I am facing a SQL 2005 SSIS problem.
I have an SSIS package that downloads some data from an AS400 and places the data into a SQL 2005 table.
I use Client Access ODBC connection as my Source.
When I run the package from Business Intelligence - Visual Studio, it works fine.
However when I schedule the SSIS package as a job, it falls over with the following error:
Description: System.Data.Odbc.OdbcException: ERROR [08S01] [IBM][iSeries Access ODBC Driver]Communication link failure. comm rc=11004 - CWBCO1011 - Remote port could not be resolved
Please can someone help me......
Ric
By the way this is the full error message below:
Error: 2007-08-08 14:00:47.85
Code: 0xC0047062
Source: Data Flow Task DataReader Source [893]
Description: System.Data.Odbc.OdbcException: ERROR [08S01] [IBM][iSeries Access ODBC Driver]Communication link failure. comm rc=11004 - CWBCO1011 - Remote port could not be resolved
at System.Data.Odbc.OdbcConnection.HandleError(OdbcHandle hrHandle, RetCode retcode)
at System.Data.Odbc.OdbcConnectionHandle..ctor(OdbcConnection connection, OdbcConnectionString constr, OdbcEnvironmentHandle environmentHandle)
at System.Data.Odbc.OdbcConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.Odbc.OdbcConnection.Open()
at Microsoft.SqlServer.Dts.Runtime.ManagedHelper.GetManagedConnection(String assemblyQualifiedName, String connStr, Object transaction)
at Microsoft.SqlServer.Dts.Runtime.Wrapper.IDTSConnectionManager90.AcquireConnection(Object pTransaction)
at Microsoft.SqlServer.Dts.Pipeline.DataReaderSourceAdapter.AcquireConnections(Object transaction)
at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostAcquireConnections(IDTSManagedComponentWrapper90 wrapper, Object transaction)
End Error
Error: 2007-08-08 14:00:47.87
Code: 0xC0047017
Source: Data Flow Task DTS.Pipeline
Description: component "DataReader Source" (893) failed validation and returned error code 0x80131937.
End Error
I have a package that I want to run as a scheduled job in sql server 2005. The job runs fine in the studio. I am convinced that it is not a password or security issue as I set the protectionlevel to do not save sensitive data and can still run the job in the studio. The User running the job has SA privileges as does the SQL Server Agent. The job reads a flat file, runs it through a script and than inserts the rows into a table. The job runs successfully only if the flat file is empty. The job history says: The return value was unknown. The process exit code was -1073741795. The step failed.
Test connection failed because of an error in initializing provider. The host resource could not be found. Check that the Initial Catalog value matches the host resource name. SQLSTATE: HY000, SQLCODE: -360
We have a few SSIS jobs that we are currently manually kicking off after we are sure that certain AS400 jobs have run. We want to completely automate this process, so that we don't have to babysit. What is the most efficient way to do this? In the past (on SQL Server 7 no less) I've seen the 400 job setting a flag to 'Y' in a 400 file, FTPing it down to a flat file, and then the SQL job running every five minutes checking the flag. When it was 'Y', the SQL job would run. We do not have the option of using FTP here. Any suggestions would be appreciated! After the job runs, we'd like it to kick off a report as well
We are having trouble connecting to an IBM DB2 on iSeries data source in SSIS. In SQL2000 DTS we had no trouble connecting to this data source using an ODBC DSN. We have tried using the OLE DB providers for iSeries that comes with SQL2005. We are able to connect, but are unable to retrieve column information to use in mapping to a SQL2005 data destination. Has anyone successfully made this type of connection and data flow in SSIS? If so, please tell us how you did it. Thanks in advance!
I am trying to connect to an AS400 to download data to a 64bit sql server 2005 server. I am able to do this easily by migrating existing sql2000 DTS packages but how do i do this is in an SSIS project creating the process from scratch? and how do i incorporate activex transforms like you could in DTS2000 into the trasnform with copy columns?
Please help i am slowly turning grey trying to get this to work.
I created a SSIS package moving data from a SQL 2005 table to an existing DB2 table on AS400 using Microsoft OLE DB Provider for DB2.
When the package was run, it showed that rows were successfully inserted to DB2. However, the data didn't seem to be converted correctly. Most of the string values were inserted as unusual characters. Also any string values of digits were not inserted.
For example, 1.) a character field (char(1) or nchar(1) as I have tried both types) in SQL 2005 table with a simple value of 'H' was inserted into the DB2 table field of type "A" (alphanumeric) of length 1 as 'ç' and others letters were inserted as other unusual characters. 2.) A string value of '00100' in SQL Server is not inserted to DB2 table at all.
Later we found that the fields inserted with usual characters are difined as CSSID =65535. A few fields with correct data inserted have CSSID=00037.
Does anyone know why this happened and how to solve this to get the data inserted correctly in the DB2 table?
I would like to find out how would I call an AS400 (IBM DB2) iSeries Stored Procedure from within my SSIS Package. What tasks should i be using? and do I need any additional adapters installed on my machine to access AS400(IBM DB2). Thanks.
I'm trying to get data from AS400. using OLEDB source as my connection. i'm using IBM OLEDB provider for iSeries. and working on standard edition of SQL Server 2005.
While using OLEDB source task when i set my access mode to 'table or view' and try to see list of available libraryname.tablenames, i do not get and tables
where as when i use Data access mode as 'SQL Command' i can get data (can only see preview of data) from AS400 but not able to insert that into my destination table. At run time task Fails with the error mentioned below.
I have configured Data links tab inside the OLEDB connection manager also, but when tried to set a default library it gives me error. : "Error code :CWBZZ5042" - ( catalog is invalid ) but it does exist.
Is there some settings that needs to be done from AS400 side or SQL Server side to view the available libray and its tables ?
Can some one help me on the same.
thanks in advance
Shah
Error Message received when executed with SQL command:
Error: 0xC0202009 at Data Flow Task, OLE DB Source [1]: An OLE DB error has occurred. Error code: 0x80040E00.
Error: 0xC0047038 at Data Flow Task, DTS.Pipeline: The PrimeOutput method on component "OLE DB Source" (1) returned error code 0xC0202009. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: Thread "SourceThread0" has exited with error code 0xC0047038.
Error: 0xC0047039 at Data Flow Task, DTS.Pipeline: Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: Thread "WorkThread0" has exited with error code 0xC0047039.
I have developed an SSIS Package which uses an ODBC connection to an AS400 iseries stored procedure. I use an Execute SQL Task. The query is Call Doctrack.PubFeed(?,?,?,?). The procedure takes 2 input parameters and 2 output parameters (3rd and 4th parameters) The data types of the output parameters are an integer and varchar.  As part of the procedure data is inserted into a table on the iseries.Â
When I run the package using breakpoints to view the values of the variables I see that the stored procedure returns values for the output parameters and the execute SQL task is a success and proceeds to the next task in the package. The whole package ends successfully.However, when the table on the iseries is checked nothing has been inserted into it. To test further, I manually run the procedure on the iseries using the same parameters. The run is successful. And when the table is checked, there are in fact new rows inserted.
What can possibly be the issue since I am not getting any errors when I run the package? Oh I should add that prior to the execute Sql Task, there is a data flow task which moves data from a SQL Server database to a table on the iseries (successfully) using the same ODBC connection. The execute sql tasks uses that information for the Stored procedure.
Please help me with SQL Agent to Scheduling my SSIS Job.
Things I had done.
I had created a Job in SSIS Opened Microsoft SQL Server Management Studio Navigated to SQL Server Agent Folder, and right clicked on jobs to create a new job.
Named the job as €œDIM€? and in Owner €œSelect login€? window I€™m only getting two options €œNT AUTHORITYNETWORK SERVICE€? & €œNT AUTHORITYSYSTEM€? No idea about what to do here.
Category selected Uncategorized [Local]
Clicked the Enabled
Went in Steps clicked New Given Step name
Type as €œSQL Server Integration Services Package€?
Run as SQL Agent Server Account
In General Tab
Package Source as File System
Package: Selected the path of package
Next step Scheduling in Scheduling properties given the name scheduled it.
This are the steps done to achieve the scheduling of a SSIS job but the job is unsuccessful. The massage I€™m getting in job history is this
The job failed. The Job was invoked by Schedule 5 (dim). The last step to run was step 1 (dim). Can any one help me out in getting this job done
I'm new in SSIS Development. I have manage to design and deploy my Package to production SQL(MSDB) Security rely on server storage.
The problem start when I start scheduling in SQL JOB I'm getting the following error.
Executed as user: UCC-SQLSYSTEM. ...ion 9.00.3042.00 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 8:57:01 AM Error: 2008-05-12 08:57:02.08 Code: 0xC0202009 Source: Test_deployment_Table Connection manager "BLAKE-DBN12.Staging" Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E4D. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E4D Description: "Communication link failure". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E4D Description: "TCP Provider: An existing connection was forcibly closed by the remote host. ". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E4D Description: "Login failed for user 'BLAKEUCC-SQL$'.". End Error Error: 2008-05-12 08:57:02.08 Code: 0xC020801C Source: Data Flow Task Test_Deployment [97] ... The package execution fa... The step failed.
I have created a SSIS Package to complete various tasks and I have managed to deploy it on SQL, however I can't find it in the Management Studio. I just want to be able to schedule this package to run as a job.
Hi I have a strange scheduling problem. I have a job, i test it through BIDS - Works I test it through SSMS - works I run the job - Works I schedule for a run time job - Works I schedule for a recurring job - Works
However (here is the really annoying part) it fails to run at the night run (11.20PM) there are 6 other packages that run fine after it , 11.30 , 1AM .. 4 AM etc ...
So last night I changed the package to run at a later time, and it worked, but the other package that ran 2nd (which now ran 1st) failed !!
its almost as if the 1st package has to fail !!!!! When i look at the history and detailed log all it says is "The step Failed"
anyway , I can set up a workaround by starting a dummy job that is supposed to fail..
FYI the jobs are run under administrator and they are protected by a password (encryptSensitiveWithpassword) .
I am trying to scheduling package using "Executing Sql Server Agent Task" before that I create new job,But there is error in STEP "Command Line Parameter are Invalid"
but i found two problem 1. when i try to kill job, it simply turn into killing status but infact countinue executing, perhaps it takes to much time to be killed 2. whenever any occure in packge, the job history does not reflect it and simply shows successfull completion.
so is there any efficient way to schedule the SSIS other then i have mentioned or is it possible to make any improvements in this.
I want to schedule an SSIS package to run always. So I tried scheduling the SSIS Package as a Job in the SQL Server Agent and I have set the Schedule Type as "Start automatically when SQL Server Agent Starts".
I have used an WMI Event Watcher task to raise an event when the file dropped in a folder.
And I have provided the configuration file also properly in the job. But still my package is not running properly. The application is running, but it is not raising any events even when the files are dropped in that folder.
Hi I have a strange scheduling problem. I have a job, i test it through BIDS - Works I test it through SSMS - works I run the job - Works I schedule for a run time job - Works I schedule for a recurring job - Works
However (here is the really annoying part) it fails to run at the night run (11.20PM) there are 6 other packages that run fine after it , 11.30 , 1AM .. 4 AM etc ...
So last night I changed the package to run at a later time, and it worked, but the other package that ran 2nd (which now ran 1st) failed !!
its almost as if the 1st package has to fail !!!!! When i look at the history and detailed log all it says is "The step Failed"
anyway , I can set up a workaround by starting a dummy job that is supposed to fail..
FYI the jobs are run under administrator and they are protected by a password (encryptSensitiveWithpassword) .
Hi all! I just started a new job, and im a junior programmer, so have no idea about anything yet... My boss asked me to run a SSIS package weekly. I found out that I can do it throught the SQLServer Agent job task. Am I right? As i'm not sure about it.
Well I configure it, first as a Transact-Sql with the cmdShell, and it gave me an error like I have to start the messenger Service, I cannot do it as i'm not as administrator. Any way to sort this problem out?
Another thing I could do, I guess is configure the job as a SQL Server Integration package, but it doesn't find my package. Should I save it in a special path??
Any help would be great! As I'm really lost in it, and I've been 3 days trying to sort it out, with no luck. My boss is expecting me to do it by tomorrow...
Oh... finally, I guess I should add a Execute sql job task in the SSIS package? I've already done it, but it may be wrong.
I am getting an error when I try to schedule a package. I can run the package with no problems from BIDS. For some reason it is throwing an error when I try to schedule the package using SQL Server Agent. Information on how to resove this would be greatly appreciated.
Executed as user: MACHINESYSTEM. ...n 9.00.1399.06 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 5:41:55 PM Error: 2007-02-19 17:41:56.01 Code: 0xC0011007 Source: {48427B5A-10F6-4054-B7EB-F0F19B90F334} Description: Unable to load the package as XML because of package does not have a valid XML format. A specific XML parser error will be posted. End Error Error: 2007-02-19 17:41:56.01 Code: 0xC0011002 Source: {48427B5A-10F6-4054-B7EB-F0F19B90F334} Description: Failed to open package file "C:Documents and Settingsfirst.lastMy DocumentsVisual Studio 2005ProjectsPackage 1.dtsx" due to error 0x800C0006 "The system cannot locate the object specified.". This happens when loading a package and the file cannot be opened or loaded correctly into the XML document. This can be the result of either providing an incorrect file name was specified when calling LoadPackage or the X... Process Exit Code 4. The step failed.
I have created the package in ssis and i want to schedule it local machine without using integration services. Any workaround for scheduling the Package?.
I have created and run SSIS packages from my workstation that are successful. When I Build and then Deploy the same package to the server and schedule it, it fails. I am using SQL authentication connecting from a SQL 2000 database to a SQL 2005 database via OLE DB connections.
The following is the exported result of the package...
05/09/2007 15:46:05,AMS_EnterpriseWarehouse,Error,0,AMSBINT1,AMS_EnterpriseWarehouse,(Job outcome),,The job failed. The Job was invoked by User JDEREP. The last step to run was step 1 (step1).,00:00:01,0,0,,,,0
05/09/2007 15:46:05,AMS_EnterpriseWarehouse,Error,1,AMSBINT1,AMS_EnterpriseWarehouse,step1,,Executed as user: AMSOILvector. Error: 2007-05-09 15:46:06.38 Code: 0xC0047017 Source: JDE Production to AMS BI 7332 DTS.Pipeline Description: component "F0005" (1) failed validation and returned error code 0xC020801C. End Error Error: 2007-05-09 15:46:06.38 Code: 0xC004700C Source: JDE Production to AMS BI 7332 DTS.Pipeline Description: One or more component failed validation. End Error Error: 2007-05-09 15:46:06.38 Code: 0xC0024107 Source: JDE Production to AMS BI 7332 Description: There were errors during task validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 3:46:05 PM Finished: 3:46:06 PM Elapsed: 0.75 seconds. The package execution failed. The step failed.,00:00:01,0,0,,,,0 05/09/2007 15:30:00,AMS_EnterpriseWarehouse,Error,0,AMSBINT1,AMS_EnterpriseWarehouse,(Job outcome),,The job failed. The Job was invoked by Schedule 29 (AMS_EnterpriseWarehouse). The last step to run was step 1 (step1).,00:00:01,0,0,,,,0 05/09/2007 15:30:00,AMS_EnterpriseWarehouse,Error,1,AMSBINT1,AMS_EnterpriseWarehouse,step1,,Executed as user: AMSOILvector. Error: 2007-05-09 15:30:01.15 Code: 0xC0047017 Source: JDE Production to AMS BI 7332 DTS.Pipeline Description: component "F0005" (1) failed validation and returned error code 0xC020801C. End Error Error: 2007-05-09 15:30:01.15 Code: 0xC004700C Source: JDE Production to AMS BI 7332 DTS.Pipeline Description: One or more component failed validation. End Error Error: 2007-05-09 15:30:01.15 Code: 0xC0024107 Source: JDE Production to AMS BI 7332 Description: There were errors during task validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 3:30:00 PM Finished: 3:30:01 PM Elapsed: 0.734 seconds. The package execution failed. The step failed.,00:00:01,0,0,,,,0 05/09/2007 15:20:00,AMS_EnterpriseWarehouse,Error,0,AMSBINT1,AMS_EnterpriseWarehouse,(Job outcome),,The job failed. The Job was invoked by Schedule 29 (AMS_EnterpriseWarehouse). The last step to run was step 1 (step1).,00:00:01,0,0,,,,0 05/09/2007 15:20:00,AMS_EnterpriseWarehouse,Error,1,AMSBINT1,AMS_EnterpriseWarehouse,step1,,Executed as user: AMSOILvector. Error: 2007-05-09 15:20:01.55 Code: 0xC0047017 Source: JDE Production to AMS BI 7332 DTS.Pipeline Description: component "F0005" (1) failed validation and returned error code 0xC020801C. End Error Error: 2007-05-09 15:20:01.55 Code: 0xC004700C Source: JDE Production to AMS BI 7332 DTS.Pipeline Description: One or more component failed validation. End Error Error: 2007-05-09 15:20:01.55 Code: 0xC0024107 Source: JDE Production to AMS BI 7332 Description: There were errors during task validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 3:20:00 PM Finished: 3:20:01 PM Elapsed: 0.703 seconds. The package execution failed. The step failed.,00:00:01,0,0,,,,0 05/09/2007 15:18:00,AMS_EnterpriseWarehouse,Error,0,AMSBINT1,AMS_EnterpriseWarehouse,(Job outcome),,The job failed. The Job was invoked by Schedule 29 (AMS_EnterpriseWarehouse). The last step to run was step 1 (step1).,00:00:01,0,0,,,,0 05/09/2007 15:18:00,AMS_EnterpriseWarehouse,Error,1,AMSBINT1,AMS_EnterpriseWarehouse,step1,,Executed as user: AMSOILvector. Error: 2007-05-09 15:18:01.53 Code: 0xC0047017 Source: JDE Production to AMS BI 7332 DTS.Pipeline Description: component "F0005" (1) failed validation and returned error code 0xC020801C. End Error Error: 2007-05-09 15:18:01.53 Code: 0xC004700C Source: JDE Production to AMS BI 7332 DTS.Pipeline Description: One or more component failed validation. End Error Error: 2007-05-09 15:18:01.53 Code: 0xC0024107 Source: JDE Production to AMS BI 7332 Description: There were errors during task validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 3:18:00 PM Finished: 3:18:01 PM Elapsed: 0.766 seconds. The package execution failed. The step failed.,00:00:01,0,0,,,,0
Any help would be greatly appreciated...
Jim
Additionally, when I run this from the command line, I get the following
Hello Everyone, When i try to scedule a job on SQL Server Management Studio it gives the Following Error:
Unable to cast object of type 'Microsoft.SqlServer.Management.Smo.SimpleObjectKey' to type 'Microsoft.SqlServer.Management.Smo.Agent.JobObjectkey'.(Micorsoft.SqlServer.Smo)
Can anyone tell me why ?
MS SQL Server Details:
Microsoft SQL Server 2005 - 9.00.1399.06 (Intel X86) Oct 14 2005 00:33:37 Copyright (c) 1988-2005 Microsoft Corporation Developer Edition on Windows NT 5.1 (Build 2600: Service Pack 2)
I'm trying to create a SQL Agent job and schedule that executes an SSIS Package, but when I try to run the job I get the following error:
Executed as user: adApp1. The package could not be loaded.
The App1 user is the Identity used in the Credential for the Proxy which has the SSIS Packages Subsystem. The package encryption is set EncryptAllWithPassword and that password is included in the Command line with the /DECRYPT option. The package is stored on the server in the SSIS Package Store and was placed there via the Import package option. Does the method matter?
One thing that I haven't been able to track down is exactly what permissions the domain account adApp1 needs on the server or in SQL Server, if any, in order to run the package. Not sure if that has any affect anyway.
I have migrated several (7) DTS packages to SSIS in a development environment. In this environment these packages all work as designed. I am now in the process of placing the .dtsx files on the production server and scheduling jobs around them.
I am encountering problems in 3 of these 7 packages. I get the following error:
Message The job failed. The Job was invoked by User <domainuser>. The last step to run was step 1 (Create and Transfer Credentialling Data). This is not what I would call very informative. I have opened the dtsx files in question in BIDS on the production server and each has the following error reported:
Error loading <name>dtsx; Failed to decrypt protected XML node "PassWord" with error 0x8009000B" Key not valid for use in specified state." You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available. I have looked at the package setting "Protection Level" and all seven packages have the same setting: EncryptSensisitveWithUserKey Each of the connections within the packages have been defined to utilize Windows Authentictation. And the jobs are set to run under the SQL Agent Account. What I find most puzzeling is that each of these packages are defined exactly the same and some work correctly and others do not. Thanks for taking the time help me with this issue.
I have an SSIS package that invokes a web service and then updates a table. It runs fine as long as I am running it on the local machine. However, as soon as I save this package to the sql server, and try to schedule this as a job, it starts to fail. Now, the web service writes to an xml file and also uses an xsd and and an xsl file. When I save a dts package to the sql server, whats the proper way of referencing these files? I think this probably is what is making the package to fail, ut I am not sure.
