Hi friends,
I couldn't find links for this issue.
1) How to write the contents of a dataset or a full resultset (from execute sql task) directly into a Sql Server 2005 table.
2) Since I have hundreds of Resulting columns, I want to create the Destination table based on the structure of the dataset.
How can we achieve this?
Thanks
Subhash Subramanyam
Hello! I would like to write a value from a column to a parameter in SSIS with the Execute SQL task. The problem is that I will never get a value for the parameter.
You can recreate the problem with the AdventureWorksDW sample database.
1. Drop an execute SQL task in the control flow
2. Set the connection to the AdventureWorksDw database
3. Write this in the SQL Statement box Select Max(FullDateAlterNateKey) as LastDate
From DimTime
4. Set the resultset to single Row
5. Under result set assign LastDate as the Result Name and create a parameter with a default date.
6. Execute the task, that will finish succesfully but the value of the parameter in 5 have not changed.
I have tried to change the scope to both the package level and the task level without any success. The value of the variable is still the default value. I have also tried a string variable without sucess.
Any ideas?
Kind Regards
Thomas Ivarsson
hi all,
in my execute sql task, i have a try catch statement to catch error code if there's an error...
begin try
insert into person.contact (contactid)
values ('1')
end try
begin catch
select @@error as ErrorCode
end catch
this ErrorCode will be mapped to a user variable.
my problem is the value for ResultSet.
in order to assign ErrorCode to the variable, i have to set the ResultSet value to Single row, but if this task does not fail, i need to set ResultSet value to None in order for it to run successfully.
How do i go about solving this problem?
Please help. thanks!
Dear all:
I had got the below error when I execute a DELETE SQL query in SSIS Execute SQL Task :
Error: 0xC002F210 at DelAFKO, Execute SQL Task: Executing the query "DELETE FROM [CQMS_SAP].[dbo].[AFKO]" failed with the following error: "The transaction log for database 'CQMS_SAP' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
But my disk has large as more than 6 GB space, and I query the log_reuse_wait_desc column in sys.databases which return value as "NOTHING".
So this confused me, any one has any experience on this?
Many thanks,
Tomorrow
In the Control flow tab, I have an Execute SQL Task that outputs full Result set into a variable of an object type. Now how can I write the contents of the Full Result Set into a text file using Script Task. I also want to format the following way while I output into a file:
Column Name 1 : Column Value
Column Name 2: Column Value and so on
I tried writing the contents of the Object Variable into a file, but the file had an output of single word: System.__ComObject.
Code for Writing the Full Result Set into a Text File
Dim RSsqloutput as String = Dts.Variables("objVariable").Value.ToString
Dim strVal as String = "File completed on " & Now() & vbCrLf & "------------------------------------------------------" & vbCrLf
oLogFile.WriteAllText("C:MyFile.txt", strValue)
oLogFile.WriteAllText("C:MyFile.txt", rsSQLOutput)
I went through this link that explains how to write XML Result Set into a File, But this doesn't help as it writes in XML format.
Would you please give me a hint of code how I can go upon.
Howdy all,
I have an Execute SQL Task that may return a result set. If it returns a result set, I'd like to log a failure in my package with the results visible.
I have logging turned on and that's working great. I've read about assigning results to a user variable of type Object and that's great. I can shred my results, thanks Jamie, with a Foreach loop no problem. Within that loop, I've got some VB that manipulates the values and will call Dts.Events.FireError as appropriate. However, VB is frowned upon here so my boss has asked that I push the VB logic into a Control Flow item.
I've built custom components already so I've got some familiarity with the process. Where I'm stuck at is figuring out _what_ the actual object type is in my code. The Connection manager is Native OLE DBSQL Native client. My Execute SQL Task uses a connection type of OLE DB with a Full result set. Results are stored in a variable named ErrorResultSet. Within the Execute method, I currently have this code set up in an attempt to pick apart the object and discover the available methods.
Code Block
Variables _variableCollection = null;
if (variableDispenser.Contains("ErrorResultSet"))
{
variableDispenser.LockForRead("ErrorResultSet");
}
variableDispenser.GetVariables(ref _variableCollection);
// Iterate through the variables that we were
// able to lock. Assigning values to entities as
// available.
foreach (Variable _en in _variableCollection)
{
switch (_en.Name)
{
case "ErrorResultSet":
Object _rs = _en.Value;
System.Type _type;
_type = _rs.GetType();
System.Data.DataSet _realResults;
_realResults = _rs as System.Data.DataSet;
// My expectation is that the cast of _realResults would
// not fail.
break;
}
}
// unlock before we go
_variableCollection.Unlock();
return DTSExecResult.Success;
At this point, my assumption is that the unboxed type of the recordset is not in the System.Data.DataSet inheritance chain as the cast failed. Anyone have insight into what it is? I can't seem to get any hits on google for what it's using behind the scenes in the Foreach ADO Enumerator.
Beyond the immediate question, anyone have thoughts on how else I can solve the problem? I had thought perhaps the task could raise an event if it returned rows but it didn't seem to have that functionality. Even if that had worked, telling the logging provider to capture the result set into the log might have been too much for native functionality. Another option I was thinking about would be to continue using the Enumerator and my custom component is a pure rewrite of the current Script task with the obvious downside being that I'd lose the generic-ness I was hoping to get with being able to hit my dataset.
Hi guys
Is there anyone who was able to successfully retrieve a full result set? I'm really having troubles getting the result after executing my query. Its really even hard to get sample codes over the net.
Please help guys.
Thanks in advance.
kix
This is the first time I've tried creating an "execute sql task" with a "full result set".
I've read in the documentation that I must set the resultname to 0, which is done, and that the variable must be of type object. Also done.
[Execute SQL Task] Error: Executing the query "select * from blah" failed with the following error: "The SelectCommand property has not been initialized before calling 'Fill'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Has anyone else had success with a full result set?
Thanks,
-Lori
Hello,
1. Can we directly install sp2 without SP1 - for sql server 2005.
2 . Iam basically dotnet developer. iam using sql server 2005 both developer and express editions. Do i need to stop sql server service before installing sp2. ?
During sp1 installation, it seems some file are locked and when it prompt, i stopped service and continued installation.
3. Moreover Sql server 2005 express edition comes along with VS2005 didn't have management studio. I feel like having entire features installed in my system. I have downloaded express edition SQLEXPR_ADV.exe. Which is better choice for installation.
thanks
karthik
hi frnds,
i have one SSIS package with single SQL Execute task.
select empname from emp
This is the query i had mentioned in that SQL task.
i had created the varibale User:rs as object and i mapped that to the resutset and i selected fullresultset in general tab.
In the debugging mode im getting the com object as the result of that variable.
This is the o/p which i got in the debugging mode.
- User::rs {System.__ComObject} __ComObject
Type __ComObject
Value System.__ComObject
but i requires the empname to be displayed in that mode.
how to get that?
pls tell me .
Is it not possible to have table name as a parameter? For example have the SQL something like:
Delete From ? Where ID = ?
.. I get error:
[Execute SQL Task] Error: Executing the query "Delete From ? Where ID = ?" failed with the following error: "Must declare the table variable "@P1".". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Dear Forum,
our goal is to install SQL Server 2005 Express Edition SP1. So far we used to install SQL Server 2005 Express Edition which resulted in the Version 9.00.1399 (basic run time machine).
We noticed that SP1 is almost the same sice as the basic run time machine. Still, we then we applied SP1. during the installation, at the window "Existing Components", the "SQL Server Database Services 9.00.1399.06 is listed with a check box. When I tick the box, the installation can continue. SP1 resulted in the version 9.00.2047. (checked on sqlservr.exe).
my question: can we install directly SQL Server 2005 Express Edition SP1 without any previous SQL Server installation at all to save installation time (and errors)?
I do now that the service packs are considered "cumulative", so SP2 includes SP1, but I do not know of SP1 includes the basice runtime machine.
thanks for your answers
mstspa
I have a sql server resultset that returns productid numbers. I would like to loop thru this resultset and run a stored procedure using the productid as the input parameter. Any samples would be helpful. thanks
View 3 Replies View RelatedI have a SQL 2000 DTS which I imported in SSIS. The data transformation tasks were not converted, but saved as SQL 2000 transformation tasks. I want to re-write this, so that it is in compliance with 2005 standards. My problem is, I can't figure out how to capture data from a SQL task, and refer to its result set in a script task. Specifically, I want to capture data by querying a view, then refer to 2 fields in that result set in a script. I want to then transform a code into a full description, and write the transformed data to an Excel destination. The vbScript code that I used in 2000 is as follows:
'**********************************************************************
' Visual Basic Transformation Script
'************************************************************************
' Copy each source column to the destination column
Function Main()
dim vEssenCode, vEssenDesc
vEssenCode = DTSSource("Essential_Code")
If vEssenCode = "E" Then
vEssenDesc = "EOC - Able to Perform"
Elseif vEssenCode = "D" Then
vEssenDesc = "Dept - Able To Perform"
ElseIf vEssenCode = "1" Then
vEssenDesc = "EOC - Not Able To Perform"
ElseIf vEssenCode = "2" Then
vEssenDesc = "Dept - Not Able To Perform"
Else vEssenDesc = "Non-Applicable"
End If
DTSDestination("Essen_Code") = vEssenDesc
Main = DTSTransformStat_OK
End Function
This worked fine until recently, but now always returns "Non-Applicable". Does anyone have any suggestions as to how I can accomplish this? I think that I have to create a data flow task with an OleDB source, send its output to an SQL Task, then send its result set to the script, do the transformation, and, finally, send its output to an Excel destination. Any suggestions will be greatly appreciated!!
Can the DTS execute SQL task recognize a table in an Access database that is linked from another Access database?
I'm attempting to use a DTS Execute SQL task connected to Access1.mdb to make a new table in Access1.mdb that is using a Subquery from a linked table in Access2.mdb . (I know it sounds convoluded..) Its giving me an error in my FROM clause as if it can't recognize the linked table from Access2.mdb.
The reason why I'm doing this is that I'm not sure how to run an Access make table query from DTS that will overwrite the existing table in Access. I get an error that the table already exists.
Any Help?
OK. I give up and need help. Hopefully it's something minor ...
I have a dataflow which returns email addresses to a recordset.
I pass this recordset into a ForEachLoop configuring the enumerator as (Foreach ADO Enumerator). I also map the email address as a variable with index 0.
I then have a Execute SQL task which receives this email address as a varchar variable (parameter 0) which I then use in my SQL command to limit the rows returned. I have commented out the where clause and returned all rows regardless of email address to try to troubleshoot this problem. In either event, I then use a resultset to store the query result of type object and result name 0.
I then pass this resultset into a script variable to start parsing the sql rows returned as type object. ( I assume this is the correct way to do this from other prior posts ...).
The script appears to throw an exception at the following line. I assume it's because I'm either not passing in the values properly or the query doesn't return anything. However, I am certain the query works as it executes just fine at the command prompt.
Try
ds = CType(Dts.Variables("VP_EMAIL_RESULTS_RS").Value, DataSet)
My intent is to email the query results to each email address with the following type of data by passing the parsed data from the script to a send mail task. Email works fine and sends out messages but the content is empty. I pass the parsed data as string values to the messagesource and define the messagesourcetype as a variable in the mail task.
part number leadtime
x 5
y 9
....
Does anyone have any idea what I might be doing wrong?
thanks
John
According to this http://msdn2.microsoft.com/en-us/library/ms143393(d=robot).aspx, it seems that it cannot. But is this a complete chart?
Thanks for any help,
Peter
Hi
I have a situation below
Table : tblStatus
Column1 : Event_Desc
Column2 : Flag
Once the flag is set to "T", I want to trigger a SSIS package named "PerformAction.dtsx"
How to write a table trigger for this.
With Regards,
Madhu
Hello,
I have data (using Full Result Set) and would like to email values.
Query output from SQL Task:
ID Client
1 ABC
2 Acme
3 Holtz
Goal email output (inside Script Task):
The following records found today:
ID Client
1 ABC
2 Acme
3 Holtz
Thank you in advance.
Note: I know how the email works, it's just passing the resultset I need help on.
I had created an Script Task to put data into the few variables then I created an SQL Execute Task to use the SQL query to collect data from a database. Now I want to put that data into a different database.
I noticed it can not be done because the SQL Execute Task is one object and the other object is Data Flow Task. (The Destination database is inside that object).
So, if it is possible then how? If not then what should be done instead?
Thanks...
How to capture execute sql task results.
Example if the execute sql task runs select statment (select * from table)means , how do i capture into sql table.
hi,
i need execute a store procedure of Informix from sql server integration services.
i use driver IBM informix provider 3.2 and have linked server Informix and use sql task for execute the procedure
it's posible??
Hi All,
My java application executes one stored procedure that returns two resultsets and then deal with data. The code actually is very simple
Statement stmt = con.createStatement(); con is database connection
ResultSet rs = stmt.getResultSet();
//Do something
rs.close();
rs = stmt.getResultSet();
//Do something
Then I got the error: The result set is closed.
The code worked well with jdbc sql server 2000 driver.
Thanks for your help.
Eric
I have a program that I'm working on that utilizes a JDBC connection to a SQL 2005 server. A result set is generated from a legacy system. The data that is pulled into this result set is in the same layout as a table in SQL 2005 server.
My question is, once I have good data loaded into the ResultSet object can I pass it to the JDBC to load it into the table?
Or do I have to use the ResultSet.get(string) to pull out each value row by row, populate a string, and then use the string in an insert statement that I pass to JDBC?
Are there tricks or optimizations I can do for this type of JDBC transfer?
--Thanks--
Have an SSIS package running great in 2008R2. It generates several flat files based on inline database queries. The first step of the package inserts a record into a log stats table and the last step of the package updates this record with the package name, run time and execution status. Now I need to add the records counts for each flat file to the log table.
Is there a way I can update one field for run counts with each of the counts for each file. So the [run counts] table column would look something like:
file1: 43522
file2: 645367
file3: 7883
Is it possible to store the record counts and flat file names in variables then concat them at the end when updating this record?
Or, is a better way to just insert/update a new record for each flat file step and log the counts for that file for its own record?
In either case, how I can capture the file count and pass that to the update statement.
I would like to find out how to capture record count for a table in oracle using SSIS and then writing that value in a SQL Server table.
I understand that I can use a variable to accomplish this task. Well first issue I run into is that what import statement do I need to use in the design script section of Script Task. I see that in many examples following statement is used for SQL Server databases:
Imports System.Data.SqlClient
Which Import statement I need to use to for Oracle database. I am using a OLE DB Connection.
any idea?
thanks
I got some xml that is essentially an html table that I need to turn into a standard table resultset from a stored proc. If you take this xml and save it as html that is the desired resultset I am looking for. I realize the <td> tags repeat so I would just prefer 'col' + positional index for the col name. Keep in mind that <td> could be is 1 to n.
<table>
<tr>
<td>cell1</td>
<td>cell2</td>
<td>cell3</td>
[Code] .....
This is my attempt but I can't figure out how to get separate cols
declare @GridData xml = '<table><tr><td>cell1</td><td>cell2</td><td>cell3</td></tr><tr><td>cell4</td><td>cell5</td><td>cell6</td></tr><tr><td>cell7</td><td>cell8</td><td>cell8</td></tr></table>'
select T.C.value('.', 'nvarchar(max)')
from @GridData.nodes('//tr') T(C)
I wan to print out the dynamic query result so that i can use as a script for some tasks.This is the scenario wher i got stuck, i am not able to print out the result as it return only the last value because of OUTPUT param limitation
Is there any way to print all the 3 INSERT stmt.
IF OBJECT_ID ('tempdb.dbo.#temp') IS NOT NULL
DROP TABLE #temp
CREATE TABLE #temp (Command varchar(8000))
INSERT INTO #temp
SELECT 'INSERT INTO Test1(column1,column2)values(1,2)'
UNION ALL
SELECT 'INSERT INTO Test2(column1,column2)values(1,2)'
[code]....
I created a simple SQL Task in SSIS.
Connection is ADO.Net
SQL Statement is SELECT 10 AS NumberVar
ResultSet is set to single row
But when executing task I always get error message:
[Task 'SQL ausführen'] Fehler: Die zurückgegebene Anzahl von Ergebnisbindungen ist für 'ResultSetType' ungültig: 'ResultSetType_SingleRow'.
In English something like returned number of bindings is not valid.
SSIS Newbie Question:
I have a simple Control Flow setup that checks to see if a particular table exists. If the table does not exists, the table is created in an alternate path, if it does exist, the table is truncated before moving to a file import Data Flow that uses an OLE DB Destination to output the imported data.
My problem is, that I get OLE DB package errors if the table the OLE DB Destination Container references does not exist when I load the package.
How can I over come this issue? I need to be able to dynamically create the table in an earlier step, then use that table to import data into in a later step in the workflow.
Is there a switch I can use to turn off checking in the OLE DB Destination Container so that it will allow me to hook up the table creation step?
Seems like this would be a common task...
Steps:
1. Execute SQL Task to see if the required table exists
2. Use expresions to test a variable to check the results of step 1
3. If table exists, truncate the table and reload it from file in Data Flow using OLE DB Destination
4. If table does not exist, 1st create it, then follow the normal Data Flow
Can someone help me with this?
Signed: Clueless with a deadline approaching...
How can I save UTF-8 strings in SQL Server 2005? I don't want to use nvarchar as it would take a lot of space and most of my text will be in latin characters (and it doesn't fully support all unicode code points anyway as it uses UCS2, I'm talking about the supplementary plane here which I know is very rarely used and most unicode fonts don't support it but it's still possible to be used at least in the future). I read in this KB article (http://support.microsoft.com/kb/232580) that my only option is to use varbinary, I'm worried though whether this could affect performance as I never used varbinary before .. I read in the same article that I cannot use varchar to store UTF-8 which I can't really understand, doesn't varchar use the whole 256 values to save character data according to the code page used? what makes UTF-8 characters not valid for being stored as varchar strings? (what I mean here is that I can do the conversion manually from varchar to UTF-8 but I only want to save the data in the varchar columns) Any suggestions are highly appreciated..
View 8 Replies View RelatedI'm looking for a way to refer to a package variable within any
Transact-SQL code included in either an Execute SQL or Execute T-SQL
task. If this can be done, I need to know the technique to use -
whether it's something similar to a parameter placeholder question
mark or something else.
FYI - I've been able to successfully execute Transact-SQL statements
within the Execute SQL task, so I don't think the Execute T-SQL task
is even necessary for this purpose.
Hi
SQL server 2000 DTS Problem
I'm trying to pass the value of a global variable
as an input parameter in a 'execute sql task' DTS object.
However, SQL refuses to accept the global variable
assigned to the input parameter '?'. When you run the
DTS package the error message 'no value given for one or
more parameters' appears.
When you save / exit the DTS object by clicking OK, and then go
back into it, the 'input Global variables'
parameter field is empty again.
Searched msdn/knowledgebase to no avail - please help ! Thanks
Help much appreciated please !