Saving Errors In A Table / File
May 29, 2012I have procedure. say for example...
begin
select * from table_abc
end;
suppose, i get errors i.e table not found etc etc. I want to save the errors in a file or even in a table will do.
I have procedure. say for example...
begin
select * from table_abc
end;
suppose, i get errors i.e table not found etc etc. I want to save the errors in a file or even in a table will do.
I have a table that has 5 values that I want to MSSQL to create a csv file for. After it is created, dump that csv file back into the database as a binary file. Is this possible?
View 1 Replies View RelatedI'm using vs2008 programming in the latest vb.net and am pretty new to sql server. I looked up tuts and such to save changes to databases after I understood on how to connect to them get them to display and such. This is my code when I hit the "Save" button. It worked last time I was working on the program, now it doesn't, when I load up the program sometimes (i'm not sure why or under what circumstances) it'll load up the changes I made to the database through the datagrid and saved, but others it won't. What am I doing wrong? Here's my code:
Private Sub cmdSave_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles cmdSave.Click
Try
Me.Validate()
Me.FinancialBindingSource.EndEdit()
Me.FinancialTableAdapter.Update(Me.myDataSet.Financial)
Catch ex As Exception
MsgBox("Update failed")
End Try
End Sub
edit: It saves, but not completely. By that I mean, it'll save, but i'm not sure if it actually saves to the database or not. It will load back up with the data that I modified fine..unless I change any code in the program. Even if I just add a comment, the data reloads with the original data. However, if I don't touch code, it'll save my data fine. Why does it do this?
I recently updated the datatype of a sproc parameter from bit to tinyint. When I executed the sproc with the updated parameters the sproc appeared to succeed and returned "1 row(s) affected" in the console. However, the update triggered by the sproc did not actually work.
The table column was a bit which only allows 0 or 1 and the sproc was passing a value of 2 so the table was rejecting this value. However, the sproc did not return an error and appeared to return success. So is there a way to configure the database or sproc to return an error message when this type of error occurs?
I'm creating a website in asp.net, the main point will be to upload/download and watch video's/pictures and voice notes. I was going to go about on saving them to sql, but when I started researching I found that it is not a good idea to use sql for videos? Majority that I found said that it is more suitable with saving them to a file, but the problem is that there can be thousands of video's,please explain the difference of sql and file saving to me?how to do it as I have never worked with videos before so no idea how to begin saving and on..
View 3 Replies View RelatedI am storing my Compact Database .sdf file in Team Foundation Server while we develop on it. It is really frustrating that it is stored as a binary file. (This means that only one developer at a time can effectively work on it.)
I have yet to find a way to script objects from the .sdf file. Is there a way? I would like to find a way to store this file as SQL so that my team can work on it simultaneously and scripting it and storing it seems the best way.
If anyone has any ideas I would love to hear them.
Vaccanoll
I have a package in which there are only one Data flow Task and it has only three components. 1) Source , which is a SQL db 2) destination and 3) OLE DB Destination flat file Error output file. I want the error file to be created ONLY if there is any error while dumping the data into destination DB. But , the issue is, the error flat file is being created inspite of No error while dumping the data from Source to Destination.
View 5 Replies View RelatedI'm sure I'm not the only one frustrated trying to figure out which log file SSRS writes to when an error occurs. Does anybody know a sure way to tell? It doesn't change the date/time of the date modified, so you can't sort by date in windows explorer. There seems to be no rhyme or reason to which file it writes to. For example, I had to go through 6 log files to find which one was being written to. I had thought (hoped) that it would always write to the log files with the latest embedded date/time stamp as part of the file name. It does not.
I'm tempted to start using a file system spy, or resort to other tactics. Does anyone have a sure fired way to see which log file is written to when an error occurs? I'm not talking about SQL Dump files - just "normal" errors when processing reports.
Thanks,
WillyDog
I would like to find out how to capture record count for a table in oracle using SSIS and then writing that value in a SQL Server table.
I understand that I can use a variable to accomplish this task. Well first issue I run into is that what import statement do I need to use in the design script section of Script Task. I see that in many examples following statement is used for SQL Server databases:
Imports System.Data.SqlClient
Which Import statement I need to use to for Oracle database. I am using a OLE DB Connection.
any idea?
thanks
Hi guys,
View 10 Replies View RelatedDo anyone knows the syntax for saving the results from a query to a text file
in query analyzer?
Thanks!
Vic
HI every one,
I am pretty mcuh new to sql and I read all your previous replies..I jsut have my questions answered.If you can help me that would be great!
I can acces the date base using Server manager then retireve the data using the query .But now I need to convert that obtained the data into csv file n then save it into csv file.
IF you can help me out that would be great.
Hi, I'm a first time user at reporting services and in dire need of some help, I'm having a real hard time finding the information I need.
I have made two reports in Business Intelligence Development Studio that access a sql database and I can deploy them and see them at http://localhost/reports etc.
What I wan't to do is be able to "trigger" the reports to be built from a schedule (e.g. every 8 hour on weekdays, every 12 hours on weekends but should be able to be changed) and after built to be saved to a html file.
I also need to set the sql query for the dataset before generating the report (select * from table where DateTimeType between This and That).
Anyway, I'm completely lost on how to achive this and would greatly appreciate and tips or pointers to where the information can be found.
Kindest Regards
is there anyway to automatically save a view to a file at a scheduled time?
Thank you for any help or pointing me in the right direction.
Hi Gurus,
Can u help me out in the following two scenario/problems.
1. I want to save the query results (which is generated within execute sql task) to file (which does not exists & should be created at run time). is it possible?
2. Can I define the file name, in Flat File connection Manager, dynamically (by using some variable)?
Your support and help will be appreciated...
regards,
Anas
hi
I have binary files inside my database. and user should have the opportunity to download them from database to his computer. I don't want to retrive and save the file into the server first and then let him to download. is it posible???
thank you in advance
regards
hello,I am building a web page in asp.net 2.0 and i'm looking for a way to save various files uploaded by users (such as doc, pdf, cs, txt .... whatever). Obviously the normal way would be to store it on the filesystem of the web server (or any other middleware server).But I am asking if there is a way to store these files in the database, and not affect too much of the performance of the web page?I know a picture can be stored easily, but what about all the other file types? I would appreciate if someone can spead light of the subject.Thanks,Tranquil.
View 1 Replies View Relatedso i wrote this script and its pretty sweet (tara helped me before on this one) but now, for some STRANGE reason and its been reported by users the following:
the script for example dumps "first name, last name"
when we save the results as a CSV it looks good in notepad...
"first name, last name"
but we kept getting some kind of stange issues when we tried to dump that CSV data into another program to use... so i opened the CSV file in command prompt to see what it really looks like and it is actually "f i r s t n a m e , l a s t n a m e" with all these unnecessary spaces! why is it saving the CSV with spaces in it when my script is nothing of the sort? it was working fine last week, no changes were made to the script but now the CSV's are rendering those weird spaces.
hi,
please tell how to make able the asp.net page to upload a word file in sqlserver database and also retrieve it back
I am brand new to SQL. Have limited coding experience w/ Visual Basic and database ops w/ Access.
I have come into possession of a SQL 2005 database. The problem is that the designer tried to re-invent the wheel and code a very very poor LMS back end for tracking and reporting. I would like, if possible, to save the database and as far as I am aware - should be able to import into Access and generate statistics and reports to my hearts content.
I have tried w/out success to save the database going through SQL Server Management Studio Express.
Any help or information that could be provided would be appreciated. Any additional information that I can provide, please let me know.
Thanks - Will
Hi
Report created in VS has some data in the page header, but when report is saved to pdf file that data disappears in page header. The data in page header that disappear are the ReportItems taken from detail line of a table in the report body. This problem started as a result of converting existing report from sql server/VS 2003 to qsl server/VS 2005.
Before conversion, report saved to Adobe pdf file showed all data. What could be the problem?
Thank you
Appreciate your help
Hi all,
I have the "Northwind" database in my Sql Server Management Studio Express.
In my C:ProSSEAppsSamplesForChapter02Chapter02 folder, I have the following 2 files:
(1) ListColumnValues (MS-DOS Batch File)
sqlcmd -S .sqlexpress -v DBName = "Northwind" CName = "CompanyName" TName =
"Shippers" -i c:prosseappschapter02ListListColumnVales.sql -o
c:prosseappschapter02ColumnValuesOut.rpt
(2) ListColumnValues (Microsoft SQL Server Query File)
USE $(Northwind)
GO
SELECT $(CompanyName) FROM $(Shippers)
GO
When I ran the following SQLcmd:
C:ProSSEAppsSamplesForChapter02Chapter02>ListColumnValues.bat
I got the following "ColumnValuesOut.rpt" with error messages:
'Northwind' scripting variable not defined.
Msg 102, Level 15, State 1, Server L1P2P3SQLEXPRESS, Line 1
Incorrect syntax near '$'.
'CompanyName' scripting variable not defined.
'Shippers' scripting variable not defined.
Msg 102, Level 15, State 1, Server L1P2P3SQLEXPRESS, Line 1
Incorrect syntax near 'CompanyName'.
I copied these T-SQL statements from a book and I do not know how to correct them.
Please help and tell me how to correct these errors.
Thanks in advance,
Scott Chang
Hi,
I am designing a site using Visual Web Developer, CSharp and Sql server Express.
One the contact page I want to put a form that allows users to enter details about
themselves. On clicking the button this will be stored in the database under a table
called subscribers. The form will have, name, address, telephone, email fields etc.
With the email addresses from the visitors I want to be able to keep them in
a newsletter section or similar which is automated so they recevie emails from time to time
Could somebody suggest a tutorial which shows how to complete this process
using c sharp and sql.
Thanks for you time
Prontonet
Hi,
Problem:
I'm using C# 2005. The data type of the bitmap file saved to database is "long binary data". It should be "OLE Object".
Source Code:
Code Snippet
Bitmap myBitmap = new Bitmap(@"c:Picture1.bmp");
OleDbConnection conn = new OleDbConnection("<<My Connection String>>");
conn.Open();
string sql = "UPDATE Table1 SET fldOLE = @fldOLE WHERE fldID = 5";
OleDbCommand command = new OleDbCommand(sql, conn);
command.Parameters.Add(new OleDbParameter("@fldOLE", myBitmap));
int rowsAffected = command.ExecuteNonQuery();
Question:
How can I save Bitmap to database with data type "OLE Object"?
I want to save the Excel Export underneath an intranet hyperlink ? What would be the best way to do that .Right now, i am trying the regular excel file path option and placing the http link in there.
I am getting an error message on execution.
Thanks
Hi,
How to save the SSIS package results to log file using dtexec command............please help regaridng this...........
Thanks in advance,
I'm trying to import a tab separated text file into sql server 2005 using the import guide. But when running the job I get the error message
Error 0xc02020c5: Data Flow Task: Data conversion failed while converting column "Column 19" (67) to column "Column 19" (404). The conversion returned status value 2 and status text "The value could not be converted because of a potential loss of data.".
(SQL Server Import and Export Wizard)
The column 19 which reported a problem contains this information:
?searchroot=/_gen_/txt/&template=std.htm&use=prospect&intref=1_26067
However what is mysterious is that if I open the file in notepad or Excel and resave it again the job runs perfectly. This is not a way we could make it work later on since it's an automatic job that will run each night on a new text file.
The text file is sent from Norway to Sweden - and I use ANSI latin 1 when importing.
The column has datatype DT_STR with a width of 500.
I use Locale Swedish and when I save in Notepad it is saved in ANSI,
I use Windows XP Swedish version.
Hello everyone
I'm very new to SSIS and seemed to have stumbled into an expected problem. I'm working on a package that was converted from a DTS package and I have a problem with the Flat File Connection manager. I want to change the file name in my connection, but I do not seem to be able to save the change. After clicking "OK" to save the name change I can then save the package, close BIDS, open everything up again and for some reason the "old" filename is still present in the connection. Note that the "new" file has exactly the same layout as the "old" file, just a different name. And I can oreview the data without any difficulty.
Any ideas on this one...?
Thanks, John
Hi Guys,
I am trying to automate a basic task using SQL Server 2005 Express.
Currently I have a query script that I run and then save the results as a CSV file. I need to do this on a daily basis and so I am looking to find out how best to go about this. There are a multitude of third party tools that claim to be able to do this - can anyone recommend this or enlighten me of the best way to set up this automation.
All ideas gratefully received!
Is there anyway to send excel file from ssis using send mail task without saving the excel file locally. I need to automate the process which involves loading the excel file from the database and send it to some people.
View 6 Replies View Relatedduring period of troubles connecting to Local Servers and Sites location i.e., to [URL], the place where all Reports are saved by default, I have continued to work on some Reports that have been saved to file system of my localhost/developing machine. But, upon recovery of http location, I can not see/open those files?
how to approach those files in order to open them in Report Builder 3.0 and thus, to "save as" them to the http location? Seems that Report Builder has chosen that location, by default, somehow.....
Hi
I’m making a very primitive shopping cart. I’ve created a table containing a list of products and using an SQLdataSource with a GridView I’ve got the products displayed – simple.
What I now need is to add a button with an Insert command, but the SQL needs to add a row of data to a different table – tblShoppingBasket. I’ve tried adding in the insert command and changing the SQL but it doesn’t add a new record, although is also doesn’t through and error.
The second part of the problem is need to pass the productID from the row they selected (pressed the button that triggered the insert command) and add this to the shoppingBasket table via the insert SQL.
I’d really be grateful for any help (code below).
ThanksRichard
<asp:SqlDataSource ID="SqlDataSource_GenralProducts" runat="server" ConnectionString="<%$ ConnectionStrings:AquilaConnectionString %>"
SelectCommand="SELECT * FROM [tblProducts] WHERE ([productAgeGroup] = @productAgeGroup)"
InsertCommand="INSERT INTO [tblShoppingBasket] ([userID], [productID]) VALUES (@userID, @productID)">
<SelectParameters>
<asp:Parameter DefaultValue="3" Name="productAgeGroup" Type="Int32" />
</SelectParameters>
<InsertParameters>
<asp:Parameter Name="userID" Type="Object" DefaultValue="123"/>
<asp:Parameter Name="productID" Type="Int32" />
</InsertParameters>
</asp:SqlDataSource>
<asp:GridView ID="GridView3" runat="server" AutoGenerateColumns="False" DataKeyNames="productsID"
DataSourceID="SqlDataSource_GenralProducts">
<Columns>
<asp:ImageField DataImageUrlField="productThumbNail" DataImageUrlFormatString="../images/shop/thumbNails/{0}">
</asp:ImageField>
<asp:BoundField DataField="productLabel" HeaderText="Product:" SortExpression="productLabel" />
<asp:BoundField DataField="productDescription" HeaderText="Description:" SortExpression="productDescription" />
<asp:BoundField DataField="productCost" HeaderText="Cost:" SortExpression="productCost" />
<asp:ButtonField ButtonType="Button" CommandName="insert" Text="Add to Shopping Basket" />
</Columns>
</asp:GridView>
I am asked to create 100 procedures to a database. Any best way to create them in a database one by one by calling the files and saving the execution output files in a folder?
View 9 Replies View Related