Select TOP 1 And Count Total Records At Same Time
Jun 7, 2012
I have a Select TOP 1 statement which works fine, but i also want to count the total records at the same time. This is my SQL
Code:
SELECT TOP (1) dbo.ClientOffers.ProductID, dbo.ClientOffers.ClientID, dbo.Offers.Offertext, dbo.Offers.Offerlink, dbo.Offers.Image, dbo.Offers.Cost
FROM dbo.ClientOffers INNER JOIN
dbo.Offers ON dbo.ClientOffers.OfferID = dbo.Offers.OfferID
WHERE (dbo.ClientOffers.ProductID = 1284) AND (dbo.ClientOffers.ClientID = 0)
How do i also count the total records?
View 7 Replies
ADVERTISEMENT
Nov 19, 2015
If I just use a simple select statement, I find that I have 8286 records within a specified date range.
If I use the select statement to pull records that were created from 5pm and later and then add it to another select statement with records created before 5pm, I get a different count: 7521 + 756 = 8277
Is there something I am doing incorrectly in the following sql?
DECLARE @startdate date = '03-06-2015'
DECLARE @enddate date = '10-31-2015'
DECLARE @afterTime time = '17:00'
SELECT
General_Count = (SELECT COUNT(*) as General FROM Unidata.CrumsTicket ct
[Code] ....
View 20 Replies
View Related
Feb 14, 2008
Hello, I am having problems with this query below:
1 SELECT Table1.Email AS Email,
2 Table2.UserName AS Username,
3 Table3.Members_Paid AS Paid,
4 (SELECT DISTINCT COUNT(*)
5 FROM Table3 AS e JOIN Table3 AS m
6 ON e.Members_Sponsor = m.Members_ID
7 WHERE (e.Members_Sponsor = m.Members_ID)) AS TotalRecords
8 FROM Table1 INNER JOIN
9 Table2 ON Table1.UserId = Table2.UserId INNER JOIN
10 Table3 ON Table2.UserId = Table3.UserID
11 WHERE (Table3.Members_Sponsor = @UserId)Basicly what I am trying to do is get all members that belong to a certain manager along with those members count total of members they have below them.The code above is giving me the count of the first member only, not different counts for each member.Hope you understand what I am trying to say and do here. Hope someone can help me out cause this hase been driving me crazy for a few days now.
View 1 Replies
View Related
Aug 29, 2005
i hv a problem in sql,
i) if in data hv time_start, time_end, date , id, how i can calculate the total time for very sesion user login
ii) how to make it if the total come out hv same id(may be two id hv two diffrent total), i want make it just one id then the total time...
post me at jeffliew2001@yahoo.com
View 6 Replies
View Related
Jul 17, 2006
Time Price Volume
090048 510 6749
090122 510 2101
090135 510 1000
090204 505 2840
090213 505 220
090222 505 1260
090232 505 850
090242 505 200
090253 510 1200
090313 510 570
090343 510 250
090353 510 160
Criteria
Retrieve records with independent price and its total volume per minute
SELECT SUBSTRING(st,1,4) AS Ttime,d_price AS Price,SUM(l_cum) AS Volume FROM cmd4
WHERE sd='20060717' AND serial='0455'
GROUP BY SUBSTRING(st,1,4),d_price,l_cum
Result of the above query: -
Time Price Volume
0900 510 6749
0901 510 1000
0901 510 2101
0902 505 200
0902 505 220
0902 505 850
0902 505 1260
0902 505 2840
0902 510 1200
0903 510 160
0903 510 250
0903 510 570
THE FOLLOWING RESULT STILL NOT A TOTAL FOR A MINUTE]
E.G
0901 510 1000
+
0901 510 2101
=
0901 510 3101 <- I NEED THIS
Can any one advice or give me tips over this. Please
View 3 Replies
View Related
Nov 23, 2007
Hello,
I am writing a piece of code in ASP.NET and I'd like to get the # of records on a table and used this code:
Dim ConnString As String = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source='G:Aco ProntoBSCBSC_v1.mdb'"Dim Con As New OleDbConnection(ConnString)
Dim Cmd As New OleDbCommand("SELECT COUNT(*) AS Expr1 FROM Metricas", Con)Dim reader As OleDbDataReader
Con.Open()
reader = Cmd.ExecuteReader()Dim NumMetr As Integer = Val(reader("Expr1"))
reader.Close()
Con.Close()
I am getting an error that that's no data in the table.
Any suggestions?
View 1 Replies
View Related
Jul 26, 2013
My table contains 1000 records,
I need to know the total record count with the below paging query
SELECT EmpName,Place
FROM EmplyeeDetails ORDER BY Place
OFFSET 10 ROWS FETCH NEXT 10 ROWS ONLY;
How to get?
View 2 Replies
View Related
Jun 9, 2004
Does anyone know how I can determine the number of page writes that have been performed during a set period of time? I need to figure out the data churn in that time period.
TIA
View 5 Replies
View Related
Aug 21, 2007
The following query returns a value of 0 for the unit percent when I do a count/subquery count. Is there a way to get the percent count using a subquery? Another section of the query using the sum() works.
Here is a test code snippet:
--Test Count/Count subquery
declare @Date datetime
set @date = '8/15/2007'
select
-- count returns unit data
Count(substring(m.PTNumber,3,3)) as PTCnt,
-- count returns total for all units
(select Count(substring(m1.PTNumber,3,3))
from tblVGD1_Master m1
left join tblVGD1_ClassIII v1 on m1.SlotNum_ID = v1.SlotNum_ID
Where left(m1.PTNumber,2) = 'PT' and m1.Denom_ID <> 9
and v1.Act = 1 and m1.Active = 1 and v1.MnyPlyd <> 0
and not (v1.MnyPlyd = v1.MnyWon and v1.ActWin = 0)
and v1.[Date] between DateAdd(dd,-90,@Date) and @Date) as TotalCnt,
-- attempting to calculate the percent by PTCnt/TotalCnt returns 0
(Count(substring(m.PTNumber,3,3)) /
(select Count(substring(m1.PTNumber,3,3))
from tblVGD1_Master m1
left join tblVGD1_ClassIII v1 on m1.SlotNum_ID = v1.SlotNum_ID
Where left(m1.PTNumber,2) = 'PT' and m1.Denom_ID <> 9
and v1.Act = 1 and m1.Active = 1 and v1.MnyPlyd <> 0
and not (v1.MnyPlyd = v1.MnyWon and v1.ActWin = 0)
and v1.[Date] between DateAdd(dd,-90,@Date) and @Date)) as AUPct
-- main select
from tblVGD1_Master m
left join tblVGD1_ClassIII v on m.SlotNum_ID = v.SlotNum_ID
Where left(m.PTNumber,2) = 'PT' and m.Denom_ID <> 9
and v.Act = 1 and m.Active = 1 and v.MnyPlyd <> 0
and not (v.MnyPlyd = v.MnyWon and v.ActWin = 0)
and v.[Date] between DateAdd(dd,-90,@Date) and @Date
group by substring(m.PTNumber, 3,3)
order by AUPct Desc
Thanks. Dan
View 1 Replies
View Related
Aug 5, 2015
I'm looking for a way of taking a query which returns a set of date time fields (probable maximum of 20 rows) and looping through each value to see if it exists in a separate table.
E.g.
Query 1
Select ID, Person, ProposedEvent, DayField, TimeField
from MyOptions
where person = 'me'
Table
Select Person, ExistingEvent, DayField, TimeField
from MyTimetable
where person ='me'
Loop through Query 1 and if it finds ANY matching Dayfield AND Timefield in Query/Table 2, return the ProposedEvent (just as a message, the loop could stop there), if no match a message saying all is fine can proceed to process form blah blah.
I'm essentially wanting somebody to select a bunch of events in a form, query 1 then finds all the days and times those events happen and check that none of them exist in the MyTimetable table.
View 5 Replies
View Related
May 25, 2015
below data,
Countery
parentid
CustomerSkId
sales
A
29097
29097
10
A
29465
29465
30
A
30492
30492
40
[code]....
Â
Output
Countery
parentCount
A
8
B
3
c
3
in my count function,my code look like,
 set buyerset as exists(dimcustomer.leval02.allmembers,custoertypeisRetailers,"Sales")
set saleset(buyerset)
set custdimensionfilter as {custdimensionmemb1,custdimensionmemb2,custdimensionmemb3,custdimensionmemb4}
set finalset as exists(salest,custdimensionfilter,"Sales")
Set ProdIP as dimproduct.dimproduct.prod1
set Othersset as (cyears,ProdIP)
(exists(([FINALSET],Othersset,dimension2.dimension2.item3),[DimCustomerBuyer].[ParentPostalCode].currentmember, "factsales")).count
it will take 12 to 15 min to execute.
View 3 Replies
View Related
Sep 25, 2007
Hi,
I am using a foreach file to loop through mdb files kept in a folder and then transfer them to Sql server.
I want to do the following -
Sum the total no. of rows in mdb while the package executes
Sum the total no of rows transferred to Sql server.
Write them to a database (InitialRowCnt, FinalRowCnt, PackageNm, UserNm)
Note: Total = Total rows in all mdb files. so if there are 10 mdb files with 10 rows each, total = 100.
I saw a RowCount transformation..but just dont know where to place and what to do with it.
thanks
View 2 Replies
View Related
Sep 21, 2013
I have to write a query to get the count() of the customer who has max sales in the last 6 months.my query is
Select Inv_Cust,Count(Inv_Cust) as Salescount From Inv_Header Group By Inv_Cust,Inv_Date Having Inv_Date Between MIN(Inv_Date) And DATEADD(MM,6,min(Inv_Date))
which gives me a result like
inv_cust ' Salescount
[code]...
How can I modify my existing query to get this.
View 2 Replies
View Related
Apr 26, 2007
I have a query that uses a CTE which looks similar to this
WITH cte_Products AS
(SELECT SELECT
ROW_NUMBER() OVER (ORDER BY ProductName ASC) AS RowNum,
RANK() OVER (ORDER BY id DESC) AS rank,
FROM Products
WHERE SomeColumn = @SomeVariable)
SELECT rownum,
columns,
(SELECT COUNT(*) FROM cte_Product) AS TotalRowCount
FROM cte_Product AS products
WHERE Rank <= @LastXItems
AND RowNum BETWEEN (@StartRowIndex + 1) and (@StartRowIndex + @MaximumRows)
ORDER BY RowNum
The (SELECT COUNT(*) FROM cte_Product) AS TotalRowCount is in there because I need the total row count that is queried by the CTE. But I feel like this is an inefficient way of doing this. I would just split out the query for the total row count, but then I have to do another sub query to get the rank again since rank is calculated using the Rank method. Does anyone have any ideas of how best to do this?
View 3 Replies
View Related
May 17, 2007
Iam using front page to dispalay my results.
At the bottom it shows me 1/10 i.e 1st page of 10 pages.
but what do i do if i want it to be shown as 1-10 out of 100 (if each page contains 10 results).
or it would be really good if i get count of both no. of recors as well as no. of pages.
View 2 Replies
View Related
Feb 26, 2007
I'm trying to return the total records with my query, but I'm getting the following error:
"Item cannot be found in the collection corresponding to the requested name or ordinal."
Here's my query:
set rsFind = conn.Execute ("Select Count(Incident_ID) as TotalCount, Incident_ID, ProblemDescriptionTrunc, Action_Summary, RootCause, Problem_Solution002, " _
& " AssignedTechnician, DATEADD(s, dbo.TTS_Main.DateClosed, '1/1/1970') AS DateClosed, DATEADD(s, dbo.TTS_Main.Date_Opened, '1/1/1970') AS DateOpened, AssignedGroup From tts_main Where ProblemDescriptionTrunc LIKE '%" & prob & "%' And Last_Name LIKE '%" & l_name & "%' " _
& " AND AssignedTechnician LIKE '%" & assigned_tech & "%' And Incident_ID LIKE '%" & ticketnum & "%' AND assignedgroup LIKE '%" & assigned_group & "%' " _
& " Order By DateClosed DESC ")
<%response.write rsfind("TotalCount")%>
Thanks for any help!
Dale
View 10 Replies
View Related
Jul 20, 2005
in my procedure, I want to count the number of rows that have erroredduring an insert statement - each row is evaluated using a cursor, soI am processing one row at a time for the insert. My total count tobe displayed is inside the cursor, but after the last fetch is called.Wouldn't this display the last count? The problem is that the count isalways 1. Can anyone help?here is my code,.... cursor fetchbegin ... cursorif error then:beginINSERT INTO US_ACCT_ERRORS(ERROR_NUMBER, ERROR_DESC, cUSTOMERNUMBER,CUSTOMERNAME, ADDRESS1, ADDRESS2, CITY,STATE, POSTALCODE, CONTACT, PHONE, SALESREPCODE,PRICELEVEL, TERMSCODE, DISCPERCENT, TAXCODE,USERCOMMENT, CURRENCY, EMAILADDRESS, CUSTOMERGROUP,CUSTINDICATOR, DT_LOADED)VALUES(@ERRORNUM, @ERRORDESC,@CUSTOMERNUMBER, @CUSTOMERNAME, @ADDRESS1, @ADDRESS2, @CITY,@STATE, @POSTALCODE, @CONTACT, @PHONE, @SALESREPCODE,@PRICELEVEL, @TERMSCODE, @DISCPERCENT, @TAXCODE,@USERCOMMENT, @CURRENCY, @EMAILADDRESS, @CUSTOMERGROUP,@CUSTINDICATOR, @DTLOADED)SET @ERRORCNT = @ERRORCNT + 1END --error--FETCH NEXT FROM CERNO_US INTO@CUSTOMERNUMBER, @CUSTOMERNAME, @ADDRESS1, @ADDRESS2, @CITY, @STATE,@POSTALCODE, @CONTACT,@PHONE,@SALESREPCODE, @PRICELEVEL,@TERMSCODE,@DISCPERCENT, @TAXCODE, @USERCOMMENT, @CURRENCY,@EMAILADDRESS,@CUSTOMERGROUP, @CUSTINDICATOR, @DTLOADED--IF @ERRORCNT > 0INSERT INTO PROCEDURE_RESULTS(PROCEDURE_NAME, TABLE_NAME, ROW_COUNT,STATUS)VALUES('LOAD_ACCOUNTS', 'LOAD_ERNO_US_ACCT', @ERRORCNT, 'FAILEDINSERT/UPDATE')END -- cursorCLOSE CERNO_USDEALLOCATE CERNO_US
View 1 Replies
View Related
Aug 3, 2007
Hello,
I have report in which I have created groups base on the customer name. Can anybody please tell me how to get the total page counts for the individual group? I have page break after every new group and I am able to reset page count to 1 when new group start but I am getting the total number of pages for a particular group.
For ex, let say I have 4 groups, 1 group has 3 page, 2 group has 2 pages and 3 group has 6 page and 4th group has 7 pages I need something like,
For 1st group
'Page 1 of 3€™ when user click next page it should be 'Page 2 of 3' etc
Similarly for other groups as wll.
Thanks!
View 3 Replies
View Related
Sep 15, 2015
I have a question regarding the total count of the table rows
Select count (name) from test. Lets say I have got 200 count. And Select count (lastname) from test1.I have got 200.And this counts I should store it in "There are nn name items awaiting your attention and nn pending lastname's awaiting your approval".
So now I have to store the count in 'nn'.
View 5 Replies
View Related
Dec 3, 2007
Hi,
I want to return the total number of rows and top n records from my query. Is it possible to do this by simply running a single query. My query is dynamic so I can not create any temp table or table variables.
Bacially I want to eliminate 2 calls for sp_executesql
Set @ColumnCount = "Count(*)"
Set @Columns = " Top 100 a,b,c"
Set @Filter = "a = 1001"
Set @sql = "select " + @ColumnCount + " FROM TABLEA WHERE " + @Filter
sp_executesql @Sql
Set @sql = "select " + @Columns + " FROM TABLEA WHERE " + @Filter
sp_executesql @Sql
Thanks
Pun
View 3 Replies
View Related
May 9, 2007
Hello,
I have a DB of professors and information related with them. I created the cube, it consist of:
Measures:
Measure group Professors:
Amount of projects (COUNT proj_id)
Amount of pulications (COUNT pub_id)
Amount of e_books (COUNT book_id)
--------------
Measure group Projects:
Distinct amount of projects (DISTINCT COUNT proj_id)
--------------
Measure group Publications:
Distinct amount of publications (DISTINCT COUNT pub_id)
--------------
Measure group E_books:
Distinct amount of e_books (DISTINCT COUNT book_id)
--------------
Calculated measures:
Amnt_Projects
iif ([Measures].[ Amount of projects ] = 0 OR [Measures].[ Amount of projects] = NULL,0,[Measures].[ Distinct amount of projects])
Amnt_Publications
(similar to the above one)
Amnt_E_books
(similar to the above one)
---------------------------
Dimensions:
dimPROFESSORS
- prof_id
-surname
-name
-gender
dimPROJECTS
- proj_id
-type name
-name
dimPUBLICATIONS
- pub_id
-type name
-name
dimE_BOOKS
- book_id
-name
Date_Projects
-date_id
-years
Date_Publications
-date_id
-years
Date_E_books
-date_id
-years
For example, when I browse the cube:
prof_id____Amount of projects___Distinct amount of projects___Amnt_Projects
1032------------------- 30 --------------------------1----------------1
1070-------------------90 --------------------------2----------------2
1111-------------------0 ---------------------------1----------------0
1137-------------------0 ---------------------------1----------------0
1234-------------------1404--------------------------9----------------9
1721-------------------504--------------------------7----------------7
2661-------------------85 --------------------------5----------------5
...--------------------...---------------------------...----------------...
6999------------------- 20---------------------------1-----------------1
9956-------------------50---------------------------5-----------------5
Unknown----------------(empty)---------------------(empty)-----------0
Grand Total------------ 2421------------------------11-----------------11
Grand Total “11“ is the amount of distinct projects +1 (because of the unknown member). So the last column shows the right amount of projects for the professor but I want Grand Total to sum those values and show, how many projects do the professors have (it should be „59“ if for all professors). How could I get the right value to be shown in Grand Total?
View 1 Replies
View Related
May 10, 2007
Hello,
I am using SQL Server 2005. I have a DB of professors and information related with them. I created the cube, it consist of:
Measures:
Measure group Professors:
Amount of projects (COUNT proj_id)
Amount of publications (COUNT pub_id)
Amount of e_books (COUNT book_id)
--------------
Measure group Projects:
Distinct amount of projects (DISTINCT COUNT proj_id)
--------------
Measure group Publications:
Distinct amount of publications (DISTINCT COUNT pub_id)
--------------
Measure group E_books:
Distinct amount of e_books (DISTINCT COUNT book_id)
Calculated measures:
Amnt_Projects
iif ([Measures].[ Amount of projects ] = 0 OR [Measures].[ Amount of projects] = NULL,0,[Measures].[ Distinct amount of projects])
Amnt_Publications
(similar to the above one)
Amnt_E_books
(similar to the above one)
---------------------------
Dimensions:
dimPROFESSORS
- prof_id
-surname
-name
-gender
dimPROJECTS
- proj_id
-type name
-name
dimPUBLICATIONS
- pub_id
-type name
-name
dimE_BOOKS
- book_id
-name
Date_Projects
-date_id
-years
Date_Publications
-date_id
-years
Date_E_books
-date_id
-years
For example, when I browse the cube:
prof_id____Amount of projects___Distinct amount of projects___Amnt_Projects
1032------------------- 30 --------------------------1----------------1
1070-------------------90 --------------------------2----------------2
1111-------------------0 ---------------------------1----------------0
1137-------------------0 ---------------------------1----------------0
1234-------------------1404--------------------------9----------------9
1721-------------------504--------------------------7----------------7
2661-------------------85 --------------------------5----------------5
...--------------------...---------------------------...----------------...
6999------------------- 20---------------------------1-----------------1
9956-------------------50---------------------------5-----------------5
Unknown----------------(empty)---------------------(empty)-----------0
Grand Total------------ 2421------------------------11-----------------11
Grand Total “11“ is the amount of distinct projects +1 (because of the unknown member). So the last column shows the right amount of projects for the professor but I want Grand Total to sum those values and show, how many projects do the professors have (it should be „59“ if for all professors). How could I get the right value to be shown in Grand Total?
View 2 Replies
View Related
Mar 30, 2015
We sell & ship packages that contain multiple items within them. The actual package (we call it the "parent item") is in the same table as the items within it ("child items"). If the record is a child item within a package, its "ParentId" field will contain the ItemId of the package.
So some sample records of a complete package would look like this:
ItemId | ParentId | Name | QtyAvailable
----------------------------------------
1 | NULL | Package A | 10
2 | 1 | Item 1 | 2
3 | 1 | Item 2 | 3
ItemId's 2 & 3 are items contained within the ItemId 1 package.
Now however, the client wants us to build a report showing all packages (all items where ParentId is NULL) however, they want to see the QtyAvailable of not only the package but the items as well (a total of 15 when using the example above), all grouped into a single line. So a sample report line would look like this:
Name | Available Qty
--------------------------
Package A | 15
Package B | 100
How can I do a SELECT statement that SUMS the "QtyAvailable" of both the parent & child items and displays them along with the package name?
View 6 Replies
View Related
Sep 11, 2015
I have a multi-value parameter that I am having a hard time writing a COUNT expression for in SSRS. Here is the situation:
1. If the "(Select All)" in the drop down is selected, COUNT all last names for ALL of the Auditor parameter
2. If a specific or multiple auditors are selected from the drop down, COUNT all last names based on that selection for the Auditor parameter
Currently, I am having it COUNT by ALL and it works but if a specific or multiple auditors are chosen, then the COUNT doesn't work.
View 3 Replies
View Related
Jul 14, 2015
I need to create a stored procedure for total count of the user's. If  User from front end  invites other user to use my tool, that user will be stored into a table name called "test",lets say it will be stored as"Invited 1 User(s)" or if he invites 2 users it will store into table as "Invited 2 User(s)."
But now we have changed the concept to get the ISID (name of the user) Â and now when ever the user invites from the front end, the user who have invited should stored in two tables "test" and " test1" table .
After we get the data into test and test1 table i need the total count of a particular user from both tables test and test1.
if i invite a user , the name of the user is getting stored in both test and test1 tables.Now i want to get the count of a user from both tables which should be 1,but its showing 2.
Reason: Why i am considering the count from 2 tables is because before we were not tracking the usernames and we were storing the count in single test table.,but now we are tracking user names and storing them in both tables(test and test1).
Here is my sample  code:
I need to sum it up to get the total user's from both the table but I should get 1 instead of 2Â
SELECT
(select distinct COUNT(*) from dbo.test
where New_Values like  '%invited%'
and Created_By= 'sam'
+
(select distinct count (*) Â from dbo.test1
where invited_by ='sam'
View 8 Replies
View Related
May 28, 2007
Hi,
I'm using sql server analysis services 2000, i have a problem with grand total when i select more than one member of any demension. the measure of this cube is built on a distinct count agregation function. i have only one measure in th cube
can some body help me !!
View 1 Replies
View Related
Mar 13, 2008
I have a SQL data source and i would like to present the total number of different records based on a "status" field.
I have done total records in the past by doing this:
protected void SqlDataSource1_Selected(object sender, SqlDataSourceStatusEventArgs e) { int RecordCount = e.AffectedRows; if (RecordCount == 1) { litRecordCount.Text = "1 record found"; } else { litRecordCount.Text = RecordCount.ToString() + " records found"; } }
This would work, howerver, my SQLdatasource choose * records, and not based on a WHERE condition. Is there any way to total just those with a status of "Initialized" ?
I tried to do it on the Gridview, but then I realized if I have paging on, it will only be on that front page.
thoughts?
View 3 Replies
View Related
Sep 27, 2001
Hi everbody,
I want find out Total number records in one table without using select statment.
Some body as told to me there is system table you can find total number of records. Any body give me systable name.
Thanks
Jack
View 2 Replies
View Related
Sep 27, 2001
Hi everbody,
I want find out Total number records in one table without using select statment.
Some body as told to me there is system table you can find total number of records. Any body give me systable name.
Thanks
Jack
View 1 Replies
View Related
Apr 25, 2014
Sample Table
USE [Testing]
GO
/****** Object: Table [dbo].[Testing] Script Date: 4/25/2014 11:08:18 AM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
[Code] ....
It seems to work fine with one million records.
Each primary key is unique, but the begindate is non-unique, and i guess even if i use datetime2 and add nanoseconds, from what i have read, there is a chance that i could have a duplicate datetime since the date is imported via XML from multiple sources.
View 7 Replies
View Related
May 14, 2008
I am re-writing a old query that update's it's value based on values at run time. Is there anyway to accomplish the following query where column s1.AI referances the values that were updated during run-time.
I want to avoid a Loop (i.e. cursor or a CTE).
Please help!
Declare @Stage Table(StartDate datetime,BenefitInterestID INT PRIMARY KEY, Amount MONEY, InterestAmount MONEY, Interest DECIMAL(10, 4), ai DECIMAL(10, 4))
Insert Into @Stage
Select
convert(datetime,'2006-12-01 00:00:00.000',101) as StartDate,1 as BenefitInterestID,1701.00 as amount,79.605 as InterestAmount ,0.1000 as Interest,0.0000 as ai
Union all
select '2007-12-01 00:00:00.000',2,172.80,7.92,0.0500,0
Union all
select '2008-12-01 00:00:00.000',4,0.00,0.00,0.0700,0
UPDATEs1
SETs1.ai = s1.Interest * coalesce((SELECT SUM(coalesce(s2.Amount,0) + coalesce(s2.InterestAmount,0)+coalesce(s2.ai,0)) FROM @Stage AS s2 WHERE s2.StartDate < s1.StartDate ),0)
FROM@Stage AS s1
select * from @Stage
My desired Results are
2006-12-01 00:00:00.00011701.0079.6050.10000.0000
2007-12-01 00:00:00.0002172.807.920.050089.0303
2008-12-01 00:00:00.00040.000.000.0700143.5300
But I am geting
2006-12-01 00:00:00.00011701.0079.6050.10000.0000
2007-12-01 00:00:00.0002172.807.920.050089.0303
2008-12-01 00:00:00.00040.000.000.0700137.2928
Due to as you can see on row 3 that the amount does not factor in the previous Years ai column when I sum, due to the update takes place at runtime.
Please help!
View 15 Replies
View Related
Oct 29, 2007
I've got the following query:
WITH OrderedResults AS (SELECT some_table.*, ROW_NUMBER() OVER (ORDER BY some_field) as RowNumber FROM some_table)
SELECT TOP 10 *
FROM OrderedResults
WHERE RowNumber > 10;
which works well for returning "paginated" recordsets. But when it comes to displaying "page" links and next and previous links, I need a total count of records found... something along the lines of the MySQL CALC_FOUND_ROWS feature...
Is there some built-in MSSQL feature I can use for this, or do I have to do a SELECT count(*) FROM some_table to get this data?
Any advice is appreciated
View 1 Replies
View Related
Apr 4, 2008
Hi,
I've got this
SELECT vehicleref, capID, make, model, derivative, COUNT(vehicleref) total, SUM(case when inStock=1 then 1 else 0 end) AS stock, (SELECT dealer FROM tblMatrixDealers WHERE id=dealerid) As Dealer FROM tblMatrixStock WHERE inStock = 1 GROUP BY vehicleref, capID, make, model, derivative, dealerid
I need to get the number in stock, i.e. when instock=1 and the total i.e. when instock=1 or 0
But the problem is i'm only showing records where instock=1 so my SUM(case when inStock=1 then 1 else 0 end) AS stock statement is useless.
Whats the best way to do this
Thanks
View 3 Replies
View Related
