Hi,
I've a report projects where each report has a number of columns and the spec is to have all the columns print-out on the same page. Is there a setting that will auto-scale these columns to fit to the page or will I have to edit the font size and widths manually on each report to fit to the page?
Thanks for any comments.
I have a subreport on my main report, and the subreport contains a matrix. When I run the report, the subreport seems to expand beyond the width of the main report. The matrix itself does not expand beyond the width of the body of the main report, but for some reason it seems that the subreport does. The subreport does not contain any headers that might be messing up the width. If I cut and paste the matrix from the subreport directly onto the main report, and remove the subreport, it prints fine. But as soon as I include the subreport on the main report it prints with blank pages because the subreport expands beyond the width of the body of the main report. I have checked the width and margins on the subreport and compared to the width of the main report and all looks good. Can anyone help?
Thanks.
I found the following paragraph while searching on here:
************************************************************************
You could easily set up a parameter for each column and then display that column conditionally based on the parameter.
For instance, if you have a column that displays First Name, you could have a parameter called DisplayFirstName. Then in design view you'd select the whole FirstName column and in the Visibility-Hidden property set it to :
=iif( Parameters!DisplayFirstName.Value = false, true, false )
This could easily become a big, unwieldy report, though, if you have a great number of dynamic columns. Also, The width of the report is set at design time, and it includes the width of all your columns, not just the visible ones. This could cause you some pagination problems.
************************************************************************
That is exactly my problem. I have lots of dynamic columns which causes the width of the report to be wide. Thus even though at run time the report only shows columns within a page, the report itself consists of a lot of white spaces after the selected columns. Does anyone know a solution to this? If not, I guess creating the rdl with code manually is the only way? Please advise. Thanks in advance.
- Will
I have a dataset for report builder 3 that has 8 fields. The data for the report needs to be grouped by the first field. The 2nd field is a string that describes the group field and this too needs to be on the same row as the group field. This 2nd field need nearly the full page width. The remaining 6 fields need to end up rendering below the first row. I can't figure out how to get report builder to put the first 2 fields on the first row and use the full page width.
View 0 Replies View RelatedI have like 100 columns and most of them work fine, but some will not work. I need to select the columns with correct width for fixed width flat file.
Here is typical SQL statment that works for most of them.
left(RTRIM(A.City) + Replicate(' ', 25) ,25) as [City]
The above one is not working, but many other works fine like the address. Why would it work for some, but not others?
It works fine if I use any char, but not space. i.e.
left(RTRIM(A.City) + Replicate('*', 25) ,25) as [City]
Is there a maximum width for fixed width column?
I'm trying to read in a flat file (which, admittedly, has one very wide column), and it keeps breaking because of truncation when it tries to read in the file.
Any ideas?
Jim Work
Hi,
I am trying to create a program that transfers tables to flat files.
At this point in time, I have suceeded in created one that creates delimited files.
However, I am now trying to create fixed-width files as you can do with the SSIS designer, but programatically.
Is there a way to programatically determine the width of a column from the source table? I can not seem to find any kind of function or member that stores this information or allows me to retrieve it.
I know what I need to change in order to set a width for a column, but I just don't know how to find the width without just asking the user to provide one.
Hello all,
When viewing a report, there is an option in the left corner for the size ie. 100%, 150%, page width, whole page etc from the dropdown list.
I was wondering is there a way to make the ''Page Width" option the default view for a particular report or site ?
Hi,
We have a ReportViewer control sitting inside a master page's content placeholder. All works fine except when I set the width and height to 100% rather than a fixed size in pixels. This is what we require, as we'd like the control to resize automatically along with the page.
I'm aware of a fix whereby you remove the doctype statement from the page's script, but this seems to have no effect on a page which is based on a master page.
Is there any other way we can get our ReportViewer to work in a 100% width/height mode?
Thanks for any help in advance,
Rich
I need to expand my page width and height. The report designer and report viewer allows me to do that. The expanded page does not export to the PDF Format. I am stuck width 6 1/4 x 8/12 for the PDF format. I am using the windows report viewer.
View 2 Replies View RelatedHi, everyone
There is a table t1 with two fields, such as,
ID NAME
１ Ｔｏｋｙｏ
2 Xian
3 America
For there are full-width and half-width strings in the values of the two fields, I can not select and get the right records. So I want to transform the two fields ID and NAME, I fail to find the function in the SQL Server 2005. Please give me some advice.
Thank you very much!
I'm not very familiar with sql server 2005, and am trying to create some reports for the first time. I created 4 fairly basic reports. Three of them work just fine. The fourth one is giving me fits. When I look at it in Visual Studio, it previews just fine - generates the correct data and everything. When I deploy it to report services, however, it gets squashed sideways, so that it is about three times too narrow. I've looked at both the body properties and the report properties, and they all appear ok when compared to the other three reports. The body width is set to 8.9 inches, and the report page size and interactive size properties are set to 8.6 inches.
Can anyone point me in the right direction, or am I going to have to start from scratch?
Thanks in advance...
Hi, This is because there are many columns need to display ,when users export to excel ,now they have to manually adjust the worksheet as one page . Therefore,as the title,can anyone help me?
View 3 Replies View RelatedDoes anyone know how to create a bar chart in which the x-axis is dynamic (meaning I can have 0+ bars) and have the width of the bar being a fixed size?
View 1 Replies View RelatedHi,
I have a very big report with 60 columns and some columns are invisible.
The problem is now if I have 30 columns that are invisible (hidden=TRUE), the report width still stays at 60 columns width, and the Horizontal scroll bar become very long and it just scroll to blanks.
I would like to know how to resize the report after it is generated?
Thanks.
Jon
Hi All,
We are having a table report which has set of columns where the visibility is made false based on report parameters. It works fine and the table automatically shrinks. But, the page width remains as early and has lot of blank space in it. It also causes printer to print many blank pages.
Is there a way to control pagewidth dynamically? Thought of adding a custom assembly to control page width - but how to access the page that is getting displayed. "this" will refer to the the assembly class instead of report as such.
Any help is highly appreciated.
Regards, kart
Hi,
I have a report which includes a subreport. I would like to position them in a vertical position so that they like like just one report.
I have placed them within a rectangle but there is still quite a vertical distance between them and I cannot find any margin properities to fix this.
Would appreciate any hints,tip & advice.
Thanks,
John
Has anyone found out how to dynamically create report width.
If I have 20 columns on a report all of 2cm, then report will be 40cm width.
If I display the columns based on specific criteria using the iif function and then setting the an expression for the Visibility Hidden property, the report could potentially reduce in width.
I cannot see how to build an expression for the report width or table width, to accommodate the potential change in the width of the report when columns are not shown, thus it pages incorrectly, leaving huge white space on the right of the report when columns are hidden... has anyone come across this requirement, and hopefully a solution for it?
Many Thanks people
Does anyone know how to control the width of the parameter dropdownlist? If you select "Multi-value" for the parameter (non-sp1 version) the parameter list is in a dropdownlist that is manageable in size. If you do not use the multi-value parameter, it looks like the width of the dropdownlist is determined by the width of the longest text of the returned parameters.
Is there any way to control the width of the dropdown?
Thanks
Rob
I have a report that has a certain number of columns that are hidden and when hidden they leave a lot of white space. Is there a way to detect when they are hidden and set the width property to 0 and then reverse the value when they are visible?
View 1 Replies View RelatedHello,
I have a report where I'm showing a list of users to select.
When previewing the report, the width of the field is automatically set to the largest label in the dropdown list.
But when I change the parameter to have "Multi-Values", then the width is set to a fixed value and a horizontal scrollbar appears.
Does anyone know how to have a "Multi-Values" parameter, but keeping the lasgest width of the labels in the dropdown list ?
Thanks in advance
Will the width property of a column be able to be set at run-time (i.e. ability to set the width of a column to an expression) in SQL Reporting Services 2008? One problem I have seen is the inability to set the width of columns in a report when you you have several columns whose order is determined based on parameters.
Lets say I have 2 columns in a report and two fields from the database which will populate those columns: 1 field that is varchar(5) and one which is varchar(50). If I do not know which column each field will go to until runtime how am I supposed to adjust the column width? Letting the column width be set by an expression would solve everything as I could pass the width in to the report. As it stands now, I would have to set each column's width to accomodate a field of type varchar(50) in order to avoid wrapping of data.
You could say just create 2 reports, one for each case, but what if I had 15 fields? 20?how to dynamically set the width of a column? Will the width of a column be able to be set at run-time in SQL Server Reporting Services 2008 via expression or some other means?
Hi Every1, I'm getting this error.
'Cannot specify a column width on data type smalldatetime.'
I'm using SQL Server & I've check the data type in the db & it's same as smalldatetime.
Any suggestions would be highly appreciated.
Thanks
<Error>
Column or parameter #8: Cannot specify a column width on data type smalldatetime.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Column or parameter #8: Cannot specify a column width on data type smalldatetime.
Source Error:
Line 344: Try
Line 345: myConnection.Open()
Line 346: dgdSearch.DataSource = myCommand.ExecuteReader()
Line 347: dgdSearch.DataBind()
Line 348: Finally
Source File: c:inetpubwwwrootDemo Equip LogSearch Equipment.aspx.vb Line: 346
Stack Trace:
[SqlException: Column or parameter #8: Cannot specify a column width on data type smalldatetime.]
System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream) +742
System.Data.SqlClient.SqlCommand.ExecuteReader() +41
Demo_Equip_Log.Search_Equipment.BindGrid() in c:inetpubwwwrootDemo Equip LogSearch Equipment.aspx.vb:346
Demo_Equip_Log.Search_Equipment.Page_Load(Object sender, EventArgs e) in c:inetpubwwwrootDemo Equip LogSearch Equipment.aspx.vb:195
System.Web.UI.Control.OnLoad(EventArgs e) +67
System.Web.UI.Control.LoadRecursive() +35
System.Web.UI.Page.ProcessRequestMain() +750
Hello,
How can I change the width of my comboboxes etc in SQL Enterprise Manager ?
I can't see which table I'm supposed to be updating and it's causing me huge problems.
(basically my fields are called things like Staging_EmployeeDetails etc)
I'm on a 17" monitor with a resolution of 1280 x 1024 so this shouldn't be an issue, and all screens are maximized.
I've tried dragging the corners of the window, but it doesn't seem to let me.
As an example, I'm in the export wizard and I can't tell which rowto use when I query the data (See screenshot)
Hello :
It is possible to define the width of the cells of table dynamically (not Statics)?
Thank's.
I have a request to produce a SQL report that will be produced with fixed column width. For example see below Position Element LengthField Format 1-2 Column1 2 Alphanumeric 3-4 Column2 2 Alphanumeric 5-13 Column3 9 Chars Any idea how I can produce the report specified above? Thanks
View 1 Replies View RelatedHi
When i create a temp table with a field as blank string as in following example and then try to insert a blank string int it following error is coing.
compatibility level of database is 70
following is the example
Select CtpId = convert(int, a.CtpId), a.OrgId, a.Sname, a.Intls, a.Prfx, a.CallName, a.Sex, a.RspblEmp,
City = convert(char(40), ''), OrgDescr = convert(char(46), ''),
a.ActvtyStatus, a.Sales, a.SaleCntct, a.ContractCntct, a.ContractSigner,
a.CRW, a.WkndCntct, a.UseOrgAddr, CtpTimeStamp = convert(int, a.TimeStamp), FrequentFlyer = convert(bit,0) ,
a.PrevCmpl, b.St, a.DtIns
into #Ctp
from tbCtp a, tbAddr b
where 0 = 1
Select a.CtpId, a.OrgId, a.Sname, a.Intls, a.Prfx, a.CallName, a.Sex, a.RspblEmp,
City = '', OrgDescr = '',
a.ActvtyStatus, a.Sales, a.SaleCntct, a.ContractCntct, a.ContractSigner,
a.CRW, a.WkndCntct, a.UseOrgAddr, CtpTimeStamp = convert(int, a.TimeStamp),FrequentFlyer = 0, a.PrevCmpl,
St = "", a.DtIns
into #CTP
from tbctp a
where a.Sname like 'as%'
and CallName = '%'
ERROR MESSAGE:: Server: Msg 2731, Level 16, State 1, Line 1
"The width of column 'City' is 0. This width is not valid."
Please tell why this error is coming.
Thanks in advance
Rajesh
Is there a way to change the width of the bars in a bar chart?
I know that there is an option to 'Plot the data as line', but for some reason this is greyed out.
Any ideas on both?
I have been looking over the forums looking for answers to the question that nails us all: how do you dynamically resize column widths? MS says: you don't. However, I have heard many people say they have found ways around it. I wonder if anyone might share those with me (and everyone else). Share the wisdom you have gained with those less experienced!
View 1 Replies View Related
Folks,
We have some reports that have optional columns. We have them working very nicely, with the column showing or hiding based on values in the report -- works great.
Except -- when the columns are present, the report spans onto two pages, when exported to PDF, in width. That's understandable, as there's a lot of extra data, and exactly what we want. However, when the columns are not present, we get empty pages instead, because the report doesn't automatically contract back onto the size that fits on one page.
Changing the report to a Matrix won't work, as the hidden columns on some of these come as sets of three, where each column in the three has different formatting (different widths, format codes, etc).
Thanks!
--randy
Hi
I want to read out the max width of a nvarchar field of a resultset. Is this possible?
Hi,
May I know is there a way to control the size of the parameter drop down box? In my current box, the width increase according to the option with label of the longest length, in which causes my report's width to increase out of my control.
Thanks in advance!
Hi,
I have a matrix object in a report that sometimes runs off the side of the page based on the underlying data. Essentially if there are more than 11 columns it stretches out my page.
How can I fix this? Ideally, I would like to show only the Top 11 results but cannot seem to figure out how (or where, or on what data element) to properly set a filter.
Thanks.
Brad