Scheduled Job Running SSIS Packages Not Completing As Expected
Oct 2, 2007
I have a SQL Scheduled Job in SQL 2005 SP2 that executes a few different SSIS packages. When I update the SSIS Packages, SQL Agent runs the job and shows success; however, the underlying packages are not executed. The packages are located on the server but we are using UNC paths in the jobs since much of the time they are started manually from a remote workstation and the jobs seem to look at the initiating workstation's file server rather than that of the SQL Server. Is this a known issue?
Thank you,
Jennifer
View 7 Replies
ADVERTISEMENT
Feb 13, 2008
Below is a migration plan that I've compiled to migrate SQL 2000 DTS packages to SSIS 2005. Once these DTS packages have been migrated i will need to create a job and schedule them in SQL 2005.
I would appreciate and feedback or questions on this migration plan.
Migration DTS 2000 packages to SSIS 2005:
1. Will need to save the current production DTS package as structure storage file. We do not have a UDL file. We set the data connections within each DTS package.
2. Go to Sql 2005 - ManagementLegacyData Transformation Services - right-click and open previous saved structure storage file.
3. Modify the DTS data creditentials to reflect the SQL 2005 connection data. Modify any SQL 2000 MAPI settings to utilize SQL 2005 new database mail. Save the package on SQL 2005.
4. After the modified DTS package has been updated and saved on SQL 2005, save this file as a structure storage file.
5. go to BIDS. Create a new SSIS project. Right-click on SSIS packages and select Migrate DTS 2000 package. This will migrate over the DTS 2000 package with the updated SQL 2005 data creditentails.
6. click on the package properties - protectionlevel and change it to dontsavesensitive.
7. right-click and select package configurations..., select to store data creditentials in xml format.
8. right-click on execute DTS 2000 package task, select Edit... and click on Load DTS2000 package internally. This will embed this task into the new SSIS package. Test the package. Continue if successful.
9. Use SSIS deployment functionality to move the package over to SQL 2005 Integration Services. Right-click on package and select Run Package, if successful, create a job and schedule it to run on SQL 2005 Agent.
10. When creating the Job under SQL Agent, change the Owner: of the job to reflect the owner of the new SSIS package. Schedule the job.
I've just coming up to speed on SSIS 2005. Therefore, this is what i've been able to piece together up to this point and I'm looking for some industry advice/feedback on whether or not this is a good migration plan. I need to provide a migration plan to management by 2/18. Thanks
View 1 Replies
View Related
Apr 28, 2006
Hi
Using SQL Server 2005 with SP1, I have successfully managed to schedule jobs to run SSIS packages. They connect to another SQLServer 2000 box, using SQLOLEDB connection manager, to extract data and import it into SQL 2005. The protection level for the packages is Server storage so that the job is run under the SQL Agent account. This is a specific domain account so that it can access other servers.
However, using the same setup for a scheduled job to to run an SSIS package which connects to another SQL Server 2000 box with connection manager SQL OLEDB, I get the following error message:
The AcquireConnection method call to the connection manager "xxx" failed with error code 0xC0202009.
As the both the successful and failed jobs seem to have been set up in the same way with the same protection levels and are both run under a domain sql agent account, is there anything else I should be checking that I don't know about?
Any help is much appreciated!
View 3 Replies
View Related
Sep 20, 2006
Is there any way to check from SQL code if a specific SSIS stored package is running like a SQL system view or stored procedure? Management studio option works fine but not if you need to determine if a specific package already is running or not?
View 3 Replies
View Related
Sep 5, 2006
When I run an SSIS package from the MSDB in SQL Server Management Studio it never shows up under 'Running Packages'.
I have confirmed that the package is indeed running.
I've also tried to check the packages running on the server programatically by using the GetRunningPackages() method. This too returns nothing when clearly packages are running.
Any ideas?
Malcolm Barclay
Disney Consumer Products UK
View 4 Replies
View Related
Apr 18, 2006
Hi there,
if I have some packages (.dtsx) that are depolyed to Server A and I have SQL Agent installed on Server B - if I run a run a package from SQL Agent, does it run on Server A or Server B?
Thanks in advance.
View 1 Replies
View Related
Jan 11, 2006
Hi,
Has anyone monitored the execution of SSIS packages with MOM? Are there extreme benefits over just utilizing the built in execution and event logs, as well as the Windows Event Viewer?
What is the recommended way to monitor SSIS execution?
Thanks,
- Joel
View 2 Replies
View Related
Jan 31, 2008
Hi
Just a brief question,
is there a way of displaying a success or not success message when running (testing) an SSIS package on SQL 2005 ?
Because i have to go through the steps to see if there was an error or not and for large SSIS packages this is a pain.
With DTS 2000 after it ran you got a message saying successfull or not, is there a way to activate this in SQL 2005 ?
I suppose i could just run the job ... but I prefer the other way as sometimes a job fail is a permissions problem, not a SQL/datapump task problem...
View 1 Replies
View Related
Jan 24, 2007
I have a series of SSIS packages which populate 12 different databases. Which data source & target they use is controlled by values passed down from the SQL Agent Scheduler Job Step using "Set Values"
These values are passed to Variables which are used in the Expressions in the connection manager for the database to change the connection string and initial catalog.
e.g. REPLACE( @[User::ConString] , "Royalty", @[User::RoyDb] )
These jobs run successfully the majority of the time but each day I get a significant number of failures where one or more target or error trapping table cant be found. They are all using the same connection manager and most of the tables in the database get updated correctly but the job fails on trying to access one or two of the tables, with the following message in the On Error event:
-1071636248,0x,Opening a rowset for "[dbo].[RIGDUE_DAY]" failed. Check that the object exists in the database.
This happens both when I schedule the jobs in parallel with other jobs running the same packages & when I run the job by itself using the right click, start at step option. e.g.
I had one fail last night, I ran it by itself this morning, it failed, I ran it again, it succeeded. Nothing concerning the data it was transforming had changed.
I have applied the hotfix to service pack one concerning the paralel use of variables in a package as referred to in the following link.
http://support.microsoft.com/kb/918091#appliesto
Any ideas welcome
View 5 Replies
View Related
Mar 18, 2006
We are using SQL Server 2005 Standard edition. We have the development studio installed on a developer€™s workstation. The SSIS package is accessing network folders using UNC and the tasks in packages are accessing SQL Server with a SQL Server id.
The SSIS package runs fine on the workstation. We deploy the SSIS package as a SSIS store on SQL Server. I receive Error 18456 Severity 14 State 8 error when I run the SSIS package as a SQL Agent job.
When I run the SSIS package from the Integration Services Management Studio, I get The AcquireConnection method call to the connection manager "dboSQLabm" failed with error code 0xC0202009.
I€™m sure this is a permission based problem since it runs fine on my workstation. I tried logon onto the SQL Server with my id (I€™m an admin to the server). I tried running the agent with my windows id. It looks like I€™m getting problem connecting to the SQL Server tables since the logs are properly written to the network drive.
In SQL DTS 2000, all we needed to do was give the SQL agent id permission to the network folder. I tried to search the forums, but none of the solutions seem to work for my situation.
View 4 Replies
View Related
Dec 19, 2007
I seem to be missing something with SQL 2005 SSIS and I am wondering how I would accomplish my taks. With SQL 2000 and DTS we designed our DTS packages so that we could load one file or database from start to finish. We then have controlling programs written in VB that will monitor directories, when a file shows up in a directory it loads the package, changes the necessary properties and executes it. These programs handle all of our error notifications and dealing with the files afterwards, making sure files are complete in the directory before the DTS runs, etc. With .NET and SQL 2005 I have learned that I can change the properties by using variables and expressions, which I think would handle all of our situation but I can not run them remotely. The documentation says that I could setup a scheduled job and then call sp_start_job from my program. That seems like it would require a lot of scheduled jobs and then I still need to get the parameters into the packages. The other option is to use a web service, that would require IIS on my SQL box which everywhere says I don't want. Am I using SSIS for something I am not supposed to be or how do I accomplish this in 2005?
I have noticed that you can not even run packages through the SQL Server Management Studio. We have a number of packages that are built that are run on demand when needed. In SQL 2000 I could just click and execute the package. In 2005 is my only option to setup some sort of fake job in the job scheduler?
View 6 Replies
View Related
Oct 16, 2006
I need some help from you on a problem with SQL Server Agent that I believe many of you have experienced. When searching on the web I find some loose answers, but it would not solve my problems. So here is my story.
1. I have created two SSIS packages, package 1 and package 2. Both packages have a Execute SQL Task making a select sql statement to a table, say Customer in AdventureWorks DB. Package1 also makes a Execute Pacakge Task to Package 2. Both packages have protectionlevel property set to EncryptSensitiveWithUserKey
2. Then I created two package configuration files per package, one indirect xml configuration and one xml configuration file. The former I created an environment variable called pack1, which was specifying the path and file name of second config file. Likewise, I did for package2. Maybe I could have reused thie first configuration file, but I am not sure since package1 calls package2.
3. Now I build and deploy my packages. Then I run my manifest file, going through the deployment wizard setting the necceccary properties like server name, user, password, I have also create the same environment variables on the deployment machine. I ensure that the package1 and package2 can be run under integration services (file system). And both package works. So far so good
4. Now I want to create a SQL server agent job that runs package1 and package2. Here I found an article that decribed How to Schedule and Run a SSIS package ( DTS ) Job in SQL Server 2005 http://www.codeproject.com/useritems/Schedule__Run__SSIS__DTS.asp
5. I created a job executor account and then Create SQL proxy account and associate proxy account with job executor account as described. I created a new ssis job, specifying type ssis integration services, run as proxy, setting package source to SSIS package store, naming the server and package name (package2).
6. Now, I try running job1 which runs package2. ANd it works. I was aware if I needed to give file permission on users (read and execute) on my dtsx/dtsconfig/log files. So far so good
7. Now, I try to run job test which runs package1 (which also runs package2). But now the job fails :-(. The job runs for some seconds, but fails. I have to say that I have some script tasks with message boxes inside!!! hope this doesn't matter. I have created all neccessary accounts, proxies, credentials and so on. here is the view history
Date 17.10.2006 00:50:53
Log Job History (test)
Step ID 1
Server ABEO-GEIR
Job Name test
Step Name test
Duration 00:00:07
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
Executed as user: abeo-geir
as_jobuser. The package execution failed. The step failed.
Continue: This error is well known for you. It has been mentioned in many postings. Well, how do I go from here. Setting logging on the job results in only this information
PackageStart,ABEO-GEIR,ABEO-GEIR
as_jobuser,Package1,{3F5BD166-D24B-4838-B3F1-018B6C2C7523},{8E1B8E45-7F1D-4C24-852C-2694F993E6D2},17.10.2006 00:59:40,17.10.2006 00:59:40,0,0x,Beginning of package execution.
PackageEnd,ABEO-GEIR,ABEO-GEIR
as_jobuser,Package1,{3F5BD166-D24B-4838-B3F1-018B6C2C7523},{8E1B8E45-7F1D-4C24-852C-2694F993E6D2},17.10.2006 00:59:41,17.10.2006 00:59:41,1,0x,End of package execution.
Well, I read some place that I could run the job as type operating system (cmdexec). Here i could not choose Run as, but had to select SQL SErver agent account. NOw I got this message
Date 17.10.2006 01:05:21
Log Job History (test)
Step ID 0
Server ABEO-GEIR
Job Name test
Step Name (Job outcome)
Duration 00:00:00
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
The job failed. The Job was invoked by User sa. The last step to run was step 1 (test).
As you see, I can't come any further. I NEED HELP FROM YOU. I AM STUCK. I know many of you have solved this and I hope you can guide me through thise. I don't know how many hours or days I have used on this.
Regards
Geir F
View 2 Replies
View Related
Dec 23, 2005
I have created ssis package. It has been successfully running at UI level.
But when i am trying to execute it from the command prompt by using dtexec utility it is showing the following error messages.
Error: 2005-12-23 17:01:57.67
Code: 0xC00470FE
Source: Data Flow Task DTS.Pipeline
Description: The product level is insufficient for component "Flat File Source" (1).
End Error
Error: 2005-12-23 17:01:57.67
Code: 0xC00470FE
Source: Data Flow Task DTS.Pipeline
Description: The product level is insufficient for component "Script Component" (9).
End Error
i have entered the command as follows.
dtexec /f "c:somefolderpackage1.dtsx"
Any points regarding this issue would be helpful.
View 7 Replies
View Related
Jan 29, 2007
Hello,
I currently use DTSRun to run packages on my scheduler box. I would like to use the same set up to run SSIS packages.
Is there any way to duplicate this without installing SSIS on my scheduler box? Can I specify the server on which it should run?
Just don't want topurchase another license, if possible.
- Dave-
View 3 Replies
View Related
Sep 25, 2007
It is clear to me that in order to be able to use certain SSIS components (for example the Excel jet provider) I must launch my packages using the 32bit DTEXEC located at Program Files (x86)Microsoft SQL Server90DTSBinn. However, when I do this it seems that there are other components of the package that no longer work as expected.
To test this I have created a simple package with two tasks (Run64BitRuntime is set to False):
1. Data flow task importing data from Excel
2. Execute SQL Task which does a simple select (select 1) from a Native OLE DB SQL data source (same SQL Server on which packages are stored). This task contains no input or output parameter.
When I try to execute the package using the 64bit DTEXEC, task 1 fails with the following error (as expected):
Code: 0xC0202009
Source: connection1 Connection manager "SourceConnectionExcel"
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040154.
An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040154 Description: "Class not registered".
When I execute the package with the 32bit DTEXEC, task 2 fails with the following error
Code: 0xC002F210
Source: Execute SQL Task Execute SQL Task
Description: Executing the query "" failed with the following error: "Attempted to read or write protected memory. This is often an indication that other memory is corrupt.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Now here is the confusing part: When I change task 2 to use the .Net provider instead of the OLE DB the package works fine. According to the MS documentation, both of these providers are supported on 32 and 64 bit so am I missing something? One more thing to note: before I was able to use the 32 bit DTEXEC I had to re-register it as described in this KB article: http://support.microsoft.com/kb/919224
View 5 Replies
View Related
Apr 2, 2008
Hi,
I'm running several SSIS-packages in stored procedure using dtexec. Actually, there is a software that is running the procedure, but that's not important here.
The problem: if some of the packages failes, the whole procedure does not fail and I don't know if all the packages are successfully completed.
Here is a sample list of ssis-packages from procedure:
exec xp_cmdshell 'dtexec /f "E:SSISSourcedataSourcedataaaa.dtsx"'
exec xp_cmdshell 'dtexec /f "E:SSISSourcedataSourcedatabb.dtsx" '
exec xp_cmdshell 'dtexec /f "E:SSISSourcedataSourcedataccc.dtsx"'
exec xp_cmdshell 'dtexec /f "E:SSISSourcedataSourcedataddd.dtsx"'
exec xp_cmdshell 'dtexec /f "E:SSISSourcedataSourcedataeee.dtsx"'
So, if eg bbb.dtsx would fail, is it possible to get the whole procedure failing?
View 5 Replies
View Related
Aug 26, 2013
We are in the process of upgrading to a new SQL 2012 server but we have many packages that load data from dbf files created with FoxPro into one of our databases. We have not converted the packages and run them with DTS but we get the following error:
Error: 2013-08-26 11:05:27.36
Code: 0xC0209303
Source: BenchmarkLoad Connection manager "OLEDB NPIONE.Investment.middleTierSQL"
Description: The requested OLE DB provider SQLNCLI.1 is not registered. If the 64-bit driver is not installed, run the package in 32-bit mode. Error code: 0x00000000.
[Code] .....
I searched for OLEDB and ODBC drivers for SQL 2012 64 bit but cannot find any that is newer than the 2005 that we have. What can I do short of changing the source files to overcome this issue?
View 8 Replies
View Related
Sep 5, 2007
I have a ssis package that has multiple large lookups without memory restriction. When running the package manually from SSMS on the same server it runs on when running automatically under the job agent, the package errors out when the server memory gets depleted by the loading of the large lookup reference data. One of the messages I get is
"An out-of-memory condition prevented the creation of the buffer object. "
Anyway, the package runs successfully when it runs automatically under the job agent.
I was curious as to why the above happens. Is that a bug or is the run time behavior different under these 2 environments by design.
js40
View 2 Replies
View Related
Jan 11, 2008
Hi,
I have stumbled on a problem with running a large number of SSIS packages in parallel, using the €œdtexec€? command from inside an SQL Server job.
I€™ve described the environment, the goal and the problem below. Sorry if it€™s a bit too long, but I tried to be as clear as possible.
The environment:
Windows Server 2003 Enterprise x64 Edition, SQL Server 2005 32bit Enterprise Edition SP2.
The goal:
We have a large number of text files that we€™re loading into a staging area of a data warehouse (based on SQL Server 2k5, as said above).
We have one €œmain€? SSIS package that takes a list of files to load from an XML file, loops through that list and for each file in the list starts an SSIS package by using €œdtexec€? command. The command is started asynchronously by using system.diagnostics.process.start() method. This means that a large number of SSIS packages are started in parallel. These packages perform the actual loading (with BULK insert).
I have successfully run the loading process from the command prompt (using the dtexec command to start the main package) a number of times.
In order to move the loading to a production environment and schedule it, we have set up an SQL Server Agent job. We€™ve created a proxy user with the necessary rights (the same user that runs the job from command prompt), created an the SQL Agent job (there is one step of type €œcmdexec€? that runs the €œmain€? SSIS package with the €œdtexec€? command).
If the input XML file for the main package contains a small number of files (for example 10), the SQL Server Agent job works fine €“ the SSIS packages are started in parallel and they finish work successfully.
The problem:
When the number of the concurrently started SSIS packages gets too big, the packages start to fail. When a large number of SSIS package executions are already taking place, the new dtexec commands fail after 0 seconds of work with an empty error message.
Please bear in mind that the same loading still works perfectly from command prompt on the same server with the same user. It only fails when run from the SQL Agent Job.
I€™ve tried to understand the limit, when do the packages start to fail, and I believe that the threshold is 80 parallel executions (I understand that it might not be desirable to start so many SSIS packages at once, but I€™d like to do it despite this).
Additional information:
The dtexec utility provides an error message where the package variables are shown and the fact that the package ran 0 seconds, but the €œMessage€? is empty (€œMessage: €œ).
Turning the logging on in all the packages does not provide an error message either, just a lot of run-time information.
The try-catch block around the process.start() script in the main package€™s script task also does not reveal any errors.
I€™ve increased the €œmax worker threads€? number for the cmdexec subsystem in the msdb.dbo.syssubsystems table to a safely high number and restarted the SQL Server, but this had no effect either.
The request:
Can anyone give ideas what could be the cause of the problem?
If you have any ideas about how to further debug the problem, they are also very welcome.
Thanks in advance!
Eero Ringmäe
View 2 Replies
View Related
Dec 18, 2007
Has anyone had experience of using Parent/Child packages while enlisting them in Transactions.
I tested this on a small sample and thought that I had got it to work, but in my real-world package it does not.
The parent package essentially calls three child packages.
In each child package there are multiple DFT's that import and transform data into SQL Server.
All data must be imported or not at all.
Therefore I created a FELC container into which three Exec child package tasks were placed.
The FELC is set to Trans Option 'Required' and the Exec child package tasks to supported.
Unfortunately upon failure of one of the DFT's in the child the data was not rolled back.
So initially we had in terms of container hierarchy for the Trans Option property:
Parent package Supported
FELC for calling child packages Required
Task execute child package Supported
Child package Suppored
Tasks Suppored
Looking at this more closely we thought that we would need
Parent package Supported
FELC for calling child packages Required
Task execute child package Required
Child package Required
Tasks Suppored
for it to work.
However, the latter now gives us failures with error messages on the tasks on the child packages.
[Execute SQL Task] Error: Failed to acquire connection "Conn ECARS1CEDImport". Connection may not be configured correctly or you may not have the right permissions on this connection.
Even more strange the first couple of tasks in the child pkg complete successfully even though they use the same connection listed in the error.
These tasks also have Event handlers.
View 7 Replies
View Related
Aug 16, 2000
Why is it that I can run my DTS package locally howeverv when I try to run it as a Job it always fails? I do realize that the sqladmin account is used to run the job and it has all the permissions needed.
Any suggestions?
Also if I kick the job off from my local system it states it cannot find the batch file that I am trying to run? Im running it on the server however it treats it like im running it locally?
Very frustrated..
Thanks
David
View 5 Replies
View Related
Jun 25, 2002
I have 2 DTS packages that import data from an Access database that have recently started failing. They run fine manually in DTS, but not manually as a job. They get an "unspecified error." These were running fine, until we installed Outlook and started to add Outlook mail to SQL.
Originally, Administrator was the owner and that is how the jobs were run. We changed to SQLAdmin for the SQLAgent to start under, and I changed the owner of the jobs to SQLAdmin. This works for all jobs but these 2. I thought maybe SQLAdmin could not get to the Access database, but it can. I spell out the path for the database, I don't use any mappings. I recreated the jobs logged in as SQLAdmin, and they still do not work as jobs.
Any ideas are much appreciated!! Thanks in advance!!
Karen
View 5 Replies
View Related
Mar 30, 2001
Is there any difference starting a DTS package manually or running as a scheduled task.
There is a DTS package that I start manually from my PC and runs for 40 minutes and during this time I cannot access Enterprise Manager.
View 2 Replies
View Related
Mar 26, 2003
Hi all - I'm having problems getting a package to run successfully to completion when I schedule it in SQL Server or as a batch file on the Windows scheduler. If I run the package interactively or run the batch file interactively that contains the DTSRUN command it runs to completion. Both packages start with a call to a batch file that FTPs files from a remote server and then they continue on by executing additional DTS packages within the running package. The owner of all the packages involved and is the same user that I am logged in as when running the packages interactively and is the same user that that SQL Agent and the Windows scheduler job runs under. The FTP step of each package does complete successfully but then I cannot trace where the package then hangs. The package never fails but rather it just continues in a Executing/Running state. This is getting extremely frustrating. Any insight in to this problem would be greatly appreciate.
View 4 Replies
View Related
Jun 20, 2007
I have a section of about 6 DTS packages that started failing recently. They all write to a network share using a UNC path. The failure coincides with a change to the account SQL Server and SQL Agent run under. I know security context is very important and I have verified the new service account they run under is a Domain account that can execute the DTS packages and has full permissions to the network share.
But when the Agent Job tries to run it fails everytime. Two of us have been looking at this and can't find the issue.
NOTE: I also made the service accout a Server Administrator (fixed server role) to make sure it wasn't a SQL permissions issue.
Anybody have any suggestions about where to look?
View 3 Replies
View Related
Jun 20, 2001
I have SQLServer 7, and have used Enterprise Manager to schedule local packages. The package that I'm trying to do is run a SQL script on a nightly basis. The problem that I'm having is that I need to be able to install the scheduled script customer box using an installer. I have access to execute command line programs in the installer. Do anyone know if you can schedule local packages (using SQL Scripts) from the command line? Or if a 3rd party application can do this. Any help or direction would be greatly appreciated. I've tried to use sp_add_job and sp_add_jobschedule, but haven't been able to get them to work.
Thanks
Brian
View 1 Replies
View Related
Dec 29, 1999
Please help,
I have a DTS package that consist of approximately 50 steps which pulls data from an as400 and populates a SQL 7.0 database. The package works perfect flawlessly when executed manually but won't run when scheduled.
The DTS package starts but hangs when it tries to connect to the as400, this is where the problem lies. The preceeding steps work fine but they execute against the SQL 7.0 database. I have client access installed on the server and configured. I checked and made sure the SQL server agent service was started and running also,I just can't figure why it works fine manually,but not when scheduled.
Any help would be welcome...
View 2 Replies
View Related
Apr 22, 2004
I created a DTS Local Package that should run on a specified time (ex. 9:00 AM) using EnterPrise Manager on my PC.
It is basically copying a file from our AS400 to the SQL server. It works fine if you execute it but the scheduler does not run at the specified time.
Am I missing anything here?
TIF
View 9 Replies
View Related
Feb 15, 2008
Hi, I need to write a script to run an automation in MS SQL 2005. It will run every 10 hours. What the script will do is just import a .cvs file into a database table. Can someone let me know how can I acheive this? Thanks in advanced.
View 2 Replies
View Related
Nov 2, 1998
Hey how are you.
I'm going crazy with EM's Sheduled Tasks.
I've setup couple of backups and weekly maintenance plans from EM.
After couple of days I viewed sheduled tasks from EM toolbar
and found that all the tasks have not executed as I have scheduled.
the task history does not show any history at all.
Clicking refresh does not do any good either.
However if i right click on the database and choose restore i see all the backups
that i have scheduled.
Is this a bug?
Can someone tell me what's wrong???
THANKS IN ADVANCE
View 1 Replies
View Related
Dec 20, 2007
We have DTS Packages that are scheduled to run nightly and show up in EM under JOBS under SQL Server Agent. A password got changed and some of the nightly jobs blew up.
Went into the Packages and entered the new password and successfully executed the packages BUT when I go back to jobs under the SQL Server Agent, the jobs STILL will not run - they fail with a login failure - as if i never fixed the DTS package. HELP
View 3 Replies
View Related
Oct 5, 2007
Hi!
I've written an scheduled job for importing an excel file into a sql table.When I try to run the job from Sql server agent , I get the status 'Not running',and in the last run status,it's written 'failed'.I've tested the command before in the query analyzer,and it works.Can someone tell me why isn't this working as a scheduled job?
Thanks in advance!
View 4 Replies
View Related
May 4, 2006
I have created a DTS package to read data from a SQL Server table and copy it to an Excel file on one sheet. I have tested the DTS package manually and it runs. I scheduled the package but it keeps failing giving the following error message. The path to the Excel file is valid and the SQL server is connected to the server where the Excel file resides.
... DTSRun: Executing... DTSRun OnStart: Copy Data from vw_Symbols to vw_Symbols$ Step DTSRun OnError: Copy Data from vw_Symbols to vw_Symbols$ Step, Error = -2147467259 (80004005) Error string: 'S:Mission Critical EnterprisesCurrent ProjectsJPMC Aperture Rollout 05-100-1-0001Symbol RequestsJPMC - Symbols Added.xls' is not a valid path. Make sure that the path name is spelled correctly and that you are connected to the server on which the file resides. Error source: Microsoft JET Database Engine Help file: Help context: 5003044 Error Detail Records: Error: -2147467259 (80004005); Provider Error: -534774783 (E01FFC01) Error string: 'S:Mission Critical EnterprisesCurrent ProjectsJPMC Aperture Rollout 05-100-1-0001Symbol RequestsJPMC - Symbols Added.xls' is not a valid path. Make sure that the path name is spelled correctly and that you are connected to the server on which the file resides. Error sour... Process Exit Code 1. The step failed.
View 6 Replies
View Related
