I want to schedule a job to run nightly where a remote mysql database is imported into a local sql server db. I ran through the wizard for scheduling a job, previewed my table data, and viewed the scheduled job in the DTS queue. However, the job never runs. I can't figure out why.
Anyone have any idea why? Is there a step-by-step process somewhere for doing this?
Thanks,
C
How would I import a database in SQL 2005 that was sent to me from a mysql database?
Thank you
Hi all,I am developing a web application and the back end is MySQL database.
Now I want to shift all the data to SQL Server 2005.
Is there any method to do it?
Thanks
Tomy
I need to import data to mysql,
and idea abt that?
thanks
Hi msdn forum members,
I need to import data from another server using Express edition every minute.
So I ran the import wizard, and I saved the packaged on the hard drive.
Then when I try to make a new job and new schedule for scheduling, I can't seem to find SQL server integration service option for the Type.
does anybody have any idea why I can't see SSIS there or had the same problem??
Or is there another way of importing data every minuite other than this?
BTW my server is 2005 standard edition.
Thanks in advance,
Mike Kim
problem is I don't have unfettered access to the MS SQL Server(7), so I need to send instructions on how to do it to a client.
After reading up a little, I figured "select view into ##tmp_table", and then dump the table, which, if I'm right, means I'll have an SQL dump that I can quite easily import into MySQL.
Problem,: What's the syntax to dump that temp table, or is there a better way to import the data into MySQL
TIA
I have connected to my mysql db with myodbc. When I start importing I get errors on some varchar variables.
Some of my varchar(255) becomes varchar(-1) when I import. When this happens smssql fails to create table.
Anyone have a clue?
Thanks.
Getter..
Hi All
I'm trying to import data from mySQL database to SQL server 2005. I installed mySQL odbc driver (3.51) and configured system DSN. However when I start SQL server import/export wizard mysql is not an option in data source dropdown.
What do I miss?
Thanks,
Vlad.
Hello everybody,
I'm a new SQL2005 user.
I'm
trying to import data from MySQL version 5x into my SQL2005 by wizard.
I created a DNS file and tested successfully using MySQL Connector/ODBC
v5.
Everthing seems fine but at the last step selecting data
source. The SQL2005 wizard forced me to choose using SQL command option
instead of selecting tables/views from a list. Anyone can tell me why?
My collegues faced the same case as they help me to find the reason.
I'm sure that there are a few source objetcts in MySQL source.
Any help will be appreciated!!!
khanhmy
I'm new to DTS packages, but managed to create one that successfully empties a table in SQL Server then imports data from a Foxpro file on another server into it. It runs fine if I execute it from DTS, but fails if I schedule it to run in SQL Server Agent (using the "Schedule Package" option in DTS). I think the relevant portion of the error returned when the job fails is:
Error string: [Microsoft][ODBC Visual FoxPro Driver]File 'hrpersnl.dbf' does not exist.
The file does exist. I also tried to execute it from a stored procedure, but got a similar error. Any thoughts on why it runs one way but not the other?
TIA
Hi,
I am running SQL Server 2005 and have built a simple SSIS package to import data from an oracle database to my SQL Server 2005 database. When I run it in SSIS, it works and it imports just fine. When I schedule it, it gives me problems. Help!
It might be a problem with Oracle Provider client I installed. Is there a client version I can download and install? the one I downloaded from oracle doesn't work. I bet i did something wrong though.
Here is my version:
Microsoft SQL Server Management Studio 9.00.2047.00
Microsoft Analysis Services Client Tools 2005.090.2047.00
Microsoft Data Access Components (MDAC) 2000.086.1830.00 (srv03_sp1_rtm.050324-1447)
Microsoft MSXML 2.6 3.0 4.0 6.0
Microsoft Internet Explorer 6.0.3790.1830
Microsoft .NET Framework 2.0.50727.42
Operating System 5.2.3790
Microsoft Visual Studio 2005
Version 8.0.50727.42 (RTM.050727-4200)
Microsoft .NET Framework
Version 2.0.50727
Installed Edition: IDE Standard
SQL Server Analysis Services
Microsoft SQL Server Analysis Services Designer
Version 9.00.2047.00
SQL Server Integration Services
Microsoft SQL Server Integration Services Designer
Version 9.00.2047.00
SQL Server Reporting Services
Microsoft SQL Server Reporting Services Designers
Version 9.00.2047.00
Thanks,
Ryan
Can anybody tell how to import a table with the text column from SQL Server 2000 to MySQL 4.0.17?
I tried this using ODBC connection but got an error message saying, "Query-based Insertion or updating of BLOB values is not supported".
I'm trying to use linked server to import big amount of data(around 9 million rows) from mysql to a sql 2005 table.
I plan to create a stored procedure and use job agent to run it at off-peak time everyday. The SP is like:
.....
Truncate table sqltblA;
Insert Into sqltblA(col1, col2, col3)
Select col1, col2, col3
From OpenQuery('mysql', 'Select col1, col2, col3 From mytblB')
.....
But when I tried to CREATE the above SP from management studio, seems the sql server was trying to get all data from table mytblB and ended up with failure after several minutes hang. The error message is sth. like "running out memeory". BTW, during that several minutes hang, I can't query mytblB using mysql's tool as well. it seems to me that table got locked.
However if i try to change the returned result to 100,000 rows by changing script to
Insert Into sqltblA(col1, col2, col3)
Select col1, col2, col3
From OpenQuery('mysql', 'Select col1, col2, col3 From mytblB Limit 100000')
The SP could be created without any problem and running the SP could get the data in table sqltblA.
But that's not what I want, I need all rows instead of a certain amount of rows.
Does anyone know what's going on there when I try to CREATE that SP and any solution to it?
Plus I tried to use SSIS as well. When I'm configuring the DataReader source, which uses ADO.NET's ODBC option to connect to mysql, if its sqlcommand is "select * from mytblB" without the Limit key word, then the configuration page will hang there as well and table mytblB is not accessible by using mysql tool. I'm just sick of wasting time on that and that's why I chose to use SP istead of SSIS. But same result. :-(
I am trying to simplify a query given to me by one of my collegues written using the query designer of Access. Looking at the query there seem to be some syntax differences, so to see if this was the case I thought I would import the database to my SQL Server Developer edition.
I tried to start the wizard from within SQL Server Management Studio Express as shown in one of the articles on MSDN which did not work, but the manual method also suggested did work.
Trouble is that it gets most of the way through the import until it spews forth the following error messages:
- Prepare for Execute (Error)
Messages
Error 0xc0202009: {332B4EB1-AF51-4FFF-A3C9-3AEE594FCB11}: An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft JET Database Engine" Hresult: 0x80004005 Description: "Could not start session. Too many sessions already active.".
(SQL Server Import and Export Wizard)
Error 0xc020801c: Data Flow Task: The AcquireConnection method call to the connection manager "SourceConnectionOLEDB" failed with error code 0xC0202009.
(SQL Server Import and Export Wizard)
Error 0xc004701a: Data Flow Task: component "Source 33 - ATable" (2065) failed the pre-execute phase and returned error code 0xC020801C.
(SQL Server Import and Export Wizard).
There does not seem to be any method of specifying a number of sessions, so I don't see how to get round the problem.
Does anyone know how I can get the import to work?
Good Morning
Has anyone successfully used cherry's oledb provider for MYSQL to create a linked server from MS SQLserver 2005 to a Linux red hat platform running MYSQL.
I can not get it to work.
I've created a UDL which tests fine. it looks like this
[oledb]
; Everything after this line is an OLE DB initstring
Provider=OleMySql.MySqlSource.1;Persist Security Info=False;User ID=testuser;
Data Source=databridge;Location="";Mode=Read;Trace="""""""""""""""""""""""""""""";
Initial Catalog=riverford_rhdx_20060822
Can any on help me convert this to corrrect syntax for sql stored procedure
sp_addlinkedserver
I've tried this below but it does not work I just get an error saying it can not create an instance of OleMySql.MySqlSource.
I used SQL server management studio to create the linked server then just scripted this out below.
I seem to be missing the user ID, but don't know where to put it in.
EXEC master.dbo.sp_addlinkedserver @server = N'DATABRIDGE_OLEDB', @srvproduct=N'mysql', @provider=N'OleMySql.MySqlSource', @datasrc=N'databridge', @catalog=N'riverford_rhdx_20060822'
GO
EXEC master.dbo.sp_serveroption @server=N'DATABRIDGE_OLEDB', @optname=N'collation compatible', @optvalue=N'false'
GO
EXEC master.dbo.sp_serveroption @server=N'DATABRIDGE_OLEDB', @optname=N'data access', @optvalue=N'true'
GO
EXEC master.dbo.sp_serveroption @server=N'DATABRIDGE_OLEDB', @optname=N'dist', @optvalue=N'false'
GO
EXEC master.dbo.sp_serveroption @server=N'DATABRIDGE_OLEDB', @optname=N'pub', @optvalue=N'false'
GO
EXEC master.dbo.sp_serveroption @server=N'DATABRIDGE_OLEDB', @optname=N'rpc', @optvalue=N'false'
GO
EXEC master.dbo.sp_serveroption @server=N'DATABRIDGE_OLEDB', @optname=N'rpc out', @optvalue=N'false'
GO
EXEC master.dbo.sp_serveroption @server=N'DATABRIDGE_OLEDB', @optname=N'sub', @optvalue=N'false'
GO
EXEC master.dbo.sp_serveroption @server=N'DATABRIDGE_OLEDB', @optname=N'connect timeout', @optvalue=N'0'
GO
EXEC master.dbo.sp_serveroption @server=N'DATABRIDGE_OLEDB', @optname=N'collation name', @optvalue=null
GO
EXEC master.dbo.sp_serveroption @server=N'DATABRIDGE_OLEDB', @optname=N'lazy schema validation', @optvalue=N'false'
GO
EXEC master.dbo.sp_serveroption @server=N'DATABRIDGE_OLEDB', @optname=N'query timeout', @optvalue=N'0'
GO
EXEC master.dbo.sp_serveroption @server=N'DATABRIDGE_OLEDB', @optname=N'use remote collation', @optvalue=N'false'
Many Thanks
David Hills
Hello
I am trying to recreate a MySQL database on a new domain. The original database was exported into about 40 .SQL text files. I am importing these .SQL text files into a new database using phpmyadmin. When I attempt to import the first of these files, I get a "fatal error". It says the upload time has exceeded the 300 second limit. How do I set up the server so there is no upload time limit? Or how would you approach a solution to this problem? There are about 40 of these text files and each file varies in size between 5 and 15mb. Is it possible to split individual files in half or 3 parts and import that way? Any help would be greatly appreciated. Thanks!!
Hi, I have been using Microsoft Access for a couple of years and we have just switched to SQL Server. However, I'm having problems querying the Mysql databases our company has in place. I have managed to establish connections in the Visual Studio but can't seem to link tables from two different databases like I could in Access. Is this possible? Also, is it possible to connect to the mysql database via management studio? Apologies for my complete lack of knowledge!
View 4 Replies View RelatedI am currently trying to complete part of my A-level coursework but am stuck.
i am creating a website for a restaurant on which customers can submit information to do with four areas:
---------------------
Bookings
Comments
Job Applications
Pre-order
----------------------
i have used access alot in the past and had no problems creating a running model of my final database.
i have built my website and created the four tables in the alloted MySQL area that came with my website package.
BIG QUESTION:
how do i create the interface for people to submit data and for it to be sent to my database?
i am a complete beginner to MySQL using it for the first time this week so im not sure what i need to do in the slightest to solve this issue
-------------
any help or advice would be VERY VERY gratefull
We have SQL Server 2000 on a Windows 2000 server and a mySQL database running on a Windows 2000 server.
We have used MyOLEDB driver(OLEDB) to link the mysql database.
How can I access the data stored in a Linked server?
Any help would be appreciated.
Thanks!!
this is our codeG
exec sp_addlinkedserver @server='OLEDB_test',
@srvproduct=N'',
@provider=N'MySQLProv',
@datasrc=N'203.xx.xx.xx',
@catalog = N'Store'
exec sp_addlinkedsrvlogin 'OLEDB_test','false',null,'root',''
select * from OLEDB_test.Store.root.Books
or
select * from OLEDB_test.Store..Books
error message:
Can't create OLE DB Provider 'MySQLProv' instanceC
OLE DB error trace [Non-interface error: CoCreate of DSO for MySQLProv returned 0x80040154]C
by the wayG
1.We Create an ODBC System DSN that points to our MYSql server
2.We use OLEDB for ODBC to create a linked server to mySQL
3.We have got the query to work with openquery
but we can't updateBdeleteBmodify the data stored in a Linked server
Hi,
I've installed MyODBC-3.51.06 and succsesfully created 2 odbc sources to the MySQL database with the ODBC data source administrator. One is a User DSN, the other a system DSN (Q1: what's the difference?) The test in that applet perfoms positively.
Running a dataimport of the tables using the import data option in enterprise manager does work as well.
Now for the part that gives me trouble. I would like to create a linked server using enterprise manager of SQL server 2000 (SQL 8.00.194) but I'm totaly stuck there. So Q2: how to get this set up?
Hi,
I am using Mysql ODBC 3.51 and/or 5.1 connection . this works fine with DTS But it hangs when I use with SSIS ...
MS Visual Studio is giving message like " MS Visual Studio is Busy"
Which driver should I use for SSIS?
thanks,
J
I haven't used SSRS much but I need to connect a database in MYSQL for SSRS. I right click on Datasource and do add new datasource but the only option I see is SqlNative client and Oracle client. How do I go about connecting to my database in MYSQL
Working on trying to support mutliple backend db's against a custom VB6 app. Right now the db is SqlExpress. It's relatively uncomplicated and I just want to move table structures and data over. Using the MySql Migration tool, I am able to authenticate as SA to a server-based instance of SqlExpress, however, only the MS-supplied databases appear as available databases; my databases don't appear. Can't seem to authenticate at all to any local instance of the database, either. Anyone done any successful migrations to MySql through their migration tool?
Rick
Hi,
A third party development company is creating a third party application for us in PHP and uses a MYSQL database. The app is an extension of our website which is developed in .NET and uses a MSSQL 2005 database. There are some cases where the two databases require connectivity since a few fields need to relate. We are having issues connecting the two databases on the server and after reading some forums have identified it to be a configuration issue.
I was wondering if anyone could be of any help in solving this issue, or lead us in the right direction (i.e. where to begin, forums, etc.). Here is a description and some questions from our developer:
---------------------------
We are trying to get a PHP application (.php pages running on the webserver which is the same physical machine as the MS SQL server) to connect to the database (MS SQL server). In order to facilitate this, php.ini was configured in the following manner:
mssql.secure_connection = ON
extension=php_mssql.dll
We ensured that IIS/Windows was setup properly too:
System32 and php both contain ntwdblib.dll ver 2000.80.194.0
enable pipe name protocol [Default was disable]
enable TCP/IP IP1 [Default was disable]
MS SQL Server is set to Windows AND SQL server authentication (Mixed mode).
When the PHP application attempts to connect to the database by using:
mssql_connect('localhost', '<userid>', '<password>')
produces this error message:
Login failed for user 'MAILIUSR_<computername>'. (severity 14)
Why doe this occur? Why is this IUSR userid being used? the userid we sent in with PHP was a sql userid that we know works (we use it with .NET, and to connect to the database remotely). Also, why is it using the MAIL domain? In anycase, shouldn't this IUSR userid work? it's a valid windows account, and mixed mode authentication is allowed.
-------------------------
Any assistance would be greatly appreciated!
Hello there..... im currently running a mysql database and i want to switch to a mssql database structure... creating the database is not a issue, but inserting values is a problem...
my forum has a lot of data and moving one row at a time is near insanity....
i tried this. ---
Code Snippet
INSERT INTO si_acl_groups ("group_id", "forum_id", "auth_option_id", "auth_role_id", "auth_setting") VALUES
(100, 0, 0, 14, 0),
(96, 0, 15, 0, 1);
but i only get this error. ---
Msg 102, Level 15, State 1, Line 2
Incorrect syntax near ','.
any suggestion...
i was able to dump the mysql database into a .sql file but it just gives the same error when i execute...
please help...
Hie !
Please, how to manage (attach,connect to) MySql database located on host server http://www.avanti.si from my home PC with Microsoft SQL Server Management Studio Express? This "http://www.avanti.si:8080MySqlDatabaseName,3306" fail !
Thenks!
Hi Every bdy,
I have a database which is in mysql. Now we want to port that database to Sql Server 2005. Please tell the steps to do this.
With Regards
Ravinder Reddy.K
I am fairly new to SQL server and am having a problem getting the SQL backup or "dump" to do what I need it to do. My desired end result is to have a database backup every night to a backup device on the same server as SQL is running, and keep one weeks worth of databases in the backup device, overwriting the database backup from 7 days before. This device is then transferred sometime later to another server using the NT AT scheduler. The first time I tried to accomplish this I used Enterprise manager to schedule a full backup to be run each night at midnight. The backup device was set to be initialized and retained for 7 days. This procedure worked once, the first night. There after it failed. In looking at books on line it said that I needed to change the transact -SQL command from INIT to NOINIT as the INIT instruction was the cause of the failure. I changed the statement in the Scheduled Task manager to NOINIT. That seemed to do the trick as I checked the backup device each of the next few days and saw that it was indeed performing the backup and retainng the databases. A week later I checked the backup device again and found that it is still adding database dumps to the file, but it is not overwriting the dumps that are 7 days old. I am told that I need the INIT statement in the dumpdevice command in order for the RETAIN DAYS = command to kick in. However, this did not work before. I can not continue adding to the dump device as it will get too large and take up too much disk space on the server. The only way I can get the device to a reasonable size is to do a backup and initialize the device, which gets rid of all of the older databases. This seems like a catch 22. Is there any way I can make this work. I am running SQL 6.5 on the latest service pack (5a). Any help would be greatly appreciated.
View 4 Replies View RelatedDoes anyone know of any session management with mysql scripts that uses cjtracking?
View 1 Replies View RelatedDoes anyone has a script which gives all databases names and thereallocated, used sizes in SQLserver2k. I want to schedule this to create adaily report.Thanks,Nasir
View 1 Replies View Relatedi've got a database stored on my computer using mysql server 2005, and I've just registered for hosting which uses the Plesk control panel.
In plesk I've setup a database and relevant user. What the easiest way of exporting the whole database on my computer and getting it onto my hosting account?
Hello every one, I have a problem while inserting the date format like mm/dd/yyyy in mySQL. It is showing the date format error.and my requirement is to enter like this format from front-end(asp.net,C#) and i am using mySQL as database. any help would be greatly appriaciated.
View 4 Replies View RelatedI am new to SSIS. I have been struggling with this for the past one week. I have a weird task. I need to import several tables from one database to a different server with a new database name. We need to do this at the end of every year. The main problem here is that the number of tables varies every year. You may not have all the tables as last year or may have more tables. So I need to create a dynamic task that takes care of this every year without changing the package.
I have performed the following tasks **
1. Create a new dynamic database. ( I have used Execute SQL Task to do this) 2. Copy all the table structures ( I have used Execute SQL Task to do this)
3. Import Data. This is the main problem. I was trying to create a dynamic connection string with variables as suggested in several forums but I finally came to know that this cannot be done if the table structures are different as the metadata cannot be refreshed at runtime.
4. The final step to create a process to validate the data (the count from each table for both source and destination. I think this can be done with Sql task.
What is the best method to do this? My DBA does not like “Transfer SQL Objects Task” or “transfer Database Task”. I would like to create this as a dynamic process.