Select Case Statement

Aug 12, 2005

Hi,

I'm wondering what syntax to use for a select case statement.

I have a list of questions. If a particular question is on the list, then it shouldn't show some other related questions.

For example, "have you been in the military?". If you haven't , then you wouldn't be asked all the military related questions.

So- I'm saying:
select case when question_id = 488 then don't return question_id 220, 962, 963

I'm trying something like this:

select q.client_id,
case when q.question_id = 488 then end q.question_id = 220 else q.question_id = 220 end q.question_id
from questions_yes_no q

How would I say 'dont show' question 220? End is not the way to go, obviously.

If you can see what I'm trying to do, can you point me to an article or bol search?

Thank you for any help.

View 11 Replies


ADVERTISEMENT

How To Write Select Statement Inside CASE Statement ?

Jul 4, 2006

Hello friends,
I want to use select statement in a CASE inside procedure.
can I do it? of yes then how can i do it ?

following part of the procedure clears my requirement.

SELECT E.EmployeeID,
CASE E.EmployeeType
WHEN 1 THEN
select * from Tbl1
WHEN 2 THEN
select * from Tbl2
WHEN 3 THEN
select * from Tbl3
END
FROM EMPLOYEE E

can any one help me in this?
please give me a sample query.

Thanks and Regards,
Kiran Suthar

View 7 Replies View Related

Transact SQL :: Update Statement In Select Case Statement

May 5, 2015

I am attempting to run update statements within a SELECT CASE statement.

Select case x.field
WHEN 'XXX' THEN
  UPDATE TABLE1
   SET TABLE1.FIELD2 = 1
  ELSE
   UPDATE TABLE2
   SET TABLE2.FIELD1 = 2
END
FROM OuterTable x

I get incorrect syntax near the keyword 'update'.

View 7 Replies View Related

CASE In Select Statement

Jan 17, 2008

Hi, i've got this stored procedure:
 @LidFederatieNummer varchar(20),
@ClubID int,
@LidClubNummer varchar(50),
@PersoonNaam varchar(100),
@ClubStamnummer varchar(10),
@ClubNaam varchar(50),
@SeizoenID int,
@ShowAllJN bit,
@LidFederatieJN int,
@CategorieID int
AS
BEGIN

IF @CategorieID IS NOT NULL BEGIN
DECLARE @LicentieVerplicht int
SET @LicentieVerplicht = (SELECT LicentieVerplicht FROM Categorie WHERE ID = @CategorieID)
END

IF (@ShowAllJN = 0)
BEGIN
SET RowCount 100
END

CASE @LicentieVerplicht
WHEN '1' THEN
BEGIN
SELECTDISTINCT
ClubStamnummer,
ClubID,
ClubNaam,
LidID,
PersoonID,
Persoon,
LidFederatieNummer,
LidClubNummer,
vwClubLidPersoonAlgemeen.LidClubID,
vwClubLidPersoonAlgemeen.LicentieJN,
UserName,
PersoonActiefJN,
LI.SeizoenID,
LI.LidFederatieJN
FROM vwClubLidPersoonAlgemeen
INNER JOIN Persoon P ON vwClubLidPersoonAlgemeen.PersoonID = P.ID
INNER JOIN LidInschrijving LI ON LI.LidClubID = vwClubLidPersoonAlgemeen.LidClubID AND LI.ID = (SELECT TOP 1 LidInschrijving.ID FROM LidInschrijving WHERE LidInschrijving.LidClubID = vwClubLidPersoonAlgemeen.LidClubID ORDER BY ID DESC)
WHERE
LidFederatieNummer LIKE '%'+@LidFederatieNummer+'%'AND
ISNULL(LidClubNummer,'') LIKE '%'+@LidClubNummer+'%'AND
Persoon LIKE '%'+@PersoonNaam+'%'AND
ClubStamnummer LIKE @ClubStamnummer AND
ClubNaam LIKE '%' + @ClubNaam + '%' AND
(@ClubID = 0 OR ClubID = @ClubID) AND
(@SeizoenID = 0 OR vwClubLidPersoonAlgemeen.SeizoenID = @SeizoenID) AND
(@LidFederatieJN = -1 OR CAST(@LidFederatieJN as bit) = LI.LidFederatieJN) AND
vwClubLidPersoonAlgemeen.LicentieJN = 1
Order By Persoon
END

WHEN '2' THEN
BEGIN
SELECTDISTINCT
ClubStamnummer,
ClubID,
ClubNaam,
LidID,
PersoonID,
Persoon,
LidFederatieNummer,
LidClubNummer,
vwClubLidPersoonAlgemeen.LidClubID,
vwClubLidPersoonAlgemeen.LicentieJN,
UserName,
PersoonActiefJN,
LI.SeizoenID,
LI.LidFederatieJN
FROM vwClubLidPersoonAlgemeen
INNER JOIN Persoon P ON vwClubLidPersoonAlgemeen.PersoonID = P.ID
INNER JOIN LidInschrijving LI ON LI.LidClubID = vwClubLidPersoonAlgemeen.LidClubID AND LI.ID = (SELECT TOP 1 LidInschrijving.ID FROM LidInschrijving WHERE LidInschrijving.LidClubID = vwClubLidPersoonAlgemeen.LidClubID ORDER BY ID DESC)
WHERE
LidFederatieNummer LIKE '%'+@LidFederatieNummer+'%'AND
ISNULL(LidClubNummer,'') LIKE '%'+@LidClubNummer+'%'AND
Persoon LIKE '%'+@PersoonNaam+'%'AND
ClubStamnummer LIKE @ClubStamnummer AND
ClubNaam LIKE '%' + @ClubNaam + '%' AND
(@ClubID = 0 OR ClubID = @ClubID) AND
(@SeizoenID = 0 OR vwClubLidPersoonAlgemeen.SeizoenID = @SeizoenID) AND
(@LidFederatieJN = -1 OR CAST(@LidFederatieJN as bit) = LI.LidFederatieJN)
ORDER BY Persoon
END

WHEN '3' THEN
BEGIN
SELECTDISTINCT
ClubStamnummer,
ClubID,
ClubNaam,
LidID,
PersoonID,
Persoon,
LidFederatieNummer,
LidClubNummer,
vwClubLidPersoonAlgemeen.LidClubID,
vwClubLidPersoonAlgemeen.LicentieJN,
UserName,
PersoonActiefJN,
LI.SeizoenID,
LI.LidFederatieJN
FROM vwClubLidPersoonAlgemeen
INNER JOIN Persoon P ON vwClubLidPersoonAlgemeen.PersoonID = P.ID
INNER JOIN LidInschrijving LI ON LI.LidClubID = vwClubLidPersoonAlgemeen.LidClubID AND LI.ID = (SELECT TOP 1 LidInschrijving.ID FROM LidInschrijving WHERE LidInschrijving.LidClubID = vwClubLidPersoonAlgemeen.LidClubID ORDER BY ID DESC)
WHERE
LidFederatieNummer LIKE '%'+@LidFederatieNummer+'%'AND
ISNULL(LidClubNummer,'') LIKE '%'+@LidClubNummer+'%'AND
Persoon LIKE '%'+@PersoonNaam+'%'AND
ClubStamnummer LIKE @ClubStamnummer AND
ClubNaam LIKE '%' + @ClubNaam + '%' AND
(@ClubID = 0 OR ClubID = @ClubID) AND
(@SeizoenID = 0 OR vwClubLidPersoonAlgemeen.SeizoenID = @SeizoenID) AND
(@LidFederatieJN = -1 OR CAST(@LidFederatieJN as bit) = LI.LidFederatieJN) AND
vwClubLidPersoonAlgemeen.LicentieJN = 0
Order By Persoon
END
 According the value of my @LicentieVerplicht variable:
DECLARE @LicentieVerplicht intSET @LicentieVerplicht = (SELECT LicentieVerplicht FROM Categorie WHERE ID = @CategorieID)
My where clausule should change... how can  i achieve this cause my case is not working because it is not inside the select statement

View 4 Replies View Related

Case When In A Select Statement

Apr 13, 2006

Hi everyone,
I have the following problem withj this query:

SELECT DocNumber,
       Title,FirstName,LastName,Paper,
       ANNO,Location,Keywords,
       URL= case WHEN URL IS NULL THEN
'|<a
href=''https://illiad.library.nova.edu/illiad/FNN/illiad.dll?ILLiadRedirect=OpenURL&genre=thesis&isbn='+CONVERT(varchar,DocNumber)+'&title='+CONVERT(varchar,Title)+'&rft.pub='+CONVERT(varchar,Program)+'&rft.edition='+
CONVERT(varchar,Paper) +'&date='+ CONVERT(varchar,ANNO)+
'&aulast=' + CONVERT(varchar,Lastname) + '&aufirst=' +
CONVERT(varchar,Firstname)+
'&url_ver=Z39.88-2004&rfr_id=info:sid/MARPS:Practicum''target=''blank'')>
Order through ILLiad</a>' ELSE URL END
FROM DocTable1 WHERE FREETEXT....

When URL is null, I don't get the string showing. It works properly only in the query analyzer.

Any ideas?

Christian

View 3 Replies View Related

Case Statement Within A Select

Sep 7, 2006

Hey guys, i'm trying to use a CASE within a select but i'm not sure how to get started.

Here is my select so far, i'm inserting into a temp table that is used within a loop to gather data from my trigger:


Code:


insert into @temp_par
select CONVERT(varchar(20),d.PAT_ID),
ep.EXT_PAT_ID,
d.DRUG_DESC_ID,
d.ALLERGY_CD,
CONVERT(varchar(20),d.PAR_DT,120),
ISNULL(d.PAR_TXT, 'NULL'),
ISNULL(REPLACE(m.DRUG_NM,'"','^"'),'NULL'),
ISNULL(m.DOSAGE_FORM_CD,'NULL'),
ISNULL(m.STRGTH,'NULL'),
ISNULL(m.STRGTH_UM,'NULL')
from deleted d --PATIENT_PRIOR_ADVERSE_REACTIONS
join EXTERNAL_PATIENT ep on ep.PAT_ID = d.PAT_ID
join MEDNAME m on m.DRUG_DESC_ID = d.DRUG_DESC_ID



I would like to use a CASE for the d.ALLERGY_CD column. The data in this column is usually a 1,2,3,4,5 but i'd like to convert those to their real data, for example:


Code:

1 = A
2 = B
3 = C
4 = D
5 = E



Any help?

View 3 Replies View Related

Select Within Case Statement?

Jan 20, 2005

Limitations: Needs to be single sql statement for exec, no udf/stored proc
Objective: select aggregate count from tblPerson grouped by s_fk, division,Desc, areaDesc with rollup for totals
if mail_goes_to=1, get the s_fk value via tblPerson/tblAffiliation/tblOrg/tblCity/tblCounty
if mail_goes_to=2, get the s_fk value via tblPerson/tblCity/tblCounty, skipping tblAffiliation/tblOrg

What's the best method? A case statement? Would a cross-join work? Thanks so much for any and all advice!

tblPerson: person_pk, affiliation_fk; home_city_fk, mail_goes_to
tblAffiliation: affiliation_pk, organization_fk
tblOrg: organization_pk, city_fk
tblCity: city_pk, county_fk
tblCounty: county_pk, s_fk

For resulting display only:
tblPersonArea: personArea_pk, area_fk, person_fk
tblArea: area_pk, areaDesc, division_fk
tblDivision: division_pk, divisionDesc

View 1 Replies View Related

Select Case Statement

Apr 30, 2008

INSERT INTO #rpt(Hic, DtImported, Source, PlanID, LastName, FirstName, MemID, CaseStatus)
SELECT
s.Hic,
s.DtImported,
s.Source,
dbo.LastErolledPlan_C_D(s.Hic,s.IsPart_C) as PlanID,
m.LastName,
m.FirstName,
dbo.GetMemID_PartC_D(s.Hic,s.IsPart_C) as MemID,
s.CaseStatus = CASE WHEN CaseStatus ='1' or CaseStatus='0' THEN 'New'
CASE WHEN CaseStatus <>'1' or <> CaseStatus <>'0' Old

ElSE 'No Valid'
End


from tbEsccSuspects s inner join tbPDMMembers m
on s.Hic = m.HicNumber
Where s.EUFStatus = 1 -- AND DtEUFSent is NULL


what I am doing wrong in the case statment that I am getting an error. ?????

View 8 Replies View Related

SQL Select Statement With Case SENSITIVE

Feb 8, 2007

Hi,I am wondering how do I write a query that will take case sensitive into consideration. For example, I have "ABCD", "abcD", ABcd", "AbCd" in a table. I want to retrieve "AbCd"  only from the table. This is the sql statement that I have:sqlSelect = "SELECT * FROM [al_table] WHERE [alphabet]= @alpha"Dim selectCmd As New SqlCommand(sqlSelect, myConnection)       selectCmd.Parameters.AddWithValue("@alpha", "AbCd") From what I have it will return all those value. But that is not what I want. Thanks 

View 4 Replies View Related

Can Anyone Tell Me How To Use 'Case' Statement In Select Query In SQL ?

Mar 14, 2008

I need to pull one field from one table and one field from  another table that is i need to pull 'eGroupName' field from 'Exception' Table and 'eGroup Description' field from 'eGroup' Table  but there is no connection between these two tables means there is no forign key relationship between these two tables but i need to pull both fields . If i use INNER JOIN i need to mention relationship between both tables right? so how to write query for this , and one more thing is i need to add an extra column as "Location"which is not there in either of tables for that i need to use CASE Statement as if DataSource = 1 then "ABC" else "BCD" . pls help me out in writing SQL Statement???
is this correct ?? its showing me errors
Select Exception.eGroupName, eGroup.eGroupDescription from Exception Inner Join eGroup ON ???
(case when 'DataSource =1' then 'ABC' then 'BCD' endcase)
Where .....
 Pls correct me
Thanks

View 8 Replies View Related

Using Case In A Select Statement,urgent!

Feb 15, 2002

Hi All,

I need a hand in this script.
SELECT a.id ,value = CASE
when (x1-x0) = 0 then
((Y2-Y0)-(Y1-Y0))/(0.000000001*(X2-X0))
ELSE
((-111.48277-Y0)-(Y1-Y0))/((X1-X0)*(32.72383-X0))
END
,value2 = CASE
when (x1-x0) = 0 then
((Y2-Y0)-(Y1-Y0))/(0.000000001*(X2-X0))
ELSE
((-111.48277-Y0)-(Y1-Y0))/((X1-X0)*(32.72383-X0))
END
FROM table_name a
where value > 0
ORDER BY VALUE

The problem I'm having is in the where clause. Because the value is not a column name sql server is giving me an error. I need to evaluate the value returned. How can I get around this problem? Any sort of advise will help!
Thank you in advance!

View 1 Replies View Related

Using A CASE Statement Within A Select Query

Jul 25, 2006

Hi folks,

Hope you are all well.

I am using a CASE statement within a SELECT query to sum up values for different customers.

SELECT CR_CUST.Customer_Code,
'General_01' = CASE WHEN CR_PROD.Part_Class_Code = '01' THEN SUM(CR_INVOICE.Line_Value) ELSE 0 END,
'General_07' = CASE WHEN CR_PROD.Part_Class_Code = '07' THEN SUM(CR_INVOICE.Line_Value) ELSE 0 END,
'General_08' = CASE WHEN CR_PROD.Part_Class_Code = '08' THEN SUM(CR_INVOICE.Line_Value) ELSE 0 END
FROM CR_CUST
INNER JOIN CR_INVOICE ON CR_CUST.Customer_Code = CR_INVOICE.Customer_Code
INNER JOIN CR_PROD ON CR_INVOICE.Product_Code = CR_PROD.Product_Code
WHERE (CR_PROD.Part_Class_Code = 1 OR
CR_PROD.Part_Class_Code = 7 OR
CR_PROD.Part_Class_Code = 8)
GROUP BY CR_CUST.Customer_Code,
CR_PROD.Part_Class_Code

The above query produces the following results...

Customer_Code General_01 General_07 General_08
------------- ---------------- ---------------- ----------------
02210 10074.30 .00 .00
02347 7606.49 .00 .00
02210 .00 12618.42 .00
02347 .00 13131.63 .00
02210 .00 .00 4505.44
02347 .00 .00 5018.03


My question is this - is it possible to expand my SQL Query into a Sub Query so that each customers data appears on the same line of the results?, like so...


Customer_Code General_01 General_07 General_08
------------- ---------------- ---------------- ----------------
02210 10074.30 12618.42 4505.44
02347 7606.49 13131.63 5018.03


I can achieve this by writing my results into a temporary table and extracting the data with the following SQL Query, but I just thought it would be really cool if I could do it in one SQL Statement without using a temporary table.

SELECT Customer_Code,
SUM(General_01),
SUM(General_07),
SUM(General_08)
FROM #MyTempTable
GROUP BY Customer_Code


Thanks in advance,
Kev

View 4 Replies View Related

Update Set Select Case When Statement

Nov 15, 2013

Update ed_abcdeeh set category = case when name_of_school = '' then category = 'No Facility' else '' end,status = case when name_of_school = '' then status = 'Non-Compliant' else 'Compliant' end.

How to make this query right.. when name of school is blank i want to update my category to No facility, but if the name of school has data it will just make it blank. same to the status..

VFP9.0 via MySQL 5.0

View 5 Replies View Related

T-SQL CASE Statement.. NOT In A SELECT Query - ??

Feb 4, 2008

How come SQL Server doesn't like the following?

CREATE PROCEDURE sp_myproc
(@myvar int)
AS
CASE @myvar
WHEN 1
EXEC sp1
WHEN 2
EXEC sp2
WHEN 3
EXEC sp3
DEFAULT
EXEC sp3
END


How can I code something like this legally in T-SQL?

Thanks
Jason

View 5 Replies View Related

Case Does Not Work In My Select Statement

Dec 13, 2007

Hello everybody
I have problem with CASE statement. Here is select it



Code Block
select
mev.Id
,mev.MetaElementId
,mev.ElementValue
,mev.DocumentId
,me.ElementTypeId
,castedValue =
case
when me.ElementTypeId =3 then cast(mev.ElementValue as integer)
when me.ElementTypeId =4 then cast(mev.ElementValue as datetime)
end
from dbo.tbMetaElementValue mev
inner join dbo.tbMetaElement me
on mev.MetaElementId = me.Id
where mev.MetaElementId =7


it returns











Id
MetaElementId
ElementValue
DocumentId
ElementTypeId
castedValue

49
7
2006
28
3
6/30/1905 0:00

53
7
2004
30
3
6/28/1905 0:00

61
7
2006
36
3
6/30/1905 0:00

67
7
2005
38
3
6/29/1905 0:00

70
7
2004
39
3
6/28/1905 0:00

105
7
2003
63
3
6/27/1905 0:00

166
7
2006
109
3
6/30/1905 0:00

195
7
2005
129
3
6/29/1905 0:00

220
7
2005
150
3
6/29/1905 0:00

223
7
2006
151
3
6/30/1905 0:00

As you can see it should return castedValue as integer but it cast to datetime which is wrong. If I commented line



Code Block
when me.ElementTypeId =4 then cast(mev.ElementValue as datetime)

it casts everything normal, but as soon as it has more than one condition in CASE it will choose anything but not right casting

Looks like I am missing something really fundamental. Any help is apreciated !

Thanks

View 8 Replies View Related

First Time SELECT CASE Statement User

Aug 31, 2006

Hi, I have created a login page (webform1) that enables me to enter my user number and password and if correct it re-directs to webform 2 where all data related to the usernumber that was entered in the login page, appears.  Now I want to be able to set different re-direct pages dependant upon different users as some may require more privileges then others. As for my query I have 2 types of users: staff and managers. I want to set the login page so that if staff logins in it goes webform 3 and if manager logins in it goes webform 4. My table in the Sql database is called Users & the fields are: unumber(pk), pwd, userRole, forename, surname.   I have been advised to use CASE statements, yet I do not know how to use them. Below  have left my code of a simple login without the userRole validation. Please help! Sub cmdLogin_ServerClick          If ValidateUser(txtUserNumber.Value, txtUserPass.Value) Then            Dim tkt As FormsAuthenticationTicket            Dim cookiestr As String            Dim ck As HttpCookie             tkt = New FormsAuthenticationTicket(1, txtUserNumber.Value, DateTime.Now(), _      DateTime.Now.AddMinutes(30), chkPersistCookie.Checked, "your custom data")            cookiestr = FormsAuthentication.Encrypt(tkt)            ck = New HttpCookie(FormsAuthentication.FormsCookieName(), cookiestr)            If (chkPersistCookie.Checked) Then ck.Expires = tkt.Expiration            ck.Path = FormsAuthentication.FormsCookiePath()            Response.Cookies.Add(ck)             Dim strRedirect As String            strRedirect = Request("ReturnURL")            If strRedirect <> "" Then                Response.Redirect(strRedirect, True)            Else                strRedirect = "webform1.aspx"                Response.Redirect(strRedirect, True)            End If        Else            Response.Redirect("webform3.aspx", True)        End If     End Sub 

View 1 Replies View Related

Case Sensitive Search In Sql Select Statement?

Feb 28, 2008

Hi ALL,
    How could you make the SQL Select statement query case sensitive, what i mean is i have this select statement below ...
Select * From Staff WHERE Staff.Staff_ID = 'KabirJ' AND Staff.Password = 'KaBir1!'  
and a data row in the staff table that is the following information
Staff_ID      Password
Kabirj          kabir1!
Since the cases in database is different then in the string provided, i want sql to return me nothing, How do i go about and achieve that???????????
Thanks
Kabir

View 2 Replies View Related

Need Help Converting A Select Query Into A Case Statement

Nov 24, 2004

I have the following query:

(SELECT MIN(CFGDates.AccountPdEnd)
FROM CFGDates LEFT JOIN
AR ON AR.Period = CFGDates.Period
WHERE AR.Period = '200408')


I need to convert this into a case statement.
I tried various ways but did not get the result that I was after

Thanks,
Laura

View 6 Replies View Related

T-SQL (SS2K8) :: How To Execute SP In Select Case Statement

Mar 20, 2014

I am a junior dba not a developer. So I'm just trying to get use to write code in T-SQL.

Anyways, I have a table which is dba.dbhakyedek.

Columns are

dbname, username, class_desc, object_name, permission_name, state_desc

I have statement

select case
when class_desc='OBJECT_OR_COLUMN' then 'GRANT '+permission_name+' ON '+'['+left(object_name,3)+'].'+'['+substring(object_name,5,len(object_name))+ '] TO '+username
WHEN class_desc='DATABASE_ROLE' THEN EXEC sp_addrolemember N'object_name', N'MC'
end
from dba.dbhakyedek
where username='MC'

This statement was running successfully until exec sp_addrolemember thing. I just learned that i can't call a sp in select case but i couldnt figure out how to do it.

View 6 Replies View Related

Transact SQL :: How To Use Case Statement In Select Condition

Nov 6, 2015

below is my original query

select Value = count(*) from dbo.test 

I have 20 rows in dbo.test so i will get 20 as my output, now i need to write a case statement here such that when count(*) = 0 then it should display text filed 'NO Data' else it should display the count.

View 5 Replies View Related

Transact SQL :: Nested Select Case Statement

May 18, 2015

I need to perform an update where there are multiple scenarios which determine the value that is entered. Below is a sort've psuedo code of how it needs to be.

Update MyTable SET MyColumn = CASE WHEN MyCol1 = 'Value1' Then NewValue Else
WHEN MyCol1 <> 'Value1' And MyCol2 = 'Active' Then 'Value1'

In the scenario where MyCol1 <> Value1 and MyCol2 <> 'Active' then no update would occur and the original value would remain intact.

View 2 Replies View Related

SQL 2012 :: Using Count Function And Case In One Select Statement

Jul 9, 2014

I am selecting the count of the students in a class by suing select COUNT(studentid) as StCount FROM dbo.student But I need to use a case statement on this like if count is less than 10 I need to return 'Small class' if the count is between 10 to 50 then I need to return 'Medium class' and if the count is more than 50 then 'Big class'.

Right now I am achieving this by the following case statement

SELECT 'ClassSize' = CASE WHEN Stcount<10 THEN 'Small Class'
WHEN Stcount>=10 and StCount<=50THEN 'Medium Class'
WHEN Stcount>50 THEN 'Big Class'
END
FROM(
select COUNT(studentid) as Stcount FROM dbo.student) Stdtbl

But can I do this with just one select statement?

View 2 Replies View Related

Case Statement Within A Select Where 2 Or More Instances Of The Record Exist.

Jul 23, 2005

Ok,I have a data warehouse that I am pulling records from using OracleSQL. I have a select statement that looks like the one below. Now whatI need to do is where the astrics are **** create a case statement orwhatever it is in Oracle to say that for this record if a 1/19/2005record exists then End_Date needs to be=1/19/2005 else getEnd_Date=12/31/9999. Keep in mind that a record could have both a1/19/2005 and 12/31/9999 instance of that account record. If 1/19exists that takes presedent if it doesnt then 12/31/9999. The problemis that the fields I pull from the table where the end_date is inquestion change based on which date I pull(12/31/9999 being the mostrecient which in some cases as you see I dont want.) so they are notidentical. This is tricky.Please let me know if you can help.SELECTCOLLECTOR_RESULTS.USER_ID,COLLECTOR_RESULTS.LETTER_CODE,COLLECTOR_RESULTS.ACCT_NUM AS ACCT_NUM,COLLECTOR_RESULTS.ACTIVITY_DATE,COLLECTOR_RESULTS.BEGIN_DATE,COLLECTOR_RESULTS.COLLECTION_ACTIVITY_CODE,COLLECTOR_RESULTS.PLACE_CALLED,COLLECTOR_RESULTS.PARTY_CONTACTED_CODE,COLLECTOR_RESULTS.ORIG_FUNC_AREA,COLLECTOR_RESULTS.ORIG_STATE_NUMBER,COLLECTOR_RESULTS.CACS_FUNCTION_CODE,COLLECTOR_RESULTS.CACS_STATE_NUMBER,COLLECTOR_RESULTS.STATE_POSITION,COLLECTOR_RESULTS.TIME_OBTAINED,COLLECTOR_RESULTS.TIME_RELEASED,COLLECT_ACCT_SYS_DATA.DAYS_DELINQUENT_NUM,sum(WMB.COLLECT_ACCT_SYS_DATA.PRINCIPAL_AMT)As PBal,FROMCOLLECTOR_RESULTS,COLLECT_ACCT_SYS_DATA,COLLECT_ACCOUNTWHERECOLLECT_ACCOUNT.ACCT_NUM=COLLECT_ACCT_SYS_DATA.ACC T_NUM(+)ANDCOLLECT_ACCOUNT.LOCATION_CODE=COLLECT_ACCT_SYS_DAT A.LOCATION_CODE(+)AND COLLECT_ACCOUNT.ACCT_NUM=COLLECTOR_RESULTS.ACCT_NU M(+)AND COLLECT_ACCOUNT.LOCATION_CODE=COLLECTOR_RESULTS.LO CATION_CODE(+)AND COLLECTOR_RESULTS.ACTIVITY_DATE =to_date(''01/19/2005'',''mm/dd/yyyy'')AND COLLECT_ACCOUNT.END_DATE = to_date(''12/31/9999'',''mm/dd/yyyy'')AND COLLECT_ACCT_SYS_DATA.END_DATE = *****************

View 1 Replies View Related

Trying To Use The Results Of A Case Statement In My Select List In My WHERE Clause?

Aug 10, 2006

I am fairly new with SQL and still learning. I have used a case statemtent for a column in my select list and want to use the results of that statement's field in my WHERE clause but it is not working for me. Here is the code I have so far:

SELECT
l.loanid,
p.investorid,
l.duedate,
case when pc.duedate >= l.duedate then pc.duedate end as RateDueDate,
pc.interestrate
FROM loan l
inner join participation p on p.loanid = l.loanid
inner join paymentchange pc on pc.loanid = l.loanid
where p.investorid = '12345' and RateDueDate is not null
order by l.loanid, pc.duedate

I want to put the results of this case statment in my where clause like highlighted above but it is not working because RateDueDate is not an actual column in the table. Any help would be greatly appreciated.

Thanks!

View 6 Replies View Related

Transact SQL :: Case Statement In Where Clause - Select First / Default Value If Two Different Value Exists

Nov 16, 2015

I have scenario where i have to pick one particular value from where condition. Here is the example:A store can have different types i-e A or B , A and B or either A or B.

Store     Type    Sales
11           A        1000
23       A      1980
23       B       50
5         B      560

I want to filter the store in "where clause"  where

1)- if the store has type A and  B, then assign only A
2)- if the store has  type A associated with it then assign A
3)- if the store has type B associated with it, then assign B.

Select Store, sum(sales), Type
from table1
where (TYPE]=  (case when [TYPE] in ('A','B') then 'A'
when [TYPE]='A' then 'A' else 'B'end))
GROUP BY [store], [TYPE]

The above statement is not working for when store has only Type B associated with it.

View 7 Replies View Related

SQL Server 2012 :: Select Case Statement To Remove Part Of String After One Or Two Specific Characters

Jun 3, 2015

I have an Address column that I need to Substring. I want to remove part of the string after either, or both of the following characters i.e ',' OR '*'

Example Record 1. Elland **REQUIRES BOOKING IN***
Example Record 2. Theale, Nr Reading, Berkshire
Example Record 3. Stockport

How do I achieve this in a CASE Statement?

The following two case statements return the correct results, but I some how need to combine them into a single Statement?

,LEFT(Address ,CASE WHEN CHARINDEX(',',Address) =0
THEN LEN(Address )
ELSE CHARINDEX(',' ,Address ) -1 END) AS 'Town Test'

,LEFT(Address ,CASE WHEN CHARINDEX('*',Address ) =0
THEN LEN(Address)
ELSE CHARINDEX('*' ,Address ) -1 END) AS 'Town Test2'

View 8 Replies View Related

How To Make Select Statement With &"case Sensitive&"

Apr 30, 2008

Hi,

I am using SQL Server 2005 now.

I have to queries.that are

select 8 from testdb where name = 'TONY'

select 8 from testdb where name = 'tony'

the two queies get same results now. but 'TONY' and 'tony' are different if we need 'case sensitive'.

how to make the above queries get different result

My test data like following (testdb table)

name phone
TONY 12345
tony 67890

Thanks

Mark

View 4 Replies View Related

Problem Using Result From CASE In Another CASE Statement

Nov 5, 2007

I have a view where I'm using a series of conditions within a CASE statement to determine a numeric shipment status for a given row. In addition, I need to bring back the corresponding status text for that shipment status code.

Previously, I had been duplicating the CASE logic for both columns, like so:




Code Block...beginning of SQL view...
shipment_status =
CASE
[logic for condition 1]
THEN 1
WHEN [logic for condition 2]
THEN 2
WHEN [logic for condition 3]
THEN 3
WHEN [logic for condition 4]
THEN 4
ELSE 0
END,
shipment_status_text =
CASE
[logic for condition 1]
THEN 'Condition 1 text'
WHEN [logic for condition 2]
THEN 'Condition 2 text'
WHEN [logic for condition 3]
THEN 'Condition 3 text'
WHEN [logic for condition 4]
THEN 'Condition 4 text'
ELSE 'Error'
END,
...remainder of SQL view...






This works, but the logic for each of the case conditions is rather long. I'd like to move away from this for easier code management, plus I imagine that this isn't the best performance-wise.

This is what I'd like to do:



Code Block
...beginning of SQL view...
shipment_status =
CASE
[logic for condition 1]
THEN 1
WHEN [logic for condition 2]
THEN 2
WHEN [logic for condition 3]
THEN 3
WHEN [logic for condition 4]
THEN 4
ELSE 0
END,


shipment_status_text =

CASE shipment_status

WHEN 1 THEN 'Condition 1 text'

WHEN 2 THEN 'Condition 2 text'

WHEN 3 THEN 'Condition 3 text'

WHEN 4 THEN 'Condition 4 text'

ELSE 'Error'

END,
...remainder of SQL view...


This runs as a query, however all of the rows now should "Error" as the value for shipment_status_text.

Is what I'm trying to do even currently possible in T-SQL? If not, do you have any other suggestions for how I can accomplish the same result?

Thanks,

Jason

View 1 Replies View Related

SQL Server 2012 :: Update Statement With CASE Statement?

Aug 13, 2014

i was tasked to created an UPDATE statement for 6 tables , i would like to update 4 columns within the 6 tables , they all contains the same column names. the table gets its information from the source table, however the data that is transferd to the 6 tables are sometimes incorrect , i need to write a UPDATE statement that will automatically correct the data. the Update statement should also contact a where clause

the columns are [No] , [Salesperson Code], [Country Code] and [Country Name]

i was thinking of doing

Update [tablename]
SET [No] =
CASE
WHEN [No] ='AF01' THEN 'Country Code' = 'ZA7' AND 'Country Name' = 'South Africa'
ELSE 'Null'
END

What is the best way to script this

View 1 Replies View Related

Case Statement Error In An Insert Statement

May 26, 2006

Hi All,
I've looked through the forum hoping I'm not the only one with this issue but alas, I have found nothing so I'm hoping someone out there will give me some assistance.
My problem is the case statement in my Insert Statement. My overall goal is to insert records from one table to another. But I need to be able to assign a specific value to the incoming data and thought the case statement would be the best way of doing it. I must be doing something wrong but I can't seem to see it.

Here is my code:
Insert into myTblA
(TblA_ID,
mycasefield =
case
when mycasefield = 1 then 99861
when mycasefield = 2 then 99862
when mycasefield = 3 then 99863
when mycasefield = 4 then 99864
when mycasefield = 5 then 99865
when mycasefield = 6 then 99866
when mycasefield = 7 then 99867
when mycasefield = 8 then 99868
when mycasefield = 9 then 99855
when mycasefield = 10 then 99839
end,
alt_min,
alt_max,
longitude,
latitude
(
Select MTB.LocationID
MTB.model_ID
MTB.elevation, --alt min
null, --alt max
MTB.longitude, --longitude
MTB.latitude --latitude
from MyTblB MTB
);

The error I'm getting is:
Incorrect syntax near '='.

I have tried various versions of the case statement based on examples I have found but nothing works.
I would greatly appreciate any assistance with this one. I've been smacking my head against the wall for awhile trying to find a solution.

View 10 Replies View Related

How To Show Records Using Sql Case Statement Or If Else Statement

Feb 20, 2008

i want to display records as per if else condition in ms sql query,for this i have used tables ,queries as follows


as per data in MS Sql

my tables are as follows
1)material
fields are -- material_id,project_type,project_id,qty, --

2)AB_Corporate_project
fields are-- ab_crp_id,custname,contract_no,field_no

3)Other_project
fields are -- other_proj_id,other_custname,po

for ex :
vales in table's are
AB_Corporate_project
=====================
ab_crp_id custname contract_no field_no
1 abc 234 66
2 xyz 33 20

Other_project
============
other_proj_id other_custname po
1 xxcx 111
2 dsd 222

material
=========
material_id project_type project_id qty
1 AB Corporate 1 3
2 Other Project 2 7

i have taken AB Corporate for AB_Corporate_project ,Other Project for Other_project


sample query i write :--

select m.material_id ,m.project_type,m.project_id,m.qty,ab.ab_crp_id,
ab.custname ,op.other_proj_id,op.other_custname,op. po
case if m.project_type = 'AB Corporate' then
select * from AB_Corporate_project where ab.ab_crp_id = m.project_id
else if m.project_type = 'Other Project' then
select * from Other_project where op.other_proj_id=m.project_id
end
from material m,AB_Corporate_project ab,Other_project op


but this query not work,also it gives errors

i want sql query to show data as follows


material_id project_type project_id custname other_custname qty
1 AB Corporate 1 abc -- 3
2 Other Project 2 -- dsd 7

so plz help me how can i write sql query for to show the output
plz send a sql query

View 8 Replies View Related

Select Statement Within Select Statement Makes My Query Slow....

Sep 3, 2007

Hello... im having a problem with my query optimization....

I have a query that looks like this:


SELECT * FROM table1
WHERE location_id IN (SELECT location_id from location_table WHERE account_id = 998)


it produces my desired data but it takes 3 minutes to run the query... is there any way to make this faster?... thank you so much...

View 3 Replies View Related

Case Statement In Sql Help

Jan 18, 2008

I am trying to use a case statement in one of my stored proc but I am stuck a little bit.Here is a example, something like:declare @id int   set @id =1case @id         When 1 then select  *  from contactsend case but this keeps on giving me error: Incorrect syntax near the keyword 'case'. Any help is appreciated! 

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved