Scripting Stored Procedure Add With Linked Server Reference When Linked Server Is Not Available
Jul 18, 2006
Is there a way to bypass the syntax checking when adding a stored procedure via a script?
I have a script that has a LINKed server reference (see below) .
INSERT
INTO ACTDMSLINKED.ACTDMS.DBO.COILS ..etc.
ACTDMSLINKED does not exist at the time I need to add the stored procedure that references it.
PLEASE to not tell me to add the LINK and then run the script. This is not an option in this scenerio.
Thanks,
Terry
View 4 Replies
ADVERTISEMENT
Mar 11, 2006
HiWe're trying to use call a stored procedure to update information in aremote Ingres database. We've linked the server, and can readinformation using SELECT * FROM OPENQUERY (..........), but we can'tfind a suitable syntax for executing a procedure.Using SELECT * FROM OPENQUERY and passing the EXEC statement in astring gives a message about not returning any columns - not surprisingas there aren't any, and trying to execute the procedure more directlyusing:-EXECUTE abrs..vipdba.ats_reader_pi0 ........Gives the errorCould not execute procedure 'ats_reader_pi0' on remote server 'abrs'.[OLE/DB provider returned message: Parameter type cannot be determinedfor at least one variant parameter.]Any bright ideas?Chloe
View 1 Replies
View Related
Sep 27, 2007
I have a linked server from Sql Server 2000 to Sybase Adaptive Server 12.5.1.
When i try to call a stored procedure on Sybase from Sqlserver i get the following message:
"could not execute procedure sp_who on remote server 'linked server name'(42000,7212)
command executed from sql server:
exec <linked_server>.<database>..sp_who
i am able to user open openquery for selects and inserts, successfully
Help appreciated
Thanks.
View 4 Replies
View Related
Jul 3, 2006
What is the syntax for creating a update trigger and passing the values which were updated to a stored procedure on a linked server?? Specifically need syntax for updated value, as well as the syntax for executing the stored proc on the linked server.
Thank you
View 1 Replies
View Related
Oct 17, 1999
Greetings,
Facing a strange problem, but obviously not expected earlier on, I am trying to execute a stored procedure via ADO which refrences a linked server table and I get an error specifying
"
OLEDB provider SQLOLEDB does not contain table "<DatabaseName>"."<owner>"."<tableName>"
"
Has any one else encountered this problem before ?
regards
Govind
View 1 Replies
View Related
Oct 17, 2007
Is it possible to reference a temporary global tale (##table) of a linked server using the 4 parts "identifier": linkedserver.database.schema_name.##object_name ??
Thanks in advance for your help.
View 2 Replies
View Related
Mar 23, 2006
I get this error when trying to alter a stored procedure that has an insert statement referencing a new linked server I created:
INSERT INTO [servername].databasename.dbo.DirectReport
...
Msg 18456, Level 14, State 1, Procedure Get_Direct_Pay_Move_Data, Line 17
Login failed for user 'NT AUTHORITYANONYMOUS LOGON'.
I added Administrators and my logon to the permissions of my linked server but still get this error when it tries to save my stored proc...the one which has that insert.
View 4 Replies
View Related
Mar 25, 2002
Hi ,
On my Desktop i registered Production Server in Enterprise Manager
on that Server if i go to SecurityLinked Servers
There is another Server is already mapped, when i am trying to see the Tables under that one of the
Linked Server i am getting the Error message saying that
"Error 17 SQL Server does not exist or access denied"
if i went to Production Server location and if i try to see the tables i am able to see properly, no problems
why i am not able to see from my Desk top
i am using the sa user while mapping the Production Server on my DESKTOP using (ENTERPRISE MANAGER)
And i check the Client Network Utility in the Alias using Named Pipe only, i changed to TCP/IP still same problem
What might the Problem how can i see the Tables in Linked Server from my DESKTOP
Thanks
View 5 Replies
View Related
Apr 24, 2015
I am using Linked Server in SQL Server 2008R2 connecting to a couple of Linked Servers.
I was able to connect Linked Servers, but I cannot point to a specific database in a Linked Server, also, I cannot rename Linked Server's name.
How to point the linked server to a specific database? How to rename the Linked Server?
The following is the code that I am using right now:
USE [master]
GO
EXEC master.dbo.sp_addlinkedserver
@server = N'Machine123Instance456',
@srvproduct=N'SQL Server' ;
GO
EXEC sp_addlinkedsrvlogin 'Machine123Instance456', 'false', NULL, 'username', 'password'
View 6 Replies
View Related
Dec 11, 2007
Hello,
I'm very boggled as to what is going on with my procedure.
I have a procedure that is using linked tables and when I execute it, it take approximately 45 seconds to run it.
However, If i take the exact piece of code and run it in query analyzer with the parameters put in manually,
then the whole thing takes less then 10 seconds. I don't understand. Has anyone run into something similar?
Am I doing somethign wrong? What can I do to speed it up.
I tried setting the value to true for sp_serveroption for that particular linked server, but when I did that, it took over 1 minute to run.
This is so mind boggling. I've checked all the indexes, statstics and restarted both of the instances and still not sure what is going on.
Any one know what i can do to resolve this issue?
View 1 Replies
View Related
May 30, 2013
I am trying to call a DB2 procedure in SQl server through a linked server object. I use the IBMDADB2 provider for the linked server. on the DB2 I have a simple procedure with 2 in and 1 out paramater. on DB2 it works no problem.but in SQL server I just cannot get it to work.
so my code:
DB2IBM is the name of the linked server.
declare @I_DIS smallint
declare @I_UID char(8)
declare @ID_TICK int
alternative 1:
Exec ('Call btp.GET_TICK(?,?,?)',@I_DIS, @I_UID, @ID_TICK OUTPUT) AT DB2IBM
alternative 2:
EXECUTE DB2IBM..BTP.GET_TICK 2,'19', @ID_TICK
in both cases I got the same error:
OLE DB provider "IBMDADB2.DB2COPY1" for linked server "DB2IBM" returned message " CLI0100E Wrong number of parameters. SQLSTATE=07001".
so how can I call this procedure?
View 5 Replies
View Related
Jan 12, 2007
For some reason, I run a stored procedure in Query Analyzer and it works fine. When I run the very same procedure in MS access by clicking on its link I have to run it twice. The first run gives me the message that the stored procedure ran correctly but returned no records. The second run gives me the correct number of records but I have to run it twice. I am running month-to-month data. The first run is Jan thru March. Jan and Feb have no records so I run three months on the first set. The ensuing runs are individual months from April onward. The output is correct but any ideas on why I have to do it twice in Access? I am a bit new to stored procedures but my supervisor assures me that it should be exactly the same.
ddave
View 2 Replies
View Related
Jul 13, 2004
As part of a nightly process, I must call a stored procedure that uses cursors to update a Sybase linked server from SQL Server. The stored proc was written by someone else and is intended to interface to a finance system to upload new transactions.
The stored proc works fine most of the time but occasionally dies part-way through with the following confusing error message:
[OLE/DB provider returned message: Internally generated command failed to affect a row.]
OLE DB error trace [OLE/DB Provider 'Sybase.ASEOLEDBProvider' IRowsetChange::SetData returned 0x80004005: ].
Msg 7399, Level 16, State 1, Server ********, Procedure ********, Line 162
OLE DB provider 'Sybase.ASEOLEDBProvider' reported an error.
I initially ran this stored proc from a perl script via an ODBC link but in the futile hope of fixing this problem I tried manually executing it via isql.exe instead. Both return exactly the same error. I have also increased the OLE/DB query timeout to 15 minutes with no success in stopping the problem.
There seems to be no connection I can spot between when it succeeds and when it fails. When scheduled to run just after midnight it fails about 30% of the time (at a time when there should be a light load on the servers). When run manually it almost always suceeds (I have only managed to get it to fail through running manually once in dozens of attempts).
I can't seem to find anything relevant about this error via Google or any of my usual reference sources so hoped someone else might have a clue as to what the hell's going on. :confused:
The stored procedure uses a cursor to traverse a SELECT statement then performs several INSERTs, UPDATEs and DELETEs depending upon each row processed and attempts (but usually fails) to perform a ROLLBACK upon an error.
I'd appreciate any pointers in the right direction here. Is it because I'm performing cursor-based operations on a linked server? Is it due to the linked server being a Sybase server? Could it be due to locking problems or timeouts? Is my server in a bad mood and simply trying to taunt me? I'm tearing my hair out trying to find more information on this annoyingly intermittent problem and really appreciate any help or tales of similar errors.
Thanks in advance
View 11 Replies
View Related
Oct 27, 2007
Hi Sir,
I want to call one linked server stored procedure from another stored procedure.
--BATCH FOR LINKED SERVER SETUP
SET @IBatchNum = 2
EXEC PR_Linked_Server
@VServer = 'Linked_Amisys'
,@VSrvProduct = ''
,@VProvider = 'SQLOLEDB'
,@VDataSrc = 'DTCORPMXDV9'
,@VCatalog = 'pubs'
,@VCurrentUsr = 'CORPajohri'
,@VServerUsr = 'dba'
,@VServerPwd = 'dba'
END TRY
The linked server was not created When I executed the query. However, I was able to create the linked server when I executed this query(batch 2) alone.
Is there any limitation of SP which I am not aware of?
View 1 Replies
View Related
Jul 20, 2005
When I create a stored procedure like the one below and save it,everything seems fine. But when I close Enterprise Manager andre-open it, the stored procedure is gone.Any ideas?SET ANSI_DEFAULTS ONGOCREATE PROCEDURE [dbo].[sp_Test] ASSELECT * FROM OPENQUERY(LINKEDSERVER, 'SELECT V.VENDOR_ID,V.VENDOR_NAME FROM VENDOR V')GOTed
View 2 Replies
View Related
Jun 29, 2004
I would like to capture any errors thrown by linked server in my stored procedure, How do I do this? eg: Select statement in sp to remote server fails if login credentials were changed for some reason on remote server. @@error is not able to capture this error and stored procedure is terminated when this type of error occurs.
View 1 Replies
View Related
Sep 11, 2014
We have a stored procedure that makes a decision to pull records from one of two servers.
If one of these servers became unavailable but was no longer queried would the stored procedure still work? Doesn't SQL recompile stored procedures periodically?
Something like this:
If @ServerAIsDown=1
begin
select * from ServerB.dbo.MyTable
end
else
begin
select * from ServerA.dbo.MyTable
end
View 2 Replies
View Related
Mar 27, 2007
what pro's cons would there be to having a linked server run a local stored proc against another sql server or create that stored proc on that other sql server and call it from there in the c# code.
i would think that calling the stored proc would be more efficient that running a linked server - but please let me know your thoughts. I'm not sure i can have permission to add a stored proc on that server, so possibly the linked server is the only solution - but if i can put a stored proc on that server should i?
thanks.
Jeff
View 4 Replies
View Related
Jan 7, 2004
Hello,
I have created a MS Exchange 2000 link server in my MS SQL Server 2k. I have created a stored procedure (and a view...) using info from that linked server. When I am logged on the server as the Administrator, I can call my stored proc without any problems. When I use another computer (and I am not logged as the admin of the server) and I call the stored procedure, the following error is always raised :
Server: Msg 7302, Level 16, State 1, Procedure test_proc, Line 3
" Impossible de crer une instance du fournisseur OLE DB 'exoledb.DataSource.1'. "
<== I know it is a french error but it can be translated as : "Unable to instancied the OLE DB 'exoledb.DataSource.1' provider"
I would like to know if I can make run my stored proc in the admin account or what should I do to make it work
View 1 Replies
View Related
Feb 12, 2007
Hello there,
I have a scenario where I need a few stored procs to auto-execute on an hourly basis so I thought it would be nicely done in a maintenance plan job list. I have experience with this in sql 2000 but I am struggling with sql 2005.
I have been struggling with my maintenance plan to successfully run the 2 jobs that it has to complete:
1) execute a stored proc that creates/updates a client in the Client table on the local server
(This step works fine without hassles)
2) execute a stored proc that synchronizes this entry with a database on another server. This stored proc works fine outside the maintenance plan, but inside the maintenance plan job it gives me an error :
Executed as user: NT AUTHORITYSYSTEM. Cannot roll back T1. No transaction or savepoint of that name was found. [SQLSTATE 25000] (Error 6401)
I have tried looking on the net and forum to see whether i can solve this but i am stuck. What do I have to keep in mind executing this stored proc as a maintenance plan? What am i missing.
Thanks for any advice
Mike
View 3 Replies
View Related
Nov 3, 2005
I am using sql 2005 beta
View 23 Replies
View Related
May 4, 2007
Hi
I have created a linked server from SQL Server 2005 (SP 1) to SQL Service 2000 (SP 4) with a sql server login that is available on both servers but with different passwords and permissions.
I am getting the following error while accessing the linked server in management studio based on the scenario given below ;
------ Error Message Starts
OLE DB provider "SQLNCLI" for linked server "(SQL Server 2000 instance name)" returned message "Communication link failure".
Msg 10054, Level 16, State 1, Line 0
TCP Provider: An existing connection was forcibly closed by the remote host.
Msg 18456, Level 14, State 1, Line 0
Login failed for user 'abc'.
------ Error Message Ends
Consider login name is abc.
Now this login abc has sysadmin rights on sql server 2005.
The same login abc has only db_datareader rights on sql server 2000 on just one database and is not associated with any fixed server role.
I have configured the linked server using the following options;
1. I have tried impersonating login from SQL Server 2005 to SQL Server 2000 .
2. I have also tried specifying remote login / password option.
Anyone having any idea, would be of great help.
Regards,
Salman Shehbaz.
View 3 Replies
View Related
Jul 22, 2007
i did "Linked server" between To Servers , and it's Working.
---------------------------
For Example :
Server 1 =S1.
Server = S2.
i create table in S1 : name = TblS1
i create same table in S2 : name TblS2
and i create trigger(name tr_cpD) From S1 in TblS1 For send data To TblS2 in S2
/****************** trigger Code ***************
CREATE TRIGGER dbo.tr_cpD
ON dbo.TblS1
AFTER INSERT
AS
BEGIN
SET NOCOUNT ON;
insert into [S2].[dbname].[dbo].[TblS2] Select ID,Name from insertedEND
**************************************************
result is :
Msg 7399, Level 16, State 1, Procedure tr_cpD, Line 14
The OLE DB provider "SQLNCLI" for linked server "S2" reported an error. The provider did not give any information about the error.
Msg 7312, Level 16, State 1, Procedure tr_cpD, Line 14
Invalid use of schema or catalog for OLE DB provider "SQLNCLI" for linked server "S2". A four-part name was supplied, but the provider does not expose the necessary interfaces to use a catalog or schema.
how i can execute this trigger
View 5 Replies
View Related
Apr 18, 2007
Can I connect from a SQL Server 2005 database to a SQL Server 2000 database, without establishing a linked server connection.
I need to fire a SELECT query on a SQL Server 2000 database, but don't want to add it as a linked server. Is there any way I can do this or its not possible??
View 1 Replies
View Related
Dec 28, 2005
I have a Sybase Adaptive Server Enterprise server which I need to set up as a linked server in SQL Server 2005. The Sybase server is version 12.5.2, and the Sybase ODBC driver version is 4.20.00.67. I have already installed the Sybase client software on the server.
I also created a SystemDSN on the SQL Server to connect to the Sybase server. I tested the connection and it was able to connect.
I ran the following code to create the linked server:
<code>
EXEC master.dbo.sp_addlinkedserver @server = N'LinkedServerName', @srvproduct=N'Sybase', @provider=N'MSDASQL', @datasrc=N'Sybase System DSN', @provstr=N'"Provider=Sybase.ASEOLEDBProvider;Server Name=servername,5000;Initial Catalog=databasename;User Id=username;Password=password"'
</code>
I then ran sp_tables_ex to make sure I could view the tables in the Sybase database. Here is the error message I get:
<code>
OLE DB provider "MSDASQL" for linked server "LinkedServerName" returned message "[DataDirect][ODBC Sybase Wire Protocol driver]Error parsing connect string at offset 13. ".
Msg 7303, Level 16, State 1, Procedure sp_tables_ex, Line 41
Cannot initialize the data source object of OLE DB provider "MSDASQL" for linked server "LinkedServerName".
</code>
Any ideas what is happening here?
View 10 Replies
View Related
Aug 28, 2014
I was trying to figure out what the OPENQUERY Syntax is to Insert into SQL Server Table from Oracle Linked Server.
View 7 Replies
View Related
Sep 11, 2015
We have oracle linked server created on one of the sql server 2008 standard , we are fetching data from oracle and updating some records in sql server . Previously its working fine but we are suddenly facing below issue.
Below error occurred during process .
OLE DB provider "OraOLEDB.Oracle" for linked server "<linkedservername>" returned message "".
Msg 7346, Level 16, State 2, Line 1
Cannot get the data of the row from the OLE DB provider "OraOLEDB.Oracle" for linked server "<linked server name>".
View 7 Replies
View Related
Aug 30, 2006
I'm trying to link SQL Server 2000 sp3 to SQL 2005 64 bit. I keep getting Error 17 sql server does not exist or access denined. I tried adding remote user mapping and chaning the linked server properties to "Be made using this security context" without any success.
Any help is appreciated.
View 4 Replies
View Related
Aug 27, 2007
I receive the following error message when I run a distributed query against a loopback linked server in SQL Server 2005:
The Microsoft Distributed Transaction Coordinator (MS DTC) has cancelled the distributed transaction.
To resolve this problem, I was told that running a distributed query against a loopback linked server is not supported in SQL Server 2005. And I am suggested to use a remote server definition (sp_addserver) instead of a linked server definition to resolve this problem. (Although this is only a temporary resolution, which will deprecate in Katmai)
However, I run into another problem when I use the remote server definition. I receive the following error message:
Msg 18483, Level 14, State 1, Line 1
Could not connect to server 'ServerNameSQL2005' because '' is not defined as a remote login at the server. Verify that you have specified the correct login name.
Could anyone please help me out?
(I include the reproduce steps for the first error message, followed by my resolution that generates the second error message)
======
Reproduce steps for the first error message
======
On the ComputerAInstanceA instance, run the following statement to create a database and a table:
CREATE DATABASE DatabaseA
GO
USE DatabaseA
GO
CREATE TABLE TestTable(Col1 int, Col2 varchar(50))
GO
INSERT INTO TestTable VALUES (1, 'Hello World')
GO
On the ComputerBInstanceB instance, run the following statement to create a database and a table:
CREATE DATABASE DatabaseB
GO
USE DatabaseB
GO
CREATE TABLE TestTable (Col1 int, Col2 varchar(50))
GO
On the ComputerAInstanceA instance, create a linked server that links to the ComputerBInstanceB instance. Assume the name of the linked server is LNK_ServerB.
On the ComputerBInstanceB instance, create a linked server that links to the ComputerAInstanceA instance. Assume the name of the linked server is LNK_ServerA.
On the ComputerBInstanceB instance, run the following statement:
USE DatabaseB
GO
CREATE PROCEDURE InsertA AS
BEGIN
SELECT * from LNK_ServerA.DatabaseA.dbo.TestTable
END
GO
On the ComputerAInstanceA instance, run the following statement:
USE DatabaseA
GO
INSERT INTO TestTable
EXEC LNK_ServerB.DatabaseB.dbo.InsertA
GO
Then I receive the first error message.
=======
My resolution that generates the second error message
=======
On the ComputerBInstanceB instance, run the following statement:
sp_addserver 'ComputerAInstanceA'
GO
sp_serveroption 'ComputerAInstanceA', 'Data Access', 'TRUE'
GO
USE DatabaseB
GO
CREATE PROCEDURE InsertA AS
BEGIN
SELECT * FROM [ComputerAInstanceA].DatabaseA.dbo.TestTable
END
GO
On the ComputerAInstanceA instance, run the following statement:
USE DatabaseA
GO
INSERT INTO TestTable
EXECUTE [ComputerBInstanceB].[DatabaseB].[dbo].[InsertA]
GO
Then I receive the second error message.
View 1 Replies
View Related
Feb 23, 2015
I have the linked server connection created and works perfectly well. I mean I am able to see the tables while I am on my database.
how do I write a SQL statement to reference the linked server ?
I tried the following:
Select top 100 * from casmpogdbspr1.MPOG_Collations.dbo.AsaClass_Cleaned
Then I get the error message....
Msg 7314, Level 16, State 1, Line 1
The OLE DB provider "SQLNCLI10" for linked server "casmpogdbspr1" does not contain the table ""MPOG_Collations"."dbo"."AsaClass_Cleaned"". The table either does not exist or the current user does not have permissions on that table.
View 2 Replies
View Related
Apr 16, 2015
Using a 32-Bit SQL Server 2008 Express on my LOCAL PC. I downloaded the Advantage 8.1 OLE DB Provider and created a linked server to a REMOTE Advantage 8.1 database server. There is no data dictionary on the Advantage server.
Here is my linked server:
EXEC master.dbo.sp_addlinkedserver @server = N'1xx.1xx.xx.1xx', @srvproduct=N'Advantage', @provider=N'Advantage OLE DB Provider', @datasrc=N'1xx.1xx.xx.1xxeccET', @provstr=N'servertype=ads_local_server;tabletype=ads_cdx;'--tabletype=’ADS_ADT’ (this test works too)
EXEC master.dbo.sp_addlinkedsrvlogin @rmtsrvname=N'1xx.1xx.xx.1xx',@useself=N'False',@locallogin=Null,@rmtuser='adssys',@rmtpassword=Null
Testing the link succeeds with above. Using “ads_REMOTE_server” instead of “ads_local_server” and the test fails. Here is my problem, using the following queries will not work. Perhaps it’s a permissions issue? When I specify my local credentials for the remote server in the linked server it still does not work.
SELECT * FROM OPENQUERY([1xx.1xx.xx.1xx], 'SELECT * FROM ActType')
OLE DB provider "Advantage OLE DB Provider" for linked server "1xx.1xx.xx.1xx" returned message "Error 7200: AQE Error: State = HY000; NativeError = 5004; [Extended Systems][Advantage SQL][ASA] Error 5004: Either ACE could not find the specified file, or you do not have sufficient rights to access the file. Table name: ActType SELECT * FROM ActType".
Msg 7321, Level 16, State 2, Line 2
An error occurred while preparing the query "SELECT * FROM ActType" for execution against OLE DB provider "Advantage OLE DB Provider" for linked server "1xx.1xx.xx.1xx".
View 0 Replies
View Related
Sep 4, 2015
A recent SharePoint upgrade has rendered several views obsolete. I am redefining them so that our upper level executive reports show valid data.(yes, I know that doing anything to sharepoint could cause MS to deny support, having said that, this is something I've inherited and need to fix, pronto) The old view was created like so:
USE [AHMC]
GO
/****** Object: View [dbo].[vwSurgicalVolumes] Script Date: 09/04/2015 09:28:03 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE VIEW [dbo].[vwSurgicalVolumes] AS
SELECT
[code]....
As I said, this view is used in a report showing surgical minutes.SharePoint is now on a new server, which is linked differently (distributed?) I've used OPENQUERY to get my 'new' query to work;
SELECT *
FROM OPENQUERY ([PORTALWEBDB], 'SELECT
--AllLists
AL.tp_ID AS ALtpID
,AL.tp_WebID as altpwebid
,AL.tp_Title AS ALTitle
[code]....
My data (ie surgical minutes, etc) seems to be in the XML column, AUD.tp_ColumnSet . So I need to parse it out and convert it to INT to maintain consistency with the previous view. How do I do this within the context of the view definition?Here is a representation of the new and old view data copied to excel :
<datetime1>2014-08-14T04:00:00</datetime1><float1>2.000000000000000e+000</float1><float2>4.190000000000000e+002</float2><float3>1.600000000000000e+001</float3><float4>8.110000000000000e+002</float4><sql_variant1 xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:sqltypes="http://schemas.microsoft.com/sqlserver/2004/sqltypes"
[Code] ....
can't format it to make it look decent. InHouseCases =2, InHouseMinutes=419, OutPatientCases =16, OutPatientMinutes=1230. This corresponds to the new data I can see in the XML column; 2.000000000000000e+000 is indeed 2 and 4.190000000000000e_002 is indeed 419.
View 4 Replies
View Related
Oct 4, 2007
I have an Excel sheet that is dynamically updated (through DDE) and I want to import this data to a table in SQL Server 2005. Using SQL Server Management Studio to configure an Excel data source as a linked server.
(http://support.microsoft.com/kb/306397/EN-US/)
Following the first 5 steps should let me acces the table (but I cannot view the data in SQL Server 2005). However, I could not find how to export the data into an existing table. Does anyone know how or can give a pointer to document describing how to do this?
View 8 Replies
View Related
