I would like to know if it is possible to do a SELECT statement where I can denormalize my table. I am not sure if it is needed to create a new table at first and insert denormalized values into the created table.
Example
Original table:
ID XXX VALUES
1 a 10
1 b 15
1 c 8
And I want to use SELECT to get this table:
ID a b c
1 10 15 8
hello group,i want to denormalize data in a temporary table for a secondbusiness-system which cant read related dataswhat i have:table Partner: (Id_Partner, NamePartner, ...)table PartnerProduct: (Id_PartnerProduct, NamePartnerProduct, ...)table Partner2PartnerProduct: (Id, Id_Partner, Id_PartnerProduct)Partner to PartnerProduct ist n:m relation (thats why i needPartner2PartnerProduct)and the temporary tableTempPartner: (Id_Partner, NamePartnerProducts)whereas NamePartnerProducts should contains a comma separated list ofthe PartnerProduct-Nameswhat i need:a trigger or combination of trigger and SP whichoperate like the following:if on Partner2PartnerProduct is a Insert or Update made, then Deletethe row in TempPartner which has the Id of the Partner, and thencreate a new row which contains all n:m joined PartnerProduct-Names init.i hope the intention and problem are clear.thanx for answers,hans
View 1 Replies View RelatedI need to write a select statement that take the upper table and select the lower table.
View 3 Replies View RelatedI have two table with some identical fields and I am trying to populate one of the tables with a row that has been selected from the other table.Is there some standard code that I can use to take the selected row and input the data into the appropriate fields in the other table?
View 3 Replies View RelatedI'm trying to get the <Title> node value returned in the select statement below, but cant quite get it to work. I have the <ID> node being returned in the statement, but not the title. Any help is apprecited.
param ids = '<Collection><Content><ID>1</ID><Title>Document 1</Title></Content>< Content><ID>2</ID><Title>Document 2</Title></Content></Collection>'
CREATE PROCEDURE [GetDownloads](@Ids xml) AS
DECLARE @ResearchDocuments TABLE (ID int)
INSERT INTO @ResearchDocuments (ID) SELECT ParamValues.ID.value('.','VARCHAR(20)')
FROM @Ids.nodes('/Collection/Content/ID') as ParamValues(ID)
SELECT * FROM research_downloads INNER JOIN @ResearchDocuments rd ON research_downloads.doc_id = rd.ID Where research_downloads.post_sf = 0
I'm trying to get the <Title> node value returned in the select statement below, but cant quite get it to work. I have the <ID> node being returned in the statement, but not the title. Any help is apprecited.
param ids = '<Collection><Content><ID>1</ID><Title>Document 1</Title></Content>< Content><ID>2</ID><Title>Document 2</Title></Content></Collection>'
CREATE PROCEDURE [GetDownloads](@Ids xml) AS
DECLARE @ResearchDocuments TABLE (ID int)
INSERT INTO @ResearchDocuments (ID) SELECT ParamValues.ID.value('.','VARCHAR(20)')
FROM @Ids.nodes('/Collection/Content/ID') as ParamValues(ID)
SELECT * FROM research_downloads INNER JOIN @ResearchDocuments rd ON research_downloads.doc_id = rd.ID Where research_downloads.post_sf = 0
Hi,I'm trying to dynamically assign the table name for a SELECT statement but can't get it to work. Given below is my code: SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE PROCEDURE GetLastProjectNumber (@DeptCode varchar(20))
AS
BEGIN TRANSACTION
SET NOCOUNT ON
DECLARE @ProjectNumber int
SET @ProjectNumber = 'ProjectNumber' + REPLACE(CONVERT(char,@DeptCode),'.','')
SELECT MAX(@ProjectNumber)
FROM 'tbl_ProjectNumber' + REPLACE(CONVERT(char,@DeptCode),'.','');
END TRANSACTION Basically, I have a bunch of tables which were created dynamically using the code from this post and now I need to access the last row in a table that matches the supplied DeptCode. This is the error I get:Msg 102, Level 15, State 1, Procedure GetLastProjectNumber, Line 29Incorrect syntax near 'tbl_ProjectNumber'. Any help would be appreciated.Thanks.
I have a table that contains the following structure and information:
Code:
UID Member_Number Time_Stamp Status Reason Event Reg F_Name L_Name
18772054062/3/2005 11:48:27 AMInNonenoneNoneWendyBoud
86930082522/3/2005 12:39:35 PMInNonenoneNoneJeremyAhlman
98772054062/3/2005 12:40:20 PMOutNonenoneNoneWendyBoud
106930082522/3/2005 12:40:45 PMOutNonenoneNoneJeremyAhlman
118772054062/3/2005 12:40:50 PMInNonenoneNoneWendyBoud
128772054062/3/2005 12:46:25 PMOutNonenoneNoneWendyBoud
I need to be able to take this information and display it in a data grid so that on each row I see the Member Number, First and Last Name and the In and Out Time.
I am not sure how to group the In and Out times together so that the query knows which time out corresponds to which time time for the member?
Any help is greatly appreciated!
Dear folks,
create table temptable(eno, ename) as select eno, ename from emp.
here the problem is it is asking for the datatype for the temporary table.
is it not possible to create the temp table without providing the datatypes?
thank you very much.
Vinod
I'm wondering if there is a single statement I can write to pull my data. Let's say my Order table has one field for userId and one field for supervisorId (among other fields) both of which are foreign keys into the Users table where their name, address, etc. are stored. What I'd like to do is to pull all the rows from Order and have a join that pulls the user name and supervisor name from the User table all in one go. Right now I pull all the Orders with just user name joined, and then go back over the objects to add the supervisor name as a separate query.
The reason I'd like to do this is to simplify the objects I'm passing to the GridView by doing a single fetch instead of multiples. I'm using SQL Server, .NET 2.0 and VS.NET 2005.
Thanks
Hello fellow .net developers,
In a website I'm working on I need to be able to put all of the user tables in a database in a dropdownlist.
Another dropdownlist then will autopopulate itself with the names of all the columns from the table selected in the first dropdownlist.
So, what I need to know is: is there a sql statement that can return this type of information?
Example:
Table Names in Database: Customers, Suppliers
Columns in Customers Table: Name, Phone, Email, Address
I click on the word "Customers" in the first dropdownlist.
I then see the words "Name", "Phone", "Email", "Address" in the second dropdownlist.
I'm sure you all know this (but I'll say it anyways): I could hardcode this stuff in my code behind file, but that would be really annoying and if the table structure changes I would have to revise my code on the webpage. So any ideas on how to do this the right way would be really cool.
Thanks in advance,
Robert
In SQL Server you can do a SELECT INTO to create a new table, much like CREAT TABLE AS in Oracle. I'm putting together a dynamic script that will create a table with the number of columns being the dynamic part of my script. Got any suggestions that come to mind?
Example:
I need to count the number of weeks between two dates, my columns in the table need to be at least one for every week returned in my query.
I'm thinking of getting a count of the number of weeks then building my column string comma separated then do my CREATE TABLE statement rather then the SELECT INTO... But I'm not sure I'll be able to do that using a variable that holds the string of column names. I'm guess the only way I can do this is via either VBScript or VB rather then from within the database.
BTW - this would be a stored procedure...
Any suggestions would be greatly appreciated.
Project has 2 tables process(parent) and processchild(child).
Project workflow recorddsany changes to these tables as a history.
I want to find out all the process that are in status = saved(1) where processchild is at status = started(1).
Here is example.
Process table
PK, processid, status , other data
1, 1, 1,...
2, 1, 2,...
3, 2, 1,...
4, 3, 1,...
ProcessChild table
PK, processid, processchildid status, other data
1, 1, 1, 1,..
2, 1, 1, 2,..
3, 1, 2, 1,...
4, 1, 2, 2,...
5, 2, 1, 1,..
6, 2, 1, 2,...
7, 2, 2, 1,...
8, 3, 1, 1,..
I want to find out all the processes where processchildid=2 and processchild.status =1
Hi,I want to create a temporary table and store the logdetails froma.logdetail column.select a.logdetail , b.shmacnocase when b.shmacno is null thenselectcast(substring(a.logdetail,1,charindex('·',a.logde tail)-1) aschar(2)) as ShmCoy,cast(substring(a.logdetail,charindex('·',a.logdeta il)+1,charindex('·',a.logdetail,charindex('·',a.lo gdetail)+1)-(charindex('·',a.logdetail)+1))as char(10)) as ShmAcnointo ##tblabcendfrom shractivitylog aleft outer joinshrsharemaster bon a.logkey = b.shmrecidThis statement giving me syntax error. Please help me..Server: Msg 156, Level 15, State 1, Line 2Incorrect syntax near the keyword 'case'.Server: Msg 156, Level 15, State 1, Line 7Incorrect syntax near the keyword 'end'.sample data in a.logdetailBR··Light Blue Duck··Toon Town Central·Silly Street···02 Sep2003·1·SGL·SGL··01 Jan 1900·0·0·0·0·0.00······0234578······· ····· ··········UB··Aqua Duck··Toon Town Central·Punchline Place···02 Sep2003·1·SGL·SGL··01 Jan 1900·0·0·0·0·0.00·····Regards.
View 2 Replies View RelatedI am wondering if there is a direct query in this case:
I am developing a program to a company which simply sells services
One service may have different prices for different types of clients
The price of any service for any client can change at any time, and I should be able to trace these changes at any time
I made the following tables (simplified): (asterisk for primary key)
(Table) (Fields)
CLIENT_TYPES : ID*, ClientTypeName
SERVICES : ID*, ServiceName
PRICES : ServiceID*, ClientTypeID*, Price, Date*
ORDERS : ID*, Date, ClientTypeID
ORDER_SERVICES : OrderID*, ServiceID*
The field in bold is the area of the question
This is a sample data in the PRICES table:
ServiceID ClientTypeID Price Date1 1 100 1/1/20072 1 150 1/1/20071 2 90 1/1/20072 2 135 1/1/2007
Now if I want to update a price of service 1 for clienttype 1, I add the following row:
1 1 100 1/1/2008
So one product for one client can have any number of prices with different dates
The following query:
SELECT * FROM PRICES WHERE ClientTypeID = 1
will retrieve all prices with repeats for a specific client (#1 here)
What I want is a query to retrieve the most recent prices for specific client for all products, even if a query on query
If there is commemts on table design please tell me
thanks for any one who provides help
Is there a SELECT statement that will return a the column names of a given table?
View 5 Replies View RelatedHi guys,
anyone can help me?
i using sp to select a select statement from a join table. due to the requirement, i need to group the data into monthly/weekly basic.
so i already collect the data for the month and use the case to make a new compute column in the selete statement call weekGroup. this is just a string showing "week 1", "week 2" .... "week 5".
so now i want to group the weekgroup and disply the average mark. so i need to insert all the record from the select statement into the temporary table and then use 2nd select statement to collect the new data in 5 record only. may i know how to make this posible?
regards
terence chua
I have 2 tables in a 1: n relation. How can i get a select statement that the field in the n-relation with outputs, separated by a semicolon; Example: One person have many Job Titles
Table1 (tblPerson)
Table2 (tblTitles)
1, "John", "Miller", "Employee; Admin; Consultant"
2, "Joan", "Stevens", "Employee, Software Engineer, Consultant"
and so on .... 1 in select statement:
I want to update records in 1 table with the result of a select statement.
The table is called 'MPR_Portfolio_Transactions' and contains the following fields:
[PTR_SEQUENCE]
,[PTR_DATE]
,[PTR_SYMBOL]
,[PTR_QUANTITY]
,[PTR_ACUM]
And the select statement is like this:
SELECT SUM(PTR_QUANTITY) OVER (PARTITION BY PTR_SYMBOL ORDER BY PTR_DATE, PTR_SEQUENCE) AS 'ACUMULADO'
FROM MPR_portfolio_transactions
ORDER BY PTR_SYMBOL, PTR_DATE, PTR_SEQUENCE
This select statement generates one line per existing record. And what I would like to do next is to UPDATE the field 'PTR_ACUM' with the result of the 'ACUMULADO'
the key is PTR_SEQUENCE
I basically want to select all GRNID's from one table but they have to be between dates in another table.So I want all GRN's between two dates found in the ABSPeriodEndDate table. To find out the start date for the between clause I need to find the MAX Period then minus 1 and the max year. To find the end date of the between clause I want I need to find both the max period and year. But I want the DateStamp column to return the results for the between clause. My query is below:
SELECT tblGRNItem.GRNID
FROM tblGRNItem
INNER JOIN ABSPeriodEndDates ON tblGRNItem.DateCreated = ABSPeriodEndDates.DateStamp
WHERE tblGRNItem.DateCreated BETWEEN
(SELECT ABSPeriodEndDates.DateStamp FROM ABSPeriodEndDates WHERE ABSPeriodEndDates.DateStamp = (SELECT
[code]....
I have two tables with a 1-many relationship. I want to write aselect statement that looks in the table w/many records and comparesit to the records in the primary table to see if there are any recordsthat do not match based on a certain field.Here is how my tables are setup:Task Code TableTCode,TCodeFName,ActiveTracking Table(multiple records)ID,User,ProjectCode,TCode,Hours,DateI want to look at the tracking table and see if there are any TCodelisted here that are not listed in the Task Code table.How do I write a SQL statement to do this?
View 6 Replies View RelatedI am in doubt if its possible to make a select statement which enables me to consolidate multiple lines in the same table.
I have a table with a lot of companies and figures for each company.
Some of the companies owns some of the other companies in the table and in reverse, some of the companies are owned by some of the companies in the table.
I have a lot of columns, but basically the most important columns are:
Company Name, Company Mother , Company Daughter.
Each company has also a revenue column.
What I want to do is to consolidate all figures for absolute mothers e.i. companies which are not owned by another company in the list.
I therefore need a select statement which says something like:
Get the revenue of companies not owned by another company (e.i. absolute mother). Add to this, the revenue of all its daughters. Add to this the revenue of all the daughters daughters etc. until there are no daughters left.
In other words - aggregate the revenue for all the companies in the group under the name of the ultimate parent company.
I can easily select and add the revenue for the first level of direct daughters, but I dont know how many more daughters the daughters has etc.
Due to localization I have the need to make child tables, where there is a composite Primary Key, between the Id column and the LanguageSign column. On the parent table the Id column is Identity column with auto increment.
The problem is that during the select into query to copy columns from parent to child, this auto increment behaviour of the parent-Id is copied to the child-Id. However I do not want that, because the same Id will be used by different LanguageSign entries
Is there a way to use 'select into' without copying the auto increment, or is my only option to make a whole new column without auto increment on the child and copy the records?
Â
btw I have used this statement
SET
IDENTITY_INSERT MyTable
ON , so that inserting into the Id column is possible. I can see however that this does not take away the auto increment...
Hi,
I have a select statement running on the client machine linking to different tables in 1 database. All with the same schema. When I ran it, i had this error. I had trial and error, removing 1 table at a time until i hit the one which is causing it. when i removed it, everything's ok. i just wonder if all the tables were using dbo schema what is causing this particular table to throw this error?
cherriesh
Hi all
I have a Large log table with large size data(I month only),If I run a query like SELECT * FROM <table_name> Server will go€¦very very slow€¦.
Because of large Data system is going slow€¦..
Please some body helps me with suggestion how get good performance.
Hello... im having a problem with my query optimization....
I have a query that looks like this:
SELECT * FROM table1
WHERE location_id IN (SELECT location_id from location_table WHERE account_id = 998)
it produces my desired data but it takes 3 minutes to run the query... is there any way to make this faster?... thank you so much...
Hey gang,
I've got a query and I'm really not sure how to get what I need. I've got a unix datasource that I've setup a linked server for on my SQL database so I'm using Select * From OpenQuery(DataSource, 'Query')
I am able to select all of the records from the first two tables that I need. The problem I'm having is the last step. I need a field in the select statement that is going to be a simple yes or no based off of if a customer number is present in a different table. The table that I need to look into can have up to 99 instances of the customer number. It's a "Note" table that stores a string, the customer number and the sequence number of the note. Obviously I don't want to do a straight join and query because I don't want to get 99 duplicates records in the query I'm already pulling.
Here's my current Query this works fine:
Select *From OpenQuery(UnixData, 'Select CPAREC.CustomerNo, CPBASC_All.CustorCompName, CPAREC.DateAdded, CPAREC.Terms, CPAREC.CreditLimit, CPAREC.PowerNum
From CPAREC Inner Join CPBASC_All on CPAREC.CustomerNo = CPBASC_All.CustomerNo
Where DateAdded >= #12/01/07# and DateAdded <= #12/31/07#')
What I need to add is one more column to the results of this query that will let me know if the Customer number is found in a "Notes" table. This table has 3 fields CustomerNo, SequenceNo, Note.
I don't want to join and select on customer number as the customer number maybe repeated as much as 99 times in the Notes table. I just need to know if a single instance of the customer number was found in that table so I can set a column in my select statement as NotesExist (Yes or No)
Any advice would be greatly appreciated.
I have a stored procedure that I have written that manipulates date fields in order to produce certain reports. I would like to add a column in the dataset that will be a join from another table (the table name is Periods).
The structure of the periods table is as follows:
[ID] [int] NOT NULL,
[Period] [int] NULL,
[Quarter] [int] NULL,
[Year] [int] NULL,
[PeriodStarts] [date] NULL,
[PeriodEnds] [date] NULL
The stored procedure is currently:
USE [International_Forecast_New]
GO
/****** Object: StoredProcedure [dbo].[GetOpenResult] Script Date: 01/07/2014 11:41:35 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
[Code] ....
What I need is to add the period, quarter and year to the dataset based on the "Store_Open" value.
For example Period 2 looks like this
Period Quarter Year Period Start Period End
2 1 20142014-01-27 2014-02-23
So if the store_open value is 02/05/2014, it would populate Period 2, Quarter 1, Year 2014.
Consider the below code: I am trying to find a way so that my select statement (which will actually be used to insert records) can randomly place values in the Source and Type columns that it selects from a list which in this case is records in a table variable. I dont really want to perform the insert inside a loop since the production version will work with millions of records. Anyone have any suggestions of how to change the subqueries that constitute these columns so that they are randomized?
SET NOCOUNT ON
Declare @RandomRecordCount as int, @Counter as int
Select @RandomRecordCount = 1000
Declare @Type table (Name nvarchar(200) NOT NULL)
Declare @Source table (Name nvarchar(200) NOT NULL)
Declare @Users table (Name nvarchar(200) NOT NULL)
Declare @NumericBase table (Number int not null)
Set @Counter = 0
while @Counter < @RandomRecordCount
begin
Insert into @NumericBase(Number)Values(@Counter)
set @Counter = @Counter + 1
end
Insert into @Type(Name)
Select 'Type: Buick' UNION ALL
Select 'Type: Cadillac' UNION ALL
Select 'Type: Chevrolet' UNION ALL
Select 'Type: GMC'
Insert into @Source(Name)
Select 'Source: Japan' UNION ALL
Select 'Source: China' UNION ALL
Select 'Source: Spain' UNION ALL
Select 'Source: India' UNION ALL
Select 'Source: USA'
Insert into @Users(Name)
Select 'keith' UNION ALL
Select 'kevin' UNION ALL
Select 'chris' UNION ALL
Select 'chad' UNION ALL
Select 'brian'
select
1 ProviderId, -- static value
'' Identifier,
'' ClassificationCode,
(select TOP 1 Name from @Source order by newid()) Source,
(select TOP 1 Name from @Type order by newid()) Type
from @NumericBase
SET NOCOUNT OFF
In Code Behind, What is proper select statement syntax to retrieve the @BName field from a table?Using Visual Studio 2003SQL Server DB
I created the following parameter:Dim strName As String Dim parameterBName As SqlParameter = New SqlParameter("@BName", SqlDbType.VarChar, 50) parameterBName.Value = strName myCommand.Parameters.Add(parameterBName)
I tried the following but get error:Dim strSql As String = "select @BName from Borrower where BName= DOROTHY V FOWLER "
error is:Line 1: Incorrect syntax near 'V'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Line 1: Incorrect syntax near 'V'.
Source Error:
Line 59: Line 60: Line 61: myCommand.ExecuteNonQuery() 'Execute the query
I have created a trigger that is set off every time a new item has been added to TableA.The trigger then inserts 4 rows into TableB that contains two columns (item, task type).
Each row will have the same item, but with a different task type.ie.
TableA.item, 'Planning'
TableA.item, 'Design'
TableA.item, 'Program'
TableA.item, 'Production'
How can I do this with tSQL using a single select statement?
I am currently having this problem with gridview and detailview. When I drag either onto the page and set my select statement to pick from one table and then update that data through the gridview (lets say), the update works perfectly. My problem is that the table I am pulling data from is mainly foreign keys. So in order to hide the number values of the foreign keys, I select the string value columns from the tables that contain the primary keys. I then use INNER JOIN in my SELECT so that I only get the data that pertains to the user I am looking to list and edit. I run the "test query" and everything I need shows up as I want it. I then go back to the gridview and change the fields which are foreign keys to templates. When I edit the templates I bind the field that contains the string value of the given foreign key to the template. This works great, because now the user will see string representation instead of the ID numbers that coinside with the string value. So I run my webpage and everything show up as I want it to, all the data is correct and I get no errors. I then click edit (as I have checked the "enable editing" box) and the gridview changes to edit mode. I make my changes and then select "update." When the page refreshes, and the gridview returns, the data is not updated and the original data is shown. I am sorry for so much typing, but I want to be as clear as possible with what I am doing. The only thing I can see being the issue is that when I setup my SELECT and FROM to contain fields from multiple tables, the UPDATE then does not work. When I remove all of my JOIN's and go back to foreign keys and one table the update works again. Below is what I have for my SQL statements:------------------------------------------------------------------------------------------------------------------------------------- SELECT:SELECT People.FirstName, People.LastName, People.FullName, People.PropertyID, People.InviteTypeID, People.RSVP, People.Wheelchair, Property.[House/Day Hab], InviteType.InviteTypeName FROM (InviteType INNER JOIN (Property INNER JOIN People ON Property.PropertyID = People.PropertyID) ON InviteType.InviteTypeID = People.InviteTypeID) WHERE (People.PersonID = ?)UPDATE:UPDATE [People] SET [FirstName] = ?, [LastName] = ?, [FullName] = ?, [PropertyID] = ?, [InviteTypeID] = ?, [RSVP] = ?, [Wheelchair] = ? WHERE [PersonID] = ? ---------------------------------------------------------------------------------------------------------------------------------------The only fields I want to update are in [People]. My WHERE is based on a control that I use to select a person from a drop down list. If I run the test query for the update while setting up my data source the query will update the record in the database. It is when I try to make the update from the gridview that the data is not changed. If anything is not clear please let me know and I will clarify as much as I can. This is my first project using ASP and working with databases so I am completely learning as I go. I took some database courses in college but I have never interacted with them with a web based front end. Any help will be greatly appreciated.Thank you in advance for any time, help, and/or advice you can give.Brian
View 5 Replies View RelatedOk I have a query "SELECT ColumnNames FROM tbl1" let's say the values returned are "age,sex,race".
Now I want to be able to create an "update" statement like "UPATE tbl2 SET Col2 = age + sex + race" dynamically and execute this UPDATE statement. So, if the next select statement returns "age, sex, race, gender" then the script should create "UPDATE tbl2 SET Col2 = age + sex + race + gender" and execute it.