Script Line Number
Jul 20, 2005
When you get a server error message referring to a line number in a
script, is there an easy way to jump to the correct line? It's not
easy to count down in a big script or when there is a lot of white
space.
In WordPerfect we had a linenum macro that allowed you to enter the
line number and it would jump to the line using the same counting
method as the interpreter that generated the error message. Is there
something similar with TSQL, or another way?
Kerry
View 2 Replies
ADVERTISEMENT
Feb 16, 2004
Hi,
How do you generate line numbers in Transact SQL?
Example:
In Sybase, I could use this...
select number(*), customer_name from customer_table
number(*) customer_name
----------------------------------------------------
1 Customer Name 1
2 Customer Name 2
3 Customer Name 3
Thanks,
Geoff
View 2 Replies
View Related
Sep 1, 2006
when we get something like this in QA:
Server: Msg 170, Level 15, State 1, Line 3
Line 3: Incorrect syntax near ','.
I only have 3 lines inclusing only one insert. How do I know what value or keyword is wrong from the error message above.
Thanks
View 4 Replies
View Related
Jul 22, 2007
Hello.
I have a query That look like that:
"SELECT COUNT(*),MONTH FROM TABLE GROUP BY MONTH"
The result is:
Jun 2
Feb 2
Mar 3
Apr 0
May 5
What I want to have is that every month will sum up the previous month and him self so in the end I will be able the create a graph wuth those numbers:
Jun 2
Feb 4
Mar 7
Apr 7
May 13
Any ideas on how to start?
View 3 Replies
View Related
Sep 7, 2006
I have a large query that I am trying to debug in query analyzer.However, the errors I get have no line number or reference to wherethey are failing. How can I find out what line in the query is causinga particular error message to appear?ThanksJohn IveySouth Pike School District
View 2 Replies
View Related
Jul 22, 2007
Hello.
I have a query That look like that:
"SELECT COUNT(*),MONTH FROM TABLE GROUP BY MONTH"
The result is:
Jun 2
Feb 2
Mar 3
Apr 0
May 5
What I want to have is that every month will sum up the previous month and him self so in the end I will be able the create a graph wuth those numbers:
Jun 2
Feb 4
Mar 7
Apr 7
May 13
Any ideas on how to start?
View 1 Replies
View Related
Feb 4, 2004
i have a huge stored proc which has about 8-9 cursors which move data from a few temp tables to the final tables...and also do lots of calculations in between..
anytime there is an error in the stored proc i have an error page which looks like this
**********************
Server Error in '/WebApplication3' Application.
--------------------------------------------------------------------------------
Error converting data type varchar to bigint. 139 pdiscnum 37 3429 4978 139 139 4979 50.93 189.93 4980 -189.93 0 4981 139 139 4982 -139 0 4986 23 23 4987 0 23 4988 0 23 5121 139 162 5122 -328.93 -166.93 3430 4983 89 89 4984 -89 0 5096 89 89 5097 -178 -89 5135 89 0 5144 139 139 3431 4989 89 89 4990 -89 0 5100 89 89 5101 -178 -89 3432 4991 139 139 4992 4.32 143.32 4993 -143.32 0 5102 139 139 5103 -278 -139 3433 4994 139 139 4995 50.93 189.93 4996 8.64 198.57 4997 -198.57 0 5003 0 0 5123 139 139 5124 -328.93 -189.93 3434 4998 59 59 4999 -59 0 5000 59 59 5001 -59 0 5002 0 0 5041 19 19 5042 0 19 5043 -2.39 16.61 5044 -16.61 0 5045 19 19 5046 -2.39 16.61 5047 -16.61 0 5056 0 0 5084 39 39 5085 -5.85 33.15 5086 -49.76 -16.61 5104 59 42.39 5105 .........
************************************************
a very lengthy page...the numbers are prbly due to the print stmts of the results of some calculations...
but my q is..is there any way to return the xact line number where the error occured in the stored proc instead of these infinite list of numbers...its taking pretty long time to go through the entire stored proc to isolate the error...
thanks
dinakar
View 4 Replies
View Related
Jan 24, 2006
I am wanting to set up a trigger on our SQL server 2000 to create a sequential order line number in the OrderDetails table for OrderID.
I will be inserting data from an OrderLinesAdd table into the OrderLines table but want the LineNumber field to be incremented by 1 for each group of orders grouped by OrderID that I insert into the table eg.
OrderID LineNumber
1 - 1
1 - 2
1 - 3
2 - 1
2 - 2
3 - 1
3 - 2
I have just started using SQL so am not sure how I go about writing the code for the trigger ? It would seem like I will need to use the Max function in the code.
Thanking you in advance.
View 3 Replies
View Related
Dec 27, 2007
Hi there,
I have a matrix report that shows a certain columns and rows. I need a row counter to show me the amount of rows in that matrix but it doesn't count properly by using the expression: =Int(RowNumber("matrix1") -1)
I actually don't have any idea on what this expression should be to fix the row count...to illustrate what I get in the report:
______________________________________________________________________________
Chkp | Row | Serial No | Call of Date |Colour| Pillar | AV | Sport | USA | SRA | TAPE |
2019 | 1 | 7006892 | 2003/02/11 | 3644 | 78222 | 3902 | 9182 | | | |
| 3 | 7000123 | 2003/02/11 | 3299 | 17283 | | 9238 | 2793 | | |
| 5 | 7302031 | 2004/01/11 | 3902 | 28932 | | 3233 | 2332 | | |
| 7 | 7273211 | 2004/02/08 | 6727 | 39232 | 8228 | 3293 | | | |
| 8 | 7382728 | 2004/11/11 | 7822 | 32342 | 3902 | | | | |
| 13 | 7342934 | 2004/12/03 | 8323 | 23422 | 2031 | 9212 | 2934 | 2934 | 2982 |
| 18 | 7329491 | 2004/13/02 | 8291 | 92423 | 7922 | 0231 | 2342 | 2355 | 2223 |
| 22 | 7328438 | 2004/12/22 | 8399 | 92311 | | 0289 | 8392 | | 3982 |
As you can see above, the row count numbers are not lining up at all, it starts at 1, then jumps 2 every count then all of a sudden jumps 5 per line...a pattern that is interesting but difficult to understand. The unique value in this matrix is that serial number but even though i group it by the serial number, it still gives me the funny Row count values.
What would be the approach to solving this?
Regards
Mike
View 3 Replies
View Related
Jul 27, 2007
Hello all
Trying to delete some data from a SSCE (2005) DB produces the exception:
SqlCeException
There was an error parsing the query. [ Token line number = 1,Token line offset = 43,Token in error = C]
Here is the code I am using
string dsc = Application.StartupPath + "\FCDB07.sdf";
conn = new SqlCeConnection("DataSource = " + dsc);
conn.Open();
cmd = conn.CreateCommand();
cmd.CommandText = "DELETE FROM DataContainer WHERE FileName =" + dgContainers[0, SelRowIndex].Value.ToString();
cmd.ExecuteNonQuery(); //There was an error parsing the query. [ Token line number = 1,Token line offset = 43,Token in error = C ]
conn.Close();
Any Idea on What causes this?
TIA
Trophus
View 3 Replies
View Related
Nov 23, 2007
Hey all-
I'm trying to insert some values into an SQL Compact database on a WM6 device but there is something apparently wrong with my SQL statement...
The program is going to allow users to schedule an SMS message to be sent at a certain date and time. I'm using a database to keep track of the scheduled SMS messages. The database has 3 rows: phone number, message, and the date/time to be sent.
Here is the relevent code:
private void scheduleMenu_Click(object sender, EventArgs e)
{
//connect to DB and do our scheduling magic
string message = messageBox.Text; //should rename messageBox...
string phoneNum = phoneNumBox.Text;
string dataBase = @"Program FilesSMS_Scheduler2SMSDatabase.sdf";
//SqlCeEngine eng = new SqlCeEngine(dataBase);
SqlCeConnection conn = new SqlCeConnection("Data Source=" + dataBase);
conn.Open();
//insert phone number, message text, and date/time into DB
string cmd = "INSERT INTO Scheduler(phoneNum, message, date) VALUES("+ phoneNum + ", "+ message + ", "+ dateTimePicker1.Value +")";
SqlCeCommand cmdPhone = new SqlCeCommand(cmd,conn);
cmdPhone.ExecuteNonQuery(); //error occures here...
messageBox.Text = "";
MessageBox.Show("Message Scheduled!");
}
I'm guessing it doesn't like how I am trying to get the data from the different text boxes and the DateTimePicker to go inside the SQL command. Does anyone have any ideas on how to fix my SQL command or how to get data from a textbox and DateTimePicker to be inserted into a database a different way?
View 3 Replies
View Related
Dec 1, 2006
Hi,
I want set a specific port number of SQL Server(express) during installation not by Configuration Manager after install.
Is it possible?
View 1 Replies
View Related
May 8, 2008
Can you help me with SQL issue I€™m stuck on?
I wish to take source data that looks like this:
Invoic_num
Line_num
6658
0
6658
2
6658
8
7721
2
7721
3
And rebuild the line numbers like this:
Invoic_num
Line_num
6658
1
6658
2
6658
3
7721
1
7721
2
This seems completely impossible to me. So I was thinking that maybe a second procedure using update could be run against the table after the initial build.
View 10 Replies
View Related
Jun 12, 2006
hi all,
maybe this is not a serious problem, but I tried for days to come toi a solution without success.
My Problem:
I have have several flatfile sources I need to import into a sql-server 2005 DB.
It is very important for me to have the original line number from inside the source file for each record. The rowcount transform doesn't fit in for this task, because it accumulates all rows until the end of the dataflow.
I tried script components and it works fine if i assume there are no errors in my source. then I simply could declare a local variable and count it up and add a custom collumn to my output. But for errors in my source this won't work, because a second script component won't know the actual value of a package level variable, which i use to store the value, because i am only allowed to access this variable in the post execujte method of the script.
How can I achieve my goal? Please help me...
Thanks in advance .. Bernd
View 11 Replies
View Related
Mar 22, 2006
Hello everyone,
I'm having an issue with dynamically setting the Send Mail task's to field to decent sized recipient list(approx 15 email addys). The strange thing is that this same package works fine if I'm using a list of say 4 email addys. I have double checked everything I can think of....list is seperated by semicolons, each address looks good....and have ran script tasks to check my variables along the path of the package but so far have not found the reason. The error I get is below:
"The specified string is not in the form required for an e-mail address"
Also of note, these addresses are being populated from a table, that is then setting the To string of the send mail task via a seperate variable...that variable being populated from a foreach loop. Again, all of this works fine with a smaller recipient list. Any ideas?
The only thing I can think of right now is to run the send mail task within the foreach loop...but then I'll be sending a seperate email for each address and would like to avoid that if possible.
Thanks,
Adrian
View 6 Replies
View Related
Feb 27, 2007
Hi,
for some AP issue, the file I upload must be without the line feed/carriage return in the last line.
for example:
original fixed-length file (exported from SSIS)
line NO DATA
1 AA123456 50 60
2 BB123456 30 40
3 CC123456 80 90
4 <-- with line feed/carriage return in the last line
The file format that AP request. The file only has 3 records, so it should end in the third line.
line NO DATA
1 AA123456 50 60
2 BB123456 30 40
3 CC123456 80 90
Should I use script component to do it ? I am new for VB . Anyone would help me ?
Thank you all.
View 1 Replies
View Related
May 4, 2012
I need the Trend line for the following data in Line chart they are the following data. The following are the graph are my output and i need the trend line for these Key_gap value.
This is the link [URL] ....
I need the same trend line for the Bar-Chart in SSRS 2005.
View 5 Replies
View Related
Aug 31, 2007
I hope I'm posting this in the correct forum (forgive me if I'm not) since I'm not sure if this is an issue with inserting an item into a db or the processing of what I get out of it. I wrote a basic commenting system in which someone my post a comment about something written on the site. I wanted to keep it very simple, but I at least want the ability for a user to have newlines in their comment without having to hardcode a <br /> or something like that. Is there a way for me to detect a newline if someone, for example, is going to their next paragraph?
Let me know if you need a better explanation.
Thanks in advance!
View 4 Replies
View Related
Nov 8, 2006
G'day everyoneThat's a space between the ticks.It's all part of a longer script but seeing as the failure occurs online 1if exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[config]') and OBJECTPROPERTY(id, N'IsUserTable') =1)drop table [dbo].[config]GOThat's three lines only. Does it matter that they're in Unicode?Any ideas?Kind regards,Bruce M. AxtensSoftware EngineerStrapper Technologies
View 3 Replies
View Related
Feb 7, 2007
We have a line graph which plots the actual data points (x,y), everything is working fine with this graph. Now we need to add a trend line to this existing graph after going thro. the articles we came to know that there is no direct option in SSRS to draw a trend line. So we need to calculate the trend values ourselves which we need to plot as atrend line. This trend line is similar to the trend line which comes in Excel chart, do anyone know how to calculate the trend values from the actual data points. We got through several formulas, but were not clear, have anyone tried out exactly the same, if so please help us out by providing an example to calculate the trend values.
View 1 Replies
View Related
Oct 26, 2007
I have a line graph which shows positive and negative values. Is it possible to have the line one color when its negative and another when its positive?
kam
View 4 Replies
View Related
Sep 29, 2001
HEllo can anybody tell me how to monitor a long store procedure
line by line. Also how to put progress bar in it to tell user how
much is done.
Sabih.
View 1 Replies
View Related
Dec 12, 2007
Hi,
When creating a line chart, I would like to be able to show Markers for the data points, but no line between these points (as you can do in excel).
I have set the line setting to none (for the lines of interest), however the lines still show.
Is this a bug, or am i missing something obvious settings-wise?
Cheers,
M
View 7 Replies
View Related
Dec 28, 2007
HiIt's my stored procedure 1 CREATE PROCEDURE singleSearch2
2 @SQ nvarchar(30),
3 @pType nvarchar(11),
4 @pCol nvarchar(11)
5 AS
6 BEGIN
7 DECLARE @SQL NVarChar(1000)
8 SELECT @SQL='SELECT *,'
9 SELECT @SQL=@SQL+' CASE RTRIM(LTRIM(op))'
10 SELECT @SQL=@SQL+' WHEN '+CHAR(39)+'e'+CHAR(39)+' THEN '+CHAR(39)+'اجاره'+ CHAR(39)
11 SELECT @SQL=@SQL+' WHEN '+CHAR(39)+'r'+CHAR(39)+' THEN '+CHAR(39)+'رهن'+CHAR(39)
12 SELECT @SQL=@SQL+' WHEN '+CHAR(39)+'f'+ CHAR(39)+' THEN '+ CHAR(39) +' Ù?روش '+CHAR(39)
13 SELECT @SQL=@SQL+' WHEN '+CHAR(39)+'e r'+CHAR(39)+' THEN '+CHAR(39)+ 'اجاره - رهن '+CHAR(39)
14 SELECT @SQL=@SQL+' WHEN '+CHAR(39)+'e f'+CHAR(39)+' THEN '+CHAR(39)+'اجاره - Ù?روش '+CHAR(39)
15 SELECT @SQL=@SQL+' WHEN '+CHAR(39)+'r f'+CHAR(39)+' THEN '+CHAR(39)+' رهن - Ù?روش '+CHAR(39)
16 SELECT @SQL=@SQL+' WHEN '+CHAR(39)+'e r f'+CHAR(39)+' THEN '+CHAR(39)+'اجاره - رهن - Ù?روش'+CHAR(39)
17 SELECT @SQL=@SQL+' ELSE op END AS xop, CASE LTRIM(RTRIM(type)) '
18 SELECT @SQL=@SQL+' WHEN '+CHAR(39)+'z -'+CHAR(39)+' THEN '+CHAR(39)+'زمین'+CHAR(39)
19 SELECT @SQL=@SQL+' WHEN '+CHAR(39)+'m -'+CHAR(39)+' THEN '+CHAR(39)+'مسکونی'+CHAR(39)
20 SELECT @SQL=@SQL+' WHEN '+CHAR(39)+'t -'+CHAR(39)+' THEN '+CHAR(39)+'تجاری'+CHAR(39)
21 SELECT @SQL=@SQL+' ELSE [type] END AS [xtype] FROM [data] '
22 SELECT @SQL=@SQL+' WHERE ([type] LIKE %'+CHAR(39)+@pType+CHAR(39)+'%) AND ('+@pCol+' LIKE %'+CHAR(39)+@SQ+CHAR(39)+'%)'
23 Exec (@SQL)
24 END
25 GO
and i face this error: Line 1: Incorrect syntax near '-'.
View 3 Replies
View Related
Jan 16, 2008
Hi
Anyone have any idea how to make a line style dashed or dotted in a line chart please?
If I change the series style to dashed or dotted it still appears as a solid line, yet the legend displays a dashed or dotted line....
Thanks
View 7 Replies
View Related
Apr 18, 2008
My question is about coding style for specifying constraints when creating tables.
Two styles for defining constraints:
In-line:
CREATE TABLE Fruit
(
FruitID INT IDENTITY(1,1)
CONSTRAINT PK_fruit PRIMARY KEY CLUSTERED,
FruitName NVARCHAR(50),
FruitTypeID INT
CONSTRAINT FK_fruit_fruit_types FOREIGN KEY
REFERENCES FruitTypes (FruitTypeID) ON UPDATE CASCADE,
DateCreated DATETIME DEFAULT GETDATE()
)
Out-of-line:
CREATE TABLE Fruit
(
FruitID INT,
FruitName NVARCHAR(50),
FruitTypeID INT,
DateCreated DATETIME
)
ALTER TABLE Fruit ALTER COLUMN FruitID INT NOT NULL
ALTER TABLE Fruit ADD
CONSTRAINT PK_fruit PRIMARY KEY CLUSTERED (FruitID),
CONSTRAINT FK_fruit_fruit_types FOREIGN KEY (FruitTypeID)
REFERENCES FruitTypes (FruitTypeID),
CONSTRAINT DF_fruit_date_created DEFAULT
GETDATE() FOR DateCreated
Which style do you prefer and why?
View 2 Replies
View Related
Apr 7, 2007
Hi
If i use this code i cant get the data showed, it show nothing."SELECT COUNT(DogImageDate) AS Amount, DogImageDate, DogImageID FROM EnggaardImages WHERE DogImageDate NOT LIKE (SELECT TOP 1 DogImageDate FROM EnggaardImages ORDER BY DogImageDate DESC;) GROUP BY DogImageDate ORDER BY DogImageDate DESC;"
But if i use this code i get data showed"SELECT COUNT(DogImageDate) AS Amount, DogImageDate, DogImageID FROM EnggaardImages GROUP BY DogImageDate ORDER BY DogImageDate DESC;"
Then i get Images(6)Images(1)Images(1)
But i dont want the first to be showed, therefor i use the Select TOP 1, so i get a look like this
Images(1)Images(1)
But i cant get it to work.
View 2 Replies
View Related
Oct 15, 2007
I have created a local user on Report Server Computer and the user has the administrative rights.
When i try to connect Report Server (http://xxx.xxx.xxx.xxx/reportserver) with this user's credantials. (ReportServer directory security is set -only- to Basic Authentication. ).
I get the following error.
Reporting Services Error
--------------------------------------------------------------------------------
The number of requests for "XXXServerXXXUser" has exceeded the maximum number allowed for a single user.
--------------------------------------------------------------------------------
SQL Server Reporting Services
Then i try to login using a different user with administrative rights on the machine, i can logon successfully.
The system is up for a month but this problem occured today?!? What could be the problem?!?
View 2 Replies
View Related
Sep 24, 2007
Hi
I want to enter rows into a table having more number of columns
For example : I have one employee table having columns (name ,address,salary etc )
then, how can i enter 100 employees data at a time ?
Suppose i am having my data in .txt file (or ) in .xls
( SQL Server 2005)
View 1 Replies
View Related
Jun 23, 2015
Got this query and I need the following result;
declare @NumberToCompareTo int
set @NumberToCompareTo = 8
declare @table table
(
number int
)
insert into @tableÂ
select 4
[Code] ....
The query selects 4 and 5 of course. Now what I'm looking for is to retrieve the number less or equal to @NumberToCompareTo, I mean the most immediate less number than the parameter. So in this case 5
View 4 Replies
View Related
Oct 8, 2006
in my sql, i want to change a decimal number to percent format number, just so it is convenient for users. for example there is a decimal number 0.98, i want to change it to 98%, how can i complete it?
thks
View 4 Replies
View Related
Jun 5, 2007
Hi,
I am currently designing a SSIS package to integrate data into a data warehouse fact table. This fact table has about 70 columns among which 17 are foreign keys for dimension tables.
To insert data in that table, I have to make several transformations and lookups. Given the fact that the lookups I have to make are a little complicated, I have about 70 tasks in my Data Flow.
I know it's a lot, but I can't find a way to make it simpler. It seems I really need all these tasks.
Now, the problem is that every new action I try to make on the package takes a lot of time. At design time, everything is very slow. My processor is eavily loaded each time I change a single setting in one of the tasks, and executing the package in debug mode takes for ages. If I take a look at the size of my package file on disk, it's more than 3MB.
Hence my question : Are there any limitations in terms of number of columns or number of tasks that can be processed within a Data Flow ?
If not, then do you have any idea why it's so slow ?
Thanks in advance for any answer.
View 1 Replies
View Related
Feb 19, 2013
I have a large table of customers. I would like to add a column that contains an integer, unique to that customer. The trick is that this file contains many duplicate customers, so I want the duplicates to all have the same number between them.the numbers dont have to be sequential or anything, just like customers having the same one.
View 8 Replies
View Related
