We are having a problem with trying to backup the database device and log DAT files located in the MSSQLData directory.
The Seagate Backup Exec. states that the files are busy and skips them during its backup cycle. It skips all the devices in the
directory.
Any suggestions?
Does anyone want to give me a few glowing reviews for me to show my bosses? I would like to recommend this product, but the only place I am finding info (such as reviews)is tha seagate site, which may be more than a little biased.
View 3 Replies View RelatedHas anyone had any problems with Seagate Backup Exec and MS SQL Server? We have been having server "lockups" occur when the Seagate Backup
Exec does it's DBCC CheckDB before it backs up the databases. The server starts repeating "lazywriter" errors which take up all the server resources
to where we have to "reboot" the server to recover. Apparently this is a known problem (per Microsoft Tech. Support). Has anyone else experienced
this problem? and if so, how did you get around it or repair it?
Jim
Any thoughts or experiences (good or bad) on using the SQL agents from Arcserve or BackupExec for backups as opposed to standard dumps to disk?
I have always used dumps and taken the position that these tools work well, reliably and do not depend on another device ( tape device) for backups. Also they should be quicker and not cause any problem with table / log concurrency or delays in updates while the backup takes place.
Also, does anyone know how these products actualy maintain concurrency? Has anyone ever used one of these backups as a recovery?
Thanks in advance.
I've an emergency requirement to copy Source server database backup files to destination Server through xcopy command. Backup job on source server runs daily, so once this job get completes all databases backups needs to be moved to destination server. But here the main concern is "the backup files on destination server shouldn't be overwritten, they should be placed separately as Source server job runs daily".
We've a command which overwrites backups on destination server. But we need to keep backups on destination at-least for 4 weeks (means : retention should be 4 Weeks).
Hello,
We're new users of SQL Server 2005. I created two maintenance plans...one to backup the database at 2 AM daily and one to back up transaction logs every 30 minutes. These maintenance plans write to a local disk. What we want to do, within the maintenance plan, is copy the files as soon as they are written to a remote server. Is that possible?
Thanks in advance.
Having a problem with my backup database.
Tonight I got this error:
Msg 8921, Level 16, State 1, Line 3
Check terminated. A failure was detected while collecting facts. Possibly tempdb out of space or a system table is inconsistent. Check previous errors.
Msg 824, Level 24, State 2, Line 3
SQL Server detected a logical consistency-based I/O error: torn page (expected signature: 0x55555555; actual signature: 0x55555545). It occurred during a read of page (1:934) in database ID 12 at offset 0x0000000074c000 in file 'E:SomefolderSomedatabase.mdf'. Additional messages in the SQL Server error log or system event log may provide more detail. This is a severe error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online.
Tried to restore from my local .bak file and it was giving me the same error and since I cant get my database back online I cant run the restore from tape. I did some online research and found this command:
EXEC sp_resetstatus 'BEDB';
ALTER DATABASE BEDB SET EMERGENCY
DBCC checkdb('BEDB')
ALTER DATABASE BEDB SET SINGLE_USER WITH ROLLBACK IMMEDIATE
DBCC CheckDB ('BEDB', REPAIR_ALLOW_DATA_LOSS)
ALTER DATABASE BEDB SET MULTI_USER
Didnt correct the problem and produced the same error above.
This has happened once before and I rebuit the entire backup server. That seems to not "fix" the problem because it has happened again. Does anyone have a suggestion. Keep in mind that the storage for the database is on iSCSI if that means anything but I have 11 other databases (including a BES Database) that never have any issues.
OS: Windows 2003 Server Standard Edition R2 SP2
SQL: SQL 2005 Enterprise Edition SP2
Hi,I have(had) an old Win2k Server server with about 30 web site databases(SQL 2000) that just went under due to hardware problems. Thankfully, Ihave backups of all the databases plus the MDF and LDF files from thehard drive.I want to move all of these sites and their data to a newer server(Win2003) running SQL2000.What's the best way to copy the database from the old server hard drive(now mounted as an extrnal drive to a local machine; I'm currentlyFTPing all of the web site directories from it to the new server)?Just upload the original data to the new server and then mount the MDFand LDF files within the new SQL server? Or do I restore the backupfiles in the new SQL2000?All of my previous data migrations have been DTS operations from onelive server to another, so no experience with either of the abovescenarios. I'll certainly have a lot more experience at one of them bythe time this weekend is through.Thanks for any help you can offer.
View 1 Replies View RelatedHello,
i would like to copy the SQL Server Express database .mdf and .ldf files for backup. Is this ok?
Autoclose = true and recovery model = simple.
Must i detach the database before copy the 2 files or can i copy the 2 files without detach at any time? When connections are open (also remote connections).
Can i copy at any time even when transactions are active?
I would like to write a copy programm which copies the 2 files every 30 minuutes. Only 30 minutes of work could be lost.
This would be enough for me and i don't have to care for the the BACKUP and RESTORE stuff. In the past i used BACKUP and when i needed this BACKUP it did not run. Returns some error message..
Is copy ok? When is it possible? At any time or must all transactions be comitted? Must all connections (remotes too) be closed? Must the database be detached?
Is this enough to have a valid backup? Backup would be an attach of the .mdf file.
Or must i use the BACKUP and RESTORE stuff? Why?
If so, for what reason is the AUTO CLOSE property there?
Regards,
Markus
I need to import multiple csv files and load into table and everytime new database has to be created .
I was able to create new databases using stored proc
How do i do a bulk insert for all the files at once to insert into tables .
i want to load all the files at once .
HiWhat is the easiest option for Exporting ALL of my SQL Server tables into a CSV file (either separate CSV files for each table or one big file with all the table columns and data) ???I just want to Backup my SQL Server database like we backup MySQL database using phpMyAdmin. Unfortunately, my SQL hosting company does not allow backups for free.Thanks for help
View 1 Replies View RelatedHi,
I am developing a tool that takes snapshot of a particular database.
By snapshot I mean, attaching the .LDF & .MDF files.
Would you please let me know how to access these files & take a backup of the same.
And also how to restore them back. (using c# programming)
Thanks,
Archana A.A.
I am but a lowly DBA unworthy of this task...
I have a large (200+ GB) database with many (100+) files. Please don't ask me why I did it this way; I inherited this database -- really, it wasn't my idea.
My predecessor also seemd to think that backups were unnecessary; there have been no backups of this database -- ever.
While we cast about for a good long term solution, I am trying various short-term options. One I want to explore is to back the database up in chunks -- ie, by backing up individual files. I created a test database with five files (there is only one filegroup on the production server). Here is the DDL:
-- =============================================
-- Create database on mulitple file groups
-- =============================================
IF EXISTS (SELECT *
FROM master..sysdatabases
WHERE name = N'MultiFile')
DROP DATABASE MultiFile
GO
CREATE DATABASE MultiFile
ON PRIMARY
( NAME = MultiFile,
FILENAME = N'e:MSSQLDataMultiFile.mdf',
SIZE = 1MB,
MAXSIZE = 10MB,
FILEGROWTH = 10%),
( NAME = MultiFile2,
FILENAME = N'e:MSSQLDataMultiFile2.ndf',
SIZE = 1MB,
MAXSIZE = 10MB,
FILEGROWTH = 10%),
( NAME = MultiFile3,
FILENAME = N'e:MSSQLDataMultiFile3.ndf',
SIZE = 1MB,
MAXSIZE = 10MB,
FILEGROWTH = 10%),
( NAME = MultiFile4,
FILENAME = N'e:MSSQLDataMultiFile4.ndf',
SIZE = 1MB,
MAXSIZE = 10MB,
FILEGROWTH = 10%),
( NAME = MultiFile5,
FILENAME = N'e:MSSQLDataMultiFile5.ndf',
SIZE = 1MB,
MAXSIZE = 10MB,
FILEGROWTH = 10%)
LOG ON
( NAME = MultiFile_Log,
FILENAME = N'e:MSSQLDataMultiFile_Log.ldf',
SIZE = 1MB,
MAXSIZE = 10MB,
FILEGROWTH = 10%)
GO
I have tried the following backup script:
BACKUP DATABASE MultiFile
FILE = 'MultiFile',
FILE = 'MultiFile2'
TO Backup01
WITH
INIT
BACKUP DATABASE MultiFile
FILE = 'MultiFile3',
FILE = 'MultiFile4'
TO Backup02
WITH
INIT
BACKUP DATABASE MultiFile
FILE = 'MultiFile5'
TO Backup03
WITH
INIT
And here is the restore script:
RESTORE DATABASE MultiFile2
FILE = 'MultiFile',
FILE = 'MultiFile2',
FILE = 'MultiFile3',
FILE = 'MultiFile4',
FILE = 'MultiFile5'
FROM Backup01, Backup02, Backup03
WITH MOVE 'MultiFile' TO 'E:MSSQLDataaMultfile.mdf',
MOVE 'MultiFile2' TO 'E:MSSQLDataaMultifile2.mdf',
MOVE 'MultiFile2' TO 'E:MSSQLDataaMultifile3.mdf',
MOVE 'MultiFile2' TO 'E:MSSQLDataaMultifile4.mdf',
MOVE 'MultiFile2' TO 'E:MSSQLDataaMultifile5.mdf',
MOVE 'MultiFile_log' TO 'E:MSSQLaMultFile_Log.ldf'
However, running the Restore script generates the following error:
Server: Msg 3259, Level 16, State 1, Line 1
The volume on device 'Backup02' is not part of a multiple family media set. BACKUP WITH FORMAT can be used to form a new media set.
Server: Msg 3013, Level 16, State 1, Line 1
RESTORE DATABASE is terminating abnormally.
I'm not sure what to make of this. What do I need to alter in either the backup script or the restore script to make this work?
I am trying this because my objectives are to:
1. Limit the amount of work that the server is performing during any one given backup session. The idea that I have is to backup the database in chunks using a rolling 3-5 day window.
2. The database must be up and operational 7x24x365 (except for one 4 hour window each month)
3. This is not the long-term solution; but I need something to tide us over until we can purchase additional storage capacity.
I appreciate any thoughts and or guidance you can provide.
Regards,
hmscott
I am using Bulk Copy command for Exporting data table wise from database to csv files and it was working fine. Since last 3-4 days when exporting for some tables data in csv file is coming junk.
View 1 Replies View RelatedWe have a pretty large SQL Server database, just shy of 400 GB. It is divided up into 24 different data files. The previous DBA here said it is faster to backup the backup individual data files to seperate files. So what he did was issue 6 backup statements like the one below as a step in an agent job.
BACKUP DATABASE MYDATABASE
FILE = 'Data',
FILE = 'data2',
FILE = 'data3',
FILE = 'data4'
TO Data1_4
WITH FORMAT
Next step:
BACKUP DATABASE MYDATABASE
FILE = 'data5',
FILE = 'data6',
FILE = 'data7',
FILE = 'data8'
TO Data5_8
WITH FORMAT
etc.. in sequence.
What I question is how this is faster than just issuing a backup for the whole database? Has anyone ever ran into this before?
- Eric
I am trying to backup the sql database files from a local computer to a server location through vb.net 2005. Is there a simple way to do this? Every time I try to detach the database, I cannot because the database is in use. Is there something I am missing with this?
Thanks
Im trying to recover my database using the mdf and ldf files.I dont have any backup and i have recovered two of the mdf files usinga tool which "discovers" deleted files after hard drive formatting...It sounds cool, isnt it...:? :(Obviously, i get a "suspect" message when the server starts and the logfile says this kind of things:·"Full PathName.MDF is not a primary database file." (This is one ofthe files repaired using the magic tool.·Error: 823, Severity: 24, State: 6·"I/O error (torn page) detected during read at offset0000000000000000 in file 'Full PathiName2.mdf'... Name2.mdf is thesecond file·Device activation error. The physical file name 'Full PathName2.mdf'may be incorrect.When i try to execute the command "DBCC CHECKDB ('Database_Name') WITHPHYSICAL_ONLY" i get the following message :·Could not open FCB for invalid file ID 0 in database 'Logs'.Do you have any ideas? Thank you very much...:D
View 2 Replies View Related
Hi!
I did:
alter database mydb set single_user with rollback immediate;
exec sp_detach_db @dbname='mydb', @keepfulltextindexfile='true';
then I tried to copy files to new location on other drives, same server but got
>>Cannot copy <myfile>: Access is denied
Make sure the disk is not full or write-protected and that the file is not currently in use<<
I also tried rename of file without success.
I also tried with db service stoppet (not preferred) without success.
How to find out, which process locks the files?
Best regards
To all,How to backup a database into a number of smaller files ?For example, can I can fully backup a DB of 10 MB into 10 files (each 1MB)???The problem I've met is that the DB backup file is too large, over 4GB, and even Winzip can't compress it (after compressing, around 80 %of compression rate is possible)Thanks![color=blue]>From Jason (Kusanagihk)[/color]
View 11 Replies View RelatedI have RAID 5 with 1 logical drive with 2 partitions with SQL Server 2000 running on SERVER.
what best model for data storage and backup would some experienced one suggest:
basically I want to put Master, Database files and T-Log files away from each other.
-- Data files
-- Log files
-- Master database.
Thanks,
Fahim.
How to move the database backup files (.bak) from one server to another server using ‘XP_CMDSHELL’
View 2 Replies View Related
Hello,
I am attempting to restore the database from within VB.NET application I am making the following 3 calls:
RESTORE FileListOnly FROM DISK = 'C:MyDatabase.dat'
USE Master RESTORE DATABASE MyDatabase FROM DISK = 'C:MyDatabase.dat' WITH NORECOVERY, MOVE 'MyDatabase' TO 'C:Program FilesMicrosoft SQL ServerMSSQLDataMyDatabase.mdf', MOVE 'MyDatabase_log' TO 'C:Program FilesMicrosoft SQL ServerMSSQLDataLDFMyDatabase.ldf', REPLACE
RESTORE DATABASE MyDatabase FROM DISK = 'C:MyDatabase.dat'
using SMO. This logic works fine with small *.dat files, however when using *.dat file of about 4Gb I get an error on the 3d restore database call:
ExecuteNonQuery failed for Database 'master'.
An exception occurred while executing a Transact-SQL statement or batch.
Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
Operator aborted backup or restore. See the error messages returned to the console for more details.
ExecuteNonQuery failed for Database 'master'.
An exception occurred while executing a Transact-SQL statement or batch.
Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
Operator aborted backup or restore. See the error messages returned to the console for more details.
The same program/logic also works fine when I use MS SQL 2005 and it runs fine from MS SQL 2005 Query Analyzer for both 2005 and 2000 databases. There seem to be only problem with MS SQL 2000 from within VB.NET. Anybody has any idea? I'd appreciate any response. Thanks
Eugene
I'm looking to schedule a maintenance plan for my databases which I have done.I'd like this database to be copied to another folder and the name altered to include the file name and the current date time stamp.Is this possible in the scheduled maintenance plan?
View 4 Replies View RelatedCan anyone tell me how to RESTORE a Table, not an entire Database, to the live server.
Please Help
I have the need to delete old backup files via TSQL job. Found this solution online:
PushD "
emoteservershareDIFF" &&(
forfiles -m *DIFF*.sqb -d -1 -c "cmd /c del /q @path"
) & PopD
It works remotely if I run it via command prompt. But when I add this to a TSQL job on my remote SQL instance, it runs without deleting anything. What I'm missing?
I've installed SQL Server 7.0 SP2 and Backup Exec 7.3.
When i try to start backup exec a dr. Watson error appears.
Backup exec doesn't start. The same effect with version 8.0 and 8.5 from Veritas Backup Exec. When i try to install MDAC 2.5 after installing Backup exec, error 90332 (?) appears. Backup exec "hangs".
When i've installed Backup exec 7.0 or 7.2 there are no problems.
(also with SQL Agent)
Does somebody know to reolve this?
Thanks! !
We've been experiencing some problems on some of our databases ever since we've updated our servers to SP5. Backup exec seems to hang up after reaching a small number of bytes and then goes no further. I've installed the new MDACS drivers but it hasn't solved the problem.
Any ideas would be greatly apreciated!
Thank you,
i know this topic has been covered and i've searched but i can't find the answer.
-SQL server is a diffrent server than my backup server
-i've installed the sql agent option on the backup exec server
-i've installed the client network utility on the remote server
the backup server doesn't see the SQL server databases. any thoughts
could it be a security issue?
thanks!
I need to backup a single DB with "Copy-only Backup" option on. I Want to place the backup on a different location, we have a media set which is used for daily backups. I want this backup placed on a different
server 192.168.250.xxx
DepartmentsITBackup2015xxx.bakÂ
I have added this location to "back up to" The old one is still there. I I then hit OK th backup hangs for 2-3 minutes and gives me an error which points to the old media set. SO I want to create a new media set and call it "onlyonce" but what I am not sure about is what this Means "back up to a new media set and erase all existing backup sets" Does that mean all old backups will be deleted?
I've written a custom script to delete backup files from location. But unable to modify now to count the number of files are deleted. How to modify the script...
/* Script to delete older than N days backup from a specific directory */
USE [db_admin]
GO
IF OBJECT_ID('usp_DeleteBackup', 'P') IS NOT NULL
DROP PROC usp_DeleteBackup
GO
[Code] .....
Has anyone else out there had problems restoring tape backups with Seagate. I believe we have the latest version (and even a CD bug fix which was overnighted to us), but we still can`t successfully restore. The process gets to about 34% and fails. We`re awaiting more info from Seagate`s Tech Support group; but are beginning to wonder seriously about this. What good is doing a backup if you can`t restore it when you need it?
Any wisdom is appreciated.
What backup software has everyone found to work best, particularly for SQL Server?
Currently we use a SQL maintenance plan to do a full backup of all our databases daily (about 40 databases on our production server). As you can imagine, this eats up disk space quickly so currently we manually zip the backup files and/or move them to an archive drive. I considered writing an application to walk through the backup folder structure and zip any .bak file it finds, but I know there are some third party tools out there that will backup/restore a MS SQL database.
I was wondering if any of these also zip the backups once they are created. Any recommendations or suggestions are welcome.
I scheduled automatic backup process but its only showing backup of the only one .sql file in the backup folder. Other created .sql files are not backed up. Why is it so?
View 5 Replies View Related