Selecting Data Wheere Values Contain Something
Nov 17, 2007
Hi,
I have a message system, where people insert their message to the database, and others pick up their messages by selecting messages that have their username as the reciever ID.
I have just intoduced bulk message sending - sending to multiple users. This requires many usernames being entered into the recievername column, seperated by a comma.
Is there a way to select messages if the column name contains their username, rather than is their username? Because there may be more than one name, I would like everyone that has their name in the column to be able to retrieve the message, even if they arent the only reciever..
Please ask if more explanation is needed!
Thanks,
Jon
View 47 Replies
ADVERTISEMENT
Oct 9, 2015
I am using SSRS 2008 R2 Report Builder 3.0 (10.50.4276.0) . I have simple set of data which has a persons Title and Name e.g. Mr Smith, Miss Jones, Doctor Foster
The report has a parameter where the user can select which records to show based on the matching titles (Mr, Miss, Doctor)
The Query for the report uses Title in (@Title) where @Title is the only parameter which can take multiple values. The report works correctly for any 1 value selected, but as soon as 2 or more values are ticked in the drop down, it fails.
I believe the parameter value is being passed into the query with a comma separating the values e.g. Mr,Miss which causes the IN statement to give an error, as the statement would be where Title IN ('Mr,Miss') which does not match any of the data values.
The parameter value passed needs to be 'Mr','Miss' for the IN statement to work. What statement do I have to put in the report query to get it to select any of the data rows where the title matches any 1 of the selected values?
View 5 Replies
View Related
Jun 17, 2012
I am SSRS user, We have a .net UI from where we want to pass multi select values, but these values are comma separated in the database. how can I write a sql query such that when I select multi values on my UI, the comma separated values are take care of.
View 5 Replies
View Related
Jul 20, 2005
I have to write a master detail query, in which the detail record shouldbe stored in a variable as Comma Seperated Values. Can anyone helpme......Sun*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 5 Replies
View Related
Mar 12, 2007
I have a stored procedure that allows users to select addresses based on partially supplied information from the user. My procedure seems to work fine in all but a few cases. If a user decides to select all the rows for a particular country the procedure below does not return any rows even if the rows exist. I tracked this down to the fact that for Non US countries I set both the StateCode and Country Code to nulls. .
Below is a partial version of my code. Can anyone show me how I can do a "Like" Search even if some of the fields in the row contain null values?
Thanks
1 CREATE PROCEDURE dbo.Addresses_Like( @SendTo VarChar(50) = Null
2 , @AddressLine1 VarChar(50) = Null
3 , @AddressLine2 VarChar(50) = Null
4 , @City VarChar(50) = Null
5 , @StateCode VarChar(2) = Null
6 , @ZipCode VarChar(10) = Null
7 , @CountryCode VarChar(2) = Null)
8
9
10 Declare @SearchSendTo VarChar(50)
11 Declare @SearchAddressLine1 VarChar(50)
12 Declare @SearchAddressLine2 VarChar(50)
13 Declare @SearchCity VarChar(50)
14 Declare @SearchStateCode VarChar(2)
15 Declare @SearchZipCode VarChar(10)
16 Declare @SearchCountryCode VarChar(2)
17
18 If (@SendTo Is Null)
19 Set @SearchSendTo = ""
20 Else
21 Set @SearchSendTo = @SendTo
22
23 If (@AddressLine1 Is Null)
24 Set @SearchAddressLine1 = ""
25 Else
26 Set @SearchAddressLine1 = @AddressLine1
27
28 If (@AddressLine2 Is Null)
29 Set @SearchAddressLine2 = ""
30 Else
31 Set @SearchAddressLine2 = @AddressLine2
32
33 If (@City Is Null)
34 Set @SearchCity = ""
35 Else
36 Set @SearchCity = @City
37
38 If (@StateCode Is Null)
39 Set @SearchStateCode = ""
40 Else
41 Set @SearchStateCode = @StateCode
42
43 If (@ZipCode Is Null)
44 Set @SearchZipCode = ""
45 Else
46 Set @SearchZipCode = @ZipCode
47
48 If (@CountryCode Is Null)
49 Set @SearchCountryCode = ""
50 Else
51 Set @SearchCountryCode = @CountryCode
52
53
54 Select AddressID
55 , SendTo
56 , AddressLine1
57 , AddressLine2
58 , City
59 , StateCode
60 , ZipCode
61 , CountryCode
62 , RowVersion
63 , LastChangedDateTime
64 , OperID
65 From Addresses
66 Where SendTo Like RTrim(LTrim(@SearchSendTo)) + "%"
67 And AddressLine1 Like RTrim(LTrim(@SearchAddressLine1)) + "%"
68 And AddressLine2 Like RTrim(LTrim(@SearchAddressLine2)) + "%"
69 And City Like RTrim(LTrim(@SearchCity)) + "%"
70 And StateCode Like RTrim(LTrim(@SearchStateCode)) + "%"
71 And ZipCode Like RTrim(LTrim(@SearchZipCode)) + "%"
72 And CountryCode Like RTrim(LTrim(@SearchCountryCode)) + "%"
73 Order By CountryCode, City, AddressLine1, AddressLine2, SendTo
View 6 Replies
View Related
May 2, 2008
SELECT
#followups.suspectid,
#followups.planid,
cond4,
cond5,
cond6,
cond7,
cond8,
tbpdmmembers.firstname tbpdmmembers_firstname,
dbo.GetMemID_PartC_D(#followups.hic,#followups.IsPart_C) tbpdmmembers_MemberID,
--tbpdmmembers.Plan1 tbpdmmembers_MemberID,
tbaddress.address1 tbaddress_address1,
tbaddress.address2 tbaddress_address2,
tbaddress.city tbaddress_city,
tbaddress.state tbaddress_state,
tbaddress.zip tbaddress_zip
from #followups
I want to check if the tbaddress.address1 tbaddress_address1 if it is =null or empty then make it = tbaddress.address2 tbaddress_address2, at the same time I make the tbaddress.address2 tbaddress_address2, null. Otherwise leave it as it is.
Actually, I am working with the report and the tbaddress.address1 carrying the apt number. if there is no aprt # then the line print blanks. so that brings the empty line between the street address and the citystate line.
That is what i am tryig to cover. There could be a way to do this from the crystal report but I am thinking of doing this way cause I can't get the solution to do it from the crystal report.
View 5 Replies
View Related
Jul 19, 2015
Select a.uid
, a.name
, mewp.data As Association
from Asset a Join
wshhistory wsh
on a.uid = wsh.assetid
Join worksheet w
on wsh.wshid = w.uid left join
[code]...
When I return the data how do I eliminate the name's that are in bold but keep the association record as this is a relationship between joining tables..
View 7 Replies
View Related
Apr 29, 2008
I have a sql select query that I'm pulling from a "Years" table to link to 3 columns in an Items table.ZCValuesYear table has two colums: YearID and YearYearID Year1 20042 20053 20064 20075 2008...I want to bind the "Year" value to the three colums in the ZCItem table: ItemUseFirstYearID ItemUseLastYearID ItemYearIDThe query below will pull all the "ID's" for each of the colums, but how would I make it pull the "Year" value (instead of record 4, it would pull 2007 instead)?<asp:SqlDataSource ID="sqlItemSelect" runat="server" ConnectionString="<%$ ConnectionStrings:MyConnString %>" SelectCommand="SELECT ZCPartVault.PartVaultID, ZCPartVault.PartVaultItemID, ZCValuesYear.Year, ZCItem.ItemName, ZCItem.ItemUseFirstYearID, ZCItem.ItemUseLastYearID FROM ZCPartVault FULL OUTER JOIN ZCItem ON ZCPartVault.PartVaultItemID = ZCItem.ItemID FULL OUTER JOIN ZCValuesYear ON ZCItem.ItemUseLastYearID = ZCValuesYear.YearID AND ZCItem.ItemUseFirstYearID = ZCValuesYear.YearID AND ZCItem.ItemYearID = ZCValuesYear.YearID" > </asp:SqlDataSource>
View 2 Replies
View Related
Mar 13, 2006
I need to do a SQL query based on the two biggest values of a field. PLS , what s the SQL syntax : select * from Table where PRICE ......Ex: if the values of the field PRICE are : 50, 40, 100, 30 and 150.The request should select the rows that have Price equal 100 or 120Thanks a lot for help
View 2 Replies
View Related
May 19, 2008
Hey all
This is probably the wrong category to post my question in. Apologies if it is.
I have got a Data Flow Task that has an OLE DB Source and a Flat file destination.
Is there a way to do the following:
SELECT id,'31809','C:LCImportDataImages' & id & '.jpg', '1' FROM table1
This obviously doesn't work but I want to insert the id from the table, followed by the value '31809', followed by 'C:LCImportDataImagesid.jpg', followed by '1'
So, the id in 'C:LCImportDataImagesid.jpg' is the same as the id from the table.
I want the file to look like:
1, 31809, C:LCImportDataImages1.jpg, 1
2, 31809, C:LCImportDataImages2.jpg, 1
5, 31809, C:LCImportDataImages5.jpg, 1
etc...
I would really appreciate it if someone could point me to the right direction.
I am trying to work on it..will put up a solution if I find one myself.
Many thanks,
Rupa
View 12 Replies
View Related
Mar 13, 2006
I need to do a SQL query based on the two biggest values of a field. PLS , what s the SQL syntax : select * from Table where PRICE ......
Ex: if the values of the field PRICE are : 50, 40, 100, 30 and 150.
The request should select the rows that have Price equal 100 or 120
Thanks a lot for help
View 5 Replies
View Related
Nov 7, 2006
I am editing a pre-existing view.This view is already bringing data from 40+ tables so I am to modify itwithout screwing with anything else that is already in there.I need to (left) join it with a new table that lists deposits and thedates they are due. What I need is to print, for each record in theview, the due date for the next deposit due and the total of allpayments that they will have made by the next due date.So this is how things are. I join the table and it obviously bringsmultiple records for each record (one for each matching one in the newtable). I need, instead, to be able to make out what due date I shouldprint (the first one that is GETDATE()?) and the total of deposits upto that date.Now, payments can be either dollar amounts or percentages of anotheramount in the view. So if it's an amount I add it, if it's a % Icalculate the amount and add it.Example:for group X of clients...Deposit 1 due on oct 1: $20Deposit 2 due on oct 15: $30Deposit 3 due on nov 15: $40Deposit 4 due on nov 30: $50for group Y of clients...Deposit 1 due on Oct 30: $200Deposit 2 due on Nov 30: $300Deposit 3 due on Dec 30: $400So when if I execute the view today (Nov 7th) each client from group Xshould have:Next Due Date: nov 15. Total: $90 (deposit 1 + deposit 2 + deposit 3)Group Y should have:Next Due Date: Nov 30, total: $500 (Deposit 1 + deposit 2)And so on.
View 4 Replies
View Related
Jan 14, 2007
Hi, i have something like this:
SELECT a.boardname, a.description, a.threadcount, a.answercount, a.lastthreadid, b.username, b.subject, b.created FROM forum_board AS a, forum_topics AS b WHERE (a.forumid = @ID) AND (b.id = a.lastthreadid)
The problem here is that lastthreadid does not always have a post linked to it, so sometimes its null. I want it to still return all the boards and then just returnnull values or "" in b.username, b.subject, b.createdThis returns nothing. How can i force it to select these values?
View 3 Replies
View Related
Jan 9, 2008
Hi. I have an sql query that i use to insert articles to a sql databse table and for that i use addWithValue to select witch textboxes etc goes where in the database.
Now i need to retrive these values and place them back into some other textboxes (some of them multiline) ,and i wonder if there are any similar ways to retrive values like AddWithparameter so i can easily do textBox.text = //whatever goes here ?
View 4 Replies
View Related
Mar 10, 2003
I have a table with one row for each test a user has taken, with columns for userid, score, and test date. I have a query that gets the highest score and the date of the latest test for each user. Easy. But how can I also get the score achieved on the latest test for each agent?
Thanks,
John
(By the way, I've been looking for a good SQL mailing list to ask this question and have been unsuccessful. If there's a better forum than this for this type of question, please let me know).
View 6 Replies
View Related
May 5, 2004
Hi, I have a question regarding how to insert one column values into a table by selecting from different table..Here is the syntax..
------------
insert into propertytable values (select lastvalue+incrementby from agilesequences where name='SEQPROPERTYTABLE', 13926, 0, 4, 1, 451, 1, 8, 1)
the first column in the propertytable will be... select lastvalue+incrementby from agilesequences where name='SEQPROPERTYTABLE'
How do I do that..Help PLZ..
View 3 Replies
View Related
Feb 15, 2008
I have a line chart which works great except when the x axis displays duplicate months. I have tried format codes of MM-YYYY and MMM and have the "numeric or time-scale values" checkbox checked. The data displays fine but the X axis in the case of the MMM format code displays as:
Sep Oct Oct Nov Nov
leaving the user to wonder where exactly does October and November start...
I've googled around but don't see off-hand what I am doing wrong. I am display 3 simultaneous lines if that matters...
Thanks!
Craig
View 4 Replies
View Related
Aug 4, 2006
Hi,
I am pretty new to SSIS. I am trying to create a package which can accept data in any of several formats. i.e. CSV, Excel, a SQL Server database/table and import the data into my destination database.
So far i've managed to get this working OK. However I am now TOTALLY stuck. I'm currently trying to just concentrate on the data sources being a CSV (using a Flat File Data Source) and/or an Excel Spreadsheet.
I can get the data in and to my destination using a UNION ALL component and mapping the data sources to it so long as both the CSV file and the Excel spreadsheet exist.
My problem is that I need my package to handle the possibility that only the CSV file might exist and there is no Excel spreadsheet. In which case i'd like the package to ignore the Excel datasource completely. Currently either of my data sources do not exist I get errors and the package terminates.
Is there any way in SSIS that I can check all my data sources to see which ones exist (i.e. are valid). If they exist I want to use them. If it doesn't exist i'd like to disgard it (without error - as long as there is a single datasource the package should run)
I've tried using the AcquireConnection method in a script task on each of my connections, hoping that it would error if the file/datasource did not exist. It doesn't though (in the case of an Excel datasource it just creates a empty excel file for me).
The only other option I can come up with are to have seperate packages depending on the type of data we want to import and then run a particular package depending on the format of the source data. This seems a bit long winded. I am pretty sure I must be able to do what I want to achieve but I can't work out how.
I'll be grateful to anyone who can send me any tips/hints/links on how I can achieve this.
Many thanks
Rob Gibson
View 5 Replies
View Related
Oct 26, 2015
I have a scenarios where if I execute select * from tbl it should display the all the records without waiting to release any lock. For example suppose I have one table called tbl and one session is updating one records and not committed yet and in other session if i execute select * from table I can see all the records, for that records it can show me older version. but my select statement should not wait to commit another session and also it should not show the modified data.
View 4 Replies
View Related
Feb 23, 2007
I have a DTSX package which reads values from a fixed-length text file using a data reader and writes some of the column values from the file to an Oracle table. We have used this DTSX several times without incident but recently the process started inserting NULL values for some of the columns when there was a valid value in the source file. If we extract some of the rows from the source file into a smaller file (i.e 10 rows which incorrectly returned NULLs) and run them through the same package they write the correct values to the table, but running the complete file again results in the NULL values error. As well, if we rerun the same file multiple times the incidence of NULL values varies slightly and does not always seem to impact the same rows. I tried outputting data to a log file to see if I can determine what happens and no error messages are returned but it seems to be the case that the NULL values occur after pulling in the data via a Data Reader. Has anyone seen anything like this before or does anyone have a suggestion on how to try and get some additional debugging information around this error?
View 12 Replies
View Related
Aug 21, 2001
Hello .
Sometimes when i try to select data from a table (from a selected database)
using SQL Query Analyzer (for exemple) i receive an error message : "The Object XX does not exist" . But when i prefix it by the Owner it work .
What is the problem then ?
View 1 Replies
View Related
Sep 20, 2007
I've got a big problem that I'm trying to figure out:
I have an address table out-of-which I am trying to select mailing addresses for companies UNLESS a mailing address doesn't exist; then I want to select the physical addresses for that company. If I get multiple mailing or physical addresses returned I only want the most recently edited out of those.
I don't need this for an individual ID select, I need it applied to every record from the table.
My address table has some columns that look like:
[AddressID] [int]
[LocationID] [int]
[Type] [nvarchar](10)
[Address] [varchar](50)
[City] [varchar](50)
[State] [char](2)
[Zip] [varchar](5)
[AddDate] [datetime]
[EditDate] [datetime]
AddressID is a primary-key non-null column to the address table and the LocationID is a foreign key value from a seperate Companies table.
So there will be multiple addresses to one LocationID, but each address will have it's own AddressID.
How can I do this efficiently with perfomance in mind???
Thank you in advance for any and all replies...
View 2 Replies
View Related
Mar 25, 2002
I'm stuck. I have a table that I want to pull some info from that I don''t know how to.
There are two colomuns, one is the call_id column which is not unique and the other is the call_status column which again is not unique. The call_status column can have several values, they are ('1 NEW','3 3RD RESPONDED','7 3RD RESOLVED','6 PENDING','3 SEC RESPONDED','7 SEC RESOLVED').
i.e example, this is the existing data.
Call_id Call_Status
555555 3 3RD RESPONDED
235252 7 SEC RESOLVED
555555 7 3RD RESOLVED
325252 6 PENDING
555555 6 PENDING
325235 3 SEC RESPONDED
555555 1 NEW
This is the data I want...
Call_id Call_Status
555555 3 3RD RESPONDED
555555 6 PENDING
555555 7 3RD RESOLVED
The call_id could be any number, I only want the 6 PENDING rows where there are other rows for that call_id which have either 3 3RD RESPONDED or 7 3RD RESOLVED. If someone knows how it would be a great help.
Cheers,
Chris
View 1 Replies
View Related
Feb 12, 2006
Plugging away at my little message board that I am working on, I have hit another SQL snag. I am trying to select a list of all posts in a thread. I have to get each post, the name of the poster (which comes from a different table - referenced by userid), as well as some profil information, from a 3rd table (also referenced by the userid).
View 2 Replies
View Related
Jan 28, 2004
Iam farely new to this so sorry for the newbie question.. but how do you select all data from one table and insert that data into the same table but in another sql database.
View 5 Replies
View Related
Apr 20, 2008
Hey guys,
I was wondering if this is possible I have to be able to just select the number before the '-' in acolumn which is formatted like 123-456 so I just need the the 123 part.
Any ideas how this can be achieved?
Thanks.
View 8 Replies
View Related
Jan 19, 2007
Hi all
I am having problem in selecting the data from my datalist. Here is teh sample code
<asp:datalist id="dlAttrName" runat="server" OnItemCommand="dlAttrName_SelectData" DataKeyField="attrID">
<ItemTemplate>
<asp:LinkButton ID="lbSelect" Runat="server" CommandName="Select" style="display:none">Select</asp:LinkButton>
<%# Container.DataItem("attrDef1")%>
</ItemTemplate>
</asp:DataList>
Private Sub dlAttrName_ItemDataBound(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.DataListItemEventArgs) Handles dlAttrName.ItemDataBound
If e.Item.ItemType = ListItemType.Item Or e.Item.ItemType = ListItemType.AlternatingItem Then
'Add eventhandlers for highlighting
'a DataListItem when the mouse hovers over it.
e.Item.Attributes.Add("onmouseover","????")
e.Item.Attributes.Add("onmouseout", "????")
'Add eventhandler for simulating
'a click on the 'SelectButton'
e.Item.Attributes.Add("onclick", ?????????????????????, String.Empty))
??????????????????? this should have something like this
Me.Page.ClientScript.GetPostBackEventReference(e.Item.Controls(1)
But I am not able to get the ClientScript option, I don't know which namespace should I import?
I don't know whether I am right or not.
Its urgent please reply back soon,any help will be useful.
Thanks!!!!!!!
View 1 Replies
View Related
Jan 21, 2008
I have three tables that are joined together to retrieve a piece of data.Table One has the columns pid1(PK), idTable Two has the columns pid1, qid1, idTable three has columns qid1, question, answerHere is my sql statement:SELECT Table1.pid1, Table2.qid1, Table3.Question FROM Table1 JOIN Table2 ON Table1.pid1=Table2.pid1 JOIN Table3 ON Table2.qid1=Table3.qid1 WHERE Table1.pid=...(N)I put an elipsis because I'm stuck on how to proceed from here. See I need to randomly select a value from column pid1 in table1 then use this value to replace N in the sql statement, then have the statement run and randomly return exactly one piece of data instead.Is this possible? How can you randomly get one piece of data from joining three table without a WHERE CLAUSE.
View 1 Replies
View Related
Apr 30, 2006
For some reason this is just not "clicking" with me and the longer I stare at it the more I overcomplicate things and then I just confuse myself further...
Provided this relation showing where "pkey" and "skey" met on "ServiceDate":
Code:
skey pkey ServiceDate
--------------------------------------
123 1 11/12/2005
124 1 10/12/2005 *
123 2 10/02/2005
124 2 10/12/2005
124 2 11/12/2005
123 2 11/02/2005
I need to select out a list of distinct pkeys and skeys only when there was no meeting between the two in November 2005. In other words, this query would produce only one record - the starred record - when run against this sample table. This is because even though, for example, skey 124 / pkey 2 has an entry outside the desired range, it also has one inside the desired range. The same goes for the record outside our range for 123 and 2 - it also has a record inside our range.
At this point, I've come to the conclusion that I can first select all the distinct pkeys and skeys where the servicedate is not in 11/2005 then join it to a selection of distinct pkeys and skeys where the servicedate IS in the desired date range. Does that seem like the most straightforward way through this?
I don't get the impression that this is that complicated a problem, but it's one of those deals where I goofed up somewhere along the line, and now I think I'm really overthinking the problem, so I'd be much obliged if someone could give me a hearty slap to clear the ol' noggin.
View 1 Replies
View Related
Dec 6, 2005
Hi,
I have suddenly developed a problem when trying to select from a table. Even a standard select * from generates a SQL Dump exception handler. The table is below:
CREATE TABLE [Stagetb_GIDeptGroup] (
[f_GIImportID] [int] IDENTITY (1, 1) NOT NULL ,
[f_GIAction] [int] NOT NULL CONSTRAINT [DF_stagetb_GIDeptGroup_f_GIAction] DEFAULT (0),
[f_ImportBatchID] [int] NULL ,
[f_VisualDeptGroupID] [int] NULL ,
[f_DeptGroupName] [varchar] (40) COLLATE Latin1_General_CI_AS NULL ,
[f_DeptGroupTarget] [d_Percentage] NULL ,
[f_ExternalDeptGroupID] [int] NULL ,
[f_StatusID] [int] NOT NULL CONSTRAINT [DF_stagetb_GIDeptGroup_f_StatusID] DEFAULT (0),
[f_StatusDetailID] [int] NOT NULL CONSTRAINT [DF_stagetb_GIDeptGroup_f_StatusDetailID] DEFAULT (0),
CONSTRAINT [PK_stagetb_GIDeptGroup] PRIMARY KEY CLUSTERED
(
[f_GIImportID]
) ON [PRIMARY]
) ON [PRIMARY]
GO
When i run a dbcc checkdb it finds nothing, if i try and connect from a remote connection i get a general network error and when connecting from the local machine i get this Dump exception error:
2005-12-06 08:40:55.28 spid53 Error: 0, Severity: 19, State: 0
2005-12-06 08:40:55.28 spid53 language_exec: Process 53 generated an access violation. SQL Server is terminating this process..
2005-12-06 08:40:57.76 spid53 Using 'sqlimage.dll' version '4.0.5'
Stack Dump being sent to C:Program FilesMicrosoft SQL ServerMSSQLlogSQL00010.dmp
2005-12-06 08:40:57.76 spid53 Error: 0, Severity: 19, State: 0
2005-12-06 08:40:57.76 spid53 SqlDumpExceptionHandler: Process 53 generated fatal exception c0000005 EXCEPTION_ACCESS_VIOLATION. SQL Server is terminating this process..
************************************************** *****************************
*
* BEGIN STACK DUMP:
* 12/06/05 08:40:57 spid 53
*
* Exception Address = 00425E61
* Exception Code = c0000005 EXCEPTION_ACCESS_VIOLATION
* Access Violation occurred reading address 00000000
* Input Buffer 70 bytes -
* select * from stagetb_GIDeptGroup
*
*
* MODULE BASE END SIZE
* sqlservr 00400000 00B19FFF 0071a000
* ntdll 77F50000 77FF6FFF 000a7000
* kernel32 77E60000 77F45FFF 000e6000
* ADVAPI32 77DD0000 77E5CFFF 0008d000
* RPCRT4 78000000 78085FFF 00086000
* USER32 77D40000 77DC5FFF 00086000
* GDI32 7E090000 7E0D0FFF 00041000
* OPENDS60 41060000 41065FFF 00006000
* MSVCRT 77C10000 77C62FFF 00053000
* UMS 41070000 4107CFFF 0000d000
* SQLSORT 42AE0000 42B6FFFF 00090000
* MSVCIRT 002A0000 002AFFFF 00010000
* sqlevn70 41080000 41086FFF 00007000
* NETAPI32 71C20000 71C6DFFF 0004e000
* wmi 76D30000 76D33FFF 00004000
* SSNETLIB 42CF0000 42D05FFF 00016000
* WSOCK32 71AD0000 71AD7FFF 00008000
* WS2_32 71AB0000 71AC4FFF 00015000
* WS2HELP 71AA0000 71AA7FFF 00008000
* SSNMPN70 410D0000 410D5FFF 00006000
* security 71F80000 71F83FFF 00004000
* SECUR32 76F90000 76F9FFFF 00010000
* crypt32 762C0000 76347FFF 00088000
* MSASN1 762A0000 762AFFFF 00010000
* VERSION 77C00000 77C06FFF 00007000
* userenv 75A70000 75B14FFF 000a5000
* mswsock 71A50000 71A8AFFF 0003b000
* DNSAPI 76F20000 76F44FFF 00025000
* winrnr 76FB0000 76FB6FFF 00007000
* WLDAP32 76F60000 76F8BFFF 0002c000
* rasadhlp 76FC0000 76FC4FFF 00005000
* wshtcpip 71A90000 71A97FFF 00008000
* SSmsLPCn 42CD0000 42CD6FFF 00007000
* ntdsapi 767A0000 767B2FFF 00013000
* msv1_0 76D10000 76D2CFFF 0001d000
* OLE32 771B0000 772D0FFF 00121000
* CLBCATQ 76FD0000 77047FFF 00078000
* OLEAUT32 77120000 771AAFFF 0008b000
* COMRes 77050000 77114FFF 000c5000
* sqloledb 01D80000 01DF2FFF 00073000
* MSDART 74C50000 74C6EFFF 0001f000
* COMCTL32 77340000 773CAFFF 0008b000
* comdlg32 763B0000 763F4FFF 00045000
* SHLWAPI 70A70000 70AD4FFF 00065000
* SHELL32 773D0000 77BC1FFF 007f2000
* MSDATL3 60E30000 60E44FFF 00015000
* comctl32 71950000 71A33FFF 000e4000
* oledb32 02020000 02084FFF 00065000
* OLEDB32R 01E00000 01E0FFFF 00010000
* xpsqlbot 42F00000 42F05FFF 00006000
* xpstar 410F0000 41133FFF 00044000
* SQLUNIRL 5C1B0000 5C1DCFFF 0002d000
* WINSPOOL 73000000 73022FFF 00023000
* SQLRESLD 42AC0000 42AC6FFF 00007000
* SQLSVC 42C40000 42C56FFF 00017000
* ODBC32 02150000 02181FFF 00032000
* odbcbcp 02190000 02195FFF 00006000
* W95SCM 41140000 4114BFFF 0000c000
* NDDEAPI 75940000 75946FFF 00007000
* odbcint 022B0000 022C5FFF 00016000
* clusapi 55560000 55570FFF 00011000
* resutils 750B0000 750C0FFF 00011000
* SQLSVC 43970000 43975FFF 00006000
* xpstar 439E0000 439EBFFF 0000c000
* DBGHELP 02420000 02432FFF 00013000
* msdbi 6BE90000 6BEABFFF 0001c000
* sqlimage 4A400000 4A40CFFF 0000d000
*
* Edi: 1ADA13F4: 00000000 1ADA1758 00000000 1ADA1400 00000001 00000000
* Esi: 00000000:
* Eax: 1ADA13E0: 009802E4 00000032 00000000 00000000 00000000 00000000
* Ebx: 1ADA13E0: 009802E4 00000032 00000000 00000000 00000000 00000000
* Ecx: 00000000:
* Edx: 1ADA1410: 00000000 6E006100 00000000 00000000 00000000 1ADA0030
* Eip: 00425E61: 7589018B 8B10FFFC F44D8BF0 A5A5A5A5 5EC38B5F 0D89645B
* Ebp: 0213DFE8: 0213E01C 004C4EB7 1ADA0020 00000000 1ADA1168 1ADC84D0
* SegCs: 0000001B:
* EFlags: 00010282: 0050004F 00300048 00300033 00560030 004F0042 004E0000
* Esp: 0213DFCC: 1ADA07F0 1ADA0020 00A0A4A0 1ADA13E0 0213E010 0092D7B0
* SegSs: 00000023:
************************************************** *****************************
-------------------------------------------------------------------------------
Short Stack Dump
00425E61 Module(sqlservr+00025E61)
004C4EB7 Module(sqlservr+000C4EB7)
0049DCD9 Module(sqlservr+0009DCD9)
0049DAF9 Module(sqlservr+0009DAF9)
00447078 Module(sqlservr+00047078)
004510FE Module(sqlservr+000510FE)
00415080 Module(sqlservr+00015080)
004592CE Module(sqlservr+000592CE)
005A7208 Module(sqlservr+001A7208) (SQLExit(unsigned long)+000523F6)
005A7099 Module(sqlservr+001A7099) (SQLExit(unsigned long)+00052287)
00446A83 Module(sqlservr+00046A83)
004510FE Module(sqlservr+000510FE)
00415080 Module(sqlservr+00015080)
004592CE Module(sqlservr+000592CE)
0041534F Module(sqlservr+0001534F)
00459A54 Module(sqlservr+00059A54)
004175D8 Module(sqlservr+000175D8)
410735D0 Module(UMS+000035D0) (UmsSystemUserContext::UmsSystemUserContext(class UmsScheduler *,struct UMS_SYSPARAMS *)+00000434)
4107382C Module(UMS+0000382C) (UmsScheduler::FiberEnabled(void)+000001D2)
77C37E53 Module(MSVCRT+00027E53) (_endthread+000000AA)
77E7D33B Module(kernel32+0001D33B) (RegisterWaitForInputIdle+00000043)
I am running Windows XP Professional & MSDE Service Pack 3. Any ideas anyone?
View 1 Replies
View Related
May 24, 2015
preparation of a query to get the data from xml which has xmlns in first few lines.
Here I am attaching the xml file(not able to attach ".xml" file, so converted it to ".txt" ).
View 9 Replies
View Related
Jun 3, 2008
Have a column in my DB called _Venue, which has been populated with address information separated by commas, like this:
Address1,address2,address3,address4
The address has sometimes only a few lines, for example I may have just Address1 or just address1 and address2 filled etc.
I need to write a query that will individually select addressX, so I can pick and choose what part of the full address to use.
Can these be done?
Thanks in advance.
View 9 Replies
View Related
Aug 4, 2013
I have an action log table which records when a registrant record was viewed by a compnay employee. I have an sql query like this:
SELECT [ID]
,[RegistrantID]
,[EmployeeID]
,[UserID]
,[CompanyID]
[Code] ....
and data is like this:
IDRegistrantID EmployeeIDUserID CompanyID VacancyID Action ActionDate
17931629515163213NULL 42013-08-04 16:45:40.457
17921629215163213NULL 42013-08-04 16:45:33.003
1791NULL15163213NULL 32013-08-04 16:45:23.660
1790162959162893NULL 42013-08-04 16:45:09.543
[Code] ....
I want to select distinct views to a registrantid record ( the first ones) in one year. if a registrant was viewed 10 tmes a year then it will show only first time it was viewed. If it was viewed 10 times by an employeed in 2 years then it will show first time it was viewed. if it was viewed by 2 employees of same company 10 times in one year then it first time viewed record will be shown. if it was seen 10 times by 2 employees of two different companies in one year then first record of two companies will be shown. do i need to use group by or what ?
View 1 Replies
View Related
