Now I want to select the doc_area_name where the logged in username exists in the user_id of the document_area_user_access table.
So to clarify, I am looking to look through the document_area_user_access for each time the current users username exists and for each existing username the doc_area_name is displayed depending on what doc_area(s) is associated with the user_id in document_area_user_access.
Don't know if this has made any sense??
I am hoping to do all this in the aspx sqlsource if possible. As for each userarea that the user has access a link will exist.
Not sure if this is possible, but maybe. I have a table that contains a bunch of logs. I'm doing something like SELECT * FROM LOGS. The primary key in this table is LogID. I have another table that contains error messages. Each LogID could have multiple error messages associated with it. To get the error messages. When I perform my first select query listed above, I would like one of the columns to be populated with ALL the error messages for that particular LogID (SELECT * FROM ERRORS WHERE LogID = MyLogID). Any thoughts as to how I could accomplish such a daring feat?
Hi, not exactly too sure if this can be done but I have a need to run a query which will return a list of values from 1 column. Then I need to iterate this list to produce the resultset for return. This is implemented as a stored procedure
declare @OwnerIdent varchar(7) set @OwnerIdent='A12345B'
SELECT table1.val1 FROM table1 INNER JOIN table2 ON table1. Ident = table2.Ident WHERE table2.Ident = @OwnerIdent
'Now for each result of the above I need to run the below query
SELECT Clients.Name , Clients.Address1 , Clients.BPhone, Clients.email FROM Clients INNER JOIN Growers ON Clients.ClientKey = Growers.ClientKey WHERE Growers.PIN = @newpin)
When I run simple select against my view in Query Analyzer, I get result set in one sort order. The sort order differs, when I BCP the same view. Using third technique i.e. Select Into, I have observed the sort order is again different in the resulting table. My question is what is the difference in mechanisim of query analyzer, bcp, and select into. Thanks
have a table with students details in it, i want to select all the students who joined a class on a particular day and then i need another query to select all students who joined classes over the course of date range eg 03/12/2003 to 12/12/2003.
i have tried with the following query, i need help putting my queries together select * from tblstudents where classID='1' and studentstartdate between ('03/12/2004') and ('03/12/2004')
when i run this query i get this message
Server: Msg 242, Level 16, State 3, Line 1 The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.
the studentstartdate field is set as datetime 8 and the date looks like this in the table 03/12/2004 03:12:15
However, as you can see, the original select query is run twice and joined together.What I was hoping for is this to be done in the original query without the need to duplicate the original query.
how do I get the variables in the cursor, set statement, to NOT update the temp table with the value of the variable ? I want it to pull a date, not the column name stored in the variable...
create table #temptable (columname varchar(150), columnheader varchar(150), earliestdate varchar(120), mostrecentdate varchar(120)) insert into #temptable SELECT ColumnName, headername, '', '' FROM eddsdbo.[ArtifactViewField] WHERE ItemListType = 'DateTime' AND ArtifactTypeID = 10 --column name declare @cname varchar(30)
I have a query that performs a comparison between 2 different databases and returns the results of the comparison. It returns 2 columns. The 1st column is the value of the object being compared, and the 2nd column is a number representing any discrepancies.What I would like to do is use the results from this 1st query in the where clause of another separate query so that this 2nd query will only run for any primary values from the 1st query where a secondary value in the 1st query is not equal to zero.I was thinking of using an "IN" function in the 2nd query to pull data from the 1st column in the 1st query where the 2nd column in the 1st query != 0, but I'm having trouble ironing out the correct syntax, and conceptualizing this optimally.
While I would prefer to only return values from the 1st query where the comparison value != 0 in order to have a concise list to work with, I am having difficulty in that the comparison value is a mathematical calculation of 2 different tables in 2 different databases, and so far I've been forced to include it in the select criteria because the where clause does not accept it.Also, I am not a DBA by trade. I am a system administrator writing SQL code for reporting data from an application I support.
I have a column colC in a table myTable that has a value (e.g. '0X'). The position of a non-zero character in column colC refers to the ordinal position of another column in the table myTable (in the aforementioned example, colB).
To get a column name (i.e., colA or colB) from table myTable, I can join ("ON cte.pos = cn.ORDINAL_POSITION") to INFORMATION_SCHEMA.COLUMNS for that table catalog, schema and name. But I want to show the value of what is in that column (e.g., 'ABC'), not just the name. Hoping for:
COLUMN_NAME Value ----------- ----- colB 123 colA XYZ
I've tried dynamic SQL to no success, probably not executing the concept correctly...
I hope someone can answer this, I'm not even sure where to start looking for documentation on this. The SQL query I'm referencing is included at the bottom of this post.
I have a query with 3 select statements joined together like tables. It works great, except for the fact that I need to declare a variable and make it a table within two of those 3. The example is below. You'll see that I have three select statements made into tables A, B, and C, and that table A has a variable @years, which is a table.
This works when I just run table A by itself, but when I execute the entire query, I get an error about the "declare" keyword, and then some other errors near the word "as" and the ")" character. These are some of those errors that I find pretty meaningless that just mean I've really thrown something off.
So, am I not allowed to declare a variable within these SELECT tables that I'm creating and joining?
Thanks in advance, Andy
Select * from
(
declare @years table (years int);
insert into @years
select
CASE
WHEN month(getdate()) in (1) THEN year(getdate())-1
WHEN month(getdate()) in (2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12) THEN year(getdate())
END
select
u.fullname
, sum(tx.Dm_Time) LastMonthBillhours
, sum(tx.Dm_Time)/((select dm_billabledays from dm_billabledays where Dm_Month = Month(GetDate()))*8) lasmosbillingpercentage
from
Dm_TimeEntry tx
join
systemuserbase u
on
(tx.owninguser = u.systemuserid)
where
Month(tx.Dm_Date) = Month(getdate())-1
and
year(dm_date) = (select years from @years)
and tx.dm_billable = 1
group by u.fullname
) as A
left outer join
(select
u.FullName
, sum(tx.Dm_Time) Billhours
, ((sum(tx.Dm_Time))
/
((day(getdate()) * ((5.0)/(7.0))) * 8)) perc
from
Dm_TimeEntry tx
join
systemuserbase u
on
(tx.owninguser = u.systemuserid)
where
tx.Dm_Billable = '1'
and
month(tx.Dm_Date) = month(GetDate())
and
year(tx.Dm_Date) = year(GetDate())
group by u.fullname) as B
on
A.Fullname = B.Fullname
Left Outer Join
(
select
u.fullname
, sum(tx.Dm_Time) TwomosagoBillhours
, sum(tx.Dm_Time)/((select dm_billabledays from dm_billabledays where Dm_Month = Month(GetDate()))*8) twomosagobillingpercentage
hi, does it make a difference to write the following select statement in either query window or create a sp and then calling the store procedure to be executed..
select * from authors
OR
create procedure authors as
select * from authors
lets assume that we have million records in the author table. is it faster to run the query from within a store procedure or not ? thanks for your input
Hi, Please help me with an SQL Query that fetches all the records from the three tables but a unique record for each forum and topicid with the maximum lastpostdate. I have to bind the result to a GridView.Please provide separate solutions for SqlServer2000/2005. I have three tables namely – Forums,Topics and Threads in SQL Server2000 (scripts for table creation and insertion of test data given at the end). Now, I have formulated a query as below :- SELECT ALL f.forumid,t.topicid,t.name,th.author,th.lastpostdate,(select count(threadid) from threads where topicid=t.topicid) as NoOfThreads FROM Forums f FULL JOIN Topics t ON f.forumid=t.forumid FULL JOIN Threads th ON t.topicid=th.topicid GROUP BY t.topicid,f.forumid,t.name,th.author,th.lastpostdate ORDER BY t.topicid ASC,th.lastpostdate DESC Whose result set is as below:-
forumid topicid name author lastpostdate NoOfThreads
5 17 General NULL NULL 0 On modifying the query to:- SELECT ALL f.forumid,t.topicid,t.name,th.author,th.lastpostdate,(select count(threadid) from threads where topicid=t.topicid) as NoOfThreads FROM Forums f FULL JOIN Topics t ON f.forumid=t.forumid FULL JOIN Threads th ON t.topicid=th.topicid GROUP BY t.topicid,f.forumid,t.name,th.author,th.lastpostdate HAVING th.lastpostdate=(select max(lastpostdate)from threads where topicid=t.topicid) ORDER BY t.topicid ASC,th.lastpostdate DESC I get the result set as below:-
forumid topicid name author lastpostdate NoOfThreads
5 17 General NULL NULL 0 I want all the rows from the Forums,Topics and Threads table and the row with the maximum date (the last post date of the thread) as shown above. The scripts for creating the tables and inserting test data is as follows in an already created database:- if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[FK__Topics__forumid__79A81403]') and OBJECTPROPERTY(id, N'IsForeignKey') = 1) ALTER TABLE [dbo].[Topics] DROP CONSTRAINT FK__Topics__forumid__79A81403 GO if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[FK__Threads__topicid__7C8480AE]') and OBJECTPROPERTY(id, N'IsForeignKey') = 1) ALTER TABLE [dbo].[Threads] DROP CONSTRAINT FK__Threads__topicid__7C8480AE GO if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[Forums]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) drop table [dbo].[Forums] GO if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[Threads]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) drop table [dbo].[Threads] GO if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[Topics]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) drop table [dbo].[Topics] GO CREATE TABLE [dbo].[Forums] ( [forumid] [int] IDENTITY (1, 1) NOT NULL , [name] [varchar] (255) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL , [description] [varchar] (255) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL ) ON [PRIMARY] GO CREATE TABLE [dbo].[Threads] ( [threadid] [int] IDENTITY (1, 1) NOT NULL , [topicid] [int] NOT NULL , [subject] [varchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL , [replies] [int] NOT NULL , [author] [varchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL , [lastpostdate] [datetime] NULL ) ON [PRIMARY] GO CREATE TABLE [dbo].[Topics] ( [topicid] [int] IDENTITY (1, 1) NOT NULL , [forumid] [int] NULL , [name] [varchar] (255) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL , [description] [varchar] (255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ) ON [PRIMARY] GO ALTER TABLE [dbo].[Forums] ADD PRIMARY KEY CLUSTERED ( [forumid] ) ON [PRIMARY] GO ALTER TABLE [dbo].[Threads] ADD PRIMARY KEY CLUSTERED ( [threadid] ) ON [PRIMARY] GO ALTER TABLE [dbo].[Topics] ADD PRIMARY KEY CLUSTERED ( [topicid] ) ON [PRIMARY] GO ALTER TABLE [dbo].[Threads] ADD FOREIGN KEY ( [topicid] ) REFERENCES [dbo].[Topics] ( [topicid] ) GO ALTER TABLE [dbo].[Topics] ADD FOREIGN KEY ( [forumid] ) REFERENCES [dbo].[Forums] ( [forumid] ) GO ------------------------------------------------------ insert into forums(name,description) values('Developers','Developers Forum'); insert into forums(name,description) values('Database','Database Forum'); insert into forums(name,description) values('Desginers','Designers Forum'); insert into forums(name,description) values('Architects','Architects Forum'); insert into forums(name,description) values('General','General Forum'); insert into topics(forumid,name,description) values(1,'Java Overall','Topic Java Overall'); insert into topics(forumid,name,description) values(1,'JSP','Topic JSP'); insert into topics(forumid,name,description) values(1,'EJB','Topic Enterprise Java Beans'); insert into topics(forumid,name,description) values(1,'Swings','Topic Swings'); insert into topics(forumid,name,description) values(1,'AWT','Topic AWT'); insert into topics(forumid,name,description) values(1,'Web Services','Topic Web Services'); insert into topics(forumid,name,description) values(1,'JMS','Topic JMS'); insert into topics(forumid,name,description) values(1,'XML,HTML','XML/HTML'); insert into topics(forumid,name,description) values(1,'Javascript','Javascript'); insert into topics(forumid,name,description) values(2,'Oracle','Topic Oracle'); insert into topics(forumid,name,description) values(2,'Sql Server','Sql Server'); insert into topics(forumid,name,description) values(2,'MySQL','Topic MySQL'); insert into topics(forumid,name,description) values(3,'CSS','Topic CSS'); insert into topics(forumid,name,description) values(3,'FLASH/DHTLML','Topic FLASH/DHTLML'); insert into topics(forumid,name,description) values(4,'Best Practices','Best Practices'); insert into topics(forumid,name,description) values(4,'Longue','Longue'); insert into topics(forumid,name,description) values(5,'General','General Discussion'); insert into threads(topicid,subject,replies,author,lastpostdate) values (1,'About Java Tutorial',2,'a@b.com','1/27/2008 02:44:29 PM'); insert into threads(topicid,subject,replies,author,lastpostdate) values (1,'Java Basics',0,'x@y.com','1/27/2008 02:48:53 PM'); insert into threads(topicid,subject,replies,author,lastpostdate) values (4,'Swings',0,'p@q.com','1/27/2008 03:12:51 PM');
So the query only returns the one record for each age_group on each date for the top 3 dates. Does anyone have any ideas? I hope I have explained it well enough!
Hello,I have the following tables:[Blogs] > BlogId (PK), ...[Posts] > PostId (PK), BlogId (FK), Title, Content, ...[Labels] > LabelId (PK), LabelName[LabelsInPosts] > LabelId (PK), PostId(PK)I am selecting all posts from a Blog given the BlogId:SELECT * FROM dbo.Posts WHERE BlogId = @BlogIdThis will return the columns Title, Content, ... for those posts.I would like to add 2 columns, PostLabels and LabelsCount:1. PostLabels would be created by:For each post select all the labels associated with it inLabelsInPosts. Then for each label get the label name. Then createthe value of PostLabels which would be each label separated by acomma.I tried the following but this is not working. I am having problems getting the LabelId from LabelsInPosts and then getting the LabelName from Labels and use them to create the CSV string:SELECT DISTINCT l1.PostID, STUFF((SELECT DISTINCT TOP 100 PERCENT ',' + l2.LabelName FROM Labels AS l2 WHERE l2.PostID = l1.PostID ORDER BY ',' + l2.LabelName FOR XML PATH('')), 1, 1, '') AS PostLabelsFROM Labels AS l1ORDER BY l1.PostID2. LabelsCount would be the number of labels associated with each postI created a procedure which, given a PostId, returns the number oflabels associated with it.So I suppose it would be only a question of integrating a call tothis procedure with this SELECT I am trying to create.Thank You,Miguel
I need to query the DB and only see if the 1st 5 characters of a Guid match. How would i go about only calling a certain amount of characters from a Guid?
i have a table which has a colum name's Name, Album. the way data is storing is for Name Album '123' 'xyz' '4555' 'xyz' ''212' 'xyz' '33sa' 'abc' 'nyz1' 'abc' and so on. what would be the query for selecting all the Album's one row only. like when i write the query i want it to return like this. 'xyz' 'abc'
I have a table as below after executing select query select userid as userid,count as totalcount from table1 UserId totalcount 101 15 102 7 105 6 106 4 108 3 i want a extra column so that it is an autoincrement and the query result should be like UserId totalcount Sno 101 15 1 102 7 2 105 6 3 106 4 4
hi friends...... i have table t1 task startdate enddate 1 03/04/2008 10/04/2008 2 04/04/2008 10/04/20083 06/04/2008 25/04/2008 i need a query to get task id and column2column2 = if(enddate > getdate()) then 1 else 2 give me the answer without the use of cursors......answer should be in a query...thanks in advance
I am writing to learn if it is possible to obtain a value from a select query, and utilize this value in a succeeding query. Please see below for my current query. I would like to take the filenum result, and use the value in a second query. Thanks in advance! select shhd.CUST_NO, shhd.file_no as filenum from tpsdba.shipment_header SHHD WHERE SHHD.CUST_NO = '052584 ' AND (SHHD.DATE_ENTRY >= '20080401' AND SHHD.DATE_ENTRY <= '20080404')
im trying to get a page to display this query like this in a data grid SELECT TOP @rows * FROM students where student_id = @studentID Basically I want code that returns the top X number of rows, where X is a user defined variable (like in a textbox)... I've been trying to find a way to get this to work and have not and any luck... any ideas?
Hello All I havetable with 2 columns and Datas like this LRNo LRStatus L001 10 L002 10 L003 10 L001 15 L002 15 L001 20 i need a query to select the LRNo where lrstatus =10 and not equal to 15 and 20 here is my query select lrno from tbl where lrstatus in (10) and not in (15.20) but i didnt get it Please help me Thanks in Advance
I just want to concatenate two dates in Select query. For example I've 2 fields- fromdate and todate in a database table and i just want to join them by a dash.
tbl_recipes contains recipe names and is directly linked to tbl_ing, which hold all ingredients for the recipes, so for example tbl_recipes may have a recipe named "Bread" and a ing_ID of "23". In the tbl_ing table there would be (flour)(23), (water)(23), (salt)(23), (yeast)(23). Each parantheses represents a column in each row.
I have no problem to link those 2 tables together and display the results on a webpage, but I want to go a step further with my 3rd table. tbl_items contains several ingredients without any relationship to any other table. They contents of that table changes frequently. It's basically a list of available ingredients at any given moment.
I want to be able to display all the recipes I could make with the available ingredients in the tbl_items table. So, let's say I have flour, water, salt, yeast, sugar, apples in the tbl_items table. In the tbl_recipes table I have Bread, Applepie and Cherrypie. With my available ingredients I can make bread and the applepie, but not the cherrypie. Now I need to write a query that will display only those matching recipes. I'm lost on this. Can anyone please help me?
This should be simple I think but I am no expert so maybe one of you will have the kindness to help me a bit. I have two tables(System, NAIC) and both have the primary key SystemId. I need to gell all the rows from the table system and anything that correspond from the table NAIC, if no correspondant systemId the return "" or nothing in the fields of NAIC Thank you, Table: System-SystemId*-Company-Reseller-SystemType... NAIC-SystemId*-NAIC_1-NAIC_2-NAIC_3-NAIC_4
In an inventory database I have a table of Items: Item_ID, Item_Name, Current_Qtyanother table called In_Stock which records the deposits made to each item: ID, Date,Item_ID, Qtyand another called Out_Stock which records the withdraws made from each itemID, Date,Item_ID, QtyIf I want to know how many unit are there now from a specific item , I get the value of Current_Qty in the Items table.My problem is that I need to know how many units were on stock in a specific period from date1 to date2 , I failed to write a select query for the required data.Any help please?Thanks.
I've got a DataGrid that displays results depending on a selection in a dropdown list. So far, so good.But I'd also like to have an option in the dropdown list that permits to display ALL the results. The query used to fill the datagrid is the following: "SELECT * FROM [tSpecies] WHERE ([Status] = @Status)"The @Status variable refers to the selected value in the dropdown list. Which value would be needed so that this WHERE clause would display ALL the records?Thanks a lot!
i have a code L;conPubs = New SqlConnection(conStr) conPubs.Open() '**>> building select box for מצב המסלול
cmdSelect = New SqlCommand("Select * From course_type;SELECT UploadTrail_id, UploadTrail_select_types_id FROM UploadTrail_select_values WHERE (UploadTrail_id = 54) AND (UploadTrail_select_types_id = 6);", conPubs) Dim Reader As SqlDataReader Reader = cmdSelect.ExecuteReader() course_type.DataSource = Reader course_type.DataValueField = "course_id" course_type.DataTextField = "course_name" course_type.DataBind() if u look u will see 2 select's that are delimited with ; (semicolon)how can i access the second recordset after i bind the first one on the last line (i want to get values from the rows in the second "select")thnaks in advancepeleg
Let say I have a field call NAME in a table. When I do a select NAME from <table>. it shows
NAME -------------- John, Smith Jonathan, Williams How do I do a select statment to make the display look like this(without the comma, with 20 space in between, and with the last name line up)?
I have a SELECT query returning, say 200, rows. I want to grab middle 50 rows from this resultset. Is their an easy way to write my SELECT statement which would help me retrieve only these 50 rows?
