Schedule Task Failure In SQL 6.5
Mar 12, 2001
I am having a problem with the scheduled task I am running. There had been an error message 5702 which says "The SQL Server is terminating this process". I don't understand what this means. And if I try to force the job to run, it says that the SQLExecutive service is not running on the particular server. And this prevents the task from being run. But when I try to check for the said service, it is running. I don't know what is happening here. Please help me.
View 1 Replies
ADVERTISEMENT
Feb 2, 2000
is it posible to change a file name usinging schedule task??
I used this syntax
Exec xp_cmdshell "REN
E:Elsie_DB_db_dump*.* E:Elsie_DB"
Is there another way of doing it??
View 3 Replies
View Related
Apr 20, 1999
Does anyone know of any way to schedule a task using only transact sql, or is using Enterprise Mgr the only way to do this?
View 1 Replies
View Related
Sep 21, 2006
I want to schedule the task using contro panel schedule task item.
I want to run two package in sequence. If the execution of one gets over then other should start.
I have configured the execution detail in BAT file.
I know how to schedule the task. But can anyone please suggest me how to schedule the task in sqeuence i.e. execution of BAT file in sequenece (one after other).
View 4 Replies
View Related
Jan 16, 2001
I've been running SQL Server for 5 years now and have not seen the following.
We have a scheduled night run task where we do various maintenance functions as well as print out the issued insurance policies for the day. All indications are that the run completed except that I did not get an email notification of success or failure.
When I went to enterprise manager, under jobs the night run seems to be stuck in the mode of "Performing completion actions". I cannot get it our of this mode back to "Not running". Trying to stop the task has no effect.
Any ideas/suggestions??
Thanks in advance.
Cheers,
Mike Byrd
Information Systems Manager
Texas Windstorm Insurance Association
Austin, Texas
View 6 Replies
View Related
Jan 15, 1999
Hi All, I am using SQL Server 6.5 for our database server. We will run couple schedule tasks in the SQL Server everyday.
One of the task that will call a BATCH file in C:. In this batch file, it will copy some files, and zip then. Then It iwll launch
the Internet Explorer, and run a ASP program. In the ASP program, it will send out a E-Mail and then close the browser. It
works fine until this Monday. The "Schedule Task" runs on time, and do the "copy" & "zip". But it will not launch the IE,
stuck on there. I check the IE that is launched but it runs in the background. The ASP program is not running too. I used the
"notepad" instead of the IE. The result is that the batch file runs, and the "Schedule Task" will finish. But the "notepad" didn't launch.
If I just "double click" the batch file, it runs fine. So the problem is between the SQL server "Schedule Task" and the WINDOWS NT, I guess.
Has any one has a clue, please tell me. Thanks.
View 1 Replies
View Related
Oct 20, 2006
Hi All,
Is Vista get rid of the task scheduling? We can schedule a task easily through the Scheduled Task under control panel, but I cannot find similar stuff in Vista.
Can anyone tell me if schedule a task is still available in Vista? If yes, where can I do that?
Thakns in advance!
Gordon
View 3 Replies
View Related
Dec 22, 1998
Hi every one,
I have a stored procedure which activates a task when ever that sp is called.
and this procedure gets out of the loop.
the task get started running.
Is there any way in Sql server that the same stored procedures should wait until the Task finishes and return a code either 1 or 0 for success or faliure of the task.
Help is greatly appericated
Jeswnath
View 1 Replies
View Related
Apr 13, 2008
Hi there
I am trying to copy what is happing in "Schedule Task" on Windows and put into database design below. It's a denormalisation though.
What is the better way to handle this schenario such as DAILY, WEEKLY AND MONTHLY TASK? I did try put into normalisation by adding extra table called ScheduleDetail which holds DAYS and MONTHLY but it's more complicated.
Anyway .. I am waiting your comment or anything.
CREATE TABLE [dbo].[glb_Schedules](
[ScheduleID] [bigint] IDENTITY(1,1) NOT NULL,
[ScheduleGroupID] [bigint] NULL,
[ScheduleTypeID] [int] NULL,
[StartTime] [smalldatetime] NULL,
[EndTime] [smalldatetime] NULL,
[Length] [int] NULL,
[IsMonday] [bit] NULL CONSTRAINT [DF_glb_Schedules_IsMonday] DEFAULT ((0)),
[IsTuesday] [bit] NULL CONSTRAINT [DF_glb_Schedules_IsTuesday] DEFAULT ((0)),
[IsWednesday] [bit] NULL CONSTRAINT [DF_glb_Schedules_IsWednesday] DEFAULT ((0)),
[IsThursday] [bit] NULL CONSTRAINT [DF_glb_Schedules_IsThursday] DEFAULT ((0)),
[IsFirday] [bit] NULL CONSTRAINT [DF_glb_Schedules_IsFirday] DEFAULT ((0)),
[IsSaturday] [bit] NULL CONSTRAINT [DF_glb_Schedules_IsSaturday] DEFAULT ((0)),
[IsSunday] [bit] NULL CONSTRAINT [DF_glb_Schedules_IsSunday] DEFAULT ((0)),
[IsJanuary] [bit] NULL CONSTRAINT [DF_glb_Schedules_IsJanuary] DEFAULT ((0)),
[IsFebruary] [bit] NULL CONSTRAINT [DF_glb_Schedules_IsFebruary] DEFAULT ((0)),
[IsMarch] [bit] NULL CONSTRAINT [DF_glb_Schedules_IsMarch] DEFAULT ((0)),
[IsApril] [bit] NULL CONSTRAINT [DF_glb_Schedules_IsApril] DEFAULT ((0)),
[IsMay] [bit] NULL CONSTRAINT [DF_glb_Schedules_IsMay] DEFAULT ((0)),
[IsJune] [bit] NULL CONSTRAINT [DF_glb_Schedules_IsJune] DEFAULT ((0)),
[IsJuly] [bit] NULL CONSTRAINT [DF_glb_Schedules_IsJuly] DEFAULT ((0)),
[IsAugust] [bit] NULL CONSTRAINT [DF_glb_Schedules_IsAugust] DEFAULT ((0)),
[IsSeptember] [bit] NULL CONSTRAINT [DF_glb_Schedules_IsSeptember] DEFAULT ((0)),
[IsOctober] [bit] NULL CONSTRAINT [DF_glb_Schedules_IsOctober] DEFAULT ((0)),
[IsNovember] [bit] NULL CONSTRAINT [DF_glb_Schedules_IsNovember] DEFAULT ((0)),
[IsDecember] [bit] NULL CONSTRAINT [DF_glb_Schedules_IsDecember] DEFAULT ((0)),
[DateCreated] [datetime] NULL CONSTRAINT [DF_GLB_ScheduleDetails_DateCreated] DEFAULT (getdate()),
[LastDateModified] [datetime] NULL CONSTRAINT [DF_GLB_ScheduleDetails_LastDateModified] DEFAULT (getdate()),
[IsActive] [bit] NULL CONSTRAINT [DF_GLB_ScheduleDetails_IsActive] DEFAULT ((1)),
CONSTRAINT [PK_GLB_ScheduleDetails] PRIMARY KEY CLUSTERED
(
[ScheduleID] ASC
)WITH (PAD_INDEX = OFF, IGNORE_DUP_KEY = OFF) ON [PRIMARY]
) ON [PRIMARY]
View 4 Replies
View Related
Mar 8, 2000
Hello:
I am running an application on mssql 6.5, sp 4 on NT 4.0.
We routinely chnage paswords for the sa login. One loophole for users to
learn the sa password is in scheduler tasks underr EM when a task is
added to run under cmdexec, the password is written in text under the -P
paramater.
1) Is there any way to encrypt the password there or does any one have a
stored procedure or function to do s?
1) Which executible, if any, runs the scheduled tasks under EM? Is this
part of EM or is there any specific executible that runs the scheduled
tasks?
Any information oyu can provide or suggestions you cna make will be
appreciated.
Thanks
David Spaisman
View 1 Replies
View Related
Sep 24, 2013
I want to take a sql server 2005 database backup on task schedule every 1 hour is that possible.
View 1 Replies
View Related
Jun 7, 2015
Is it possible to create a SQL schedule task to execute after 5days from the 28th of every month.
View 3 Replies
View Related
Sep 5, 2000
Hi,
I want to know if it's possible to retrieve what kind of error have occurred when the on Failure workflow is execute in a DTS package.
Martin
View 1 Replies
View Related
Oct 18, 2005
We are unable to get a file from a VMS FTP site. The specific error message is:
View 5 Replies
View Related
Oct 15, 2007
Hi all,
I have set up a package that copies data from one server to another server, then delete the data from the source tables. Now I want to add a task where it asks if the copying data was successful, then delete the data, ELSE stop the package and give an error msg, or some kind of a roll back so I don't delete the data without copying it to the destination server.
So what I want to ask is is that possible using Execute SQL task to write the script? if not how do I approach to it?
And I need some help with the roll back script as well..( IF previous task fails ..... ELSE Go on to the next task )
any help is appreciated!
MODERATOR COMMENT: Please don't wipe out your posts.
View 4 Replies
View Related
Oct 20, 2004
How do I set an On Failure when a Tranform Data Task fails? I'm pulling in a text file and if the set the On Failure for the text file connection it says "Defining precedences between the selected items is not valid", and if I set the On Failure for the database connetion is doesn't execute when the tranform data fails. Any ideas on how capture this error?
View 3 Replies
View Related
Apr 4, 2007
i use email task and it dosent send an email at all....this task causes an error..
If i need to set up email for the package if the package fails...
or how should i set in the sql server agent...iknow there is an option there but i dont know how to..
Please let me know...
View 18 Replies
View Related
Apr 26, 2007
Hi,
I tried to set up the send Mail Task and got the following message, however can't receive any message:
SSIS package "Package.dtsx" starting.
Error: 0xC002F304 at Send Mail Task, Send Mail Task: An error occurred with the following error message: "Failure sending mail.".
Task failed: Send Mail Task
SSIS package "Package.dtsx" finished: Success.
The program '[3628] Package.dtsx: DTS' has exited with code 0 (0x0).
Can somebody tell me why?
Thanks,
View 1 Replies
View Related
Sep 12, 2006
Hello,
When I run my package, a task will fail, however, the package will claim that it was successful. Why is this, and how can I trigger a failed package when one task fails?
Thanks in advance.
View 4 Replies
View Related
Aug 16, 2004
In my DTS package, is there any way to pass the task name and error description to another task that gets called on the task's failure?
View 1 Replies
View Related
Sep 25, 2007
Hi,
The send mail task in ssis was failing with following error
[Send Mail Task] Error: An error occurred with the following error message: "Failure sending mail.".
Progress: The SendMail task is completed. - 100 percent complete
Task Send Mail Task failed
The firewall for SMTP server was opened.
And successful in sending mail using Database Mail task from the sql server
Do any one have idea why this difference is? Do any one ever faced similar issue?
One reason I could found is McAfee virus scan policy is stopping the SSIS Send mail task.
(source: 9/25/2007 9:00:04 AM Blocked by port blocking rule C:Program FilesMicrosoft SQL Server90DTSinnDtsDebugHost.exe Anti-virus Standard Protection : Prevent mass mailing worms from sending mail 10.237.5.105:25)
Thanks
View 12 Replies
View Related
Jan 10, 2008
I have written an SSIS package with a Transfer SQLServer Objects task which I want to use to copy database objects from a SQL Server 2000 database to SQL Server 2005.
When I run this task, I find the following error:
[Transfer SQL Server Objects Task] Error: Execution failed with the following error: "Version80 database compatibility level is not supported
Is there a way around this aside from changing the compatibility level of my SQL Server 2005 database?
Any help is much appreciated.
View 5 Replies
View Related
Dec 2, 2006
Hi,
I am developing an SSIS package and need the execution of the package to continue even if one of the tasks within the package fails. I have an OnError event handler for this task which fires when it fails but want the rest of the package to continue.
Any suggestions greatly appreciated.
Thanks
View 4 Replies
View Related
Jan 29, 2008
I've got a couple of backup database tasks setup to run one after the other. The are set up the same, Alldatabases, backup to a device each, and overwrite every time. The task on databases full works fine but the one on logs fails every time, right away with the following rather esoteric error pulled from logging in the event log.
Event Type: Error
Event Source: SQLISPackage
Event Category: None
Event ID: 12550
Date: 29/01/2008
Time: 09:54:11
User: OILCATSsqlservice
Computer: GUNKVBPROC
Description:
Event Name: OnError
Message: The Execute method on the task returned error code 0x80004003 (Object reference not set to an instance of an object.). The Execute method must succeed, and indicate the result using an "out" parameter.
Operator: OILCATSSqlService
Source Name: Back Up Database Task 1
Source ID: {BF117128-FB4C-470D-AC00-4C68797C2C97}
Execution ID: {450BA60C-2EBF-453B-B3E4-80FBC2042F83}
Start Time: 29/01/2008 09:54:11
End Time: 29/01/2008 09:54:11
Data Code: -1073594108
What is this elusive Execute method that is only relevant to the log aspect of this task?
View 2 Replies
View Related
Nov 2, 1999
I'm "trying" to set up Replication. The Publishing/Distribution server is in one domain, and the subscribing server is in another. Both domains are fully trusted.
The synchronization step builds the .tmp file, but the repl_subscriber Distribution task bites the dust with an error message, "28000[Microsoft][ODBC SQL Server Driver][SQL Server] Login failed".
The setting on the distribution options dialog box is ODBC, SQL Server. I'm not using a special login/password. I've even tried putting a user name and password there, and it doesn't work. The ODBC connections test out fine on both servers. Any suggestions where I've gone wrong?
Thanks,
Layne
View 3 Replies
View Related
Apr 18, 2006
I have a relatively simple SSIS package that I'm building for a data mining process. The package starts with an OLE DB data source, passes the results of a SQL Command (query) along to a conversion step, which then gets sent to a Term Lookup task. The Term Lookup then writes the result to an OLE DB Data Destination. Pretty simple. The OLE DB data source query returns about 80,000 rows if you run it through SQL WB. The SSIS editor shows 9,557 rows make it out of the source, and into the conversion step, 9,557 make it out of the conversion and into the lookup, and about 60,000 rows make it out of the lookup and are written to the results table. Then the package fails with the following errors listed on the progress screen. I was assuming that the 9,557 was some type of batching that was occurring in the process, but now I'm not so sure.
Thoughts?
Frank
[DTS.Pipeline] Error: The ProcessInput method on component "My Component" (117) failed with error code 0xC02090E5. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
[DTS.Pipeline] Error: Thread "WorkThread0" has exited with error code 0xC02090E5.
[DTS.Pipeline] Error: Thread "WorkThread1" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
[DTS.Pipeline] Error: Thread "WorkThread1" has exited with error code 0xC0047039.
[My Data Source Error: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
[DTS.Pipeline] Error: The PrimeOutput method on component "My Component" (1) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
[DTS.Pipeline] Error: Thread "SourceThread0" has exited with error code 0xC0047038.
View 2 Replies
View Related
Feb 17, 2007
I'm perplexed and in need of a sanity check ...
Instance of SQL2K5-SP1 on Server2003R2. Created two databases Test1 and Test2, create single 2-column table (tblTest)in Test1 with one row of data. Create SSIS package to transfer the table and its data to database Test2 using "Transfer Objects Task". Fails with error code 1073548784.
I have tested for security issues and don't beleive these to be the cause: I have monster privelidges and can successfully use SSIS packages to execute CREATE TABLE etc.
Have also tried most combinations of Task options (eg COPY ALL OBjects etc etc)
Have tried this on three different servers: same results.
This simple test is the result of distilling down problems I'm having with SSIS manipulating some 60G within some 300 tables, so I'd really like to use the power this task promises!
My head is getting a little sore from scratching - any advice gratefully received.
Thanks
View 6 Replies
View Related
Sep 10, 2007
Hello All
I was trying to insert some row from one table to another of different database.
I was using Execute SQL task along with Foreach loop container.
In my execute SQL task I am using this query
SET IDENTITY_INSERT dbo.Table1 ON
INSERT INTO dbo.Table1
SELECT * FROM DB2.dbo.Table2
WHERE TableKey = ?
When executed I get this error:
failed with the following error: "Syntax error, permission violation, or other nonspecific error". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
While the same query when executed in Management Studio Its successful.
The properties I set
For Each Loop Editor Settings:
1) Collection: a) Enumerator Set to ForEach ADO Enumerator
b) ADO Object Source Variable: User:bjectVariablename
c) Checked Rows in the first table
2) Variable Mapping: New Int Variable2 and Index = 0 to set it to first colunm.
3) Expression: Left blank
Execute SQL Task Editor:
1) General: a) Timeout : 0
b) CodePage: 1252
c) Result Set: None
d) SQLSourceType: Directinput
e) SQL Statement: SET IDENTITY_INSERT dbo.Table1 ON INSERT INTO dbo.Table1 SELECT * FROM DB2.dbo.Table2 WHERE TableKey = ?
f) BypassPrepare: False
2)Parameter Mapping: Variable Name : New Integer variable2 selected
Direction: Input
DataType: Long
ParameterName: 0
Can somebody help me in this regards.
Reference:
a) http://www.whiteknighttechnology.com/cs/blogs/brian_knight/archive/2006/03/03/126.aspx
View 10 Replies
View Related
Jun 4, 2007
Hi,
I am using an XML task for validating the XML data against the XML Schema. Let me describe the scenario, I am working on.
I have XML Files with different schema. I have different XSD files for each XML file type. I have used a for loop container which has a script task and an XML task. Script task gets the XML File and XSD file contents into variables which are, in turn, used by XML Task for validation.
XML task is configured in the option "Validate". I have provided the XML Data in variable and XSD file content in other variable. XML Task stored the result in another variable. FailOnValidationFail property set to false.
Every thing works fine until result of XML Task is false. If XML Task fails for one of the files, it fails for each subsequent files. If first file does not compile to schema and other files do, then XML task fails all the files because first file failed.
Is this a problem with XML Task or I have missed any property. Please, guide me through.
View 3 Replies
View Related
Mar 23, 2008
i have a package that contains a foreach loop container, in this container i have sql tasks, and execute package tasks, that end with a send mail task. if there something wrong with the smtp server, or it's down, the send mail task fails the package.
i don't want this to happen, what i want that if the send mail taks fails, the package will continue it's execution.
--i thought of using the event handler... but i don't know if it works...
thank you for any help!!!
View 5 Replies
View Related
Feb 14, 2008
Please excuse my ignorance as I'm a complete noob when it comes to vb.net.
I have 2 script tasks, each connected to an upstream task via Success and Failure constraints. Each script assigns a value to a variable, depending on whether the task succeeds or fails.
My code thus far is:
Code Snippet
Public Sub Main()
Dts.Variables("strEmailBody").Value = _
"Business Model Reporintg Control Complete - Status = Success"
Dts.TaskResult = Dts.Results.Success
End Sub
What i want to do is use a single script task depending on the success or failure of the package, setting the variable value accordingly.
If there are no errors Then
"Success"
Else
"Failure"
I've tried
Code SnippetIF CBool(Dts.Results.Success) Then...
But whislt it compiled, didn't evaluate correctly during runtime.
Can anyone suggest where I'm going wrong? Again I'm totally new to .net and I'm surprised I've gotten this far!
Thanks in advance.
Leigh
View 5 Replies
View Related
Mar 26, 2015
I have multiple task flows with precedence constraints and i have changed the constraint as completion to execute the package even though there is failure in one of the tasks in the package but every time the send mail success is executed instead of Send mail Failure task.
View 0 Replies
View Related
Dec 7, 2006
I am looping through xml files and validating them with the XML Task. On sucess I want to perform task 2, on failure I want to perform task 3. When one file fails to validate all subsequent tasks fail.
I have also tried putting the result in a variable instead of using the success constraint. I get the same result, the variable keeps the failed value after the first file fails. Any advise is greatly appreciated.
View 7 Replies
View Related
