Script Task - Set Variable Value Based On Success Or Failure
Feb 14, 2008
Please excuse my ignorance as I'm a complete noob when it comes to vb.net.
I have 2 script tasks, each connected to an upstream task via Success and Failure constraints. Each script assigns a value to a variable, depending on whether the task succeeds or fails.
My code thus far is:
Code Snippet
Public Sub Main()
Dts.Variables("strEmailBody").Value = _
"Business Model Reporintg Control Complete - Status = Success"
Dts.TaskResult = Dts.Results.Success
End Sub
What i want to do is use a single script task depending on the success or failure of the package, setting the variable value accordingly.
If there are no errors Then
"Success"
Else
"Failure"
I've tried
Code SnippetIF CBool(Dts.Results.Success) Then...
But whislt it compiled, didn't evaluate correctly during runtime.
Can anyone suggest where I'm going wrong? Again I'm totally new to .net and I'm surprised I've gotten this far!
Thanks in advance.
Leigh
View 5 Replies
ADVERTISEMENT
Sep 12, 2006
Hello,
When I run my package, a task will fail, however, the package will claim that it was successful. Why is this, and how can I trigger a failed package when one task fails?
Thanks in advance.
View 4 Replies
View Related
Mar 11, 2008
I have an SSIS package that executes a stored procedure. In that stored procedure is a try/catch block. If the try isn't successful, it goes to the catch block which does a rollback. So when I execute the SSIS package, it tells me that the stored procedure was ran successfully because there essentianlly were no errors and everything ran fine, but in reality, everytime it goes into the catch block and does a rollback, I want the SSIS package to fail as well. How would I send back a failure to the SSIS package from the stored procedure?
View 13 Replies
View Related
Jul 17, 2006
This doesn't seem possible but I'll ask anyway...
Can I build a lookup task where the lookup query is based on a variable, rather than hardcoding the SQL staement?
View 3 Replies
View Related
Jun 29, 2006
Hi all,
I have a stored proc that uses xp_cmdshell to boot off a batch file on the NT side of the box (box OS is Windows 2000 Advanced Server).
Here is the pertinent code:/*----- Kick off the NT bat job to suck over the data through the web service pipe*/
SELECT @NTCommand = 'D:TradeAnalysisWondaDataStoreJobsPullFromWONDA _InstitutionalRankings.bat ' + CONVERT(varchar(10), @ReqDate, 101)
EXECUTE @e_error = master.dbo.xp_cmdshell @NTCommand
SELECT @m_error = CASE WHEN ISNULL(@e_error, 0) <> 0 THEN (@e_error + 50000) ELSE @@Error END
IF @m_error <> 0 GOTO ErrorHandlerThe trouble is that the batch file is failing (soft error, caught internally to the batch file, which then kills itself, screaming loudly all the way).
The batch file is using the following "voice" in which to scream in pain as it dies (a.k.a., using this code to terminate itself, which kills the cmd shell and returns 13 as an error code)REM WonDBService.exe says we failed
Date /T
Time /T
EXIT /B 13
Meanwhile, back at the ranch (errr...back in stored procedure), what is being returned is a ZERO (in the first code block, @e_error is being set to ZERO when the xp_cmdshell returns from the bat file.
So, now that I have ruled out the obvious *LOL* how can I get my xp_cmdshell to realize it has failed miserably at the one, tiny, simple, not-too-much-to-ask, job that it is designed to do?
View 2 Replies
View Related
Mar 18, 2008
I have a number of stored procedures that run one after the other. How do you code to get the success or failure so that some logic can be applied accordingly? I've heard of the TRY CATCH structure, but I new and have yet to use it. How many different ways can success or failure be handled in code?
View 4 Replies
View Related
Jun 1, 2015
When I execute Parent SP, it should Return 1 when Child SP is executed Successfully and Zero when Child SP fail .below are sample SP
CREATE PROCEDURE EXEC_CHILD_PROC
AS
BEGIN
SELECT 99/0
END
[code]...
I tried several way , but did not get correct syntax to modify Parent SP give 1 or 0 on child SP execution
View 6 Replies
View Related
Feb 23, 2008
ummm. sorry, I've read and seen the tutorials but somehow and missing this.
I have a foreach container. Inside a dataflow task, with an XML source, a data conversion (cause of urrr UNICODE) and and an ole DB data source.
By design (and for this simple example), I get a volation if I attempt to load loads with out deleting entries from my table. No biggie, I would just like this simple package to rename my file to extension .good or .bad depending on success of each loop.
Where and what do I need for this?
Thank you for any help or information!
View 3 Replies
View Related
May 2, 2007
More of a general SOAP service call question.
Does anybody have any experience/advice on how to ensure that SOAP service call success/failures are returned to the calling app?
Consider a client that calls a SOAP service during which the client goes down and is unable to receive the SOAP response, the work having been done by the service. Similarly, the SOAP service may perform the task but a failure in the return makes the client think the process failed.
What would be the best way to ensure that the client is notified to avoid the call having to be made again?
Are there middleware tools that can be used to provide a form of message queuing for SOAP service calls?
Thanks
View 1 Replies
View Related
Feb 19, 2015
I have a SSIS pkg that gets data from SQL and do data conversion and Insert into OLE db AS400 destination, There is a flag column in SQL table , that has to be updated to true, once the records are inserted in AS400 how do i do that in SSIS
SQL oledb ---------> dataConversion ---------------> AS400 OLE db Destination
|
update SQL table Flag column<---------------------------------|
View 9 Replies
View Related
Jun 10, 2015
I have configured smtp email in MS sql server and configure email to schedular job when schedular jobs become failed. Can i configure email so that email will be sent from scheduler job on both success of job and Failure of job?
View 3 Replies
View Related
Sep 4, 2007
Hi,
We are using SSIS to load some 100k records from flat file to Oracle Destination. We are using Oracle 10g client.
But during the execution after some 5hrs or 6hr with 900k records upload we are getting the message Package execution completed. In the Execution results there is no message related to success or failure and the tasks in the Data Flow where yellow in color. What might be the problem? Any information regarding this case will be helpful for us.
Regards,
Roopa.
View 3 Replies
View Related
Nov 8, 2006
Hi
I've created a simple package that contains only one task that is an execute sql task. When I run only this single task from Business Intelligence development studio it runs successfully. But when I run the whole package (also from Business intlligence studio), the package fails.
The data source I access is ODBC. I'm sure the real reason for the error is the bad ODBC driver of the data source but this can't be changed. So I need to know what is different from running only a task in a package to running the whole package. If I knew that I might be able to adjust some setting and make it work.
Any help welcome.
View 4 Replies
View Related
Mar 26, 2008
I'm debugging a SSIS package in Visual Studio and I have a task that failes but the overall package is reporting success. The deployed package in SQL2005 is doing the same thing.
Task failed: FactVisitApplicationInventory
SSIS package "PACE to PACE DW PROD.dtsx" finished: Success.
The program '[4652] PACE to PACE DW PROD.dtsx: DTS' has exited with code 0 (0x0).
I have set FailPackageOnFailure=True, FailParentOnFailure=True, and MaximumErrorCount=0 on this task and am executing just this single task in Studio and I can't get the Package to report a failure.
Any ideas?
View 3 Replies
View Related
Mar 6, 2008
I have a SSIS job, one of the last steps it performs is to execute a SQL 2000 DTS package. This has to be done as a SQL 2000 DTS package as it is performing rebuilds of SQL 2000 Analysis Services dimensions and cubes. We've found that when the DTS fails the SSIS job is happily completing showing as a success, we would prefer to know it went wrong.
As far as I'm aware SSIS merely starts the DTS off and doesn't care about it's result. I've taken a look in to turning on the logging for the execute DTS package and thought that the ExecuteDTS80PackageTaskTaskResult would give me the answer I need...but is merely written to the log not available as an event-handler. It also looks like it is not safe to put a SQL task in as the next item to go look at the SQL 2000 system tables to look at the log for the DTS package as the SSIS documentation warns that the DTS package can continue to run after the execute DTS package task has ended.
Ideally I want any error raised within the DTS package to cascade up to be an error in the SSIS job, I can then handle it appropriately. I cannot find a way to do this. Is there a way?
If not, can anyone suggest how in the remainder of the SSIS tasks I can be sure that the DTS has completed before I start any other tasks that will check for the SQL 2000 log of its execution?
View 5 Replies
View Related
Jun 17, 2015
Exec Prcoess task with source : ftp
destination :ftpunzip
work directory ftpunzip
executable : c:Program FilesWinZip
i am using expressing.
It is doing the unzip but getting this error
package process on server server1 has failed within the Task 'Unzip Files' with the following errors:
>
> File/Process "WZUNZIP.EXE" does not exist in directory "c:Program FilesWinZip".
This is the error message i am getting it
View 6 Replies
View Related
Nov 30, 2006
when I run a package from a command window using dtexec, the job immediately says success.
DTExec: The package execution returned DTSER_SUCCESS (0).
Started: 3:37:41 PM
Finished: 3:37:43 PM
Elapsed: 2.719 seconds
However the Job is still in th agent and the status is executing. The implications of this are not good. Is this how the sql server agent job task is supposed to work by design.
Thanks,
Larry
View 1 Replies
View Related
Oct 25, 2006
I'm working on an SSIS package that uses a vb.net script to grab some XML from a webservice (I'd explain why I'm not using a web service task here, but I'd just get angry), and I wish to then assign the XML string to a package variable which then gets sent along to a DataFlow Task that contains an XML Source that points at said variable. when I copy the XML string into the variable value in the script, if do a quickwatch on the variable (as in Dts.Variable("MyXML").value) it looks as though the new value has been copied to the variable, but when I step out of that task and look at the package explorer the variable is its original value.
I think the problem is that the dataflow XML source has a lock on the variable and so the script task isn't affecting it. Does anyone have any experience with this kind of problem, or know a workaround?
View 1 Replies
View Related
Mar 6, 2008
I have a SQL Task that updates running totals on a record inserted using a Data Flow Task. The package runs without error, but the actual row does not calculate the running totals. I suspect that the inserted record is not committed until the package completes and the SQL Task is seeing the previous record as the current. Here is the code in the SQL Task:
DECLARE @DV INT;
SET @DV = (SELECT MAX(DateValue) FROM tblTG);
DECLARE @PV INT;
SET @PV = @DV - 1;
I've not been successful in passing a SSIS global variable to a declared parameter, but is it possible to do this:
DECLARE @DV INT;
SET @DV = ?;
DECLARE @PV INT;
SET @PV = @DV - 1;
I have almost 50 references to these parameters in the query so a substitution would be helpful.
Dan
View 4 Replies
View Related
Sep 5, 2000
Hi,
I want to know if it's possible to retrieve what kind of error have occurred when the on Failure workflow is execute in a DTS package.
Martin
View 1 Replies
View Related
Oct 18, 2005
We are unable to get a file from a VMS FTP site. The specific error message is:
View 5 Replies
View Related
Mar 12, 2001
I am having a problem with the scheduled task I am running. There had been an error message 5702 which says "The SQL Server is terminating this process". I don't understand what this means. And if I try to force the job to run, it says that the SQLExecutive service is not running on the particular server. And this prevents the task from being run. But when I try to check for the said service, it is running. I don't know what is happening here. Please help me.
View 1 Replies
View Related
Oct 15, 2007
Hi all,
I have set up a package that copies data from one server to another server, then delete the data from the source tables. Now I want to add a task where it asks if the copying data was successful, then delete the data, ELSE stop the package and give an error msg, or some kind of a roll back so I don't delete the data without copying it to the destination server.
So what I want to ask is is that possible using Execute SQL task to write the script? if not how do I approach to it?
And I need some help with the roll back script as well..( IF previous task fails ..... ELSE Go on to the next task )
any help is appreciated!
MODERATOR COMMENT: Please don't wipe out your posts.
View 4 Replies
View Related
Sep 28, 2006
I've got two Sql Tasks on my dtsx. The first one loads a value into "Proyecto" user variable and the second one executes a variable named "SegundoProceso" which contains from the beginning:
"select Fecha from LogsCargaExcel where Proyecto = " + @[User::Proyecto] +""
As SqlSourceType propety I have "Variable" and inside ResultSet or Parameter Mapping nodes there is nothing.
[Execute SQL Task] Error: Executing the query ""select Fecha from LogsCargaExcel where Proyecto = " + @[User::Proyecto] +""" failed with the following error: "Cannot use empty object or column names. Use a single space if necessary.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Where am I wrong?
TIA
View 12 Replies
View Related
Jan 3, 2007
Hi,
I have an Execute SQL Task (OLE DB Connnection Manager) with a SQL script in it. In this script I use several SQL variables (@my_variable). I would like to assign an IS variable ([User::My_Variable]) to one of my SQL variables on this script. Example:
DECLARE @my_variable int
, <several_others>
SET @my_variable = ?
<do_some_stuff>
Of course, I also set up the parameter mapping.
However, it seems this is not possible. Assigning a variable using a ? only seems to work in simple T-SQL statements.
I have several reasons for wanting to do this:
- the script uses several variables, several times. Not all SQL variables are assigned via IS variables.
- For reading and mainenance purposes, I prefer to pass the variable only once. Otherwise every time the script changes u need to keep track of all questionmarks and their order.
- Passing the variable once also makes it easier to design the script outside IS using Management Studio.
- This script only does preparation for the actual ETL, so I prefer to keep it in one task instead of taking it apart to several consecutive Execute SQL Tasks.
- I prefer to use the OLE DB connection manager because it's a de facto standard here.
Could anyone help me out with the following questions:
- Is the above possible?
- If so, how?
- If not, why not?
- If not, what would be the best way around this problem?
Thanx in advance,
Pipo
View 6 Replies
View Related
Oct 20, 2004
How do I set an On Failure when a Tranform Data Task fails? I'm pulling in a text file and if the set the On Failure for the text file connection it says "Defining precedences between the selected items is not valid", and if I set the On Failure for the database connetion is doesn't execute when the tranform data fails. Any ideas on how capture this error?
View 3 Replies
View Related
Apr 4, 2007
i use email task and it dosent send an email at all....this task causes an error..
If i need to set up email for the package if the package fails...
or how should i set in the sql server agent...iknow there is an option there but i dont know how to..
Please let me know...
View 18 Replies
View Related
Apr 26, 2007
Hi,
I tried to set up the send Mail Task and got the following message, however can't receive any message:
SSIS package "Package.dtsx" starting.
Error: 0xC002F304 at Send Mail Task, Send Mail Task: An error occurred with the following error message: "Failure sending mail.".
Task failed: Send Mail Task
SSIS package "Package.dtsx" finished: Success.
The program '[3628] Package.dtsx: DTS' has exited with code 0 (0x0).
Can somebody tell me why?
Thanks,
View 1 Replies
View Related
Aug 16, 2004
In my DTS package, is there any way to pass the task name and error description to another task that gets called on the task's failure?
View 1 Replies
View Related
Sep 25, 2007
Hi,
The send mail task in ssis was failing with following error
[Send Mail Task] Error: An error occurred with the following error message: "Failure sending mail.".
Progress: The SendMail task is completed. - 100 percent complete
Task Send Mail Task failed
The firewall for SMTP server was opened.
And successful in sending mail using Database Mail task from the sql server
Do any one have idea why this difference is? Do any one ever faced similar issue?
One reason I could found is McAfee virus scan policy is stopping the SSIS Send mail task.
(source: 9/25/2007 9:00:04 AM Blocked by port blocking rule C:Program FilesMicrosoft SQL Server90DTSinnDtsDebugHost.exe Anti-virus Standard Protection : Prevent mass mailing worms from sending mail 10.237.5.105:25)
Thanks
View 12 Replies
View Related
Jan 10, 2008
I have written an SSIS package with a Transfer SQLServer Objects task which I want to use to copy database objects from a SQL Server 2000 database to SQL Server 2005.
When I run this task, I find the following error:
[Transfer SQL Server Objects Task] Error: Execution failed with the following error: "Version80 database compatibility level is not supported
Is there a way around this aside from changing the compatibility level of my SQL Server 2005 database?
Any help is much appreciated.
View 5 Replies
View Related
Dec 2, 2006
Hi,
I am developing an SSIS package and need the execution of the package to continue even if one of the tasks within the package fails. I have an OnError event handler for this task which fires when it fails but want the rest of the package to continue.
Any suggestions greatly appreciated.
Thanks
View 4 Replies
View Related
Jan 29, 2008
I've got a couple of backup database tasks setup to run one after the other. The are set up the same, Alldatabases, backup to a device each, and overwrite every time. The task on databases full works fine but the one on logs fails every time, right away with the following rather esoteric error pulled from logging in the event log.
Event Type: Error
Event Source: SQLISPackage
Event Category: None
Event ID: 12550
Date: 29/01/2008
Time: 09:54:11
User: OILCATSsqlservice
Computer: GUNKVBPROC
Description:
Event Name: OnError
Message: The Execute method on the task returned error code 0x80004003 (Object reference not set to an instance of an object.). The Execute method must succeed, and indicate the result using an "out" parameter.
Operator: OILCATSSqlService
Source Name: Back Up Database Task 1
Source ID: {BF117128-FB4C-470D-AC00-4C68797C2C97}
Execution ID: {450BA60C-2EBF-453B-B3E4-80FBC2042F83}
Start Time: 29/01/2008 09:54:11
End Time: 29/01/2008 09:54:11
Data Code: -1073594108
What is this elusive Execute method that is only relevant to the log aspect of this task?
View 2 Replies
View Related
