How would amend the following so that if one or both variables were NULL the result would default of ALL (everything)for that variable
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER FUNCTION [dbo].[InLnFncSchool]
(
@School nvarchar(100) =NULL,
[Code] ....
Hi,I have a query like this :SELECTx1,x2,( SELECT ... FROM ... WHERE ...UNIONSELECT ... FROM ... WHERE ...) as x3FROM ...WHERE ...The problem is that I don't want to return the results where x3 isNULL.Writing :SELECTx1,x2,( SELECT ... FROM ... WHERE ...UNIONSELECT ... FROM ... WHERE ...) as x3FROM ...WHERE ... AND x3 IS NOT NULLdoesn't work.The only solution I found is to write :SELECT * FROM((SELECTx1,x2,( SELECT ... FROM ... WHERE ...UNIONSELECT ... FROM ... WHERE ...) as x3FROM ...WHERE ...) AS R1)WHERE R1.x3 IS NOT NULLIs there a better solution? Can I use an EXISTS clause somewhere totest if x3 is null without having to have a 3rd SELECT statement?There's probably a very simple solution to do this, but I didn't findit.Thanks
View 7 Replies View Related
What does it mean "select null"?
Is null meant nothing?
Thanks.
Code Snippet
select null
from(
select e.empno,e.ename,e.job,e.mgr,e.hiredate,
e.sal,e.comm,e.deptno,count(*) as cnt
from emp e
How can I do a null to 0 in a select statement? I tried the NZ() function but it is not part of SQL.
Thanks very much,
hi,
i have the following query to sum the total due balance for a customer:
select sum(outstanding)from out where customer = 'myvariable' the problem is when the customer has no outstanding it returns NULL is there a way to return 0 when there are no outstanding?
thanks
I am using a bcp command to cretae a text file.
set @bcpcommand = 'bcp "select med + replicate('' '',10-datalength(med)),ml+ replicate('' '',20-datalength(ml)),iname + replicate('' '',10-datalength(iname)) from copy_tbl" queryout "'+ @filename + '" -U -P -c'
exec master..xp_cmdshell @bcpCommand
Some of the values in the select statement are Null values and are getting skipped in the text file .My output looks like
At A02 At1E
AtE A03 At2E
c100 c1230
I want them to allign but the third row has a null in the middle so it skips it and put the third value in the seconds place
Here is the problem that I am struggling with. The structure is:
States: StateID, StateName
Counties: CountyID, CountyName
Cities: CityID, CityName
Zips: Zip, StateID, CountyID, CityID
Regions: RegionID, RegionName
Region_Data: RegionID, StateID, CountyID, CityID
The thing about the region is that it can be defined by states only, in which case CountyID and CityId are NULL, can be defined by Counties too, in which case only CityID is NULL or it can be defined up to City level, in which case all 3 are set to something. Example, Northeast would be all cities from northeast, but Pocono would be just some counties in PA, and so on...
The issue is now selecting all cities that belong into a region... Normally I would join the Zips table with the Region_Data table and retrieve all CityIDs... The issue is that, as I said, the CountyID and CityID might be null for some records, so I am not sure how to retrieve them?
I came up with one idea in which I create 3 temporary tables and I select in them all the records that have 1) only state, 2) only state and county, 3) all 3, then I join each and I union the results...
But I am wondering if there is a way to do the select in one shot?
Any idea? I appreciate your help,
Thank you,
Iulian
Regards,
Iulian
hi, i have 5 columns in my table
name age phone sex salary
dani 21 1233 m
see this output, there salary is null.
actually i want to use * (ie)
select * from emp, if i use this the following output has to come
name age phone sex
dani 21 1233 m
becos there is no value in salary column.
so please tall me how to do this,please give me query to do this.
I have the following problem:
Source Table
ArtNr
F1
F2
F3
1044
Eigenmarke
NULL
NULL
1044
NULL
Altmarken
NULL
1044
NULL
NULL
Blanko
Desired output after SQL select:
ArtNr
F1
F2
F3
1044
Eigenmarke
Altmarken
Blanko
How can I achieve a easy solution?
Hello everybody,
I have following datasource
<asp:SqlDataSource ID="sqlIncidentTemplates" runat="server" ConnectionString="<%$ ConnectionStrings:Standard %>"
SelectCommand="SELECT [IncidentText] FROM [IncidentTemplates] WHERE [ConstrAreaID] = @ConstrAreaID AND [ConstrDeviceID] = @ConstrDeviceID">
<SelectParameters>
<asp:Parameter DefaultValue="" Name="ConstrAreaID" Type="Int32" ConvertEmptyStringToNull="true" />
<asp:Parameter DefaultValue="" Name="ConstrDeviceID" Type="int32" ConvertEmptyStringToNull="true" />
</SelectParameters>
As far as I understand default select command should be "SELECT IncidentText FROM IncidentTemplates WHERE ConstrAreaID IS NULL AND ConstrDeviceID IS NULL". Unfortunately this is not the case. I assume that the "[ConstrAreaID] = @ConstrAreaID " is translated into "ConstrAreaID = NULL".
Could this be the reason and how can I solve this problem?
Thanks in advance
Hi.
I have an sql table which contains a number and a name. I would like to create a select statement that will display these two fields in the format :
"number | name", but if there is a null value in the number it will display only the name and vice versa.
How can I do it ?
Any help is appreciated.
I am working on some data that is JOINing to another table. Not a big thing. In the child table, there are different values for a single ID. I want to be able to select the Max ColorID that is Not Null, for each distinct CarID. The CarID is what I am joining the other table with. I need selecting the distinct row with the Max ColorID that is not Null. All this data is made up, so nothing looks logical in the design.
DECLARE @ColorList TABLE
(
CarID float
, ColorID int
)
INSERT INTO @ColorList
SELECT 1.55948815793043E+15, 9 UNION ALL
SELECT 1.55948815793043E+15, 27 UNION ALL
[code]....
So this would be the resultset:
1.55948815793043E+15, 27
1.62851796905743E+15, 27
1.51964586107807E+15, 9
1.55948815793043E+15, 27
1.47514023011517E+15, 5
1.64967408641916E+15, 27
1.51964586107807E+15, 9
1.56103326128036E+15, 27
1.49856249351719E+15, 9
1.5736407022847E+15, 6
1.64664602022073E+15, 27
1.51964244007807E+15, 27
I'd like to be able to offer the option of selecting a project by the ProjectID number, and if a projectID is not supplied then the default result set would be select * from tbl_Projects.
ALTER PROCEDURE [USP_SelectProject]
-- Add the parameters for the stored procedure here
@ProjectNumber as int
AS
BEGIN
[code]....
Suppose I have added a xyz bit column in mytable. From now onwards new values inserted in mytable will have 0 or 1 in xyz column but the values that were previously stored will have NULL value in xyz column.
Now I want to write a query in which I will not give xyz parameter always like it can be null or value.
select * from mytable
where class='something'
and xyz is null
or
select * from mytable
where class='something'
and xyz = 1
Now how to write same query for both cases.
I am obviously a newbie to SQL Server but have been using Access for years and I have come up against what appears to be an age old issue concerning nulls and specifically the functions to test for them etc.
Below is the Access Query I am having difficulty with...
----------------------------------------------------------
SELECT DISTINCT Max(tbl_ScheduleDate.SchDate) AS CurrentDate, ([SchDate],"mmmm yyyy") AS MonthYear, tbl_Schedule.Area, tbl_Schedule.CP, IIf(IsNull(tbl_tmp_CP.CPID),"Not Uploaded","Uploaded") AS Loaded
FROM (tbl_Schedule INNER JOIN tbl_ScheduleDate ON tbl_Schedule.MaxMinID = tbl_ScheduleDate.MaxMinID) LEFT JOIN tbl_tmp_CP ON tbl_Schedule.CP = tbl_tmp_CP.CP
GROUP BY Format([SchDate],"mmmm yyyy"), tbl_Schedule.Area, tbl_Schedule.CP, IIf(IsNull(tbl_tmp_CP.CPID),"Not Uploaded","Uploaded"), tbl_ScheduleDate.SchDate, tbl_tmp_CP.CPID;
-------------------------------------------------------------
Ignore the Format() function as I know this is a problem and have a fix.
The problem is this field...
IIf(IsNull(tbl_tmp_CP.CPID),"Not Uploaded","Uploaded") AS Loaded
I am testing to see if data is loaded into table 'tbl_tmp_CP' that is related to 'tbl_Schedule' by checking if there is a null value or not and then adding the right response string value to a column called Loaded.
Can anyone suggest a way for me to do the above?
Here's what I have and it's not working.
Code Block
SELECT [userID],
CASE
WHEN [mdlName] = NULL AND [mdnName] = NULL THEN [lstName] + ', ' + [fstName]
WHEN [mdlName] <> NULL AND [mdnName] <> NULL THEN [lstName] + ', ' + [fstName] + ' ' + [mdlName] + ' ' + [mdnName]
WHEN [mdlName] <> NULL AND [mdnName] = NULL THEN [lstName] + ', ' + [fstName] + ' ' + [mdlName]
WHEN [mdnName] <> NULL AND [mdlName] = NULL THEN [lstName] + ', ' + [fstName] + ' ' + [mdnName]
END AS [Full Name]
FROM [grUser]
ORDER BY [Full Name] ASC
The [Full Name] is always null. Any idea why? What I'm trying to do is if mdlName (middle name) and mdnName (maiden name) is null then display the lstName (last name) and fstName (first name) only and so on.
Any help is much appreciated.
I have a stored procedure which accepts 3 arguments that are used in the WHERE clause of a SELECT Statement
CREATE PROCEDURE [dbo].[MyProcedure] @argYear INT, @argMonth INT, @argDay INT
AS
SELECT *
FROM MyData
WHERE
MyData.Year = @argYear AND MyData.Month = @argMonth AND MyData.Day = @argDay
The problem that I am having is @argDay is an "optional" argument. If @argDay is NULL then I want to basically ignore the "AND MyData.Day = @argDay" condition.
Is there an easier way to do this than:
IF @argDay is NULL
SELECT *
FROM MyData
WHERE
MyData.Year = @argYear AND MyData.Month = @argMonthELSE
SELECT *
FROM MyData
WHERE
MyData.Year = @argYear AND MyData.Month = @argMonth AND MyData.Day = @argDay
END IF
Thanks
Hi All,
I use a parameter for product type in my report so that end user can select different product types from a drop down menu. Now my problem is that for some fields product type is blank(NULL). But end user can not see these NULL value when he click drop down menu. I can not use Allow Null value option in report paramter , because I have used multi value option.
Is there any other way to select these NULL values?
Thanks
Hey. I need to substitute a value from a table if the input var is null. This is fine if the value coming from table is not null. But, it the table value is also null, it doesn't work. The problem I'm getting is in the isnull line which is in Dark green color because @inFileVersion is set to null explicitly and when the isnull function evaluates, value returned from DR.FileVersion is also null which is correct. I want the null=null to return true which is why i set ansi_nulls off. But it doesn't return anything. And the select statement should return something but in my case it returns null. If I comment the isnull statements in the where clause, everything works fine. Please tell me what am I doing wrong. Is it possible to do this without setting the ansi_nulls to off??? Thank you
set ansi_nulls off
go
declare
@inFileName VARCHAR (100),
@inFileSize INT,
@Id int,
@inlanguageid INT,
@inFileVersion VARCHAR (100),
@ExeState int
set @inFileName = 'A0006337.EXE'
set @inFileSize = 28796
set @Id= 1
set @inlanguageid =null
set @inFileVersion =NULL
set @ExeState =0
select Dr.StateID from table1 dR
where
DR.[FileName] = @inFileName
AND DR.FileSize =@inFileSize
AND DR.FileVersion = isnull(@inFileVersion,DR.FileVersion)
AND DR.languageid = isnull(@inlanguageid,null)
AND DR.[ID]= @ID
)
go
set ansi_nulls on
Hi there ;
This Problem is goin to make me crazy!
I've got a table with couple of fields, 2 of them are DateTime, in Sql Express 05 .
I used asp.net 2.0 to insert datetime values, directly, using sth like DateTime.Now.ToString() .
i use 2 selects as follows :
1)select * from X where Date1='8/9/2006 11:17:41 AM'
2)select * from X where Date2='8/9/2006 11:17:41 AM'
#1 is OK, but the second one returns a row with all columns set to NULL .
(X is the name of the table)
Thanks in advance
Hi, how do i do a select statement with asp.net to return a record if a field is null. I have the following code:
SqlCommand cmd = new SqlCommand("SELECT * FROM Categories WHERE ParentId = @ParentId", cn);.Parameters.Add("@ParentId", SqlDbType.Int).Value = parentId != null ? (object) parentId : DBNull.Value;cn.Open();
The variable parentId is a nullable int. However when i pass in a null value it doesn't return anything even though there are records in the database that have a null value for the ParentId field.
Appreciate if someone could tell me what i am doing wrong. Thanks
The problem I'm having is described below all this code.---------------------------------------------------------My content page has a SqlDataSource: <asp:SqlDataSource ID="sqlGetUserInfo" runat="server"
ConnectionString="<%$ ConnectionStrings:RemoteNotes_DataConnectionString %>" SelectCommand="SELECT [UserFirstName], [UserLastName] FROM [Users] WHERE ([UserGUID] = @UserGUID)"
onselecting="sqlGetUserInfo_Selecting"> <SelectParameters> <asp:Parameter Name="UserGUID" Type="String" /> </SelectParameters> </asp:SqlDataSource> -----------------------------------------------------Inside my OnSelecting event, I have: protected void sqlGetUserInfo_Selecting(object sender, SqlDataSourceSelectingEventArgs e) { sqlGetUserInfo.SelectParameters["UserGUID"].DefaultValue = Membership.GetUser().ProviderUserKey.ToString(); } ---------------------------------------------------------------------And, inside my Page_Load, the relevant code is: //String strUserFirstName = ((DataView)sqlGetUserInfo.Select(DataSourceSelectArguments.Empty)).Table.Rows[0]["UserFirstName"].ToString();
DataView dvUserDetails = (DataView)sqlGetUserInfo.Select(DataSourceSelectArguments.Empty);
if ((dvUserDetails != null) && (dvUserDetails.Count > 0)) { DataRow drUserInfo = dvUserDetails.Table.Rows[0]; lblHelloMessage.Text = "Hello, " + drUserInfo["UserFirstName"].ToString() + ((drUserInfo["UserLastName"].ToString() == "") ? "" : " " + drUserInfo["UserLastName"].ToString()); } ---------------------Now, here's the problem. My "if" statement is never executing because "dvUserDetails" is null. However, when I break the execution and put awatch on the actual Select() statement, it shows a DataView with the correct return rows! You can see the commented line where I tried tobypass the DataView thing (just as a test), but I get an object reference is null error.The weird thing is that it was working fine one minute, then started getting "funky" (working, then not, then working, then not), and now it just doesn't work at all. All thiswithout me changing one bit of my code because I was checking out some UI flow and stopping and restarting the application. I've tracked downthe temporary files directory the localhost web server runs from, deleted all those files, and cleaned my solution. I've even triedrebooting, and nothing seems to make it work again.My relevant specs are VS2008 9.0.21022.8 RTM on Vista Enterprise x64.
Hello,I'm a beginner in SQL and I have been searching through the SQL Cookbook and Google but I can't seem to find an example of what I want to do. I want to create a report that will return names and emails using two of my tables. I want to use the email in my primary table in the select but if it is null or empty I want to replace it with an email from my secondary table. Below is what I would like to do but I got a syntax error with it in SQL Server 2000. SELECT MemberID As ID, MemberFirstName As FirstName, MemberLastName As LastName, (IF MemberEmail = '' THEN SELECT TOP 1 OtherEmail FROM OtherTable WHERE OtherID = MemberID) As EmailFROM PrimaryTableThanks for your time.Jason
View 8 Replies View RelatedHi:
I used this statement, select * from table1 where date1 = null, in SQL Query window and got a few records back. Now, I used the same statement in my VB 5 code and no record is found. How do I select all the records in table1 which do not have values in field date1? Thanks for the help.
-Nicole-
Hi, I need to build a query that just includes certain columns if they haven't NULL row values.For example:SELECT NAME_COLUMN IF not NULL, SELECT GENDER_COLUMN if not NULL, otherwise won't select these 2 columns i used as example.Any help, will be greatly appreciated,Best regards,Teixeira
View 3 Replies View RelatedI have a table with 3 fields. when I type
select * from test -- I am getting the results as below.
NAME AGE DEPT
AAA 23 AOD
BBB 27 NULL
CCC NULL NULL
DDD 23 POD
DEPT,AGE are displayed with "NULL" WHEN THERE IS NO value for that field . How can I eliminate this. I need space instead of NULL. When I export to text file there also contains NULL. Let me know how can I eliminate this.
Thanks in advance
Been trying to come up with a query to filter-down my sample set intodistinct records. For instance, lets say column1 is a sample set,column2 is the parameter, and column3 is a name and column4 is a type(lets also say there is a fifth column (id) that is an id). What Ineed is one record per type per sample only if type is given, if not,then return that record as well.I've used a subquery to get as close to the desired query is aspossible:select * from table1where id in (select min(id) from table1where column1="A"group by column1, column2)Here's an example of all data for sample "A":1 2 3 4----------A 1 X PA 1 Y PA 1 Z PA 2 WA 3 WA 4 T PA 5 U PA 6 V PA 7 TA 7 UA 7 VI want output :1 2 3-------A 1 X PA 2 WA 3 WA 4 T PA 5 U PA 6 V PA 7 TA 7 UA 7 VExcept the above query will exclude the last two records becausecolumn3 is not 'grouped by'.Basically I need to reduce any 'range' of records per sample (columna) where column4 is not null (ie = 'P'), to only one record andkeeping all others. Thanks in advance:-B
View 6 Replies View RelatedHello everyone,
I have a little problem here. I need to select data from multiple columns and multiple tables, some of those columns can have NULL value. I have tried few things, and havent find the right way so far. Problem that i am incountering is that when i run SELECT statment as it is right now, i dont get back results which match search parameters but have NULL value in one or more column in select statment. How can i fix this problem?
SELECT Person2role.person2roleID,Person.firstname, Person.lastname, Person.sex
FROM Person LEFT OUTER JOIN
Person2Role ON Person.personID = Person2Role.personID
WHERE (Person.firstname LIKE '%' + ISNULL(@firstname + '%', ''))
AND (Person.lastname LIKE '%' + ISNULL(@lastname + '%', ''))
AND (Person.sex = ISNULL(@sex, Person.sex))
This is a part of SELECT statment..just so you can get the idea of what i am doing..i have few more parameters
I am working with SQL Server 2005 Express Version
Thank you,
Alex
I cannot in the life of me understand what goes wrong here... In a webapplication (C#.NET) I traced an inability to retrieve existing records to SQL Server, where I cannot do the same either. The problem is that in the parameterized query, some fields can be null, and thus when the corresponding fields in the database record are null also, they should be selected. But this won't happen for some reason.
I wrote a test SQL statement that gives me the same bogus:
DECLARE @institution int, @collection int, @serialnr int, @subnr nvarchar(50)SET @institution = 1 SET @collection = 1SET @serialnr = 240 SET @subnr = NULLSELECT ID, Institution, Collection, SerialNumber, SubNumber, AccessionYear, Sagsnummer, DanekraeNr, TaxonIdentified, Stratigraphy, TypeStatus, PlacementRoom, PlacementCabinet, PlacementDrawer, UnitNotesFROM SpecimensWHERE (Institution = @institution) AND (Collection = @collection) AND (SerialNumber = @serialnr) AND (SubNumber = @subnr)
Now there is at least one row with corresponding fields values (1, 1, 240, null), but it won't be selected! What is wrong!?
I am creating a view and want to select records where the value of a Customer field (Klant Test Plan) is NULL or has exact the same value as for example customer field 2 (Klant Schedule).
I have already the code below:
SELECT DISTINCT
TOP (100) PERCENT dbo.Product.ERPKey, dbo.TestPlan.CoA, dbo.TestMethod.WorkInstruction, dbo.Customer.Name AS [Klant Testplan],
Customer_1.Name AS [Klant Schedule], LEFT(dbo.ShopFloor.ShopFloorNumber, 7) AS Schedule,
CASE WHEN Customer_1.Name = 'ItsMe BV' THEN Customer.Name ELSE Customer_1.Name END AS Customer
FROM dbo.Customer AS Customer_1 INNER JOIN
[Code] ....
I have a stored procedure with a SELECT statement, that retrieves 1 row.
SELECT name FROM tblNames WHERE nameID = "1"
I want all the NULL values in that row to be change in some default values.
How do I do this?
Hello! I have a field "End" in my database that is mapped as DateTime and allows nulls. Now I want to do a SQL-Select (in a SqlDataSource) like SELECT * FROM My_Table Where (([End] = @EndDate) OR ([End] = null)) @EndDate is a valid DateTime, but the second OR condition doesn't work. What is the best way to check if the [End]-field is empty or null? Thank you very much!
View 1 Replies View RelatedIf I try to run the code below, and even one of the values in the INNER
JOIN statements is NULL, the DataReader ends up with zero rows.
What I need is to see the results even if one or more of INNER JOIN
statements has a NULL value. For example, if I want info on
asset# 2104, and there's no value in the DriverID field, I need the
rest of the data to display and just have the lblDriverName by
blank. Is that possible?
<code>
Sub BindSearchGrid()
Dim searchUnitID As String
Dim searchQuery As String
searchUnitID = tbSearchUnitID.Text
lblIDNum.Text = searchUnitID
searchQuery = "SELECT * FROM Assets " & _
"INNER JOIN Condition ON Condition.ConditionID = Assets.ConditionID " & _
"INNER JOIN Drivers ON Drivers.DriverID = Assets.DriverID " & _
"INNER JOIN Departments ON Departments.DepartmentID = Assets.DepartmentID " & _
"INNER JOIN AssetCategories
ON AssetCategories.AssetCategoryID = Assets.AssetCategoryID " & _
"INNER JOIN Store ON
Store.[Store ID] = Assets.StoreID WHERE RTRIM(Assets.[Unit ID]) = '"
& searchUnitID & "'"
Dim myReader As SqlDataReader
myReader = Data.queryDB(searchQuery)
While myReader.Read
If
Not IsDBNull(myReader("Store Name")) Then lblStrID.Text =
myReader("Store Name")
If
Not IsDBNull(myReader("AssetCategory")) Then lblAsstCat.Text =
myReader("AssetCategory")
If
Not IsDBNull(myReader("Condition Description")) Then lblCondID.Text =
myReader("Condition Description")
If
Not IsDBNull(myReader("DepartmentName")) Then lblDepID.Text =
myReader("DepartmentName")
If
Not IsDBNull(myReader("Unit ID")) Then lblUnID.Text = myReader("Unit
ID")
If
Not IsDBNull(myReader("Year")) Then lblYr.Text = myReader("Year")
If
Not IsDBNull(myReader("Make")) Then lblMk.Text = myReader("Make")
If
Not IsDBNull(myReader("Model")) Then lblMod.Text = myReader("Model")
If
Not IsDBNull(myReader("Mileage")) Then lblMile.Text =
myReader("Mileage")
If
Not IsDBNull(myReader("Vin Number")) Then lblVinNum.Text =
myReader("Vin Number")
If
Not IsDBNull(myReader("License Number")) Then lblLicNum.Text =
myReader("License Number")
If
Not IsDBNull(myReader("Name")) Then lblDriverName.Text =
myReader("Name")
If
Not IsDBNull(myReader("DateAcquired")) Then lblDateAcq.Text =
myReader("DateAcquired")
If
Not IsDBNull(myReader("DateSold")) Then lblDtSld.Text =
myReader("DateSold")
If
Not IsDBNull(myReader("PurchasePrice")) Then lblPrPrice.Text =
myReader("PurchasePrice")
If
Not IsDBNull(myReader("NextSchedMaint")) Then lblNSM.Text =
myReader("NextSchedMaint")
If
Not IsDBNull(myReader("GVWR")) Then lblGrVWR.Text = myReader("GVWR")
If
Not IsDBNull(myReader("GVW")) Then lblGrVW.Text = myReader("GVW")
If
Not IsDBNull(myReader("Crane Capacity")) Then lblCrCap.Text =
myReader("Crane Capacity")
If
Not IsDBNull(myReader("Crane Certification")) Then lblCrCert.Text =
myReader("Crane Certification")
If
Not IsDBNull(myReader("Repair Cost")) Then lblRepCost.Text =
myReader("Repair Cost")
If
Not IsDBNull(myReader("Estimate Replacement")) Then lblEstRep.Text =
myReader("Estimate Replacement")
If
Not IsDBNull(myReader("SalvageValue")) Then lblSalVal.Text =
myReader("SalvageValue")
If
Not IsDBNull(myReader("CurrentValue")) Then lblCurVal.Text =
myReader("CurrentValue")
If
Not IsDBNull(myReader("Comments")) Then lblCom.Text =
myReader("Comments")
If
Not IsDBNull(myReader("Description")) Then lblDesc.Text =
myReader("Description")
End While
End Sub</code>