Scheduling Stored Procedures For MS SQL Server 2000
Mar 31, 2005Is there any way to make MS SQL Server 2000 to perform some stored procedures, say 3 times a day? If so, how? Thanks.
View 2 Replies
ADVERTISEMENT
Creating Stored Procedures In SQL Server 2000
Dec 12, 2006sivanantham writes "How to create Stored Procedures in SQL Server 2000?
also give me samples with Cursors and all
Thanks
Sivanantham"
SQL Server 2000 SP4 Not Importing Stored Procedures
Jan 22, 2007HiI'm running a Windows 2000 SP4 Server which has SQL Server 2000 SP4running.My problem is whenever i try to import a database over from one serverto the other the tables/data etc imports but the stored procedures andviews are not imported over and when i try to select these to importthey do not appear in the list. Any ideas on whats up?Many Thanks in advanceT
View 1 Replies View RelatedPerformance Of Extended Stored Procedures In SQL Server 2000
Jul 23, 2005What is the overhead of using extended stored procedures?I created a table with 500,000 rows.1) I ran a select on two columns and it runs in about 5 seconds.2) I ran a select on one column and called an UDF (it returns aconstant string) and it takes 10 seconds.3) I ran a select on one column and called a UDF that calls an extendedstored procedure that returns a string and it takes 65 seconds.I also tried running test 3 with 4 concurrent clients and each clienttakes about 120 seconds.
View 1 Replies View RelatedForce SQL Server To Recompile Stored Procedures Every Time They Run (SQL Server 7/2000)
Apr 27, 2005This is a solution for a very specific problem, and it's one that you'll hardly ever use, but it's important to know about that one scenario where it can save your neck. Ordinarily, stored procedures are only recompiled if they're no longer in the procedure cache. But if a stored procedure's execution plan is still in the cache, then SQL Server reuses the compiled storedprocedure and its existing execution plan. This is almost always the best course of action. Almost always, but not always.Sometimes, however, reusing an existing plan doesn't offer the most efficient performance. Imagine, for example, that your stored procedure accepts a parameter that determines the natureof a JOIN operation. The results can vary in a big way, so you wouldn't want your procedure to be locked into an execution plan that might be completely inappropriate for that JOIN. In a highlyspecialized case like this, you might want to force SQL Server to recompile the procedure every time the procedure runs. Doing so comes at a performance cost, but this might be offset by thesavings you gain in not executing the procedure with an awful compiled execution plan. Consider carefully whether to use this approach (or whether to re-engineer the over-design of yourapplication to avoid this situation in the first place). Should you need to instruct SQL Server to recompile each time, add the WITH RECOMPILE directive to the procedure, like this: CREATE PROCEDURE ProcName @Param int /* ... other parameters */ WITH RECOMPILE AS /* ... procedure code follows */
If we omit "WITH RECOMPILE", what will be the consequence? Thanks
Migrating SQL Server 2000 Stored Procedures To SQL Server 2005
Dec 20, 2007I have successfully moved my data from a SQL Server 2000 hosting site to a SQL Server 2005 hosting site. I Made a backup of my database using Enterprise Manager (2000) and imported the database tables using SQL Server Management Studio (2005). I do not know how to move the 25 or so stored procedures that I have in SQL Server 2000. I have a very short amount of time to figure this out and am hoping that someone can give me a brief step by step answer on how to get this done. I would appreciate any information you can provide. Thank you!!
View 5 Replies View RelatedHOW To Pull Merge Subscriptions In SQL Server 2000 Using Stored Procedures ??? (URGENT)
Dec 15, 2005I've successfully carried out pull subscription using Wizard in SQL server 2000.
But NOW its the time to deploy the project & I've to do it programatically........
i tried to use the default stored procedures like "sp_addmergepullsubscription ", "sp_addmergepullsubscription_agent ", "sp_reinitmergepullsubscription ", with respective parameters.
Then using replmerge.exe i tried to execute the batch file But could not succeed......
Can anyone guide me from the Basics ??? (i knw the Replication Architecture its heirarchy....but have NO idea of performing it Programatically......!!!!!!!!)
by BASICS, i mean......how should i execute the resp. stored procedures with what parametes & the order i should follow in order to successfully pull a merge subscription in SQL server 2000.
if a Sample code is mentioned as example, would be better for me to understand....
Thanking all of you in anticipation...........
Mandar
Stored Procedures 2005 Vs Stored Procedures 2000
Sep 30, 2006Hi,
This Might be a really simple thing, however we have just installed SQL server 2005 on a new server, and are having difficulties with the set up of the Store Procedures. Every time we try to modify an existing stored procedure it attempts to save it as an SQL file, unlike in 2000 where it saved it as part of the database itself.
Thank you in advance for any help on this matter
Sql Server 2000 - Scheduling A Job?
Jul 11, 2006I'm going to be creating a few triggers on tables to add new records to a seperate table (AlertData). Come 6pm or so I want a scheduled job to automaticaly run to make an HTTP wbe request to my SendAlerts.ASPX page. The page will simply make a database call for all users and the AlertData table contents, build what it needs and send out all the email alerts.
My question is is how do i create such a scheduled job under Sql Server 2000? It should run everyday at 6pm EST (even if the dbase server is restarted) and make an HTTP web request to my URL.
Thank you.
Scheduling In SQL Server 2000
May 3, 2006Hi all,I have a case :I have an employee SQL-View (not table) in my sql server 2000 database. This view actually connect to an oracle database server, because all our employee data is located on the oracle database server.This linked server soon proven to be the cause of poor application performance (response time is very slow). So we decide to put a local copy of employee table in our sql server 2000 database. We have successfully copy it to our database. But the most up-to-date employee data is still reside on oracle server. To deal with this problem we need to scheduling a sinchronization between sqlserver 2000 and oracle everyday at 01:00 o'clock midnight.I never get task like this before, how to make a scheduling in sql server 2000? my friend suggest a dts scheduling but unfortunately I haven't found any tutorial about this for beginnerthanks
View 1 Replies View RelatedScheduling Tasks In SQL Server 2000
Nov 9, 2006Hi all
I want to schedule a task that checks if a file(s) exists on d:Acc and then run the sql script shown below i.e. with the file(s) to load the content of the file(s) every day new files will be loaded. after the file(s) are loaded the file(s) are deleted.
I currently can achieve the above using Java and sql server and running the program as a scheduled task... (only reason for change would be that i wouldnt require java, JDBC etc to run the software it would be easy manage, migrate etc)
I wanted to find out if it can be done with sql server directly? (i.e. check if file exist and ased on that carryout the task or other wise just ignore) What do i need to look for? does sql server have a procedural language in it to be used for such thing? does sql server have an inbuilt task scheduler?
I am currently using the following script in a java program please note that i have used fixed values in this script for readabliity (of what i am doing)..
@bulk_cmd varchar(1000)
SET @bulk_cmd = 'BULK INSERT AccInv..VW_AccInvoice
FROM ''d:Invbatch2001.txt''
WITH (FIELDTERMINATOR = '','', ROWTERMINATOR = '''+CHAR(10)+''')'
EXEC(@bulk_cmd)
Scheduling A Job Containing A DTS Package On Sql Server 2000
Jul 20, 2005I've tried several different possibilities but don't have enough basicunderstanding of the ownerships and permissions that are involved soI'm looking for someone to explain what is required:I created a DTS package that includes a drop table, create table, anddata transformation task. Originally, my owner was local to the pcworkstation with administrator priveleges. When I executed thepackage on demand (manually, not scheduled), it runs just fine. Noerrors. When I schedule the package to run at a scheduled day/time,it fails with an access is denied message.I originally was using the sql admin user and password in theconnection but the view job history kept referencing "Executed asuser: sqlservernameSYSTEM...." and errored with an access is deniedmessage. Where did it get the SYSTEM user from since my connectionused the sql admin user in my DTS package? Do I need to determine howto get the sql admin user or should the SYSTEM user really have to runthis scheduled job? How do I get the sql admin user to show as the"executed as user"?I created another admin user to see if it had someone to do with thesql admin account but I got similar results. I tried creating thepackage as an NT domain user but got similar results.I'm sure it has something to do with permissions and ownerships but Ireally don't have a clear understanding of how it was intended towork.Any advise you can give is greatly appreciated. I've read alot ofpostings and I'm still not clear on the requirements.
View 2 Replies View RelatedOracle Stored Procedures VERSUS SQL Server Stored Procedures
Jul 23, 2005I want to know the differences between SQL Server 2000 storedprocedures and oracle stored procedures? Do they have differentsyntax? The concept should be the same that the stored proceduresexecute in the database server with better performance?Please advise good references for Oracle stored procedures also.thanks!!
View 11 Replies View RelatedDTS Import - Error Handling And Scheduling- SQL Server 2000
Mar 10, 2002Hi,
I would like to transfer data from an oracle database to SQL server database 2000. I am using DTS Export/ Import Wizard for this purpose.
My queries are:
1. How can I write the write the Start time, End time, data records that failed to a log file with minimal amount of coding. (I found that Active X scripts can be written although the coding is quite complex).
Can I get some kind of pointers to simple coding that can ensure I log time of run of DTS and errors if they occurred.
2. There is an error log written by DTS, but this is written only if an error occurs and the details of error are not written. I am looking to log successful transfers too. Can the DTS package be modified, with minimal code to achieve this objective?
3. I tried scheduling the DTS through the Edit window that SQL Server 2000 provides but am not able to change the time of schedule.
How do I schedule it?
Thanks,
Karthik
Scheduling The Legacy DTS 2000 Packages In Sql Server 2005?
Sep 12, 2007
Hi Experts
I am trying to schedule a legacy DTS 2000 package in 64 bit Sql Server 2005.
I cannot use the DTSRun tool on the Command prompt of the Sql 2005. What about dtexec ?Can i run Sql Server 2000 DTS packages from the Command Prompt.
Is DTS 2000 the only way to do that?
Any Advise is greatly appreciated
Vic.
Stored Procedures In Sql 2005 Vs. 2000
Jun 11, 2007Hi!
I use sql 2005 express on my computer for testing. The server that hosts my site is a sql 2000 server. Therefore I tuned the one database I use down to sql 8.
When I create stored procedures from web developer express, to the local sql 8 database I have in my sql express, it works nice. But when I copy all my files and my stored procedure to the webhost, it doesn't work.
Do you guys have any suggestions?
Thanks in advance.
How To Transfer Stored Procedures To 2005 To 2000
Feb 16, 2007Hi gurus
i have a assignment on hands to transfer store procedures of 2005 to 2000. I have tryed by scripting SPs and then runing them in 2000 QA, but it gives me error every time ....... so please help me to resolve this problem.
thanks
shekhar
Breakpoints In Stored Procedures SQLSERVER 2000
Nov 28, 2007
When i want to debug the stored procedure in SQLServer2000 query analyzer
the stepInto button gets disabled so it executes sp rather than debug.
Exec sp_sdidebug 'legacy_on' is not working.
Thanx in advance
Scheduling Execute Procedures
May 18, 2008Hi
i want to Schedul a stored procedure to execute every day and send the result by email to specifed email address.
Does any one know how to execute this procedure??
Scheduling Execute Procedures
May 18, 2008Hi
i want to Schedul a stored procedure to execute every day and send the result by email to specifed email address.
Does any one know how to execute this procedure??
Restored SQL 2000 Backup, Stored Procedures Don't Work
May 6, 2006Hello
I have restored a SQL 2000 backup of my database, ever since my web applications are unable to use any of the stored procedures.
I get the following error:
Could not find stored procedure 'xxx'.
If I use enterprise manager and go to the procedures tab the procedure appears there.
Any ideas what is up?
PS: The username has been changed, before the backup it was "user1" now its something else. For some reason it still shows that the procedure object is owned by "user1". Could this be the problem?
Thanks in advance.
What System Stored Procedures Have Changed Between SQL 2000 And SQL 2005?
Aug 2, 2006What system stored procedures have changed between SQL 2000 and SQL 2005?
View 4 Replies View RelatedRunning Scheduled Stored Procedures MSSQL 2000/2005
Jul 15, 2007Hi allI am looking for the best method to automate a website's database management. Lets say I have a user registration database and the users register. This sends an automated email to the user with a link to activate the users registration. If the user does not register within 24 hours, his registration must be automatically deleted from the database using a stored procedure.I know how to do this using the global.aspx file, however there must be an alternative way of doing this, especially if the database is an SQL database. I do not know how much MSSQL server access is given to a developer by an as ISP who hosts the website.Can anyone tell me what would be the best method to use.ThxWarren
View 1 Replies View RelatedStored Procedures On SQL 2000 Compared To Dotnet's Datatable.select
Jul 20, 2005Hi,Has any one ever compared the performance of calling a DataTable'sSelect method with a stored procedure doing the same thing?My point is:dataRows = DataTable.Select(filter) is better orPassing paramters to stored procedure?The datatable holds about 500-700 rows at any given time.If I select one of the approaches the business logic will go intorespective layers.With dotnet in picture what would be a good approach- Have the data in Datatable and do a filter on the data or callstored procedures which has been the convention.Can some one pl. suggest?
View 3 Replies View RelatedMSSQL 2000: Scheduling Jobs?
Sep 22, 2006Yao,
Could anyone help me with, or point me to information regarding, scheduling jobs for MSSQL 2000? I need to execute a SQL Command, monthly, which sets a budget field to a fixed ammount, something like: UPDATE Programs SET Budget = 500.
--Kyle Johnson
Scheduling Legacy DTS 2000 In Sql 2005
Sep 7, 2007Hi Guys
There are a few dts packages in our sql server 2000 database which we schedule daily for at night for business purposes.
how can i schedule the same DTS packages in Legacy SQL 2000 DTS when we migrate the Databases across to Sql 2005.
Can that be done or we need to migrate the DTS Package to SSIS
Vic
SQL Server 2000 - Proper Backup Procedures
Jul 24, 2006Hi everyone I am fairly new to SQL server and need some help with creating backups. I am a little confused whether to append or overwrite my backup data when saving full, differential and transaction log backups to disk. Below is my current backup schedule.
1) A full backup every night at 2:00a.m. that overwrites my existing backup. Should this be an appended backup? Wouldn't my file keep growing? How do I manage the backup file size?
2) Differential backups every two hours that is set to append. How do I stop this file from growing? Should I be controlling the size of my backups through the backup set expiry option?
How do I incorporate transaction logs into my backup schedule and manage the size of the log? Should the log backups also be appended or overwriten?
I appreciate everyones help in advance.
Calling DB2 Store Procedures From SQL Server 2000
Feb 5, 2004I am trying to call DB2 stroe procedure from within SQL server 2000 using DTS. I have the IBM odbc driver installed on the server. I have created an ACtiveX script to run in DTS and it fails staing it could not findor load the DB2 store procedure.
Has anyone come across doing this and how they did it?
THanks for the help....
SQL Server Stored Procedures/VB.Net
Mar 24, 2004IS there a way inside code for vb.net to programmatically change sorting in a stored procedure???Reason is I need a two way sort and did not want to have to write a SP for each way ....If so Do you have an example.....
View 3 Replies View RelatedStored Procedures In Sql Server 6.5
Jan 4, 2000Hi,
Everytime after I restore any database on the sql server 6.5, I have to recompile all the stored procedures in that database.Is there any method to overcome this problem?
Thanks,
Manu.
ADO And SQL Server Stored Procedures
Apr 19, 1999Trying to run a SQL Server 6.5 stored procedure via ADO 2.0 in Visual Basic 6. The stored procedure moves roughly 10000 records from one table to another within the same database. The procedure works just fine when run from a SQL editor such as I/SQL, but only transfers a few hundred records when it is executed from a VB application using ADO 2.0.
The guilty code can be seen below. Any thoughts?
Public cnSQL As New ADODB.Connection
Public qry As New ADODB.Command
With cnSQL
.ConnectionString = ConnectStringSQL
.ConnectionTimeout = 20
.Open
End With
Set qry.ActiveConnection = cnSQL
qry.CommandType = adCmdStoredProc
qry.CommandTimeout = 120
qry.CommandText = "sp_VGInsertBOMStructure"
qry.Execute
Peter
ADO SQL/Server Stored Procedures
Jun 6, 2002I have a stored procedure on SQL/Server 2000 that inserts into a #temptable. When I execute it from Query Analyzer it works fine.
When I execute it from an ASP using ADO it gives me an Open Error message. When I comment out the
#temptable the ASP works fine. Can someone shed some light on this? Do I have to do an ADO opent on the
#temptable?
SQL SERVER Stored Procedures
Apr 11, 2006Is there any application which can tell you the procedure called within a procedure.
View 2 Replies View Related