i had scheduled to run a package it failed but a part of the package still shows up on the integration system running packages. i tried to stop it or delete it nothing works. when i try toi run the package even in visual studio that part of the package fails.
how do i remove the running package???
Thanks
jas
I have a SQL Agent job that runs at 4:15 in the morning. The job has 5 steps, each step only runs if the preceding step succeeds. The second step, which calls an SSIS package that does the main processing, appears to finish as it goes on to the next step; however, when looking in 'View History' there are 2 entries for this step - the first one shows it as still running (Circled Green Arrow) but with a start and end time. The second entry says the job succeeded.
I have been seeing conflicts, such as deadlocks, with later jobs. I suspect this job is causing the conflicts - maybe the package is still running in the background instead of having actually completed?
what conditions a job step my be showing in the job history as both running AND completed successfully?
I have created a DTS package to read data from a SQL Server table and copy it to an Excel file on one sheet. I have tested the DTS package manually and it runs. I scheduled the package but it keeps failing giving the following error message. The path to the Excel file is valid and the SQL server is connected to the server where the Excel file resides.
... DTSRun: Executing... DTSRun OnStart: Copy Data from vw_Symbols to vw_Symbols$ Step DTSRun OnError: Copy Data from vw_Symbols to vw_Symbols$ Step, Error = -2147467259 (80004005) Error string: 'S:Mission Critical EnterprisesCurrent ProjectsJPMC Aperture Rollout 05-100-1-0001Symbol RequestsJPMC - Symbols Added.xls' is not a valid path. Make sure that the path name is spelled correctly and that you are connected to the server on which the file resides. Error source: Microsoft JET Database Engine Help file: Help context: 5003044 Error Detail Records: Error: -2147467259 (80004005); Provider Error: -534774783 (E01FFC01) Error string: 'S:Mission Critical EnterprisesCurrent ProjectsJPMC Aperture Rollout 05-100-1-0001Symbol RequestsJPMC - Symbols Added.xls' is not a valid path. Make sure that the path name is spelled correctly and that you are connected to the server on which the file resides. Error sour... Process Exit Code 1. The step failed.
I created a DTS Package. It worked fine if I execute the DTS from DTS designer. It failed after I right clicked to Schedule Package, and than right clicked on the job to Start Job from Management - SQL Server Agnet - Jobs. When I clicked View Job History, the error was "The job failed. The last step to run was step 1 (DTSPackageName).
Why did it fail from scheduled DTS? Thanks.
DanYeung
Hi
Using SQL Server 2005 with SP1, I have successfully managed to schedule jobs to run SSIS packages. They connect to another SQLServer 2000 box, using SQLOLEDB connection manager, to extract data and import it into SQL 2005. The protection level for the packages is Server storage so that the job is run under the SQL Agent account. This is a specific domain account so that it can access other servers.
However, using the same setup for a scheduled job to to run an SSIS package which connects to another SQL Server 2000 box with connection manager SQL OLEDB, I get the following error message:
The AcquireConnection method call to the connection manager "xxx" failed with error code 0xC0202009.
As the both the successful and failed jobs seem to have been set up in the same way with the same protection levels and are both run under a domain sql agent account, is there anything else I should be checking that I don't know about?
Any help is much appreciated!
I am receiving an error on my master package that executes a number of other packages. The individual packages work fine when executed by themselves. However, I am getting the following error when I attempt to execute it from another package:
Error: Failed to acquire connection "conneciton". Connection may not be configured correctly or you may not have the right permissions on this connection.
Thanks in advance for your help.
I have an asp.net web application and a web service (both of them are created in VS 2005 - asp.net 2.0). They are located on the same web server. In both web.config files, I have set <authentication mode="Windows"/> and <identity impersonate="true"/>. Also, configured the IIS settings to use Integrated Windows Authentication and unchecked the Anonymous access (for both). The web service is called from the web app, so I have to pass credentials for authentication to the web service. The web service loads and executes a SSIS package. The package and all the other sql objects are located in the sql server 2005 (windows server 2003 - the same server as the web server).
When run the web service from develop environment (vs. 2005), I get whatever I expected. When call it from web application, however, the package failed (no error message).
In the SSIS package, there are three connection managers €“
· A: Microsoft OLE DB Provider for Analysis Services 9.0 Ã connectionType=OleDbConnection
· B: .Net Providers SqlClient Data Provider à connection type=SqlConnection
· C: Native OLE DB Microsoft OLE DB Provider for SQL Server à connectionType=OLEDB
After ran the web application and check the sql database, I can tell that the package was reached and when through the first two steps (clear some records in table_1 and extract some records from table_2 ) which relate to the connection manager B €“ ADO.Net connection. The remaining steps failed which are related to the connection managers A & C.
From SSIS package log file, found that the user credentials (domain and username) were correctly passed from web service to sql server 2005 at the first two events, but the credentials (or operator) changed from domainABCuser123 to NT AUTHORITYNETWORK SERVICE after packageStart. Then, it complains €¦ either the user, domainABCserverName$, does not have access to the database, or the database does not exist.
I think the credentials are passed ok but some setting related to the Analysis services are not correct - complaining start from there. Any clues?
Please help and thank you all!
Hi guys..
I had created a Integration services project within my local system.All my packages are running fine.I added it to source control.Now i added this project from source control to another machine.It is failing to run...The path it is trying to execute is the location of the where i actually created my project.
How can i make it work.let me know
I created a DTS Local Package that should run on a specified time (ex. 9:00 AM) using EnterPrise Manager on my PC.
It is basically copying a file from our AS400 to the SQL server. It works fine if you execute it but the scheduler does not run at the specified time.
Am I missing anything here?
TIF
Hi, I need to write a script to run an automation in MS SQL 2005. It will run every 10 hours. What the script will do is just import a .cvs file into a database table. Can someone let me know how can I acheive this? Thanks in advanced.
View 2 Replies View RelatedHey how are you.
I'm going crazy with EM's Sheduled Tasks.
I've setup couple of backups and weekly maintenance plans from EM.
After couple of days I viewed sheduled tasks from EM toolbar
and found that all the tasks have not executed as I have scheduled.
the task history does not show any history at all.
Clicking refresh does not do any good either.
However if i right click on the database and choose restore i see all the backups
that i have scheduled.
Is this a bug?
Can someone tell me what's wrong???
THANKS IN ADVANCE
We have DTS Packages that are scheduled to run nightly and show up in EM under JOBS under SQL Server Agent. A password got changed and some of the nightly jobs blew up.
Went into the Packages and entered the new password and successfully executed the packages BUT when I go back to jobs under the SQL Server Agent, the jobs STILL will not run - they fail with a login failure - as if i never fixed the DTS package. HELP
Hi!
I've written an scheduled job for importing an excel file into a sql table.When I try to run the job from Sql server agent , I get the status 'Not running',and in the last run status,it's written 'failed'.I've tested the command before in the query analyzer,and it works.Can someone tell me why isn't this working as a scheduled job?
Thanks in advance!
Hi there!,
Problem: I schedule a job that calls a stored procedure which loads around 1.5 million records. The Job takes 19 hrs to complete. However, if i run that stored procedure manually in Query Analyser it takes only 45 minutes..
Did anyone faced this problem? Is this known problem..Any suggestions/recommendations?
thank you.
regards,
Nana
I've tried finding an answer to this on this website but I don't see any. I'm running SQL Enterprise Manager v8.0 and have a job in the SQL server agent folder that won't run as scheduled nor will it run manually if I Right-Click and choose Start Job.
It's designed to run a DTS. I can run the DTS manually without errors but the job won't run it for me. I will try to provide as many details in this post as I can in hopes that someone who is more experienced at this can help me.
DTS DETAILS
The DTS is designed to transfer data from a table on one server and transfer it through a firewall to another server into a table on that server. Then delete the entries from the originating table. This works very well if I run it manually. The purpose of deleting entries from the web server is for security. Once the data in on the other side of the firewall it's safe.
The job however will not run either manually or from it's schedule. I've tried creating a new job and setting up a very simple schedule that runs daily every 2 minutes for example. I've played around with different times but no luck. So I will try and provide you with job details below:
JOB DETAILS
Name: TransferData
Enabled, Target = Local Server
Category: Uncategorized Local
Description: Execute package: TransferData
STEPS
ID: 1
Step Name: TransferData
Type: Operating System Command
On Success: Quit with Success
On Failure: Quit with Failure
PROPERTIES OF STEP
Step Name: TransferData
Type: Operating System Command (CmdExec)
Command: ( I have no idea what this translates to as I did not write it) DTSRun/~Z0xF6EE76ED6259A60AC370F465DE7F3095F4B37F7176C05B8E72E396DEBE60135E53ACFEDB00E1F216DD8EC8206782439BA435771E3C1E8A7A5D0DAE3F3AAA9F48BF08A9A9FA23C010A85573546F6B6B900323F76DC8A27EACAFD63904464DD5A9B28137
Nothing special in the advanced tab
SCHEDULES TAB
ID: 20
Name: TransferData
Enabled: No
Description: Occurs every 1 day(s), every 2 minute(s) between 12:00:00 AM and 11:59:59 PM
and is setup as Recurring
Nothing in Notifications Tab
I only have two SQL books to reference. This is a production fire to put out and I really need the help here as I am not a certified SQL guru.
I hope I have provided enough information here for someone to help. I'm happy to provide an email address for easier contact should you request it.
Thanks in advance for any assistance with this.
Select into query that ran for several hours failed and table got truncated ... what might be the reasons? In the db I have two datafiles... with unrestricted growth and the space allocalted are
13834 MB and 12576 MB. What can be the problem?
one of the sql server logs were:
Autogrow of file 'filename2' in database 'dbname' cancelled or timed out after 4094 ms. Use ALTER DATABASE to set a smaller FILEGROWTH or to set a new size.
Hi!
I just wonder if it is possible to run a scheduled task from a SQL Server 6.5 Client. Whenever I would try to run a scheduled task from a SQL Server Client a would get the error message that says "The SQLExecutive service is not currently running on server 'POFDS1099'. This prevents task 'ACORS2 FS90 People Pull' from being run", but when I would try to go the server itself, the service is runnning. Can anybody please tell me what could be the possible cause of this or perhaps 6.5 doesn't really support running scheduled task using SQL Server client. Thanks.
By the way, I also have SQL 2000 Client running on my local.
Thanks again,
Lhot
Hi all,
I am using SQL Server 7.0 SP3. There is a scheduled job running daily. It was running fine but one day it didnt run and started running fine from next day. There was no error logs in NT log & SQL Server Error log. The reason why the scheduled job was not triggered is unknown. Anybody come across like this before? Can anyone tell me the reason why job didnt run.
Note: SQL Server Agent was running on that day too. So what could be the reason the job failed ?
regards,
Nana
We run 4 nightly scheduled jobs on our sql 2005. All use the same domain account and were running fine until a few days. Then the SSIS job started failing when run via the scheduler. (It does run when I execute it manually). The sql 2005 History simply says the package failed and was "Executed as <Domain-User>", the same user that successfully ran the other 3 scheduled jobs.
SQLAgent.out shows SQLServer Error:: 2812 Could not find stored procedure: msdb.dbo.xp_sqlagent_notify.
Relevant?
Any ideas wherewhat to look for next?
TIA,
Barkingdog
I have a SQL Scheduled Job in SQL 2005 SP2 that executes a few different SSIS packages. When I update the SSIS Packages, SQL Agent runs the job and shows success; however, the underlying packages are not executed. The packages are located on the server but we are using UNC paths in the jobs since much of the time they are started manually from a remote workstation and the jobs seem to look at the initiating workstation's file server rather than that of the SQL Server. Is this a known issue?
Thank you,
Jennifer
Hi Greeting,
Sql sever7
OS winNT
We have scheduled transaction log backup for user database to run every one hour. Now the transaction has failed. it gives out put
[12] Database oas: Delete Old Backup Files...
Unable to delete file E:mssql7 logsoasoas_tlog_200608111300.TRN. 0 file(s) deleted.
When we try to delete the file manully, we get alert message "can not delelte the file as it is in use."
Please suggest how to solve this.
Awating for reply
Thanks in Advance
Adil
Hi allI am looking for the best method to automate a website's database management. Lets say I have a user registration database and the users register. This sends an automated email to the user with a link to activate the users registration. If the user does not register within 24 hours, his registration must be automatically deleted from the database using a stored procedure.I know how to do this using the global.aspx file, however there must be an alternative way of doing this, especially if the database is an SQL database. I do not know how much MSSQL server access is given to a developer by an as ISP who hosts the website.Can anyone tell me what would be the best method to use.ThxWarren
View 1 Replies View RelatedHi All,
I have created a DTS package on a developement server that connects to our Exchange server and downloads customer service e-mail and inserts them into a table. This is done using a VB script.
When I right click on the job and execute it, it runs fine and we can see the mails after they show up in the table.
However, when I schedule the job to run at 15 minute intervals it fails with a vb runtime error. When I copy the job to my personal machine and schedule it, it runs just fine and again we see the mails in the table.
The server has the latest version of the scrrun.dll as well as IE 5.0.
I have messed around with this for 3 days now and have gotten MSFT involved as well.
Anyone seen this before? Any ideas or help will be greatly appreciated.
Brad Keck
Hello Everyone,
When I run DTS from SQL Enterprise Manager its running fine.But When I Scheduled it then it takes lot more time.
What is the differenace between when we run it from Enterprise manager and run it from Schedule?
Why Scheduled DTS running very slow? Is there any solution of it?
If anyone know Please replt as soon as possible.
Thanks,
Bhavik Shah
After setting up the linked server connection at the standby server, Itried to xcopy a file through the sql server 2000 schedule task to thestandby server's shared directory. But it keeps giving me the errormessage with'Invalid Drive Specification'.My whole process includes1) set up linked server connection on the standby server2) set up job to xcopy file as operating system commend in sql serverfrom the production box(xcopy c:directoryfile.bak\standby_servere$directory /c)3) test, but not successful - I am already running the whole scheduletask as a Windows user with Admin authority.)What did I do wrong or did I miss something?Thanks in advance
View 6 Replies View RelatedDear all,
I've built SSIS package and made a job to execute it automatically but it always returns an error. The job returns OK but when we looked at the Log File viewer, it conatins this error log :
Key not valid for use in specified state
Failed to decrypt protected XML node "DTS Password" with error
What's wrong with the package ?
Thanks in advance.
Best regards,
Hery
I have created a package that takes a Visual FoxPro .dbf and imports into SQL7. If I run the job, it works fine. If I schedule the job it fails stating that I can't find the .dbf, the same one that it just found when run manually. What gives?
View 1 Replies View RelatedMy database resides on my ISP SQL server, in Colorado. My new data can be found as a TXT file on the C: drive of the shipping PC in my Florida office.
I created a DTS package to import the data from the TXT file to a table in my database. The package works fine, until I schedule it to run.
The package uses the UNC address to find the TXT file. As a result, I can go to any PC in my office and execute the package.
But, when I schedule it to run unattended, it fails.
Can anyone give me any advice?
Hi,
I have a DTS package which when I execute it manually, it executes perfectly. I need to schedule it and therefore had to use the scheduler which would creata a job for the package. The problem is that job. It does not execute; it fails every time. The error message is: Sql server does not exist or access is denied.
I have tried to trouble-shoot by setting up an alias for the server in the client network utility for sql server. I also create a new dsn with the new alias. It still failed with the same error message. I edited the properties of the dts package to connect to the server's ip instead of it's alias or logical name. Still fails.
Any ideas anyone?
Maria
The package has 15 DTS 2000 tasks that execute sequentially, depending on 15 successes. The 15th task then invokes 11 more DTS 2000 tasks simultaneously which each invoke a mail task on their success. The package is saved as part of a valid project. The entire package is successful executing within Visual Studio -- 37 green boxes. I move the package as file system .dtsx to my database as a stored package within MSDB and then schedule it as a job via SQL Agent invoking the MSDB stored package.
The package has a log file referenced in the scheduled job for errors and diagnostics while each of the 26 Transforms Data Tasks within the DTS 2000 packages writes to a fully qualified exception file on my server. The log and exception files have valid data when the package runs in Visual Studio but the exception files are untouched when the job fails and the log only references one of the 11 dependent steps with a job failed message. SQL tables are updated and files created from the Visual Studio execution but nothing is created when the job fails.
I am assuming there is a disconnect with the way I am moving the package to the scheduled job but I don't know what the problem is. Can anyone help?
Den
Hi,A DTS package which is running fine when execute ,always fails asscheduled job.I read from the previous posts about MS KB article 269074, securityand MDAC, but I don't understand and don't know how to solve it.Please help.My scenerio:SERVER : MS Windows 2000 server is in a PRODUCT DOMAINMS SQL SERVER 7.0 SP2- Agent started up by SYSTEM ACCOUNT andConnection as NT AuthenticationWORKSTATION (Enterprise Manager as Tool to connect MS SQL SERVER andwrite and schedule DTS Package): MS Windows XP connect as NT Authenticationbut in WORKGROUP DOMAINBest RegardsNipon Wongtrakul
View 1 Replies View RelatedI have a large number of SSIS packages, which I have developed over the last few months.
Having written and tested them locally, running in VS05 etc - I have moved them to a server, stored in the MSDB database.
I am having real troubles with packages that move tables from one database to another.
I am working on a migration project, so I have several packages that move tables from the source database, into my staging database.
One package which will not run at all, basically just moves 15 tables from database A on my server to database B.
The package is essentially a few SQL tasks to create tables, then a data flow.
The data flow contains the table movements as an OLE DB source to an OLE DB destination. No intermediate processing.
In an attempt to get some meaningful logs of the reasons for failre I ran the package from the commandline with the output piped to a text file. That text file contained the following error:
Error: 2006-11-20 11:48:47.78
Code: 0xC0202009
Source: Data Flow Task Source - tblParking [1641]
Description: An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Protocol error in TDS stream".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Communication link failure".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Shared Memory Provider: No process is on the other end of the pipe.
".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Communication link failure".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Shared Memory Provider: No process is on the other end of the pipe.
".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Communication link failure".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Shared Memory Provider: No process is on the other end of the pipe.
".
End Error
Error: 2006-11-20 11:48:47.78
Code: 0xC0047038
Source: Data Flow Task DTS.Pipeline
Description: The PrimeOutput method on component "Source - tblParking" (1641) returned error code 0xC0202009. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
End Error
Error: 2006-11-20 11:48:47.84
Code: 0xC0047021
Source: Data Flow Task DTS.Pipeline
Description: Thread "SourceThread1" has exited with error code 0xC0047038.
End Error
I've googled for most of the error messages there, and tried applying some of the things I found.
I've set the commit size on the OLE DB destination to 10k rows.
I've set the number of engine threads to 2.
The SQL Agent service is started by a domain user that has sufficient server and database roles to do what it needs - other packages run fine.
I'm really stumped here now - this package will run perfectly in visual studio, but fails when ran
as a scheduled task, and I'd really appreciate any advice or pointers
Hello,
I'm having problems scheduling a package and using the "Set Values" option. I'm setting a variable value to a connection string for a Connection Manager (I couldn't set it to keep the password using the "Data Sources" tab), however, this raises an error on SQL Server Agent:
Executed as user: SEQM001SYSTEM. Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Argument ""Package.Variables[LogDBConnString].Value;Data Source=123.456.789.000;Initial Catalog=myDB;Provider=SQLNCLI.1;Uid=myUser;Pwd=myPassword;Auto Translate=False;"" for option "set" is not valid. The command line parameters are invalid. The step failed.
However, if I copy the command line generated and run it using dtexec, it all goes perfectly fine. Any clue to what's wrong?
Thanks in advance