Hi all,
I'm having a bit of an issue with this query. I'm not that familiar with MS SQL so please forgive me.
I'm trying to select the bad email addresses in a table so I can remove them or correct them but I'm not getting any results that are helpfull. Bellow are some of the queries I've tried
select email from person where email != "*@*"
returned all addresses plus null fields.
select email from person where email not like "%@%" (this didn't work at all)
And a few other that are similar
Could somebody please kick me in the right direction.
what I want to achieve is to load a text file that has email addreses from disk and using the email addresses in the text file look it up against the email addresses in the database table then once matched delete all the users in the table whose email address were in the text file.
I also want to update some users using a different text file.
I have dumped html in a table and am looking to extract email addresses from it. Within the html, the email addresses are followed and preceded by blank spaces. I am playing around with the following code:
SELECT RIGHT(@email, LEN(@email) - CHARINDEX('@', @email)) as Domain
but have been unable to extract whole email addresses.
Is there a way to export a list of email addresses to outlook based on certain query conditions? So for example, lets say using pubs, I want to send out an email to a group of authors who have published only one book. So could I essentailly query for the authors and then have those corresponding authors emails sent to outlook so that I could send out a generic email asking them if they are going to write another book or something like that?
Name Address_line_1 sex city PID state legal_street zip_code legal_state ID legal_city mail_street mail_city mail_state mail_zip
My client needs. All Unique Addresses from the Source. . That is the duplicates should be removed and uniques should be available.
Please let me know first what he wants then also tell me what to use in the data flow and how to start. I want to understand the logic. Note: Two persons might have the same address or One address might belong to 2 or more people. This is what my client said.
"Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression"..It is about a Stored Procedure, which not only should output the number of opportunities with status "Pending" or "Accepted" but also the name of the opportunities with these statuses. Following points:
1. The SELECT that outputs the names of the opportunities may in some cases return more than one value. I created then the CURSOR CUR_TEST.
2. The code should return the names of Opportunities, namely after "The opportunities are:" and these must be sent to the recipients of an email. How can I do this, so the Names of the Opportunities and the rest of the email can be sent by email?. I mean, the concatenation with SET or SELECT doesn't work. I get as email only the output of the last row of the SELECT with cursor CUR_TEST.
I am trying to insert a carriage return in the select statement after the web link where I had highlighted code in bold. When I insert a record into the table, I receive the email with the message body is in single line.I need the result to look like this in the message body:
ALTER TRIGGER [dbo].[SendNotification] ON [dbo].[TicketsHashtags] FOR INSERT AS BEGIN -- SET NOCOUNT ON added to prevent extra result sets from
I hope someone can answer this, I'm not even sure where to start looking for documentation on this. The SQL query I'm referencing is included at the bottom of this post.
I have a query with 3 select statements joined together like tables. It works great, except for the fact that I need to declare a variable and make it a table within two of those 3. The example is below. You'll see that I have three select statements made into tables A, B, and C, and that table A has a variable @years, which is a table.
This works when I just run table A by itself, but when I execute the entire query, I get an error about the "declare" keyword, and then some other errors near the word "as" and the ")" character. These are some of those errors that I find pretty meaningless that just mean I've really thrown something off.
So, am I not allowed to declare a variable within these SELECT tables that I'm creating and joining?
Thanks in advance, Andy
Select * from
(
declare @years table (years int);
insert into @years
select
CASE
WHEN month(getdate()) in (1) THEN year(getdate())-1
WHEN month(getdate()) in (2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12) THEN year(getdate())
END
select
u.fullname
, sum(tx.Dm_Time) LastMonthBillhours
, sum(tx.Dm_Time)/((select dm_billabledays from dm_billabledays where Dm_Month = Month(GetDate()))*8) lasmosbillingpercentage
from
Dm_TimeEntry tx
join
systemuserbase u
on
(tx.owninguser = u.systemuserid)
where
Month(tx.Dm_Date) = Month(getdate())-1
and
year(dm_date) = (select years from @years)
and tx.dm_billable = 1
group by u.fullname
) as A
left outer join
(select
u.FullName
, sum(tx.Dm_Time) Billhours
, ((sum(tx.Dm_Time))
/
((day(getdate()) * ((5.0)/(7.0))) * 8)) perc
from
Dm_TimeEntry tx
join
systemuserbase u
on
(tx.owninguser = u.systemuserid)
where
tx.Dm_Billable = '1'
and
month(tx.Dm_Date) = month(GetDate())
and
year(tx.Dm_Date) = year(GetDate())
group by u.fullname) as B
on
A.Fullname = B.Fullname
Left Outer Join
(
select
u.fullname
, sum(tx.Dm_Time) TwomosagoBillhours
, sum(tx.Dm_Time)/((select dm_billabledays from dm_billabledays where Dm_Month = Month(GetDate()))*8) twomosagobillingpercentage
I'm trying to connect to a local instance of SQL Server using an IP address and its not working. When I looked up the connect string, it shows only the IP address replacing the Server name, not the instance name, i.e. Server=127.0.0.1 - how does it know which instance to use? Can I use the 127.0.0.1 loopback address for the server (as its on a local machine)? Do I have to use 'Network Library = DBMSSOCN' to tell the client to use TCP/IP? (TCP/IP is showing as an enabled protocol in the Client Network Utility)
I need to allow for many addresses in my database for each client that is entered. I'm looking for suggestions on how I should handle this. I will need to do mailings to the clients and will need a way to select the address record that the client indicates as the mailing place.
A quick question for you all, We will be changing the IP address of our SQL 7's server sometime next week. Does any1 know of any issues/problems that could occur if we do so?
I got got a pile of bad email addresses to update in our SQL database.I know how to do this for individual records using the update command.Is there a way to execute an update using the list of addresses in anexcel spreadsheet or some other form of list? This kind of scriptingis new territory for me.
I want to replicate between 2 servers not on the same network. One has to be addressed by IP. Currently replication does not support IPs - anyone have a workaround. Will this be resolved in the future? Seems this is a pretty common scenario if your db is on a hosted site.
I hope someone can help me with this problem. I need to replicate some tables from our store servers to our corporate server. All of them are 6.5, and the corporate server will subscribe and the stores will publish. I have registered all of our stores on the corporate server so that I can enable them for replication.
The problem is that to be able to register them I had to create a system DSN for ODBC, but that would only work if I used the IP addresses. Unfortunately, then when I try to enable them on the corporate server I get an error stating that name (which is the IP address) is not a valid object identifier.
In ODBC I did actually use a real name (not an IP) for the name, a normal description, and the IP is in the Server field. Is there some way to use an alias? What am I doing wrong?
Below is a raw data with SQL script to create the temp table. This table is a scale down version of what I am working with. I am taking the addresses from several different sources and putting them in a temp table. Now, I need to remove the duplicate addresses for each ID. Duplicate addresses are okay for different IDs.
Raw Data IDAddr1 CityStateZip 26205 N Main STChicagoIL52147 26205 N Main STChicagoIL52147 2685 Park AveChicagoIL52147 3535 Main StAustinTX78715 35976 Ponco StDallasTX79757 359587 MopacAustinTX78715 4558741 Len LnDaytonFL74717 455518 Spring DrDaytonFL74717 45585 Park AveChicagoIL52147
Desired Result IDAddr1 CityStateZip 26205 N Main STChicagoIL52147 2685 Park AveChicagoIL52147 3535 Main StAustinTX78715 35976 Ponco StDallasTX79757 359587 MopacAustinTX78715 4558741 Len LnDaytonFL74717 455518 Spring DrDaytonFL74717 45585 Park AveChicagoIL52147
We will be moving our two cluster running SQL Server 2005 64-bit SP2 on Windows 2003 to the different datacenter. IP addressed of both nodes will be changed by DNS names remain the same. I was wondering if anyone had issues with this. Out thought is that we just need to update IPs in Cluster Manager.
I have a report with a Matrix table. When it€™s fully populated I have 5 rows. These rows are different categories in a CRM system. In these categories there are a lot of Opportunities listed. The thing here is that category 1-4 exist in one table, really a view, and category 5 exist in another different view. So to gather all the information into one single Matrix table to later have subtotals and stuff I just made a little Union of the two select queries.
Now one the column in the table is of course Topic. And from here my client wants to be linked to the right CRM card. The problem I have encountered is that how can I have to different addresses on one single cell in the table?
In the Navigation pane in the cell that corresponds to the Topic, for now I have an address like this: =string.Format("http://{0}/SFA/opps/edit.aspx?id={1}", Parameters!srv.Value, Fields!objectid.Value)
What I need to change when it€™s a category 5 Opportunity is €œopps€? to €œcat5€?and add €œ&etc=10008€? to the end of the address. Any ideas?
PS. {0} and {1} are parameters, one server parameter and one opportunity ID parameter.
I want to setup a method to get emailed whenever someone adds an item to a particular table.
I'm looking at SP's, and DTS's.. but i'm just not sure what the best path is.
http://www.sqldev.net/dts/SMTPTask.htm will create a great Custom DTS Email Task.. but then i don't know what to do next... I don't know how to say.. "If a new row is added, then run this DTS"... or if i should schedule the DTS to run every 30 minutes and then somehow query for new "Created" dates.
I'm trying to implement DTS and FTP. So that when a company sends or FTP infomation to our server, it runs a script and checks to see if the infomation is correct and sends and email saying successful or unsuccessful.
Hi,I wish to use email functionality of sql to send me an email when an insertis performed on a particular table. I know that a proc and may be a triggeris required.Can someone please provide me some hints.Thanks,Guju
I read with great interest a post on getting hte top 75 per cent by month, but still get through this problem. I have a table containing addresses, city names and state names, Each row has a unique address. I want to get the first ten addresses for each city in each state. I've tried something like the following which didn't work. Suggestions on how to solve the (simple) problem would be appreciated. Select top (10) city,state,address from address_list alan
When I initially installed SQL Server 2005 Express, it automatically picked up all the IP addresses (60 of them) I had on the server, and filled them in under TCP/IP - IP adresses Tab.
I recently took those IPs off the server and replaced them with 30 new IP addresses. Is there a way to have SQL Server 2005 Express read the Network configuration on the server and take the old IPs off the TCP/IP - IP addresses tab and put the new one's there?
A client of mine has an update to the software they use which requires SQL ports to be pinholed on the router to allow direct connctions from point of sale terminals. I'm not happy with the idea but thats not my call. Is there a way to restrict IP addresses that can connect to SQL Express ? (without havng to get them to buy a new router)
I have a report that gets sends out through a subscription and sometimes the report has multiple pages and all those pages appear within one email.Is it possible to set the subscription in such a way that an email is sent per page when the subscription executes.
Under IIS SMTP I can set bounced email redirect etc. how to do that with dbmail, the idea is I can get the list of bounced emails somewhere so I can create a report.
I have below code which send email from SQL Table "testing$" with use of store procedure but I am not getting any email, please check where is the error and if I run below code as query then it give me expected result but mail not received,
hi in my aspx page, user enters multiple email ids separated by comma. i want to store all this email ids in one table under the field "PresenterEmail".
