Select Statement To Show Last Amt And Date
Jan 5, 2004
I'm trying to write a select statement that will show me the total payments, last payment date, and last payment amount for each client. I get results but it is all payments. Can anyone help me with this?
Thank you,
Here is what I have tried:
SELECT dbo.tblClients.Client_ID, Sum(dbo.tblPaymentReceipts.[Amount Paid]) AS SumOfAmtPaid, MAX(dbo.tblPaymentReceipts.[Date]) AS LastPaymentDate, dbo.tblPaymentReceipts.[Amount Paid] INTO #temp_UNPaymentsA
FROM dbo.tblPayments INNER JOIN dbo.tblPaymentReceipts ON dbo.tblPayment.Pay_ID = dbo.tblPaymentReceipts.Pay_ID
WHERE (dbo.tblPaymentReceipts.[Date] BETWEEN '1/1/2001' AND '12/31/2003')
GROUP BY dbo.tblPayments.Pay_ID, dbo.tblPaymentReceipts.[Amount Paid]
Select * FROM #temp_UNPaymentsA
GROUP BY Client_ID, SumOfAmtPaid, LastPaymentDate, [Amount Paid]
HAVING SUM(SumOfAmtPaid) BETWEEN 0 AND 1000
View 3 Replies
ADVERTISEMENT
Feb 19, 2004
i am not getting a result back when i run the query below.
select * from users where DateCreated = '2004-02-19'
so i went into the table and looked at the record. for DateCreated field i have both date and time. ex: 2004-02-19 08:40:00
how can i select this record with out using the time in the select statement. what i want to see is how many users signed up for a day. any ideas?
View 5 Replies
View Related
Jun 25, 2004
I am trying to create a SELECT statement that would allow my users to type in a date parameter like 6/25/04. My SELECT statement would then pull all entries for that date. The problem I am running into is that it seems SQL wants the date to be parameterized as between 6/25/04 and 6/25/04 11:59:30 PM. Is there any way around that? Again I would like my users to simply enter 6/25/04 and have all entries pulled. Thanks for any help.
View 1 Replies
View Related
Oct 26, 2005
In the following simple select statement:
SELECT Selskabsnummer, Plademærkenummer, [Fra dato], isnull([Til dato], getdate()) as [Til dato], Bemærkning
FROM Gramex_DW.dbo.Plademærkelinie WITH (NOLOCK)
WHERE convert(int, Plademærkenummer) = 1
ORDER BY isnull([Til dato], getdate()) ASC
I'm looking for a way to replace the [Fra dato] field with '1900-01-01' if the date earlier than this date. E.g. instances of 1800-01-01 exist.
I'm not looking for an update to the table, but merely a way to manipulate the output, as the front-end I'm developing can't handle pre 1900-01-01 date formats, and I would prefer formatting the data before it reaches he front-end as it would be easier to handle.
/Trin
View 6 Replies
View Related
Oct 7, 2007
Hello Guys,
Please could you help me formulate a SELECT statement to output a date in the format (Month, Date Year), eg
October, 07 2007. Thanks.
View 5 Replies
View Related
May 7, 2008
select ID,MODIFIED_DT from sample WHERE convert(varchar,MODIFIED_DT,111) like '%2008/04/28%'
My output is
id modifieddate
8 2008-04-28 08:24:10.000
4 2008-04-28 08:25:53.000
7 2008-04-28 08:28:33.000
8 2008-04-28 08:42:25.000
now my query is like this
select ID,MODIFIED_DT from sample WHERE ID = 8 OR ID = 7 or = 6 or ID = 5 or ID = 4 and convert(varchar,MODIFIED_DT,111) like '%2008/04/28%'
my output is like this
id modifieddate
8 2008-04-28 08:24:10.000
4 2008-04-28 08:25:53.000
7 2008-04-28 08:28:33.000
8 2008-04-28 08:42:25.000
5 2008-04-29 09:41:01.000
5 2008-04-29 16:34:52.000
7 2008-04-29 16:47:20.000
8 2008-04-30 10:11:02.000
Why do the values with date 2008-04-29 and 30 are coming .
View 3 Replies
View Related
Dec 1, 2006
when i use this command in a aspx file
"SELECT DISTINCT Format$([dbo.classgiven.classdate], 'mm/yyyy') AS monthyear,{..............................
'Format$' is not a recognized function name.
so how do i change date from mm/dd/yyyy to mm/yyyy
View 2 Replies
View Related
Jan 17, 2007
I need to convert a date like 08/1/2009 to 0809
I also need to show currency as 100.00 and not 100.0000
How can I do these in a select statement?
SELECT CONVERT(Varchar(20),ExpirationDate,10) AS ExpirationDate, Amount FROM tblPayment
I appreciate any help!
View 5 Replies
View Related
Apr 6, 2015
Select '"' + CAST( GETDATE() as varchar(100) ) + '"' as Obs_dt_1
I get this output---> "Apr 6 2015 4:07PM"
But what I really need is for it to show in this format---> "2015-04-06 16:08:05.317" .... How do I do the select ?
View 3 Replies
View Related
Oct 9, 2007
Hello Everyone,
I have a line of VB / SQL Server code as follows:
Dim Command As New SqlClient.SqlCommand("SELECT * FROM CUSTOMER_MEET WHERE (MT_WEEK = CURRENT WEEK OF THE YEAR) AND (MT_DATE = TODAY'S DATE)", conn).
My problem here is how to code today's date in a format like this - October, 09 2007. The MT_DATE column on the database table has Varchar datatype - Varchar(21).
Your help highly appreciated. Thanks.
View 9 Replies
View Related
Aug 25, 2007
Hello! I have a field "End" in my database that is mapped as DateTime and allows nulls. Now I want to do a SQL-Select (in a SqlDataSource) like SELECT * FROM My_Table Where (([End] = @EndDate) OR ([End] = null)) @EndDate is a valid DateTime, but the second OR condition doesn't work. What is the best way to check if the [End]-field is empty or null? Thank you very much!
View 1 Replies
View Related
Jun 29, 2006
I have a db that has duplicate customer records.
If I run the following select statment against the appropriate table it returns the duplilcate records in the result set. However, from this list I want to add an additional select statement embedded into the query that will actually return only those records with the most current syscreated date.
Example of script I'm using---
select cmp_fadd1, syscreated, cmp_name, cmp_code
from cicmpy
where cmp_fadd1 in (select cmp_fadd1
from cicmpy
group by cmp_fadd1
having count(1) = 2)
order by cmp_fadd1,syscreated desc
The results is:
Address Syscreated date Customer
1622 ONTARIO AVENUE 2005-06-15 22:19:45.000 RELIABLE PARTSLTD
1622 ONTARIO AVENUE 2004-01-22 18:10:05.000 RELIABLE PARTS LTD
PEI CENTER 2006-01-05 22:03:50.000 P.G. ENERGY
PEI CENTER 2004-01-22 17:57:56.000 P.G. ENERGY
From this I want to be able to select ONLY those records with the most current syscreated date or those records with 2005-06-15 and 2006-01-05
Can anyone help me with creating this?
Thanks
Cyndie
View 4 Replies
View Related
Jun 3, 2015
Here's my statement below. What I'm trying to get is joining the name column in master.sys.databases with a sub query for the database name, file location and backup start date from the MSDB database. The reason for this, if a new database has never been backed up, It should be returning as a NULL value, which is my goal. However, I'm getting multiple results for the backups.
select CONVERT(CHAR(100), SERVERPROPERTY('Servername')) AS Server,a.name,File_Location=b.physical_device_name,backup_start_date=max(backup_start_date)
from master.sys.databases a
left join(select c.database_name,backup_start_date=max(backup_start_date),b.physical_device_name
from msdb.dbo.backupmediafamily b join msdb.dbo.backupset c on c.media_set_id=c.backup_set_id
where c.type='D'
[Code] .....
View 8 Replies
View Related
Jul 6, 2015
A date field in a report returns the date value as:
2015-07-01 13:30:27.000
Is there any way I can script this to appear as:
01 July 2015 (or 01-07-2015 or 01/07/2015)Â - basically to cut out the hours, minutes and seconds?
The best I have managed is: CONVERT (varchar(17),DATE,113) AS Date1 but this still leaves me with:
01 July 2015 13:30
View 9 Replies
View Related
Feb 20, 2008
i want to display records as per if else condition in ms sql query,for this i have used tables ,queries as follows
as per data in MS Sql
my tables are as follows
1)material
fields are -- material_id,project_type,project_id,qty, --
2)AB_Corporate_project
fields are-- ab_crp_id,custname,contract_no,field_no
3)Other_project
fields are -- other_proj_id,other_custname,po
for ex :
vales in table's are
AB_Corporate_project
=====================
ab_crp_id custname contract_no field_no
1 abc 234 66
2 xyz 33 20
Other_project
============
other_proj_id other_custname po
1 xxcx 111
2 dsd 222
material
=========
material_id project_type project_id qty
1 AB Corporate 1 3
2 Other Project 2 7
i have taken AB Corporate for AB_Corporate_project ,Other Project for Other_project
sample query i write :--
select m.material_id ,m.project_type,m.project_id,m.qty,ab.ab_crp_id,
ab.custname ,op.other_proj_id,op.other_custname,op. po
case if m.project_type = 'AB Corporate' then
select * from AB_Corporate_project where ab.ab_crp_id = m.project_id
else if m.project_type = 'Other Project' then
select * from Other_project where op.other_proj_id=m.project_id
end
from material m,AB_Corporate_project ab,Other_project op
but this query not work,also it gives errors
i want sql query to show data as follows
material_id project_type project_id custname other_custname qty
1 AB Corporate 1 abc -- 3
2 Other Project 2 -- dsd 7
so plz help me how can i write sql query for to show the output
plz send a sql query
View 8 Replies
View Related
Sep 3, 2007
Hello... im having a problem with my query optimization....
I have a query that looks like this:
SELECT * FROM table1
WHERE location_id IN (SELECT location_id from location_table WHERE account_id = 998)
it produces my desired data but it takes 3 minutes to run the query... is there any way to make this faster?... thank you so much...
View 3 Replies
View Related
Sep 21, 2006
HiI am using SQL 2005, VB 2005I am trying to insert a record using parameters using the following code as per MotLey suggestion and it works finestring insertSQL; insertSQL = "INSERT INTO Issue(ProjectID, TypeofEntryID, PriorityID ,Title, Area) VALUES (@ProjectID, @TypeofEntryID, @PriorityID ,@Title, @Area)"; cmdInsert SqlCommand; cmdInsert=new SqlCommand(insertSQL,conn); cmdInsert.Parameters.Add("@ProjectID",SqlDbType.Varchar).Value=ProjectID.Text; My query is how to detail with dates my previous code wasinsertSQL += "convert(datetime,'" + DateTime.Now.ToString("dd/MM/yy") + "',3), '";I tried the code below but the record doesn't save?string date = DateTime.Now.ToString("dd/MM/yy"); insertSQL = "INSERT INTO WorkFlow(IssueID, TaskID, TaskDone, Date ,StaffID) VALUES (@IDIssue, @IDTask, @TaskDone, convert(DateTime,@Date,3),@IDStaff)"; cmdInsert.Parameters.Add("IDIssue", SqlDbType.Int).Value = IDIssue.ToString();cmdInsert.Parameters.Add("IDTask",SqlDbType.Int).Value = IDTask.Text;cmdInsert.Parameters.Add("TaskDone",SqlDbType.VarChar).Value = TaskDoneTxtbox.Text;cmdInsert.Parameters.Add("Date",SqlDbType.DateTime).Value = date;cmdInsert.Parameters.Add("IDStaff",SqlDbType.Int).Value = IDStaff.Text;Could someone point to me in the right direction?Thanks in advance
View 3 Replies
View Related
Jun 8, 2005
in my relational sql db structure I have some items and its children, grandchildren itemsto print these values do i need to build one sql statement for each tier?into my sproc i tried something as following but it returns me only the last tierSELECT * FROM AINNER JOINB ON A.field1 = B.field2INNER JOINC ON A.filed3 = C.field4WHERE A.filed1 = @myParam
thanks a lot
View 1 Replies
View Related
Dec 20, 2007
I'm going to create a graph using SSRS. there is a date field. I want to show only the date , not with the time. How do I do this?
Also Can I use two different data sets in a single graph?
Thanks
View 3 Replies
View Related
Dec 27, 2006
I have a report that shows patient information, such as patient number, name, and admit date. It also has a date parameter. I enter in the date and it shows all the patients admitted that day. I would like to show the last date the patient was admitted before the date I ran the report for.
For example, if I run the report for 12/20/06, I want to see the patients that were admitted that day and their info like name, and patient number. I would also like to see the last date they were admitted.
View 1 Replies
View Related
Nov 7, 2007
How would you create a column which displays the difference of two other columns in SQL? For example, column C=column A – column B.
My idea is that when ever data enters column A and column B, column C should show the difference of the two automatically. A, B and C are datetime columns. I'm looking at setting up an 'after' trigger on the table. Is there a better approach? Thanks.
View 3 Replies
View Related
Aug 29, 2007
I have a report that pulls data for the following date parameters:
DECLARE @STARTDATE datetime, @ENDDATE datetime
SET @STARTDATE = GETDATE()-3
SET @ENDDATE = GETDATE()
Select * from tablename where reportdate between @STARTDATE and @ENDDATE
This query works fine. I wanted to show the parameters chosen in a text box in the report so the user knows the date range the report was run. I tried using the following:
"Discharge Date between " & Parameters!STARTDATE.Value & " and " & Parameters!ENDDATE.Value
but I am getting a forward dependancy error. I have also tried setting a default value but can not get the correct code to subtract three days from Now()
Can someone help me with this one?
View 5 Replies
View Related
Aug 2, 2007
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:NWHCConnectionString %>"
SelectCommand="SELECT [Title], [URL], [Date] FROM [Article] ORDER BY [Date] DESC"></asp:SqlDataSource>
<asp:Repeater id="myRepeaterUL" runat="server" DataSourceID="SqlDataSource1">
<HeaderTemplate>
<ul>
</HeaderTemplate>
<ItemTemplate>
<li><a href="<%# DataBinder.Eval(Container.DataItem, "URL") %>"><%#DataBinder.Eval(Container.DataItem, "Title")%></a><br /><%# Eval("Date") %></li>
</ItemTemplate>
<FooterTemplate>
</ul>
</FooterTemplate>
</asp:Repeater>
This is my code above, I am trying to order them to show the four new list of news. Here is a picture, yeah its old and everybody loves pictures. see the box on the right, i want to show only four, not all of it.
View 2 Replies
View Related
Feb 21, 2014
With this qry i need to only show in the result for ordate the date and not the time stamp. below is my qry and the first line of the results:
SELECT DISTINCT
adHock.dbo.PPVVINCE$.Corps, adHock.dbo.PPVVINCE$.House, adHock.dbo.PPVVINCE$.Cust,
IDST_EVENT_ORDERS.ORDATE,
IDST_EVENT_ORDERS.ORTIME,
IDST_EVENT_ORDERS.EVWMIN,
IDST_EVENT_ORDERS.EVTDES,
[Code] ....
result for the field trying to change
ORDATE
1/1/2014 12:00:00 AM
I Only want to see the date.
View 6 Replies
View Related
Aug 28, 2015
I've a table which contains a record for each day an employee is employed:In the cube I've create a measure which is a sum of the field "Employed" which provides me the number of employees that are employed for a given date (lowest level of my time dimensions which are YEAR-MONTH-DATE)The problem is that the number aggregating on YEAR and MONTH which provides me with wrong figures at these levels - So how can create a calculated measure (maybe with Scope) that only show the Ultimo Numbers at the lowest level when I am browsing on the Month or Year level. For example if I am on the Year level I only want it to sum on the date 31-12-xxxx and if I'm at the month level(for example July 2012) it should show me the sum of 31-07-2012 which are the last level for the given month.
View 4 Replies
View Related
Aug 29, 2006
I am currently having this problem with gridview and detailview. When I drag either onto the page and set my select statement to pick from one table and then update that data through the gridview (lets say), the update works perfectly. My problem is that the table I am pulling data from is mainly foreign keys. So in order to hide the number values of the foreign keys, I select the string value columns from the tables that contain the primary keys. I then use INNER JOIN in my SELECT so that I only get the data that pertains to the user I am looking to list and edit. I run the "test query" and everything I need shows up as I want it. I then go back to the gridview and change the fields which are foreign keys to templates. When I edit the templates I bind the field that contains the string value of the given foreign key to the template. This works great, because now the user will see string representation instead of the ID numbers that coinside with the string value. So I run my webpage and everything show up as I want it to, all the data is correct and I get no errors. I then click edit (as I have checked the "enable editing" box) and the gridview changes to edit mode. I make my changes and then select "update." When the page refreshes, and the gridview returns, the data is not updated and the original data is shown. I am sorry for so much typing, but I want to be as clear as possible with what I am doing. The only thing I can see being the issue is that when I setup my SELECT and FROM to contain fields from multiple tables, the UPDATE then does not work. When I remove all of my JOIN's and go back to foreign keys and one table the update works again. Below is what I have for my SQL statements:------------------------------------------------------------------------------------------------------------------------------------- SELECT:SELECT People.FirstName, People.LastName, People.FullName, People.PropertyID, People.InviteTypeID, People.RSVP, People.Wheelchair, Property.[House/Day Hab], InviteType.InviteTypeName FROM (InviteType INNER JOIN (Property INNER JOIN People ON Property.PropertyID = People.PropertyID) ON InviteType.InviteTypeID = People.InviteTypeID) WHERE (People.PersonID = ?)UPDATE:UPDATE [People] SET [FirstName] = ?, [LastName] = ?, [FullName] = ?, [PropertyID] = ?, [InviteTypeID] = ?, [RSVP] = ?, [Wheelchair] = ? WHERE [PersonID] = ? ---------------------------------------------------------------------------------------------------------------------------------------The only fields I want to update are in [People]. My WHERE is based on a control that I use to select a person from a drop down list. If I run the test query for the update while setting up my data source the query will update the record in the database. It is when I try to make the update from the gridview that the data is not changed. If anything is not clear please let me know and I will clarify as much as I can. This is my first project using ASP and working with databases so I am completely learning as I go. I took some database courses in college but I have never interacted with them with a web based front end. Any help will be greatly appreciated.Thank you in advance for any time, help, and/or advice you can give.Brian
View 5 Replies
View Related
Jan 9, 2015
Ok I have a query "SELECT ColumnNames FROM tbl1" let's say the values returned are "age,sex,race".
Now I want to be able to create an "update" statement like "UPATE tbl2 SET Col2 = age + sex + race" dynamically and execute this UPDATE statement. So, if the next select statement returns "age, sex, race, gender" then the script should create "UPDATE tbl2 SET Col2 = age + sex + race + gender" and execute it.
View 4 Replies
View Related
Jun 18, 2015
I simply need to list the most recent value for each employee here... the value at each person's maximum date
Sample Detail Data:
EmpID                 Date                    Value
1Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 1/1/14Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 27
1Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 2/12/15Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 333
2Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 5/5/15Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 255
3Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 5/4/15Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 110Â Â
3Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 1/1/13Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 67Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â
3Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 3/2/14Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 80
[Code] ....
What is the most efficient way to display the most recent value for each employee ID via MS SQL.?
View 4 Replies
View Related
Jul 20, 2005
hiI need to write a stored procedure that takes input parameters,andaccording to these parameters the retrieved fields in a selectstatement are chosen.what i need to know is how to make the fields of the select statementconditional,taking in consideration that it is more than one fieldaddedfor exampleSQLStmt="select"if param1 thenSQLStmt=SQLStmt+ field1end ifif param2 thenSQLStmt=SQLStmt+ field2end if
View 2 Replies
View Related
Oct 29, 2007
Hi guys,
I have the query below (running okay):
Code Block
SELECT DISTINCT Field01 AS 'Field01', Field02 AS 'Field02'
FROM myTables
WHERE Conditions are true
ORDER BY Field01
The results are just as I need:
Field01 Field02
------------- ----------------------
192473 8461760
192474 22810
Because other reasons. I need to modify that query to:
Code Block
SELECT DISTINCT Field01 AS 'Field01', Field02 AS 'Field02'
INTO AuxiliaryTable
FROM myTables
WHERE Conditions are true
ORDER BY Field01
SELECT DISTINCT [Field02] FROM AuxTable
The the results are:
Field02
----------------------
22810
8461760
And what I need is (without showing any other field):
Field02
----------------------
8461760
22810
Is there any good suggestion?
Thanks in advance for any help,
Aldo.
View 3 Replies
View Related
Dec 13, 2006
I have a report that has 2 dropdowns, selecting from the first dropdown populates the second one. This works fine in the BI Studio.
When I deploy this report to the 'Report Manager' and make a selection from the first dropdown, the second dropdown loads (as expected). I tried to select from the second dropdown (which has only 1 item - which is correct), the dropdown does not appear correctly - as in, I can't see that item.
Since we can't attach anything here, below is the link to a screenshot of my issue:
http://docs.google.com/View?docid=ddd6j2xn_52c5qd5
If you look closely at the screenshot from the link above, you'll see that there is a value in the second dropdown - it just won't show completely - as if the dropdown is not rendering correctly. I can view source on the page and see that the dropdown has a value.
What appears to be happening is the if only 1 item is in the second dropdown and that item is longer than the size of the dropdown, the dropdown won't render.
Here is my value for the second dropdown '012 Candy Gadler David Thapero'. This is the only value in the second dropdown. - You can try 35 chars or more in the dropdown to confirm.
Notes:
+ No special chars are in either dropdown
+ I am using IE 7 (Also had someone test this on IE 6 - same problem)
+ Using Visual Studio 2005 to build report - where this works fine
Work around:
+ If I add another item to the dropdown via a UNION query, I see the original value + the new item in the dropdown #2
Please share your thoughts
Thanks,
h.
View 9 Replies
View Related
Jul 29, 2015
My goal is to select values from the same date range for a month on month view to compare values month over month. I've tried using the date trunc function but I'm not sure what the best way to attack this is. My thoughts are I need to somehow select first day of every month + interval 'x days' (but I don't know the syntax).In other words, I want to see
Select
Jan 1- 23rd
feb 1-23rd
march 1-23rd
april 1-23rd
,value
from
table
View 9 Replies
View Related
Jul 4, 2006
Hello friends,
I want to use select statement in a CASE inside procedure.
can I do it? of yes then how can i do it ?
following part of the procedure clears my requirement.
SELECT E.EmployeeID,
CASE E.EmployeeType
WHEN 1 THEN
select * from Tbl1
WHEN 2 THEN
select * from Tbl2
WHEN 3 THEN
select * from Tbl3
END
FROM EMPLOYEE E
can any one help me in this?
please give me a sample query.
Thanks and Regards,
Kiran Suthar
View 7 Replies
View Related