I have view with Patients name and Appointment table where I save those patients. In form I have 2 comboboxes. For PatientComboBox source is store procedure based on Patient view. For PatientAppintmentComboBox I would like to create store procedure.
How to create store procedure to display only one PatierntName record in PatientAppointmentComboBox if Patient_Id selected from PatientComboBox exist or not exist in Appointment?
Good day!
I just can't figure out how I can display only the top record for the duplicate records in my table.
Example:
Table1
Code Date
01 10/1/05
01 10/2/05
01 10/3/05
02 9/9/05
02 9/9/05
02 9/10/05
My desired result would be:
Table1
Code Date
01 10/1/05
02 9/9/05
Thanks.
I want to know how to display only each of it where in my database for example the ProductItem got a lot of value of '1000' in it. i only want it to display once.
ProductItem | Name
1000 | ABC
1000 | DEF
1000 | HIJ
2000 | KLM
3000 | NOP
I want in my dropdownlistbox only display 1000, 2000, 3000.
I using the 'Select ProductItem from Product' for sure it will display 1000,1000,1000,2000,3000. So to filter it.
Thanks
Hi Guys,
How do I display an item in a day? This is a featured product of the day. This will change everyday. I can do this in classic ASP but not in stored procedure.
Table:
This is just to give you an idea of the table
ID | ProductName | DatePosted
----------------------------------------
1 | item1 | 5/1/2008
2 | item2 | 1/2/2008
3 | item3 | 6/2/2007
and so on...
Can someone please help me?
Thanks in advanced.
Can you please assist me on how to get the 2nd record in case there are3 or more records of an employee, the query below gets the MAX and MINBasicSalary. However, my MIN Basic Salary is wrong because I should getthe Basic Salary Prior to the 1st Record (DESC)in case there are 3 ormore records and not the last Basic Salary of the Last Record.How to GET the 2nd Row of Record in Case that There are 3 or morerecords IN A SINGLE ROW ???---------------------------------------------------------------------------*-----This query gets the Max and Min Basic Salary on a certain Date Range.In case there are 5 records of an employee on certain date range howcan I get the record before the Max and would reflect as my OLDBASIC,if I use TOP2 DESC it will display 2 records. I only need one recordwhich should be the Basic Salary before the 1st record on a DESC order.Please add the solution to my 2nd Select Statement which get theOLDBASIC salary Thanks ...SELECT TOP 100 PERCENT E.EmployeeNo, E.LastName, E.FirstName,E.SectionCode, E.Department, E.DateHired, E.Remarks,(SELECT TOP 1 ([BasicSalary])FROM empsalaries AS T14WHERE T14.employeeno = E.employeeno AND startdate BETWEEN @FromDate AND@ToDateORDER BY startdate DESC) AS NEWBASIC,******************************* BELOW I SHOULD ALWAYS GET THE BASICSALARY PRIOR TO THE 1ST RECORD AND IN A SINGLE ROW ???(SELECT TOP 1 ([BasicSalary]) (FROM empsalaries AS T14WHERE T14.employeeno = E.employeeno AND startdate BETWEEN @FromDate AND@ToDateORDER BY startdate ASC) AS OLDBASICFROM dbo.Employees EWHERE CONVERT(VARCHAR(10),E.DateHired, 101) BETWEEN @FromDate AND@ToDate ORDER BY E.LastName
View 2 Replies View RelatedThis is my case. I want in my datagrid to display first record from table A and second record from table B. This is because i need to display a price in the column where it will have current price and history price, therefore the first row will be current price and second row will be history price.
This is the output that i trying to do.
Item | Price
-------|---------
A | 2.50 --------> Table A
A | 1.50 --------> Table B
Please let me know if my explanation is not details enough.
Thanks
I would like to display all the products with maximum SeqNo from the table below:
TABLE
ProductIDSeqNoBalance
111215
11135
111420
111510
12115
1212100
121325
121445
OUTPUT
ProductIDSeqNoBalance
111510
121445
I would like to show when leads updated last their records in database. An automated report that tells me when the last date was that the leads updated an entry, only 1 entry per lead.
select Lead,LastUpdated from dbo.KPITbl
I have a table with data that looks like this:
Lead LastUpdated
----------- -----------------------
JOHN SMITH 2008-03-26 08:45:00
JOHN SMITH 2008-03-20 09:33:00
MEG RYAN 2008-02-21 16:16:00
JOHN SMITH 2008-02-21 16:19:00
MEG RYAN 2008-02-21 16:22:00
JOHN SMITH 2008-03-28 16:10:00
JOHN SMITH 2008-03-28 08:49:00
JOHN SMITH 2008-03-23 19:23:00
MARK MCRAE 2008-03-27 03:12:00
MARK MCRAE 2008-03-26 08:48:00
MARK MCRAE 2008-03-26 08:46:00
JOHN SMITH 2008-03-26 08:47:00
JOHN SMITH 2008-03-26 08:48:00
ALLAN WHITE 2008-03-26 08:43:00
ALLAN WHITE 2008-03-26 08:40:00
JOHN SMITH 2008-03-26 08:48:00
Thank you appreciate it.
Do anybody know how can I find or display to the current SQL server 2005 record number (eg. 10 of 1600) on a VB 2005 form label. The BindingNavigator on the form has been deleted. Thanks.
View 6 Replies View RelatedI am duplicating a record from my asp.net page in to the database. When i click on save I am getting the following error message
Violation of PRIMARY KEY constraint 'PK_clientinfo'. Cannot insert duplicate key in object 'clientinfo'. The statement has been terminated.
The above message i am getting since i have tried to duplicate the clientname field of my table which is set as the primary key.
What i want is instead of this message in the browser i need to display an alert saying "the clientname entered already exists" by checking the value from the database.
Here is my code. pls modify it to achieve the said problem
if(Page.IsValid==true) { conn.Open(); SqlCommand cmd = new SqlCommand("insert into clientinfo (client_name, address) values ('"+txtclientname.Text+"', '"+txtaddress.Text+"')", conn); cmd.ExecuteNonQuery(); conn.Close(); BindData(); txtclear(); System.Web.HttpContext.Current.Response.Write("<script>alert('New Record Added!');</script>"); Response.Redirect("Clientinfo.aspx"); }
For my report I am trying to display images that are pulled from a database. Images are from separate records. I have the records I need in a dataset and now I want to set a Table Cell value to the field corresponding to the image. However, the next images/(records) are displayed on the next row (as expected i guess). How do I set the the records/values to be displayed across a single row?
What I have:
image1|
image2|
image3|
What i want:
image1|image2|image3|etc...
hi
i have a database that has multiple records under the same id (each time a record is updated, it's assigned a date_value), i'm wanting one row to be generated using the data from the most recent date_value field.
a sample of the database looks something like this:
ID date_value data1 24 march info11 25 march info2
my statement looks like this:select max(date_value), data from table_name where data is not null group by id
this seems to bring up the following error for all the fields not in the group by part of the code:Column 'COLUMN_NAME' is invalid in the select list because it is not contained in either an aggregate function or the GROUP BY clause.
what am i doing wrong?
TIA!
In a system holding data from questionnaires, I have two defined tables: one holding info on the respondent (r) and the other holding answer data (ad)
The layout of the respondent table:
r_idint
weekint
The layout of the answer data table:
ad_id int
r_idint
qvarchar(10)
a_valint
a_text varchar(50)
Each row in the ad table matches data for one question on the questionnaire.
Lets say a
<sql>
select *
from respondent r, answer_data ad
where r.r_id = ad.r_id
</sql>
returns the following data:
<result>
r_id, week, ad_id, r_id, q, a_val, a_text
1, 40, 1, 1, '1', 1, 'Destination 1'
1, 40, 2, 1, '2', 1, 'Bad'
1, 40, 3, 1, '3', 3, 'Good'
2, 40, 4, 2, '1', 2, 'Destination 2'
2, 40, 5, 2, '2', 2, 'Acceptable'
2, 40, 6, 2, '3', 4, 'Excellent'
3, 41, 7, 3, '1', 1, 'Destination 1'
3, 41, 8, 3, '2', 4, 'Excellent'
3, 41, 9, 3, '3', 4, 'Excellent'
</result>
Extracting the mean value of answers by week is easily done using the following select:
<sql>
select week, q, avg(cast(a_val as float)) mean
from respondent r, answer_data ad
where r.r_id = ad.r_id
and q > '1'
group by q, week
order by q, week
</sql>
This would give a result like:
<result>
week, q, mean
40, '2', 1.5
40, '3', 4.0
41, '2', 3.5
41, '3', 4.0
</result>
Now the tricky part - a result by destination (ad.q = '1') has been requested by the customer.
Doing a
<sql>
select q, avg(cast(a_val as float)) mean
from respondent r, answer_data ad
where r.r_id = ad.r_id
and q > '1'
and r.r_id in (
select r.r_id
from respondent r, answer_data ad
where r.r_id = ad.r_id and q = '1'
)
group by q
order by q
</sql>
returns the requested data:
<result>
q, mean
'2', 2.3333333333333335
'3', 3.6666666666666665
</result>
Only, it lacks info on the destination. What I need is something like this:
<result>
dest, q, mean
'Destination 1', '2', 2.5
'Destination 1', '3', 3.5
'Destination 2', '2', 2.0
'Destination 2', '3', 4.0
</result>
How can I achieve that?
Thanks,
Jacob Dall
Hi ..
i am SqL beginner. i having trouble output what i want from table.
table contain 3 columns
________________________________
|(names)|(item)|(location)|
1.| Jimmy | pizza| TX |
2.| Joe | ball | CA |
3.| Joe | ball | WA |
4.| Jim | shoes| AZ |
________________________________
i try to select all records out from this table. but column 2 and 3 contain same information in names and item only different is location. how can distinct one of them?? and display like the below, please advise.
|(names)|(item)|
1.| Jimmy | pizza|
2.| Joe | ball |
3.| Jim | shoes|
________________________________
How do I only display a part of data from the column ?
Lets say emp_id is E3456 and all i want to display is 3456 without that E?
I would like to exec a select statement in VB/C++ to return first 100 records? What is the SQL statement should be?
Thanks,
Sam
I've created a Stored Procedure which performs a Select against my table, and displays the rows returned via these stmts -
@RowCount int Output
SELECT @rowcount = @@RowCount
This Works fine when Executed from SQL Server, but when trying to invoke the SP from my ASP page it complains that the SP expects parameter '@RowCount' which was not supplied.
I don't need to supply it when invoking the SP directly, why do I need to supply it from ASP?
I tried defining it as NULL within my SP, but can't seem to get it to accept both the NULL & Output parms.
And while I'm at it, how do I get my ASP page to display this @RowCount value?
Many Thanks.
Dear All
I am trying to populate an OledbDatareader for binding to a ASP datagrid.
For this I use select statement to display combined fields in a datagrid cell.
Eg. Select (Field1+ '<br/>' + Field2 + '<br/>' + Field 3) As Address .. and so on.
But the problem is if any of the three field is null the combined field 'Address' returns as Null.
Please help me to overcome this problem.
Regards
kalanad ( beginner)
Hi,
I have a table called emp, having 2 field name & sex
values are:
name sex
a 1
b 2
c 1
now i want to display the values in above table as like below...
name sex
a Male
b Female
c Male
How to do that...?
I have a table with 3 fields. when I type
select * from test -- I am getting the results as below.
NAME AGE DEPT
AAA 23 AOD
BBB 27 NULL
CCC NULL NULL
DDD 23 POD
DEPT,AGE are displayed with "NULL" WHEN THERE IS NO value for that field . How can I eliminate this. I need space instead of NULL. When I export to text file there also contains NULL. Let me know how can I eliminate this.
Thanks in advance
I have built an Advanced Search page which allows users to select which columns to return (via checkbox) and to enter search criteria for any of the selected columns (into textboxes). I build the SQL statement from the properties of the controls. Works great.
My problem is getting my gridview control to play nicely. At first I used a SqlDataReader and bound the gridview to it, thus giving me the ability to run new SQL statements through it (with different columns each time). Worked nicely. But, per Microsoft, sorting can only be done if the gridview is bound to a datasource control like the SqlDataSource. So I wrote the code to handle sorting. No big deal; worked nicely. But I could not adjust the column widths programmatically unless bound to a datasource control like the SqlDataSource. And could not figure out a work around.
So, I decided to use the SqlDataSource. Works great. Except, I cannot figure out how to run a new SELECT statement through the SQLDataSource and have the gridview respond accordingly. If I try to return anything other than the exact same columns defined declaratively in the html, it pukes. But I need to be able to return a new selection of columns each time. For example, first time through the user selects columns 1,2,3,4 – the gridview should show those 4 columns. The second time the user selects columns 2,5,7 – the gridview should those 3 columns (and ONLY those 3 columns). Plus support selection and sorting.
I am desperate on this. I've burned 2.5 days researching and testing. Does anyone have any suggestions?
Thanks,
Brad
Select statement. In my database i am using the employee table. I need my first column to display your full name is 99 characters. so like if the employee is john smith it would display Your Full Name Is 9 characters (including the space).
View 2 Replies View RelatedI am trying to figure out a way to toggle the visibility of attribute data based on a parameter. Specifically, I have a report that has many columns that an end-user may not want to see, depending on what they are using the report for. I know you can toggle visibilities on individual columns easily enough, however I want the user to be able to select which fields (at the attribute level) they want visible on the report up in the parameters, via a multi-value prompt.
Is this possible with reporting services 2005?
Thanks.
Hello,I have a (big) table which is not normalized, but for i need at themoment i thinkthat's no problem. Indeed, what i would like to do is to select thename field andthe note. The problem is that i want to display the note in 2different columns.the first columns will show the number (count) of time that a certainnote (e.g note=4)appears for a certain name and in the other column the same thing butfor a different note value.so each column noteX will display the number of time that the notewith the value X appears for each namefor example, to the following table:Name | note | job | city | id |----------------------------------------john | 4 | jb1 | hamb | 1 |john | 5 | jb2 | hamb | 2 |john | 5 | jb3 | hamb | 3 |john | 5 | jb4 | hamb | 4 |Mark | 4 | jb1 | mun | 5 |Mark | 4 | jb2 | mun | 6 |Mark | 4 | jb5 | mun | 7 |Mark | 5 | jb1 | mun | 8 |peter | 5 | jb3 | berl | 9 |peter | 5 | jb5 | berl | 10 |frank | 4 | jb6 | v.form | 11 |frank | 5 | jb3 | v.form | 12 |frank | 5 | jb2 | v.form | 13 |the result should be:Name | note5 | note4 |-------------------------john | 3 | 1 |Mark | 1 | 3 |peter | 2 | 0 |frank | 2 | 1 |How should be the right SQL command to show the data i want?Rui DiasJoin Bytes!Thanks a lot
View 5 Replies View RelatedHi
Here is my example: I have the following table
ID Name Phone
--- ---- -----
1 John 1234567
1 John H.
2 Dave 9876543
2 Dave Smith
I want to select only one record of each ID, the output should be
ID Name Phone
--- ---- -----
1 John 1234567
2 Dave 9876543
It doesn't matter which record to select, but I need just a single complete record. I can't use select distinct ID because it will not show the other fieldnames.
Thanks
I have a sql query that looks for values in a few different databases....
is there a way to select the last record in the table b/c I am pulling the hours worked on jobs and one person may have 3 job titles but i want it to show the balance of hours under the most recent job... Instead all the jobs are showing the same value even though only one of them had those hours under it. I think a way to get around this is to select the last value b/c that is under the job title most recently worked and they are in order by timesheets which can be ordered by date...any ideas?
I have view with Patients name and Appointment table where I save those patients. How to create store procedure if I would like to select one patient record based on Patient_Id value?
View 3 Replies View RelatedHere the SELECT query is fetching the records corresponding to ITEM_DESCRIPTION in 5 separate transactions. How to change the cursor to display the 5 records in at a time in single transactions.
CREATE TABLE #ITEMS (ITEM_ID uniqueidentifier NOT NULL, ITEM_DESCRIPTION VARCHAR(250) NOT NULL)INSERT INTO #ITEMSVALUES(NEWID(), 'This is a wonderful car'),(NEWID(), 'This is a fast bike'),(NEWID(), 'This is a expensive aeroplane'),(NEWID(), 'This is a cheap bicycle'),(NEWID(), 'This is a dream holiday')
---
DECLARE @ITEM_ID uniqueidentifier
DECLARE ITEM_CURSOR CURSOR
[Code] ....
Hai frendz,
I am having a table named Employee(int EID, float Salary)...
Now I want to select the highest salary in the table and the query is-
"select top 1 EID, Salary from Employee ORDER BY Salary DESC"
Now I need to write a query which selects the second highest salary.
So how to achieve this?..
thanx
hi
I want to lock the record on select query so that no other user can update this record, is it possible and i want to unlock record when use stop view this record.
i have two tables A and B. relation is one to many for A. i want to select from A only if there are more than two records of A in table B and also checking some condition in table B. if the question's not very clear please let me know.
View 1 Replies View Relatedhow to select record from the table where the data between a range. example between 2/16/2005 and 12/16/2005. the data record in the table formated like this ( 2/16/2005 11:44:38 PM). help me with some sql code, thanks
View 2 Replies View RelatedHi,
I need to select first record from a table.
This can be comfortably achieved by usibg set rowcount 1.
I need to do this with out using rowcount.
This is urgent.
Thanks
Krishna