I have to write a master detail query, in which the detail record should
be stored in a variable as Comma Seperated Values. Can anyone help
me......
Sun
*** Sent via Developersdex http://www.developersdex.com ***
Don't just participate in USENET...get rewarded for it!
I am SSRS user, We have a .net UI from where we want to pass multi select values, but these values are comma separated in the database. how can I write a sql query such that when I select multi values on my UI, the comma separated values are take care of.
View 5 Replies View RelatedI have a stored procedure that allows users to select addresses based on partially supplied information from the user. My procedure seems to work fine in all but a few cases. If a user decides to select all the rows for a particular country the procedure below does not return any rows even if the rows exist. I tracked this down to the fact that for Non US countries I set both the StateCode and Country Code to nulls. .
Below is a partial version of my code. Can anyone show me how I can do a "Like" Search even if some of the fields in the row contain null values?
Thanks
1 CREATE PROCEDURE dbo.Addresses_Like( @SendTo VarChar(50) = Null
2 , @AddressLine1 VarChar(50) = Null
3 , @AddressLine2 VarChar(50) = Null
4 , @City VarChar(50) = Null
5 , @StateCode VarChar(2) = Null
6 , @ZipCode VarChar(10) = Null
7 , @CountryCode VarChar(2) = Null)
8
9
10 Declare @SearchSendTo VarChar(50)
11 Declare @SearchAddressLine1 VarChar(50)
12 Declare @SearchAddressLine2 VarChar(50)
13 Declare @SearchCity VarChar(50)
14 Declare @SearchStateCode VarChar(2)
15 Declare @SearchZipCode VarChar(10)
16 Declare @SearchCountryCode VarChar(2)
17
18 If (@SendTo Is Null)
19 Set @SearchSendTo = ""
20 Else
21 Set @SearchSendTo = @SendTo
22
23 If (@AddressLine1 Is Null)
24 Set @SearchAddressLine1 = ""
25 Else
26 Set @SearchAddressLine1 = @AddressLine1
27
28 If (@AddressLine2 Is Null)
29 Set @SearchAddressLine2 = ""
30 Else
31 Set @SearchAddressLine2 = @AddressLine2
32
33 If (@City Is Null)
34 Set @SearchCity = ""
35 Else
36 Set @SearchCity = @City
37
38 If (@StateCode Is Null)
39 Set @SearchStateCode = ""
40 Else
41 Set @SearchStateCode = @StateCode
42
43 If (@ZipCode Is Null)
44 Set @SearchZipCode = ""
45 Else
46 Set @SearchZipCode = @ZipCode
47
48 If (@CountryCode Is Null)
49 Set @SearchCountryCode = ""
50 Else
51 Set @SearchCountryCode = @CountryCode
52
53
54 Select AddressID
55 , SendTo
56 , AddressLine1
57 , AddressLine2
58 , City
59 , StateCode
60 , ZipCode
61 , CountryCode
62 , RowVersion
63 , LastChangedDateTime
64 , OperID
65 From Addresses
66 Where SendTo Like RTrim(LTrim(@SearchSendTo)) + "%"
67 And AddressLine1 Like RTrim(LTrim(@SearchAddressLine1)) + "%"
68 And AddressLine2 Like RTrim(LTrim(@SearchAddressLine2)) + "%"
69 And City Like RTrim(LTrim(@SearchCity)) + "%"
70 And StateCode Like RTrim(LTrim(@SearchStateCode)) + "%"
71 And ZipCode Like RTrim(LTrim(@SearchZipCode)) + "%"
72 And CountryCode Like RTrim(LTrim(@SearchCountryCode)) + "%"
73 Order By CountryCode, City, AddressLine1, AddressLine2, SendTo
SELECT
#followups.suspectid,
#followups.planid,
cond4,
cond5,
cond6,
cond7,
cond8,
tbpdmmembers.firstname tbpdmmembers_firstname,
dbo.GetMemID_PartC_D(#followups.hic,#followups.IsPart_C) tbpdmmembers_MemberID,
--tbpdmmembers.Plan1 tbpdmmembers_MemberID,
tbaddress.address1 tbaddress_address1,
tbaddress.address2 tbaddress_address2,
tbaddress.city tbaddress_city,
tbaddress.state tbaddress_state,
tbaddress.zip tbaddress_zip
from #followups
I want to check if the tbaddress.address1 tbaddress_address1 if it is =null or empty then make it = tbaddress.address2 tbaddress_address2, at the same time I make the tbaddress.address2 tbaddress_address2, null. Otherwise leave it as it is.
Actually, I am working with the report and the tbaddress.address1 carrying the apt number. if there is no aprt # then the line print blanks. so that brings the empty line between the street address and the citystate line.
That is what i am tryig to cover. There could be a way to do this from the crystal report but I am thinking of doing this way cause I can't get the solution to do it from the crystal report.
Select a.uid
, a.name
, mewp.data As Association
from Asset a Join
wshhistory wsh
on a.uid = wsh.assetid
Join worksheet w
on wsh.wshid = w.uid left join
[code]...
When I return the data how do I eliminate the name's that are in bold but keep the association record as this is a relationship between joining tables..
Hi,I have a message system, where people insert their message to the database, and others pick up their messages by selecting messages that have their username as the reciever ID.I have just intoduced bulk message sending - sending to multiple users. This requires many usernames being entered into the recievername column, seperated by a comma.Is there a way to select messages if the column name contains their username, rather than is their username? Because there may be more than one name, I would like everyone that has their name in the column to be able to retrieve the message, even if they arent the only reciever..Please ask if more explanation is needed!Thanks,Jon
View 47 Replies View RelatedI have a sql select query that I'm pulling from a "Years" table to link to 3 columns in an Items table.ZCValuesYear table has two colums: YearID and YearYearID Year1 20042 20053 20064 20075 2008...I want to bind the "Year" value to the three colums in the ZCItem table: ItemUseFirstYearID ItemUseLastYearID ItemYearIDThe query below will pull all the "ID's" for each of the colums, but how would I make it pull the "Year" value (instead of record 4, it would pull 2007 instead)?<asp:SqlDataSource ID="sqlItemSelect" runat="server" ConnectionString="<%$ ConnectionStrings:MyConnString %>" SelectCommand="SELECT ZCPartVault.PartVaultID, ZCPartVault.PartVaultItemID, ZCValuesYear.Year, ZCItem.ItemName, ZCItem.ItemUseFirstYearID, ZCItem.ItemUseLastYearID FROM ZCPartVault FULL OUTER JOIN ZCItem ON ZCPartVault.PartVaultItemID = ZCItem.ItemID FULL OUTER JOIN ZCValuesYear ON ZCItem.ItemUseLastYearID = ZCValuesYear.YearID AND ZCItem.ItemUseFirstYearID = ZCValuesYear.YearID AND ZCItem.ItemYearID = ZCValuesYear.YearID" > </asp:SqlDataSource>
View 2 Replies View RelatedI need to do a SQL query based on the two biggest values of a field. PLS , what s the SQL syntax : select * from Table where PRICE ......Ex: if the values of the field PRICE are : 50, 40, 100, 30 and 150.The request should select the rows that have Price equal 100 or 120Thanks a lot for help
View 2 Replies View RelatedHey all
This is probably the wrong category to post my question in. Apologies if it is.
I have got a Data Flow Task that has an OLE DB Source and a Flat file destination.
Is there a way to do the following:
SELECT id,'31809','C:LCImportDataImages' & id & '.jpg', '1' FROM table1
This obviously doesn't work but I want to insert the id from the table, followed by the value '31809', followed by 'C:LCImportDataImagesid.jpg', followed by '1'
So, the id in 'C:LCImportDataImagesid.jpg' is the same as the id from the table.
I want the file to look like:
1, 31809, C:LCImportDataImages1.jpg, 1
2, 31809, C:LCImportDataImages2.jpg, 1
5, 31809, C:LCImportDataImages5.jpg, 1
etc...
I would really appreciate it if someone could point me to the right direction.
I am trying to work on it..will put up a solution if I find one myself.
Many thanks,
Rupa
I need to do a SQL query based on the two biggest values of a field. PLS , what s the SQL syntax : select * from Table where PRICE ......
Ex: if the values of the field PRICE are : 50, 40, 100, 30 and 150.
The request should select the rows that have Price equal 100 or 120
Thanks a lot for help
I am editing a pre-existing view.This view is already bringing data from 40+ tables so I am to modify itwithout screwing with anything else that is already in there.I need to (left) join it with a new table that lists deposits and thedates they are due. What I need is to print, for each record in theview, the due date for the next deposit due and the total of allpayments that they will have made by the next due date.So this is how things are. I join the table and it obviously bringsmultiple records for each record (one for each matching one in the newtable). I need, instead, to be able to make out what due date I shouldprint (the first one that is GETDATE()?) and the total of deposits upto that date.Now, payments can be either dollar amounts or percentages of anotheramount in the view. So if it's an amount I add it, if it's a % Icalculate the amount and add it.Example:for group X of clients...Deposit 1 due on oct 1: $20Deposit 2 due on oct 15: $30Deposit 3 due on nov 15: $40Deposit 4 due on nov 30: $50for group Y of clients...Deposit 1 due on Oct 30: $200Deposit 2 due on Nov 30: $300Deposit 3 due on Dec 30: $400So when if I execute the view today (Nov 7th) each client from group Xshould have:Next Due Date: nov 15. Total: $90 (deposit 1 + deposit 2 + deposit 3)Group Y should have:Next Due Date: Nov 30, total: $500 (Deposit 1 + deposit 2)And so on.
View 4 Replies View RelatedHi, i have something like this:
SELECT a.boardname, a.description, a.threadcount, a.answercount, a.lastthreadid, b.username, b.subject, b.created FROM forum_board AS a, forum_topics AS b WHERE (a.forumid = @ID) AND (b.id = a.lastthreadid)
The problem here is that lastthreadid does not always have a post linked to it, so sometimes its null. I want it to still return all the boards and then just returnnull values or "" in b.username, b.subject, b.createdThis returns nothing. How can i force it to select these values?
Hi. I have an sql query that i use to insert articles to a sql databse table and for that i use addWithValue to select witch textboxes etc goes where in the database.
Now i need to retrive these values and place them back into some other textboxes (some of them multiline) ,and i wonder if there are any similar ways to retrive values like AddWithparameter so i can easily do textBox.text = //whatever goes here ?
I have a table with one row for each test a user has taken, with columns for userid, score, and test date. I have a query that gets the highest score and the date of the latest test for each user. Easy. But how can I also get the score achieved on the latest test for each agent?
Thanks,
John
(By the way, I've been looking for a good SQL mailing list to ask this question and have been unsuccessful. If there's a better forum than this for this type of question, please let me know).
Hi, I have a question regarding how to insert one column values into a table by selecting from different table..Here is the syntax..
------------
insert into propertytable values (select lastvalue+incrementby from agilesequences where name='SEQPROPERTYTABLE', 13926, 0, 4, 1, 451, 1, 8, 1)
the first column in the propertytable will be... select lastvalue+incrementby from agilesequences where name='SEQPROPERTYTABLE'
How do I do that..Help PLZ..
I am using SSRS 2008 R2 Report Builder 3.0 (10.50.4276.0) . I have simple set of data which has a persons Title and Name e.g. Mr Smith, Miss Jones, Doctor Foster
The report has a parameter where the user can select which records to show based on the matching titles (Mr, Miss, Doctor)
The Query for the report uses Title in (@Title) where @Title is the only parameter which can take multiple values. The report works correctly for any 1 value selected, but as soon as 2 or more values are ticked in the drop down, it fails.
I believe the parameter value is being passed into the query with a comma separating the values e.g. Mr,Miss which causes the IN statement to give an error, as the statement would be where Title IN ('Mr,Miss') which does not match any of the data values.
The parameter value passed needs to be 'Mr','Miss' for the IN statement to work. What statement do I have to put in the report query to get it to select any of the data rows where the title matches any 1 of the selected values?
I have a line chart which works great except when the x axis displays duplicate months. I have tried format codes of MM-YYYY and MMM and have the "numeric or time-scale values" checkbox checked. The data displays fine but the X axis in the case of the MMM format code displays as:
Sep Oct Oct Nov Nov
leaving the user to wonder where exactly does October and November start...
I've googled around but don't see off-hand what I am doing wrong. I am display 3 simultaneous lines if that matters...
Thanks!
Craig
I've got a big problem that I'm trying to figure out:
I have an address table out-of-which I am trying to select mailing addresses for companies UNLESS a mailing address doesn't exist; then I want to select the physical addresses for that company. If I get multiple mailing or physical addresses returned I only want the most recently edited out of those.
I don't need this for an individual ID select, I need it applied to every record from the table.
My address table has some columns that look like:
[AddressID] [int]
[LocationID] [int]
[Type] [nvarchar](10)
[Address] [varchar](50)
[City] [varchar](50)
[State] [char](2)
[Zip] [varchar](5)
[AddDate] [datetime]
[EditDate] [datetime]
AddressID is a primary-key non-null column to the address table and the LocationID is a foreign key value from a seperate Companies table.
So there will be multiple addresses to one LocationID, but each address will have it's own AddressID.
How can I do this efficiently with perfomance in mind???
Thank you in advance for any and all replies...
I'm stuck. I have a table that I want to pull some info from that I don''t know how to.
There are two colomuns, one is the call_id column which is not unique and the other is the call_status column which again is not unique. The call_status column can have several values, they are ('1 NEW','3 3RD RESPONDED','7 3RD RESOLVED','6 PENDING','3 SEC RESPONDED','7 SEC RESOLVED').
i.e example, this is the existing data.
Call_id Call_Status
555555 3 3RD RESPONDED
235252 7 SEC RESOLVED
555555 7 3RD RESOLVED
325252 6 PENDING
555555 6 PENDING
325235 3 SEC RESPONDED
555555 1 NEW
This is the data I want...
Call_id Call_Status
555555 3 3RD RESPONDED
555555 6 PENDING
555555 7 3RD RESOLVED
The call_id could be any number, I only want the 6 PENDING rows where there are other rows for that call_id which have either 3 3RD RESPONDED or 7 3RD RESOLVED. If someone knows how it would be a great help.
Cheers,
Chris
I have questions and answers from one table, I need to select questions as column names and answers column values as the results for the questions column.
View 28 Replies View RelatedA colleague of mine has a view that returns approx 100000 rows in about 60 seconds.
He wants to use the data returned from that view in an OLE DB Source component.
When he selects the view from the drop-down list of available tables then SSIS seems to hang without any data being returned (he waited for about 15 mins).
He then changed the OLE DB Source component to use a SQL statement and the SQL statement was: SELECT * FROM <viewname>
In this instance all the data was returned in approx 60 seconds (as expected).
This makes no sense. One would think that selecting a view from the drop-down and doing a SELECT *... from that view would be exactly the same. Evidently that isn't the case.
Can anyone explain why?
Thanks
-Jamie
How to count the number of values that exist in a row based on the values from an array of numbers. Basically the the array of numbers I want to look for are in row 1 of table [test 1] and I want to search for them and count the "out of" in table [test 2]. Excuse me for not using the easiest way to convey my question below. I guess in short I have 10 numbers and like to find how many of those numbers exist in each row. short example:
Table Name: test1
Columns: m1 (int), m2 (int), m3 (int) >>> etc
Array/Row1: 1 2 3 4 5 6 7 8 9 10
------
Table Name: test2
Columns: n1 (int), n2 (int), n3 (int), n4 (int), n5 (int)
Row 1: 3, 8, 18, 77, 12
Row 2: 1, 4, 5, 7,18, 21
Row 3: 2, 4, 6, 8, 10
Answer: 2 out of 5
Answer: 4 out of 5
Answer: 5 out of 5
Hello all,
I am trying to think my way through a solution which I believe others have probably come across... I am trying to implement a matching routine wherein I need to match an address against a high value and a low value (or, for that matter an input date vs. a start and end date) to return the desired row ... i.e. if I were to use a straight vb program I would just use the following lookup:
"SELECT DISTINCT fire_id, police_ID, fire_opt_in_out, police_opt_in_out FROM ipt_tbl " & _
" WHERE zip_code = @zip_code AND addr_prim_lo <= @street_number AND addr_prim_hi >= @street_number " & _
" AND addr_prim_oe = @addr_prim_oe AND street_pre = @street_pre AND street_name = @street_name " & _
" AND street_suff = @street_suff AND street_post = @street_post " & _
" AND (expiry_date = '' OR expiry_date = '00000000' OR expiry_date > @expiry_date)" & _
" GROUP BY fire_ID, police_ID, fire_opt_in_out, police_opt_in_out"
My question, then, is how would you perform this type of query using a lookup / merge join or script? I have not found a way to implement a way to set the input columns? I can set the straight matches without a problem, i.e. lookup zip code = input zip code, but can't think of the correct way to set comparisons, i.e. lookup value 1 <= input value AND lookup value 2 >= input value
Any suggestions?
thanks for your time...
I have a DTSX package which reads values from a fixed-length text file using a data reader and writes some of the column values from the file to an Oracle table. We have used this DTSX several times without incident but recently the process started inserting NULL values for some of the columns when there was a valid value in the source file. If we extract some of the rows from the source file into a smaller file (i.e 10 rows which incorrectly returned NULLs) and run them through the same package they write the correct values to the table, but running the complete file again results in the NULL values error. As well, if we rerun the same file multiple times the incidence of NULL values varies slightly and does not always seem to impact the same rows. I tried outputting data to a log file to see if I can determine what happens and no error messages are returned but it seems to be the case that the NULL values occur after pulling in the data via a Data Reader. Has anyone seen anything like this before or does anyone have a suggestion on how to try and get some additional debugging information around this error?
View 12 Replies View RelatedI am working with a data set containing several years' of monetary values. I have entries for past dates and the associated values, and I also have entries for future dates. I need to populate the values of the future date records with the values from the same date the previous year. Is there any way this can be done in Power Pivot?
View 6 Replies View RelatedI have a string variable
string str1="1,2,3,4,5";
I have to use the above comma separated values into a SQL Search query whose datatype is integer. How would i do this Search query in the IN Operator of SQL Server. My query is :
declare @id varchar(50)
set @id= '3,4,6,7'
set @id=(select replace(@id,'''',''))-- in below select query Id is of Integer datatype
select *from ehsservice where id in(@id)
But this query throws following error message:
Conversion failed when converting the varchar value '3,4,6,7' to data type int.
I have my stored procedure set to
Territory_code IN (@Territory)
, now , how do i enter in more then one value. When i select the multi value check box, it gives me more spaces. But then doesnt recognize the values when i put in more then one. am i doing something wrong?
The field is a Varchar 20
Hi All,
I receive the input file with some 100 columns and some 20k+ rows and I want to check the incoming input row is existed in the database or not based on 2 key columns. If the row is existed then I need to check all the columns (nearly 100 columns) values in input and the database are equal or not. If both are equal I need to treat them seperately if not there is a seperate logic. How Can I do that check for each row and for each column?
Basically the algorithm is like this, if the input file row is not existed in the database then treat that as new row else if the input row is existed in the database then check all the columns are equal or not. If all the columns are equal then treat that as existing row and do nothing else if some columns are not equal then treat this row seperately.
I found some thing to achieve the above thing.
1. Take the input row and check in the database.
2. If the row is not found in the database then treat it as new row.
3. If row is found in the database then
a) Take the source row and prepare a concatenated string for all the columns
b) Take the database row and prepare a concatenated string for all the columns
c) Find out the hash code for the 2 strings and then compare hash codes for equal.
The disadvantage of this is running a loop 2*m*n times where m is the number of rows and n is the number of columns. It should be done 2 times for input file row and database row.
Can anybody suggest a good method to do this?
What does the function "GetHashCode" for InputBuffer in method "Public Overrides Sub Input0_ProcessInputRow(ByVal Row As Input0Buffer)" will do?
Will it generates hash code based on all the columns values?
Pls clarify.
Regards
Venkat.
I have a situation in SSRS to get the common values between the two columns where the values are sorted comma separated as below.Ex:
ColumnA : abc,cde,efg
ColumnB : cde,xyz,abc
the result in
ColumnC : cde,abc
similarly Column A and B will have n number records. I need to right an expression or the Code function to get the required result in ColumnC. I am using SharePoint Lists as Datasource. Cannot write SQL query to achieve this requirement.
I've got some records like this:
ID_________Jan Feb...........................Dec
0000030257 0 0 0 0 0 0 1 1 1 1 1 0
where each month field has a 0 or 1, depending on if the person was enrolled that month.
I'm being asked to generate a table like this:
ID_________ Start_Date End_Date
0000030257 July 1, 2014 Nov 30, 2014
Is there some slam dunk way to do this without a bunch of If/Then statements?
The editor compressed all my space fields, so the column headers are off in some places.
I have a script that I use after some amount of data massaging (not shown). I would like to be able to change the
1) denominator value (the value 8 in line 32 of my code) based on how many columns are selected by the where clause:
where left(CapNumber,charindex('_', CapNumber)-1) = 1where capNumber is a value like [1_1], [1_4], [1_6]...[1_9] capNumber can be any values from [1_1]...[14_10] depending upon the specialty value (example: Allergy) and the final number after the equal sign is a number from 1 to 14)
2) I'd like to dynamically determine the series depending upon which values correspond to the specialty and run for each where: left(CapNumber,charindex('_', CapNumber)-1) = n. n is a number between 1 and 14.
3) finally I'd like to dynamically determine the columns in line 31 (4th line from the bottom)
If I do it by hand it's 23 * 14 separate runs to get separate results for each CapNumber series within specialty. The capNumber series is like [1_1], [1_2], [1_3],[1_4], [1_5], [1_6], [1_7], [1_8],[1_9]
...
[8_4],[8_7]
...
[14_1], [14_2],...[14_10]
etc.
Again, the series are usually discontinuous and specific to each specialty.
Here's the portion of the script (it's at the end) that I'm talking about:
--change values in square brackets below for each specialty as needed and change the denom number in the very last query.
if object_id('tempdb..#tempAllergy') is not null
drop table #tempAllergy
select *
into #tempAllergy
from
dbo.#temp2 T
[Code] ....
If I were to do it manually I'd uncomment each series line in turn and comment the one I just ran.
I have a table that lists math Calculations with "User Friendly Names" that look like the following:
([Sales Units]*[AUR])
([Comp Sales Units]*[Comp AUR])
I need to replace all the "User Friendly Names" with "System Names" in the calculations, i.e., I need "Sales Units" to be replaced with "cSalesUnits", "AUR" replaced with "cAUR", "Comp Sales Units" with "cCompSalesUnits", and "Comp AUR" with "cCompAUR". (It isn't always as easy as removing spaces and added 'c' to the beginning of the string...)
The new formulas need to look like the following:
([cSalesUnits]*[cAUR])
([cCompSalesUnits]*[cCompAUR])
I have created a CTE of all the "Look-up" values, and have tried all kinds of joins, and other functions to achieve this, but so far nothing has quite worked.
How can I accomplish this?
Here is some SQL for set up. There are over 500 formulas that need updating with over 400 different "look up" possibilities, so hard coding something isn't really an option.
DECLARE @Synonyms TABLE
(
UserFriendlyName VARCHAR(128)
, SystemNames VARCHAR(128)
)
INSERT INTO @Synonyms
( UserFriendlyName, SystemNames )
[Code] .....
I am working with SP. How can we find out values of parameters when the SP is executed with the default values?
View 9 Replies View Related