We have SQL Server 2005 configured with mirroring to protect from physical errors. We also have a need for an (out of sync is ok) reporting server and we'd like to reduce our downtime in the event of a logical error.
The primary database is already being backed up (full and t-logs) to a shared network drive.
Can I implement the second half of log shipping (i.e. the stuff you do to the secondary) so that I don't have to change the current backup schedules on the primary server?
Specifically in the list of sp's below, can I start halfway down at sp_add_log_shipping_secondary_primary (Transact-SQL) ?? Without having to run the primary sp's?
hi all, For data ware house project, the reporting team needs to know the delta changes to the master database.
one way we were thinking was to use log shipping and run reports / ETL off the secondary server. But the team needs to know which records got changed and i was thinking of adding timestamp columns to the necessary tables (only on the secondary database schema) and that way we can track the changes.
But from my research, it seems like secondary database needs to have similar schema as promary database.
Is log shipping, can my secondary db have a bit different schema? if so how to do it? If not, how to accomplish the above secanrio, with out adding new columns (if possible) in the master database and with low over head.
We have set up Log shipping between Primary and Secondary DB. The secondary DB is right now option: Standby/Read-Only. I can not take Backup of Secondary DB now.
Shall we disable Log shipping and change the DB Option to Multi-user mode and take backup? or any different method, without disabling log shipping?
I made B server which get logs from primary server A as a secondary server in the log shipping solution. it always shows RESTORING in B server, it seems not to accessible.
my question is <if A failed down , how to revoke the B server as the primary one>
I have setup Log shipping between two SQL 2005 servers, and everything seems to be working well. The files are transferring and restoring correctly.
My question is whether I need to add any backup procedures for the secondary server to prevent the secondary server's log file size from growing continuously. Should I be doing a transaction log backup on the secondary server? Or will that break the Log chain?
If it makes a difference, the secondary server is in Standby mode after applying the logs.
We are using MSSQL 2005 and Log Shipping. After making our secondary SQL server primary, how can we put the secondary SQL server back into standby mode?
We're planning to implement log shipping on our databases, and I have been toiling with it all weekend trying to get it to work on some test databases. The result is the same whether I do it via the wizard or manually via T-SQL.
I am using 3 servers, all SQL Server 2005 Standard SP1. All 3 SQL Servers are configured identically.
When I setup log shipping, it initializes with no problems. When it processes the first tran log file, it restores it with no problem. Every successive log file thereafter is not restored. No errors are generated. The only outright indication of a problem is that the monitor server shows that there has not been a recent restore.
The backup and copy both suceed. The restore claims to suceed. If I review the job history for each step, it says that it skipped the log file and then reports that it did not fina any log files to restore.
Message 2006-11-06 05:00:01.95 Could not find a log backup file that could be applied to secondary database 'MyDemo'. 2006-11-06 05:00:01.96 The restore operation was successful. Secondary Database: 'MyDemo', Number of log backup files restored: 0
I checked the server and found that LS restore job failing and Backup and copy jobs running fine without any issue. and also observed that Copy folder the trn file existing on secondary server. i try to restore trn file im getting the error. and observed that last log backup file that it restored at the secondary database on May2nd,2015.
2015-06-02 12:25:00.72*** Error: The log in this backup set begins at LSN 761571000000022500001, which is too recent to apply to the database. An earlier log backup that includes LSN 721381000002384200001 can be restored.
From Restore job histort details below.
Message 2015-06-02 12:25:00.72*** Error: The file 'xxxx\_20150530104503.trn' is too recent to apply to the secondary database 'database'.(Microsoft.SqlServer.Management.LogShipping) *** 2015-06-02 12:25:00.72*** Error: The log in this backup set begins at LSN 761571000000022500001, which is too recent to apply to the database. An earlier log backup that includes LSN 721381000002384200001 can be restored. RESTORE LOG is terminating abnormally.(.Net SqlClient Data Provider) *** 2015-06-02 12:25:00.73Searching for an older log backup file. Secondary Database: 'database' 2015-06-02 12:25:00.73*** Error: Could not find a log backup file that could be applied to secondary database 'database'.(Microsoft.SqlServer.Management.LogShipping) *** 2015-06-02 12:25:00.74Deleting old log backup files. Primary Database: 'database'
We tried to configure log shipping using script generated by GUI and when executed specific script which is meant for secondary server the database is not created and threw below error.
Msg 15010, Level 16, State 1, Procedure sp_add_log_shipping_secondary_database, Line 50
The database 'BUBALLO' does not exist. Supply a valid database name. To see available databases, use sys.databases.
Note: Only Copy, restore and alerts jobs have been created.
The account I'm trying to configure log shipping is the service account by which SQL and agent services are running and folder in where data and log files are intended and to be created is open to all (everybody has read/write permissioins) believe the issue is not with permissions.
I set up Log Shipping with just 2 servers primary and secondary. When I run from the Wizard for the very first time keeps failing at the stage of saving Secondary Server Configuration info. When i instead run the generated script this problem disappears but then restoring of transactions fails - the process can backup transactions from the Primary server , copy them accross to the secondary and fails on the restore. Any ideas why.
I have some trouble with shipping my transaction logs to the secondary database be it on
another server or within the same server to another database instance.
Im using SQL Server 2005 workGroup editions with Service Pack 2.
Here are the problems that i encountered.
I do hope someone has bumped into such a problem and willing to help me out.
I tried on 2 separate servers (not domain environment) and also between 2 separate instances (which is supposed to be simple!) on our development server,but was unsuccessful.
Between 2 separate instances on the development server - No error after configuring Log shipping though. The configuring went through and it was a success. Transaction logs was backup every minute and it got copied over to the other folder. But SQL Agent not doing its last job which is supposed to restore to the secondary database on another instance.No errors given out in SQL Agent error log files.Anywhere else im supposed to look to see if there are errors given out? Both instances SQL Agent has the same log on username and password with Administartive rights
So what went wrong?
Between the 2 servers- The transaction logs was backup every 1min on the primary server but it didn't got copied over to to the secondary database. - Error message given was:Error in restoring database to the secondary database.Network path given could not be found. Can't open the AxTest.bak file. (i am very sure i have type the correct network path,even have shared it out and i think the firewall is blocking incoming traffic since unlike our development server, which allows us to access when we use Start>Run and type in the ip address,user name and password,the primary server will only tell me no network path was found) I also believe it's because the SQL Agent on the secondary database server wasn't given permission to access the primary database folder. I've shared out the drive and folder on the secondary server and even have allowed SQL Agent to read,write and modify on both servers. For the primary and secondary SQL Agent, I configure their log on to be the same user account name and password which have administrative rights. So what went wrong?
Isit really true that both servers have to be in domain environment before you can configure log shipping,mirroring and replication?
Hope someone help me out of this predicament.Thank you in advance!
I am new to this environment and was asked to ensure that the transaction log shipping for SQL 2005 on W2K3 boxes is working properly. I noticed the db's on the secondary server are show "Restoring..." I am not sure if these were set up in No Recover Mode or Standby Mode. I have no access to the secondary db's. I get an error message when trying to access them (error 927). Monitoring was not set up initially and as you may or may not know can't be turned on after the fact...unless you delete the job and start over.
My question is is "Restoring..." normal and what does it indicate?
I am trying to implement a log shipping scenario in sql 2005 where the secondary server is in standby mode with the ability to roll change during failover.
With the help of BOL (ms-help://MS.SQLCC.v9/MS.SQLSVR.v9.en/udb9/html/2d7cc40a-47e8-4419-9b2b-7c69f700e806.htm) I can implement my scenario in Recovery mode, but not in standby mode. I use the following sql to put my primary in standby
BACKUP LOG [database] TO DISK = @filename WITH STANDBY = 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBackupROLLBACK_UNDO_database.BAK' GO
which works, but then my restore job fails on the last step. How can I put my primary db in standby mode in such a way that the log shipping restore will work?
I've configured log shipping to use for DR purposes. I'm concerned that the physical location of the secondary is mis-reported by SQL Server Management Studio.
Viewing the secondary location (with Studio DB_name Properties Files) shows the path of the primary DB (I expected it to show the path of the secondary).
This SQL command shows the correct/actual paths of both primary and secondary DB's when run on their host servers.
SELECT name, physical_name AS CurrentLocation, state_desc FROM sys.master_files
Is this just cosmetic?
Here is an Example of how the Studio shows the incorrect path for the secondary.
I received an alert from one of my two secondary servers (all servers are running 2012 SP1):
File 'E:SQLMS SQL ServerMSSQL11.MSSQLSERVERMSSQLDATAMyDatabaseName_DateTime.tuf' is not a valid undo file for database 'MyDatabaseName (database ID 8). Verify the file path, and specify the correct file.
The detail in the job step shows this additional information:
*** Error: Could not apply log backup file 'MyDatabaseName_DateTime.trn' to secondary database 'MyDatabaseName'.(Microsoft.SqlServer.Management.LogShipping) ***
*** Error: Table error: Page (0:0). Test (m_headerVersion == HEADER_7_0) failed. Values are 0 and 1.
Table error: Page (0:0). Test ((m_type >= DATA_PAGE && m_type <= UNDOFILE_HEADER_PAGE) || (m_type == UNKNOWN_PAGE && level == BASIC_HEADER)) failed. Values are 0 and 0.
Table error: Page (0:0). Test (m_freeData >= PageHeaderOverhead () && m_freeData <= (UINT)PAGESIZE - m_slotCnt * sizeof (Slot)) failed. Values are 0 and 8192. Starting a few minutes later, the Agent Job named LSRestore_MyServerName_MyDatabaseName fails every time it runs. The generated log backup, copy, and restore jobs run every 15 minutes.
I fixed the immediate problem by running a copy-only full backup on the primary, deleting the database on the secondary and restoring the new backup on the secondary with NORECOVERY. The restore job now succeeds and all seems fine. The secondaries only exists for DR purposes - no one runs reports against them or uses them at all. I had a similar problem last weekend on a different database that is also replicated between the same servers. I've been here for over a year, and these are the first instances of this problem that I've seen. However, I've now seen it twice in a week on the same server.
I have a scenario where a customer is going to be using Log Shipping to the DR site; however, we need to maintain the normal backup strategy on the current system. (i.e. Nightly Full, Every 6 Hour Differential and Hourly Transaction Log backup)I know how to setup Transaction Log Shipping and Fail-over to DR and backup but now the local backup strategy is going to be an issue. I use the [URL] .... maintenance solution currently.
Is it even possible to do regular backups locally keeping data integrity for your backup strategy with Transaction Log Shipping enabled?
i have created a new login in primary server and provided dbowner permission to primary db.how do i transfer this login to secondary server and assign the same permission to secondary db ?
I have not used log shipping before and find myself in a position where I need to reboot the secondary node and then the primary node and I don't actually need to failover.
Is there anything I need to be aware of. When rebooting the secondary node I assume the transactions will be held in the primary nodes log till the secondary comes back and just carry on once back up?
When rebooting the primary node nothing needs to be done and the log shipping will just start again once it has come back?
I would like to know how do I carry out this two cases in efficient way:
1. I have two SQL 2005 servers running. One as primary, one as secondary. I would like to synchronize or replicate the transactions at real-time.
2. When primary goes down, I would like my secondary server to take place in needless of IP changes and application settings.
If you have a good architecture on this, please share with me. I am not sure whether my questions are clear enough or not. I also will be reading some articles about these. Thank you in advance.
I have a primary SQL cluster, logshipping my SQL 2005 db to a secondary server used for the logshipping/recovery server only.
Say my primary server starts on fire, melts down, etc. How do I bring the database on the secondary server online? Do I need to roll in the transaction logs, etc.? I'm looking for a step-by-step, as I am very new to SQL.
I've seen some articles in the SQL Books Online, but things don't seem to work correctly when I follow the steps.
I am configuring log shipping. On the secondary server, I already restored the DB.From the primary server, I was following all the instructions on how to. Now this is the problem. I click on ADD button to connect to the secondary server. I put in the IPInstanceName and the DB. I also chose option 3 (No, the secondary database is initialized), clicked OK after all the option, now getting this error.
Inside my sp on the Primary server are 3 commands:
exec msdb..sp_start_job @job_name = N'JobA' -- Running on Primary ServerEXEC Server2.msdb.dbo.sp_start_job @job_name = N'JobB';Running on Secondary ServerSelect * from Server2.Table -- Running on Secondary Server
So far the commands are working just fine when I kick them off one at a time. But when I kick off the sp as a whole I notice that the timing just isn't keeping up. For instance, Step 3 is running before Step 2 is finished. It appears that as the Primary Server kicks off Step 2, it doesn't seem to care about the outcome and moves right to Step 3 which in turn provides me erroneous data.How can I get Step 3 to wait until Step 2 is actually finished keeping in mind the Secondary server is part of this equation?
I could not able to find Forums in regards to 'Log Shipping' thats why posting this question in here. Appriciate if someone can provide me answers depends on their experience.
Can we switch database recovery model when log shipping is turned on ?
We want to switch from Full Recovery to Bulk Logged Recovery to make sure Bulk Insert operations during the after hours load process will have some performance gain.
Assume if i have a connection(Application intent readonly) starts with reading, writing and again reading data for a report. how it will works in SQL 2014 Always availability on?
We are not able to failover the AG to secondary replica. The process gets timed out and AG goes to resolving mode. Had to reboot the box in order to switch the AG back to primary node. We even rebuilt the whole AG from scratch but the issue remains.
Failed to bring availability group 'xxxx' online. The operation timed out. Verify that the local Windows Server Failover Clustering (WSFC) node is online. Then verify that the availability group resource exists in the WSFC cluster. If the problem persists, you might need to drop the availability group and create it again. [SQLSTATE 42000] (Error 41131). The step failed.
We had a big issue today during maintenance work in our SQL environment.
So our environment: - 2x SQL Server 2014 Enterprise on Windows Server 2012 R2 (SRV1 and SRV2) -- Both Hyper-V VMs on different Hosts -- Both configured to an Windows Failover Cluster and AlwaysOn Availability Group (AG1) -- AG Listener: AG1_lis -- No shared storage (each Hyper-V Host has its own local storage) -- Asynchronous Mode -- SRV1 is primary, SRV2 is secondary SQL node
What happened? - Shutting down Windows on SRV2 due hardware maintenance - Cluster goes offline, AG1 goes offline -- Error message: "Stopped listening on virtual network name 'AG1_lis'." -- Error message: "The availability group database "DatabaseXY" is changing roles from "PRIMARY" to "RESOLVING" because the mirroring session or availability group failed over due to role synchronization."
Results? - AG1_lis wasn't available for our applications and they stopped working properly because database connection was lost!
I think, I HOPE, this is not the normale behaviour when one node is shutting down (especially the secondary node!)
Hi guys, right now I am having insufficient hard disc space at the secondary server (Mirror side) due to the large db that I have. Therefore, I get a new HDD on the server (Assuming located at drive G) and would like to shift the current mirroring db to that new drive. Is it possible for me to do that ? Hope able to get any suggestion from here ASAP. Thanks.
I noticed that after a SQL AlwaysOn failover, one of the DB in the secondary replica is stuck in Restoring state. The primary replica shows that it is in a synchronized state. These are the error logs from SSMS. How do I trace the cause of the problem?
Error: 5901, Severity: 16, State: 1. Nonqualified transactions are being rolled back in database for an AlwaysOn Availability Groups state change. Estimated rollback completion: 0%. This is an informational message only. No user action is required Error: 18400, Severity: 16, State: 1.
One or more recovery units belonging to database failed to generate a checkpoint. This is typically caused by lack of system resources such as disk or memory, or in some cases due to database corruption. Examine previous entries in the error log for more detailed information on this failure.
The background checkpoint thread has encountered an unrecoverable error. The checkpoint process is terminating so that the thread can clean up its resources. This is an informational message only. No user action is required.
