Script Component Output Problem

Apr 8, 2008

Hi Guys,
I have a Data Flow which consist in a Flat File Source connected to a Derived Column that is connected to an Ole DB Destination

In the same Data Flow i have an script source task which i want to connect to the same Ole DB Destination mentioned before.

I cannot do that because it says that the destination component does not have any available imputs for use in creating a path.

I know the Script Source Task has an Output Column because i verified it.

Is it possible to connect a flat file source AND a script source to the same Ole DB Destination?

View 7 Replies


ADVERTISEMENT

How Make Script Component Output 2 Asynchronous?

Jul 6, 2007

I am working with the Data Flow Task Script Component for the first time. I have created a second Output. In my script I add rows to this output.



I have found that Ssis does not release those rows to the second Output until it has processed all of the incomine pipeline records. This will not work for me as there are going to be a few million records coming down the pipe, so I need the Script Component to as soon as possible release these records downstream for insert into the destination component Ole Db component.



Any help would be greatly appreciated?

View 8 Replies View Related

Error OutPut In Custom Source Component

May 11, 2006

For the Custome source Component ErrorOutput, should I go for asynchronous / synchronous Output.

If i go for synchronous output

// Create the error output.
IDTSOutput90 errorOutput = ComponentMetaData.OutputCollection.New();
errorOutput.IsErrorOut = true;
errorOutput.Name = "ErrorOutput";
errorOutput.SynchronousInputID = What Id is required here;
errorOutput.ExclusionGroup = 1;


Is it the IDTSOutput90 InPut.ID / OutPut.ID which should be assigned.

Thanks Regards

Anil

View 5 Replies View Related

Help On Script Component Assignment Of Output Variable

Sep 7, 2005

Hi all,

View 9 Replies View Related

(Newbie) Writing To The Output Of A Script Component

Apr 14, 2008

HI,

I have a script component in my SSIS solution that transforms a URL that points to a picture to an URL that points to a thumbnail of that picture.

I've added an output called Picture to the component, and an outputcolumn called ThumbnailUrl, the code in the component is as follows:

PictureBuffer.AddRow()
PictureBuffer.ItemID = Row.ItemID
PictureBuffer.Url = Row.CopyoffotText
PictureBuffer.ThumbnailUrl = Row.CopyoffotText.Replace("-220.jpg", "-68.jpg")

VS then gives the following error: "Name 'PictureBuffer' is not declared"

What did I miss?

View 3 Replies View Related

Adding Error Output To Custom Source Component

Dec 6, 2007

Hi all,
I saw a couple of other posts here on this topic, but none quite got to my issue.
I'm trying to add error output to a custom source component (not a script, a custom component). The samples all seem to deal with transform components, and my issues seem to be unique to source components.

I have the following code related to error handling ...

Public Overloads Overrides Sub ProvideComponentProperties()

...

Dim output As IDTSOutput90 = ComponentMetaData.OutputCollection.New

output.Name = OUTPUTCOLUMNNAME


output.ExternalMetadataColumnCollection.IsUsed = True

ComponentMetaData.UsesDispositions = True

output.ErrorRowDisposition = DTSRowDisposition.RD_NotUsed

output.ErrorOrTruncationOperation = "Something got truncated or blew up"

Dim errorOutput As IDTSOutput90 = ComponentMetaData.OutputCollection.New

errorOutput.Name = ERRORCOLUMNNAME

errorOutput.IsErrorOut = True

...
End Sub


Public Overloads Overrides Sub ReinitializeMetaData()


Dim output As IDTSOutput90 = ComponentMetaData.OutputCollection(OUTPUTCOLUMNNAME)

Dim outColumn As IDTSOutputColumn90 = output.OutputColumnCollection.New


outColumn.Name = strName

outColumn.SetDataTypeProperties(DataType.DT_I4, 0, 0, 0, 0)



Dim metadataColumn As IDTSExternalMetadataColumn90 = output.ExternalMetadataColumnCollection.New


metadataColumn.Name = outColumn.Name

metadataColumn.DataType = outColumn.DataType

metadataColumn.Precision = outColumn.Precision

metadataColumn.Length = outColumn.Length

metadataColumn.Scale = outColumn.Scale

metadataColumn.CodePage = outColumn.CodePage

outColumn.ExternalMetadataColumnID = metadataColumn.ID


outColumn.ErrorRowDisposition = DTSRowDisposition.RD_NotUsed

outColumn.ErrorOrTruncationOperation = "Something Truncated!"

outColumn.TruncationRowDisposition = DTSRowDisposition.RD_NotUsed

Dim errorOutput As IDTSOutput90 = ComponentMetaData.OutputCollection(ERRORCOLUMNNAME)

Dim errorColumn As IDTSOutputColumn90 = errorOutput.OutputColumnCollection.New

errorColumn.Name = outColumn.Name

errorColumn.SetDataTypeProperties(DataType.DT_I4, 0, 0, 0, 0)
...
End Sub

The confusions I have are:
a) the stock advanced properties editor (I haven't provided a custom one) doesn't seem to "realize" that I have an error output, so provides no method to configure. I am believing it would need to know which Output columns can have their error/truncation redirected. I'd have thought setting ErrorRowDisposition on my output column would have been enough to trigger this ??
b) since I don't have any means of configuring, not surprisingly, when I try to connect my error output, designer complains that, "Ths error output cannot receive any error rows. This occurs for several reasons: Input columns or output columns are not yet defined. Error handling is not supported by the component. Error handling is not configured for the component."
c) UsesDispoistions would seem to be appropriate only for a transform component

Thanks for reading, and appreciate any help or pointers.
Bill

View 5 Replies View Related

Change Output Alias On Synchronous Component Programatically

Nov 21, 2006



Wanted to enquire how this is done. Tried doing it in the setUsageType method I have overwritten but only allows description to be changed. Basically need to change "Name".

Best option would be to change it instantly when a user selects a column from the inputs in the custom component, ie. it changes the Output Alias to a desired value. (Input tab in advanced editor)

All this is being done in a custom component which I would like to be synchronous, can achieve a similar result asynchronously.

Thanks

View 2 Replies View Related

Union All Component Silently Changes Output Field Length

Jul 25, 2007

To simulate problem do follows:

1. Add Script source component.

2. Add 2 string output collumns: F1 length 50, F2 length 110

3. Add Union All component connected to Script source component

4. Add Script transformation component connected to Union All component

5. Mark F1 and F2 as input collumns

6. In the Input and Output section of the script transformation component check that length of the fields is 50 and 110 correspondingly

7. Edit Union All component: change Union All Input 1 to <ignore> for Output collumns F1, and F2; change Union All Input 1 to F2 for F1 and F1 for F2; change back <ignore> for F1, <ignore> for F2; set back F1 for F1, F2 for F2; Click OK to save

8. In the Input and Output section of the script transformation component check that length of the both fields is 110 now.



So, be careful to select output columns values in Union All component. If you choose wrong field by accident, and replaced it with correct one straight away, the length of output column could be stored not as you expect an need.

View 5 Replies View Related

How To Access Output Column Length Within Script Component?

Mar 7, 2007

My script component defines a (DT_WSTR, 450) output column named keyword. How can I access its length within the script, instead of hard-coding 450 as a constant?

My feeble attempts to tease this out through Visual Studio got me this far:

Output0Buffer.keyword.GetType.GetProperty("Length").GetValue(

but now I'm stuck. Also, if it matters, this is an asynchronous transformation component.

Thanks!

View 1 Replies View Related

Consuming Error Output From A Derived Column Component

Apr 16, 2007

Hi,

I have created a program that imports a csv into the sql server. but during that import I need to track all the errors that occured for some malformed rows. I think I need to use the error output collection of the dataflow components to track the errors. I figured out that every dataflow component has a error output collection along with the data output collection. I want to write those error outputs into a separete database. So, I have created a SQL server data destination component and created a path between derived columns error output and it input collection. But it is not working as expected. can any body help on this?

or can anyone give me any example how to use/handle error output collection in SSIS?



I will appreciate all kind of suggestions.



thanks

View 2 Replies View Related

SSIS Custom Component, Output Buffer Problem

Mar 27, 2007

Hi Guys,

I created a SSIS custom component, transformation (Asynchronous) with one Input collection and 2 output collections.

The SSIS Package which includes the Component I created works well in the Business Intelligence Studio, but when the same Package is run in the 'Execute Package utility' It fails to run. ( when you Double click on the dtsx file)

The cause of the failiure is

public override void PrimeOutput(int outputs, int[] outputIDs, PipelineBuffer[] buffers)

method receives only one output buffer when executed using the 'Execute Package Utility' { outputs = 1 , buffer.Length = 1 } ( when executed in the BI studio, the method receives parameters of both the output buffers that I expect { outputs = 2 , buffer.Length = 2 } )

The property ComponentMetaData.OutputCollection.Count = 2 as well. Yet the PrimeOutput method provides only 1 buffer.

The Validation Succeeds on both instances, which I assume means that Meta Data is Provided Properly.


What would be the reason for the same pakage to run in 2 different ways like this,

What might I have missed out to do, to make the package run in different ways on 'Business Intelligence Studio' and 'Execute Package Utility'

Thanks a lot



Below are some of the lines from the ProvideComonentProperties Method which deals with the output Collection, Isn't this sufficient for the PrimeOutput to provide 2 output buffers?





ProvideComponentProperties()









public override void ProvideComponentProperties()
{

RemoveAllInputsOutputsAndCustomProperties();
base.RemoveAllInputsOutputsAndCustomProperties();
base.ProvideComponentProperties();

//other function calls

IDTSOutput90 output1 = ComponentMetaData.OutputCollection[0];
output1.Name = "Output1";
output1.Description = ".......................";
extracted.SynchronousInputID =0;


IDTSOutput90 output2 = ComponentMetaData.OutputCollection.New();
output2.Name = "Output2";
output2.Description = "..........................";
output2.SynchronousInputID = 0;

//other function calls
}

View 3 Replies View Related

Custom Transform Component, Change Type Or Add Output Column

Jun 26, 2006

Would anyone happen to have any pointers or know of any good code examples to either programmatically change the type of an input column when it is passed through the component, or add a new column to the output? I am extracting data from an Oracle database which is in Julian date format (represented within SSIS as a DT_NUMERIC column) and I need to to either transform the input column holding it into a date column, or to dynamically add a new output column holding the transformed data.

Many thanks

View 1 Replies View Related

When To Create Columns And Metadata For Custom Asynchronous Component Output

Apr 17, 2006

I'm having a tad bit of trouble getting output from an asynchronous component that I've written and am looking for some insight.

This component takes in a name string passed from upstream and parses the name components into standardized output fields. I'm using an asynchronous component because if the name string contains two names ("Fred & Wilma Flintstone") I'm outputting one row for Fred and one for Wilma. I've gotten it to run and with debugging have observed what appeared to me to be proper execution, but zero rows are flowing out of it.

In my ProvideComponentProperties method, I add the three fields and there associated metadata to the OutputColumnCollection. Is this method where this should occur? It's before the PrimeOutput method, so I didn't know if I should be creating the output columns in ProcessInput (i.e., after the output buffer is provided by PrimeOutput.)

In ProcessInput, I'm using AddRow for each input row and another if it contains a second name, setting the value for each index using the buffer's SetString method, to no avail. I can observe it to this point, but then don't know what's in that output buffer (if I'm using the wrong buffer index value, etc)

Thanks.

View 3 Replies View Related

Create Output Columns Based On Input In Custom Component

Aug 28, 2007



I'm trying to create a fairly simple custom transform component (because I've read that's the easiest one to create) which will take one column from a flat file source and based on the first row create the output columns.
I'm actually trying to write a component that will solve the now well known problem with parsing CSV files in SSIS. I have a lot of source files and all have many columns so a component that can read in the first line from the CSV file and create the output columns automatically will save me lots of time when migrating the old DTS packages.

I have the basic component set up but I'm stuck when trying to override the OnInputPathAttached method because I don't know how to use the inputID to get the first line from the input (the buffer).
Are there any good examples for creating output columns dynamically based on the input buffer?
Should I just give up on on the transform and create a custom source component instead?

View 5 Replies View Related

Integration Services :: Custom Source Component - No Datatype Set When User Add Output Column

Aug 17, 2015

I'm writing a custom source component that reads data from a SharePoint list with dynamic mapping to output columns. It's my first custom component and it's based on several samples and tutorials from Internet

Output columns are not created by the component itself, they must be added by user at design time. The component makes dynamically an association between SharePoint fields and available output columns at run-time (based on an mapping table).

I made a very basic skeleton and I encounter a problem when I add a column to output: it has no datatype and when I try to set one I have an the error Property value is not valid, The component xxxxxx does not allow setting output column datatype properties.

Imports System
Imports Microsoft.SqlServer.Dts.Pipeline
Imports Microsoft.SqlServer.Dts.Pipeline.Wrapper
Imports Microsoft.SqlServer.Dts.Runtime.Wrapper
<DtsPipelineComponent(ComponentType:=ComponentType.SourceAdapter,
DisplayName:="SharePoint Dynamic Assoc List Source",

[Code] ....

View 4 Replies View Related

The Component Metadata For Component DataReader Source (1113) Could Not Be Upgraded To The Newer Version Of The Component.

Oct 26, 2007

Hello,

I have a package that has a data lfow task. this task imports data from a db2 database (using the IBM Ole DB provider fro db2) and adds it to sql server database table. This package was created on the server. then though version control (using TFS source control) I check out the package on my local machine. and when I open the package I get the foll 3 errors.

Error 1 Validation error. Import Account Num from BMGP_BDR: DTS.Pipeline: The component metadata for "component "DataReader Source" (1113)" could not be upgraded to the newer version of the component. The PerformUpgrade method failed.

Error 2 Error loading BMAG Download Xref Tables - bmag.dtsx: Microsoft.SqlServer.Dts.Pipeline.ComponentVersionMismatchException: The version of component "DataReader Source" (1113) is not compatible with this version of the DataFlow. [[The version or pipeline version or both for the specified component is higher than the current version. This package was probably created on a new version of DTS or the component than is installed on the current PC.]] at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostCheckAndPerformUpgrade(IDTSManagedComponentWrapper90 wrapper, Int32 lPipelineVersion)

Error 3 Error loading BMAG Download Xref Tables - bmag.dtsx: The component metadata for "component "DataReader Source" (1113)" could not be upgraded to the newer version of the component. The PerformUpgrade method failed.


Please advice.
Thank you.





View 7 Replies View Related

The Component Metadata For Component DataReader Source Could Not Be Upgraded To The Newer Version Of The Component.

Jan 23, 2007

Hi,

I have a package which reads an Access file from a folder. My connection manager to this file is .NET providers for OledbMicrosoft Jet 4.0 OLE DB Provider.

Package works from my computer. But when I execute it on the server as a SQL Agent job, I get







The component metadata for "component "DataReader Source" (1) could not be upgraded to the newer version of the component. The PerformUpgrade method failed.  

I copied the mdb file to a folder on the server which my packages have no problem reading data from.

My packages run under the same domain account as defined in proxies.

Appreciate a help.

Gulden

 

 

View 4 Replies View Related

Excel Destination Data Flow Component Shows No Sheet Name Or Output Column Names For Mappings

Mar 8, 2008



I have a data flow that consists of

OLE DB source which calls a stored proc that returns a result set

data conversion

Excel destination
I am in design mode in Business Intelligence studio. My excel destination (with an Excel Connection) shows no sheet name though I have an execute SQL task before the data flow to create the excel table called SHEET1. Needless to say, there are no output columns visible to do any mappings. I did go to the ExcelConnection to set the OpenRowset Property to SHEET1 but it seems to have no effect.

I can do the export in SQL Server Management studio and that works fine, but it is basic and does not meet my requirements. I have to customize the package to allow dynamic Excel filenames based on account names and have to split my result set into multiple excel sheets because excel 2003 has a max of 65536 rows per sheet. Also when I use the export wizard, I have the source as a table and eventually the source has to be a stored proc with input parms.

What am I missing or doing wrong? Thanks in advance

View 6 Replies View Related

Use Of A SSIS Variable Of Type “Object� Inside Script Component And Task Component

Mar 16, 2007

In a Data Flow, I have the necessity to use a SSIS variable of type €œObject€? inside Script Component and assign to it the content of 'n' variables of string type.
On exiting from the script the variable of type object should contain something like in the following lines:
AAAAAAAAAAAAAAAAAAAAAAAAAAAAA
BBBBBBBBBBBBBBBBBBBBBBBBBBBBB
CCCCCCCCCCCCCCCCCCCCCCCCCCCCC
DDDDDDDDDDDDDDDDDDDDDDDDDDDDD
€¦€¦€¦€¦€¦€¦€¦.
€¦€¦€¦€¦€¦€¦€¦.
On exiting from the data flow I will use the variable of type Object in a Script Task, by reading each element in a cyclic fashion.
Is there anyone who have experienced something like this? Could anyone provide any example of that?
Thanks in advance!

View 3 Replies View Related

A Custom Component For Use As A VIEW In SSIS- Is It Possible To Create One MERGE Like Component With More Than 2 Inputs

Aug 13, 2007

Hi all
I'm into a project which uses a lot of views for joining 2 or more tables. Using the MERGE component in SSIS will be a huge effort coz it only has 2 inputs and I gotta SORT the input too.
Isnt it possible to have a VIEW like component that joins more than 2 tables and DOESNT need sorting??
(I've thought about creating views in database engine but it breaks my data floe in SSIS and is'nt a practical solution)

View 4 Replies View Related

Reference To Preceeding Component From Custom Dataflow Transformation Component

Mar 30, 2006

I am writing a custom dataflow transformation component and I need to get the name of the preceeding component.

I have been trying to find a way to get a reference to the Package object, MainPipe object or IDTSPath90 object (connecting to the IDTSInput90 of my component) from my component because I think from there I can get to the information I want.

Does anyone have any suggestions?

TIA . . . Ed

View 7 Replies View Related

Serious Script Component Bug - Clears Out All Code Inside Component

Nov 27, 2007



No idea where this bug crept in from. Have been using SSIS for 1.5 years now without hitting this problem.

I had a script component opening an XML document and parsing it using XPATH. I added some code that uses StreamReader / Streamwriter (closing one stream before starting the other). The code works without issue in my C# app.

And it ran without issue 2-3 times in SSIS. Then suddenly after running my package again, the script component says it completes successfully, yet nothing happens. I set a breakpoint on the first line of code - it never hits it. I add a msgbox as the first line of code - and it never displays.

I then close my package / exit out of ssis ... and then re-open it. When i open my script component, all of my code is GONE. All references that I added are gone.

I tried adding the streamreader/writer process to a dll I created from my c# app ... and added the DLL to the package -- same result.

I can reproduce this on 2 different computers.

Anyone experience this problem ? Any idea how to stop it ? Or debug it ?


Here is a slimmed down code sample of what causes the error :


Public Class ScriptMain
Public Sub Main()
Try
Dim xmlDoc As New XmlDocument
xmlDoc.Load("c:ulkasync_86281519_20070628045850225_4.xml")
MsgBox("xmlLoaded") --this doesn't display once the package starts "acting up"
Catch ex As Exception
MsgBox(ex.Message)
UpdateXML("c:ulkasync_86281519_20070628045850225_4.xml", ex.Message)
End Try
Dts.TaskResult = Dts.Results.Success
End Sub
Private Sub UpdateXML(ByVal fileName As String, ByVal message As String)
Try
Dim invalidChar As String = message.Trim().Substring(message.Trim().IndexOf("0x"), 4)
Dim rd As StreamReader = New StreamReader(fileName)
Dim xml As String = rd.ReadToEnd()
Xml = Xml.Replace(invalidChar, String.Empty)
xml = xml.Replace("", String.Empty)
xml = xml.Replace("<![CDATA[<![CDATA[", "<![CDATA[")
xml = xml.Replace("]]>]]>", "]]>")
MsgBox("replaced")
rd.Close()
Dim wr As StreamWriter = New StreamWriter(fileName)
wr.Write(xml)
wr.Close()
Dim xdoc As XmlDocument = New XmlDocument()
xdoc.Load(fileName)
Catch ex As Exception
UpdateXML(fileName, ex.Message)
End Try
End Sub
End Class

View 4 Replies View Related

Number Of ROWS Of Output Of Aggregate Transformation Sometimes Doesn't Match The Output From T-SQL Query

Dec 25, 2006

While using Aggregate Transformation to group one column,the rows of output sometimes larger than the rows returned by a T-SQL statement via SSMS.

For example,the output of the Aggregate Transformation may be 960216 ,but the

'Select Count(Orderid) From ... Group By ***' T-SQL Statement returns 96018*.

I'm sure the Group By of the Aggregate Transformation is right!



But ,when I set the "keyscale" property of the transformation,the results match!

In my opinion,the "keyscale" property will jsut affects the performance of the transformaiton,but not the result of the transformation.

Thanks for your advice.

View 2 Replies View Related

Transact SQL :: Generic Store Procedure Call Without Output Parameters But Catching Output

Sep 21, 2015

Inside some TSQL programmable object (a SP/or a query in Management Studio)I have a parameter containing the name of a StoreProcedure+The required Argument for these SP. (for example it's between the brackets [])

EX1 : @SPToCall : [sp_ChooseTypeOfResult 'Water type']
EX2 : @SPToCall : [sp_ChooseTypeOfXMLResult 'TABLE type', 'NODE XML']
EX3 : @SPToCall : [sp_GetSomeResult]

I can't change thoses SP, (and i don't have a nice output param to cach, as i would need to change the SP Definition)All these SP 'return' a 'select' of 1 record the same datatype ie: NVARCHAR. Unfortunately there is no output param (it would have been so easy otherwise. So I am working on something like this but I 'can't find anything working

DECLARE @myFinalVarFilledWithCachedOutput 
NVARCHAR(MAX);
DECLARE @SPToCall NVARCHAR(MAX) = N'sp_ChooseTypeOfXMLResult
''TABLE type'', ''NODE XML'';'
DECLARE @paramsDefintion = N'@CatchedOutput NVARCHAR(MAX) OUTPUT'

[code]...

View 3 Replies View Related

Output And Error Output Write The Same Table At The Same Time, Stall The Process.

Aug 30, 2006

Hi

I have Lookup task to determine if source data should be updated to or insert to the customer table. After Lookup task, the Error Output pipeline will redirect to insert new data to the table and the Output pipeline will update customer table. But these two tasks will be processing at the same time which causes stall on the process. Never end.....

The job is similiart to what Slow Changing Dimention does but it won't update the table at the same time.

What can I do to avoid such situation?

Thanks in advance,

JD

View 4 Replies View Related

Using Output From A Stored Procedure As An Output Column In The OLE DB Command Transformation

Dec 8, 2006

I am working on an OLAP modeled database.

I have a Lookup Transformation that matches the natural key of a dimension member and returns the dimension key for that member (surrogate key pipeline stuff).

I am using an OLE DB Command as the Error flow of the Lookup Transformation to insert an "Inferred Member" (new row) into a dimension table if the Lookup fails.

The OLE DB Command calls a stored procedure (dbo.InsertNewDimensionMember) that inserts the new member and returns the key of the new member (using scope_identity) as an output.

What is the syntax in the SQL Command line of the OLE DB Command Transformation to set the output of the stored procedure as an Output Column?

I know that I can 1) add a second Lookup with "Enable memory restriction" on (no caching) in the Success data flow after the OLE DB Command, 2) find the newly inserted member, and 3) Union both Lookup results together, but this is a large dimension table (several million rows) and searching for the newly inserted dimension member seems excessive, especially since I have the ID I want returned as output from the stored procedure that inserted it.

Thanks in advance for any assistance you can provide.

View 9 Replies View Related

Query Produces Jumbled Output / Output Not In Sequence

Jul 23, 2005

Hi!Server info -Win2K3 Server +SP1 with 1 GB Memory and 1.5 GB Virtual MemorySQL Server 2000 Enterprise Edition + SP3 running on this.Required result -Create a SQL Script that will contain a set of create, update, insert& delete statements (about 17500 lines including blank lines) thatcan be run on different databases seperatelyHow we do this -We have a SP - that creates a temporary table and then calls anotherSP that actually populates the temporary table created by the first SP*Samples of both SPs are below -PROBLEMThe result is directed to a file -However when the query is run it runs through the entire script but'Jumbles' the outputRunning the same scripts on a copy of the database on other machineswork fine and the size of the outfiles is exactly the sameI have increased the page size to 2.5 GB and restarted the server.Running the sp now generated the correct output a few times but gotjumbled as before after a few more users logged in and activity on theserver increased.Another interesting point is that the output is jumbled exactly thesame way each time. It seems the sql executes correctly and writesthe output in chunks only writting the chunks out of sequence - butin the same sequence each time.e.g. of expected resultInsert into Table1Values x, y, z, 1, 2Insert into Table1Values q, s, g, 3, 4Insert into Table1Values c, d, e, 21, 12....Insert into Table2Values ...Insert into Table3Values ................Update RefGenSet Last = 1234Where RefGenRef = 1JUMBLED OUTPUTInsert into Table1Values x, y, z, 1, 2Insert into Table1Values q, s, g, 3, 4Insert into Table1Values c, d, e, 21, 12....Insert into Table2Values ...Insert into Table2Values ...Values ...Update RefGenSet Last = 1234Where RefGenRef = 1Insert into Table3Values ................Insert into Table1Values c, d, e, 21, 12....Insert into Table2----------------------------------------Sample of First Script - STATDATA_RSLT**************************************SET QUOTED_IDENTIFIER ONGOSET ANSI_NULLS ONGOSET NOCOUNT ONGOCREATE PROCEDURE StatData_rsltASCREATE TABLE #tbl_Script(ScriptText varchar(4000))EXEC TestStatData_intSELECT t.ScriptTextFROM #tbl_Script tGOSET QUOTED_IDENTIFIER OFFGOSET ANSI_NULLS ONGO*******************************************Sample of CALLED SP - TestStatData_int*******************************************SET QUOTED_IDENTIFIER ONGOSET ANSI_NULLS ONGOCREATE PROCEDURE TestStatData_intASDECLARE @AttrRef int,@TestID int,@PrtTestRef int,@AttrType tinyint,@EdtblSw tinyint,@NmValRef int,@SrtTypeRef int,@AttrStr varchar(20),@TestStr varchar(20),@PrtTestStr varchar(20),@AttrTypeStr varchar(20),@EdtblStr varchar(20),@NmValStr varchar(20),@SrtTypeStr varchar(20),@TestRef int,@Seq int,@PrtRef int,@Value varchar(255),@TermDate datetime,@AttrID int,@DefSw tinyint,@WantSw tinyint,@TestRefStr varchar(20),@SeqStr varchar(20),@PrtStr varchar(20),@TermDateStr varchar(255),@AttrIDStr varchar(20),@DefStr varchar(20),@WantStr varchar(20),@LanRef int,@LanStr varchar(20),@Code varchar(20),@Desc varchar(255),@MultiCode varchar(20),@MultiDesc varchar(255),@InhSw tinyint,@InhStr varchar(20),@InhFrom int,@InhFromStr varchar(20),@Lan_TestRef int,@ActSw tinyint,@ActSwStr varchar(20)SELECT @Lan_TestRef = dbo.fn_GetTestRef('Lan')INSERT INTO #tbl_ScriptVALUES('')-- Create tablesINSERT INTO #tbl_ScriptVALUES ('CREATE TABLE #tbl_Test (AttrRef int, TestID int , PrtTestRefint, AttrType tinyint, EdtblSw tinyint, NmValRef int, SrtTypeRefint)')INSERT INTO #tbl_ScriptVALUES ('')INSERT INTO #tbl_ScriptVALUES('CREATE TABLE #tbl_TestAttr(AttrRef int, TestRef int, Seq int,PrtRef int, AttrType tinyint, Value varchar(255), TermDate datetime,AttrID int, DefSw tinyint, WantSw tinyint, ActSw tinyint)')INSERT INTO #tbl_ScriptVALUES ('')INSERT INTO #tbl_ScriptVALUES ('CREATE TABLE #tbl_AttrName(AttrRef int, LanRef int, Codevarchar(20), [Desc] varchar(255), MultiCode varchar(20), MultiDescvarchar(255), InhSw tinyint, InhFrom int)')INSERT INTO #tbl_ScriptVALUES ('')-- insert Test valuesDECLARE Test_cursor CURSOR FORSELECT l.AttrRef, l.TestID, l.PrtTestRef, l.AttrType, l.EdtblSw,l.NmValRef, l.SrtTypeRefFROM Test lOPEN Test_cursorFETCH NEXT FROM Test_cursorINTO @AttrRef, @TestID, @PrtTestRef, @AttrType, @EdtblSw, @NmValRef,@SrtTypeRefWHILE @@FETCH_STATUS = 0BEGINSELECT @AttrStr = ISNULL(CAST(@AttrRef as varchar), 'NULL'),@TestStr = ISNULL(CAST(@TestID as varchar), 'NULL'),@PrtTestStr = ISNULL(CAST(@PrtTestRef as varchar), 'NULL'),@AttrTypeStr = ISNULL(CAST(@AttrType as varchar), 'NULL'),@EdtblStr = ISNULL(CAST(@EdtblSw as varchar), 'NULL'),@NmValStr = ISNULL(CAST(@NmValRef as varchar), 'NULL'),@SrtTypeStr = ISNULL(CAST(@SrtTypeRef as varchar), 'NULL')INSERT INTO #tbl_ScriptVALUES ('INSERT INTO #tbl_Test(AttrRef, TestID, PrtTestRef,AttrType,EdtblSw, NmValRef, SrtTypeRef)')INSERT INTO #tbl_ScriptVALUES ('VALUES ( ' + @AttrStr + ', ' + @TestStr + ', ' +@PrtTestStr+ ', ' + @AttrTypeStr + ', ' + @EdtblStr + ', ' + @NmValStr + ', ' +@SrtTypeStr + ')')INSERT INTO #tbl_ScriptVALUES ('')FETCH NEXT FROM Test_cursorINTO @AttrRef, @TestID, @PrtTestRef, @AttrType, @EdtblSw, @NmValRef,@SrtTypeRefENDCLOSE Test_cursorDEALLOCATE Test_cursorDECLARE TestAttr_cursor CURSOR FORSELECT le.AttrRef, le.TestRef, le.Seq, le.PrtRef, le.AttrType,le.Value,le.TermDate, le.AttrID, le.DefSw, le.WantSw, le.ActSwFROM TestAttr leWHERE le.WantSw = 1AND le.ActSw = 1OPEN TestAttr_cursorFETCH NEXT FROM TestAttr_cursorINTO @AttrRef, @TestRef, @Seq, @PrtRef, @AttrType, @Value,@TermDate, @AttrID, @DefSw, @WantSw, @ActSwWHILE @@FETCH_STATUS = 0BEGINSELECT @AttrStr = ISNULL(CAST(@AttrRef as varchar), 'NULL'),@TestRefStr = ISNULL(CAST(@TestRef as varchar), 'NULL'),@SeqStr = ISNULL(CAST(@Seq as varchar), 'NULL'),@PrtStr = ISNULL(CAST(@PrtRef as varchar), 'NULL'),@AttrTypeStr = ISNULL(CAST(@AttrType as varchar), 'NULL'),@Value = ISNULL(@Value, 'NULL'),@TermDateStr = ISNULL(CAST(@TermDate as varchar), 'NULL'),@AttrIDStr = ISNULL(CAST(@AttrID as varchar), 'NULL'),@DefStr = ISNULL(CAST(@DefSw as varchar), 'NULL'),@WantStr = ISNULL(CAST(@WantSw as varchar), 'NULL'),@ActSwStr = ISNULL(CAST(@ActSw as varchar), '1')SELECT @Value = '''' + @Value + ''''WHERE @Value <> 'NULL'INSERT INTO #tbl_ScriptVALUES ('INSERT INTO #tbl_TestAttr(AttrRef, TestRef, Seq, PrtRef,AttrType, Value, TermDate, AttrID, DefSw, WantSw, ActSw)')INSERT INTO #tbl_ScriptVALUES ('VALUES (' + @AttrStr + ', ' + @TestRefStr + ', ' +@SeqStr+ ', ' + @PrtStr + ', ' + @AttrTypeStr + ', ' + @Value + ', ' +@TermDateStr + ', ' + @AttrIDStr + ', ' + @DefStr + ', ' + @WantStr+', '+ @ActSwStr + ')')INSERT INTO #tbl_ScriptVALUES ('')FETCH NEXT FROM TestAttr_cursorINTO @AttrRef, @TestRef, @Seq, @PrtRef, @AttrType, @Value,@TermDate, @AttrID, @DefSw, @WantSw, @ActSwENDCLOSE TestAttr_cursorDEALLOCATE TestAttr_cursorDECLARE AttrName_cursor CURSOR FORSELECT e.AttrRef, e.LanRef, e.Code, e.[Desc], e.MultiCode,e.MultiDesc, e.InhSw, e.InhFromFROM AttrName e, TestAttr leWHERE e.LanRef = 0AND e.AttrRef = le.AttrRefAND le.WantSw = 1AND le.ActSw = 1OPEN AttrName_cursorFETCH NEXT FROM AttrName_cursorINTO @AttrRef, @LanRef, @Code, @Desc, @MultiCode,@MultiDesc, @InhSw, @InhFromWHILE @@FETCH_STATUS = 0BEGINSELECT @AttrStr = ISNULL(CAST(@AttrRef as varchar), 'NULL'),@LanStr = ISNULL(CAST(@LanRef as varchar), 'NULL'),@Code = ISNULL(@Code, 'NULL'),@Desc = ISNULL(@Desc, 'NULL'),@MultiCode = ISNULL(@MultiCode, 'NULL'),@MultiDesc = ISNULL(@MultiDesc, 'NULL'),@InhStr = ISNULL(CAST(@InhSw as varchar), 'NULL'),@InhFromStr = ISNULL(CAST(@InhFrom as varchar), 'NULL')SELECT @Code = REPLACE(@Code, '''',''''''),@Desc = REPLACE(@Desc, '''','''''') ,@MultiCode = REPLACE(@MultiCode, '''','''''') ,@MultiDesc = REPLACE(@MultiDesc, '''','''''')INSERT INTO #tbl_ScriptVALUES ('INSERT INTO #tbl_AttrName(AttrRef, LanRef, Code, [Desc],MultiCode, MultiDesc, InhSw, InhFrom)')INSERT INTO #tbl_ScriptVALUES ('VALUES (' + @AttrStr + ', ' + @LanStr + ', ''' + @Code +''', ''' + @Desc + ''', ''' + @MultiCode + ''', ''' + @MultiDesc +''',' + @InhStr + ', ' + @InhFromStr + ')')INSERT INTO #tbl_ScriptVALUES ('')FETCH NEXT FROM AttrName_cursorINTO @AttrRef, @LanRef, @Code, @Desc, @MultiCode,@MultiDesc, @InhSw, @InhFromENDCLOSE AttrName_cursorDEALLOCATE AttrName_cursor-- Do update TestAttr dataINSERT INTO #tbl_ScriptVALUES ('UPDATE le')INSERT INTO #tbl_ScriptVALUES ('SET')INSERT INTO #tbl_ScriptVALUES (' le.TestRef = t.TestRef,')INSERT INTO #tbl_ScriptVALUES (' le.PrtRef = t.PrtRef,')INSERT INTO #tbl_ScriptVALUES (' le.AttrType = t.AttrType,')INSERT INTO #tbl_ScriptVALUES (' le.Value = t.Value,')INSERT INTO #tbl_ScriptVALUES (' le.TermDate = t.TermDate,')INSERT INTO #tbl_ScriptVALUES (' le.AttrID = t.AttrID,')INSERT INTO #tbl_ScriptVALUES (' le.DefSw = t.DefSw,')INSERT INTO #tbl_ScriptVALUES (' le.WantSw = t.WantSw,')INSERT INTO #tbl_ScriptVALUES (' le.ActSw = t.ActSw')INSERT INTO #tbl_ScriptVALUES ('FROM TestAttr le, #tbl_TestAttr t')INSERT INTO #tbl_ScriptVALUES ('WHERE le.AttrRef = t.AttrRef')INSERT INTO #tbl_ScriptVALUES ('')-- Update AttrNameINSERT INTO #tbl_ScriptVALUES ('UPDATE en')INSERT INTO #tbl_ScriptVALUES ('SET')INSERT INTO #tbl_ScriptVALUES (' en.Code = te.Code,')INSERT INTO #tbl_ScriptVALUES (' en.[Desc] = te.[Desc],')INSERT INTO #tbl_ScriptVALUES (' en.MultiCode = te.MultiCode,')INSERT INTO #tbl_ScriptVALUES (' en.MultiDesc = te.MultiDesc,')INSERT INTO #tbl_ScriptVALUES (' en.InhSw = te.InhSw,')INSERT INTO #tbl_ScriptVALUES (' en.InhFrom = te.InhFrom')INSERT INTO #tbl_ScriptVALUES ('FROM AttrName en, #tbl_AttrName te')INSERT INTO #tbl_ScriptVALUES ('WHERE en.AttrRef = te.AttrRef')INSERT INTO #tbl_ScriptVALUES (' AND en.LanRef = te.LanRef')INSERT INTO #tbl_ScriptVALUES (' AND te.LanRef = 0')-- Do update Test the dataINSERT INTO #tbl_ScriptVALUES ('UPDATE l')INSERT INTO #tbl_ScriptVALUES ('SET')INSERT INTO #tbl_ScriptVALUES (' l.TestID = t.TestID,')INSERT INTO #tbl_ScriptVALUES (' l.PrtTestRef = t.PrtTestRef,')INSERT INTO #tbl_ScriptVALUES (' l.AttrType = t.AttrType,')INSERT INTO #tbl_ScriptVALUES (' l.EdtblSw = t.EdtblSw,')INSERT INTO #tbl_ScriptVALUES (' l.NmValRef = t.NmValRef')INSERT INTO #tbl_ScriptVALUES ('FROM Test l, #tbl_Test t')INSERT INTO #tbl_ScriptVALUES ('WHERE l.AttrRef = t.AttrRef')INSERT INTO #tbl_ScriptVALUES ('')--DELETE where just updatedINSERT INTO #tbl_ScriptVALUES ('DELETE FROM t')INSERT INTO #tbl_ScriptVALUES ('FROM #tbl_Test t, Test l')INSERT INTO #tbl_ScriptVALUES ('WHERE t.AttrRef = l.AttrRef')INSERT INTO #tbl_ScriptVALUES ('')INSERT INTO #tbl_ScriptVALUES ('DELETE FROM t')INSERT INTO #tbl_ScriptVALUES ('FROM #tbl_TestAttr t, TestAttr le')INSERT INTO #tbl_ScriptVALUES ('WHERE t.AttrRef = le.AttrRef')INSERT INTO #tbl_ScriptVALUES ('')INSERT INTO #tbl_ScriptVALUES ('DELETE FROM te')INSERT INTO #tbl_ScriptVALUES ('FROM #tbl_AttrName te, TestAttr le')INSERT INTO #tbl_ScriptVALUES ('WHERE te.AttrRef = le.AttrRef')INSERT INTO #tbl_ScriptVALUES ('')-- Insert TestAttrINSERT INTO #tbl_ScriptVALUES ('INSERT INTO TestAttr (AttrRef, TestRef, Seq, PrtRef,AttrType,Value, TermDate, AttrID, DefSw, WantSw, ActSw)')INSERT INTO #tbl_ScriptVALUES ('SELECT t.AttrRef, t.TestRef, t.Seq, t.PrtRef, t.AttrType,t.Value, t.TermDate, t.AttrID, t.DefSw, t.WantSw, t.ActSw')INSERT INTO #tbl_ScriptVALUES ('FROM #tbl_TestAttr t')INSERT INTO #tbl_ScriptVALUES ('')-- AttrNameINSERT INTO #tbl_ScriptVALUES ('INSERT INTO AttrName(AttrRef, LanRef, Code, [Desc],MultiCode,MultiDesc, InhSw, InhFrom)')INSERT INTO #tbl_ScriptVALUES ('SELECT te.AttrRef, le.AttrRef, te.Code, te.[Desc],te.MultiCode, te.MultiDesc, ')INSERT INTO #tbl_ScriptVALUES (' CASE le.AttrRef ')INSERT INTO #tbl_ScriptVALUES (' WHEN 0 THEN 0')INSERT INTO #tbl_ScriptVALUES (' ELSE 1 END,')INSERT INTO #tbl_ScriptVALUES (' CASE le.AttrRef ')INSERT INTO #tbl_ScriptVALUES (' WHEN 0 THEN NULL')INSERT INTO #tbl_ScriptVALUES (' ELSE 0 END')INSERT INTO #tbl_ScriptVALUES ('FROM #tbl_AttrName te, TestAttr le')INSERT INTO #tbl_ScriptVALUES ('WHERE le.TestRef = ' + CAST(@Lan_TestRef as varchar))INSERT INTO #tbl_ScriptVALUES ('')-- Insert new rowsINSERT INTO #tbl_ScriptVALUES ('INSERT INTO Test(AttrRef, TestID, PrtTestRef, AttrType,EdtblSw, NmValRef, SrtTypeRef)')INSERT INTO #tbl_ScriptVALUES ('SELECT t.AttrRef, t.TestID, t.PrtTestRef, t.AttrType,t.EdtblSw, t.NmValRef, t.SrtTypeRef')INSERT INTO #tbl_ScriptVALUES ('FROM #tbl_Test t')INSERT INTO #tbl_ScriptVALUES ('')INSERT INTO #tbl_ScriptVALUES ('DROP TABLE #tbl_Test')INSERT INTO #tbl_ScriptVALUES ('DROP TABLE #tbl_TestAttr')INSERT INTO #tbl_ScriptVALUES ('DROP TABLE #tbl_AttrName')-- Update RefGenDECLARE @RefGenReflast int,@RefGenRefStr varchar(10)SELECT @RefGenReflast = lastFROM RefGenWHERE RefGenRef = 1SELECT @RefGenRefStr = ISNULL(CAST(@RefGenReflast as varchar), 'NULL')INSERT INTO #tbl_ScriptVALUES('')INSERT INTO #tbl_ScriptVALUES('UPDATE RefGen')INSERT INTO #tbl_ScriptVALUES ('SET Last = ' + @RefGenRefStr)INSERT INTO #tbl_ScriptVALUES ('WHERE RefGenRef = 1')INSERT INTO #tbl_ScriptVALUES ('')GOSET QUOTED_IDENTIFIER OFFGOSET ANSI_NULLS ONGO*******************************RegardsGlenn

View 5 Replies View Related

PrimeOutput : Difference Between 'Output' And 'output Buffer'

Aug 12, 2005

When overriding the PrimeOutput method in a custom component, you get as parameters the outputIDs and the output buffers (of type PipelineBuffer). using the outputIDs you can get IDTSOutput90 outputs.

View 5 Replies View Related

Enable Error Handling When Writing Custom Source Component /custom Error Handling Component.

Apr 21, 2006

1) We are writing a custome Source component for Oracle with OCI calls, Could some one please let me know how to Enable Error Handling for the Same,

2) Is it possible to write Custome Error Handeling Component for SSIS? if yes could you please help me on how to write it.

Thanks in advance.

View 1 Replies View Related

How To Get The Name Of The Component

Nov 26, 2007

How can we get the name of the component inside the Data Flow Task . What I want is to log error stating which component in the data flow task has failed. Package and Data Flow names I am getting from system variables. I want to log like the Execution Result screen with Name of the component and [its id].
Like "Derived Column[216]" has failed with some error
It is possible?

View 8 Replies View Related

Looking For A Component

Nov 8, 2007

I'd like to incorporate the "package component tree" UI component that is used within the Visual Studio designers into an SSIS utility I'm building. This is the one I'm talking about:

Edit: Apparently using the IMG tag on these forums works in the editor preview, but not in the actual posts, so I've replaced images with links...

Example 1
Example 2


I've done some searching online, but have not found any information about where this UI is implemented, or if it is reusable. Does anyone here know if it is possible to re-use this component in a .NET application?

Thanks in advance!

View 5 Replies View Related

What Component Do I Need To Use MSDataShape?

Apr 15, 2004

Hi, all.
I create a report using VB datareport.
but, when I call following statement.. it cause Error "Class not registered!"

cnn.Open "Provider=MSDataShape.1;Persist Security Info=False;User ID=" & gstrID & ";Password= " & gstrPassword & ";Initial Catalog=TimeClock;Data Provider=SQLOLEDB.1" & _
"Data Source=" & gstrLocalDBServer & ";server=" & gstrLocalDBServer

How can I solve this problem?

View 1 Replies View Related

Installation Of Component

Nov 16, 2007

Ok. I have 2005 standard with sp2 installed. Went to create a maintenance plan and low and behold the component is missing. Ok.. no big deal, i'll just add it. Of course you know this is the error I get.

To change an existing instance of Microsoft SQL Server 2005 to a different edition of SQL Server 2005, you must run SQL Server 2005 Setup from the command prompt and include the SKUUPGRADE=1 parameter.

Ok.. doesn't seem too bad. So I go to a dos prompt. d: oolssetup.exe skuupgrade=1

Same error.

Help please :)

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved