Select With Multiple Conditions

May 12, 2008

Select c.Plan, c.ClaimNumber
from tbFLags c inner join tbMembers m
On c.Claim = m.HistoryNum
where c.Plan = 'J318' and c.Paymon = c.Rmon and c.Rmon = '2008-03-01'


Now I want to add these into this statement, what should be done.



Members meeting any of the 3 sets of criteria should not be selected

1) tbFlags.Hosp='1'

2) tbFlags.RD='1' OR tbCMSFlags.RAType in ('D', 'I2')

3) Deceased = tbMembers.DOD is not null.

View 27 Replies


ADVERTISEMENT

T-SQL (SS2K8) :: Select Query With Multiple Where Conditions And OR Operator

Feb 6, 2015

I have the got below T SQL query to fetch the matching record

DECLARE @MappingTable TABLE
(
Productname nvarchar(10),
identification_key1 int,
identification_key2 int,
identification_key3 int

[Code] .....

-- result - 'Orange'

This is an exact matching record and straight forward

Is it possible to identify the record using T SQL query based on the following scenarios

1) return the record - If all the three where conditions match
2) if record not found check and return the record where 2 columns values in the where condition match

-- Expected Result for below query: 'Orange', because 2 of the columns in where condition have matching values

SELECT Productname
FROM @MappingTable where identification_key1=1 or identification_key2 =2 or identification_key3 =1

-- result - 'Orange'

View 4 Replies View Related

Select Rows Based On Multiple Date Conditions

Jun 5, 2008

Hi,
I have 1 table with 5 rows. One of the rows has dateTime values. I want to know how many rows there are with a value in that column < today AND how many rows there are with a value in that column > today.
I'm not sure how to do this.

SELECT Count(*) WHERE dateColumn <= today AND dateColumn > today gives me everything.
I like to end up with a column containing the count of rows <= today
and a column with rows where date > today.

Is this possible in SQL or do I have to retrieve all rows and then loop over the resultset and check each row?

Thanks,
Marc

View 2 Replies View Related

JOIN Efficiency Using Multiple ON Conditions Versus WHERE Conditions

Jan 10, 2008

My question is fairly simple. When I join between two tables, I always use the ON syntax. For example:


SELECT

*
FROM

Users

JOIN UserRoles

ON (Users.UserRoleId = UserRoles.UserRoleId)


No problems there. However, if I then decide to further filter the selection based on some trait of the UserRole, I have two options: I can add the condition as a WHERE statement, or I can add the condition within the ON block.

--Version 1:

SELECT

*
FROM

Users

JOIN UserRoles

ON (Users.UserRoleId = UserRoles.UserRoleId)
WHERE

UserRoles.Active = 'TRUE'


-- Version 2

SELECT

*
FROM

Users

JOIN UserRoles

ON (Users.UserRoleId = UserRoles.UserRoleId

AND UserRoles.Active = 'TRUE')


So, the question is, which is faster/better, if either? The Query Analyzer shows the two queries have the exact same execution plan, which makes sense, since they're both joining the same tables. However, I'm wondering if adding the condition in the ON statement results in fewer rows the JOIN statement initially needs to join up, thus reducing the overall initial size of the results table before the WHERE conditions are applied.

So is there a difference, performance wise? I imagine that if Users had a thousand records, and UserRoles had 10 records, then the JOIN would create a cartesian product of the two tables, resulting in 10,000 records in the table before the WHERE conditions are applied. However, if only three of the UserRoles is set to Active, would that mean that the resulting table, before applying WHERE conditions, would only contain 3000 records?

Thanks for whatever information you can provide.

View 7 Replies View Related

T-SQL (SS2K8) :: Selecting Data From Table With Multiple Conditions On Multiple Columns

Apr 15, 2014

I am facing a problem in writing the stored procedure for multiple search criteria.

I am trying to write the query in the Procedure as follows

Select * from Car
where Price=@Price1 or Price=@price2 or Price=@price=3
and
where Manufacture=@Manufacture1 or Manufacture=@Manufacture2 or Manufacture=@Manufacture3
and
where Model=@Model1 or Model=@Model2 or Model=@Model3
and
where City=@City1 or City=@City2 or City=@City3

I am Not sure of the query but am trying to get the list of cars that are to be filtered based on the user input.

View 4 Replies View Related

Multiple AND Conditions

Sep 12, 2006

Hi All.

Is there a way to have multiple AND conditions on the same field in a database.

EXAMPLE

SELECT * FROM tbl
WHERE field1 = 1 AND field1 = 2 AND field1 = 5

Thanks

View 9 Replies View Related

Multiple Conditions In IF Statement In T-SQL?

Jul 20, 2005

Hi All,Just wondering if anyone can tell me if you can test for multipleconditions as part of an "IF" statement in T-SQL in SQL Server 2000?ie something like:IF @merr = 1 or @merr=2BeginSELECT statementUPDATE statementEndAny help much appreciated!Much warmth,M.

View 1 Replies View Related

Multiple Conditions In A Query

Feb 2, 2008



Hi,


I've a table with a field named 'TypeOfProd' that has an ID for the various types of products: ex.:
1 - product A
2 - product B
3- product C
4 - product D
....
10 - product J
and so on

I need to create a stored procedure that querys only the product types selected by the user.

The user can select 1, 3, 5, 10 or 1, 3 or 3 or 0 for all or some other combination.

For the first user selection a have something like this
SELECT Prod FROM tableProd WHERE TypeOfProd = 1 OR TypeOfProd = 3 or TypeOfProd = 5 OR TypeOfProd = 10
For the second,
SELECT Prod FROM tableProd WHERE TypeOfProd = 1 OR TypeOfProd = 3

Is it possible to have a stored procedures that runs a query with this random scenario?

please help

Thanks

JPP

View 8 Replies View Related

Analysis :: Use IIF For Multiple Conditions - MDX

Jun 2, 2015

I am have a dimension to use as a slicer, I am trying to associate that dimension with a measure group using a calculated measure. I am using the below query:

With member [THD Inventory Balance] as 
IIF(
[THD Conversion Units].[Conversion Units].CURRENTMEMBER = [THD Conversion Units].[Conversion Units].&[EA], [Measures].[thdpos - Inventory Balance EA], 0)
IIF(
[THD Conversion Units].[Conversion Units].CURRENTMEMBER = [THD Conversion Units].[Conversion Units].&[LF],

[Code] ....

But it fails with the error: The syntax for 'IIF' is not correct.

View 6 Replies View Related

Multiple OR LIKE Conditions In Sproc

Nov 12, 2007

I have a ListBox controls that contains about 5 items. A stored procedure is executed based on selections of other controls ont he screen, but I cann't figure out how to properly get the dynamically selected conditions passed to the sproc from C#.

If a user selects 3 of the five items, the sproc needs to build something like this:

WHERE Region LIKE Item1 OR Region LIKE Item2 OR Region LIKE Item3

I cannot figure out how to do this. It works properly if I just make the ListBox SelectionMode as Single and pass that one selected item's value.

Any help is greatly appreciated.

Thanks,
Chris

View 3 Replies View Related

Generating Data Using Multiple Conditions

Nov 22, 2007

Hi,

I am attempting to explain my probelm again. Please read it:

I have 3 tables. CallDetail, Call and Request. The tables are populated in the following order: One row for CallDetail, One for Call and one for Request and so on.

I have to generate a UniqueNo - Per empid, Per StateNo, Per CityNo, Per CallType. The no will remain same for the same CallDetailID and ordered by the date created. However if the CallDetailId changes, the no. will increment based on the empid, Per StateNo, Per CityNo, Per CallType

For eg:

For Eg: ( Assume Call Detail id is changing for all the days)
Monday - 3 calls made for empid 1, state SA023, city 12 and call type 1 will generate a unique id 1 for all 3 calls
Tuesday - 2 calls made for empid 1, state SA023, city 12 and call type 1 will generate a unique id 2 for both calls
Wednesday - 3 calls made for emp id 1, state SA023, city 12 and call type 2 will generate a unique id 1 for 3 calls as the call type is different than the previous day for same employee
Thursday - 2 calls made for empid 2, state SA023, city 13 and call type 1 will generate unique id 1 for both the calls as combi of city and call type are different.

So the unique id has to be generated considering empid, state, city and call type, ordered by the EntryDt. EntryDt is needed because :
3 calls made for empid 1, state SA023, city 12 and call type 1 at 10/11/2007 10.00 AM will generate a unique id 1 for all 3 calls
2 calls made for empid 1, state SA023, city 12 and call type 1 at 10/11/2007 12.00 AM will generate a unique id 2 as the call was registered later.


Here is what I wrote with the help of a mod over here:




Code Block
DECLARE @Request TABLE(RequestID INT, CustomerName VARCHAR(30),
StateNo NVARCHAR(5), CityNo INT, CallID INT, UniqueNo INT)

INSERT @Request
SELECT '324234', 'Jack', 'SA023', 12, 111, Null UNION ALL
SELECT '223452', 'Tom', 'SA023', 12, 112, Null UNION ALL
SELECT '456456', 'Bobby', 'SA023', 12, 114, Null UNION ALL
SELECT '22322362', 'Guck', 'SA023', 12, 123, Null UNION ALL
SELECT '22654392', 'Luck', 'SA023', 12, 134, Null UNION ALL
SELECT '225652', 'Jim', 'SA023', 12, 143, Null UNION ALL
SELECT '126756', 'Jasm', 'SA023', 12, 145, Null UNION ALL
SELECT '786234', 'Chuck', 'SA023', 12, 154, Null UNION ALL
SELECT '66234', 'Mutuk', 'SA023', 12, 185, Null UNION ALL
SELECT '2232362', 'Buck', 'SA023', 12, 195, Null

DECLARE @Call TABLE(CallID INT, CallType INT, CallDetailID INT)
INSERT @Call
SELECT 111, 1, 12123 UNION ALL
SELECT 112, 1, 12123 UNION ALL
SELECT 114, 1, 12123 UNION ALL
SELECT 123, 2, 12123 UNION ALL
SELECT 134, 2, 12123 UNION ALL
SELECT 143, 1, 6532 UNION ALL
SELECT 145, 1, 6532 UNION ALL
SELECT 154, 1, 6532 UNION ALL
SELECT 185, 2, 6532 UNION ALL
SELECT 195, 3, 6532

DECLARE @CallDetail TABLE(CallDetailID INT, EmpID INT, EntryDt DateTime)
INSERT @CallDetail
SELECT 12123, 1, '11/5/2007 10:41:34 AM' UNION ALL
SELECT 6532, 1, '12/5/2007 12:12:34 PM'

-- Query written with help of a helpful person here
UPDATE r
SET r.UniqueNo = dt.CallGroup
FROM @Request r
JOIN @Call c
ON r.CallID = c.CallID
JOIN (SELECT
CallDetailID,
EntryDt,EmpID,
CallGroup = ROW_NUMBER() OVER (ORDER BY EntryDt )
FROM @CallDetail
) dt
ON c.CallDetailID = dt.CallDetailID
select * from @Request

OUTPUT IS
324234 Jack SA023 12 111 1
223452 Tom SA023 12 112 1
456456 Bobby SA023 12 114 1
22322362 Guck SA023 12 123 1
22654392 Luck SA023 12 134 1
225652 Jim SA023 12 143 2
126756 Jasm SA023 12 145 2
786234 Chuck SA023 12 154 2
66234 Mutuk SA023 12 185 2
2232362 Buck SA023 12 195 2

Where as it should be

324234 Jack SA023 12 111 1
223452 Tom SA023 12 112 1
456456 Bobby SA023 12 114 1
22322362 Guck SA023 12 123 1
22654392 Luck SA023 12 134 1
225652 Jim SA023 12 143 2
126756 Jasm SA023 12 145 2
786234 Chuck SA023 12 154 2
66234 Mutuk SA023 12 185 2
2232362 Buck SA023 12 195 1



as the call for Buck is of calltype 3 which was not done earlier. So the no starts from 1.

Also how to add the paritioning by empid, StateNo, Per CityNo, Per CallType and yet maintain the same unique no for the same calldetailid.
Eg: CallGroup = ROW_NUMBER() OVER (PARTITION BY empid, state, city, calltype ORDER BY EntryDt )

thanks for any help.

View 4 Replies View Related

Joining Multiple Tables With Conditions?

Mar 19, 2008



Hi,
I have a tbl called BANK.

This shows a banking history of transactions and includes a field called TransType and a field called PaymentID.


I also have two other tables called Suppliers and SubContractors.

For each record in the bank, I need to match up a record in either the suppliers or subcontractors tbl based on the PaymentID value. I know if the record relates to either a Supplier or Subcontractor based on the value of the TransType field which will be either SUPPLIER or SUBCONTRACTOR or Null (in which case a match doesn't matter)


I have a working query based on joining just the Supplier tbl.. but how do I do the join to the other tbl aswell?


So overall, for each record in the bank, if the transtype is SUPPLIER I need to look in the supplier tbl for a match for that paymentID, and if the transtype is SUBCONTRACTOR, I need to do the same but in SUBCONTRACTOR tbl.

How would I best write that?

thanks for any help!

View 5 Replies View Related

Multiple Conditions In An UPDATE Clause

Dec 12, 2007

I have a table (GLTRANS) with thousands of lines.
1 column in the table (ACCNO) has 300 different values which all need to change to a new value.

ie. 11100 all change to 8100
11200 all change to 8200

I know how to do a simple UPDATE
UPDATE GLTRANS
SET ACCNO = '8100'
WHERE ACCNO = '11100'

But how can i combine into 1 script rather than having to continually change this script 300 times??


Thanks
Wilbur

View 6 Replies View Related

How Do I Insert Into Multiple Tables Bases On Conditions?

Jan 6, 2004

I have a record that I want to insert into (2) tables. The first thing I want to do is see if a record already exists in the table for the user, if it does - I just want to skip over the insert.

next I want to do the same thing in the SW_REQUEST table. If there is a record in there for the member, I want to just skip the insert.

My code works as long as there isn't an existing record in the tables. Can someone give me a hand?


Here's what I have (and it doesn't work)


CREATE PROCEDURE b4b_sw_request

@FName as varchar(50)= NULL,
@LName as varchar(50)=NULL,
@Address1 as varchar(100) = NULL,
@Address2 as varchar(100) = NULL,
@City as varchar(50) = NULL,
@State as char(2) = NULL,
@Zip as char(5) = NULL,
@Email as varchar(100) = NULL,
@Send_Updates as smallint = '0'

AS

IF EXISTS
(SELECT FName, LName, Address1, Zip from MEMBERS WHERE FName = @FName AND LName = @LName AND Zip = @Zip)
BEGIN
RETURN
END

ELSE
BEGIN
INSERT INTO MEMBERS
(FName, LName, Address1, Address2, City, State, Zip, Email)
Values
(@FName, @LName, @Address1, @Address2, @City, @State, @Zip, @Email)
END

IF EXISTS
(SELECT MEMBER_ID FROM SW_REQUESTS WHERE MEMBER_ID = @@Identity)
BEGIN
RETURN
END

ELSE
BEGIN
INSERT INTO SW_REQUESTS
(MEMBER_ID, Send_Updates)
Values
(@@Identity, @Send_Updates)
END
GO

View 2 Replies View Related

Transact SQL :: Query For Multiple Optional Conditions?

Jun 1, 2015

I have following query. Now I want to change this in such a way that if Condition 1 satisfies then it should not go to next condition ,if not then should go to next. Similarly the same format till condition 4.

select * from table where
IND = 'Y'
and
(
(STATE = @STATE and LOB =@LOB and COMPANY=@COMPANY)--Condition 1
OR
(STATE = @STATE and LOB =@LOB)--Condition 2
OR
(STATE = @STATE and COMPANY=@COMPANY)--Condition 3
OR
(STATE = @STATE)--Condition 4
)

View 4 Replies View Related

Reporting Services :: Multiple Conditions In IIF Statement?

Jul 8, 2015

I have a table with the following fields and data:

Offense, Year, Month, Count, Amount
F 2007 January 11 $49,238.00
F 2007 February 12 $24,000.00
F 2007 March 31 $55,184.00
F 2007 April 19 $64,647.00
F 2007 May 33 $100,010.00
F 2007 June 16 $59,678.00
F 2007 July 22 $39,700.00
F 2007 August 3 $9,000.00
F 2007 September 4 $75,000.00
F 2007 October 8 $19,250.00
F 2007 November 50 $106,153.00
F 2007 December 26 $80,000.00

I have data for years 2007-2014. I am designing an SSRS report, and want to use IIF statement to return data. Using the following:

=IIF(Fields!Year.Value="2007" AND Fields!Month.Value="February", "return value of count field", "n/a")

The above does not work, it doesn't return the value of Count field, it does return the n/a.

View 14 Replies View Related

Using IF ElSE Like Conditions In An Select Statement

Mar 17, 2006

Hi All,
This is my problem. I need the out put of a sql select statement to be "true" or "false" depending on the actual columns value is positive or negative. Does any one how to do this.
Thanks in advance,
-VJ

View 1 Replies View Related

Select Max Value From Prior Where Conditions

Apr 7, 2006

I can't figure this out for the life of me. Wanted to know if it's possible to select certain date conditions in a query, then later reference those conditions and to only select the max of them.

I need to do this dynamically as I do not know what the max value is. I've provided an example below:

Select var1
From table1
where
(
(Date1 = '11/30/2005')
OR
(Date1 = '12/31/2005')
)
and Date1 = (Max of previously selected values e.g. '12/31/2005')

What I can't figure out is how to dynamically retrieve the max of 11/31/2005 and 12/31/2005. Any ideas are greatly appreciated.

View 1 Replies View Related

Trigger To Set Status Code Using Multiple Conditions (EXISTS)

Sep 6, 2007

My goal is to create a trigger to automatically set the value for a status id on a table based on set criteria. Depending on the values of other fields will determine the value that the status id field is assigned. So far, I have written the trigger to update the status id field and I go through a seperate Update statement for each status id value. The problem is that I can't get this to work at the record level. The problem that I am getting is that if I have 50 records in TABLE1 and at least one of them satisfies the where clause of the update statement, all of the records get updated. So, using these two update statements, all of my records end up with a status value of '24' because that was the last update statement run in the trigger. Here is the code I have so far:


CREATE TRIGGER dbo.JulieTrigger1

ON dbo.Table1

AFTER INSERT,UPDATE

AS

BEGIN

BEGIN TRY

/*Update Table1.Status to POTENTIAL (id 23) status */

UPDATE TABLE1

SET status_id = 23

WHERE EXISTS (SELECT *

FROM TABLE1 a INNER JOIN TABLE2 b

ON b.order_id = a.order_id

WHERE a.start_dt IS NULL

AND b.current_status_ind = 1

AND b.lead_status_id NOT IN (15,16)

AND a.order_id = TABLE1.order_id)




/*Update Table1.Status to ACTIVE (id 24) status */

UPDATE TABLE1

SET status_id = 24

WHERE EXISTS (SELECT *

FROM TABLE1 a

WHERE fill_ind = 1

AND (end_dt IS NULL OR end_dt > getdate() )

AND a.job_order_id = TABLE1.job_order_id)





END TRY

BEGIN CATCH

DECLARE @ErrorMessage NVARCHAR(4000);

DECLARE @ErrorSeverity INT;

DECLARE @ErrorState INT;

SELECT

@ErrorMessage = ERROR_MESSAGE(),

@ErrorSeverity = ERROR_SEVERITY(),

@ErrorState = ERROR_STATE()

IF @@TRANCOUNT > 0

ROLLBACK TRAN



-- Return the error to the calling object

RAISERROR (@ErrorMessage, -- Message text.

@ErrorSeverity, -- Severity.

@ErrorState -- State.

)

END CATCH

SET NOCOUNT ON;



END

GO



Thanks in advance for any help!
-Julie

View 1 Replies View Related

1. Select A Field Twice With Different (special) Conditions

Sep 12, 2007

Hi guys,

My challenge is really 3 problems in 1.

I have Table1 and Table2 which are inner joined with an ID.
Each record in Table1 may have up to two corresponding values in Table2, which are Type and Name.

req1- I want to select Table2.Name twice (or more), with each selection conditioned on a specific Type.
req2- I also want all information pertaining to the same ID to be returned in each row
req3- I want all IDs to be returned, even if Table2.Name are empty for Type1 and/or Type2.

So, the source tables look something like this:

Table1.ID | ……
-----------------------
ID001
ID002
ID003
ID004

Table2.ID | Table2.Type | Table2.Name
--------------------------------------------------------
ID001 | Type1 | NameA
ID001 | Type2 | NameB
ID002 | Type1 | NameC
ID003 | Type2 | NameD


Ideally, my results should look like this:

Table1.ID | Table2.Name (Type=1) | Table2.Name (Type=2)
----------------------------------------------------------
ID1 | NameA for Type1 | NameB for Type2
ID2 | NameC for Type1 | (empty)
ID3 | (empty) | NameD for Type2
ID4 | (empty) | (empty)

Right now, I can only get Table2.Name to display once, and it won’t return the empty values, even with outer joins. The structure that I’m using is:

SELECT …
FROM …
WHERE Table2.Name IN
(SELECT Table2.Name
FROM Table1 INNER JOIN Table2 …
WHERE Table2.Name = ‘Type1’)

Sorry the abstractness, but this is the simplest way for me to express the problem.

Any help will be appreciated, thanks!

View 4 Replies View Related

Inserting Conditions In A Select Statement

Jun 12, 2007

How can i insert a if-else condition in a select statement or is there a way to specify a condition within a select statement?
Any reply is really appreciated..thank you..

shemay

View 11 Replies View Related

Transact SQL :: Select Seems To Be Ignoring WHERE Conditions

Apr 23, 2015

SQL Version:  2008 (not r2)
Problem:  My Select statement seems to be unaffected by some of the conditions in the WHERE Clause.  For instance

JCCD.Mth >= cutoffs.FiscalYear_FirstMonth (value '20130101') AND JCCD.Mth <= @WIPMonthCurrent (value '20130101')AND LTRIM(RTRIM(JCCD.Job)) = '71-' (see output and code below)
SQL Code:
declare @WIPMonthCurrent date  = '20130101'
SELECT  
     JCCD.JCCo, JCCD.Job, JCCD.Mth, JCCD.Source, sum(JCCD.ActualCost) AS CostToDate

[code]....

View 5 Replies View Related

Reporting Services :: SSRS - IIF / Switch / Replace Multiple Conditions In A Field

Nov 18, 2015

Have a nvarchar column in ms sql that, based on user input, may or may not have a carriage return and a line break together (CHR(13)&CHR(10)), just a carriage return (CHR(13)), just a line break (CHR(10)). In using that column in ssrs, I need to find if any of the above exist and replace them with the string "x0Dx0A", "x0D", or "x0A" respectively.

I'm getting lost in this expression:

=SWITCH
( (InStr(Fields!Info.Value, CHR(13)&CHR(10) > 0, REPLACE(Fields!Info.Value, CHR(13)&CHR(10)), "x0Dx0A")), (InStr(Fields!Info.Value, CHR(13) > 0, REPLACE(Fields!Info.Value, CHR(13)), "x0D")), (InStr(Fields!Info.Value, CHR(10)
> 0, REPLACE(Fields!Info.Value, CHR(10)), "x0A")) )

Error is:

System.Web.Services.Protocols.SoapException: The Value expression for the textrun ‘Info.Paragraphs[0].TextRuns[0]’ contains an error: [BC30455] Argument not specified for parameter 'Replacement' of 'Public Function Replace(Expression As String, Find As String,

[Code] .....

View 2 Replies View Related

SQL Server 2008 :: Join Another Table But With Select Conditions?

Mar 24, 2015

I have this sql....

Select
DISTINCT p.dbPatID, p.dbpatfirstname, p.dbPatLastName,
s.dbSchTypeCnt as SchDetailType, t.dbSchTypeCnt as SchTypeType,
ISNULL(r.dbStatusDesc, 'No Ref') AS dbStatusDesc,
ISNULL(t.dbSchTypeCode, 'No Ref') AS dbSchTypeCode,
ISNULL(t.dbSchTypeDesc, 'No Ref') AS dbSchTypeDesc,

[code]....

however, I only want the lastest a.dbPatApptTime and only when a.dbPFStatus = 1 and a.ClientRef = 'EPS'

So the stand alone sql could be....

Select Top(1) dbPatApptTime as LastVisitDate, dbSchTypeDesc as LastVisitDesc
from appointments
where dbPFStatus = 1 and clientref = 'EPS'
order by dbPatApptTime desc

I'm just not sure how to incorporate that into my sql or whether there is a better way,

View 9 Replies View Related

Multiple Tables Select Performance - SQL 2005 - Should It Take 90 Seconds For A Select?

Dec 4, 2007

I have a problem where my users complain that a select statement takes too long, at 90 seconds, to read 120 records out of a database.
The select statement reads from 9 tables three of which contain 1000000 records, the others contain between 100 and 250000 records.
I have checked that each column in the joins are indexed - they are (but some of them are clustered indexes, not unclustered).
I have run the SQL Profiler trace from the run of the query through the "Database Engine Tuning Advisor". That just suggested two statistics items which I added (no benefit) and two indexes for tables that are not involved at all in the query (I didn't add these).
I also ran the query through the Query window in SSMS with "Include Actual Execution Plan" enabled. This showed that all the execution time was being taken up by searches of the clustered indexes.
I have tried running the select with just three tables involved, and it completes fast. I added a fourth and it took 7 seconds. However there was no WHERE clause for the fourth table, so I got a cartesian product which might have explained the problem.
So my question is: Is it normal for such a type of read query to take 90 seconds to complete?
Is there anything I could do to speed it up.
Any other thoughts?
Thanks

View 7 Replies View Related

Multiple Select In One Sp

Oct 25, 2007

 I was wondering if it's possible to have a stored procedure that has
two(or more) select statements which you can combine as a single result set.I am not able to use union as my select returns different number of columns.My selects are like this,This example is using only two table but i can have more then 2 tables in situation..ELECT     SUM(col1) AS sumcol1FROM         tbl1WHERE     (ID = @para1') SELECT     SUM(col1) AS sumcol1, SUM(col2) AS sumcol2, SUM(col3)                       AS sumcol3, SUM(col4) AS sumcol1FROM         tbl2WHERE     (id = @para1).thanks  

View 6 Replies View Related

Multiple Select

Dec 15, 2006

Hi,

In my report i have a paremeter which is a dropdown list showing alla available values.Now i want to select multiple values.The parameter is not multi valued.

From the following link:

http://www.ssw.com.au/ssw/Standards/BetterSoftwareSuggestions/ReportingServices.aspx#RichTexbox

Multiple select in Parameters Is fixed in Sqlserver reporting services 2005.

Iam using 2005 version,But i can't able to select multiple values by holding Ctrl key.How to achieve this.If we able to select the multiple values,In wgich format the selected value is passed to the Stored Procedure,It is same the way as selecting multiple values from Multi valued Parameter.

Please help me.

Thanks in advance

View 4 Replies View Related

Select Multiple Tables

Jul 9, 2007

Hi there,I want to select records from 3 tables. In SQL Server 2005, I'm using of "For XML" like this:Select *, (Select * From dbo.PageModules Where (PageId = 1) For Xml Auto) As Modules, (Select * From dbo.PageRoles Where (PageId = 1) For Xml Auto) As Roles From dbo.PagesThat works fine in SQL 2005 but not in SQL 2000, Because SQL 2000 does not support nested "FOR XML".Is there any way for selecting records from multiple tables by a query?Thanks in advance 

View 4 Replies View Related

USING MULTIPLE SELECT STATEMENTS

Apr 23, 2008

how can take codes below and put them into one store procedure to supplie a gridview. also i will like to define the row name on the left like i did to the column on the top using the 'AS'
 Code1....
SELECT
SUM(CASE WHEN Month = 'January' THEN 1 ELSE 0 END) AS January, SUM(CASE WHEN Month = 'February' THEN 1 ELSE 0 END) AS February,
SUM(CASE WHEN Month = 'March' THEN 1 ELSE 0 END) AS March, SUM(CASE WHEN Month = 'April' THEN 1 ELSE 0 END) AS April,
SUM(CASE WHEN Month = 'May' THEN 1 ELSE 0 END) AS May, SUM(CASE WHEN Month = 'June' THEN 1 ELSE 0 END) AS June,
SUM(CASE WHEN Month = 'July' THEN 1 ELSE 0 END) AS July, SUM(CASE WHEN Month = 'August' THEN 1 ELSE 0 END) AS August,
SUM(CASE WHEN Month = 'September' THEN 1 ELSE 0 END) AS September, SUM(CASE WHEN Month = 'October' THEN 1 ELSE 0 END) AS October,
SUM(CASE WHEN Month = 'November' THEN 1 ELSE 0 END) AS November, SUM(CASE WHEN Month = 'December' THEN 1 ELSE 0 END) AS December,
SUM(CASE WHEN site_descr = 'SITE1' THEN 1 ELSE 0 END) AS AllTotal
FROM dbo.V_results
WHERE (site_descr = 'SITE1')
 
Code2.....
 
SELECT
SUM(CASE WHEN Month = 'January' THEN 1 ELSE 0 END) AS January, SUM(CASE WHEN Month = 'February' THEN 1 ELSE 0 END) AS February,
SUM(CASE WHEN Month = 'March' THEN 1 ELSE 0 END) AS March, SUM(CASE WHEN Month = 'April' THEN 1 ELSE 0 END) AS April,
SUM(CASE WHEN Month = 'May' THEN 1 ELSE 0 END) AS May, SUM(CASE WHEN Month = 'June' THEN 1 ELSE 0 END) AS June,
SUM(CASE WHEN Month = 'July' THEN 1 ELSE 0 END) AS July, SUM(CASE WHEN Month = 'August' THEN 1 ELSE 0 END) AS August,
SUM(CASE WHEN Month = 'September' THEN 1 ELSE 0 END) AS September, SUM(CASE WHEN Month = 'October' THEN 1 ELSE 0 END) AS October,
SUM(CASE WHEN Month = 'November' THEN 1 ELSE 0 END) AS November, SUM(CASE WHEN Month = 'December' THEN 1 ELSE 0 END) AS December,
SUM(CASE WHEN site_descr = 'SITE2' THEN 1 ELSE 0 END) AS AllTotal
FROM dbo.V_results
WHERE (site_descr = 'SITE2')
 
 thanks in advance

View 10 Replies View Related

Multiple Datatable Select In C# And Sql?

May 10, 2008

Hello.
I have 2 diffrent tables in the database, is it possible to select both of those back to c# on the same time?
I DONT want to combine the tables, just select them into 2 diffrent datatables in one select statement?
At the moment, i have something like:
function XXOpenDBCon();mCom.Parameters.Clear();mCom.CommandText = "Stuff_GetMovieCategories";myAdap = new SqlDataAdapter();myTable = new DataTable();myAdap.SelectCommand = mCom;myAdap.Fill(myTable);CloseDBCon();return myTable;
Can i ask the database to perhaos retrieve Stuff_GetMovieCategories and on the same time retrieve Stuff_MostViewedMovies?
So the SP does 2 select statements and returns them, i get in the function above 2 datatables with the information, one datatable with Categories and one table with MostViewedMovies.
Is this possible?

View 7 Replies View Related

Multiple Select Statements

Dec 22, 2005

Hi guys and gals,
I am trying to create a select statement that will return an INT that I will later have to use in another select statement. I have the following code, however, I keep getting an error that says:
'Error116: Only one expression can be specified in the select list when the subquery is not introduced with EXISTS.'
My Code is below:
//Start of sql
CREATE PROCEDURE ADMIN_GetSingleUsers( @userID  int) AS
DECLARE @userSQL intSET @userSQL = (SELECT User_ID, TITLE.TITLE AS TITLE,    Cast(Users.Active as  varchar(50)) as Active,   Cast(Users.Approved as  varchar(50)) as Approved,   Users.Unit_ID As usersUnitID,   *    From TITLE, Users   WHERE    User_ID = @userID AND   TITLE.TITLE_ID = Users.Title_ID )
Select Unit_ID, Parent_ID, Unit_Name from UNITS WHERE Unit_ID = @userSQL
//End of sql
Can you point to what I am doing wrong? Thanks in advance!

View 4 Replies View Related

Use Variables Or Multiple SELECT&#39;s?

Jun 6, 2000

Stored procedure retrieves a single row from a single table... Based on the specific values in 4 different columns, different branch actions are taken using 4 nested IF statements.

The question is, what is more efficient: storing column values in 4 variables and then evaluting each of them, or executing the same query 4 times?

Scenario A:

DECLARE @var1 char(20), @var2 char(20), @var3 char(20), @var4 char(20)
SELECT @var1 = col1, @var2 = col2, @var3 = col3, @var4 = col4
FROM theTable
WHERE rid = 12345
IF @var1 = 1
...
ELSE IF @var2 = 2
...
ELSE IF @var3 = 3
... etc.
---------------

Scenario B:

IF (SELECT col1 FROM theTable WHERE rid = 12345) = 1
...
ELSE IF (SELECT col2 FROM theTable WHERE rid = 12345) = 2
...
ELSE IF (SELECT col3 FROM theTable WHERE rid = 12345) = 3
... etc.
--------

Scenario A or B? Please advise...


TIA,
Alex

View 1 Replies View Related

Multiple Table Select

Jun 25, 2004

Hey everyone, I have a question regarding an SQL query. I'm working on a Web App in .NET at the moment and part of the project is to produce a report of all the information about the clients. Now, there are 4 tables in question: Client, Details, Appointments and RefItem. Now, a lot of the information stored in the first 3 tables are IDs and the names corresponding to those IDs are in the RefItem table.

The RefItem table has the columns ItemID, GroupID, Name, HelpText and Active. For example, a row in the Appoinment table might contain the ID 150 under the AppointmentStatusID. In RefItem, the ID 150 corresponds with "Scheduled". So I have


Code:

SELECT Name FROM RefItem WHERE RefItem.ItemID = Appointment.AppointmentStatusID



This works fine for selecting one name, but my report requires pretty much every name. I was told I'd had to use INNER JOIN or LEFT OUTER JOIN but I can't seem to figure it out. If anyone has any info, please let me know!! Thanks

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved