Security Alert-Driver Installation Issue, While Installing SQL Server 2000
Nov 20, 2007
i was trying to install sql server 2000 enterprise edition on win 2003 with SP1. i got stuck with this error sayinbg;"the driver software you are installing has not been properly signed with Autheticode(TM) technology. therefore windows cannot tell if the software has been modified since it was published. the publisher's identity cannot be verified because of a problem,
The installed INF file does not contain digital signature infromation"
Do you still want to install this driver software?
No matter what i click, either yes or no, it takes me nowhere. i googled it everywhere still could not find a solution. please let me know if you guys got any idea.
I have a server where I have been getting "SQL Alert Sev 24 : Fatal Error : Hardware Failure" for the past week.
Occurence : We disconnected the workstation (which we are using as SQL Server) from one floor and connected it to another floor. No Configurations changed. No hardware failures reported so far on the win 2000 box.
We are very well able to do the SQL development on that box. Everything seems normal except I get this error sent atleast once a day in the morning.
Regards, Kurt
Follow are the Erros/Warnings in the Event log. 1) The SNMP service is ignoring extension agent key SOFTWAREMicrosoftDHCPMibAgentCurrentVersion SOFTWAREMicrosoftWINSMibAgentCurrentVersion SOFTWAREMicrosoftIASAgentCurrentVersion SOFTWAREMicrosoftACSAgentCurrentVersion because it is missing or misconfigured.
2) Application popup. Service Control Manager : At least one service or driver failed during system startup. Use event viewer to examine the event log for details.
3) The site server ILS service service dependsd on the IIS Admin Service which failed to start becasue of the following error: The service cannot be started either because it is disable or because it has no enabled devices associated with it.
4) The remote access connection manager service depends ont eh Telephone service which failed to start because of the following error: The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.
5) Network Problem. The time service has not been able to synchronize with domain controller for a long time. ..
Is it possible to install and configure the MSDTC resource in a SQL Server 2000 cluster after SQL is installed and running?
When I recently went through a rebuild of my cluster, I forgot to install the resource before installing SQL Server. Now, if I install and bring online the MSDTC resource the SQL disk groups will not fail over correctly. The SQL Server resource will not come online.
Thanks in advance for any help. I would really like to avoid rebuilding again.
It seems that in order to get an email alert from SQL Server 2000 I need Microsoft Outlook orMicrosoft Exchange client installed. Is there any other way to get an email alert (not net send) when a back up is finished? for example using a @hotmail.com account?
I am trying to install SQL Server 2000 on a Win2K OS machine but Iget this error message:"A previous program installation created pending file operations onthe installation machine. You must restart the computer before runningsetup."I see others have had this problem but have fixed it using the solutionin:http://support.microsoft.com/defaul...kb;en-us;312995I have tried the solution but to no avail. The registry key:HKEY_LOCAL_MACHINESYSTEMCurrentControlSetContro lSessionManagerPendingFileRenameOperations keeps reappearing as soon as Iclose RegEdit.Any ideas?Thanks,lq
- ---------------------------------------------------------------------- Title: SQL Server Remote Data Source Function Contain Unchecked Buffers Date: 20 February 2002 Software: Microsoft SQL Server Impact: Run code of attacker's choice on server Max Risk: Moderate Bulletin: MS02-007
Microsoft encourages customers to review the Security Bulletin at: http://www.microsoft.com/technet/security/bulletin/MS02-007.asp. - ----------------------------------------------------------------------
Issue: ====== One of the features of Structured Query Language (SQL) in SQL Server 7.0 and 2000 is the ability to connect to remote data sources. One capability of this feature is the ability to use "ad hoc" connections to connect to remote data sources without setting up a linked server for less-often used data-sources. This is made possible through the use of OLE DB providers, which are low-level data source providers. This capability is made possible by invoking the OLE DB provider directly by name in a query to connect to the remote data source.
An unchecked buffer exists in the handling of OLE DB provider names in ad hoc connections. A buffer overrun could occur as a result and could be used to either cause the SQL Server service to fail, or to cause code to run in the security context of the SQL Server. SQL Server can be configured to run in various security contexts, and by default runs as a domain user. The precise privileges the attacker could gain would depend on the specific security context that the service runs in.
An attacker could exploit this vulnerability in one of two ways. They could attempt to load and execute a database query that calls one of the affected functions. Conversely, if a web-site or other database front-end were configured to access and process arbitrary queries, it could be possible for an attacker to provide inputs that would cause the query to call one of the functions in question with the appropriate malformed parameters.
Mitigating Factors: ==================== - The effect of exploiting the vulnerability would depend on the specific configuration of the SQL Server service. SQL Server can be configured to run in a security context chosen by the administrator. By default, this context is as a domain user. If the rule of least privilege has been followed, it would minimize the amount of damage an attacker could achieve.
- Both vectors for exploiting the vulnerability could be blocked by following best practices. Specifically, untrusted users should not be able to load and execute queries of their choice on a database server. In addition, publicly accessible database queries should filter all inputs prior to processing.
Patch Availability: =================== - A patch is available to fix this vulnerability. Please read the Security Bulletin at http://www.microsoft.com/technet/security/bulletin/ms02-007.asp for information on obtaining this patch.
- ---------------------------------------------------------------------- Title: SQL Server Remote Data Source Function Contain Unchecked Buffers Date: 20 February 2002 Software: Microsoft SQL Server Impact: Run code of attacker's choice on server Max Risk: Moderate Bulletin: MS02-007
Microsoft encourages customers to review the Security Bulletin at: http://www.microsoft.com/technet/security/bulletin/MS02-007.asp. - ----------------------------------------------------------------------
Issue: ====== One of the features of Structured Query Language (SQL) in SQL Server 7.0 and 2000 is the ability to connect to remote data sources. One capability of this feature is the ability to use "ad hoc" connections to connect to remote data sources without setting up a linked server for less-often used data-sources. This is made possible through the use of OLE DB providers, which are low-level data source providers. This capability is made possible by invoking the OLE DB provider directly by name in a query to connect to the remote data source.
An unchecked buffer exists in the handling of OLE DB provider names in ad hoc connections. A buffer overrun could occur as a result and could be used to either cause the SQL Server service to fail, or to cause code to run in the security context of the SQL Server. SQL Server can be configured to run in various security contexts, and by default runs as a domain user. The precise privileges the attacker could gain would depend on the specific security context that the service runs in.
An attacker could exploit this vulnerability in one of two ways. They could attempt to load and execute a database query that calls one of the affected functions. Conversely, if a web-site or other database front-end were configured to access and process arbitrary queries, it could be possible for an attacker to provide inputs that would cause the query to call one of the functions in question with the appropriate malformed parameters.
Mitigating Factors: ==================== - The effect of exploiting the vulnerability would depend on the specific configuration of the SQL Server service. SQL Server can be configured to run in a security context chosen by the administrator. By default, this context is as a domain user. If the rule of least privilege has been followed, it would minimize the amount of damage an attacker could achieve.
- Both vectors for exploiting the vulnerability could be blocked by following best practices. Specifically, untrusted users should not be able to load and execute queries of their choice on a database server. In addition, publicly accessible database queries should filter all inputs prior to processing.
Patch Availability: =================== - A patch is available to fix this vulnerability. Please read the Security Bulletin at http://www.microsoft.com/technet/security/bulletin/ms02-007.asp for information on obtaining this patch.
I first attempted to install SQL Server 2005 with the management tools, SQL server services installed ok but the management tools did not install. I tried to re-install the management tools but the setup program thought that they were already installed. I then un-installed everything in Add/Remove programs, & rebooted. I then tried to install again but this time it thought that the SQL server services were already installed. I removed the services from the registry and rebooted again. Now when I try to install SQL Server 2005 it simply fails
The last message in the log is "Note: 1: 1708 MSI (s) (A0:6C) [15:34:23:656]: Product: Microsoft SQL Server 2005 -- Installation failed"
Any help would be appreciated
MSI (s) (A0:6C) [15:34:22:593]: Note: 1: 1402 2: HKEY_LOCAL_MACHINESoftwareMicrosoftMicrosoft SQL ServerMSSQL.1MSSQLServer 3: 2 MSI (s) (A0:6C) [15:34:22:593]: Note: 1: 1325 2: v2.0.50727 MSI (s) (A0:6C) [15:34:22:593]: PROPERTY CHANGE: Adding ASPNET_EVENTLOGDLL.6BAD20EB_8CBD_4950_9F16_9F83B608665D property. Its value is 'C:WINDOWSMicrosoft.NETFrameworkv2.0.50727EventLogMessages.dll'. MSI (s) (A0:6C) [15:34:22:593]: Note: 1: 1402 2: HKEY_LOCAL_MACHINESoftwareMicrosoftMicrosoft SQL ServerMSSQL.1Replication 3: 2 MSI (s) (A0:6C) [15:34:22:593]: Note: 1: 1402 2: HKEY_LOCAL_MACHINESoftwareMicrosoftMicrosoft SQL ServerMSSQL.1Replication 3: 2 MSI (s) (A0:6C) [15:34:22:609]: Doing action: DetectSKUOS.D20239D7_E87C_40C9_9837_E70B8D4882C2 Action ended 15:34:22: AppSearch. Return value 1. MSI (s) (A0:74) [15:34:22:609]: Invoking remote custom action. DLL: C:WINDOWSInstallerMSI2B6.tmp, Entrypoint: DetectSKUOS Action start 15:34:22: DetectSKUOS.D20239D7_E87C_40C9_9837_E70B8D4882C2. <Func Name='LaunchFunction'> Function=DetectSKUOS <Func Name='SetCAContext'> <EndFunc Name='SetCAContext' Return='T' GetLastError='0'> Doing Action: DetectSKUOS PerfTime Start: DetectSKUOS : Thu Feb 22 15:34:22 2007 <Func Name='DetectSKUOS'> VersionNT/64 detected MsiNTProductType = 3 OS type: 0xf0000000, supported: 0xfff0ff00 <EndFunc Name='DetectSKUOS' Return='0' GetLastError='0'> PerfTime Stop: DetectSKUOS : Thu Feb 22 15:34:22 2007 <EndFunc Name='LaunchFunction' Return='0' GetLastError='0'> MSI (s) (A0:6C) [15:34:22:687]: Skipping action: DetectWYukonOS.D20239D7_E87C_40C9_9837_E70B8D4882C2 (condition is false) MSI (s) (A0:6C) [15:34:22:687]: Skipping action: SetErrorReporting (condition is false) MSI (s) (A0:6C) [15:34:22:687]: Skipping action: SetSqmReporting (condition is false) MSI (s) (A0:6C) [15:34:22:687]: Doing action: SetEnableRanu Action ended 15:34:22: DetectSKUOS.D20239D7_E87C_40C9_9837_E70B8D4882C2. Return value 1. MSI (s) (A0:6C) [15:34:22:687]: PROPERTY CHANGE: Modifying SqlEnableRanu property. Its current value is '0'. Its new value: '1'. Action start 15:34:22: SetEnableRanu. MSI (s) (A0:6C) [15:34:22:687]: Doing action: CCPSearch Action ended 15:34:22: SetEnableRanu. Return value 1. MSI (s) (A0:6C) [15:34:22:687]: Note: 1: 2205 2: 3: CCPSearch MSI (s) (A0:6C) [15:34:22:687]: Note: 1: 2228 2: 3: CCPSearch 4: SELECT `Signature_` FROM `CCPSearch` Action start 15:34:22: CCPSearch. MSI (s) (A0:6C) [15:34:22:687]: Doing action: RMCCPSearch Action ended 15:34:22: CCPSearch. Return value 0. MSI (s) (A0:6C) [15:34:22:687]: Note: 1: 2205 2: 3: CCPSearch MSI (s) (A0:6C) [15:34:22:687]: Note: 1: 2228 2: 3: CCPSearch 4: SELECT `Signature_` FROM `CCPSearch` Action start 15:34:22: RMCCPSearch. MSI (s) (A0:6C) [15:34:22:687]: Doing action: RestoreProductID Action ended 15:34:22: RMCCPSearch. Return value 0. MSI (s) (A0:20) [15:34:22:703]: Invoking remote custom action. DLL: C:WINDOWSInstallerMSI2B7.tmp, Entrypoint: RestoreProductID Action start 15:34:22: RestoreProductID. <Func Name='LaunchFunction'> Function=RestoreProductID <Func Name='SetCAContext'> <EndFunc Name='SetCAContext' Return='T' GetLastError='0'> Doing Action: RestoreProductID PerfTime Start: RestoreProductID : Thu Feb 22 15:34:22 2007 <Func Name='RestoreProductID'> <EndFunc Name='RestoreProductID' Return='0' GetLastError='0'> PerfTime Stop: RestoreProductID : Thu Feb 22 15:34:22 2007 <EndFunc Name='LaunchFunction' Return='0' GetLastError='0'> MSI (s) (A0:6C) [15:34:22:765]: Doing action: SetShowPID Action ended 15:34:22: RestoreProductID. Return value 1. MSI (s) (A0:6C) [15:34:22:781]: PROPERTY CHANGE: Adding ShowPID property. Its value is '1'. Action start 15:34:22: SetShowPID. MSI (s) (A0:6C) [15:34:22:781]: Doing action: ValidatePID Action ended 15:34:22: SetShowPID. Return value 1. MSI (s) (A0:50) [15:34:22:781]: Invoking remote custom action. DLL: C:WINDOWSInstallerMSI2B8.tmp, Entrypoint: ValidateProductID MSI (s) (A0!58) [15:34:22:843]: PROPERTY CHANGE: Adding CCPTrigger property. Its value is '2'. MSI (s) (A0!58) [15:34:22:843]: PROPERTY CHANGE: Adding PKU property. Its value is '0'. MSI (s) (A0!58) [15:34:22:843]: PROPERTY CHANGE: Adding PIDSEQ property. Its value is '271000003'. MSI (s) (A0!58) [15:34:22:843]: PROPERTY CHANGE: Adding PID property. Its value is '**********'. MSI (s) (A0!58) [15:34:22:843]: PROPERTY CHANGE: Adding ProductID property. Its value is '**********'. MSI (s) (A0!58) [15:34:22:843]: PROPERTY CHANGE: Adding DPID property. Its value is '**********'. MSI (s) (A0!58) [15:34:22:843]: PROPERTY CHANGE: Adding DigitalProductID property. Its value is '**********'. MSI (s) (A0!58) [15:34:22:843]: PROPERTY CHANGE: Adding PIDRET property. Its value is '0'. Action start 15:34:22: ValidatePID. MSI (s) (A0:6C) [15:34:22:843]: Doing action: DetectProductID Action ended 15:34:22: ValidatePID. Return value 1. MSI (s) (A0:20) [15:34:22:859]: Invoking remote custom action. DLL: C:WINDOWSInstallerMSI2B9.tmp, Entrypoint: DetectProductID Action start 15:34:22: DetectProductID. <Func Name='LaunchFunction'> Function=DetectProductID <Func Name='SetCAContext'> <EndFunc Name='SetCAContext' Return='T' GetLastError='0'> Doing Action: DetectProductID PerfTime Start: DetectProductID : Thu Feb 22 15:34:22 2007 <Func Name='DetectProductID'> <EndFunc Name='DetectProductID' Return='0' GetLastError='0'> PerfTime Stop: DetectProductID : Thu Feb 22 15:34:22 2007 <EndFunc Name='LaunchFunction' Return='0' GetLastError='0'> MSI (s) (A0:6C) [15:34:22:937]: Doing action: SetPIDKEY Action ended 15:34:22: DetectProductID. Return value 1. MSI (s) (A0:6C) [15:34:22:937]: PROPERTY CHANGE: Deleting PIDKEY property. Its current value is '**********'. Action start 15:34:22: SetPIDKEY. MSI (s) (A0:6C) [15:34:22:937]: Doing action: SetValidMOFInstanceNameProp.D20239D7_E87C_40C9_9837_E70B8D4882C2 Action ended 15:34:22: SetPIDKEY. Return value 1. MSI (s) (A0:4C) [15:34:22:953]: Invoking remote custom action. DLL: C:WINDOWSInstallerMSI2BA.tmp, Entrypoint: SetValidMOFInstanceNameProp Action start 15:34:22: SetValidMOFInstanceNameProp.D20239D7_E87C_40C9_9837_E70B8D4882C2. <Func Name='LaunchFunction'> Function=SetValidMOFInstanceNameProp <Func Name='SetCAContext'> <EndFunc Name='SetCAContext' Return='T' GetLastError='0'> Doing Action: SetValidMOFInstanceNameProp PerfTime Start: SetValidMOFInstanceNameProp : Thu Feb 22 15:34:23 2007 <Func Name='SetValidMOFInstanceNameProp'> MSI (s) (A0!60) [15:34:23:109]: PROPERTY CHANGE: Adding ValidMOFInstanceName property. Its value is '1'. Setting ValidMofInstanceName to 1 <EndFunc Name='SetValidMOFInstanceNameProp' Return='0' GetLastError='0'> PerfTime Stop: SetValidMOFInstanceNameProp : Thu Feb 22 15:34:23 2007 <EndFunc Name='LaunchFunction' Return='0' GetLastError='0'> MSI (s) (A0:6C) [15:34:23:109]: Doing action: CostInitialize Action ended 15:34:23: SetValidMOFInstanceNameProp.D20239D7_E87C_40C9_9837_E70B8D4882C2. Return value 1. MSI (s) (A0:6C) [15:34:23:125]: Machine policy value 'MaxPatchCacheSize' is 10 Action start 15:34:23: CostInitialize. MSI (s) (A0:6C) [15:34:23:125]: PROPERTY CHANGE: Adding ROOTDRIVE property. Its value is 'D:'. MSI (s) (A0:6C) [15:34:23:125]: PROPERTY CHANGE: Adding CostingComplete property. Its value is '0'. MSI (s) (A0:6C) [15:34:23:125]: Transforming table Component.
MSI (s) (A0:6C) [15:34:23:125]: Transforming table Component.
MSI (s) (A0:6C) [15:34:23:125]: Transforming table Component.
MSI (s) (A0:6C) [15:34:23:125]: Note: 1: 2205 2: 3: Patch MSI (s) (A0:6C) [15:34:23:125]: Note: 1: 2205 2: 3: PatchPackage MSI (s) (A0:6C) [15:34:23:125]: Note: 1: 2205 2: 3: MsiPatchHeaders MSI (s) (A0:6C) [15:34:23:125]: Note: 1: 2205 2: 3: __MsiPatchFileList MSI (s) (A0:6C) [15:34:23:125]: Note: 1: 2205 2: 3: PatchPackage MSI (s) (A0:6C) [15:34:23:125]: Note: 1: 2228 2: 3: PatchPackage 4: SELECT `DiskId`, `PatchId`, `LastSequence` FROM `Media`, `PatchPackage` WHERE `Media`.`DiskId`=`PatchPackage`.`Media_` ORDER BY `DiskId` MSI (s) (A0:6C) [15:34:23:125]: Doing action: SetFTSearchProperties.D20239D7_E87C_40C9_9837_E70B8D4882C2 Action ended 15:34:23: CostInitialize. Return value 1. MSI (s) (A0:C4) [15:34:23:140]: Invoking remote custom action. DLL: C:WINDOWSInstallerMSI2BC.tmp, Entrypoint: SetFTSearchProperties Action start 15:34:23: SetFTSearchProperties.D20239D7_E87C_40C9_9837_E70B8D4882C2. <Func Name='LaunchFunction'> Function=SetFTSearchProperties <Func Name='SetCAContext'> <EndFunc Name='SetCAContext' Return='T' GetLastError='0'> Doing Action: SetFTSearchProperties PerfTime Start: SetFTSearchProperties : Thu Feb 22 15:34:23 2007 <Func Name='SetFTSearchProperties'> MSI (s) (A0!C0) [15:34:23:250]: PROPERTY CHANGE: Modifying FTERudeInstName.68C6D15C_77E0_11D5_8528_00C04F68155C property. Its current value is 'MSSQLSERVER'. Its new value: 'MSSQL.1'. FTS Property Name: FTEInstName.68C6D15C_77E0_11D5_8528_00C04F68155C set MSI (s) (A0!C0) [15:34:23:250]: PROPERTY CHANGE: Modifying FTERegRoot.68C6D15C_77E0_11D5_8528_00C04F68155C property. Its current value is 'SoftwareMicrosoftMSSQLSERVERMSSearch'. Its new value: 'SOFTWAREMicrosoftMicrosoft SQL ServerMSSQL.1MSSearch'. FTS Property Name: FTERudeInstName.68C6D15C_77E0_11D5_8528_00C04F68155C set MSI (s) (A0!C0) [15:34:23:250]: PROPERTY CHANGE: Adding FTEInstanceSubDir.68C6D15C_77E0_11D5_8528_00C04F68155C property. Its value is 'MSSQL.1MSSQL'. FTS Property Name: FTERegRoot.68C6D15C_77E0_11D5_8528_00C04F68155C set FTS Property Name: FTEInstanceSubDir.68C6D15C_77E0_11D5_8528_00C04F68155C set FTS Property Name: FTEClusterSec.68C6D15C_77E0_11D5_8528_00C04F68155C set <EndFunc Name='SetFTSearchProperties' Return='0' GetLastError='0'> PerfTime Stop: SetFTSearchProperties : Thu Feb 22 15:34:23 2007 <EndFunc Name='LaunchFunction' Return='0' GetLastError='0'> MSI (s) (A0:6C) [15:34:23:265]: Doing action: FileCost Action ended 15:34:23: SetFTSearchProperties.D20239D7_E87C_40C9_9837_E70B8D4882C2. Return value 1. MSI (s) (A0:6C) [15:34:23:281]: Note: 1: 2262 2: Class 3: -2147287038 MSI (s) (A0:6C) [15:34:23:281]: Note: 1: 2262 2: Extension 3: -2147287038 MSI (s) (A0:6C) [15:34:23:281]: Note: 1: 2262 2: TypeLib 3: -2147287038 Action start 15:34:23: FileCost. MSI (s) (A0:6C) [15:34:23:281]: Doing action: IsolateComponents Action ended 15:34:23: FileCost. Return value 1. Action start 15:34:23: IsolateComponents. MSI (s) (A0:6C) [15:34:23:281]: Doing action: SQLLicensing.D20239D7_E87C_40C9_9837_E70B8D4882C2 Action ended 15:34:23: IsolateComponents. Return value 0. MSI (s) (A0:50) [15:34:23:296]: Invoking remote custom action. DLL: C:WINDOWSInstallerMSI2BD.tmp, Entrypoint: SQLLicensing Action start 15:34:23: SQLLicensing.D20239D7_E87C_40C9_9837_E70B8D4882C2. <Func Name='LaunchFunction'> Function=SQLLicensing <Func Name='SetCAContext'> <EndFunc Name='SetCAContext' Return='T' GetLastError='0'> Doing Action: SQLLicensing PerfTime Start: SQLLicensing : Thu Feb 22 15:34:23 2007 <Func Name='SQLLicensing'> <EndFunc Name='SQLLicensing' Return='0' GetLastError='0'> PerfTime Stop: SQLLicensing : Thu Feb 22 15:34:23 2007 <EndFunc Name='LaunchFunction' Return='0' GetLastError='0'> MSI (s) (A0:6C) [15:34:23:375]: Doing action: CAResolveInstanceName.68C6D15C_77E0_11D5_8528_00C04F68155C Action ended 15:34:23: SQLLicensing.D20239D7_E87C_40C9_9837_E70B8D4882C2. Return value 1. MSI (s) (A0:54) [15:34:23:390]: Invoking remote custom action. DLL: C:WINDOWSInstallerMSI2BE.tmp, Entrypoint: ResolveInstanceName Action start 15:34:23: CAResolveInstanceName.68C6D15C_77E0_11D5_8528_00C04F68155C. FTECa.DLL: INFO: FTE: ResolveInstanceName(), Entering... FTECa.DLL: INFO: FTE: This is NOT an Exchange Server install... FTECa.DLL: INFO: ResolveInstanceName: FTEInstName obtained: MSSQLSERVER FTECa.DLL: INFO: ResolveInstanceName: FTERudeInstName obtained: MSSQL.1 FTECa.DLL: INFO: LookupInstanceId: Iterating the key: 1 FTECa.DLL: ERROR: LookupInstanceId: RegQueryValueEx(RudeName) failed. Err = 2 Action ended 15:34:23: CAResolveInstanceName.68C6D15C_77E0_11D5_8528_00C04F68155C. Return value 3. Action ended 15:34:23: INSTALL. Return value 3. Property(S): ProductCode = {FFFA78A7-BD51-4255-8470-C4D4A85B49F5} Property(S): ProductLanguage = 1033 Property(S): Manufacturer = Microsoft Corporation Property(S): ProductVersion = 9.00.1399.06 Property(S): MEDIAPACKAGEPATH = Setup Property(S): ALLUSERS = 1 Property(S): NULLGUID = {00000000-0000-0000-0000-000000000000} Property(S): ASPNetVersion = 2.0.50727 Property(S): ARPHELPLINK = http://go.microsoft.com/fwlink/?LinkId=52152 Property(S): ARPPRODUCTICON = ARPIcon.ico Property(S): ARPNOREPAIR = 1 Property(S): ARPSYSTEMCOMPONENT = 1 Property(S): MsiHiddenProperties = SQLPASSWORD;AGTPASSWORD;ASPASSWORD;RSPASSWORD;SQLBROWSERPASSWORD;RSSQLPASSWORD;RSSQLPassword;RSSQLPasswordQuoted;RSSETUPPASSWORD;RSSetupPassword;SAPWD;saPWD;UPGRADEPWD;SqlUpgradePwd;SQLPassword;ServicePassword;ADMINPASSWORD;PIDKEY;FTEPassword.68C6D15C_77E0_11D5_8528_00C04F68155C;checksum.7354AFCB_913B_4E9F_B76C_2376101FDE0C;checksum.;DigitalProductID;DPID;Do_sqlScript.D20239D7_E87C_40C9_9837_E70B8D4882C2;Rollback_SqlConnection.D20239D7_E87C_40C9_9837_E70B8D4882C2;Do_XmlSingleNode.D20239D7_E87C_40C9_9837_E70B8D4882C2;Do_RSSetting.D20239D7_E87C_40C9_9837_E70B8D4882C2;PID;ProductID;RSUPGRADEPASSWORD;Do_RSSetSharePointExclusionPath.D20239D7_E87C_40C9_9837_E70B8D4882C2 Property(S): SecureCustomProperties = SQL_SHOWLIC;UPGRADESQL90 Property(S): SqlServerBuild = 1 Property(S): SqlCluster = 0 Property(S): INSTALLLEVEL = 90 Property(S): FXAssemblyVersion = 2.0.0.0 Property(S): VSAssemblyVersion = 8.0.0.0 Property(S): SqlErrorReporting = #0 Property(S): SqlSqmReporting = #0 Property(S): SqlEnableRanu = 1 Property(S): SqlPatchLevel = 9.00.1399.06 Property(S): ChannelID = 271 Property(S): PIDTemplate = 77654<````=````=````=````=`````>@@@@@ Property(S): mpc = 77654 Property(S): OEMRelease = 0 Property(S): SQLSETUPBOOTSTRAPSETUPPATH = C:Program FilesMicrosoft SQL Server90Setup Bootstrapsetup.exe Property(S): SQLSETUPARPWRAPPER = C:Program FilesMicrosoft SQL Server90Setup BootstrapARPWrapper.exe Property(S): UPGRADE_ADVISOR_CMD32 = C:Program FilesMicrosoft SQL Server90Setup Bootstrap Property(S): SQLIEMINVERSION = C:WINDOWSsystem32shdocvw.dll Property(S): ProgramFilesFolder = C:Program Files Property(S): ProductID = ********** Property(S): DigitalProductID = ********** Property(S): INSTALLSQLDIR = D:Program FilesMicrosoft SQL Server Property(S): INSTALLSQLDATADIR = D:Program FilesMicrosoft SQL Server Property(S): SqlCollation = Latin1_General_CI_AS Property(S): SqlInstanceName = MSSQLSERVER Property(S): saSetAutoSAPWDAndDisable = 1 Property(S): ShowPID = 1 Property(S): MDACSXS = 1 Property(S): DefaultUIFont = Tahoma8 Property(S): VersionNT = 502 Property(S): LocalSystemAccount = NT AUTHORITYSYSTEM Property(S): DefaultBuiltInAccount = LocalSystemAccount Property(S): NetworkServiceAccount = NT AUTHORITYNETWORK SERVICE Property(S): LocalServiceAccount = NT AUTHORITYLOCAL SERVICE Property(S): INSTALLSQLSHAREDDIR = D:Program FilesMicrosoft SQL Server Property(S): UI_INSTALLSQLSHAREDDIR = D:Program FilesMicrosoft SQL Server Property(S): SimpleFeatureTitle_Feat1 = SQL Server Database Services Property(S): SqlDisableNetworkProtocols = 2 Property(S): SimpleFeature_SQLEngineVS = Create a SQL Server failover cluster Property(S): SimpleFeature_Feat1 = &SQL Server Database Services Property(S): Service_AGT = SQL Server Agent Property(S): Service_OLAP = SQL Server Analysis Services Property(S): Service_SQL = SQL Server Property(S): Service_RS = SQL Server Reporting Services Property(S): Service_Browse = SQL Server Browser Property(S): Service_DTS = SQL Server Integration Services Property(S): Service_ADHelper = SQL Server Active Directory Helper Property(S): Service_SQLWriter = SQL Server VSS Writer Property(S): Service_FTS = SQL Server FullText Search Property(S): ServiceDesc_RS = Manages, executes, renders, schedules and delivers reports. Property(S): ServiceDesc_AGT = Executes jobs, monitors SQL Server, and fires alerts, and allows automation of some administrative tasks. Property(S): ServiceDesc_SQL = Provides storage, processing and controlled access of data and rapid transaction processing. Property(S): ServiceDesc_Browse = Provides SQL Server connection information to client computers. Property(S): ServiceDesc_OLAP = Supplies online analytical processing (OLAP) and data mining functionality for business intelligence applications. Property(S): ServiceDesc_DTS = Provides management support for SSIS package storage and execution. Property(S): ServiceDesc_ADHelper = Enables integration with Active Directories. Property(S): ServiceDesc_SQLWriter = Provides the interface to backup/restore Microsoft SQL server through the Windows VSS infrastructure. Property(S): ServiceDesc_FTS = Quickly creates full-text indexes on content and properties of structured and semi-structured data to allow fast linguistic searches on this data. Property(S): ServiceGroupDesc_ADHelper = Members in the group have the required access and privileges to be assigned as the log on account for the associated instance of SQL Server Active Directory Helper in SQL Server 2005. Property(S): ServiceGroupDesc_AGT = Members in the group have the required access and privileges to be assigned as the log on account for the associated instance of SQL Server Agent in SQL Server 2005. Property(S): ServiceGroupDesc_OLAP = Members in the group have the required access and privileges to be assigned as the log on account for the associated instance of SQL Server Analysis Services in SQL Server 2005. Property(S): ServiceGroupDesc_Browse = Members in the group have the required access and privileges to be assigned as the log on account for the associated instance of SQL Server Browser in SQL Server 2005. Property(S): ServiceGroupDesc_DTS = Members in the group have the required access and privileges to be assigned as the log on account for the associated instance of SQL Server Integration Services in SQL Server 2005. Property(S): ServiceGroupDesc_FTS = Members in the group have the required access and privileges to be assigned as the log on account for the associated instance of SQL Server and SQL Server FullText Search in SQL Server 2005. Property(S): ServiceGroupDesc_NS = Members in the group have the required access and privileges to be assigned as the log on account for the associated instance of SQL Server Notification Services in SQL Server 2005. Property(S): ServiceGroupDesc_RS = Members in the group have the required access and privileges to be assigned as the log on account for the associated instance of SQL Server Reporting Services in SQL Server 2005. Property(S): ServiceGroupDesc_RSWeb = Members in the group have the required access to be assigned as the log on account for the associated instance of SQL Server Reporting Services in SQL Server 2005 Property(S): ServiceGroupDesc_SQL = Members in the group have the required access and privileges to be assigned as the log on account for the associated instance of SQL Server and SQL Server FullText Search in SQL Server 2005. Property(S): ServiceGroupDesc_SQL_NEW = Members in the group have the required access and privileges to be assigned as the log on account for the associated instance of SQL Server in SQL Server 2005. Property(S): ServiceGroupDesc_FTS_NEW = Members in the group have the required access and privileges to be assigned as the log on account for the associated instance of SQL Server Full Text Search in SQL Server 2005. Property(S): DlgService_AGT = SQL Server Agent Property(S): DlgService_OLAP = Analysis Services Property(S): DlgService_SQL = SQL Server Property(S): DlgService_RS = Reporting Services Property(S): DlgService_Browse = SQL Browser Property(S): AutoStart_AGT = SQL Server A&gent Property(S): AutoStart_OLAP = &Analysis Services Property(S): AutoStart_SQL = &SQL Server Property(S): AutoStart_RS = Rep&orting Services Property(S): AutoStart_Browse = SQL Bro&wser Property(S): AutoStart_FTS = SQL Server &FullText Search Property(S): _AuthenticationType = Windows Property(S): SQL_rgCollation = 1 Property(S): OLAP_rgCollation = 0 Property(S): _InstanceType = Default Property(S): _LicensingMode = PerSeat Property(S): AGTLogin = DomainAccount Property(S): ASLogin = DomainAccount Property(S): SingleLogin = DomainAccount Property(S): SQLLogin = DomainAccount Property(S): RSLogin = DomainAccount Property(S): SQLBROWSERLogin = DomainAccount Property(S): _UpgradeLogon = Windows Property(S): _SampleDBMode = InstallSD Property(S): ButtonTextStyle = {ButtonTextStyle} Property(S): DlgTextStyle = {DlgTextStyle} Property(S): DlgTextStyleB = {DlgTextStyleB} Property(S): DlgTitleStyle = {DlgTitleStyle} Property(S): DlgTitleStyleB = {DlgTitleStyleB} Property(S): FixedStyle = {FixedStyle} Property(S): T_DataFree = T_DataFree Property(S): T_DataReq = T_DataReq Property(S): T_ProgramFree = T_ProgramFree Property(S): T_ProgramReq = T_ProgramReq Property(S): T_IPVal = T_IPVal Property(S): T_Subnet = T_Subnet Property(S): ErrorDialog = ErrorDlg Property(S): TextVSName = &Virtual server name: Property(S): ENABLERANU = 1 Property(S): AccountForAllNodesDlg_Desc = Account for remote setup. Property(S): AccountForAllNodesDlg_Text = Enter a user name and password that is a valid administrator account for all nodes in the cluster system. This will be used during setup only. Property(S): AccountForAllNodesDlg_Title = Remote Account Information Property(S): Authentication_ConfirmPWText = Confirm &password: Property(S): Authentication_DlgDesc = The authentication mode specifies the security used when connecting to SQL Server. Property(S): Authentication_DlgText = Select the authentication mode to use for this installation. Property(S): Authentication_DlgTitle = Authentication Mode Property(S): Authentication_EnterPWText = &Enter password: Property(S): Authentication_saPasswordText = Specify the sa logon password below: Property(S): Authentication_SQL = &Mixed Mode (Windows Authentication and SQL Server Authentication) Property(S): Authentication_Windows = &Windows Authentication Mode Property(S): BrowseFolder_ComboText = &Install in: Property(S): BrowseFolder_DlgDesc = You can select a different folder for installation. Property(S): BrowseFolder_DlgTitle = Change Folders Property(S): BrowseFolder_TailText = Installation &path: Property(S): BrowseFolder_TailTextShared = The SQL Server shared path has already been configured. Property(S): ButtonText_Abort = &Abort Property(S): ButtonText_Add = &Add Property(S): ButtonText_Back = < &Back Property(S): ButtonText_Browse = B&rowse... Property(S): ButtonText_Cancel = Cancel Property(S): ButtonText_Close = &Close Property(S): ButtonText_Complete = &Complete Property(S): ButtonText_ContinueLater = &Continue Later Property(S): ButtonText_DiskCost = &Disk Cost... Property(S): ButtonText_Exit = &Exit Property(S): ButtonText_Finish = &Finish Property(S): ButtonText_Help = &Help Property(S): ButtonText_Ignore = &Ignore Property(S): ButtonText_Install = &Install Property(S): ButtonText_Minimal = &Minimal Property(S): ButtonText_New = &New Property(S): ButtonText_Next = &Next > Property(S): ButtonText_No = &No Property(S): ButtonText_Normal = &Normal Property(S): ButtonText_OK = OK Property(S): ButtonText_Open = &Open Property(S): ButtonText_Reinstall = &Reinstall Property(S): ButtonText_ReinstallMode = &Select the reinstall mode Property(S): ButtonText_Remove = &Remove Property(S): ButtonText_Remove2 = &Remove Property(S): ButtonText_Report = &Report Property(S): ButtonText_Reset = &Reset Property(S): ButtonText_Restore = &Restore Property(S): ButtonText_Resume = &Resume Property(S): ButtonText_Retry = &Retry Property(S): ButtonText_Up = &Up Property(S): ButtonText_Yes = &Yes Property(S): Cancel_DlgDesc = Are you sure you want to cancel the installation? Property(S): Cancel_DlgText = The installation is not complete. If you exit the wizard now, Microsoft SQL Server will not be installed. Property(S): ClusterGroup_DlgDesc = Select the cluster group where the virtual server resources will be installed. Property(S): ClusterGroup_DlgStaticTextAvailable = Available cluster groups: Property(S): ClusterGroup_DlgStaticTextUnavailable = Unavailable cluster groups: Property(S): ClusterGroup_DlgTitle = Cluster Group Selection Property(S): ClusterNodeDlg_ButtonTextAdd = &Add -> Property(S): ClusterNodeDlg_ButtonTextRemove = <- &Remove Property(S): ClusterNodeDlg_StaticTextAvailableNode = Available nodes: Property(S): ClusterNodeDlg_StaticTextRequiredNode = Required node: Property(S): ClusterNodeDlg_StaticTextSelectedNode = Selected nodes: Property(S): ClusterNodeDlg_StaticTextUnavailableNode = Unavailable nodes: Property(S): ClusterNodeDlg_Text = Select the nodes to include in the virtual server. Property(S): ClusterNodeDlg_Title = Cluster Node Configuration Property(S): Collation_Service = S&ervice: Property(S): Collation_Service1 = Collation settings for service: Property(S): Collation_AS_Collation = Analysis Services Collation: Property(S): Collation_ChkBinary = Binary Property(S): Collation_ChkBinary2 = Binary - code point Property(S): Collation_ChkCase = Case - sensitive Property(S): Collation_ChkAccent = Accent - sensitive Property(S): Collation_ChkKana = Kana - sensitive Property(S): Collation_ChkWidth = Width - sensitive Property(S): Collation_Designator = Collation &designator and sort order: Property(S): Collation_DlgDesc = Collation settings define the sorting behavior for your server. Property(S): Collation_DlgCusomizeText = &Customize for each service account Property(S): Collation_DlgTitle = Collation Settings Property(S): Collation_SQL = &SQL collations (used for compatibility with previous versions of SQL Server) Property(S): DiskPrompt = Please insert next disk Property(S): DiskSpace_DlgDesc = Disk space required for the installation exceeds available disk space. Property(S): DiskSpace_DlgDesc1 = The available disk space and the space required for installation are shown below. Property(S): DiskSpace_DlgText = The highlighted volumes, if any, do not have enough disk space available for the currently selected features. Click Disk Cleanup to free disk space and then click Resume to continue the installation, or click Exit to exit the wizard. Property(S): DiskSpace_DlgTitle = Out of Disk Space Property(S): DiskSpace_DlgTitle1 = Disk Cost Property(S): DiskSpace_LBDiskCleanup = Use disk cleanup to free more disk space by removing unneeded files. Property(S): REASON_ADMIN_DISABLED = Administrative shares must be enabled in order to let Setup access remote nodes Property(S): REASON_DARWIN_VER = Windows installer is not present or has not the required version Property(S): REASON_DUP_INSTANCE_NAME_CLST = An instance with the same name is already installed in one or more nodes of the cluster. Property(S): REASON_GROUP_HOSTS_VS = Already contains a SQL Virtual Server Property(S): REASON_GROUP_NO_DISK = Does not contain any valid cluster disk Property(S): ERROR_INVALID_PID = This is an invalid Product Key value. Please check the number located on your Product Key sticker. Property(S): ERROR_INVALID_USERNAME = The Name is required for the installation. Property(S): REASON_NODE_DOWN = The node is down or unavailable Property(S): REASON_NOT_KNOWN = Unknown Property(S): REASON_PENDING_REBOOT = The node must be rebooted before running setup Property(S): REASON_SCC_CHECK_FAILED = A SCC check failed on the node Property(S): ERROR_UNKNOWN = Installation error. Install it by running setup.exe. Property(S): REASON_VERSION_ADDNODE = Adding nodes to the Virtual Server definition using a newer version of Setup is not allowed. Property(S): REASON_OS_VER = SQL Server requires Windows 2000 Service Pack 4, or Windows XP Service Pack 1 or later for installation. Property(S): REASON_OS_TYPE = This version of SQL Server is not supported on this version of Windows. Property(S): Exit_DlgDesc1 = Setup has installed Microsoft SQL Server successfully. Click Finish to exit. Property(S): Exit_DlgDesc2 = Setup has removed Microsoft SQL Server successfully. Click Finish to exit. Property(S): Exit_DlgDesc3 = Setup has updated Microsoft SQL Server successfully. Click Finish to exit. Property(S): Exit_DlgDesc4 = Setup has reinstalled Microsoft SQL Server successfully. Click Finish to exit. Property(S): Exit_DlgDesc5 = Setup has upgraded Microsoft SQL Server successfully. Click Finish to exit. Property(S): Exit_DlgTitle = Completing Microsoft SQL Server Setup Property(S): SimpleFeature_DlgDesc = Select the components to install or upgrade. Property(S): SimpleFeature_DlgTitle = Components to Install Property(S): SimpleFeature_Feat2 = &Analysis Services Property(S): SimpleFeature_AnalysisServerVS = Create an Analysis Server failover cluster Property(S): SimpleFeature_Feat3 = &Reporting Services Property(S): SimpleFeature_Feat4 = N&otification Services Property(S): SimpleFeature_Feat5 = &Integration Services Property(S): SimpleFeature_Feat6 = &Workstation components, Books Online and development tools Property(S): SimpleFeatureTitle_Feat2 = Analysis Services Property(S): SimpleFeatureTitle_Feat3 = Reporting Services Property(S): SimpleFeatureTitle_Feat4 = Notification Services Property(S): SimpleFeatureTitle_Feat5 = Integration Services Property(S): SimpleFeatureTitle_Feat6 = Client Components Property(S): SimpleFeature_Advanced = A&dvanced Property(S): SimpleFeature_AdvancedText = For more options, click Advanced. Property(S): SimpleFeature_Components = Components to be installed Property(S): SimpleFeature_OutOfSpace = There is not enough disk space to install the selected components. Click Advanced for more options. Property(S): Feature_DlgDesc = Select the program features you want installed. Property(S): Feature_DlgText = Click an icon in the following list to change how a feature is installed. Property(S): Feature_DlgTitle = Feature Selection Property(S): Feature_FeatureFrame = Feature description Property(S): Feature_GroupBox1 = Installation path Property(S): FileInUse_DlgDesc = Some files that need to be updated are currently in use. Property(S): FileInUse_DlgText = The following applications are using files that need to be updated by this setup. Close these applications and click Retry to continue. Property(S): FileInUse_DlgTitle = Files in Use Property(S): InitDlg_Title = Microsoft SQL Server Installation Property(S): InitDlg_Desc = Setup is preparing to continue with the installation. Property(S): InitDlg_Text = Please wait while setup prepares to continue with the installation. Property(S): Instance_Default = &Default instance Property(S): Instance_DlgDesc = You can install a default instance or you can specify a named instance. Property(S): Instance_DlgText = Provide a name for the instance. For a default installation, click Default instance and click Next. To upgrade an existing default instance, click Default instance. To upgrade an existing named instance select Named instance and specify the instance name. Property(S): Instance_DlgText1 = To view a list of existing instances and components click on Installed instances. Property(S): Instance_DlgTitle = Instance Name Property(S): Instance_Named = N&amed instance Property(S): IPAddress_DlgDesc = Enter virtual server information. Property(S): IPAddress_DlgStaticTextClusterIP = Network address: Property(S): IPAddress_DlgStaticTextIPAddress = &IP address: Property(S): IPAddress_DlgStaticTextIPSel = &Selected networks and IP addresses: Property(S): IPAddress_DlgStaticTextNetToUse = N&etwork to use: Property(S): IPAddress_DlgStaticTextSubnet = Network subnet: Property(S): IPAddress_DlgStaticTextVSName = Virtual server name: Property(S): IPAddress_DlgText = Enter an IP address for the virtual server. To add IP addreses for additional networks, click Add. Property(S): IPAddress_DlgTitle = Virtual Server Configuration Property(S): License_Devices = devices Property(S): License_Processors = processors Property(S): LicenseModeDlg_DlgDesc = SQL server supports two client licensing modes: per seat licensing and processor licensing. Property(S): LicenseModeDlg_DlgText = Choose the appropriate licensing modes. Property(S): LicenseModeDlg_DlgText1 = Per seat license: each device that accesses Microsoft SQL Server requires a separate license. Property(S): LicenseModeDlg_DlgText2 = Processor license: each processor on this server requires a separate license. Property(S): LicenseModeDlg_DlgTitle = Licensing Mode Property(S): LicenseModeDlg_Processor = &Processor license for Property(S): LicenseModeDlg_RadioButtonGroup = Licensing mode Property(S): LicenseModeDlg_Seat = Per &seat license for Property(S): Maintenance_ChgLabel = Ch&ange Installed Components Property(S): Maintenance_ChgLabelCl = &Maintain the Virtual Server Property(S): Maintenance_ChgText = Maintain features of this instance. Property(S): Maintenance_ChgTextCl = Add or remove nodes to the virtual server. Property(S): Maintenance_DlgDesc = You can change or remove this instance of SQL Server. Property(S): Maintenance_DlgTitle = Change or Remove Instance Property(S): Maintenance_RmvLabel = R&emove Microsoft SQL Server Property(S): Maintenance_RmvText = Remove all features of this existing installation from your computer. Property(S): Maintenance_RmvTextCl = Remove the virtual server from your cluster. Property(S): Maintenance_ChgLabelResume = Complete the &suspended installation Property(S): Maintenance_ChgTextResume = Complete the suspended installation of Microsoft SQL Server on your computer. Property(S): Progress_DlgDesc1 = The program features you selected are being installed. Property(S): Progress_DlgDesc2 = The Microsoft SQL Server is being removed. Property(S): Progress_DlgDesc3 = Setup is installing the components you selected. Property(S): Progress_DlgDesc4 = The Microsoft SQL Server is being reinstalled. Property(S): Progress_DlgText1 = Please wait while Setup installs Microsoft SQL Server. Installation may take several minutes. Property(S): Progress_DlgText2 = Please wait while Setup removes Microsoft SQL Server. This may take several minutes. Property(S): Progress_DlgText3 = Please wait while Setup updates Microsoft SQL Server. This may take several minutes. Property(S): Progress_DlgText4 = Please wait while Setup reinstalls Microsoft SQL Server. Installation may take several minutes. Property(S): Progress_DlgTitle1 = Installing Microsoft SQL Server Property(S): Progress_DlgTitle2 = Removing Microsoft SQL Server Property(S): Progress_DlgTitle3 = Configuring Microsoft SQL Server Property(S): Progress_DlgTitle4 = Reinstalling Microsoft SQL Server Property(S): Progress_lbStatus = Status: Property(S): Register_CompLabel = C&ompany: Property(S): Register_DlgSpec = The following information will personalize your installation. Property(S): Register_DlgText = The Name field must be filled in prior to proceeding. The Company field is optional. Property(S): Register_DlgText1 = Please enter your 25 character Product Key. You can find this number on the yellow sticker in the CD liner notes or the CD sleeve. Property(S): Register_DlgTitle = Registration Information Property(S): Register_NameLabel = N&ame: Property(S): Resume_ResumeText = Setup will complete the suspended installation of Microsoft SQL Server on your computer. To continue, click Next. Property(S): Resume_TextLine1 = Microsoft SQL Server Installation Wizard Property(S): ServiceAccountDlg_Advanced = &Customize for each service account Property(S): ServiceAccountDlg_Autostart = Start services at the end of setup Property(S): ServiceAccountDlg_AutostartServices = Start services at the end of setup Property(S): ServiceAccountDlg_DlgDesc = Service accounts define which accounts to log in. Property(S): ServiceAccountDlg_DlgTitle = Service Account Property(S): ServiceAccountDlg_Domain = Use a domain use&r account Property(S): ServiceAccountDlg_DomainLabel = &Domain: Property(S): ServiceAccountDlg_BuiltIn = Use the built-in S&ystem account Property(S): ServiceAccountDlg_PasswordLabel = &Password: Property(S): ServiceAccountDlg_Service = S&ervice: Property(S): ServiceAccountDlg_Service1 = Service: Property(S): ServiceAccountDlg_UsernameLabel = &Username: Property(S): Setup = Setup Property(S): StartCopy_DlgDesc = Setup is ready to begin installation. Property(S): StartCopy_DlgDescReinst = Setup is ready to begin reinstallation. Property(S): StartCopy_DlgDescRemove = You have chosen to remove the program from your system. Property(S): StartCopy_DlgDescRemoveCl = You have chosen to remove the program from your cluster. Property(S): StartCopy_DlgDescVSConfig = Setup is ready to begin updating your virtual server. Property(S): StartCopy_DlgText = Setup has enough information to start copying the program files. To proceed, click Install. To change any of your installation settings, click Back. To exit setup, click Cancel. Property(S): StartCopy_DlgText2 = Click Cancel to exit setup. Property(S): StartCopy_DlgTextConfig = Setup has enough information to start installation. Click Install to proceed. Property(S): StartCopy_DlgTextReinstData = You have chosen to re-install all features of existing installation including data files, and therefore overwrite the system database. Click Reinstall to proceed. Property(S): StartCopy_DlgTextReinst = You have chosen to re-install all features of existing installation. Click Reinstall to proceed. Property(S): StartCopy_DlgTextRemove = Click Remove to remove Microsoft SQL Server from your computer. After removal, this program will no longer be available for use. Property(S): StartCopy_DlgTextRemoveCl = Click Remove to remove Microsoft SQL Server from your cluster. After removal, this program will no longer be available for use. Property(S): StartCopy_DlgTextUnchanged = You did not change your virtual server configuration. Property(S): StartCopy_DlgTitle = Ready to Install Property(S): StartCopy_DlgTitleConfig = Ready to Update Property(S): StartCopy_DlgTitleReinst = Ready to Reinstall Property(S): StartCopy_DlgTitleRemove = Remove Microsoft SQL Server Property(S): StaticUserName = Account: Property(S): StaticUserPassword = &Password: Property(S): TextDataDir = &Data files: Property(S): TextProgramFileDir = Program files: Property(S): UpgradeLogon_DlgDesc = Database account for upgrading. Property(S): UpgradeLogon_DlgText = The authentication mode specifies the security used when connecting to SQL Server during database upgrading. Property(S): UpgradeLogon_DlgTitle = Upgrade Logon Information Property(S): UpgradeLogon_Password = &Password: Property(S): UpgradeLogon_SQL = &SQL Server Authentication Mode Property(S): UpgradeLogon_SQLText = Enter SQL Server account: Property(S): UpgradeLogon_UserName = &Username: Property(S): UpgradeLogon_Windows = &Windows Authentication Mode Property(S): UserExit_FinishText1 = To complete installation at another time, please run setup again. Property(S): UserExit_FinishText2 = Click Finish to exit setup. Property(S): UserExit_RestContText1 = You can either keep any existing installed elements on your system to continue this installation at a later time or you can restore your system to its original state prior to the installation. Property(S): UserExit_RestContText2 = Click Restore or Continue Later to exit the installation wizard. Property(S): UserExit_TextLine = Setup was interrupted before Microsoft SQL Server could be completely installed. Property(S): VirtualServer_DlgDesc = The virtual server name must be unique on the network. Property(S): VirtualServer_DlgText = Enter the name of the new virtual server. Property(S): VirtualServer_DlgTitle = Virtual Server Name Property(S): WARNING_QUORUMGROUP1 = You have chosen the group containing the quorum resource. It is strongly recommended that you should not use the quorum group with SQL Server. Property(S): WARNING_QUORUMGROUP2 = Are you sure you want to proceed? Property(S): DWTITLENAME = Microsoft SQL Server Setup Property(S): DWHEADERTEXT = Microsoft SQL Server Setup was unable to install on your computer. Property(S): DWERRORTEXT = Microsoft SQL Server Setup has encountered a problem and will end. Property(S): ErrorDlg_Title = Microsoft SQL Server Setup Property(S): Wait_Title = Please wait... Property(S): Wait_Database = Validating settings. Property(S): Wait_Service = Starting Service: [1] Property(S): Wait_Connect = Validating database access on SQL Server [1]. Property(S): ErrorReporting_DlgDesc = Help Microsoft improve some of the SQL Server 2005 components and services. Property(S): ErrorReporting_DlgText1 = For more information on the error reporting feature and the type of information sent, click Help. Property(S): ErrorReporting_DlgText1_Property = ErrorReporting_DlgText1 Property(S): ErrorReporting_DlgText1_Express = By installing Microsoft SQL Server 2005, SQL Server and its components will be configured to automatically send fatal service error reports to Microsoft or a Corporate Error Reporting Server. Microsoft uses error reports to improve SQL Server functionality, and treats all information as confidential. Property(S): ErrorReporting_DlgTitle = Error and Usage Report Settings Property(S): ErrorReporting_CheckBox = &Automatically send Error reports for SQL Server 2005 to Microsoft or your corporate error reporting server. Error reports include information regarding the condition of SQL Server 2005 when an error occurred, your hardware configuration and other data. Error reports may unintentionally include personal information, which will not be used by Microsoft. Property(S): ErrorReporting_SQM_CheckBox = Automatically send &Feature Usage data for SQL Server 2005 to Microsoft. Usage data includes anonymous information about your hardware configuration and how you use our software and services. Property(S): EnableRanu_DlgDesc = Configure Run As Normal User mode. Property(S): EnableRanu_DlgText1 = Allow users who do not have administrator privileges to run a separate instance of the Database Engine. Property(S): EnableRanu_DlgText1_Property = EnableRanu_DlgText1 Property(S): EnableRanu_DlgTitle = User Instances Property(S): EnableRanu_CheckBox = &Enable User Instances Property(S): BrowseFolder_VolumeList = Program files must be installed on a valid local disk available on all cluster nodes. The volumes values are: Property(S): ProductClash_DlgTitle = Existing components Property(S): ProductClash_DlgDesc = Components have been found on the machine. Select upgrade options below. Property(S): ProductClash_DlgText = The following components that you chose to install are already installed on the machine. To view a report of available options and alternatives click on Details. Property(S): ProductClash_Detail = &Details... Property(S): ProductClash_Warning = Components shared between SQL Server instances will be removed if they belong only to the SQL Server instance being upgraded. Property(S): ProductClash_LegacyTools = Management Tools Property(S): ProductClash_LegacyDTS = Data Transformation Services Property(S): DetailDlg_DlgTitle = Installation options Property(S): DetailDlg_DlgDesc = The list below shows installed components and upgrade options. Property(S): InstanceListDlg_DlgTitle = Installed instances Property(S): InstanceListDlg_DlgDesc = The list below contains all existing instances and components installed on this machine. Property(S): InstanceListDlg_InstanceListText = To view details for an installed instance, select an instance from the list below. To proceed, select the instance name to upgrade and click OK. Property(S): InstanceListDlg_TypeText = Type: Property(S): InstanceListDlg_VersionText = Version: Property(S): InstanceListDlg_EditionText = Edition: Property(S): InstanceListDlg_LanguageText = Language: Property(S): InstanceListDlg_DetailGroup = Installed Instance Details Property(S): Instance_Instances = &Installed instances Property(S): Product_YukonServer = Yukon Server Property(S): Product_SQLServer = SQL Server Property(S): Product_AnalysisServices = Analysis Services Property(S): Product_ReportServer = Reporting Services Property(S): ProductClash_Maintain = (Cannot maintain product, to maintain the product go to Add or Remove Programs) Property(S): ProductClash_Upgrade = (Cannot upgrade product, to maintain the product go to Add or Remove Programs) Property(S): ProductClash_UpgradeAsVS = (Upgrade product to Virtual Server) Property(S): ProductClash_Virtualize = (Cannot virtualize product) Property(S): Detail_Name = Name: Property(S): Detail_AllowedAction = Allowed Action: Property(S): Detail_Reason = Reason: Property(S): Detail_Warning = Warning: Property(S): Detail_ActionMaintain = Maintain (Action is only available from Add or Remove Programs) Property(S): Detail_ReasonMaintain = Cannot maintain product, to maintain the product go to Add or Remove Programs Property(S): Detail_ActionUpgrade = Upgrade Property(S): Detail_ReasonUpgrade = Product can be upgraded to a new version Property(S): Detail_ActionNone = None Property(S): Detail_ReasonNoVirtualize = Product cannot be virtualized Property(S): Detail_ReasonNone = Upgrades are not supported yet Property(S): Detail_ReasonBlock = Your upgrade is blocked. For more information about upgrade support, see the "Version and Edition Upgrades" and "Hardware and Software Requirements" topics in SQL Server 2005 Setup Help or SQL Server 2005 Books Online. Property(S): Detail_ReasonRemoveDTS = The SQL Server instance you are upgrading includes Data Transformation Services. Following the upgrade, Data Transformation Services will be removed unless there are other SQL Server instances installed that share it. Click on help for more information. Property(S): Detail_ReasonRemoveTools = The SQL Server instance you are upgrading includes SQL Server Management Tools. Following the upgrade, previous versions of SQL Server Management Tools will be removed unless there are other SQL Server instances installed that share them. Do not use previous versions of SQL Server Management Tools with SQL Server 2005. Instead, use SQL Server 2005 Management Tools included in the SQL Server 2005 Workstation Components feature. Property(S): SampleDatabase_DlgDesc = Configure how the sample databases are installed. Property(S): SampleDatabase_DlgText = Specify a method to install the sample databases to an existing instance of SQL Server. To attach the sample databases, you must have permissions to create databases on the specified instance. Property(S): SampleDatabase_DlgTitle = Sample Databases Setup Property(S): SampleDatabase_ServerText = &SQL Server instance: Property(S): SampleDatabase_Install = &Install sample databases without attaching Property(S): SampleDatabase_Attach = Install and &attach sample databases Property(S): Report_ActionUpgrade = Upgrade Property(S): Report_ActionVirtualize = Virtualize Property(S): Report_InstallTitle = The following components will be installed: Property(S): Report_BlockTitle = The following components that you selected will not be changed: Property(S): Report_WarnSPTitle = Warning: Setup found that the following components that already exist are at a different service pack level than the components being installed. Property(S): Report_WarnSPCompList = Components: Property(S): Report_WarnSPTail = After completing setup, you must download and apply the latest SQL Server 2005 service pack to all the components. Property(S): UpgradeTools = Upgrading tools [1] Property(S): UpgradeRepl = Upgrading replication [1] Property(S): UpgradeEngine = Upgrading SQL Engine [1] Property(S): UpgradeDTS = Upgrading DTS [1] Property(S): HideAdvancedOptionsText = Hi&de advanced configuration options Property(S): ArpProductDispayName = Microsoft SQL Server 2005 Property(S): Built_inLocalSystem = Local system Property(S): Built_inNetworkService = Network service Property(S): Built_inLocalService = Local service Property(S): Wait_UpgradeBlocker_Title = Analyzing Upgrade Property(S): Wait_UpgradeBlocker_Status = Validating Upgrade Options. Property(S): UpgradeBlockerDlg_DlgDesc = The following issues currently block upgrading to SQL Server 2005 Property(S): UpgradeBlockerDlg_DlgTitle = Upgrade Blocked Property(S): UpgradeBlockerDlg_UAWarning = For assistance in resolving these issues, run Upgrade Advisor. You can install Upgrade Advisor from the SQL Server 2005 Setup Splash Screen. Property(S): DomainGroup_DlgTitle = Domain Groups for Clustered Services Property(S): DomainGroup_DlgText = The startup account for each clustered service will be added to the DomainNameGroupName to set its access control. Enter the name of existing DomainNameGroupName for each clustered service being installed. For additional information, click Help. Property(S): DomainGroup_Browse = ... Property(S): DomainGroupDlg_Service = Service Name Property(S): DomainGroupDlg_Group = DomainNameGroupName Property(S): SqlDomainGroup_SQL = &SQL Server Property(S): SqlDomainGroup_AGT = S&QL Server Agent Property(S): SqlDomainGroup_FTS = &Full-Text Search Property(S): SqlDomainGroup_AS = &Analysis Services Property(S): SqlDomainGroupService_SQL = SQL Server Property(S): SqlDomainGroupService_AGT = SQL Server Agent Property(S): SqlDomainGroupService_FTS = Full-Text Search Property(S): SqlDomainGroupService_AS = Analysis Services Property(S): SqlSortId030 = Binary order, for use with the 437 (U.S. English) Character Set. Property(S): SqlSortId031 = Dictionary order, case-sensitive, for use with the 437 (U.S. English) Character Set. Property(S): SqlSortId032 = Dictionary order, case-insensitive, for use with the 437 (U.S. English) Character Set. Property(S): SqlSortId033 = Dictionary order, case-insensitive, uppercase preference, for use with the 437 (U.S. English) Character Set. Property(S): SqlSortId034 = Dictionary order, case-insensitive, accent-insensitive, for use with the 437 (U.S. English) Character Set. Property(S): SqlSortId035 = Binary order based on code point comparison, for use with the 437 (U.S. English) Character Set. Property(S): SqlSortId040 = Binary order, for use with the 850 (Multilingual) Character Set. Property(S): SqlSortId041 = Dictionary order, case-sensitive, for use with the 850 (Multilingual) Character Set. Property(S): SqlSortId042 = Dictionary order, case-insensitive, for use with the 850 (Multilingual) Character Set. Property(S): SqlSortId043 = Dictionary order, case-insensitive, uppercase preference, for use with the 850 (Multilingual) Character Set. Property(S): SqlSortId044 = Dictionary order, case-insensitive, accent-insensitive, for use with the 850 (Multilingual) Character Set. Property(S): SqlSortId045 = Binary order based on code point comparison, for use with the 850 (Multilingual) Character Set. Property(S): SqlSortId049 = Strict compatibility with version 1.x case-insensitive databases, for use with the 850 (Multilingual) Character Set. Property(S): SqlSortId051 = Dictionary order, case-sensitive, for use with 1252 Character Set. Property(S): SqlSortId052 = Dictionary order, case-insensitive, for use with 1252 Character Set. Property(S): SqlSortId053 = Dictionary order, case-insensitive, uppercase preference, for use with 1252 Character Set. Property(S): SqlSortId054 = Dictionary order, case-insensitive, accent-insensitive, for use with 1252 Character Set. Property(S): SqlSortId055 = Alternate dictionary order, case-sensitive, for use with the 850 (Multilingual) Character Set. Property(S): SqlSortId056 = Alternate dictionary order, case-insensitive, uppercase preference, for use with the 850 (Multilingual) Character Set. Property(S): SqlSortId057 = Alternate dictionary order, case-insensitive, accent-insensitive, for use with the 850 (Multilingual) Character Set. Property(S): SqlSortId058 = Scandinavian dictionary order, case-insensitive, uppercase preference, for use with the 850 (Multilingual) Character Set. Property(S): SqlSortId059 = Scandinavian dictionary order, case-sensitive, for use with the 850 (Multilingual) Character Set. Property(S): SqlSortId060 = Scandinavian dictionary order, case-insensitive, for use with the 850 (Multilingual) Character Set. Property(S): SqlSortId061 = Alternate dictionary order, case-insensitive, for use with the 850 (Multilingual) Character Set. Property(S): SqlSortId081 = Dictionary order, case-sensitive, for use with the 1250 (Central European) Character Set. Property(S): SqlSortId082 = Dictionary order, case-insensitive, for use with the 1250 (Central European) Character Set. Property(S): SqlSortId083 = Czech dictionary order, case-sensitive, for use with the 1250 (Central European) Character Set. Property(S): SqlSortId084 = Czech dictionary order, case-insensitive, for use with the 1250 (Central European) Character Set. Property(S): SqlSortId085 = Hungarian dictionary order, case-sensitive, for use with the 1250 (Central European) Character Set. Property(S): SqlSortId086 = Hungarian dictionary order, case-insensitive, for use with the 1250 (Central European) Character Set. Property(S): SqlSortId087 = Polish dictionary order, case-sensitive, for use with the 1250 (Central European) Character Set. Property(S): SqlSortId088 = Polish dictionary order, case-insensitive, for use with the 1250 (Central European) Character Set. Property(S): SqlSortId089 = Romanian dictionary order, case-sensitive, for use with the 1250 (Central European) Character Set. Property(S): SqlSortId090 = Romanian dictionary order, case-insensitive, for use with the 1250 (Central European) Character Set. Property(S): SqlSortId091 = Croatian dictionary order, case-sensitive, for use with the 1250 (Central European) Character Set. Property(S): SqlSortId092 = Croatian dictionary order, case-insensitive, for use with the 1250 (Central European) Character Set. Property(S): SqlSortId093 = Slovak dictionary order, case-sensitive, for use with the 1250 (Central European) Character Set. Property(S): SqlSortId094 = Slovak dictionary order, case-insensitive, for use with the 1250 (Central European) Character Set. Property(S): SqlSortId095 = Slovenian dictionary order, case-sensitive, for use with the 1250 (Central European) Character Set. Property(S): SqlSortId096 = Slovenian dictionary order, case-insensitive, for use with the 1250 (Central European) Character Set. Property(S): SqlSortId105 = Dictionary order, case-sensitive, for use with the 1251 (Cyrillic) Character Set. Property(S): SqlSortId106 = Dictionary order, case-insensitive, for use with the 1251 (Cyrillic) Character Set. Property(S): SqlSortId107 = Ukrainian dictionary order, case-sensitive, for use with the 1251 (Cyrillic) Character Set. Property(S): SqlSortId108 = Ukrainian dictionary order, case-insensitive, for use with the 1251 (Cyrillic) Character Set. Property(S): SqlSortId113 = Dictionary order, case-sensitive, for use with the 1253 (Greek) Character Set. Property(S): SqlSortId114 = Dictionary order, case-insensitive, for use with the 1253 (Greek) Character Set. Property(S): SqlSortId120 = Mixed dictionary order, for use with the 1253 (Greek) Character Set. Property(S): SqlSortId121 = Dictionary order, case-sensitive, accent-sensitive, for use with the 1253 (Greek) Character Set. Property(S): SqlSortId122 = Dictionary order, case-sensitive, accent-sensitive, for use with the 1253 (Greek) Character Set. Property(S): SqlSortId124 = Dictionary order, case-insensitive, accent-insensitive, for use with the 1253 (Greek) Character Set. Property(S): SqlSortId129 = Dictionary order, case-sensitive, for use with the 1254 (Turkish) Character Set. Property(S): SqlSortId130 = Dictionary order, case-insensitive, for use with the 1254 (Turkish) Character Set. Property(S): SqlSortId137 = Dictionary order, case-sensitive, for use with the 1255 (Hebrew) Character Set. Property(S): SqlSortId138 = Dictionary order, case-insensitive, for use with the 1255 (Hebrew) Character Set. Property(S): SqlSortId145 = Dictionary order, case-sensitive, for use with the 1256 (Arabic) Character Set. Property(S): SqlSortId146 = Dictionary order, case-insensitive, for use with the 1256 (Arabic) Character Set. Property(S): SqlSortId153 = Dictionary order, case-sensitive, for use with the 1257 (Baltic) Character Set. Property(S): SqlSortId154 = Dictionary order, case-insensitive, for use with the 1257 (Baltic) Character Set. Property(S): SqlSortId155 = Estonian dictionary order, case-sensitive, for use with the 1257 (Baltic) Character Set. Property(S): SqlSortId156 = Estonian dictionary order, case-insensitive, for use with the 1257 (Baltic) Character Set. Property(S): SqlSortId157 = Latvian dictionary order, case-sensitive, for use with the 1257 (Baltic) Character Set. Property(S): SqlSortId158 = Latvian dictionary order, case-insensitive, for use with the 1257 (Baltic) Character Set. Property(S): SqlSortId159 = Lithuanian dictionary order, case-sensitive, for use with the 1257 (Baltic) Character Set. Property(S): SqlSortId160 = Lithuanian dictionary order, case-insensitive, for use with the 1257 (Baltic) Character Set. Property(S): SqlSortId183 = Danish/Norwegian dictionary order, case-insensitive, uppercase preference, for use with 1252 Character Set. Property(S): SqlSortId184 = Swedish/Finnish (Phone) dictionary order, case-insensitive, uppercase preference, for use with 1252 Character Set. Property(S): SqlSortId185 = Swedish/Finnish (Standard) dictionary order, case-insensitive, uppercase preference, for use with 1252 Character Set. Property(S): SqlSortId186 = Icelandic dictionary order, case-insensitive, uppercase preference, for use with 1252 Character Set. Property(S): StdSku = 1 Property(S): UpgradeCode = {929C9FEC-8873-4A1A-A209-9AF432E8E1D1} Property(S): SqlPackageId = 1 Property(S): ProductName = Microsoft SQL Server 2005 Property(S): ProductNameSetup = Microsoft SQL Server 2005 Setup Property(S): RemoveFeatureList = SQL_Engine,SQL_Data_Files,SQL_Replication,SQL_FullText,SQL_SharedTools,SQL_BC_DEP Property(S): ROOTDRIVE = D: Property(S): ValidMOFInstanceName = 1 Property(S): PIDRET = 0 Property(S): DPID = ********** Property(S): PID = ********** Property(S): PIDSEQ = 271000003 Property(S): PKU = 0 Property(S): CCPTrigger = 2 Property(S): SqlPerfMonRegKey = SQLCTR Property(S): SqlSubDir = MSSQL Property(S): InstanceSubDir = MSSQL.1 Property(S): Namechecksum.7354AFCB_913B_4E9F_B76C_2376101FDE0C = Standard Edition Property(S): Namechecksum.CC1A8C58_27D1_4D38_BF1B_C0A5CBB90616 = Standard Edition Property(S): QuotedServiceGroupAgent.EAD22282_F1AF_4119_B1F9_C9F1DCBC62FF = IECDC-WIAS169SQLServer2005SQLAgentUser$IECDC-WIAS169$MSSQLSERVER Property(S): QuotedServiceGroupADHelper.2C8E638F_C982_4AA5_A173_7148A8E8649D = IECDC-WIAS169SQLServer2005MSSQLServerADHelperUser$IECDC-WIAS169 Property(S): QuotedServiceGroupSQLBrowser.879C8BDB_884A_4C3C_80C3_3452EA2B8439 = IECDC-WIAS169SQLServer2005SQLBrowserUser$IECDC-WIAS169 Property(S): QuotedServiceGroupSQLBrowser.03BE59F9_3DFA_413B_A99C_B95CA31A7BFE = IECDC-WIAS169SQLServer2005SQLBrowserUser$IECDC-WIAS169 Property(S): QuotedServiceGroupSQLBrowser.2FC2D269_8625_4826_BB3F_F9059090CB38 = IECDC-WIAS169SQLServer2005SQLBrowserUser$IECDC-WIAS169 Property(S): InstId = MSSQL.1 Property(S): PreviousInstId = MSSQL.1 Property(S): SqlLegacyRegPath = MSSQLServer Property(S): SqlOriginalMachineName = IECDC-WIAS169 Property(S): RSSqlPoolLimit = 150 Property(S): RSGUIDVALUE = {97ba1f98-43fe-42dd-8a0d-ff40868ebe16} Property(S): ProgramFilesFolder.D20239D7_E87C_40C9_9837_E70B8D4882C2 = C:Program Files Property(S): ModuleID_SQLBASE = D20239D7_E87C_40C9_9837_E70B8D4882C2 Property(S): SQLAUTOSTART = 1 Property(S): InstanceName.D20239D7_E87C_40C9_9837_E70B8D4882C2 = MSSQLSERVER Property(S): RSPREREQUISITECHECKED = 1 Property(S): SqlCOMPlusInstalled = 1 Property(S): SqlASPNETInstalled = 1 Property(S): ProgramMenuFolder.ConfigurationTools1033 = C:Documents and SettingsAll UsersStart MenuPrograms Property(S): SqlDefaultWebSite = /W3SVC/1 Property(S): SqlIISInstalled = 1 Property(S): IISCHECKED = 1 Property(S): SCMLocalServiceAccount = NT AUTHORITYLocalService Property(S): SCMNetworkServiceAccount = NT AUTHORITYNetworkService Property(S): PerformanceLogUsersGroup = BUILTINPerformance Log Users Property(S): PerformanceMontiorUsersGroup = BUILTINPerformance Monitor Users Property(S): DW20PATH_CPUTYPEX86 = X86 Property(S): QuotedComputerName = IECDC-WIAS169 Property(S): QuotedDefaultDomain = VF-IE Property(S): DW20PATH_X86.8D56D6B0_25DE_4471_A64F_717FC5AB6330 = C:PROGRA~1COMMON~1MICROS~1DWDW20.EXE Property(S): DefaultDomain = VF-IE Property(S): WindowsFolder.97F81AF1_0E47_DC99_FF1F_C8B3B9A1E18E = C:WINDOWS Property(S): SystemFolder.97F81AF1_0E47_DC99_FF1F_C8B3B9A1E18E = C:WINDOWSsystem32 Property(S): WindowsFolder.98CB24AD_52FB_DB5F_FF1F_C8B3B9A1E18E = C:WINDOWS Property(S): SystemFolder.98CB24AD_52FB_DB5F_FF1F_C8B3B9A1E18E = C:WINDOWSsystem32 Property(S): WindowsFolder.9BAE13A2_E7AF_D6C3_FF1F_C8B3B9A1E18E = C:WINDOWS Property(S): SystemFolder.9BAE13A2_E7AF_D6C3_FF1F_C8B3B9A1E18E = C:WINDOWSsystem32 Property(S): WindowsFolder.74FD3CE6_2A8D_0E9C_FF1F_C8B3B9A1E18E = C:WINDOWS Property(S): SystemFolder.74FD3CE6_2A8D_0E9C_FF1F_C8B3B9A1E18E = C:WINDOWSsystem32 Property(S): WindowsFolder.66332652_9C28_58B1_FF1F_C8B3B9A1E18E = C:WINDOWS Property(S): SystemFolder.66332652_9C28_58B1_FF1F_C8B3B9A1E18E = C:WINDOWSsystem32 Property(S): WindowsFolder.63E949F6_03BC_5C40_FF1F_C8B3B9A1E18E = C:WINDOWS Property(S): SystemFolder.63E949F6_03BC_5C40_FF1F_C8B3B9A1E18E = C:WINDOWSsystem32 Property(S): WindowsFolder.68B7C6D9_1DF2_54C1_FF1F_C8B3B9A1E18E = C:WINDOWS Property(S): SystemFolder.68B7C6D9_1DF2_54C1_FF1F_C8B3B9A1E18E = C:WINDOWSsystem32 Property(S): WindowsFolder.D2730D3F_3C41_5884_FF1F_C8B3B9A1E18E = C:WINDOWS Property(S): SystemFolder.D2730D3F_3C41_5884_FF1F_C8B3B9A1E18E = C:WINDOWSsystem32 Property(S): ACTION = INSTALL Property(S): Preselected = 1 Property(S): UILevel = 2 Property(S): ServicePrefixRS.6080319C_1466_426E_9E7A_1DD555143E0A = SQLServer2005ReportServerUser$IECDC-WIAS169$ Property(S): ServicePrefixSSIS.6080319C_1466_426E_9E7A_1DD555143E0A = SQLServer2005DTSUser$IECDC-WIAS169 Property(S): OriginalDatabase = D:MSMSQLServer2005ServersSetupSqlRun_SQL.msi Property(S): DATABASE = C:WINDOWSInstallerd5f48.msi Property(S): Privileged = 1 Property(S): RedirectedDllSupport = 2 Property(S): MsiWin32AssemblySupport = 5.2.3790.1830 Property(S): MsiNetAssemblySupport = 2.0.50727.42 Property(S): Date = 22/02/2007 Property(S): Time = 15:34:23 Property(S): TTCSupport = 1 Property(S): ColorBits = 32 Property(S): TextHeight = 16 Property(S): BorderSide = 1 Property(S): BorderTop = 1 Property(S): CaptionHeight = 19 Property(S): ScreenY = 768 Property(S): ScreenX = 1024 Property(S): SystemLanguageID = 6153 Property(S): ComputerName = IECDC-WIAS169 Property(S): UserLanguageID = 6153 Property(S): UserSID = S-1-5-21-1275210071-484763869-725345543-115600 Property(S): LogonUser = manncol_srvadm Property(S): AdminUser = 1 Property(S): VirtualMemory = 7379 Property(S): PhysicalMemory = 3928 Property(S): SystemFolder.60A85CA1_D9D8_43FA_9DD5_574BEF970F9F = C:WINDOWSsystem32 Property(S): Intel = 15 Property(S): ShellAdvtSupport = 1 Property(S): OLEAdvtSupport = 1 Property(S): GPTSupport = 1 Property(S): FontsFolder = C:WINDOWSFonts Property(S): ModuleID_SQLBRWS = 2FC2D269_8625_4826_B
While I am trying to install SQL server 2005 I get the following message - "Machine does not have a product that matches the installation package". The installation does not occur.
I am using Windows 2000 Professional SP4 and using 32 bit installer - SQLServer2005SP2-KB921896-x86-ENU.exe
Hello,I received the error message below when i'm trying to install SQLServer 2000 standard edition into a Windows 2000 Professionaleworkstation.Error :Microsoft SQL server 2000 Standard Edition server components is notsupported on this operating system. Only client components will beavailable for installation.Any request modification ?Best regards,Thanks
I am trying to install microsoft sql server 2000 enterprise edition on a windows 2000 advance server. I keep getting error message
A previous program installation created pending file operations on the installation machine. You must restart the computer before running . I have restarted machine and no change.
What does error message mean and what is solution?
Recently, I found a bug in Microsoft's official SQL Server2000 JDBC driver. It seemed to lie in the Statement's setDate() method. Maybe they simply assumed all date are represented in 12-hours format. The test code is below:
public void testMisc() throws Exception { Connection conn = TransactionManager.getConnection(); String sql = "select count(salescheck0_.ID) as x0_0_ " + "from T_CHK_OUT_BILL_TEST salescheck0_ " + "where (salescheck0_.EX_TIME>?)" + "and(salescheck0_.EX_TIME<?)"; PreparedStatement stmt = conn.prepareCall(sql); SimpleDateFormat sdf = new SimpleDateFormat("yyyy-MM-dd HH:mm:ss"); Date timefrom = sdf.parse("2004-04-02 00:00:00.000"); Date timeto = sdf.parse("2004-04-02 23:00:00.000");
Given the code and data, the expected output ought to be "count = 19" But it's "count = 19" instead. However, if you set date by using alternative method like the commented statements, you can get the correct result.
Does anybody know if there exists any patch? Could we expect Mircosoft to fix this bug? If so, where could I submit this bug report?
hi all,I am trying to create a dts package to transfer data from tables in mysql server 2000 database to a db2 UDB v8.1.4 database. When I use ibmdb2 oledb driver for the destination this works fine except that rowsare committed on a row by row basis thus performance is slow. I wantto use the odbc driver but when I define it as the destination, i geterrors saying that the maximum number of rows failed has exceeded theminimum.Does anybody know what to do in order to get the transfer workingusing ibm db2 odbc as the datasource?ThanksLyn
I'm using JDBC driver for Server 2005 (version 1.1.1501) to access Server 2000. I have no problems reading my data, but every update returns "Cursor is READ ONLY".
If I use driver for Server 2000 I have no problems. And I have no problems running the same program with 2005 driver against SQL Server Express.
I am getting the error message as "DIAG [00000] [ODBC Access Driver 52.1.150.0] -26 Driver not capable (-26)" at the time of retrieving the catalog infromation by SqlTables methode. it is shown "?" as catalogname but this not supported by odbc access driver. can you please help out how can i resolve using C++ code in SqlTables methode.
We have encountered a major SQLServer 2000 bug. I would like to find out whether anyone has seen this or whether there are work around. We are using SQLServer 2000 Standard Edition running on Windows 2000 Server.
Here is the problem. We have a main SP that calls several long SPs (1000+ lines in each SP) to migrate data from one SQL2000 server to another SQL2000 server. (Both database servers are within the same PC.) The bug occurs in the main SP. It skips a specific SQL statement (which is a call to a SP). There is nothing unique about this SQL statement because the same statement in other parts of the same SP works. This bug occurs consistently. We were able to trace it by putting PRINT statements around this SQL statement and inside the calling SP. We also tried to trace it using the Query Analyzer's Debug with a strange behavior. It seems like the Debugger has a line shifted in it's memory (lines are displayed fine.) This shift occurs a few statements before the Problematic Line. We observe this by trying to put a break point on a valid SQL statement. But the red dot actually shows on a comment line right after the intended line. It does not Step Into the Problematic Line (which is a call to a SP). Note that when we run small SPs, this behavior does not show up. Everything works fine for small SPs.
Hi.. ASP I want to install SQL SERVER 2000 on XP..But is it only support for client version.Is there any Service Pack for XP about SQL SERVER 2000 for server version. I have already install XpServicePack2 but problem is still remain. Thanks & RegardsRavinder Sharma
hi, I have tried to install sql server 2000 in win 98. I was not able to do so. I used to install sql server 7.0 in win 98. The Question, is is the new version (2000) does not allow to install in win 98.
I've MS SQL Server 6.5 installed in my Windows 2000 machine. Is it possible to install MS SQL Server 2000 personal or standard edition in the same machine without upgrading or removing the old SQL Server 6,5 ?
HiI am trying to find out best practices for SQL Server 2000 installsfor corporate servers. We currently have someone doing it 'in theirspare time!' (I kid you not). When installing SQL server 2000 out ofthe box on a freshly formatted machine, I would like to get somefeedback on the following:1) I believe the 'sa' account should be removed at earliestopportunity, after install.2) Should there be any processes running under the 'sa' account is themachine was correctly configured to use a domain account principle? Iwas under the impression that this was not the case?Any links to information on best practices would be appreciated.Regards,Mitch
I just installed SQL Server 2000 Developers edition on my computer. After installation I tried to create a simple table which I was unable to do. When I attempted to create the table, I went into SQL Server Enterprise Manager and under Console Root I extended / Microsoft SQL Servers / SQL Server Group / (local) Windows NT when it gave me the following 2 message box errors :
----------------------------------------------------------------------------------- An error 1069-(The service did not start due to login failure)occured while preforming this server operation on the MSSQL service.
---and---
A connection could not be established to (local).
Reason: SQL Server does not exist or access denied. ConnectionOpen(Connect()).
Please verify SQL Server is running and check your SQL Servier registion properties(by right- clicking on the (local) node) and try again.
I have Windows XP Professional and currently run IIS. I have tried re-registering without success and at this point I don't know what I need to do in order to correct these errors and create a simple table.
Hi, I'm learning ASP.net and I just bought Visual Studio .net professional. I tried to install MS SQL server 2000 on my two computers. One OS is windows server 2003 standard edition and another is Win XP professional. Both of them appeared SQL Server Upgrade Wizard "from server 6.5 upgrade to server 2000". I don't think I have server 6.5 installed and there is no server 6.5 application interface to run the server. What's the problem? I cannot run the Wizard successfully. Can I just ignore it?Thank you,William
I installed sql server 2000 sp2 standard edition on Windows 2003, when installing, it said "This version is not supported on this os", but I was told to continue installing the software and that I could install the latest security patches to bring it up to date. Will that work? Do I need to do anything else? SQL Server 2000 is up and running on the box. When running the statement " select @@version" it informed me that I was at 8.00.194 patch level. How can I tell if SQL Server 2000 is 32 or 64 bit? I was trying to download the lasted patch and it asked for that info. Thanks.-- New to SQL Server
I just wanted to get the advice.I have a sql server2000 installed on Windows 2000 advanced server machine in my company using windows authentication.I wanted to install another instance of this sql server on remote sites located in other country where the domain name and everything changes.I wanted to use the same existing schema there in new site.Can i import this database there and create new users of new domain using this .
I HAVE INSTALLED WINDOWS SERVER 2003 R2 + SP2 STANDARD 64 BIT. CAN I INSTALL SQL SERVER 2000 32 BIT STANDARD +SP4 ON IT.PLEASE HELP ME REGARDS SELVARAJ
I was wondering if anyone might be able to help me here. To be honest, this is my first time i have encountered SQL Server 2000 SP4. I need some guidance as to how to install and set up the SQL Server 2000 SP4. I have done it with SQL Server 2005 Express Edition and it's (I think) a lot easier to install and get it going.
My computer runs on windows XP Pro (windows 32bit). I got confused when i got to the following microsoft webpage - http://www.microsoft.com/downloads/details.aspx?FamilyID=8e2dfc8d-c20e-4446-99a9-b7f0213f8bc5&DisplayLang=en. I downloaded SQL2000-KB884525-SP4-x86-ENU.EXE. And when running the setup.bat, the message came up saying "SQL Server 2000 is not installed on this machine. setup will now exit". What do i need to have the SQL Server 2000 installed on my machine?
There are two sql servers with the same database in different locations with replication running on them. Users in the two locations insert or update date on there own database through an ms access application . The data are replicated to both servers. Someone wanted a copy of the database and they dropped replication, but users continue to modify and add data on both servers and so replication could not be back again without merging the two databases as one again and restarting replication. My job was to merge the databases and make replication work and after allot of work all is fine. I copy and attached the database on my pc that I set up as a server and did the job. Then I went back on both servers that had replication running before I attached the database and set the subscriber and publisher and all was fine to that point. The database has six groups with permissions on them and many database users on each location. Both the groups and the users show on the database. I create a new login and user and I add him to the groups to get the permissions. Now back on a user pc I login with the new user name run the ms access application and try to add some new records, but I get errors that I cannot insert null values to two of the fields in several tables in the database. This was not happening before and the database was recording the values in those fields namely the user name and the date that the new record was created. After some reading I found out that I might need to set the groups and permissions on the views and tables from the beging but Im not an expert. Any ideas? Thanks allot George
i have recently formated my laptop, and ever since i can't get SQL Server 2000 running correcly
The install seems to go ok, but when i open Enterprise Manager, and select databases, theres nothing there and i get an error saying the connection has stopped
When i try to install Service Pack 3 i get the following error:
Error running script: sp3_serv_uni.sql(1)
does any 1 know what this means
i've uninstalled many times but i still get the same errors
