Hello... im having a problem with my query optimization....
I have a query that looks like this:
SELECT * FROM table1
WHERE location_id IN (SELECT location_id from location_table WHERE account_id = 998)
it produces my desired data but it takes 3 minutes to run the query... is there any way to make this faster?... thank you so much...
I am currently having this problem with gridview and detailview. When I drag either onto the page and set my select statement to pick from one table and then update that data through the gridview (lets say), the update works perfectly. My problem is that the table I am pulling data from is mainly foreign keys. So in order to hide the number values of the foreign keys, I select the string value columns from the tables that contain the primary keys. I then use INNER JOIN in my SELECT so that I only get the data that pertains to the user I am looking to list and edit. I run the "test query" and everything I need shows up as I want it. I then go back to the gridview and change the fields which are foreign keys to templates. When I edit the templates I bind the field that contains the string value of the given foreign key to the template. This works great, because now the user will see string representation instead of the ID numbers that coinside with the string value. So I run my webpage and everything show up as I want it to, all the data is correct and I get no errors. I then click edit (as I have checked the "enable editing" box) and the gridview changes to edit mode. I make my changes and then select "update." When the page refreshes, and the gridview returns, the data is not updated and the original data is shown. I am sorry for so much typing, but I want to be as clear as possible with what I am doing. The only thing I can see being the issue is that when I setup my SELECT and FROM to contain fields from multiple tables, the UPDATE then does not work. When I remove all of my JOIN's and go back to foreign keys and one table the update works again. Below is what I have for my SQL statements:------------------------------------------------------------------------------------------------------------------------------------- SELECT:SELECT People.FirstName, People.LastName, People.FullName, People.PropertyID, People.InviteTypeID, People.RSVP, People.Wheelchair, Property.[House/Day Hab], InviteType.InviteTypeName FROM (InviteType INNER JOIN (Property INNER JOIN People ON Property.PropertyID = People.PropertyID) ON InviteType.InviteTypeID = People.InviteTypeID) WHERE (People.PersonID = ?)UPDATE:UPDATE [People] SET [FirstName] = ?, [LastName] = ?, [FullName] = ?, [PropertyID] = ?, [InviteTypeID] = ?, [RSVP] = ?, [Wheelchair] = ? WHERE [PersonID] = ? ---------------------------------------------------------------------------------------------------------------------------------------The only fields I want to update are in [People]. My WHERE is based on a control that I use to select a person from a drop down list. If I run the test query for the update while setting up my data source the query will update the record in the database. It is when I try to make the update from the gridview that the data is not changed. If anything is not clear please let me know and I will clarify as much as I can. This is my first project using ASP and working with databases so I am completely learning as I go. I took some database courses in college but I have never interacted with them with a web based front end. Any help will be greatly appreciated.Thank you in advance for any time, help, and/or advice you can give.Brian
View 5 Replies View Relatedhello,I have the following query. it returns result in less than 1 second.select *from employee e, address awhere e.id=a.emp_idand e.id=1234The problem is that it becomes extremely slow if i take the last lineout. So the query looks like:select *from employee e, address awhere e.id=a.emp_idThe above query is only supposed to return ~500 rows. but i stillhaven't got the result back after 30 minutes.Does anyone have any suggestions about troubleshooting this problem?Thank you in advance!Eddy
View 5 Replies View RelatedThe following stored procedure is run whenever someone searches my database. When I first created the site, this search took less than 3 seconds. Now, there is more data in the system and the search is taking over 30 seconds.
I am not very good with SQL and I'm sure I am doing some dumb things. Is there a better way to write this query to speed things up?
Thanks a lot,
Chris MessineoSET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
-- =============================================
-- Author:Chris Messineo
-- Create date: 4/27/2007
-- Description:Get Search
-- =============================================
ALTER PROCEDURE [dbo].[Search]
@Keyword as varchar(40)=NULL
AS
BEGIN
SELECT
Script.Title,
Script.ScriptID,
Script.Logline,
Member.Name
FROM
Script
Join Contest on (Script.ContestID=Contest.ContestID)
Join ScriptComment on (Script.ScriptID=ScriptComment.ScriptID)
Join Member on (Script.MemberID=Member.MemberID)
WHERE
(Title like '%' + COALESCE(@Keyword, Title) + '%' or
Logline like '%' + COALESCE(@Keyword, Logline) + '%' or
Comments like '%' + COALESCE(@Keyword, Comments) + '%')
GROUP BY
Script.Title,
Script.ScriptID,
Script.Logline,
Member.Name
ORDER BY
Title
END
Hi,
I have a table called notes, with thousands of rows of "notes" entered by customer services agents. Each row has an account number, date and username columns.
An account can have many notes on thetable.
How can I select the last two notes on the table left for each account? Trying to use select top 2, but of course it's only giving me the top 2 notes for ALL accounts.
Please help.
Thanks very much.
In my select statement, I return a column for 'datediff' using a CASEquery. I call this column 'Elapsed_days'is there anyway I can use this result later on in the same select? IEI want to refer to 'elasped days' in another CASE query rather thanhave to re-write something which incorporates the original one.Simpler the better - I'm new!Make any sense?Hope so
View 1 Replies View RelatedOk I have a query "SELECT ColumnNames FROM tbl1" let's say the values returned are "age,sex,race".
Now I want to be able to create an "update" statement like "UPATE tbl2 SET Col2 = age + sex + race" dynamically and execute this UPDATE statement. So, if the next select statement returns "age, sex, race, gender" then the script should create "UPDATE tbl2 SET Col2 = age + sex + race + gender" and execute it.
hiI need to write a stored procedure that takes input parameters,andaccording to these parameters the retrieved fields in a selectstatement are chosen.what i need to know is how to make the fields of the select statementconditional,taking in consideration that it is more than one fieldaddedfor exampleSQLStmt="select"if param1 thenSQLStmt=SQLStmt+ field1end ifif param2 thenSQLStmt=SQLStmt+ field2end if
View 2 Replies View RelatedHi guys,
I have the query below (running okay):
Code Block
SELECT DISTINCT Field01 AS 'Field01', Field02 AS 'Field02'
FROM myTables
WHERE Conditions are true
ORDER BY Field01
The results are just as I need:
Field01 Field02
------------- ----------------------
192473 8461760
192474 22810
Because other reasons. I need to modify that query to:
Code Block
SELECT DISTINCT Field01 AS 'Field01', Field02 AS 'Field02'
INTO AuxiliaryTable
FROM myTables
WHERE Conditions are true
ORDER BY Field01
SELECT DISTINCT [Field02] FROM AuxTable
The the results are:
Field02
----------------------
22810
8461760
And what I need is (without showing any other field):
Field02
----------------------
8461760
22810
Is there any good suggestion?
Thanks in advance for any help,
Aldo.
I'd like to make a logic statement, that would take as arguments result of the sql select query. In more details: I would like to create a local Bool variable that would be false if some value is NULL in the table (or select query).Query example:select taskID from Users where Login=@usernameWhich classes/methods should i use to solve this problem? I use SqlDataSource to get access to database and i think i should use something like SqlDataSource.UpdateCommand and SqlDataSource.UpdateParameters but dont know how to build from this a logic statement.Thanks in advance
View 8 Replies View RelatedI need to pull one field from one table and one field from another table that is i need to pull 'eGroupName' field from 'Exception' Table and 'eGroup Description' field from 'eGroup' Table but there is no connection between these two tables means there is no forign key relationship between these two tables but i need to pull both fields . If i use INNER JOIN i need to mention relationship between both tables right? so how to write query for this , and one more thing is i need to add an extra column as "Location"which is not there in either of tables for that i need to use CASE Statement as if DataSource = 1 then "ABC" else "BCD" . pls help me out in writing SQL Statement???
is this correct ?? its showing me errors
Select Exception.eGroupName, eGroup.eGroupDescription from Exception Inner Join eGroup ON ???
(case when 'DataSource =1' then 'ABC' then 'BCD' endcase)
Where .....
Pls correct me
Thanks
Hello friends , I have table (MoneyTrans) with following structure
[Id] [bigint] NOT NULL,
[TransDate] [smalldatetime] NOT NULL,
[TransName] [varchar](30) NOT NULL, -- CAN have values 'Deposit' / 'WithDraw'
[Amount] [money] NOT NULL
I need to write a query to generate following output
Trans Date, total deposits, total withdrawls, closing balance
i.e. Trans Date, sum(amount) for TransName='Deposit' and Date=TransDate , sum(amount) for TransName=Withdraw and Date=TransDate , Closing balance (Sum of deposit - sum of withdraw for date < = TransDate )
I am working on this for past two days with out getting a right solution. Any help is appreciated
Sara
How do I Query two tables and minus the result to be displayed in a gridview. I will appreciate all the help that I can get in this regard. Find below my two select statement
1st Select StatementDim SelectString As String = "SELECT DISTINCT [Course_Code], [Course_Description], [Credit_Hr], [Course_Type], [Course_Method] FROM [MSISCourses] WHERE (([Course_Type] = Core) OR ([Course_Type] = Information Integration Project) "If radBtnView.Checked = True ThenSelectString = SelectString & " OR ([Course_Type] = 'Knowledge')"End IfIf chkGView.Checked = True ThenSelectString = SelectString & " OR ([Specialization] = 'Data Management')"End IfIf chkGView2.Checked = True ThenSelectString = SelectString & " OR ([Specialization] = 'General')"End IfIf chkGView1.Checked = True ThenSelectString = SelectString & " OR ([Specialization] = 'Electronic Commerce')"End IfIf chkGView3.Checked = True ThenSelectString = SelectString & " OR ([Specialization] = 'Network Administration and Security')"End IfIf chkGView4.Checked = True ThenSelectString = SelectString & " OR ([Specialization] = 'Healthcare Information Systems')"End IfSqlDataSource3.SelectCommand = SelectString
2nd Select Statement"SELECT DISTINCT [Co_Code], [Co_Description], [Cr_Hr], [Co_Type], [Co_Method] FROM [StudentCourses] WHERE ([Co_Code] = StdIDLabel)"
my gridview<asp:GridView ID="GridView2" runat="server" AutoGenerateColumns="False" DataKeyNames="Course_Code" DataSourceID="SqlDataSource3" GridLines="Horizontal"><Columns><asp:BoundField DataField="Course_Code" HeaderText="Course_Code" ReadOnly="True" SortExpression="Course_Code" /> <asp:BoundField DataField="Course_Description" HeaderText="Course_Description" SortExpression="Course_Description" /> <asp:BoundField DataField="Credit_Hr" HeaderText="Credit_Hr" SortExpression="Credit_Hr" /> <asp:BoundField DataField="Course_Type" HeaderText="Course_Type" SortExpression="Course_Type" /> <asp:BoundField DataField="Course_Method" HeaderText="Course_Method" SortExpression="Course_Method" /> </Columns></asp:GridView>
An ADODB error spawn everytime I query more than 15 fields in a specific SQL Table. My sql statement is something like this:
set rs=server.createobject("ADODB.Recordset")
rs.open "select * from mytbl",application("mycon"),1,3
And the error is something like this:
"you can't query more than the maximum field "
Hi folks,
Hope you are all well.
I am using a CASE statement within a SELECT query to sum up values for different customers.
SELECT CR_CUST.Customer_Code,
'General_01' = CASE WHEN CR_PROD.Part_Class_Code = '01' THEN SUM(CR_INVOICE.Line_Value) ELSE 0 END,
'General_07' = CASE WHEN CR_PROD.Part_Class_Code = '07' THEN SUM(CR_INVOICE.Line_Value) ELSE 0 END,
'General_08' = CASE WHEN CR_PROD.Part_Class_Code = '08' THEN SUM(CR_INVOICE.Line_Value) ELSE 0 END
FROM CR_CUST
INNER JOIN CR_INVOICE ON CR_CUST.Customer_Code = CR_INVOICE.Customer_Code
INNER JOIN CR_PROD ON CR_INVOICE.Product_Code = CR_PROD.Product_Code
WHERE (CR_PROD.Part_Class_Code = 1 OR
CR_PROD.Part_Class_Code = 7 OR
CR_PROD.Part_Class_Code = 8)
GROUP BY CR_CUST.Customer_Code,
CR_PROD.Part_Class_Code
The above query produces the following results...
Customer_Code General_01 General_07 General_08
------------- ---------------- ---------------- ----------------
02210 10074.30 .00 .00
02347 7606.49 .00 .00
02210 .00 12618.42 .00
02347 .00 13131.63 .00
02210 .00 .00 4505.44
02347 .00 .00 5018.03
My question is this - is it possible to expand my SQL Query into a Sub Query so that each customers data appears on the same line of the results?, like so...
Customer_Code General_01 General_07 General_08
------------- ---------------- ---------------- ----------------
02210 10074.30 12618.42 4505.44
02347 7606.49 13131.63 5018.03
I can achieve this by writing my results into a temporary table and extracting the data with the following SQL Query, but I just thought it would be really cool if I could do it in one SQL Statement without using a temporary table.
SELECT Customer_Code,
SUM(General_01),
SUM(General_07),
SUM(General_08)
FROM #MyTempTable
GROUP BY Customer_Code
Thanks in advance,
Kev
I am trying to apply the logic from the following resource: URL....but cannot get it to work with my logic for some reason.For example, the following query:
;WITH CTE1 AS (SELECT CONVERT(VARCHAR, GETDATE(), 120) AS Col1),
CTE2 AS (SELECT CONVERT(VARCHAR, GETDATE(), 111) AS Col2)
SELECT CTE1.Col1,CTE2.Col2
FROM CTE1
CROSS JOIN CTE2
GO
Produces the following output:
Col1 | Col2
2014-05-08 10:55:54 | 2014/05/08
But, as soon as I try to do something else like:
;WITH CTE1 AS (SELECT COUNT(login) FROM userinfo AS Col1),
CTE2 AS (SELECT COUNT(login) FROM userinfo AS Col2)
SELECT CTE1.Col1,CTE2.Col2
FROM CTE1
CROSS JOIN CTE2
GO
I receive the following errors:
Msg 8155, Level 16, State 2, Line 1
No column name was specified for column 1 of 'CTE1'.
Msg 8155, Level 16, State 2, Line 2
No column name was specified for column 1 of 'CTE2'.
Are there limitations when trying to use multiple CTE in a single query?
hi my self avii want to copy data from one table to other table,by giving certaincondition and i want o use insert statement .in this i want to pass somevalue directly and some value from select statement , if i try i ll geterror i.e all column of destination table (i.e in which i want to insertdata) should match with all columns in values column some thing likethis.plz give me some helpful suggetion on this
View 1 Replies View Relatedhi myself avii am developing one appliacaion in which i am using vb 6 as front end,adodb as database library and sql sever 7 as backend.i want to update one table for which i required data from other table. andiretrive data from second table by giving some condition. when i get data,then to update first table i need to use do while loop. instead of that iwant to use select statement directly in update query.plz give me some help.following is the my queries and its out putStrSql = ""StrSql = "Select * From SalesVchMaterialDesc where TransactionID=" &txtTransactionID.text & ""rsMName.Open StrSql, Conn, adOpenKeysetDo While Not rsMName.EOFStrSql = ""StrSql = "Update StockTable Set Outward=Outward - " &rsMName("Netweight") & ",OutwardQty=OutwardQty - " & rsMName("Qty") & "Where MaterialId=" & rsMName("Material_Name") & " and VoucherDate='" &Format(rsMName("VoucherDate"), "mm/dd/yyyy") & "'RsAdd.Open StrSql, Conn, adOpenStaticrsMName.MoveNextLooprsMName.Closeout put***main querySelect * From SalesVchMaterialDesc where TransactionID=848do while not loopUpdate StockTable Set Outward=Outward - 8.06,OutwardQty=OutwardQty - 1Where MaterialId=221 and VoucherDate='04/01/2004' and SMID=0loop
View 1 Replies View RelatedHow come SQL Server doesn't like the following?
CREATE PROCEDURE sp_myproc
(@myvar int)
AS
CASE @myvar
WHEN 1
EXEC sp1
WHEN 2
EXEC sp2
WHEN 3
EXEC sp3
DEFAULT
EXEC sp3
END
How can I code something like this legally in T-SQL?
Thanks
Jason
Hello friends,
I want to use select statement in a CASE inside procedure.
can I do it? of yes then how can i do it ?
following part of the procedure clears my requirement.
SELECT E.EmployeeID,
CASE E.EmployeeType
WHEN 1 THEN
select * from Tbl1
WHEN 2 THEN
select * from Tbl2
WHEN 3 THEN
select * from Tbl3
END
FROM EMPLOYEE E
can any one help me in this?
please give me a sample query.
Thanks and Regards,
Kiran Suthar
I am attempting to run update statements within a SELECT CASE statement.
Select case x.field
WHEN 'XXX' THEN
UPDATE TABLE1
SET TABLE1.FIELD2 = 1
ELSE
UPDATE TABLE2
SET TABLE2.FIELD1 = 2
END
FROM OuterTable x
I get incorrect syntax near the keyword 'update'.
I have the following query:
(SELECT MIN(CFGDates.AccountPdEnd)
FROM CFGDates LEFT JOIN
AR ON AR.Period = CFGDates.Period
WHERE AR.Period = '200408')
I need to convert this into a case statement.
I tried various ways but did not get the result that I was after
Thanks,
Laura
I need to insert data into a table based on the results returned by a select statement. Basically, the select statement below gives me a list of all the work orders created in the last hour.
select worknumber from worksorderhdr where date_created > DATEADD(HOUR, -1, GETDATE())
This might return anywhere between 5 and 50 records each time. What I then need to do is use each of the work numbers returned to create a record in the spec_checklist_remind table. The other details in the insert statement will be the same for each insert, it's just the worknumber from the select statement that needs to be added to the insert where the ?? are below:
INSERT INTO spec_checklist_remind (form, record_type, linked_to_worknumber, spec_checklist_id) values (5, 0, '??',52)"
I am wondering if there is a direct query in this case:
I am developing a program to a company which simply sells services
One service may have different prices for different types of clients
The price of any service for any client can change at any time, and I should be able to trace these changes at any time
I made the following tables (simplified): (asterisk for primary key)
(Table) (Fields)
CLIENT_TYPES : ID*, ClientTypeName
SERVICES : ID*, ServiceName
PRICES : ServiceID*, ClientTypeID*, Price, Date*
ORDERS : ID*, Date, ClientTypeID
ORDER_SERVICES : OrderID*, ServiceID*
The field in bold is the area of the question
This is a sample data in the PRICES table:
ServiceID ClientTypeID Price Date1 1 100 1/1/20072 1 150 1/1/20071 2 90 1/1/20072 2 135 1/1/2007
Now if I want to update a price of service 1 for clienttype 1, I add the following row:
1 1 100 1/1/2008
So one product for one client can have any number of prices with different dates
The following query:
SELECT * FROM PRICES WHERE ClientTypeID = 1
will retrieve all prices with repeats for a specific client (#1 here)
What I want is a query to retrieve the most recent prices for specific client for all products, even if a query on query
If there is commemts on table design please tell me
thanks for any one who provides help
I have noticed something strange on the select statement that you can use on query notification.
I have a table that contains a compute column let's call it "Calculate".
If I subscribe to query notification:
Select ID from table
the subscription fails.
The column Calculate doesn't use the column ID.
Why??
for me it shouldn't be the case
Thankx
MArina B.
Hi,
I have a field called "Starting DateTime" and I want to convert into my local time. I can convert it in the report with the expression "=System.TimeZone.CurrentTimeZone.ToLocalTime(Fields!Starting_DateTime.Value)", but that is too late. I want to convert it in the Select statement of the query.
Can anyone help me please?
Thx
In the below code i want to use select statement for getting customer
address1,customeraddress2,customerphone,customercity,customerstate,customercountry,customerfirstname,customerlastname
from customer table.Rest of the things will be as it is in the following code.How do i do this?
INSERT INTO EMImportListing ("
sql += " CustId,Title,Description,JobCity,JobState,JobPostalCode,JobCountry,URL,Requirements, "
sql += " IsDraft,IsFeatured,IsApproved,"
sql += " Email,OrgName,customerAddress1,customerAddress2,customerCity,customerState,customerPostalCode,
[code]....
I have 3 tables, with this relation:
tblChats.WebsiteID = tblWebsite.ID
tblWebsite.AccountID = tblAccount.ID
I need to delete rows within tblChats where tblChats.StartTime - GETDATE() < 180 and where they are apart of @AccountID. I have this select statement that works fine, but I am having trouble converting it to a delete statement:
SELECT * FROM tblChats c
LEFT JOIN tblWebsites sites ON sites.ID = c.WebsiteID
LEFT JOIN tblAccounts accounts on accounts.ID = sites.AccountID
WHERE accounts.ID = 16 AND GETDATE() - c.StartTime > 180
Hey guys i have a stock table and a stock type table and what i would like to do is say for every different piece of stock find out how many are available The two tables are like thisstockIDconsumableIDstockAvailableconsumableIDconsumableName So i want to,Select every consumableName in my table and then group all the stock by the consumable ID with some form of total where stockavailable = 1I should then end up with a table like thisEpson T001 - Available 6Epson T002 - Available 0Epson T003 - Available 4If anyone can help me i would be very appreciative. If you want excact table names etc then i can put that here but for now i thought i would ask how you would do it and then give it a go myself.ThanksMatt
View 2 Replies View RelatedSELECT Top 10 Name, Contact AS DCC, DateAdded AS DateTimeFROM NameTaORDER BY DateAdded DESC
I'm trying to right a sql statement for a gridview, I want to see the last ten records added to the to the database. As you know each day someone could add one or two records, how can I write it show the last 10 records entered.
I have created a stored procedure with dynamic query and using sp_executesql . stored procedure is work fine.
Now i want to call stored procedure in select statement because stored procedure return a single value.
I search on google and i find openrowset but this generate a meta data error
So how i can resolve it ???
Hello
How can i say this I would like my if statement to say: if what the client types in Form1.Cust is = to the Select Statement which should be running off form1.Cust then show the Cust otherwise INVALID CUSTOMER NUMBER .here is my if statement.
<% If Request.Form("Form1.Cust") = Request.QueryString("RsCustNo") Then%> <%=Request.Params("Cust") %> <% Else %> <p>INVALID CUSTOMER NUMBER</p> <% End If%>
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:RsCustNo %>"
ProviderName="<%$ ConnectionStrings:RsCustNo.ProviderName %>" SelectCommand="SELECT [CU_CUST_NUM] FROM [CUSTOMER] WHERE ([CU_CUST_NUM] = ?)">
<SelectParameters>
<asp:FormParameter FormField="Cust" Name="CU_CUST_NUM" Type="String" />
</SelectParameters>
</asp:SqlDataSource>any help would be appreciated
Hi,
I am a newbie to this site and hope someone can help....
I have a select statement which I would like to create an extra column and put an if statement in it.... Current syntax is:
if(TL_flag= '1', "yes") as [Trial Leave]
it is coming up with an error.... I can use Select case but I should not need to as this should work?
Any ideas?