticed that a generic name is assigned such as SQLQuery13.sql, but I want to name it something else.
I actually saved the new stored procedure but I can't see it listed under the "Stored Procedures" folder. I even tried doing a refresh.
I have a table that has 5 values that I want to MSSQL to create a csv file for. After it is created, dump that csv file back into the database as a binary file. Is this possible?
View 1 Replies View RelatedHi;
I have a stored procedure simply adds userid,logintime and status to db but I have an error when running procedure can you help me please??
Create Procedure AddLog
(
@User char(10),
@DLogon DateTime(8),
@Status bit
)
As
Insert Into Log(UserID,LogInTime,Online)
Values(@User,DLogon,Status)
ERROR:
Server: Msg 128, Level 15, State 1, Procedure AddLog, Line 9
The name 'DLogon' is not permitted in this context. Only constants, expressions, or variables allowed here. Column names are not permitted.
Hi,
Can i compare date = null in stored procedure? Does this work? The syntax works but it never get into my if else statement? The weird thing here is it has been working and just this morning, it stopped. I don't know why? Could you please help? Thanks,
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
ALTER PROCEDURE [dbo].[UpdateActiveStates1]
@PROVIDERID INT
AS
DECLARE @STARTDATE DATETIME
DECLARE @ENDDATE DATETIME
DECLARE @ACTIVE BIT
SET @ACTIVE = 0
SET @STARTDATE = (SELECT ProhibitionStartDate FROM Providers WHERE ProviderID=@PROVIDERID)
SET @ENDDATE = (SELECT ProhibitionEndDate FROM Providers WHERE ProviderID=@PROVIDERID)
IF ((@STARTDATE = NULL OR @STARTDATE = '1753-01-01') AND (@ENDDATE = NULL OR @ENDDATE = '1753-01-01'))
BEGIN
PRINT 'Setting Inactive due to NULL Start Date and NULL End Date'
SET @ACTIVE=0
END
ELSE IF (@STARTDATE != NULL AND @STARTDATE <= GETDATE())
BEGIN
IF (@ENDDATE = NULL)
BEGIN
PRINT 'Setting Active due to NON-NULL Start Date and NULL End Date'
SET @ACTIVE=1
END
ELSE IF (@ENDDATE >= GETDATE())
BEGIN
PRINT 'Setting Active due to NON-NULL Start Date and NON-EXPIRED End Date'
SET @ACTIVE=1
END
ELSE
BEGIN
PRINT 'Setting Inactive due to NON-NULL Start Date and EXPIRED End Date'
SET @ACTIVE=0
END
END
UPDATE Providers SET Active=@ACTIVE
WHERE ProviderID=@PROVIDERID
UPDATE Actions SET Active=@ACTIVE WHERE ProviderID=@PROVIDERID
Hello,
I have got an SQL server stored procedure, and I would like to get this stored procedure, dbo.SpDate_Time_Minute_Today below executed against a matching or exact datetime from the database tables, PRODUCT_SALES.
Code Block
CREATE PROCEDURE dbo.SpDate_Time_Minute_Today
AS
SELECT PROD_SAL_DESC FROM PRODUCT_SALES
WHERE (CONVERT(CHAR(11), PROD_SAL_BY_DATE, 103) + ' ' + SUBSTRING(CONVERT(CHAR(17), PROD_SAL_BY_DATE, 100), 13, 19) = CONVERT(CHAR(11), CURRENT_TIMESTAMP, 103)
+ ' ' + SUBSTRING(CONVERT(CHAR(17), CURRENT_TIMESTAMP, 100), 13, 19))
/* SET NOCOUNT ON */
RETURN
PRODUCT_SALES has columns like this:
PROD_SAL_NO
PROD_SAL_BY_DATE
PROD_SAL_DESC
PROD_SAL_MFR
PROD_SAL_DEPT
Please do anyone here know how I can achieve this please. Thanks.
When I run the following code I get error "Incorrect syntax near 'MyStoredProcedureName".
Code Snippet
public static string GetWithDate(string date)
{
string connString = System.Configuration.ConfigurationManager.ConnectionStrings["Development"].ToString();
SqlConnection conn = new SqlConnection(connString);
conn.Open();
XmlDocument xmlDoc = new XmlDocument();
SqlCommand cmd = new SqlCommand("usp_SVDO_CNTRL_GetPalletChildWorkExceptions", conn); //sw.WriteLine(count++);
cmd.Parameters.Add(new SqlParameter("@date", date));
try
{
cmd.ExecuteReader();
}
catch (Exception ex)
{
Console.WriteLine(ex.Message);
}
SqlDataReader rdr = cmd.ExecuteReader(); //<---Bombs
if (conn != null)
conn.Close();
return xmlDoc.InnerXml;
}
I'm assuming this is because my Date is in the wrong format when .NET passes it. I've tested the stored procedure directly in SQL Server Managent Studio and it works (Format of date is '5/15/2008 9:16:23 PM').
How can I format a datetime field in a stored procedure to return just the date in MM/DD/YYYY format?
View 13 Replies View Relatedhello,
I have a stored procedure being called from my class.
All values are ok, except for the DateTime value. What am i doing wrong here ? Am wondering if its the date size of 50 I put there or what ?
command.Parameters.Add(new SqlParameter("@dob", SqlDbType.DateTime,50, dob1));
Error Message
Compiler ErrorMessage: CS1502: The best overloaded method match for 'System.Data.SqlClient.SqlParameter.SqlParameter(string, System.Data.SqlDbType, int, string)' has some invalid arguments
thanks
Ehi
I have a stored procedure called from ASP code, and when it is executed, the stored procedure takes in a date as an attribute.
But since the stored procedure call is really just a string in the code, it is taking in the value as a string. So in my stored procedure, I want to convert a string value to a date value.
Any idea how this is done?
In a VB.NET script, I am adding the dbnull value to a parameter that will populate a smalldatetime column:
cmd.Parameters.Add("@unitHdApprove", System.DBNull.Value.ToString)
The stored procedure then defines the input as smalldatetime:
@unitHdApprove smalldatetime,
However, the result is that the record is inserted with 1/1/1900 as the date value, instead of <NULL>.
I'm guessing that this occurs because the conversion of a '' to date will return 1/1/1900, and VB requries the parameter value to be a string (at least with this syntax), so System.DBNull.Value.ToString really equals ''.
I've rewritten the proc to accept the date as a string instead, and then for each date, cast it to a smalldatetime or set it to null as is appropriate. But this is a really bulky way to do things with more than a few dates! Is there any way to change what is in my VB code so that the procedure will insert the actual null value?
Thanks,
Sarah
Ok, i am using the convert function to get the date format from my datetime column. My problem is when C# try's to pull the column name the column name is not sent in the query. When I run the query in the query analyzer the column name is blank in the result window. How can I get the date from the record with out losing the name of my column in the query. My data binding needs the name of the column to bind the data to the drop down list control. Here is the statement:
SQL statement
SELECT DISTINCT convert(datetime, eventDT, 110) FROM tblRecognition
C# code
ddlDateTo.DataSource = _uiCode.Fill.Date();
ddlDateTo.DataTextField = "eventDT";
ddlDateTo.DataBind();
Thank you,
Hi I'm new to MS SQL and trying to write a very small dynamic stored procedure which is giving me a headache.
What I have is:
CREATE PROCEDURE busy_report
@TableName varchar(255),
@reporteddate datetime=NULL
AS
if @reporteddate is null
select @reporteddate = CURRENT_TIMESTAMP
-- Create a variable @SQLStatement
DECLARE @SQLStatement varchar(255)
SET DATEFORMAT dmy
-- Enter the dynamic SQL statement into the
-- variable @SQLStatement
SELECT @SQLStatement = "SELECT vendor, reporteddate, count(vendor) FROM " +
@TableName + "WHERE reporteddate = ' "
+ @reporteddate + " '"
-- Execute the SQL statement
EXEC(@SQLStatement)
GO
The error I keep getting is:
Server: Msg 8114, Level 16, State 4, Procedure busy_report, Line 0
Error converting data type varchar to datetime.
Any ideas appreciated.
(Edit:)
I've also tried it this way:
CREATE PROCEDURE UK_busy_report
@TableName varchar(255),
@reporteddate datetime=NULL
AS
-- Create a variable @SQLStatement
DECLARE @SQLStatement varchar(255)
SELECT @reporteddate=CONVERT(datetime, @reporteddate)
IF @@ERROR <> 0 BEGIN
/* Do some error processing */
PRINT 'Error Occured' END
ELSE
-- Enter the dynamic SQL statement into the
-- variable @SQLStatement
SELECT @SQLStatement = "SELECT vendor, reporteddate, count(vendor) FROM " +
@TableName + "WHERE reporteddate = ' "
+ @reporteddate + " '"
-- Execute the SQL statement
EXEC(@SQLStatement)
GO
Which gives me the same error!
.logic.
Hi,When I pass a date time parameter the stored procedure takes about 45seconds, when I hard code the parameter it returns in 1 second. How canI rewrite my stored procedure?@createddatelower datetimeWHERE dbo.tblCaseHistory.eventdate > dateadd(d,-7,@createddatelower )AND dbo.tblCaseHistory.eventdate < dateadd(d,-6,@createddatelower ) (45seconds)vs.WHERE dbo.tblCaseHistory.eventdate > dateadd(d,-7,'11/15/05') ANDdbo.tblCaseHistory.eventdate < dateadd(d,-6,'11/15/05') (1 second)thanks for your help,Paul
View 5 Replies View RelatedHi,
I'm having a problem with inserting a datetime value into a database using VB.net and a Stored Procedure. Below is my stored procedure code and VB.net code. Could somebody please tell me what I am doing wrong ... I am almost frustrated to tears .
Stored procedure:
ALTER PROCEDURE dbo.SPTest
@testvalue DATETIME
AS
INSERT INTO tbl_Rates VALUES (1.2, 1.3, @testvalue, 'EUR/USD')
RETURN 1
VB.NET code:
Dim RatesTA As New RatesDataSetTableAdapters.RatesTableAdapter
Dim ReturnVal As Object
ReturnVal = RatesTA.SPTest(Now)
Console.WriteLine(CType(ReturnVal, Integer))
When I run this the ReturnVal is 0.
I should also mention that my system uses the dd/mm/yyyy date format (Australian) and I am using VB.NET Express and SQL Server Express.
I want to store datetime data in data table.
I am facing problem in using datetime data value in insert statement passed via stored procedure.
Any Help !Thanks in advance
I have 3 dropdownlist server controls on my webform for the dateofbirth field. One for the day("1", "2" format), one for the month ("Jan", "Feb" format) and one for the year("1994", "1995" format). When the submit button server control is clicked i need to concatenate the day, month and year in the format 01-jan-1994 since i have the dateofbirth field datatype as datetime in my sql server table. I have declared the date variable stored procedure as "@dateofbirth datetime". Provide me the full coding.
Thanx in advance
Hello all,
Perhaps someone out there could enlighten me on the issue of date/time (particularly time) storage.
I am trying to get the time component to be stored in a Datetime field. I can do a Date only as follows:
INSERT INTO Test ([DateTime])VALUES(Cast(convert(char(10),GETDATE(),102) as Datetime))
I attempted the following:
INSERT INTO Test ([DateTime])VALUES(Cast(convert(char(8),GETDATE(),108) as Datetime))
But I cannot get the time component without the default date 1/1/1900 component.
If any of you gurus out there can help me out it would be very much appreciated.
Thanks!
Hi,
I'm trying to save times in datetime fields, but seem to have lots of issues with formats.
I'm using a multiline text box, where the user will pick from 09:00 09:30 10:00 etc, so the value that comes out in the .text property is "09:30"
Once I have that, whats the best way to convert this into the right format for a dt field? I understand it'll have todays date in it which is fine. It seems to work ok if I overwrite a textbox that's bound to a datetime field, but not if I'm sending it via an insert statement.
Also I'm using 24 hour format times, eg 14:00, do I need to do anything to ensure they're store in this format?
Hi there,I am trying to write a stored procedure in which I will retrieve SessionStartDate, SessionEndDate, and Duration (where Duration is calculdated by subtracting SessionEndDate from SessionStartDate).I was duration in the format of hours:minutes:seconds.The stored procedure is pasted below. I am getting the following error. Syntax error converting datetime from character string. Any ideas? ============================== CREATE PROCEDURE sp_ActiveSessions_UsersBrowsingDurationByDate_List ( @websiteID AS int = 0, @SelectedDateFrom AS dateTime, @SelectedDateTo AS dateTime) ASIF DateDiff(d,@SelectedDateTo,@SelectedDateFrom)=0begin set @SelectedDateFrom=null endIF ISNULL(@SelectedDateTo, '') = ''begin SET @SelectedDateTo = @SelectedDateFromendSET @SelectedDateTo = DATEADD(d, 1, @SelectedDateTo)SELECT UserID As 'User ID', SessionStartDate As 'Session Start Date', SessionEndDate AS 'Session End Date', ExitPageTitle As 'Exit Page Title', NumberOfPagesVisited As 'Number of Pages Visited', Convert(datetime, (CONVERT(DATETIME, SessionEndDate, 24) - CONVERT(DATETIME, SessionStartDate, 24)), 101) As 'Duration' FROM ActiveSessions WHERE UserID != 'Anonymous'GROUP BY SessionID, UserID, SessionStartDate, SessionEndDate, NumberOfPagesVisited, ExitPageTitleHAVING (min(SessionStartDate) BETWEEN @SelectedDateFrom AND @SelectedDateTo AND min(SessionEndDate) BETWEEN @SelectedDateFrom AND @SelectedDateTo)GO============================== <Columns> <asp:BoundColumn DataField="User ID" HeaderText="User ID"></asp:BoundColumn> <asp:BoundColumn DataField="Session Start Date" HeaderText="Session Start Date"></asp:BoundColumn> <asp:BoundColumn DataField="Session End Date" HeaderText="Session End Date"></asp:BoundColumn> <asp:BoundColumn DataField="Duration" HeaderText="Duration"></asp:BoundColumn> <asp:BoundColumn DataField="Number Of Pages Visited" HeaderText="Number Of Pages Visited"></asp:BoundColumn> <asp:BoundColumn DataField="Exit Page Title" HeaderText="Exit Page Title"></asp:BoundColumn> </Columns> ============================
View 1 Replies View RelatedHi Everyone,I've been battling this for two days with no luck. I'm using SQLServer 2000.Here's the mystery: I've got a stored procedure that takes a singlevarchar parameter to determine how the result set is sorted. Here itis:CREATE PROCEDURE spDemo @SortField varchar(30)ASSELECT dtmTimeStamp, strEmpName, strOld, strNew, strActionDescFROM ActivityLogORDER BY CASE @SortFieldWHEN 'dtmTimeStamp' THEN dtmTimeStampWHEN 'strEmpName' THEN strEmpNameWHEN 'strOld' THEN strOldWHEN 'strNew' THEN strNewWHEN 'strActionDesc' THEN strActionDescENDGOWhen I execute the stored procedure in the Query Analyzer, it worksperfectly ONLY IF the @SortField parameter is 'dtmTimeStamp' or'strNew'. When passing in any of the other three possible values for@SortField, I get the following error:Server: Msg 241, Level 16, State 1, Procedure spDemo, Line 4Syntax error converting datetime from character string.Now instead of executing the stored procedure, if I copy and paste theSELECT statement directly into the Query Analyzer (after removing theCASE statement and manually trying each different value of @SortField),it works fine for all five possible values of SortField.Even though the error points to Line 4 of the stored procedure, itseems to me that the CASE statement is causing problems for some, butnot all, values of the @SortField parameter.Any ideas?Thanks,Jimmy
View 4 Replies View RelatedI am new to work on Sql server,
I have One Stored procedure Sp_Process1, it's returns no of columns dynamically.
Now the Question is i wanted to get the "Sp_Process1" procedure return data into Temporary table in another procedure or some thing.
I need to set a variable to datetime and time to exact milliseconds in SQL server in stored procedure.
Example:
set MyUniqueNumber = 20071101190708733
ie. MyUniqueNumber contains yyyymmddhhminsecms
Please help, i tried the following:
1. SELECT CURRENT_TIMESTAMP; ////// shows up with - & : , I want single string as in above example.2.
select cast(datepart(YYYY,getdate()) as varchar(4))+cast(datepart(mm,getdate()) as char(2))+convert(varchar(2),datepart(dd,getdate()),101 )+cast(datepart(hh,getdate()) as char(2))+cast(datepart(mi,getdate()) as char(2))+cast(datepart(ss,getdate()) as char(2))+cast(datepart(ms,getdate()) as char(4))
This one doesnot display day correctly, it should show 01 but shows 1
Can you compare chars stored as ccyymmdd correctly?
Field1>=field2
I was thinking you needed to cast this information as a datetime value before you could do it.
Thanks
Hi, all here,
Thank you very much for your kind attention.
I am wondering if it is possible to use SSIS to sample data set to training set and test set directly to my data mining models without saving them somewhere as occupying too much space? Really need guidance for that.
Thank you very much in advance for any help.
With best regards,
Yours sincerely,
After testing out the application i write on the local pc. I deploy it to the webserver to test it out. I get this error.
System.Data.SqlClient.SqlException: The conversion of a char data type to a
datetime data type resulted in an out-of-range datetime value.
Notes: all pages that have this error either has a repeater or datagrid which load data when page loading.
At first I thought the problem is with the date, but then I can see
that some other pages that has datagrid ( that has a date field) work
just fine.
anyone having this problem before?? hopefully you guys can help.
Thanks,
How can I create a Cursor into a Stored Procedure, with another Stored Procedure as data source?
Something like this:
CREATE PROCEDURE TestHardDisk
AS
BEGIN
DECLARE CURSOR HardDisk_Cursor
FOR Exec xp_FixedDrives
-- The cursor needs a SELECT Statement and no accepts an Stored Procedure as Data Source
OPEN CURSOR HardDisk_Cursor
FETCH NEXT FROM HardDisk_Cursor
INTO @Drive, @Space
WHILE @@FETCH_STATUS = 0
BEGIN
...
END
END
Hi All,
i have migrated a DTS package wherein it consists of SQL task.
this has been migrated succesfully. but when i execute the package, i am getting the error with Excute SQL task which consists of Store Procedure excution.
But the SP can executed in the client server. can any body help in this regard.
Thanks in advance,
Anand
What I am looking to do is use a complicated stored procedure to getdata for me while in another stored procedure.Its like a view, but a view you can't pass parameters to.In essence I would like a sproc that would be like thisCreate Procedure NewSprocASSelect * from MAIN_SPROC 'a','b',.....WHERE .........Or Delcare Table @TEMP@Temp = MAIN_SPROC 'a','b',.....Any ideas how I could return rows of data from a sproc into anothersproc and then run a WHERE clause on that data?ThanksChris Auer
View 4 Replies View Related
I need to call a stored procedure to insert data into a table in SQL Server from SSIS data flow task.
I am currently trying to use OLe Db Destination, but I am not sure how to map inputs to OLE DB Destination to my stored procedure insert.
Thanks
update tblPact_2008_0307 set student_dob = '30/01/1996' where student_rcnumber = 1830when entering update date in format such as ddmmyyyyi know the sql query date format entered should be in mmddyyyy formatis there any way to change the date format entered to ddmmyyyy in sql query?
View 5 Replies View Related