I am working on a multi-page datagrid that pulls data from a database. The issue I am running into is the SQL select query. What I have is a table to 55 items. What I need to do is grab the first 35 of those items and bind the resulting DataReader to the grid, print the page, then grab the remaining 20 items, bind to the grid and print the page.
I can use "SELECT TOP 35 FROM Table" to get the first 35 items, but I don't know how to get the remaining 20 items. Is there a way to say something like "SELECT TOP 20 FROM Table" but specify only the rows that begin after row 35?
I tried doing this with an ArrayList but couldn't bind it to the DataGrid.
I would like to create a user defined SQL function which returns the number of rows which meets certain condition, and the average value of one of the culomns. I cannot find a code example for it. Please help.
Dear GroupI wonder whether you can give me a syntax example for a SQL Statement.Lets assume I've a table containing three columns ContactID (Primary Key),Firstname and Lastname.I would like to write a stored procedure which returns me the first tenrecords and increments an outside variable each time it runs.E.g If I run it the first time I pass the variable as 0 and it will returnme the first ten records and returns the variable value 1.When run a second time, I will pass the variable as 1 and it will return merecords 11-20 and sets the variable to 2 and so on...The difficult thing is how to tell to return me records 11-20. I can't usethe ContactID as someone might have deleted a row and e.g. ContactID 18 ismissing. In this case I only would get 9 rows returned. It always should beten.Thanks very much for your time and efforts!Kind Regards,Martin"There are 10 types of people in this world: Those that understand binaryarithmetic, and those that don't."
I have one table , suppose TableA which contains following columns..
I want to select records from this table where time difference is more than 2 min. (tec_insert_date) This means first record time and second one, then second one and third one..and so on..
How to select these records...pls give me some sql query...
A table has a column of int type. I need to select a fixed number of rows for each value. For example, if data in that column (c) are 5, 6, 7, and the number I want to select is 2, then I need 2 rows from c=5, 2 from c=6, and 2 from c=7. How to write that query? Any idea?
I have a table with entries tied to a membership database. The problemis that I want to select a limit of sixteen entries per member, perday, where some members have 16+ entries per day.I have this so far ( which I've simplified for this post)SELECT dbo.members.firstname, dbo.members.lastname,dbo.entries.gameDayFROM dbo.members INNER JOINdbo.entries ON dbo.members.memberID =dbo.entries.memberIDIf it's day 5, each member should have 80 total.How can I change this to select only 16 entries for each member, makingsure it's 16 per day based on dbo.entries.gameDay?Thanks for your help.
I have a SELECT statement with multiple JOINs. I want to number the rows returned by this SELECT statement. What's the easiest way to do this?
My current SELECT statement returns this:
ProjectId -- TaskId -- TaskName 123 Â - 111 -- Do something 123 Â - 222 -- Do something else 123 Â - 333 -- Do one more thing
I want to return this:
ProjectId -- TaskId -- TaskName -- Sequence 123  - 111 -- Do something  -- 1 123  - 222 -- Do something else  -- 2 123  - 333 -- Do one more thing  -- 3
Can anyone just point me in the right direction. All I want to do is add some T-SQL to an existing stored procedure to return the number of rows selected into a return value.Does anyone know how to do this?
I don't know whether anyone has this problem, but I am definitely not using the right keywords to search for a thread.
My situation is this...
I have a dataset that has values to fill cells to multiple tables in a report. However, I only want to select specific data from the dataset to fill textboxes and others. I cannot change the stored procedure, but the sample of the data is shown below:-
I know it looks weird, but the row really represents which "row" or textbox is it to fill with the Val. The Stat Column is just a way to make sure that I am filling the right values.
so my new report would have multiple tables to denote different categories. In my first table, I tried putting the cells as follows:- (expressions are highlighted in italics and bold)
I tried putting it into the headerrows instead of DetailRows, and it ended up printing the last value. Is there anyway to do this ? print all the values out in one table ? I tried using textboxes, but I think I got my expression wrong.
and it give me an error The value expression for the textbox €˜textbox5€™ contains an error: [BC30455] Argument not specified for parameter 'FalsePart' of 'Public Function IIf(Expression As Boolean, TruePart As Object, FalsePart As Object) As Object'.
Appreciate any advice or suggestion for this scenario !
Hi, How to display specific number of records? That means I want to display records starting from 3th row to 5th row. Please send your suggestions or links. Table ----- Name Age ----------------- Raja 23 Kumar 26 Suresh 30 Rani 22 Subha 32 Ganesh 25
The result will be Name Age ----------------- Suresh 30 Rani 22 Subha 32
I have a table called Employees which has lots of columns but I only want to count some specific columns of this table.
i.e. EmployeeID: 001
week1: 40 week2: 24 week3: 24 week4: 39
This employee (001) has two weeks below 32. How do I use the COUNT statement to calculate that within these four weeks(columns), how many weeks(columns) have the value below 32?
SELECT top 100 Ltrim([text]),objectid,total_rows,total_logical_reads , execution_count FROM sys.dm_exec_query_stats AS a CROSS APPLY sys.dm_exec_sql_text(a.sql_handle) AS b where last_execution_time >= '2015-04-07 10:01:01.01' ORDER BY execution_count DESC
But the result of execution count is from the first. I want to know it only one day.
I'll try to make this simple. I'm on SSRS 2005 and I have a report with a matrix object that has one row group and one column group. I need to switch the number format only for values where the column group has a specific value.
For example, here are the records in the table: Customer, Type, Amount Customer1, Revenue, -100 Customer2, Cost, 60 Customer1, Revenue, -200 Customer2, Cost, 125
By default the matrix object shows the following (the total comes from the standard subtotal on the column group): Revenue Cost Total Customer1 -100 60 -40 Customer2 -200 125 -75
But the users need the report to look like this, with all positives (why, oh why?! ): Revenue Cost Total Customer1 100 60 40 Customer2 200 125 75
I was able to use the inscope function to switch the signs of the Total numbers. But now I need to switch the signs of the Revenue column from negative to positive (and vice versa), without affecting the signs of the Cost column. It's strange to me because I CAN switch the signs for a specific row group (changing Customer1's number format, without affecting Customer2's format) using something like this:
But a similar expression specifying a column group value does not work, because the report seemingly doesn't recognize the value of the column group at all no matter what I do:
The other reason why this is strange is that I've done drill-through reports off of matrix objects where specific column group values (the ones clicked on) can be passed into the drill-through report parameters. So it recognizes the column group values upon drill-through, but not for formatting?
How else can I do this? I must be missing something here. Thanks.
declare @NumberToCompareTo int set @NumberToCompareTo = 8 declare @table table ( number int ) insert into @table select 4
[Code] ....
The query selects 4 and 5 of course. Now what I'm looking for is to retrieve the number less or equal to @NumberToCompareTo, I mean the most immediate less number than the parameter. So in this case 5
i m using row count in order to get first 16 rows from a specific table...now i want to get rows from row no. 16 to 32 (or any no which i want)...can any one tell meee how can i query it using sql server 200
I'm workung on a report which will both function as a online report but also as a printed sheet. i've got a table which has to be sortable, so i made a user sort. however, to fit the report onto a page, i had to make a additional header row, which contains only the sorting arrows. now, i'd like this row not to apear on the printed out version, how would i do this?
Alternativly, would it be possible to not show the user sort icons (down- and upwards arrows), but to make the header fields clickable? This would solve my problem as well.
I am trying to select all the data which are not associated with values older than a specific value.. For example I have:
paola -- 2 paola -- 3 paola -- 10
jessica -- 3 jessica -- 12
james -- 3 james -- 2 james -- 5
I want to query only those names, that are associated with numbers greater than 3. So, for this example, the result would be only Jessica. the others should be discarded.
I have a table, multiple columns, thousands of rows.
Six of the columns is the data that i need to work with...
col1, col2, col3, col4, col5, col6
col1 and col2 - go together - example. col1 = amount col2 = description col3 and col4 - go together col3 = amount col4 description col5 and col6 - go together col5 amount and 6 description
i need to pull search the table based on an auto number "id" and pull in the necessary two columns that correspond with a set value in the description.
example:
if col4 has "fee applied" in the description i need to pull the amount.
I'm no expert at SQL, I can't figure out how to solve that problem.
The following statement:
SELECT TeamMemberId, max(MonthId) as MonthId FROM Position INNER JOIN [Month] m INNER JOIN [Year] y ON m.YearId = y.Id AND (y.Id = @yearId OR y.Id < @yearId) ON m.Id = Position.MonthId GROUP BY TeamMemberId
Returns TeamMemberId MonthId 1 14 6 20
which is exactly what I want: The greates MonthId for each TeamMember in a specific year.
But I need more data for this postition, like the PositionName.
But the statement:
SELECT TeamMemberId, max(MonthId) as MonthId, PositionName FROM Position INNER JOIN [Month] m INNER JOIN [Year] y ON m.YearId = y.Id AND (y.Id = 2 OR y.Id < 2) ON m.Id = Position.MonthId GROUP BY TeamMemberId, PositionName
Returns TeamMemberId MonthId PositionName 1 2 ***. d. Geschäftsführung 6 20 ***. d. Geschäftsführung 1 14 CEO 6 16 CEO
The red rows are the ones I wanna get. How can I achieve that only the max. MonthId rows are returned, even when I need to select more columns? Any help is much appreciated.
I've a table that stores operationcode for each jobnumber. The jobnumber can have multiple operationcode. From the below DDL, I need to show all the jobs that have operation codes as 2001 and 2002. In the below DDL Jobnumber 80011 has both the operation codes 2001 and 2002 so this job will display on the report.
On the other hand Job 80021 only has operationcode 2001 and I do not want this job to show up on the report.
I need to show all the operationcodes for a job if it has operationcode 2001 and 2002.
USE tempdb; GO DECLARE @TEST_DATA TABLE ( DT_ID INT IDENTITY(1,1) NOT NULL PRIMARY KEY CLUSTERED , OperationCodeVARCHAR(10) NOT NULL , EmployeeCode VARCHAR(10) NOT NULL
Hello all, thanks in advance for any help you might be able to give.
I'm familiar with the Top command but I need something else to help in a project I'm working on.
I would like to select rows 1 through 100000 from a specific table in one query then 100001 through 200000 in a second query and 200001 through 300000 in a third and so on until I have gone through all rows. There happens to be 424000 in the table I'm working on.
