Selecting A Sub Set Of Results
Jan 17, 2008
Hi hopeful this will be a quick one, i have a query that returns a hell of a lot of records not if i do top 1000 i can get the first thousand, is there a simple way to then get the second thousand and the third?
because i need to process the data but with it going all in one go it's being a bit of a resource hog.
this is best i've come up with so far but I'm hoping for a better method
SELECT TOP 10 *
FROM testtable
WHERE id NOT IN
(SELECT TOP 10 id
FROM testtable)
View 14 Replies
ADVERTISEMENT
Nov 28, 2006
Hello,
I have a table of names/dates as such:
Class 1 1/1/2007Class 1 1/3/2007Class 1 1/5/2007Class 2 2/1/2007Class 2 2/3/2007Class 3 3/1/2007
What I want to do is select only the nearest entry from the list for each distinct class, so the results are like this:
Class 1 1/1/2007Class 2 2/1/2007Class 3 3/1/2007
So basically, I want the first upcoming class in the list for each distinct class name. How do I do this? I'm using SQL 2005 Express.
Thanks.
View 3 Replies
View Related
Nov 2, 2007
I want to break up a set of search results into small chunks. For instance, think about how Google displays a block of ten results out of the entire set. Selecting the top 10 is dead easy with "TOP 10"; how do I select the next 10?
Obviously one option would be to select the top 20, and programmatically discard the first 10, but surely there is a better way? I am doing this for a ASP.NET 2.0 application, and if I can retrieve just what I want, I can DataBind to a Repeater, and let ASP.NET do all the hard work of displaying the data.
View 4 Replies
View Related
Nov 20, 2007
Hi,
These aren't my tables, but lets dumb it down for my sake!
I have 2 tables:
CompanyInfo: IDNumber, EffectiveDate, CompanyName
TransacationInfo: TransactID, CompanyID, TransDate, Amount
There are several records in TransactionInfo for each record in CompanyInfo.
I want to:
SELECT CompanyInfo.IDNumber, CompanyInfo.EffectiveDate, CompanyInfo.CompanyName,
SUM(TransactionInfo.Amount)
How can I do this? Can I?
View 4 Replies
View Related
Sep 20, 2007
I've got a big problem that I'm trying to figure out:
I have an address table out-of-which I am trying to select mailing addresses for companies UNLESS a mailing address doesn't exist; then I want to select the physical addresses for that company. If I get multiple mailing or physical addresses returned I only want the most recently edited out of those.
I don't need this for an individual ID select, I need it applied to every record from the table.
My address table has some columns that look like:
[AddressID] [int]
[LocationID] [int]
[Type] [nvarchar](10)
[Address] [varchar](50)
[City] [varchar](50)
[State] [char](2)
[Zip] [varchar](5)
[AddDate] [datetime]
[EditDate] [datetime]
AddressID is a primary-key non-null column to the address table and the LocationID is a foreign key value from a seperate Companies table.
So there will be multiple addresses to one LocationID, but each address will have it's own AddressID.
How can I do this efficiently with perfomance in mind???
Thank you in advance for any and all replies...
View 2 Replies
View Related
Apr 1, 2007
hi, like, if i need to do delete some items with the id = 10000 then also need to update on the remaining items on the with the same idthen i will need to go through all the records to fetch the items with the same id right? so, is there something that i can use to hold those records so that i can do the delete and update just on those records and don't need to query twice? or is there a way to do that in one go ?thanks in advance!
View 1 Replies
View Related
Mar 25, 2015
I have four tables: Customer (CustomerId INT, CountyId INT), County (CountyId INT), Search(SearchId INT), and SearchCriteria (SearchCriteriaId INT, SearchId INT, CountyId INT, [others not related to this]).
I want to search Customer based off of the Search record, which could have multiple SearchCriteria records. However, if there aren't any SearchCriteria records with CountyId populated for a given Search, I want it to assume to get all Customer records, regardless of CountyId.
Right now, I'm doing it this way.
DECLARE @SearchId INT = 100
SELECT * FROM Customer WHERE
CountyId IN
(
SELECT CASE WHEN EXISTS(SELECT CountyId FROM SearchCriteria WHERE SearchId = @SearchId)
THEN SearchCriteria.CountyId
[Code] .....
This works; it just seems cludgy. Is there a more elegant way to do this?
View 4 Replies
View Related
Feb 12, 2008
Hello. I currently have a website that has a table on one webpage. When a record is clicked, the primary key of that record is transfered in the query string to another page and fed into an sql statement. In this case its selecting a project on the first page, and displaying all the scripts for that project on another page. I also have an additional dropdownlist on the second page that i use to filter the scripts by an attribute called 'testdomain'. At present this works to an extent. When i click a project, i am navigated to the scripts page which is empty except for the dropdownlist. i then select a 'testdomain' from the dropdownlist and the page populates with scripts (formview) for the particular test domain. what i would like is for all the scripts to be displayed using the formview in the first instance when the user arrives at the second page. from there, they can then filter the scripts using the dropdownlist.
My current SQL statement is as follows.
SelectCommand="SELECT * FROM [TestScript] WHERE (([ProjectID] = @ProjectID) AND ([TestDomain] = @TestDomain))"
So what is happening is when testdomain = a null value, it does not select any scripts. Is there a way i can achieve the behaivour of the page as i outlined above? Any help would be appreciated.
Thanks,
James.
View 1 Replies
View Related
May 14, 2008
Hi All,
I have a stored proc which is executing successfully...but the results of that stored proc are displaying in the Messages Tab instaed of results Tab. And in the Results Tab the results shows as 0..So, Any clue friends..it is very urgent..I am trying to call this stored proc in my Report in SSRS as well but the stored proc is not displaying there also...Please help me ASAP..
Thanks
dotnetdev1
View 4 Replies
View Related
Jun 18, 2008
Hi all, I have the following SQLDataSource statement which connects to my Gridview:<asp:SqlDataSource ID="SqlDataSourceStandings" runat="server" ConnectionString="<%$ ConnectionStrings:ConnectionString %>" SelectCommand="SELECT P.firstName, P.lastName, T.teamName, IsNull(P.gamesPlayed, 0) as gamesPlayed, IsNull(P.plateAppearances,0) as plateAppearances, IsNull( (P.plateAppearances - (P.sacrifices + P.walks)) ,0) as atbats, IsNull(P.hits,0) as hits, P.hits/(CONVERT(Decimal(5,2), IsNull(NullIF(P.atbats, 0), 1))) AS [average], (P.hits + P.walks)/(CONVERT(Decimal(5,2), IsNull(NullIF( (P.atbats + P.sacrifices + P.walks) , 0), 1))) AS [OBP], (P.hits - (P.doubles + P.triples + P.homeRuns) + (2 * P.doubles) + (3 * P.triples) + (4 * P.homeRuns)) / (CONVERT(Decimal(5,2), IsNull(NullIF(P.atbats, 0), 1))) AS [SLG], P.singles, P.doubles, P.triples, P.homeRuns, P.walks, P.sacrifices, P.runs, P.rbis FROM Players P INNER JOIN Teams T ON P.team = T.teamID ORDER BY P.firstName, P.lastName"></asp:SqlDataSource>There are 8 teams in the database, and somehow the average and obp results are as expected for all teams except where T.teamID = 1. This doesn't make sense to me at all! For example, I get the following results with this same query: First NameLast NameTeamGPPAABHAVGOBPSLG1B2B3BHRBBSACRRBI
BrianAustinHope83432230.7187500.7352941.15625014612201221
GabrielHelbigSafe Haven62119141.0000000.9375002.1428576404111519
MarkusJavorSafe Haven82927200.8695650.8000001.21739114501021218
RobBennettMelville83029240.8275860.8333331.55172411904102117
AdamBiesenthalSafe Haven82929210.9130430.9130431.56521712631001015
ErikGalvezMelville82625180.7200000.7307691.24000011322101015 As you can see, all teams except for Safe Haven's have the correct AVG and OBP. Since AVG is simply H/AB, it doesn't make sense for Gabriel Helbig's results to be 1.00000. Can anyone shed ANY light on this please?Thank you in advance,Markuu ***As a side note, could anyone also let me know how I could format the output so that AVG and OBP are only 3 decimal places? (ex: 0.719 for the 1st result)***
View 2 Replies
View Related
Oct 19, 2007
Hi,
I have a web form that lets users search for people in my database they wish to contact. The database returns a paged set of results using a CTE, Top X, and Row_number().
I would like to give my users to option of removing individual people from this list but cannot find a way to do this.
I have tried creating a session variable with a comma delimited list of ID's that I pass to my sproc and use in a NOT IN() statement. But I keep getting a "Input string was not in a correct format." Error Message.
Is there any way to do this? I am still new to stored procedures so any advice would be helpful.
Thanks
View 3 Replies
View Related
Jan 30, 2008
Hi, when I copy and paste results from query analyzer into Excel it appears that values with zeroes at the end loose the zeroes. Example, if I copy and paste V128.0 into an Excel cell it comes out as V128 or if I copy 178.70 it displays as 178.7 - any ideas? I'm using SQL Enterprise Manager for 2000.
View 6 Replies
View Related
Feb 21, 2006
A colleague of mine has a view that returns approx 100000 rows in about 60 seconds.
He wants to use the data returned from that view in an OLE DB Source component.
When he selects the view from the drop-down list of available tables then SSIS seems to hang without any data being returned (he waited for about 15 mins).
He then changed the OLE DB Source component to use a SQL statement and the SQL statement was: SELECT * FROM <viewname>
In this instance all the data was returned in approx 60 seconds (as expected).
This makes no sense. One would think that selecting a view from the drop-down and doing a SELECT *... from that view would be exactly the same. Evidently that isn't the case.
Can anyone explain why?
Thanks
-Jamie
View 2 Replies
View Related
Jun 10, 2004
Hi,
I am trying to select all entries from a database apart from the top/latest entry, via a stored procedure.
Below is the code that i have but i am doing it wrong somehow.
Any ideas?
Thanks
CREATE PROCEDURE spNEWSARCHIVE AS
SELECT *
FROM tblNEWS
WHERE NewsID NOT TOP 1
ORDER BY NewsID DESC
GO
View 7 Replies
View Related
Apr 14, 2006
Hi,I have the following set and would like to select all rows that havemin value of column 4 for a given column 1 and 2 group, irrespective ofcolumn 3, as below:C1 C2 C3 C4---------------------A B x 5A B y 10A BB XX 55A BB YY 11AA CC z 1AA CC zz 11Need---A B x 5A BB YY 11AA CC z 1using sql server 2000 (which does not provide rank or partition by)Thanks in advance,Tamas
View 2 Replies
View Related
Sep 5, 2006
Hello,I have a gridview bound to a sqldatasource control. I have an emptydatatemplate setup. In the selecting event, I make sure that an actual select has been performed (and not on null data); however, I have cancelselectonnullparameters set to true to stop it, because initially it will be null.However, the selecting event runs, even when I cancel it, the emptydatatemplate shows up. How do I prevent that from occuring?
View 2 Replies
View Related
Jan 7, 2007
Hi Folks,
You can select all fields with:SELECT * FROM [TableName]
How do you select NOTHING or NONE with a SELECT statement?
Thanks
View 4 Replies
View Related
Feb 19, 2007
Dear All,
I need to select records between two datetimes.
My Database Structure and sample values are as below
Fromdate ToDate
2007-02-20 09:00:00.000 2007-02-20 12:00:00.0002007-02-20 08:00:00.000 2007-02-20 12:00:00.0002007-02-20 06:00:00.000 2007-02-20 13:00:00.000
Query i used
select * from tablename where ((fromdate between Convert(datetime,'2007-19-2 10:00',103) and Convert(datetime,'2007-19-2 11:00',103)) or (todate between Convert(datetime,'2007-19-2 10:00',103) and Convert(datetime,'2007-19-2 11:00',103)))
My query is not returning values when i am querying between '2007-19-2 10:00' and '2007-19-2 11:00'
Please help
Thanks
View 5 Replies
View Related
Jul 18, 2007
Hi, This is quite an obvious problem, but for some reason I can't think through the solution. I have two columns, a datetime (datecreated) and an id (FK) othertableid (id)what I would like to be able to do is select a list of id and datecreated, but only chose the latest row for each id.So I guess it's a bit like a distinct on the id column, but ensuring the date returned is the top date. Please help
View 1 Replies
View Related
Sep 4, 2007
Hi i was wanting to know how to select a record in a gridview. I have a gridview with firsname and lastname. I currently have select command on it but don't want it. I want to be able to select first name or last name and have it take me to that record on the database.
View 3 Replies
View Related
Apr 21, 2008
hello all,
i have a nested gridview. how do i add a SELECTING event for this datasource for my inner gridview? because i need to increase the commandtimeout. thnx.
private SqlDataSource ChildDataSource(string strCustno) { string strQRY = "Select ..."; SqlDataSource dsTemp = new SqlDataSource(); dsTemp.ConnectionString = ConfigurationManager.ConnectionStrings["MyConnectionString"].ConnectionString ; dsTemp.SelectCommand = strQRY; return dsTemp; }
View 1 Replies
View Related
Jun 15, 2008
How can I select data between Mth row and Nth row from a specific search condition? for example , I want to get the 5th to 10th employee who is born in March and ordered by their name.
View 1 Replies
View Related
Oct 21, 2004
Hello:
I have one table and it contains a column named ID Number, and a column named Date. I have a Do While statement that runs a SQL select statement a few times based on the number of records with the same ID Number. During the Do While statement the information is copied into another table and deleted from the old table. After I look at the results, I see that at the second Do While loop, the data was not selected and the Select statement did not run... so the old variable value from varValue is used again... Any reasons on why?
Here is a code snippet of what is going on:
Do While varCount < varRecordCount
conSqlConnect.Open()
cmdSelect = New SqlCommand ("Select * From temp_records_1 where [id number]=@idnumber and date<@date", conSqlConnect)
cmdSelect.Parameters.Add( "@accountnumber", "10000" )
cmdSelect.Parameters.Add( "@date", dtnow )
dtrdatareader = cmdSelect.ExecuteReader()
While dtrdatareader.Read()
If IsDbNull(dtrdatareader("value")) = false Then
varValue = dtrdatareader("value")
End If
End While
dtrdatareader.Close()
conSqlConnect.Close()
'#####The information above is copied to another table here
'#####The record where the information was received is deleted.
varCount = varCount + 1
LoopAny ideas?
View 2 Replies
View Related
Jun 2, 2005
I have a tbale with maybe 30 columns and I'm selecting all where a
record number matches a parameter I've passed. That works fine,
however is there any way to do some conversions to fields when
selecting without having to list out each column? For instance
this is what it looks like now:
SELECT *
FROM Losses
WHERE @AppRecord = AppRecord
ORDER BY Record ASC
But I want to convert say one column, is there a way to keep similar syntax instead of listing out each column?
SELECT *, CONVERT(varchar(15), [Losses]) as [Losses]
FROM Losses
WHERE @AppRecord = AppRecord
ORDER BY Record ASC
And the column I'm converting is of type 'money'. I'm converting
it to get rid of the extra zeroes at the end. If you know a
better way to do it I'd be interested in knowing.
View 4 Replies
View Related
Sep 6, 2005
CREATE PROCEDURE {databaseOwner}{objectQualifier} [PreciseData_IssueTracker_GetAllIssues]@moduleId intASSELECT PreciseData_IssueTracker_Issue.id AS 'issueId',PreciseData_IssueTracker_Status.name AS 'statusName',PreciseData_IssueTracker_Issue.subject AS 'subject',PreciseData_IssueTracker_Type.name AS 'typeName',Users.Username AS 'assignedUserName',Users.Username AS 'raiserUserName',PreciseData_IssueTracker_Issue.raiseDate AS 'raiseDate'FROMPreciseData_IssueTracker_Issue INNER JOIN PreciseData_IssueTracker_Status ON PreciseData_IssueTracker_Issue.statusId=PreciseData_IssueTracker_Status.idINNER JOIN PreciseData_IssueTracker_Type ON PreciseData_IssueTracker_Issue.typeId=PreciseData_IssueTracker_Type.idINNER JOIN Users ON Users.UserID=PreciseData_IssueTracker_Issue.assignedUserIdINNER JOIN Users ON Users.UserID=PreciseData_IssueTracker_Issue.raiserUserIdWHERE PreciseData_IssueTracker_Issue.moduleId=@moduleIdORDER BY PreciseData_IssueTracker_Issue.raiseDate DESCGOHow do i make it work?
View 1 Replies
View Related
Sep 20, 2005
Hi
I have a content management system that I am building. My CMS has a
pages table which contains 60 fields, some are varchars, some are ntext
some are dates etc. They have field names which match their purpose
like varchar1, ntext3 etc. These fields are used up depending on which
template is applied to the page.
The templatefields table holds holds the information about each field
in a template. It's control type (rich text control, date control etc)
and the field in the pages table that the data will be stored in
(varchar1,ntext3 etc)
What I want to be able to do is loop through the templatefeilds table
for a particular template and then using the field name for the pages
table, go to the pages table and get the value to populate the control.
So to clarify, I would like to produce a stored procedure which outputs
the page field name (varchar1) from the templatefields table and
varchar1's value in the pages table. Maybe in a temporary table.
Is this possible?
Any guidance would be appreciated..
Thanks in advance
View 1 Replies
View Related
Mar 23, 2006
Hi --
What is the proper way to select results with a date in the where statement when the datatype of the column is datetime?
select * from table where date_field = '3-23-2006' does not get any results.
Thank-you for your help.
View 4 Replies
View Related
Jan 7, 2002
how can I select 10 random rows from a table?
Please help
View 2 Replies
View Related
May 8, 2001
We are developing an Access application that will be used to run adhoc reports against a SQL Server table. Selection criteria is entered on a form, a passthru query is built on the fly, and the results are formatted for output via an Access report.
There are 16 different fields on the query form. Two are date fields (from / to), the rest are text. The user is required to supply a date range for the report. They may specify any combination of the remaining query fields.
Examples:
From/To dates, part number, work order number
From/To dates, location, operation, sales order number, operator
What is the best scheme to use for the indexes? One index for each potential query field? Or, a single index that includes ALL query fields? Or, some other combination?
I should also mention that there will be no realtime updates to the table. On a weekly basis, we will import updates from a mainframe extract (dropping the indexes prior to the import, rebuilding them afterwards).
View 1 Replies
View Related
Jan 25, 2002
I have a database which has a field called fldTimes. basically this field records the number of hits a file gets. How can I choose the most 5 popular files with the greatest hits. Thanks
View 2 Replies
View Related
Oct 10, 2000
Can anyone help me in finding out the database name?
For example, @@SERVERNAME gives you the name of the server
on which you SQL Server is running.
In the same way, is there any global variable which gives me the
name of the database in the context in which I am running my queries or stored procs?
Thanks
Sushruth Nanduri.
View 2 Replies
View Related
Nov 16, 2001
I have a query that returns a certain amount of results. How do I select the last row??? I know I can do the top row by doing (top 1). Basically I need the complete opposite. Please help...
I looked around and couldn't find anything on it.
thanks in advance
View 2 Replies
View Related
Aug 21, 2001
Hello .
Sometimes when i try to select data from a table (from a selected database)
using SQL Query Analyzer (for exemple) i receive an error message : "The Object XX does not exist" . But when i prefix it by the Owner it work .
What is the problem then ?
View 1 Replies
View Related
