I have a script task and the code has a path in it, which has to be changed for Dev, for QA and for Prod. I am trying to put this in Package configurations. Can somebody tell me , as how to set the variable, how to set the value etc in getting this done. I want to put this in Package Configurations.
Thankyou.
Hi everyone,
For first time I'm testing this task and surprisingly, when I try "Edit Package" option:
1)The DTS host failed to load or save the package properly
2)The selected package cannot be opened
3)Error HRESULT E_FAIL has been returned from a call to a COM component
But after these messages you can see all the tasks but they haven't name!!
It seem as if RCW mechanism has failed between managed and unmanaged coded-partially.
I don't dare to follow doing more stuff, I don't know if that package is well-loaded or not from there. ?¿
Any guidance or idea about this?
Hi friends,
I have a for each loop that populates from a set of flat files into a Sql Server table, I run the Flat file Import via a dts package embedded into Execute DTS 2000 Task. I want to pass the Sourcefile Name that is fetched by the For Each Loop to assign it Global Variable in DTS. how this can be made ?
Thanks
Subhash Subramanyam
While Creating a script task in Control Flow, I am getting "Package Validation Error". Here is the complete message:
Error at Validate File and Load Data: The task is configured to pre-compile the script, but binary code is not found. Please visit the IDE in Script Task Editor by clicking Design Script button to cause binary code to be generated.
(Microsoft.DataTransformationServices.VsIntegration)
As mentioned in the message, I opened the script IDE and added the code I need. When I close the VSA IDE, package designer displays the same error message.
The worst part of whole story is that if I close the package designer and reopen it, I find that all the code I wrote in the script task has been deleted by the package designer. This is not at all acceptable as I saved the package the and still lost all my work. I did all the coding from scratch for that task.
Please respond if anyone faced similar problem.
Thanks in advance!
Anand
PS: If any one from Microsoft is reading this, please see what you guys are coding there. Due to the buggy software you deliver, I am loosing my credibility.<P< P>
I am having problems executing a child package from a parent package using the Execute Package Task. I am attempting to run the master package through a SQL Server Agent job.
The SQL Server Agent job is owned by sa. The step that runs the parent package is configured to load the package from the SSIS Package Store on the same server that the job is running.
I have the Execute Package Task configured as follows:
Location: SQL Server
ExecuteOutOfProcess: True
Connecting as a SQL Server login (let's say TestEtl)
I have added the db_dtsoperator database role to both the TestEtl login and the login that SQL Server Agent connects through. I have also configured the child package's reader role to include db_dtsoperator. Per http://msdn2.microsoft.com/en-US/library/ms141053.aspx, this should allow these logins to run the child package.
I have enabled logging of all events in both the parent and child packages. I see the following in the logs when the Execute Package Task executes (omitted portions unrelated to the execution of the child package task):
450939 OnPreExecute ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450940 OnPreValidate ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450941 OnPostValidate ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450942 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_pre: The object is ready to make the following external request: 'IDataInitialize::GetDataSource'.450943 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_post: 'IDataInitialize::GetDataSource succeeded'. The external request has completed.450944 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_pre: The object is ready to make the following external request: 'IDBInitialize::Initialize'.450945 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_post: 'IDBInitialize::Initialize succeeded'. The external request has completed.450946 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_pre: The object is ready to make the following external request: 'IDBCreateSession::CreateSession'.450947 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_post: 'IDBCreateSession::CreateSession succeeded'. The external request has completed.450948 OnError ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 Error 0x80070005 while preparing to load the package. Access is denied. . 450949 OnError ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 Error 0x80070005 while preparing to load the package. Access is denied. . 450950 OnTaskFailed ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450951 OnPostExecute ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450952 OnWarning ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors. 450953 OnPostExecute ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450954 PackageEnd ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 End of package execution.
I am sure that what I am doing is quite common, and I obviously have something misconfigured somewhere - but I'm not sure what my misconfiguration is. Can anyone enlighten me?
I use a execute package task to run a child package in which I run some sql task.
as the error handle I insert a script task and link a line from execute package task to script task
of course the line is red,
but I found when the child package failed, the execute package task turns red,it stopped
the script task can't be run, I don't konw why?
Hi,
I am calling one SSIS package from another using the Execute Package Task.
I also need to pass a parameter to the called SSIS package.
Can I do this? If yes, how? If no, then what will be the work-around for this?
Thanks in advance.
I am using many Execute Package Tasks in a DTS packages to call a number of other DTS packages. The problem is that when I change one of the called DTS packages the execute package task does not run the updated packages. It looks like the execute package task references a Package ID guid instead of the name. Is there a way to make it so a change to a called DTS package will reflect in all references to it
View 2 Replies View RelatedI am missing something simple that's killing me.
I am trying to execute a child ssis package using the execute package task. I add execute package task to the parent package and in the package task editor, under the package options I choose: filesystem for location, I choose new connection and create a connection to the package on the filesystem I want to execute, packagenamereadonly is blank. I execute the parent package and get an error that I did not specify the name of the package in the execute package task object. Now, since I can't populate the package name, as that option is readonly, I am not sure how to remove my headache. Anyone see what I'm doing wrong? None of these packages have security.
-Aaron
hello to every body.. well i have a problem.. well i created a package the task of which is to update thedimensions and the fact tables from the tables of source.
i created a configuration file with all the parameters that are nedded (connections managers; parameters of packages).this config file will include all the paremeters need for the execution of other packages
In that package i call an other package (execution package task). this package normally will take the parameters of the parent package isn't it??(i put the parameters of this package to the config file of the parent package).
i must also note that for the second package called there is also a package...
i must also note that i have 2 DWHs (a and b) for testing.
the problem is that when i execute the parent package to DWH b , the sacond package called do not take the parameters of the parent package. instaed it looks to its XML configuration file(in a different location of the config file of the parent package) which contains the connection parameters to DWH a and it calls strored procedures from the DWH a (instead of calling at SP from DHW b).
any ideas??
thnx a LOT0
Hi All,
I have a master package that has 3 child packages,so iam taking the child packages from the D drive of my QA machine.
I have used environmental variables to define the path in packages configurations,so that same environmental variables can be used to point to production server path.
The package is able to run on production server but it still fetching data from QA server.
Is the any other way to do it better.
How to use the subpackages in production server.
Please help.
Thanks,
SVGP
I would like to know if it is possible to use dtexec to run a specific task in a package? If so how?
View 4 Replies View RelatedHi,
Thanks for reading.
I am creating a DTS package to import a .txt file into sql. I have everything in place, but the text file needs to have the last record deleted before the import. I need help with this part
I would like to delete the last record from a fixed width text file before I import it into sql. The number of rows will vary from file to file.
Can any one offer suggestions on the best way to do this.
I understand that I have to use the FSO to open and read the file, but I am not sure the best way to proceed after that.
Thanks in advance,
Steve
I have five DTS packages on a server.
Instead of executing these DTS packages individually, I have decided to create a 'parent' DTS package that will fire off each of the five 'child' DTS packages using 'On Success' precedences.
This seemed like a pretty straight forward task, but when one of the child DTS packages fails, the 'parent' DTS package continues to execute the next 'child' DTS package through the 'On Success' precedence. I was expecting the 'parent' DTS to fire off an 'on failure' precendence and stop executing
Can anyone tell me why the 'parent' DTS package continues with the 'on success' precedence after one of the 'child' DTS packages has failed.
Thanks in advance.
In a DTS package, I have various SQL tasks which are linked by workflows, either 'on success' or 'on failure'.
What is the sql statement for making a sql task fail so that it follows the 'on failure' workflow?
Thanks
I have a package A which has execute package task which tryes to execute package B.
I am able to execute package B directly but when i execut epackage A.Its able to open package B but its failing at the very first task in B.The error iam getting is like this
Error: The task "Setup Connections" cannot run on this edition of Integration Services. It requires a higher level edition.
Has any one come accross this before...Help
Thanks
I've searched everywhere for this but can't find the answerI want to run a DTS package that simply executes a SQL statement to geta count of rows in a table, if the resulting number is greater thanzero I want to execute another step in the same package, else justquit.I don't to pass global vars from one package to anotherHow can I do this?Any help would be great
View 1 Replies View Related
Hi,
I have a Load package which calls 3 other subpackages within it through the execute package task.
When i run the package thru batchfile it runs fine.
But when we run thru Autosys job scheduler i get the following error for the subpackages.
Code: 0xC00220DE
Source: Execute Package Task1
Description: Error 0x80070003 while loading package file "". The system cannot find the path specified.
i have given the path in the config file,which has the server name and the path of the subpackages.
Has anyone come across this situation before.
Pls help!
Thanks,
SVGP.
I'm trying to run a package from another package using Execute package task -
I'm getting the error:
Error: Error 0xC0012050 while preparing to load the package. Package failed validation from the ExecutePackage task. The package cannot run. .
I have Delay validation on the child package. Any other suggestions?
Thanks
In Dts you can loop a package by creating an Active-X script with something like this ...
"oPackage.Steps("DTSStep_1").ExecutionStatus = DTSStepExecStat_Waiting"
"oPackage.Steps("DTSStep_2").ExecutionStatus = DTSStepScriptResult_DontExecuteTask"
What is the way to do in SSIS? Depending on a condition i want to rerun my package but have not found a smooth way to do it. I guess you can do it in a better way than using the ActiveX Script Task
have a nice day
/Erik
I€™m using a For Loop container to with an Execute Package Task inside, looping until a folder is empty. I€™ve noticed some strange behaviors:
1. The child package keeps creating new connections. I start with 3 connections to the DB and when the For Loop container is done I€™ve got 364 connections.
2. The Execute Package Task is pulling the wrong version of the package I€™ve specified. I€™m using a package saved to the File System and there€™s only one copy on the drive. I€™ve verified the path is going to the correct location.
Does anyone have a work-around for the €˜connection generation€™ issue?
TIA
Eric
I have added a package from SQL Server to another package as an "Execute Package Task" it fails with this error:
Error: Error 0xC0014062 while preparing to load the package. The LoadFromSQLServer method has encountered OLE DB error code 0x80040E14 (Only the owner of DTS Package 'nVision_AgentPump' or a member of the sysadmin role may create new versions of it.). The SQL statement that was issued has failed. .
I tried setting the Protection Level to "don't save sensitive", and running the package in process and out. Any idea where to look?
Thanks,
Kayda
I'm working with 2005 SSIS and am getting the below error associated with a query when
I try and set up a package that runs other package tasks. It errors in the Package Name (..) lookup after I enter what appears to be a validate location (sql server) and connection information.
I located a post suggesting to add an mmc certificate but that did not seem to help.
I'm sort of assuming that if it was id/passwd related i'd get a more specific error..
Any info would be much appreciated...Thx Owen
An OLE DB error 0x80004005 (Client unable to establish connection) occurred while enumerating packages. A SQL statement was issued and failed.
------------------------------
Program Location:
at Microsoft.SqlServer.Dts.Runtime.Application.GetPackageInfos(String strFolder, String serverName, String serverUserName, String serverPassword)
at Microsoft.SqlServer.Dts.Tasks.ExecutePackageTask.PackageBrowser.<>c__DisplayClass1.<EditValue>b__0(String path)
at Microsoft.SqlServer.Dts.Tasks.ExecutePackageTask.PackageBrowser.EditValue(ITypeDescriptorContext context, IServiceProvider provider, Object value)
===================================
An OLE DB error 0x80004005 (Client unable to establish connection) occurred while enumerating packages. A SQL statement was issued and failed.
------------------------------
Program Location:
at Microsoft.SqlServer.Dts.Runtime.Wrapper.ApplicationClass.GetPackageInfos(String bstrPackageFolder, String bstrServerName, String bstrServerUserName, String bstrServerPassword)
at Microsoft.SqlServer.Dts.Runtime.Application.GetPackageInfos(String strFolder, String serverName, String serverUserName, String serverPassword)
I have a package (i.e. child package) which runs itself perfectly fine without displaying any error.
However when I embeded this package inside another package (i.e. parent package) using Execute Package Task. The task always fails. It seems strange enough.
The child package has two variables that need to be passed in from parent package.
Can any expert here please help out? Thanks.
- Steve
I'd like to use a SQL Task to execute a stored proc, which checks for a value, and if I don't like the result, raise an error. If the stored proc fails I'd like the package to fail as well.
When I run the stored proc outside of the package, it fails as it should. However, when I run it in the package, the package does not fail. It moves on to the next task and completes normally.
Any ideas on what I may be doing wrong?
Thank you,
Perry
I can't open design Script part in Script task. I get the following message:
TITLE: Microsoft Visual Studio
------------------------------
Cannot show the editor for this task.
------------------------------
ADDITIONAL INFORMATION:
Specified cast is not valid. (Microsoft.VisualBasic.Vsa.DT)
------------------------------
BUTTONS:
OK
------------------------------
I use to be able to do this, but all of a sudden I can' open my old script tasks or create new ones.
Any help on this would be appreciated
Cheers
Marina
Hi All,
I have strange problem. I have a package task that is setup to run a package from a file source. The package ran fine originally but VS placed a shared drive letter for the path. I went back to change it to a UNC path and now the package fails and gives an error saying the connection is not valid and that it failed validation. Going back into the connection manager to check the path and it looks good, even pressing the Browse button shows the correct directory.
What am I doing wrong?
Hi,
Is there anyway where i can pass the package name to an "execute package task" and run it through loop. My loop task will pass the package name which is assigned on a variable and the execute package task should pickup the name and run, is this possible, if yes how?
Hi,
We have used an execute package task in our master package to execute a child package and we have set the execute out of process=false. This master package is running fine in 32 bit server but is failing in 64 bit server. is there any settings to be done in the server or is it the problem with the property setting(execute out of process)
Vivek S
Hi,
I have a package in which there are four tasks. I have to get the status of those four tasks and finally send a mail. I am unable to get the status for individual task.
Has anyone tried this? Please help.
Thanks in advance.
I have an SSIS package that fires an OnTaskFailed event whenever any of my tasks fail.
I would like to put any SSIS task failure message into a user defined variable.
Any idea how to do this?
Any help appreciated.
Regards,
Paul.
Currently, I'm developing an ETL program using Microsoft DTS on SQL Server 2000.
I've completed unit testing & component testing for all inner packages containing various types of executions - SQL task, ActiveX Script task, Error Handler, Transform Data task, Data Driven Query & Dynamic Properties task.
When unit & component tested, all inner package properties-"Limit the maximum number of tasks executed in parallel" is defaulted to 4.
However, the integration testing is failing because I've yet to successfully execute any of the Package tasks in the outer package, which runs & controls all inner packages from the outer package.
The error message encountered was:
---------------------------------------------------------------
| Error source: microsoft dts |
| Error description: execution was cancelled by another user. |
---------------------------------------------------------------
Please explain what might be the cause to this problem when I'm executing the outer package?
Hello,
I have several DTS packages that take data from SQL Server and exports them onto an Access DB located on the network. Basically, one Execute Process Task from within my DTS package takes the Access DB and zips it while another such task copies the zipped DB and pastes it onto another location on the network. All this works fine.
This export process happens once a month so each month I have to manually add a datestamp to the end of the Access DB file that’s being exported to distinguish it from prior month's export. For example, this month's export file would have AccessDB_20040727.mdb name and the next month it would be AccessDB_20040820.mdb (date is determined based on the date the output is exported on). AccessDB.mdb is the default name of the export DB and datestamp is added at the end of the file name depending on what date the export was run. As I said, I can do this manually each month and it works fine.
I want to, however, know if there is a way to automatically supply the datestamp to the Execute Process Task's Parameters' text box? Following is what I have right now in the Parameters box:
\ghf1-ndc8-sqll$productionoutputlob200406LOB_CF_forDril ldown_All_20040727.zip \ghf1-ndc8-sqll$productionoutputlob200406LOB_CF_forDril ldown_All.mdb
I want to take above text from the parameters box and replace it with something like:
\ghf1-ndc8-sqll$productionoutputlob200406FileName_RunDa te.zip \ghf1-ndc8-sqll$productionoutputlob200406LOB_CF_forDril ldown_All.mdb
Where FileName_RunDate is a variable/placeholder for the name of the output with the datestamp the output is exported on.
There are three different Execute Process Tasks that are happening within each of my DTS packages so it's a time consuming job to have to manually add a datestamp to each package every month when data is exported.
Does anyone know if what I am asking is doable? If I can use a variable in the parameters box of each Execute Process Task’s properties and supply current datestamp values to it prior to executing the package each month? If so then what are the ways? How would I do that?
Thanks much.
JN