I have a table that contains the following records:
ptrecidpaidbyamtchequenoname
4791A X A1200097760LOWE, Bernard
4791A X A4380097760LOWE, Bernard
4791A X A620106406LOWE, Bernard
I need to create a view that returns only the FIRST occurance of each distinct ptrecid. I do NOT want to sum amt/chequeno, but rather return only the values in the first record. Using a group by gets me close, but since the amt and chequeno are not unique, they do not group. Min also does not work, as 620 is returned for amt, and 097760 is returned for chequeno.
The desired result from this query would return:
4791A X A1200097760LOWE, Bernard
I am trying to create a view that shows the first occurance of a particular value in a column.
For example, I have a table that contains multiple part numbers that can be associated with mulitple customers. The first occurance of the part number in the table is associated with the main customer for that part number. I want this view to only show the main customer for each part number.
I am able to do this in Access using the following SQL statement: SELECT dbo_CustPattMast.PATTERN_NUM, First (dbo_CustPattMast.CUST_NUM) FROM dbo_CustPattMast GROUP BY dbo_CustPattMast.PATTERN_NUM
When trying to create the view in the SQL Manager, it will not allow me to use the First statement.
I am making a sql query and its bring back hundreds of results but I only need the first one. I am aware that getting the first one will be faster as well. Is there an efficient way to do this?
select top 1 MWh from ( select Top 2 Mwh, tDeklarationElleverantorID from tDeklarationElleverantor where tDeklarationElleverantor.DeklarationID = tDeklaration.DeklarationID and tDeklarationElleverantor.Borttagen IS NULL order by DeklarationElleverantorID ) as [Elleverantor 2 MWh]
But when I put in my long select it doesnt work. Also the long script works fine without these rows inserted. I hope someone can tell me why. //Tommy
I post the entire script and the error message can be found below.
Msg 156, Level 15, State 1, Line 59 Incorrect syntax near the keyword 'select'. Msg 170, Level 15, State 1, Line 114 Line 114: Incorrect syntax near '-'.
SELECT tDeklaration.Diarienummer, IO.OrgNr, IO.OrgNamn, tDeklaration.KontaktpersonNamn, tDeklaration.KontaktpersonEpost, tDeklaration.KontaktpersonTele, (select sum(tForbrukadEgen.EgenProduceradEl) from tForbrukadEgen where tForbrukadEgen.DeklarationID = tDeklaration.DeklarationID) as [Egen producerad], -- Hämta ut Orgnamnet för en Elleverantör. Finns det inte i Tabellen ta intressentID:t och hoppa iväg till IREG. (select Case When (Select OrgNamn from tDeklarationElleverantor Where DeklarationElleverantorID = (SELECT top 1 DeklarationElleverantorID FROM tDeklarationElleverantor WHERE tDeklaration.DeklarationID = tDeklarationElleverantor.DeklarationID and tDeklarationElleverantor.Borttagen IS NULL )) IS NULL then (Select intressentregister_skarp.dbo.tIntressentOrganisation.OrgNamn from intressentregister_skarp.dbo.tIntressentOrganisation Where intressentregister_skarp.dbo.tIntressentOrganisation.IntressentID = (SELECT top 1 IntressentID FROM tDeklarationElleverantor WHERE tDeklaration.DeklarationID = tDeklarationElleverantor.DeklarationID and tDeklarationElleverantor.Borttagen IS NULL )) ELse (Select OrgNamn from tDeklarationElleverantor Where DeklarationElleverantorID = (SELECT top 1 DeklarationElleverantorID FROM tDeklarationElleverantor WHERE tDeklaration.DeklarationID = tDeklarationElleverantor.DeklarationID and tDeklarationElleverantor.Borttagen IS NULL )) End) [Elleverantor 1 Namn], (select Case When (Select OrgNr from tDeklarationElleverantor Where DeklarationElleverantorID = (SELECT top 1 DeklarationElleverantorID FROM tDeklarationElleverantor WHERE tDeklaration.DeklarationID = tDeklarationElleverantor.DeklarationID and tDeklarationElleverantor.Borttagen IS NULL )) IS NULL then (Select intressentregister_skarp.dbo.tIntressentOrganisation.OrgNr from intressentregister_skarp.dbo.tIntressentOrganisation Where intressentregister_skarp.dbo.tIntressentOrganisation.IntressentID = (SELECT top 1 IntressentID FROM tDeklarationElleverantor WHERE tDeklaration.DeklarationID = tDeklarationElleverantor.DeklarationID and tDeklarationElleverantor.Borttagen IS NULL )) ELse (Select OrgNr from tDeklarationElleverantor Where DeklarationElleverantorID = (SELECT top 1 DeklarationElleverantorID FROM tDeklarationElleverantor WHERE tDeklaration.DeklarationID = tDeklarationElleverantor.DeklarationID and tDeklarationElleverantor.Borttagen IS NULL )) End) [Elleverantor 1 OrgNr], (Select MWh from tDeklarationElleverantor Where DeklarationElleverantorID = (SELECT top 1 DeklarationElleverantorID FROM tDeklarationElleverantor WHERE tDeklaration.DeklarationID = tDeklarationElleverantor.DeklarationID and tDeklarationElleverantor.Borttagen IS NULL )) as [Elleverantor 1 MWh],
-- Here is the problem....... select top 1 MWh from ( select Top 2 Mwh, tDeklarationElleverantorID from tDeklarationElleverantor where tDeklarationElleverantor.DeklarationID = tDeklaration.DeklarationID and tDeklarationElleverantor.Borttagen IS NULL order by DeklarationElleverantorID ) as [Elleverantor 2 MWh],
(select (select sum(tDeklarationElleverantor.MWh) from tDeklarationElleverantor where tDeklarationElleverantor.DeklarationID = tDeklaration.DeklarationID) + (select sum(tForbrukadEgen.EgenProduceradEl) from tForbrukadEgen where tForbrukadEgen.DeklarationID = tDeklaration.DeklarationID) ) as [Summa använd och vidare fakturerad], ElTillverkning AS Tillverkningsprocess, ElDel AS [Tillverkningsprocess del av år], ForsaljningsVarde AS Försäljningsvärde, (select Case When ElTillverkning > 0 or Forsaljningsvarde > 0 Then ElTillverkning/Forsaljningsvarde ELse 0 End) As Kvot, (select Case When ElTillverkning <= 0 or Forsaljningsvarde <= 0 Then 0 When ElTillverkning/Forsaljningsvarde < 40 then 0 When ElTillverkning/Forsaljningsvarde >= 40 and ElTillverkning/Forsaljningsvarde < 50 then ElTillverkning/Forsaljningsvarde * 0.5 When ElTillverkning/Forsaljningsvarde >= 50 and ElTillverkning/Forsaljningsvarde < 60 then ElTillverkning/Forsaljningsvarde * 0.75 ELse ElTillverkning/Forsaljningsvarde End) as [Undantagen elmängd],
(select (select SUM(tHjalpkraft.Bruttoproduktion * tSchablonAr.Schablon)/100 from tHjalpkraft INNER JOIN tSchablonAr ON tHjalpkraft.KraftslagID = tSchablonAr.KraftslagID where tHjalpkraft.DeklarationID = tDeklaration.DeklarationID and tSchablonAr.Ar=2007) + (select SUM( tFaktiskHjalpkraft.NettoProduktion) from tFaktiskHjalpkraft where tDeklaration.DeklarationID = tFaktiskHjalpkraft.DeklarationID)) AS [Hjälpkraft],
--Summa avdrag för vidare fakturerad el (ny kolumn, summan under rubrik 5)
(select SUM(tFornybarFrom07.Fornybar) from tFornybarFrom07 where tFornybarFrom07.DeklarationID = tDeklaration.DeklarationID) AS [Förnybar], tDeklaration.Kvotplikt, tDeklaration.BegartAnnullerat as Annullering, tDeklaration.Ovrigt as [Övriga Upplysningar], tDeklaration.Kvotplikt - tDeklaration.Annullerat AS Saknas, tDeklaration.DeklarationStatusID, tDeklarationStatus.StatusIntern FROM tDeklaration INNER JOIN tDeklarationStatus on tDeklaration.DeklarationStatusID = tDeklarationStatus.DeklarationStatusID INNER JOIN tRegistreradKvotpliktIntressent ON tDeklaration.RegistreradKvotpliktID = tRegistreradKvotpliktIntressent.RegistreradKvotpliktID INNER JOIN tIntressentforadOrg ON tIntressentforadOrg.IntressentforadOrgID = tRegistreradKvotpliktIntressent.IntressentForadOrgID LEFT OUTER JOIN intressentregister_skarp.dbo.tIntressentOrganisation IO ON IO.IntressentID = tIntressentforadOrg.ForadAgarID --left outer join tDeklarationElleverantor on tDeklarationElleverantor.DeklarationID = tDeklaration.DeklarationID WHERE (tDeklaration.AktuellIntern = 1) AND (tDeklaration.KategoriID = 3) AND (tDeklaration.DeklarationStatusID <> 1) AND (tDeklaration.DeklarationStatusID <> 3)and tdeklaration.kvotpliktar=2007 order by IO.OrgNamn
Declare @MYTable Table ( RecordID int identity, EmployeeID int, JobCode varchar(4) ) Insert into @MYTable Values(1,'123') Insert into @MYTable Values(2,'123') Insert into @MYTAble Values (1,'123') Insert into @MyTable Values (2, '123') Insert into @MyTable Values (3,'123') Insert into @MYTable Values (1,'222') Insert into @MYtable Values (3,'222') Insert into @MYTable Values (1,'222') Insert into @MyTable Values (4,'222') Insert into @MyTable Values (5,'123') Insert into @MyTable Values (6,'123') Insert into @MyTable Values (7,'457')
Select * from @Mytable
The each employee can come to this table multiple time however the job code should be different for each every single record. So If I have to check this error and see which record has been repeated with the same Employee ID and JobCode and how many times. how would i do that Thanks,
Is there a simple command to find the 18th occurance/position of ";" in a field and I need to do this in the SQL code.
I can use charindex to find the 1st position and I can write a function to keep chopping off the data at the start of the field until I get to the 18th occurance but it takes 18 lines or so of code.
Is there a simpler way of doing this?
I need to find the 18th occurance of ";" and then take the next 4 characters.
I have a windows nt server 4.0 .its having IIS4.0 as well as Ms sql server 7.0 installed. I am using ASP ( active server pages) to store the fields entered by the customers in the order processing form in my site( thats the default page--form)
this form calls the asp file and asp file successfully stores the fields in the corresponding table.Now the problem is that how can i configure my sql server in such a way that sql server can mail me( as i am the administrator) informing the new order placed by the customer.
I know sql mail , and i have already configured that also. but how can i create the trigger for the table updation?
i tried using the enterprise manager, i was using xp_sendmail. but sql says "the stored procedure can't be found"
Hello all, I have two mult-value parameters in my report. Both of them working with selecting one or more values. But, when I test using "(Select All)" values for both parameters , only one parameter works. The "available values" for these two parameters are both from the data set.
select distinct ProductType from Product order by ProductType
I am unable to the access on table even after providing the SELECT permission on table.
Used Query by me :
Here Test is schema ; Card is table ; User is Satish
To grant select on Table
GRANT SELECT ON TEST.Card TO satish Even after this it is not working, So provided select on schema also. used query : GRANT SELECT ON SCHEMA::TEST TO Satish.
Hi all, I copied and executed the following sql code in my SQL Server Management Studio Express (SSMSE): --SELECTeg8.sql from SELECT-Using correlated subqueries of MSDN2 SELECT Examples--
USE AdventureWorks ;
GO
SELECT DISTINCT Name
FROM Production.Product p
WHERE EXISTS
(SELECT *
FROM Production.ProductModel pm
WHERE p.ProductModelID = pm.ProductModelID
AND pm.Name = 'Long-sleeve logo jersey') ;
GO
-- OR
USE AdventureWorks ;
GO
SELECT DISTINCT Name
FROM Production.Product
WHERE ProductModelID IN
(SELECT ProductModelID
FROM Production.ProductModel
WHERE Name = 'Long-sleeve logo jersey') ;
GO
========================================= I got: Results Messages Name o row affected ======================================== I think I did not get a complete output from this job. Please help and advise whether I should search somewhere in the SSMSE for the complete results or I should correct some code statements in my SELECTeg8.sql for obtaining the complete results.
Dear All I need to cerate a SP that SELECTS all the records from a table WHERE the first letter of each records starts with 'A' or 'B' or 'C' and so on. The letter is passed via a parameter from a aspx web page, I was wondering that someone can help me in the what TSQL to use I am not looking for a solution just a poin in the right direction. Can you help.
I have a problem where my users complain that a select statement takes too long, at 90 seconds, to read 120 records out of a database. The select statement reads from 9 tables three of which contain 1000000 records, the others contain between 100 and 250000 records. I have checked that each column in the joins are indexed - they are (but some of them are clustered indexes, not unclustered). I have run the SQL Profiler trace from the run of the query through the "Database Engine Tuning Advisor". That just suggested two statistics items which I added (no benefit) and two indexes for tables that are not involved at all in the query (I didn't add these). I also ran the query through the Query window in SSMS with "Include Actual Execution Plan" enabled. This showed that all the execution time was being taken up by searches of the clustered indexes. I have tried running the select with just three tables involved, and it completes fast. I added a fourth and it took 7 seconds. However there was no WHERE clause for the fourth table, so I got a cartesian product which might have explained the problem. So my question is: Is it normal for such a type of read query to take 90 seconds to complete? Is there anything I could do to speed it up. Any other thoughts? Thanks
Hey guys i have a stock table and a stock type table and what i would like to do is say for every different piece of stock find out how many are available The two tables are like thisstockIDconsumableIDstockAvailableconsumableIDconsumableName So i want to,Select every consumableName in my table and then group all the stock by the consumable ID with some form of total where stockavailable = 1I should then end up with a table like thisEpson T001 - Available 6Epson T002 - Available 0Epson T003 - Available 4If anyone can help me i would be very appreciative. If you want excact table names etc then i can put that here but for now i thought i would ask how you would do it and then give it a go myself.ThanksMatt
When I run simple select against my view in Query Analyzer, I get result set in one sort order. The sort order differs, when I BCP the same view. Using third technique i.e. Select Into, I have observed the sort order is again different in the resulting table. My question is what is the difference in mechanisim of query analyzer, bcp, and select into. Thanks
Far below (in section "original 3 steps"), you see the following:1. a temp table is created2. some data is inserted into this table3. some of the inserted data is removed based on a join with the sametable that the original select was made fromIn my opinion, there is no way that the join could produce more rowsthan were originally retrieved from viewD. Hence, we could get rid ofthe DELETE step by simply changing the query to be:INSERT INTO #details ( rec_id, orig_corr, bene_corr )SELECT rec_id, 0, 0FROM viewDWHERE SOURCE_SYS NOT IN ( 'G', 'K' )AND MONTH( VALUE_DATE_A8 ) = MONTH( @date )AND YEAR( VALUE_DATE_A8 ) = YEAR( @date )AND INMESS NOT LIKE '2__' ---- the added line===== original 3 steps (mentioned above) =====CREATE TABLE #details (rec_id UNIQUEIDENTIFIER PRIMARY KEY NOT NULL,orig VARCHAR(35) NULL,bene VARCHAR(35) NULL,orig_corr TINYINT NULL,bene_corr TINYINT NULL)INSERT INTO #details ( rec_id, orig_corr, bene_corr )SELECT rec_id, 0, 0FROM viewDWHERE SOURCE_SYS NOT IN ( 'G', 'K' )AND MONTH( VALUE_DATE_A8 ) = MONTH( @date )AND YEAR( VALUE_DATE_A8 ) = YEAR( @date )DELETE dFROM #details dJOIN viewD v ON ( d.rec_id = v.rec_id )WHERE INMESS LIKE '2__'
The select command below will output one patient’s information in 1 row:
Patient id Last name First name Address 1 OP Coverage Plan 1 OP Policy # 1 OP Coverage Plan 2
[code]...
This works great if there is at least one OP coverage. There are 3 tables in which to get information which are the patient table, the coverage table, and the coverage history table. The coverage table links to the patient table via pat_id and it tells me the patient's coverage plan and in which priority to bill. The coverage history table links to the patient and coverage table via patient id and coverage plan and it gives me the effective date.
select src.pat_id, lname, fname, addr1, max(case when rn = 1 then src.coverage_plan_ end) as OP_Coverage1, max(case when rn = 1 then src.policy_id end) as OP_Policy1,
There are several parameters on a report. One of the parameter is a multi-select enabled parameter and I suppressed the value "All" showing as one of the item in the drop down list, simply by filter out the [bha].[bha].CURRENTMEMBER.LEVEL.ORDINAL to 1, as "(Select All)" is pre-assigned to the drop list when multi-select is enabled and it is confusing to show "(Select All)" and "All" in the drop list. However I have another report which is linked to this report and the value which is required to pass to this report for this parameter is "All". Can I pass the "Select All" as a parameter from the other report? If so, how? Thanks.
SELECT Top 10 Name, Contact AS DCC, DateAdded AS DateTimeFROM NameTaORDER BY DateAdded DESC I'm trying to right a sql statement for a gridview, I want to see the last ten records added to the to the database. As you know each day someone could add one or two records, how can I write it show the last 10 records entered.
I'm doing a INSERT...SELECT where I'm dependent on the records SELECT:ed to be in a certain order. This order is enforced through a clustered index on that table - I can see that they are in the proper order by doing just the SELECT part.
However, when I do the INSERT, it doesn't work (nothing is inserted) - can the order of the records from the SELECT part be changed internally on their way to the INSERT part, so to speak?
Actually - it is a view that I'm inserting into, and there's an instead-of-insert trigger on it that does the actual insertions into the base table. I've added a "PRINT" statement to the trigger code and there's just ONE record printed (there should be millions).
I have a table which is returning inconsistent results when I queryit!In query analyzer:If I do "SELECT * FROM TABLE_NAME" I get no rows returned.If I do "SELECT COL1, COL2 FROM TABLE_NAME" I get 4 rows returned.In Enterprise manager:If I do "return all rows" I get 4 rows returned, and the SQL is listedas being "SELECT * FROM dbo.TABLE_NAME".I've tried adding the "dbo." before my table name in QA, but it seemsto make no difference.I'm using SQL Server 2000, which is apparently 8.00534.Can anyone help me, or give me ideas about what to check?Thanks,Rowland.
Select COUNT(DATEDIFF(d, DateintoSD, SDCompleted) - DATEDIFF(ww, DateintoSD, SDCompleted) * 2) AS 'Total Jobs Completed' From Project WHERE (SDCompleted > @SDCompleted) AND (SDCompleted < @SDCompleted2) AND (BusinessSector = 34) AND (req_type = 'DBB request ')
have a table with students details in it, i want to select all the students who joined a class on a particular day and then i need another query to select all students who joined classes over the course of date range eg 03/12/2003 to 12/12/2003.
i have tried with the following query, i need help putting my queries together select * from tblstudents where classID='1' and studentstartdate between ('03/12/2004') and ('03/12/2004')
when i run this query i get this message
Server: Msg 242, Level 16, State 3, Line 1 The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.
the studentstartdate field is set as datetime 8 and the date looks like this in the table 03/12/2004 03:12:15
I am using RS 2000. I have a multi select parameter where I can select multiple states by separating with a comma. I am trying to figure out how to incorporate an "All" parameter.
Query:
Select [name], city, state, zipcode From Golf inner join charlist_to_table(@State,Default)f on State = f.str
Function:
CREATE FUNCTION charlist_to_table (@list ntext, @delimiter nchar(1) = N',') RETURNS @tbl Table (listpos int IDENTITY(1, 1) NOT NULL, str varchar(4000), nstr nvarchar(2000)) AS BEGIN DECLARE @pos int, @textpos int, @chunklen smallint, @tmpstr nvarchar(4000), @leftover nvarchar(4000), @tmpval nvarchar(4000) SET @textpos = 1 SET @leftover = '' WHILE @textpos <= datalength(@list) / 2 BEGIN SET @chunklen = 4000 - datalength(@leftover) / 2 SET @tmpstr = @leftover + substring(@list, @textpos, @chunklen) SET @textpos = @textpos + @chunklen SET @pos = charindex(@delimiter, @tmpstr) WHILE @pos > 0 BEGIN SET @tmpval = ltrim(rtrim(left(@tmpstr, @pos - 1))) INSERT @tbl (str, nstr) VALUES(@tmpval, @tmpval) SET @tmpstr = substring(@tmpstr, @pos + 1, len(@tmpstr)) SET @pos = charindex(@delimiter, @tmpstr) END SET @leftover = @tmpstr END INSERT @tbl(str, nstr) VALUES (ltrim(rtrim(@leftover)), ltrim(rtrim(@leftover))) RETURN END GO
select computer, count(*) as MissedCount from WInUpdates_Neededreq WHERE LoggedDate BETWEEN DATEADD (DAY, - 5, GETDATE()) AND GETDATE() and LastReportTime !< DATEADD (DAY, -5, GETDATE()) group by computer
I need to make a join onto another table but don't want to lose the coutn(*) as MissedCount.
How can I join to another table and still keep the count form the original table. I want ot join to tblogons.workstationname and return computer from the original query...
I have one query which uses a join query to gather all the projects that should show up in someone's list over a period of time (returns and id (int) and name (varchar) paired dataset). I want to do a separate query that takes that list and selects all projects (same paired set ... id and name) EXCEPT where it matches an id on a row of the given result set. The one query looks like this ..DECLARE @startDate datetimeDECLARE @endDate datetimeDECLARE @userId UNIQUEIDENTIFIERSELECT @startDate = ppStartDate FROM ppTablewhere payPeriodID = @payPeriodIDSELECT @endDate = ppEndDate FROM ppTable WHERE payPeriodID = @payPeriodIDSELECT @userId = userID FROM usersTable WHERE userName = @userNameSELECT DISTINCT p.projectID, p.projectNameFROM projectsTable pLEFT JOIN projectMemberhsip m ON m.ProjectId = p.ProjectIdLEFT JOIN timeEntryTable t ON t.ProjectID = p.ProjectIdWHERE t.TimeEntryUserId = @userID AND t.TimeEntryDate >= @startDate AND t.TimeEntryDate <= @endDateORm.UserId = @userID I want to get the same selection from projectsTable WHERE it's not anything from this result set.Haven't been able to get it by modifying the WHERE logic. Is there a way to select all WHERE id != (resultSet from this SELECT)? TIA!
Hello all I create sp --------------------code---------------------- ALTER procedure [dbo].[uspInviteGroup] --uspInviteGroup 'fdi' @strUserId nvarchar(50)=null as select GroupName as 'strGroupName',GroupFounder as 'strGroupFounder' from SITE_MemberGroupswhere GroupId= (select GroupId from SITE_GroupMember where userId=@strUserId) --------------------code---------------------- but when I tested the above sp --uspInviteGroup 'fdi'return this error ------------------error--------------------- Msg 512, Level 16, State 1, Procedure uspInviteGroup, Line 6 Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression. ------------------error---------------------
in my case the second select statment return 2 value,I need the first select statment return two row how can I do that? thank you
Here's the question: Is there any performance difference between using the actual column name and "rowguidcol"?
I would like to be able to script a trigger that uses the rowguidcol column. If I could use rowguidcol instead of the actual column name, I would not have to hard-code the column name in the trigger.
