Hi,
Is it possible to select a record by just the date part of the data type TIMESTAMP?
date_time
2007-04-20 16:27:01
For example, a query to select all records added today.
Thanks very much,
dai.hop
In my database I want to archive some rows based on the time stamp. I read that horizontal partitioning will do that. This partitioning will insert the rows from the table into some other Database - Tablename. In retrivng those rows back I need to issue separate queries and UNION the result set. Is this way is correct or there any better ways to do this? If it is I have another question. If I add a new column to the table I partitioned, what will happen to the table that I stored in other Database. Is that going to add this new column too?
If possible please give me a sample code or queries to partition the database.
Thank you.
Is there a way to extract the date part (11/27/2012) of a datetime/time stamp column (11/27/2012 00:00:00.000) and keep it in a date format?
The code i have below extracts the date part of a timestamp column and converts it to a char field. This becomes a problem when I joing the resultant table with a SAS dataset which contains the same column but is in a date format. The join process generates an error saying the column is in different formats.
convert(char(15), process_date,112) as process_dt
I have a very large CSV file containing name-and-address information which I am reading in a Visual Basic project using the Microsoft.JetOLEDB.4.0 provider.
The key field on which the CSV file is to be filtered is the PostCode field. This is a UK-format PostCode "XXnn Nxx" where "XX" is one or more letters denoting a geographical area within the UK and "nn" is one or more characters (starting with at least one numeric digit) which when combined with the area code denotes a specific district within the geographical area. My aim is to identify all the unique UK postal districts held within my address CSV file.
Because I do not know how to use SQL to filter on the partial contents of a database field I am presently reduced to extracting unique full PostCodes using "SELECT DISTINCT PostCode,City,County FROM [ADDRESSES.csv]" into a DataTable object, then sequentially reading that DataTable using the operation of a dictionary object to identify unique PostCode areas, to finally construct the DataTable I need.
Is it possible in SQL to select records where the value of a varying number of characters before a space character in a given (PostCode) field is unique?
i recently found a little error in a stored procedure that was included in a project handed over to me....
the sp was rather simple. it just inserted a record into a table and returned the identity and the timestamp as follows
IF @@ERROR>0
BEGIN
SELECT @int_InterventionID = 0
RETURN @@ERROR
END
ELSE
BEGIN
SELECT @int_InterventionIDReturned = MAX(InterventionID) FROM tblIntervention
SELECT @ts_TimestampReturned = [Timestamp] FROM tblIntervention WHERE InterventionID = @int_InterventionIDReturned
SELECT @int_InterventionID = @int_InterventionIDReturned, @ts_Timestamp = @ts_TimestampReturned
RETURN 0
END
i figured that it should be using @@Identity for the interventionIdentity rather than max(InterventionID)
so i changed to...
IF @@ERROR>0
BEGIN
SELECT @int_InterventionID = 0
RETURN @@ERROR
END
ELSE
BEGIN
SELECT @int_InterventionIDReturned = @@IDENTITY
SELECT @ts_TimestampReturned = [Timestamp] FROM tblIntervention WHERE InterventionID = @int_InterventionIDReturned
SELECT @int_InterventionID = @int_InterventionIDReturned, @ts_Timestamp = @ts_TimestampReturned
RETURN 0
END
it returns the @int_InterventionIDReturned but the timestamp now comes back as null??? why??
how can i ensure that i always get the timestamp of the record it has just inserted
any help greatly appreciated,
Cheers,
Craig
I have a database that keeps track of pledges, scheduled reminders, and payments.
A user sets up a pledge and then sets up a schedule for reminders to be sent for each payment of the pledge.
Pledge table - PledgeID,PledgeDate,PledgeAmount,etc...
ScheduledReminders table - ScheduleID,PledgeID,DueDate,ReminderDate,ReminderPrintedDate,ReminderPaidDate
AppliedPayments table - ScheduleID,PaymentID,PaidAmount,PaidDate (Junction table between ScheduledReminders and PledgePayments
PledgePayments table PaymentID,PaymentAmount,PaymentDate
What I need to know is, when a payment is being Inserted I need the payment amount applied to the oldest scheduled reminder record that has not been paid. But if the payment is more than the amount shown in the schedule reminder record, I need the balance to be applied to the next oldest schedule reminder record, etc...
Can anyone offer some good suggestions or examples on how to do this?
Hi i was wanting to know how to select a record in a gridview. I have a gridview with firsname and lastname. I currently have select command on it but don't want it. I want to be able to select first name or last name and have it take me to that record on the database.
View 3 Replies View RelatedI'm trying to add a next and previous button to a popup window I have on a photo gallery -
Having trouble with the sql
I know I would have 2 select statements that would each return 1 result set.
I know how to get the top ( and bottom by ordering descending and doing Select Top 1)
But how would I get the next one up!
I would hate returning the entire image section and perform the calcuation in the business tier :(
I have one table like this:
Code:
CREATE TABLE DlIndexTable
(SessionStartTime DATETIME NOT NULL PRIMARY KEY, SchemaID INTEGER NOT NULL,
DLBaseRate REAL NOT NULL)
and one like so:
Code:
CREATE TABLE DlTextDataTable (
SessionStartTime DATETIME NOT NULL REFERENCES DlIndexTable,
ChTimestamp FLOAT NOT NULL, Channel01data VARCHAR (255),
Channel02data VARCHAR (255), ... , Channel16data VARCHAR (255),
CONSTRAINT TxtDatPriKey PRIMARY KEY (SessionStartTime, ChTimestamp))
I want to get some combined data from both tables, so right now I am joining them at the SessionStartTime column, which is a primary key in the first and a foreign key in the second table, something like this:
Code:
SELECT DlIndexTable.SessionStartTime, DlTextDataTable.Channel01data
FROM DlIndexTable
LEFT JOIN DlTextDataTable
ON DlIndexTable.SessionStartTime = DlTextDataTable.SessionStartTime
WHERE DlIndexTable.SessionStartTime BETWEEN '2006-10-13 16:40:08.790' AND '2012-03-01 17:54:30.930'
ORDER BY DlIndexTable.SessionStartTime, DlTextDataTable.ChTimestamp
The trouble is that this query, exactly as requested, gives me all the entries from the second table matching the first, while I really would like to pick just one row (preferably, the first chronologically - by ChTimestamp) so that the first column (SessionStartTime) has distinct entries in the resulting table. What would be the simplest way of doing that? Performance is not a big priority over simplicity since the first table could have only a few hundred rows (maybe a couple of thousand), while the second will be real tiny.
I’m writing a document management system. The documents themselves are created from the contents of a database. The database is SQL Server.
The database contains a table, like so:
ClientID, ProjectID, DocumentID, MinorVersion, MajorVersion, Name
Initially, the user will create a “V0.1” document. So the data would look something like
ClientID = 1
ProjectID = 1
DocumentID = 1
MajorVersion = 0
MinorVersion = 1
Name = “My Document”
Thereafter, the user can create new versions as “0.2”, “0.3”, etc., or “1.0”, “1.1”, “2.0”, etc.
For example, a “2.1” document would be stored as:
ClientID = 1
ProjectID = 1
DocumentID = 1
MajorVersion = 2
MinorVersion = 1
Name = “My Document”
The earlier versions will still exist on the database, but the latest version will be 2.1.
There may be several different documents, with different DocumentID’s (e.g. DocumentID = “1”, DocumentID = “2”), etc., and each of these documents may have many versions.
I’m trying to write a query to display a list of documents showing ClientID, ProjectID, DocumentID, MinorVersion, MajorVersion, Name… but the list should only display the latest version of each document.
So, if the database contained the following records:
ClientID, ProjectID, DocumentID, MajorVersion, MinorVersion, Name
1,1,1,0,1,My Document
1,1,1,0,2,My Document
1,1,1,0,3,My Document
1,1,1,1,0,My Document
1,1,1,2,0,My Document
1,1,1,2,1,My Document
1,1,2,0,1,My Second Document
1,1,2,0,2,My Second Document
1,1,2,0,3,My Second Document
My query should return:
ClientID, ProjectID, DocumentID, MajorVersion, MinorVersion, Name
1,1,1,2,1,My Document
1,1,2,0,3,My Document
… where 2.1 is the latest version of Document 1 and 0.3 is the latest version of Document 2.how to do it.
MSSQL2000I have a table that contains customer transactionsCustomerIDTransactionTransactionDate....I need to select the most recent record that matches a specific CustomerID.I am fairly new to SQL, could someone provide a sample select statement.TIATim Morrison-- Tim Morrison--------------------------------------------------------------------------------Vehicle Web Studio - The easiest way to create and maintain your vehicle related website.http://www.vehiclewebstudio.com
View 3 Replies View RelatedI have a stored procedure (below), that is supposeto get a Reg Number from a table, (Reg_Number), insuch a way that every time the stored procedure is called,it will get a different reg number, even if the storedprocedure is called simultaneously from two differentplaces,However it is not working that way.If two different users access a function in thereVB program at the same time, the two different userswill get the same reg number.I have looked at the stored procedure, it looks foolproof,yet it is not working that way.Thanks in Advance,Laurence NuttallProgrammer Analyst IIIUCLA - Division of Continuing Education'---------------------------------------------------------------------------Here it is:CREATE PROCEDURE sp_GetNextRegNum@newRegNum char(6) = NULL OUTPUTASLABEL_GET_ANOTHER_REG:Select @newRegNum =(select min(Reg) from reg_number)IF Exists (select Reg from reg_number where reg = @newRegNum )BeginDelete from reg_number where reg = @newRegNumIF @@Error <> 0BeginGoto LABEL_GET_ANOTHER_REGEnd--EndifEndELSEGoTo LABEL_GET_ANOTHER_REG--EndifGO
View 6 Replies View Related
This is my first post so I hope I'm doing it to the right forum. I need to compare a LastUpdated time to Start and End Time fields to get the "Due" Time for a given order. Can someone give me the correct SQL? (the example below should result in 6:00:00 AM "Due" time.) All are DATETIME fields. Thank you.
LastUpdated StartTime EndTime DueTime
5/29/2007 12:04:32 AM 2:00:00 AM 11:30:00 AM 3:30:00 PM
11:30:00 AM 5:00:00 PM 9:00:00 PM 5:00:00 PM 2:00:00 AM 6:00:00 AM
Hello.
I need to select a random record from TABLE. It might look easy with using RAND() function, but the tricky part is that ID's which are the PRIMARY KEY, were assigned as a random number.
So right now ID's in that TABLE look some thing like that: -18745, 45809, 129, -5890023, 487910943, -209, etc...
If any one have any ideas please respond.
Thanks in advance.
Hi all,
I Have the following situation:
CREATE TABLE First_Table (id INTEGER IDENTITY(1,1) NOT NULL,
titre VARCHAR(50) NOT NULL,
annee INTEGER NOT NULL,
idMES INTEGER,
genre VARCHAR(20) NOT NULL,
resume TEXT,
codePays VARCHAR(4),
CONSTRAINT PKFilm PRIMARY KEY (idFilm),
FOREIGN KEY (idMES) REFERENCES Artiste,
FOREIGN KEY (codePays) REFERENCES Pays);
I'ld like fill in this tables records inserting in the column id values I got in the one other table. In Oracle it is possible to do it using sourceTable.nextval where sourceTable is created as: CREATE SEQUENCE sourceTable;
How can I do it in MS SQL or Transact-sql?
Thanx all
I'm no SQL whizz yet but I'm learning hard, and need to get some information from our DB rather urgently so have resorted to this fantastic forum, only I can't find what I'm looking for.
Basically I'm selecting a whole load of entries that have a (admission)date field after 2001, but I only want to return the Earliest (admission) for each (patients number).
Here is the script I have created to select all the data, but how can I limit the results to just the earliest (admission date) for each (patient).
SELECT
Admission_Year, Admission_Month, Age_On_Admission, [Length of stay(continuing)], [Patient's Number], [Cons epis seq no], Sex, [Main Primary Pas Diag], [Date of Death], [Epi duration], [OP Code1], [Admission date], [Date of Death] - [Admission date] AS [days before death],[Intended Management]
FROM dbo.Admissions
WHERE (Admission_Year > 2001) AND (Age_On_Admission > '64') AND ([Intended Management] = 'inpatient') AND ([Date of Death] IS NULL)
I would really appreciate it if anyone can help with this, I'm sorry I can't really contribute to this forum as an SQL expert as .net is really my forte and I usually spend my time contributing to the asp.net forums. :)
Hi
I'm sure this is an easy problem but my brain is fried today...however how do I do the following:
I have a two column table. One is a key field where duplicates can arise and the other is a datetime field. So you might have some records looking like this:
1231999-06-14 12:17:11.000
1231999-06-14 12:17:31.310
1231999-06-14 12:17:31.000
1231999-06-14 12:22:56.000
1231999-06-14 12:22:58.000
8901999-06-15 10:00:18.000
8901999-06-15 10:03:30.340
8901999-06-15 10:03:30.000
8901999-06-15 10:03:40.000
OK, how do I get the top 1 of each key so that I get a subset of records looking like the following:
1231999-06-14 12:17:11.000
8901999-06-15 10:00:18.000
Thanks in advance
Bazza
I have the following query I am using to identify duplicate records in one of my database tables:
Code:
SELECT memberID,
COUNT(memberID) AS NumOccurrences
FROM ChapterMembers
GROUP BY memberID
HAVING ( COUNT(memberID) > 1 )
Executing the above proc returns 4079 records...
Now, I would also like to know the ChapterID for each member with a duplicate record. ChapterID is also stored in the ChapterMembers Table...
I tried running the following procedure:
Code:
SELECT memberID,
COUNT(memberID) AS NumOccurrences, chapterID
FROM ChapterMembers
GROUP BY memberID, chapterID
HAVING ( COUNT(memberID) > 1 )
But zero results are returned ...
The ultimate goal here is to identify duplicate records where one of their chapterID's = '81017' and to delete that record from the database.
Anyone have any ideas what I am doing wrong? Also, any suggestions for removing the records would be appreciated.
Thanks,
Jandrews
The situation is that we have resources (trucks) that perform shifts. Shifts consists of actions. A resource can perform multiple shifts.
For every resource we want to find the record that:
- Is 'younger' than the last realized action.
- Has actionkind pickup, deliver or clean
I have constructed a solution with CTE and row_number but I was curious if there would be other alternatives. The fact that I'm joining a CTE onto itself and subject the outcome to a partition makes me think there are sharper ways.
Note that the action id in the data below is also sorted but in practice this need not be the case. The sorting key is prevalent.
output of the query is
id_action id_resource actionKindCode
4665 4 clean
34540 96 pickup
24000 901 clean
declare @mytable table (
id_action int,
id_shift int,
[code]....
Hello everyone, I have a query problem.I'll put it like this. There is a 'publishers' table, and there is a'titles' table. Publishers publish titles (of course). Now I want to make aquery (in MS SQL Server) that would return the last title published by everyof the publishers. Quite clear situation. But I can't make it work.If I use inner join (which I should, because I need data from both tables)then I get a result showing all publishers and all titles. What I want toget is all publishers, and only their last title, so I don't have more thanone line for the same publisher, and this line should contain publisherdetails and last title details.I tried using DISTINCT, but it works on a whole resultant row rather then acolumn, and since rows are all distnict (because they also contain columnsfrom titles) this didn't help me.What I can do is (in my application) first get a list of publishers, andthen loop through them selecting only the last title belonging to eachpublisher. I want to see if there is a way to accomplish the same thing withan SQL query (or maybe a stored procedure, view, or whatever). Anything ispossible, as long as it stays within SQL server and doesn't rely on theclient application.Of course, both 'publishers' and 'titles' tables have a primary key('publisherID', and 'titleID'), and 'titles' has a 'publisherID' columnwhich relates titles with publishers.Help :)
View 4 Replies View RelatedGood Morning,I have a person table with personID. I have a personRate table withpersonID, rateID, and effectiveDate.I need to select fields from personRate, but I want the fields from theproper record.I need the one child record that has the most current date of the largestrateID.For example a person may have many rate records. I need the record that hasthe most current date of the largest rateID they have. Does that makesense?I am making a view that has data from both tables. I need to display themost current rate info.Any ideas? TIA ~ CK
View 4 Replies View RelatedI have created the following SQL snippet that is a very simple mock-up illustrating the problem (I hope!) that I am facing:
-- create table
if object_id('tempdb..#tmpdelnotes') is not null
drop table #tmpdelnotes
create table #tmpdelnotes(
DelNote int identity (1,1) ,
DelDate date not null,
Item int not null,
Customer int not null)
[code]...
What I need to retrieve is a unique list of item numbers with information about the latest (DelDate) delivery note. The "Clumsy workaround" works, but is not very pretty when doing multiple table joins. Is it really necessary to use a derived table for this kind of query? Window functions can only exist in the SELECT and ORDER BY clauses, which is understandable since the calculations take place (I would guess) after the aggregations in the HAVING clause.
I have inherited a query which currently returns multiple instances of each work order because of the joined tables. The code is here and I've detailed the criteria needed below but need the best way to accomplish this:
Select h.worknumber, h.itemcode, h.descr, h.task_descr, h.qty, h.itemised,
h.serialnum, h.manufacturer, h.model_id, h.depot, h.date_in, h.date_approved,
h.est_complete_date, h.actual_complete_date, h.meterstart, h.meterstop,
h.custnum, h.name cust_name, h.addr1, h.addr2, h.town, h.county, h.postcode,
h.country_id, h.contact, h.sitename, h.siteaddr1, h.siteaddr2, h.sitetown,
[Code] ....
Each work order should only be returned once, and with the following additional criteria:
1. i.meter - this should return only the lowest number from that file.
2. sm.next_calendar_date - this should return only the most recent date out of those selected for the certificates on this piece of equipment
3. wh.meterstop as [Last Service Hours],
wh.date_created as [Last Service] - this should return the number from wh.meterstop at the most recent wh.date_created for that piece of equipment.
Hi,I have a stored procedure that has to extract the child records forparticular parent records.The issue is that in some cases I do not want to extract all the childrecords only a certain number of them.Firstly I identify all the parent records that have the requird numberof child records and insert them into the result table.insert into t_AuditQualifiedNumberExtractDetails(BatchNumber,EntryRecordID,LN,AdditionalQualCritPassed)(select t1.BatchNumber,t1.EntryRecordID,t1.LN,t1.AdditionalQualCritPassedfrom(select BatchNumber,RecordType,EntryRecordID,LN,AdditionalQualCritPassedfrom t_AuditQualifiedNumberExtractDetails_Temp) as t1inner join(select BatchNumber,RecordType,EntryRecordID,Count(*) as AssignedNumbers,max(TotalNumbers) as TotalNumbersfrom t_AuditQualifiedNumberExtractDetails_Tempgroup by BatchNumber, RecordType, EntryRecordIDhaving count(*) = max(TotalNumbers)) as t2on t1.BatchNumber = t2.BatchNumberand t1.RecordType = t2.RecordTypeand t1.EntryRecordID = t2.EntryRecordID)then insert the remaining records into a temp table where the number ofrecords required does not equal the total number of child records, andthenloop through each record manipulating the ROWNUMBER to only selectthe number of child records needed.insert into @t_QualificationMismatchedAllocs([BatchNumber],[RecordType],[EntryRecordID],[AssignedNumbers],[TotalNumbers])(select BatchNumber,RecordType,EntryRecordID,Count(*) as AssignedNumbers,max(TotalNumbers) as TotalNumbersfrom t_AuditQualifiedNumberExtractDetails_Tempgroup by BatchNumber, RecordType, EntryRecordIDhaving count(*) <max(TotalNumbers))SELECT @QualificationMismatched_RowCnt = 1SELECT @MaxQualificationMismatched = (select count(*) from@t_QualificationMismatchedAllocs)while @QualificationMismatched_RowCnt <= @MaxQualificationMismatchedbegin--## Get Prize Draw to extract numbers forselect @RecordType = RecordType,@EntryRecordID = EntryRecordID,@AssignedNumbers = AssignedNumbers,@TotalNumbers = TotalNumbersfrom @t_QualificationMismatchedAllocswhere QualMismatchedAllocsRowNum = @QualificationMismatched_RowCntSET ROWCOUNT @TotalNumbersinsert into t_AuditQualifiedNumberExtractDetails(BatchNumber,EntryRecordID,LN,AdditionalQualCritPassed)(select BatchNumber,EntryRecordID,LN,AdditionalQualCritPassedfrom t_AuditQualifiedNumberExtractDetails_Tempwhere RecordType = @RecordTypeand EntryRecordID = @EntryRecordID)SET @QualificationMismatched_RowCnt =QualificationMismatched_RowCnt + 1SET ROWCOUNT 0endIs there a better methodology for doing this .....Is the use of a table variable here incorrect ?Should I be using a temporary table or indexed table if there are alarge number of parent records where the child records required doesnot match the total number of child records ?
View 2 Replies View Related
This is a simple one, and I know that it has to be fairly common, but I just can't figure out an elegant way to do it. I have a table with the following fields:
OrderID (FK, not unique)
InstallationDate (Datetime)
CreateDtTm (Datetime)
There is no PK or Unique ID on this table, though an combo of OrderID and CreateDtTm would ostensibly be a unique identifier.
For each OrderID, I need to pull the InstallationDate that was created most recently (based on CreateDtTm). Here's what I've got so far, and it works, but man is it ugly:
SELECT a.OrderID, InstallationDate
FROM ScheduleDateLog a
INNER JOIN
(SELECT OrderID, max(convert(varchar(10),CreateDtTm,102)+'||' +convert(varchar(10), InstallationDate,102)) as TopRecord
FROM ScheduleDateLog GROUP BY OrderID) as b
ON convert(varchar(10),CreateDtTm,102)+'||' +convert(varchar(10), InstallationDate,102)=b.TopRecord
AND a.OrderID = b.OrderID
I have a table (Billing Table) having multiple records for people having one record per person per each month.
How to get a list of the guys having record just for one month (say feb) and doesn't have any other months.
When I run this query:
SELECT orderno, *
FROM _order
WHERE order_date >= '5/14/2015 00:00:00'
AND order_date < '5/15/2015 11:59:59'
ORDER BY order_date asc
I get a result of:
A1G7222015-05-14 13:00:11.143
A1G7232015-05-14 13:33:35.407
A1G7242015-05-14 13:39:16.657
A1G7252015-05-14 14:25:43.507
A1G7262015-05-14 14:29:18.050
A1G7272015-05-14 15:38:12.263
But I know there is one more record that falls into 05/15/2015
A1G7282015-05-15 12:26:52.807
Can you see what I am missing in my query in order for me to retrieve the missing record A1G728?
I have a database full of different types of leads some for company A some for company B and so on, each doing a different service. However the leads from B can be used for A and leads from A can be used for B, so I want to merge the data.
Example:
Phone Number Name Home Owner Credit Insurance
727-555-1234 Dave Thomas Yes B
727-555-1234 Dave Thomas Gieco
I would like the end result to be one record:
Phone Number Name Home Owner Credit Insurance
727-555-1234 Dave Thomas Yes B Gieco
Since these were imported into SQL they all have a unique ID, here are the current labels
ID,phone_ number,first_ name,last_name,address1, address2, address3,city,state,postal_code,HOME_OWNR,HH_INCOME,CREDIT_RATING,AGE,MATCH,source_id,
title,comments,dnc_flag,provider,vehicle,coverage,alt_phone,email,marital status,dob
I am populating oracle source in Sql Server Destination. after few rows it fails it displays this error:
[OLE DB Destination [16]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server" Hresult: 0x80004005 Description:
"Invalid date format".
I used this script component using the following code in between the adapters, However after 9,500 rows it failed again giving the same above error:
To convert Oracle timestamp to Sql Server timestamp
If Row.CALCULATEDETADATECUST_IsNull = False Then
If IsDate(DateSerial(Row.CALCULATEDETADATECUST.Year, Row.CALCULATEDETADATECUST.Month, Row.CALCULATEDETADATECUST.Day)) Then
dt = Row.CALCULATEDETADATECUST
Row.CALCULATEDETADATECUSTD = dt
End If
End If
I don't know if my code is right . Please inform, how i can achieve this.
date time s-sitename TimeTaken(Seconds)
6/8/2015 10:56:26 TestSite 100
6/8/2015 10:56:26 TestSite 500
6/8/2015 10:56:26 TestSite 800
6/9/2015 11:56:26 TestSite 700
6/9/2015 11:56:26 TestSite 200
6/12/2015 12:56:26 TestSite 700
I have a table with above values, I am looking for a sql query to find AvgTimeTaken at different time stamps and total count of each time stamp
Output
date time s-sitename TimeTaken(Seconds) Count_of_Request
6/8/2015 10:56:26 TestSite 1400 3
6/9/2015 11:56:26 TestSite 900 2
6/12/2015 12:56:26 TestSite 700 1
I have SSRS 2005 SP2 configured to work in Sharepoint integration. Everything works fine except that I am not able to programmatically change any property of report viewer web part (instance) that I have added on on home page of my sharepoint site.
I can do same thing via sharepoint UI but not through program. When my programs runs it fetches all web parts been added on home page, then I need to iterate through each one and find report viewer web part.
While iterating, as soon as I arrive to report viewer web part it is named as "Error web part" with error message as
"Windows SharePoint Services cannot deserialize the Web Part. Check the format of the properties and try again"
If someone has a solution, please respond at your earlist.
Thanks
Shankar
I have a table with a column named measurement decimal(18,1). If the value is 2.0, I want the stored proc to return 2 but if the value is 2.5 I want the stored proc to return 2.5. So if the value after the decimal point is 0, I only want the stored proc to return the integer portion. Is there a sql function that I can use to determine what the fraction part of the decimal value is? In c#, I can use
dr["measurement "].ToString().Split(".".ToCharArray())[1] to see what the value after the decimal is.
I have made the following Scalar-valued function:
CREATE FUNCTION [dbo].[TimeCalc]
(
@OriginalTime AS INTEGER
, @TenthsOrHundredths AS INTEGER -- code 2: 1/10, code 4: 1/100
)
RETURNS NVARCHAR(8)
[Code] ....
What it does is convert numbers to times
E.g.: 81230 gets divided by 10 (times in seconds: 8123). This 1 1 full minute, and the remainder = 2123 making it 1.21.23 mins)
So far so good (function works perfectly)
My question: sometimes times are in 1/100 (like above sample), sometimes in 1/10.
This means that, e.g. with a time like 3.23.40 the last zero must be deleted.
My thoughts are to use the results from the Return Case part, and as the code = 4: leave it as it is,
is the code 2 the use LEFT(... result Return Case ..., Len(..result Return Case.. - 1))
There are 5 codes: 0 1 2 3 and 4