right now I am able to retrieve the month and year from a field by month(TS_Date), Year(TS_Date), my question is can I put both results as one so output can say Date 2 2008 instead of two columns with month 2 year 2008.
any help would be appreciated
I'm using the designer to create/modify strongly typed datasets. I have one select statement that I'm having considerable trouble with. The user selects search parameters from a form. These search parameters are used to filter the data sent to a gridview control. Three of these parameters are almost enough to make me abandon the dataset in this case.The first two are minimum and maximum age. I have a birth date field, but not an age field - ages have a habit of changing without user intervention <grin> and can be calculated. In ASP I'd do something like this:strSQL = "SELECT [DATE OF BIRTH], [FIRST NAME], [LAST NAME], [STATE], [MALE OR FEMALE] FROM members WHERE (DateDiff(yyyy, [DATE OF BIRTH], '" & date & "') >= " & strLowerAge & ") AND (DateDiff(yyyy, [DATE OF BIRTH], '" & date & "') <= " & strUpperAge & ")" I can't figure out how to get datediff working in the designer much less testing against upper and lower age limits.The third parameter is astrological sign. Again, I calculate it based on the birth date. I don't have a field for it. I could, but I would have to modify all the pages that add or edit records to the database to insure all the records that have birth dates also have the right sign. I'm leaning in that direction, but is it possible to accept a sign as a parameter and calculate, based on the birth date, which records qualify? I need to get the age issue fixed. The sign is a nice to have, since I can do it another way if I have to. BTW: I did decide to abandon the dataset in favor of a SqlDataSource control. This allowed me to build my select string in the code behind the way I would have in ASP. This resulted in paging and sorting not working properly. Sorting would be nice, paging is necessary. I'm pretty sure going back to the dataset or using a stored procedure would fix the paging problem, and I've yet to work with stored procedures (it's on my list of things to learn). Any comments or feedback on this would be avidly read and appreciated.Diane
View 8 Replies View RelatedHello... im having a problem with my query optimization....
I have a query that looks like this:
SELECT * FROM table1
WHERE location_id IN (SELECT location_id from location_table WHERE account_id = 998)
it produces my desired data but it takes 3 minutes to run the query... is there any way to make this faster?... thank you so much...
have a table with students details in it, i want to select all the students who joined a class on a particular day and then i need another query to select all students who joined classes over the course of date range eg 03/12/2003 to 12/12/2003.
i have tried with the following query, i need help putting my queries together
select * from tblstudents where classID='1' and studentstartdate between ('03/12/2004') and ('03/12/2004')
when i run this query i get this message
Server: Msg 242, Level 16, State 3, Line 1
The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.
the studentstartdate field is set as datetime 8 and the date looks like this in the table 03/12/2004 03:12:15
please help
mustfa
Hi
This is really bugging me. All I want to do is add a date in an update statement but when I do it, its adding the wrong date e.g.
here is my update statement trying to update a date field
update tbl_x set [date]=01/02/2006 where id = 1 when i do this the data comes back as 1900-01-01 00:00:00.000, am I doing something wrong, what is the correct way of doing this. Thanks.
Hi i am trying to write a statement to get the players in a squad based on the StartDate, EndDate of any season and the DateEntered, DateLeft a squad
the possible situations are
Player joins squad after StartDate and is still there (DateLeft Null)
Player joins squad after StartDate and leaves before EndDate
Player joins before StartDate and is still there (DateLeft Null)
Player joins before StartDate and leaves before EndDate
this is my statement at the moment but i am gettin players that are in the squad this season and last season sp if anyone has any ideas i would really appreciate them
select spm.SquadId,Person.Id as ID, IsNull(firstName+ ' ','') + IsNull(MiddleName+ ' ','') + IsNull(LastName,'') as Name, spm.DateEntered, spm.DateLeft
From Person
LEFT JOIN SquadPlayerMapping spm on spm.PlayerId = Person.Id
Where spm.SquadId = 2927
And ((spm.DateLeft IS NULL) Or (spm.DateEntered >= (Select StartDate From Seasons Where ID = 50)))
And spm.DateEntered <= (Select EndDate From Seasons Where ID = 50)
Order by LastName
thanks in advance
Tim
I have following SQL statement which I run on an Access database. ( Program written in VB.NET )
'---------
SELECT c.*
FROM Communications AS c
WHERE CommDate Between #1/4/2005# And #5/4/2005#;
'------------
I've put dummy values in the database for dates between 1st and 8th of april... And running this query suprisingly gives back ALL rows in the table... Also the entries for the 6th, 7th and 8th of april... In fact it just gives back the WHOLE table, no matter which values I add...
If I use '1/4/2005' (not with #) then I get an error back.
Anybody an Idea how to make a BETWEEN statement work in an access database?
Thanks,
Frederik
SELECT
SUM(((CASE WHEN
o.date>= a.activity_date, other filter condition, other filter condition
THEN
(select coalesce(d.balance,d2.balance) from drawtable d where coalesce(d.date, d2.date) < a.activity_date order by d.date desc limit 1) - ( select coalesce(d.balance, d2.balance) from drawtable d where coalesce(d.date, d2.date) = interval 'current date'
else end ))
from
emailtable a
LEFT JOIN opportunity o
left join drawtable d
left join drawtable d2
etc
The tricky part is I'm joining that same table twice.....would this be better in a max/min case when statement?
Hi all,
I have a database with a field which contains a load of dates in this format 01/03/1998
What I want to do is select all the records from the database where the month of the date is what ever, this month or the month the customer selected etc.
I suspected it may be something like the following (which doesnt work)
sql = "SELECT * FROM avail_lowermill WHERE CH_Arrival.month = " & showmonth & " ORDER by CH_Arrival"
Can anyone suggest how I can do this?
Thanks in advance
How would I go about selecting a datetime field for a date range?
e.g.
$start_date = 04/11/2007
$end_date = $05/11/2007
I would have thought it would be something like this:
SELECT * FROM order_details BETWEEN $start_date AND $end_date
BUt I cannot get it to work in MS SQL? Would it be anything to do with the data stored such as 5/11/2007 12:00:00 AM
I´m struggling to get the following query:
Sales for the Last day of the month – sales for the last day of the previous month
Grouped by type and by month
DECLARE @sales TABLE
(type VARCHAR(10) NOT NULL,
date1 DATE NOT NULL,
sales NUMERIC(10, 2) NOT NULL);
INSERT INTO @sales(type, date1, sales)
[Code] ....
I have the following table of data. I need to take a date from a large table and do the following case:CASEWhen date < date(0) Then '0'When date between date(0) and date(1) Then '1'When date between date(1) and date(2) Then '2'When date >= date(3) Then '3'What I need is to be able to read all the dates the the Date table, sort then chronologically, and build the dynamic CASE statement so that the first When statement is < Date(0) and the last When statement is >= Date(Last)I hope I am making sense. Dates will be added to the table about once a year or so and I don't want to keep going back into the sql function and rewrite it with the latest date. Any ideas how to manipulate these dates into a case statement? Don't worry about the second table below. I just wanted you to see why I need to return an int from the Case function.thanksMilton
Dates Table
Date
4/1/2003
1/1/2006
4/2/2007
Fee Table
Date
Period
Class
Fee
1
Daily
True
329
1
Half Day
True
178
1
OT
True
49
1
Hourly
True
41
1
Daily
False
156
1
Half Day
False
86
1
OT
False
27
1
Hourly
False
19
2
Daily
True
355
2
Half Day
True
192
2
OT
True
50
2
Hourly
True
44
2
Daily
False
171
2
Half Day
False
92
2
OT
False
28
2
Hourly
False
21
3
Daily
True
364
3
Half Day
True
197
3
OT
True
51
3
Hourly
True
45
3
Daily
False
175
3
Half Day
False
94
3
OT
False
29
3
Hourly
False
21
I am currently having this problem with gridview and detailview. When I drag either onto the page and set my select statement to pick from one table and then update that data through the gridview (lets say), the update works perfectly. My problem is that the table I am pulling data from is mainly foreign keys. So in order to hide the number values of the foreign keys, I select the string value columns from the tables that contain the primary keys. I then use INNER JOIN in my SELECT so that I only get the data that pertains to the user I am looking to list and edit. I run the "test query" and everything I need shows up as I want it. I then go back to the gridview and change the fields which are foreign keys to templates. When I edit the templates I bind the field that contains the string value of the given foreign key to the template. This works great, because now the user will see string representation instead of the ID numbers that coinside with the string value. So I run my webpage and everything show up as I want it to, all the data is correct and I get no errors. I then click edit (as I have checked the "enable editing" box) and the gridview changes to edit mode. I make my changes and then select "update." When the page refreshes, and the gridview returns, the data is not updated and the original data is shown. I am sorry for so much typing, but I want to be as clear as possible with what I am doing. The only thing I can see being the issue is that when I setup my SELECT and FROM to contain fields from multiple tables, the UPDATE then does not work. When I remove all of my JOIN's and go back to foreign keys and one table the update works again. Below is what I have for my SQL statements:------------------------------------------------------------------------------------------------------------------------------------- SELECT:SELECT People.FirstName, People.LastName, People.FullName, People.PropertyID, People.InviteTypeID, People.RSVP, People.Wheelchair, Property.[House/Day Hab], InviteType.InviteTypeName FROM (InviteType INNER JOIN (Property INNER JOIN People ON Property.PropertyID = People.PropertyID) ON InviteType.InviteTypeID = People.InviteTypeID) WHERE (People.PersonID = ?)UPDATE:UPDATE [People] SET [FirstName] = ?, [LastName] = ?, [FullName] = ?, [PropertyID] = ?, [InviteTypeID] = ?, [RSVP] = ?, [Wheelchair] = ? WHERE [PersonID] = ? ---------------------------------------------------------------------------------------------------------------------------------------The only fields I want to update are in [People]. My WHERE is based on a control that I use to select a person from a drop down list. If I run the test query for the update while setting up my data source the query will update the record in the database. It is when I try to make the update from the gridview that the data is not changed. If anything is not clear please let me know and I will clarify as much as I can. This is my first project using ASP and working with databases so I am completely learning as I go. I took some database courses in college but I have never interacted with them with a web based front end. Any help will be greatly appreciated.Thank you in advance for any time, help, and/or advice you can give.Brian
View 5 Replies View RelatedI have a sqlDataSource control that has its select command and parameters set dynamically. One of the parameters is a date, which should be in smalldatetime format (ie, 12/22/2006). Obviously, using SQL Server, the data is stored with both date and time. The problem is, I cannot get any data selected. I initially thought that I needed to tell it to only look at the date and not the time, but from what I have seen this should work. Here is the pertinent code.
dim seldate as datetime
selDate = Session("ChosenDate")
Dim SelCmd As String = "SELECT [PatientName], [AssignedTo], [CPT], [CPT2], [HospitalID], [RoomNbr], [ACType], [TxDx1], [TxDx2], [MRNbr], [Notes], [PatientID], [PCPID], [ResidentID], [Status], [CaseID], [AdmitDate], [crtd_datetime] FROM [DailyBilling] WHERE ([crtd_datetime] = @crtd_datetime) and ([AssignedTo] = @AssignedTo) and ([HospitalID] = @HospitalID) ORDER BY [PatientName]"
SqlDataSource1.SelectCommand = SelCmd
SqlDataSource1.SelectParameters.Clear()
Dim parFilterProvider As New ControlParameter()
parFilterProvider.ControlID = "ddlProvider"
parFilterProvider.Name = "AssignedTo"
parFilterProvider.Type = TypeCode.String
SqlDataSource1.SelectParameters.Add(parFilterProvider)
Dim parFilterHospital As New ControlParameter()
parFilterHospital.ControlID = "ddlHospitals"
parFilterHospital.Name = "HospitalID"
parFilterHospital.Type = TypeCode.String
SqlDataSource1.SelectParameters.Add(parFilterHospital)
Dim parFilterStatus As New Parameter()
parFilterStatus.Name = "crtd_datetime"
parFilterStatus.DefaultValue = selDate.ToShortDateString
parFilterStatus.Type = TypeCode.DateTime
SqlDataSource1.SelectParameters.Add(parFilterStatus)
Gridview1.databind()
Any ideas?
Hi everyone,
I've got a problem that I've been unable to work out.
I'm wanting to count the number of people that fall into a specific age group. For simplicity, lets say I'm JUST after people that are 10 years old.
This is what I'm trying to do:
SELECT 'Aged 10 years old', count(*)
FROM [People]
WHERE ([DOB] + [Date Entered]) = ?5 years?
Does anyone have a solution to this?
Thanks
Andrew
I am trying to select all records added between 2 dates that the user inputs into a form and am having problems. I had this working no problems with asp but can't seem to get it working with .net. BTW I am using SQL Server and Visual Studio.
The asp.net code I am trying to use is:
Me.SqlSelectCommand1.CommandText = "SELECT news_title, news_date, news_type, news_link FROM news WHERE (news_type = 'news') AND (news_date BETWEEN CONVERT(DATETIME, '"" & startdate & ""', 102) AND CONVERT(DATETIME, '"" & enddate & ""', 102))"
....
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim startdate As DateTime
startdate = Request.Form("date_from")
Dim enddate As DateTime
enddate = Request.Form("date_to")
SqlDataAdapter1.Fill(DataSet1)
Repeater1.DataSource = DataSet1
Repeater1.DataBind()
End Sub
With this I am getting the following error:
"Syntax error converting datetime from character string. "
So I am assuming it is something to do with the way I am getting the date from the form as when I hardcode the dates in it works???
Any help would be greatly appreciated, thanx
I have a table with
EmpNum, Date, Abstype
What I want is to pull a list of all the employees and the Monday date of employees who have an absence on a Monday --> Friday consecutively.
eg Table
EmpNum, Date, Abstype
001 07/23/2012 VAC *Monday
001 07/24/2012 VAC
001 07/25/2012 VAC
001 07/26/2012 VAC
001 07/27/2012 VAC
003 07/23/2012 VAC * Monday
[code]...
As these are the 2 that run from monday-friday
My table contains three records as an example
item boxes quantity date
CH 20 16 10/09/2007
CH 10 20 11/09/2007
CH 15 16 12/09/2007
using the request:
SELECT item, sum(boxes), quantity FROM transactions WHERE (item = 'CH' AND date_recvd BETWEEN '09-09-2007' AND '12-09-2007') GROUP BY item, quantity
I get:
CH 35 16
CH 20 10
but if I change my date parameters to:
SELECT item, sum(boxes), quantity FROM transactions WHERE (item = 'CH' AND date_recvd BETWEEN '09-09-2007' AND '10-09-2007') GROUP BY item, quantity
I still get:
CH 35 16
CH 20 10
My query syntax is obviously incorrect. What should it be please?
Ok I have a query "SELECT ColumnNames FROM tbl1" let's say the values returned are "age,sex,race".
Now I want to be able to create an "update" statement like "UPATE tbl2 SET Col2 = age + sex + race" dynamically and execute this UPDATE statement. So, if the next select statement returns "age, sex, race, gender" then the script should create "UPDATE tbl2 SET Col2 = age + sex + race + gender" and execute it.
hiI need to write a stored procedure that takes input parameters,andaccording to these parameters the retrieved fields in a selectstatement are chosen.what i need to know is how to make the fields of the select statementconditional,taking in consideration that it is more than one fieldaddedfor exampleSQLStmt="select"if param1 thenSQLStmt=SQLStmt+ field1end ifif param2 thenSQLStmt=SQLStmt+ field2end if
View 2 Replies View RelatedHi guys,
I have the query below (running okay):
Code Block
SELECT DISTINCT Field01 AS 'Field01', Field02 AS 'Field02'
FROM myTables
WHERE Conditions are true
ORDER BY Field01
The results are just as I need:
Field01 Field02
------------- ----------------------
192473 8461760
192474 22810
Because other reasons. I need to modify that query to:
Code Block
SELECT DISTINCT Field01 AS 'Field01', Field02 AS 'Field02'
INTO AuxiliaryTable
FROM myTables
WHERE Conditions are true
ORDER BY Field01
SELECT DISTINCT [Field02] FROM AuxTable
The the results are:
Field02
----------------------
22810
8461760
And what I need is (without showing any other field):
Field02
----------------------
8461760
22810
Is there any good suggestion?
Thanks in advance for any help,
Aldo.
I am trying to find an easy way to create multiple of just two date in a single sql statement.
E.G.
A statement using the parameters
@StartDate = '2015-01-01'
@EndDate = '2015-01-05'
Ends up with rows:
'2015-01-01'
'2015-01-02'
'2015-01-03'
'2015-01-04'
'2015-01-05'
What would be the best way to do this ?
Hello friends,
I want to use select statement in a CASE inside procedure.
can I do it? of yes then how can i do it ?
following part of the procedure clears my requirement.
SELECT E.EmployeeID,
CASE E.EmployeeType
WHEN 1 THEN
select * from Tbl1
WHEN 2 THEN
select * from Tbl2
WHEN 3 THEN
select * from Tbl3
END
FROM EMPLOYEE E
can any one help me in this?
please give me a sample query.
Thanks and Regards,
Kiran Suthar
I am attempting to run update statements within a SELECT CASE statement.
Select case x.field
WHEN 'XXX' THEN
 UPDATE TABLE1
  SET TABLE1.FIELD2 = 1
 ELSE
  UPDATE TABLE2
  SET TABLE2.FIELD1 = 2
END
FROM OuterTable x
I get incorrect syntax near the keyword 'update'.
I have a form that's filtering search results and porting to a gridview. The drop down is selecting from the date column of SQL, but i want it the default value to show all dates in the gridview. In a normal string field, you can just use "%", but a datetime field won't take this. What can i use to show all dates?
View 3 Replies View RelatedHi all,Right now I have this SELECT statement:SELECT MUSIC_PK, MUSIC_TITLE, MUSIC_TITLE2, MUSIC_ORIGINAL_SINGER Now I want to add a second SELECT statement (same as above, but with an additional column) if the record was added within the 10 days (while still select other records, I just need to select an additional column). How would I do that? The additional column that I want to select is called MUSIC_NEW (so I can display if the record is new within 10 days.) I have a column in my table named DATE_ADDED, how do I go to calculate if it's within the 10 days since the day it was added to the current time?Thank you very much,Kenny.
View 8 Replies View RelatedHi,
I need help. I want to select dates less than 15 months, as i am new to sql server , can anyone advise me.
I tried this query but it gave me the dates that are greater than 15 months
Selec calendardate from table
where calendardate < getdate()-457
Thanks
TSQL statement, it should select the first date of the month at 11:59 PMÂ as Firstdate and Closedate as 10 days later at 11:59 PM.
View 14 Replies View Related
I have one SQL Table with 2 columns as below
Column1: ProductionDate - DateTime - Not NULL
Column2: Quantity - Int - Not NULL
Now There are 2 Records in Table
1-1-2007, 5
1-3-2007, 7
Output of Result should be as below
1-1-2007 5
1-2-2007 0
1-3-2007 7
1-4-2007 0
1-5-2007 0
1-6-2007 0
.
.
.
1-31-2007 0
Means Query should return all the dates of Month with Quantity and if no entry in Table then 0 for Quantity.
How to Do it? Please suggest with Query
Table 1
ID PID From To Code
1 1 14/02/07 17/02/07 X
2 1 17/02/07 19/02/07 X
3 1. 19/02/07 23/02/07 E
4 1 26/02/07 28/02/07 X
5 1 1/4/07 1/5/07 E
6 2 01/03/07 03/03/07 X
7 2 04/03/07 10/03/07 X
8 2 10/03/07 14/03/07 E
Result
ID PID Date
4 1 26/02/07
7 2 04/03/07
I want to be able to create a select query on the above table. The table will show ID, PersonID (PID), From and to date, and code. If the code is X then the next €˜from record€™ should be the same date as the €˜to date€™. If the code is E then the next €˜to€™ date can be anytime after the previous €˜to€™ date.
I want to be able to report on all record where there is a day difference between the previous €˜to€™ date. I.e. ID 4 and 7 €“ the previous records both have an X and there is at least a days difference between the dates.
In the below code i want to use select statement for getting customer
address1,customeraddress2,customerphone,customercity,customerstate,customercountry,customerfirstname,customerlastname
from customer table.Rest of the things will be as it is in the following code.How do i do this?
INSERT INTO EMImportListing ("
sql += " CustId,Title,Description,JobCity,JobState,JobPostalCode,JobCountry,URL,Requirements, "
sql += " IsDraft,IsFeatured,IsApproved,"
sql += " Email,OrgName,customerAddress1,customerAddress2,customerCity,customerState,customerPostalCode,
[code]....
I have 3 tables, with this relation:
tblChats.WebsiteID = tblWebsite.ID
tblWebsite.AccountID = tblAccount.ID
I need to delete rows within tblChats where tblChats.StartTime - GETDATE() < 180 and where they are apart of @AccountID. I have this select statement that works fine, but I am having trouble converting it to a delete statement:
SELECT * FROM tblChats c
LEFT JOIN tblWebsites sites ON sites.ID = c.WebsiteID
LEFT JOIN tblAccounts accounts on accounts.ID = sites.AccountID
WHERE accounts.ID = 16 AND GETDATE() - c.StartTime > 180
I have a table with addresses and activity dates. I need to be able to retrieve the past 3 activity dates and see if the first and last occurred within 15 days. If so, I need to flag them.
Using max date gets me the last date but not the previous two. I was trying to use top 3 in desc order and that didnt seem to work either.