Search Parameter By Date
Oct 20, 2006
Hello guys I hope everyone is doing well I have a question. I have a database thats an ADP. on one of the forms I have a command button that has a stored procedure in it that will allow them to search by TM# or name or whatever, (I have the code below) I would like them to be able to do the samething but by date rather then TM# or Name, how would I go about doing that with a datetime datatype??
thank you
ALTER PROCEDURE dbo.Search_ActiveConditionals
(@Enter_TM# int)
AS SELECT TM#, LASTNAME, FIRSTNAME, CONDITIONAL, DATEOFCONDITIONAL, INVESTIGATOR_COND, REASONFORCOND
FROM dbo.ACTIVE_CONDITIONALS
WHERE (TM# = @Enter_TM#)
View 2 Replies
ADVERTISEMENT
Oct 15, 2007
Hi,
I have parameters in my report. The user can choose the year, month and date (3 parameters).
Now I want to set default vaules for the parameters , so that the user sees the report for example for the current day without selecting the parameters. I tried to set the type of the parameters to DateTime and the default value for example for the year to "=Today().Year" . But when I execute the report an error occures . Something like : no validValue for this parameter.
My Attributes for the year month and date are from an Analyis Services Cube from a Server Time dimension .
Does somebody know how to make it possible to set default values for this parameters?
Other question :
Does somebody know how I can reduce the values for a parameter. For Example I have a parameter "year" from a server time dimension from a cube. The values which are available are "Year 2004", "Year 2005", "Year 2006", "Year 2007".
But I want that the user only can choose "Year 2006" or "Year 2007" ant not every Year or "All".
Or Other Example: The User should only choose a Date that is int the past or Today but not a Date in the future.
Thanks !
JF
View 7 Replies
View Related
Jul 24, 2007
I am having report parameter end date I am showing the default value "5/21/2007 11:59:59 PM" in the end date paramter. And also I want to show date time format "(MM/DD/YYYY HH:MMS)" in the right hand side of the parameter. How to do this?
Thank You
View 1 Replies
View Related
Aug 11, 2013
Date parameter. I created a report that allows a drop down for a date range to be selected. However, whenever I preview the report, I get an error. I know my error stems from my date fields being in this format "201301" , and the "date/ time" in SSRS being mm/dd/yyyy on the drop down calendar in SSRS.
I know the direction I want to go in, but just a little confused on where would I use the convert or cast function. Would it be in the data parameter itself, or a part of the query before the @start date and @End date?
View 18 Replies
View Related
Nov 8, 2013
I'm working on a SQL report and am returning a list of values for a column/field, "STATUS", to be used as one of the search parameter.
SELECT DISTINCT STATUS FROM [table]
ORDER BY STATUS
Values returned are [blank], approved, onhold, etc.How can I get the [blank] value to be set as "All" within the report parameter for STATUS?
View 3 Replies
View Related
Nov 21, 2007
Hi,
I tried to create parameters in my report. I need one date picker. So i select data type as datetime. in default values i selected as non-queried and in date time functions i selected =Today. But am unable to set current date. Please help me to solve it.
Regards
Nataraj.C
View 2 Replies
View Related
Sep 3, 2007
I have a Full Text query that works fine when structured as follows:
SELECT First_Name, Middle_Name, Last_Name, Hire_Date, City, Department, Phone_Ext, title, Fax, Secretary_Name, Attorney_Name, Secy_Ext, Home_Phone, Desk_Location, Law_School, Undergraduate_School, Languages, E_mail, CMS_ID, WEB_ID, Notary
FROM dbo.PhotoDir
WHERE CONTAINS (*, 'Jones')
ORDER BY Last_Name, First_Name
However, I would like to replace "Jones" with a parameter, @LName for example. However, I can't figure out the syntax. I tried the following:
WHERE CONTAINS (*, @LName)
but received the following error:
The @LName SQL construct or statement is not supported.
Is there a way to put a parameter in this type of query?
Thanks in advance.
View 3 Replies
View Related
Dec 16, 1999
How can I use a parameter in a free text search. I would expect it to look like this:
-CREATE PROCEDURE searchProducts
-
-@worlist varchar(40)
-
-AS
-
-SELECT PRProductID, PRDescription FROM tbProducts WHERE CONTAINS
- (PRDescription, @wordlist)
but I get an error checking the syntax. I've tried all sorts of combinations of ' and ".
View 1 Replies
View Related
Jun 20, 2014
Say I have a query like
DECLARE @ID UNIQUEIDENTIFIER, @SOMEDATE DATE
SELECT * FROM myTable WHERE ID = @ID AND DATEFIELD=@SOMEDATE
I want to pass values to @ID and @SOMEDATE, such that it meets the WHERE criteria for all values in the respective fields.
What parameter value should I pass such that all values are selected? In the actual SP, I have uniqueidentifier, varchar and date parameters.
View 2 Replies
View Related
Sep 13, 2007
I have an issue trying to pass a search text parameter to FREETEXTTABLE via Dataset.
The following code works fine if you hardcode the search word/text as shown:
SELECT KEY_TBL.RANK, FT_TBL.FaqQuestion, FT_TBL.FaqAnswer, FT_TBL.SearchFROM faq_table AS FT_TBL INNER JOIN FREETEXTTABLE(faq_table, Search, 'cool') AS KEY_TBL ON FT_TBL.FaqID = KEY_TBL.[KEY]ORDER BY KEY_TBL.RANK DESC
Now, I want to do this:
SELECT KEY_TBL.RANK, FT_TBL.FaqQuestion, FT_TBL.FaqAnswer, FT_TBL.SearchFROM faq_table AS FT_TBL INNER JOIN FREETEXTTABLE(faq_table, Search, @Search) AS KEY_TBL ON FT_TBL.FaqID = KEY_TBL.[KEY]ORDER BY KEY_TBL.RANK DESC
The error I'm getting is @Search is not declared. How am I suppose to pass in a value?
I have searched almost everywhere and nobody seemed to ask this precise question. I'm sure this is a huge problem.
Can anyone help me please?
View 3 Replies
View Related
May 3, 2007
Hi guys, first post here. It's been a few years since I've worked with ODBC, so I'm a bit rusty. I'm having trouble figuring out how to use a char* string as a parameter for a SELECT statement. I'm trying to compare the contents of a varchar column (with size=20) against the string.
Here's the code that I'm using:
char* arg;
SQLINTEGER stringSize = 32;
retcode = SQLBindParameter(hstmt,
1,
SQL_PARAM_INPUT,
SQL_C_CHAR,
SQL_VARCHAR,
20,
0,
arg,
stringSize,
&stringSize);
retcode = SQLPrepare(hstmt,
(SQLCHAR*) "SELECT * "
"FROM myTable "
"WHERE (stringColumn = '?')",
SQL_NTS);
retcode = SQLExecute(hstmt);
retcode = SQLFetch(hstmt);
When SQLFetch() runs, it returns 100 (SQL_NO_DATA). If I type the query manually into my Enterprise Manager console, I get several results, so I know the query is correct. Any idea what I might be doing wrong with the ODBC calls?
Thanks!
View 1 Replies
View Related
Jan 24, 2008
Hello,
I am using the calender parameter and I need to convert my data date format to the one that matched that is returned on selecting a date from this calender. Can you show me what this format is.
how can I convert my existing date format to this format. The existing date format is 2007-07-26 21:27:13.000
thank you
Kiran
View 5 Replies
View Related
Jul 23, 2015
I am working into a t-sql where i need to expand the date within a date parameter. For example:
Start Date = '1/1/2014'
End Date = '12/31/2014'
I want to expand this as:
01/2014
02/2014
03/2014
04/2014
05/2014
06/2014
up to
12/2014
View 4 Replies
View Related
Jan 1, 2014
I am new for SQL SP, I have three table,
Table 1 - Merchant
MerchantID MerchantName Zip
1 Merchant1 1001
2 Merchant2 1002
3 Merchant3 1003
4 Merchant4 1004
Table 2 - Region
RegionID RegionName
1 Region1
2 Region2
3 Region3
Table 3 - Offer
OfferID RegionID MerchantID
1 1 3
2 1 2
3 1 1
4 2 2
5 2 4
I have two input parameter for this SP, @MerchantName = NULL and @RegionName = NULL
Expected Result Table
If input parameter @MerchantName = NULL and @RegionName = NULL
MerchantID MerchantName Zip
1 Merchant1 1001
2 Merchant2 1002
3 Merchant3 1003
4 Merchant4 1004
If we Search by RegionName="Region1" Ex: @MerchantName = NULL and @RegionName = 'Region1'
MerchantID MerchantName Zip
1 Merchant1 1001
2 Merchant2 1002
3 Merchant3 1003
If we Search by RegionName="Region2" Ex: @MerchantName = NULL and @RegionName = 'Region2'
MerchantID MerchantName Zip
2 Merchant2 1002
4 Merchant4 1004
If we search by MerchantName='Merchant1' Ex: @MerchantName = 'Merchant1' and @RegionName = ''
MerchantID MerchantName Zip
1 Merchant1 1001
How to get the expected result for the above scenario.
View 3 Replies
View Related
Jan 6, 2005
when i use enterprise manager, I type the following code to retrieve the date, can you check ?
SELECT *
FROM Table
WHERE (ExpirationDate BETWEEN 11 / 1 / 2004 AND 2 / 1 / 2005)
Thanks.
View 5 Replies
View Related
Nov 10, 2007
Hi, Could you tell me if this is possible? How do I return results using an entire column as part of the search parameter? I need to do this in the sql rather than selecting the contents and iterating through it as it would take too long.
eg.
CREATE TABLE [dbo].[tPopupKeywords](
[id] [int] IDENTITY(1,1) NOT FOR REPLICATION NOT NULL,
[title] [nvarchar](255) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL,
[description] [nvarchar](2000) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL
) ON [PRIMARY]
INSERT INTO dbo.tPopupKeywords(title, description)
SELECT 'check', 'desc' UNION ALL
SELECT 'for', 'desc' UNION ALL
SELECT 'keywords', 'desc'
select dbo.tpopupkeywords.title
where 'This is an example of a passed in string to check if any keywords are returned.'
LIKE '% ' + dbo.tpopupkeywords.title + ' %' --Does this bit need to do a select??
expected results.....:
check
keywords
View 1 Replies
View Related
Apr 21, 2008
Hi there,
I have a problem with multi-value parameter in ReportingServices2005, hope to find a solution here.
if I use ordinary parameter in a report(multi-value checkbox is not selected), after deployment I can click on drop down list and type possible value of that parameter using keyboard(it will be selected from what i typed).
if I use multi-value parameter somewhy it doesn't respond to anything i type from my keyboard.
Why is that?
What should i do to make that multi-value parameter select possible result from what i type?
View 4 Replies
View Related
Oct 24, 2006
I thought this would be quite simple but can't find the correct syntax:ALTER Procedure usp_Product_Search_Artist_ProductTitle
(@ProductTitle varchar(255))
AS
SELECT ProductTitle
FROM tbl_Product
WHERE CONTAINS(dbo.tbl_Product.ProductTitle, @ProductTitle)
My problem is that if I pass "LCD Flat Screen" as teh @ProductTitle parameter the query falls over as it contains spaces. Guess i'm looking for something like: WHERE CONTAINS(dbo.tbl_Product.ProductTitle, '"' + @ProductTitle + "'")Thanks in advance.R
View 4 Replies
View Related
Sep 27, 2006
Hi,I have a application that I’m trying to do a search in a SQL database with a dateI can add, update or delete the date but when I do a search it doesn’t work. I did a store procedure to do the search and its working but it’s only working when I pass the parameter between quote like that ‘09/15/2006’ if I remove the quote it doesn’t work How do I configure my store procedure to automatically put the quote?OrHow do I configure my vb.net code to automatically add the quote? Thanks in advance Soft
View 6 Replies
View Related
Mar 5, 2008
Hi guys,
Am developing an application where I store the date in the database. I would like to search the date from the database table. Can anyone tell me how would the search string would look like?
The current string am using is: select Pid "ID", PName "Name", Address, DateOfBirth "Date Of Birth", Phone, emergencyContact "Emergency Contact", RegistrationDate "Registration Date", DischargeDate "Discharge Date" from patient_177681 Where RegistrationDate Like '%2005-3-4%'
But this string does not return any results and so does any other data in the Like % % string. Can anyone let me know how to compare two dates and return a result? Is there any in-built function to do this?
View 2 Replies
View Related
Mar 28, 2008
hello I have this code Select Waste.WasteName AS [Waste Name], InvoiceDetail.Volume, Branch.BranchLocation AS [Branch Location] From InvoiceHeader INNER JOIN InvoiceDetail ON InvoiceHeader.InvoiceNo = InvoiceDetail.InvoiceNo INNER JOIN Waste ON InvoiceDetail.WasteID = Waste.WasteID INNER JOIN Branch ON InvoiceDetail.BranchID = Branch.BranchID Where WasteName = 'Sludge' AND InvoiceDate >= '" + TextBox1.Text + "' AND InvoiceDate <= '" + TextBox2.Text + "'; The problem is everytime I will search for example InvoiceDate 03/27/2008, I need to add one day for example --> 03/28/2008 for me to be able to get that Invoicedate 03/27/2008.. What's do you think is the problem with my code? Thanks!
View 9 Replies
View Related
Jul 3, 2007
hi
i am using a calendar control. the format is mm-dd-yyyy
my table stores date in the following format-
mm/dd/yyyy hh:mm:ss
my search is based only on date(not time). how can i do it?
thanks
Jaimin
View 4 Replies
View Related
May 18, 2007
Dear all
I am pretty new to SQL server 2005 and have the following issue:
I get the date from the asp applciation in format dd/mm/yyyy and then try to do a search for all records that might match that date in sql server 2005. The date is storred in ther database in datetime format.
I am having trouble composing the stored procedure to do that.
Any help would be apreciated.
Sincerely
d
View 2 Replies
View Related
Oct 22, 2007
I am trying to search for stored files "for example from date: 15/12/2003 to: 24/6/2006" and when i press search no results appeare the following is the database code:
1 public DataTable searchData(string fileNo, string Title, string dFrom, string dTo, string brief)2 {3 string str = "";4 5 str = "select * from Tb_File where Active = 1 ";6 7 if (fileNo != "")8 str += " and FileNo='" + fileNo + "'";9 if (Title != "")10 str += " and Title like '%" + Title + "%' ";11 if (brief != "")12 str += " and Brief like '%" + brief + "%' ";13 if (dFrom != "")14 str += " and DFrom >= convert(datetime,'" + Convert.ToDateTime(dFrom).ToShortDateString() + "',103) ";15 if (dTo != "")16 str += " and DTo < convert(datetime,'" + Convert.ToDateTime(dTo).ToShortDateString() + "',103) ";17 18 ole.Open();19 SqlDataAdapter DA = new SqlDataAdapter(str, ole);20 DataTable DT = new DataTable();21 DA.Fill(DT);22 ole.Close();23 return DT;24 25 }
i am using sql 2000, with Visual Studio 2005.
View 14 Replies
View Related
Oct 27, 2000
Hi,
The following is a VB code which I use it to check the existence of the record before I insert a new record
into my SQL 7.0 database. When I run the vb code, I got an error which is
"-2147217913 [Microsoft][ODBC SQL Server Driver][SQL Server]The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value." I couldn't figure out what's wrong with my code especially the WHERE clause.
Please help me look into this problem. TQ.
Private Sub AddDate()
Dim rstDate As ADODB.Recordset
Dim myDate As Date
Dim Criteria As String
myFileDate=#27-10-2000 16:00#
myDate = Format(myFileDate, "mm-dd-yyyy")
Criteria = "SELECT Date " _
& "FROM DateGen " _
& "WHERE Date = '" & myDate & "'"
Set rstDate = New ADODB.Recordset
With rstDate
.ActiveConnection = cn
.CursorType = adOpenDynamic
.LockType = adLockOptimistic
.Open Criteria
End With
If rstDate.RecordCount > 0 Then
RecordExist = True
Else
RecordExist = False
rstDate.AddNew
rstDate("Date") = Format(myFileDate, "dd-mm-yyyy")
rstDate.Update
End If
rstDate.Close
End Sub
Regards,
May
View 1 Replies
View Related
Feb 28, 2001
Hi,
Dow do I search for a dat time in table like
select * from table where colDate = '1999-09-09+00:00:00.000'. This doesn't work so how to go abt it?
View 2 Replies
View Related
Nov 23, 2005
I have the following tableCREATE TABLE Readings(ReadingTime DATETIME NOT NULL DEFAULT(GETDATE()) PRIMARY KEY,Reading int NOT NULL)INSERT INTO Readings (ReadingTime, Reading) VALUES ('20050101', 1)INSERT INTO Readings (ReadingTime, Reading) VALUES ('20050201', 12)INSERT INTO Readings (ReadingTime, Reading) VALUES ('20050301', 15)INSERT INTO Readings (ReadingTime, Reading) VALUES ('20050401', 31)INSERT INTO Readings (ReadingTime, Reading) VALUES ('20050801', 51)INSERT INTO Readings (ReadingTime, Reading) VALUES ('20051101', 106)GO-- list the tableSELECT ReadingTime, Reading FROM ReadingsGOIt is a table of readings of a free-running counter that istime-stamped. I need to determine the value of the reading thatcorresponds to the closest date to the supplied dateAre there more optimal/efficient ways of accomplishing this than thefollowing?DECLARE @when DATETIMESET @when = '20050505'SELECT TOP 1 ReadingTime, Reading FROM ReadingsORDER BY abs(DATEDIFF(minute, ReadingTime, @when))The above gives me the desired result of ('20050401', 31).Any suggestions would be appreciated
View 1 Replies
View Related
Nov 1, 2007
I inherited a system and am moving our SQL2000 input data into a new 2005 database for web searching by clients. The conversion went pretty well, but I'm looking for suggestions on how best to index and query the data.
Details: We have almost 500,000 records in a pretty wide history table, and will be adding more records daily. The original table design has numerous sets of dates(first/last of different types), some small fields, and one large text field that is used for full-text catalog. The input dates are all stored as datetimes set to midnight by an insert trigger.
...
FirstPub as datetime
LastPub as datetime
FirstSale as datetime
LastSale as datetime
Name as varchar(50)
Addr as varchar(50)
DetailText as text....
I need to create a new asp.net page that can accept any specific date, or a range of dates (first/last publish date or range, first/last sale date or range) along with any of the optional 10 text fields. All input is optional, and any combination of fields can be entered. Result set has to include the primary key, key dates, and the large text field.
I've read many posts and articles, but find many different opinions about what works best. I found a similar solution that used a series of case statements with text operators indicating if the date was input or not. Other guys say no - just pass the dates as null without any additional control fields.
I found solutions saying it's best to pass dates as strings, and others that say to use datetime everywhere and just format the presentation. Some say convert dates to formatted dates and then compare them. Others say that causes table scans and should be avoided.
Questions:
1) What is the best way to get a compare dates that are entered through an asp.net page and stored procedures?
2) How to query either a specific date, as well as a range between the first and last date specified? Can it be done efficiently without needing additional screen fields for the range specification? If tried checking nulls, but am having trouble selecting multiple sets of date ranges and/or specific dates with one proc. There is always the old method of storing the selected keys in temp table, and then returning the distinct rows. Most of my experience has been in SQL 7.0 and some 2000, so I'm wondering if there are new ways to tackle the problem.
3) Better to create an index for each date type that might be selected, or one index that has all the main dates in one place?
4) Should we split the large text field to another table in our search database? It would seem to make sense to split them as we add records from the input system. Two tables linked with the same primary key seems like a good improvement from original table design. How would that affect the performance of returning all selected rows and including the large text field?
View 3 Replies
View Related
May 5, 2008
hi need help search in long date format
i have table like this
need to search date + time + minute
no second !
only date + time + minute no second
SELECT *
FROM tb_tb
WHERE (dateinb = CONVERT(DATETIME, '2008-05-05 14:58, 102))
dateinb
---------------------------
05/05/2008 14:51:03
05/05/2008 14:51:03
05/05/2008 14:51:03
05/05/2008 14:51:03
05/05/2008 14:53:03
05/05/2008 14:53:03
05/05/2008 14:53:03
05/05/2008 14:53:03
05/05/2008 14:56:03
05/05/2008 14:56:03
05/05/2008 14:56:03
05/05/2008 14:56:03
05/05/2008 14:58:09
05/05/2008 14:58:09
05/05/2008 14:58:09
05/05/2008 14:58:09
TNX
View 4 Replies
View Related
Aug 9, 2006
I'm just wonder if this is a bug in MS Search or am I doing something wrong.
I have a query below
declare @search_clause varchar(255)
set @Search_Clause = ' "hepatitis b" and "hepatocellular carcinoma"'
select * from results
where contains(finding,@search_clause)
I don't get the correct result at all.
If I change my search_clause to "hepatitis" and "hepatocellular carcinoma -- without the "b"
then i get the correct result.
It seems MS Search doesn't like the phrase contain one letter or some sort or is it a know bug?
Anyone know?
Thanks
View 3 Replies
View Related
Mar 17, 2008
I want to have a FromDateTextBox and a ToDateTextBox where the user can enter in dates (most likely in mm/dd/yy format, although intelligently handing other formats might be a plus). Then I want to use these dates as the basis for a WHERE clause like:<some sql...> WHERE start_date BETWEEN 'FromDateTextBox.Text' AND 'ToDateTextBox.Text' (Note this WHERE clause will be used as the basis for an SqlDataSource FilterExpression). 1. I believe the date strings need to be in the format 'yyyy-mm-dd' to search SQL server is this correct?2. What's a decent way to convert the strings from the textboxes to the required format?3. How can I avoid an SQL injection attack?
View 4 Replies
View Related
Apr 5, 2004
i am trying to search an SQL database to retrieve all names from employee table who have a birthday today. this needs to automatically fill in the date parameter with the system date. this is what i have so far:
sub page_load(sender as object, e as eventargs)
dtmDate=DateTime.Now.ToString("M")
con = New SqlConnection("Server=Localhost;UID=******;PWD=*****;Database=Pubs")
cmd = New SqlCommand("Select fname, lname From Employee where dob='& dtmDate'", con)
con.open()
dtrBday = cmd.ExecuteReader()
rptBday.DataSource=dtrBday
rptBday.DataBind()
dtrBday.Close()
I know this isnt quite right. i get errors when it hits my repeater.
the error i am getting is :Syntax error converting string to smalldatetime data type.
if someone could give me a push in the right direction here it would be greatly appreciated.
View 2 Replies
View Related
Jan 16, 2008
store procedure
@End_Date datetime
SELECT * FROM table1 WHERE PROCESS_DATE <= @End_Date
@End_Date format： 1/1/2008
PROCESS_DATE format: 1/1/2008 12:45:01 PM
I can not get the date after running the procedure using the value/format above. I think the problem is that SQL convert @End_Date value to 1/1/2008 00:00:00:AM, which makes 1/1/2008 12:45:01 PM > 1/1/2008
Since I only need to compare the date (no need time), how can I resolve the problem from the C# code or SQL level? Is that possbile to make 1/1/2008 default to the max datetime like 1/1/2008 11:59:59:PM?
View 4 Replies
View Related
